Interaction of chitosans and their N-acylated derivatives with lipopolysaccharide of gram-negative bacteria

The interactions of lipopolysaccharide (LPS) with the natural polycation chitosan and its derivatives--high molecular weight chitosans (80 kD) with different degree of acetylation, low molecular weight chitosan (15 kD), acylated oligochitosan (5.5 kD) and chitooligosaccharides (biose, triose, and tetraose)--were studied using ligand-enzyme solid-phase assay. The LPS-binding activity of chitosans (80 kD) decreased with increase in acetylation degree. Affinity of LPS interaction with chitosans increased after introduction of a fatty acid residue at the reducing end of chitosan. Activity of N-monoacylated chitooligosaccharides decreased in the order: oligochitosan --> tetra- > tri- --> disaccharides. The three-dimensional structures of complexes of R-LPS and chitosans with different degree of acetylation, chitooligosaccharides, and their N-monoacylated derivatives were generated by molecular modeling. The number of bonds stabilizing the complexes and the energy of LPS binding with chitosans decreased with increase in acetate group content in chitosans and resulted in changing of binding sites. It was shown that binding sites of chitooligosaccharides on R-LPS overlapped and chitooligosaccharide binding energies increased with increase in number of monosaccharide residues in chitosan molecules. The input of the hydrophobic fragment in complex formation energy is most prominent for complexes in water phase and is due to the hydrophobic interaction of chitooligosaccharide acyl fragment with fatty acid residues of LPS.     

Interaction of N-acylated and N-alkylated chitosans included in liposomes with lipopolysaccharide of gram-negative bacteria

The interactions of lipopolysaccharide (LPS) with the polycation chitosan and its derivatives — high molecular weight chitosans (300 kDa) with different degree of N-alkylation, its quaternized derivatives, N-monoacylated low molecular weight chitosans (5.5 kDa) — entrapped in anionic liposomes were studied. It was found that the addition of chitosans changes the surface potential and size of negatively charged liposomes, the magnitudes of which depend on the chitosan concentration. Acylated low molecular weight chitosan interacts with liposomes most effectively. The binding of alkylated high molecular weight chitosan with liposomes increases with the degree of its alkylation. The analysis of interaction of LPS with chitoliposomes has shown that LPS-binding activity decreased in the following order: liposomes coated with a hydrophobic chitosan derivatives > coated with chitosan > free liposomes. Liposomes with N-acylated low molecular weight chitosan bind LPS more effectively than liposomes coated with N-alkylated high molecular weight chitosans. The increase in positive charge on the molecules of N-alkylated high molecular weight chitosans at the cost of quaternization does not lead to useful increase in efficiency of binding chitosan with LPS. It was found that increase in LPS concentration leads to a change in surface ζ-potential of liposomes, an increase in average hydrodynamic diameter, and polydispersity of liposomes coated with N-acylated low molecular weight chitosan. The affinity of the interaction of LPS with a liposomal form of N-acylated chitosan increases in comparison with free liposomes. Computer simulation showed that the modification of the lipid bilayer of liposomes with N-acylated low molecular weight chitosan increases the binding of lipopolysaccharide without an O-specific polysaccharide with liposomes due to the formation of additional hydrogen and ionic bonds between the molecules of chitosan and LPS.     

Relevance of molecular weight of chitosan and its derivatives and their antioxidant activities in vitro

The antioxidant potency of different molecular weight (DMW) chitosan and sulfated chitosan derivatives was investigated employing various established in vitro systems, such as superoxide (O(2)(.-))/hydroxyl ((-.)OH) radicals scavenging, reducing power, iron ion chelating. As expected, we obtained several satisfying results, as follows: firstly, low molecular weight chitosan had stronger scavenging effect on O(2)(.-) and (-.)OH than high molecular weight chitosan. For example the O(2)(.-) scavenging activity of low molecular weight chitosan (9 kDa) and high molecular weight chitosan (760 kDa) were 85.86% and 35.50% at 1.6 mg/mL, respectively. Secondly, comparing with DMW chitosan, DMW sulfated chitosans had the stronger inhibition effect on O(2)(.-). At 0.05 mg/mL, the scavenging activity on O(2)(.-) reached 86.26% for low molecular weight chitosan sulfate (9 kDa), but that of low molecular weight chitosan (9 kDa) was 85.86% at 1.6 mg/mL. As concerning chitosan and sulfated chitosan of the same molecular weight, scavenging activities of sulfated chitosan on superoxide and hydroxyl radicals were more pronounced than that of chitosan. Thirdly, low molecular weight chitosan sulfate had more effective scavenging activity on O(2)(.-) and (-.)OH than that of high molecular weight chitosan sulfate. Fourthly, DMW chitosans and sulfated chitosans were efficient in the reducing power, especially LCTS. Their orders were found to be LCTS>CTS4>HCTS>CTS3>CTS2>CTS1>CTS. Fifthly, CTS4 showed more considerable ferrous ion-chelating potency than others. Finally, the scavenging rate and reducing power of DMW chitosan and sulfated derivatives increased with their increasing concentration. Moreover, change of DMW sulfated chitosans was the most pronounced within the experimental concentration. However, chelating effect of DMW chitosans were not concentration dependent except for CTS4 and CTS1.     

Chitosan antiviral activity: Dependence on structure and depolymerization method

Enzymatic (the action of lysozyme) and chemical (the action of hydrogen peroxide) hydrolysis of chitosans with various degree of acetylation (DA)—25, 17, and 1.5%—was performed. Purification and fractioning of the hydrolysis products were performed using dialysis, ultrafiltration, and gel-penetrating chromatography. Low-molecular (LM) derivatives of the polysaccharide with molecular masses from 17 to 2 kDa were obtained. The study of their antiviral activity against the tobacco mosaic virus (TMV) showed that these samples inhibited the formation of local necroses induced by the virus for 50–90%. The antiviral activity of the LM chitosans significantly increased with the lowering of their polymerization degree. Furthermore, the products of the enzymatic hydrolysis possessed lower activity than the chitosan samples obtained as a result of chemical hydrolysis. It was revealed that the exhibition of the antiviral activity weakly depended on the degree of acetylation of the samples.     

Low-molecular-weight chitosans derived from β-chitin: preparation, molecular characteristics and aggregation activity

Preparation, molecular characteristics, and aggregation activity of low-molecular-weight chitosans derived from β-chitin have been studied in comparison with those of chitosans from -chitin. Chitosan derived from β-chitin was partially degraded with alkali and acid to prepare chitosans with reduced molecular weights. The reaction was also conducted with chitosan from -chitin, but it was less susceptible to the degradation than chitosan from β-chitin. The resulting two series of chitosans had molecular weights ranging from 11 to 436 kDa. GPC analysis showed similar changes in the molecular weight distribution in the progress of main chain cleavage of the two kinds of chitosans. The polydispersity values were 2.01–4.16, indicating relatively narrow molecular weight distributions. These chitosans aggregated bovine serum albumin efficiently, and the aggregation behavior was dependent on the molecular weight and concentration of chitosan in addition to the pH of the media and concentration of sodium chloride. The aggregation activity of chitosans from β-chitin was found to be somewhat higher than that of chitosans from -chitin.     

壳聚糖对植物病原细菌的抑制作用研究

本文通过测定最小抑制浓度和相对抑制率,观察了分子量和脱乙酰度对壳聚糖抑制植物病原细菌(胡萝卜软腐欧文氏菌Erwinia cartovara Var carotovara、油菜黄单孢菌绒毛草致病菌Xanthamonas campestris Pv holcicola、丁香假单孢菌黍致病变种Pseudomonas spyings Pv panici)作用的影响。结果表明：在一定范围内,随分子量和脱乙酰度的增大,壳聚糖的抑菌效果相应降低,而且各种病原细菌对不同,壳聚糖的敏感性也有很大差异。     

Evaluation of chitosans and Pichia guillermondii as growth inhibitors of Penicillium digitatum

Chitosans were obtained by room-temperature-homogeneous-deacetylation (RTHD) and freeze-pump-out-thaw-heterogeneous-deacetylation (FPT) from chitins purified from fermentations. Commercial chitosan was deacetylated by three-FPT-cycles. Chitosans and Pichia guillermondii were evaluated on the growth of Penicillium digitatum. Medium molecular weight (M(W)) chitosans displayed higher inhibitory activity against the yeast than low M(W) biopolymers. Chitosans with low degree of acetylation (DA) were inhibitory for yeast and mould. Therefore, a low M(W) and high DA chitosan was selected for use against moulds combined with yeasts. Biopolymer and yeasts presented an additive effect, since chitosans were effective to delay spore germination, whereas yeast decreased apical fungal growth.     

Low molecular weight chitosans: preparation with the aid of papain and characterization

Low molecular weight chitosans (LMWC) of different molecular weight (4.1-5.6 kDa) were obtained by the depolymerization of chitosan using papain (from Carica papaya latex, EC. 3.4.22.2) at optimum conditions of pH 3.5 and 37 degrees C for 1-5 h. Scanning electron microscopy (SEM) showed approximately 15-fold decrease in the particle size after depolymerization. Decrease in the molecular weight was associated with decrease in the degree of acetylation (DA) as evidenced by circular dichroism (CD), FT-IR and solid-state CP-MAS 13C-NMR data. X-ray diffraction pattern revealed slight decrease in the crystallinity index (CrI) whereas the 13C-NMR data showed molecular inhomogeneity. LMWC showed lytic effect towards Bacillus cereus and Escherichia coli more efficiently than native chitosan. The growth inhibitory effect was maximal towards B. cereus, with minimum inhibitory concentration (MIC) of 0.01% (w/v).     

Effect of ultrasonic treatment on the biochemphysical properties of chitosan

Four chitosans with different molecular weights and degrees of deacetylation degree and 28 chitosans derived from these initial chitosans by ultrasonic degradation have been characterized by gel permeation chromatography (GPC), FT-IR spectroscopy, X-ray diffraction and titrimetric analyses. Antimicrobial activities were investigated against E. coli and S. aureus using an inhibitory rate technique. The results showed that ultrasonic treatment decreased the molecular weight of chitosan, and that chitosan with higher molecular weight and higher DD was more easily degraded. The polydispersity decreased with ultrasonic treatment time, which was in linear relationship with the decrease of molecular weight. Ultrasonic degradation changed the DD of initial chitosan with a lower DD (<90%), but not the DD of the initials chitosan with a higher DD (>90%). The increased crystallinity of ultrasonically treated chitosan indicated that ultrasonic treatment changed the physical structure of chitosan, mainly due to the decrease of molecular weight. Ultrasonic treatment enhanced the antimicrobial activity of chitosan, mainly due to the decrease of molecular weight.     

Evaluation of a method for the determination of antibacterial activity of chitosan

A method for the determination of the antimicrobial activity of chitosan with the use of organic salts for the production of pH in the range of 5.5–8.2 was studied. The double-dilution method demonstrated the effectiveness of the determination of the antimicrobial activity of chitosan samples with different molecular weights and solubilities. It was found that the antibacterial activity increased at low pH values with increasing molecular weight, but chitosans with a molecular weight of 5–6 kDa showed higher activity at neutral and slightly alkaline pH levels. Determination of the antimicrobial activity of various chitosan samples at different pH values allowed a more reliable assessment of the potential biological activity of chitosan.     

Non-specific depolymerization of chitosan by pronase and characterization of the resultant products.

Pronase (type XXV serine protease from Streptomyces griseus) efficiently depolymerizes chitosan, a linear beta-->1,4-linked polysaccharide of 2-amino-deoxyglucose and 2-amino-2-N-acetylamino-D-glucose, to low-molecular weight chitosans (LMWC), chito-oligomers (degree of polymerization, 2-6) and monomer. The maximum depolymerization occurred at pH 3.5 and 37 degrees C, and the reaction obeyed Michaelis-Menten kinetics with a Km of 5.21 mg.mL(-1) and Vmax of 138.55 nmoles.min(-1).mg(-1). The molecular mass of the major product, LMWC, varied between 9.0 +/- 0.5 kDa depending on the reaction time. Scanning electron microscopy of LMWC showed an approximately eightfold decrease in particle size and characterization by infrared spectroscopy, circular dichroism, X-ray diffractometry and 13C-NMR revealed them to possess a lower degree of acetylation, hydration and crystallinity compared to chitosan. Chitosanolysis by pronase is an alternative and inexpensive method to produce a variety of chitosan degradation products that have wide and varied biofunctionalities.     

Fractionation and characterization of chitosan by analytical SEC and H NMR after semi-preparative SEC

Heterogeneity in molecular weight and degree of deacetylation (DDA) of chitosans from different sources and preparation methods were studied by fractionating chitosans, using semi-preparative SEC, and then determining molecular weight profiles of fractions by analytical SEC with multi-angle laser light scattering (SEC–MALLS), and degree of deacetylation (DDA) by ¹H NMR. Fractionation of two high molecular weight chitosans from different manufacturers, produced fractions that spanned a wide range of molecular weight (number-average M_n), from 65 to 400 kDa in one case, that was not evident when unfractionated material was directly analyzed by SEC providing M_n = 188 kDa and PDI = M_w/M_n = 1.73. In a second case, fractions ranged from 20 to 600 kDa with unfractionated M_n = 145 kDa and PDI = 1.83. Fractionation of low molecular weight chitosans also showed a broad range of molecular weight in the original material, however, the fractions obtained with the TSKgel G4000W column in the M_n range of 5–100 kDa were essentially monodisperse with PDIs between 1.0 and 1.4. The DDA of one low molecular weight chitosan (10 kDa) produced by nitrous acid degradation was dependent on the M_n of the fraction. This semi-preparative fractionation procedure revealed important compositional heterogeneities of chitosans not evident in unfractionated material, and permitted the production of monodisperse low molecular weight chitosans with homogeneous properties.     

Catalytic activity and the stability of horseradish peroxidase increase as a result of its incorporation into a polyelectrolyte complex with chitosan

The incorporation of horseradish peroxidase into polyelectrolyte complexes with chitosans of different molecular weights (MW 5–150 kDa) yielded highly active and stable enzyme preparations. As a result of the selection of optimal conditions for the formation of peroxidase-chitosan complexes, it was found that 0.1% chitosan with a MW of 10 kDa had the strongest activatory effect on peroxidase (activation degree, >70%) in the reaction of o-dianisidine oxidation by hydrogen peroxide. The complex formed by 0.001% chitosan with a molecular weight of 150 kDa was most stable: when immobilized on foamed polyurethane, it retained at least 50% of the initial activity for 550 days. The highest catalytic activity was exhibited in a 0.05 M phthalate buffer (pH 5.9–6.2) by the complex containing 0.006–0.009% chitosan in the indicator reaction. The activatory effect of the polysaccharide on the enzyme was determined by its influence on the binding and conversion of the reducting substrate peroxidase.     

Low molecular weight chitosans--preparation with the aid of pronase, characterization and their bactericidal activity towards Bacillus cereus and Escherichia coli

The homogeneous low molecular weight chitosans (LMWC) of molecular weight 9.5-8.5 kDa, obtained by pronase catalyzed non-specific depolymerization (at pH 3.5, 37 degrees C) of chitosan showed lyses of Bacillus cereus and Escherichia coli more efficiently (100%) than native chitosan (<50%). IR and (1)H-NMR data showed decrease in the degree of acetylation (14-19%) in LMWC compared to native chitosan ( approximately 26%). Minimum inhibitory concentration of LMWC towards 10(6) CFU ml(-1) of B. cereus was 0.01% (w/v) compared to 0.03% for 10(4) CFU ml(-1) of E. coli. SEM revealed pore formation as well as permeabilization of the bacterial cells, as also evidenced by increased carbohydrate and protein contents as well as the cytoplasmic enzymes in the cell-free supernatants. N-terminal sequence analyses of the released proteins revealed them to be cytoplasmic/membrane proteins. Upon GLC, the supernatant showed characteristic fatty acid profiles in E. coli, thus subscribing to detachment of lipopolysaccharides into the medium, whereas that of B. cereus indicated release of surface lipids. The mechanism for the observed bactericidal activity of LMWC towards both Gram-positive and Gram-negative bacteria has been discussed.     

N-(2-Carboxyethyl)chitosans: regioselective synthesis,characterisation and protolytic equilibria

N-(2-Carboxyethyl)chitosans were obtained by reaction of low molecular weight chitosan with a low degree of acetylation and 3-halopropionic acids under mild alkaline media (pH 8-9, NaHCO3) at 60 degrees C. The chemical structure of the derivatives obtained was determined by 1H and 13C NMR spectroscopies. It was found that alkylation of chitosan by 3-halopropionic acids proceeds exclusively at the amino groups. The products obtained are described in terms of their degrees of carboxyethylation and ratio of mono-, di-substitution and free amine content. The protonation constants of amino and carboxylate groups of a series of N-(2-carboxyethyl)chitosans were determined by pH-titration at ionic strength 0.1 M KNO3 and 25 degrees C.     

Molecular weight and pH effects of aminoethyl modified chitosan on antibacterial activity in vitro

Aminoethyl modified chitosan derivatives (AEMCSs) with different molecular weight (Mw) were synthesized by grafting aminoethyl group on different molecular weight chitosans and chitooligosaccharide. FTIR, (1)H NMR, (13)C NMR, elemental analysis and potentiometric titration results showed that branched polyethylimine chitosan was synthesized. Clinical Laboratory Standard Institute (CLSI) protocols were used to determine MIC for Gram-negative strain of Escherichia coli under different pH. The antibacterial activity of the derivatives was significantly improved compared with original chitosans, with MIC values against E. coli varying from 4 to 64 μg/mL depending on different Mw and pH. High molecular weight seems to be in favor of stronger antibacterial activity. At pH 7.4, derivatives with Mw above 27 kDa exhibited equivalent antibacterial activity (16 μg/mL), while oligosaccharide chitosan derivative with lower Mw (~1.4 kDa) showed decreased MIC of 64 μg/mL. The effect of pH on antibacterial activity is more complicated. An optimal pH for HAEMCS was found around 6.5 to give MIC as low as 4 μg/mL, while higher or lower pH compromised the activity. Cell integrity assay and SEM images showed evident cell disruption, indicating membrane disruption may be one possible mechanism for antibacterial activity.     

Microwave-assisted degradation of chitosan for a possible use in inhibiting crop pathogenic fungi

Degradation of chitosan by H(2)O(2) under microwave irradiation was investigated. The oxidative degradation of chitosan was highly accelerated by microwave irradiation under the condition of low temperature and low concentration of H(2)O(2). The degraded chitosans with low molecular weight (M(w)) were characterized by gel permeation chromatography, Fourier-transform infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray diffraction and elemental analysis. The decrease of M(w) led to transformation of crystal structure and increase of water solubility, whereas no significant chemical structure change in the backbone of chitosan was observed. Antifungal activities of chitosans with different M(w) against crop pathogenic fungi Phomopsis asparagi, Fusarium oxysoporum f. sp. Vasinfectum and Stemphylium solani were investigated at the concentrations of 100, 200 and 400mg/L. All degraded chitosans with low M(w) exhibited enhanced antifungal activity compared with original chitosan and the chitosan of 41.2kDa showed the highest activity. At 400mg/L, the chitosan of 41.2kDa inhibited growth of P. asparagi at 89.3%, stronger than polyoxin and triadimefon, the inhibitory effects of which were found to be 55.5% and 68.5%. All the results indicated that oxidative degradation under microwave irradiation was a promising technique for large-scale production of low M(w) chitosan for use in crop protection.     

Antibacterial effects of water-soluble low-molecular-weight chitosans on different microorganisms

Low-molecular-weight chitosans with a viscosity-average molecular weight (Mv) of 5 to 27 kDa and equal degree of deacetylation (DD, 85%) were highly active against Pseudomonas aureofaciens, Enterobacter agglomerans, Bacillus subtilis, and Bifidobacterium bifidum 791, causing death of 80 to 100% of cells. An exception to this tendency was Escherichia coli, for which the rate of cell death, induced by the 5-kDa chitosan, was 38%. The antibacterial effect was manifested as early as 10 min after incubation of 12-kDa chitosan with B. subtilis or E. coli cells. Candida krusei was almost insensitive to the above crab chitosans. However, Candida krusei was highly sensitive to chitosans with Mv 5, 6, 12, 15.7, and 27 kDa: the minimum inhibitory concentration (MIC) varied from 0.06 to 0.005%. Chitosans with M, 5, 12, and 15.7 kDa exerted an antibacterial effect on Staphylococcus aureus. Chitosans with Mv 5, 15.7, and 27 kDa had no effect on Bifidobacterium bifidum ATCC 14893. The antibacterial effect of the 4-kDa chitosan on E. coli and B. bifidum 791 increased with DD in the range 55-85%.     

Preparation of 1,3,5-thiadiazine-2-thione derivatives of chitosan and their potential antioxidant activity in vitro

Three new kinds of 1,3,5-thiadiazine-2-thione derivatives of chitosan with two different molecular weight (SATTCS1, SATTCS2, TITTCS1, TITTCS2, CITTCS1 and CITTCS2) have been prepared. Their structures were characterized by IR spectroscopy. The substitution degree of derivatives calculated by elemental analyses was 0.47, 0.42, 0.41, 0.38, 0.41 and 0.36, respectively. The result shows that substitution degree of derivatives was higher with lower molecular weight. The antioxidant activity was studied using an established system, such as hydroxyl radical scavenging, superoxide radical scavenging and reducing power. Antioxidant activity of the 1,3,5-thiadiazine-2-thione derivatives of chitosan were stronger than that of chitosans and antioxidant activity of low molecular weight derivatives were stronger than that of high molecular weight derivatives. It is a potential antioxidant in vitro.     

Dependence of radioprotective activity of chitosan on its molecular mass

The influence of chitosan molecular mass (70, 10 and 5 kDa) on its radioprotective efficiency in mice experiments was studied. It was shown that chitosans with molecular masses of 70 and 10 kDa had similar radioprotective properties. The survival of mice increased up to 73% and 87% respectively at intravenous injection 15-30 min before a whole-body exposure to 137Cs gamma-radiation at a dose of 8 Gy (Cd97/30). Practically absolute loss of radioprotective activity occurred below a threshold of about 10 kDa. The results showed a high chitosan radioprotective activity in a wider range of molecular masses than it was supposed earlier.