The use of BrCN for assembling modified DNA duplexes and DNA-RNA hybrids; comparison with water-soluble carbodiimide.

Both cyanogen bromide (BrCN) and 1-ethyl-3-(3'-dimethylaminopropyl) carbodiimide may be used as coupling reagents for the template-directed assembly of DNA duplexes containing the sugar-phosphate backbone modification. Both reagents show similar ligation site structure-specific trend. Practical recommendations are given for selection of the condensing reagent depending on the properties of the duplex. Based on 31P NMR spectroscopy data, a scheme is suggested for BrCN activation of the nucleotide phosphomonoester group. Using both condensing reagents, we studied the condensation of oligonucleotides containing ribo-segments (from mononucleotide residue to full sequence) on the DNA template. Efficiency of the chemical ligation of RNA oligomers was shown to be much lower than that of DNA analogues. The coupling yield depends on the position of the RNA segment in the hybrid duplexes and on the position of the phosphate group in the nick.     

Site-directed modification of DNA duplexes by chemical ligation.

The efficiency of chemical ligation method have been demonstrated by assembling a number of DNA duplexes with modified sugar phosphate backbone. Condensation on a tetradecanucleotide template of hexa(penta)- and undecanucleotides differing only in the terminal nucleoside residue have been performed using water-soluble carbodiimide as a condensing agent. As was shown by comparing the efficiency of chemical ligation of single-strand breaks in those duplexes, the reaction rate rises 70 or 45 times if the 3'-OH group is substituted with an amino or phosphate group (the yield of products with a phosphoramidate or pyrophosphate bond is 96-100% in 6 d). Changes in the conformation of reacting groups caused by mismatched base pairs (A.A, A.C) as well as the hybrid rU.dA pair or an unpaired base make the template-directed condensation less effective. The thermal stability of DNA duplexes was assayed before and after the chemical ligation. Among all of the modified duplexes, only the duplex containing 3'-rU in the nick was found to be a substrate of T4 DNA ligase.     

Efficient synthesis of DNA dumbbells using template-induced chemical ligation in double-stranded polynucleotides closed by minihairpin fragments

The chemical ligation of 17 50-54-membered nicked DNA dumbbells with different closing fragments, nick positions, and nucleotides facing the nick were investigated. T4, T5, GTA4C, GCGA2GC, and GCGA3GC sequences were chosen as the closing fragments. The nicks were placed in the center of the duplex stem or were adjacent to the closing fragments. N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide and cyanogen bromide were used as the condensing agents. We showed that the ligation efficiency is 10%-90% depending on the sequence of the closing fragments, nick position, and nucleotides facing the nick. Coupling yields of 80%-90% were observed when the nick was situated in the middle of the molecule between two T residues or was adjacent to GCGA2GC or GCGA3GC minihairpins. In the last case, the reacting 3'-phosphate and 5'-hydroxy groups were brought close together by only two base pair minihairpins. The coupling yields did not depend on the nature of the condensing agent. On the basis of the results obtained, we believe a rational design of nicked DNA dumbbells has been developed for efficient chemical synthesis of closed dumbbells.     

Expression,purification and biochemical characterization of Methanocaldococcus jannaschii DNA ligase

We describe the biochemical characterization of Methanocaldococcus jannaschii (M. jannaschii) DNA ligase and its potential application in single nucleotide polymorphism (SNP) genotyping. The recombinant M. jannaschii DNA ligase is an ATP-dependent ligase. The ligase activity was dependent on metal ions of Mg²⁺ and Mn²⁺. The optimal concentrations of ATP cofactor and Mg²⁺ ion were 0.01–2 and 10 mM, respectively. The optimal pH value for DNA ligation was 8.5. High concentrations of NaCl inhibited DNA ligation. The effects of mismatches on joining short oligonucleotides by M. jannaschii DNA ligase were fully characterized. The mismatches at the first position 5′ to the nick inhibited ligation more than those at the first position 3′ to the nick. The mismatches at other positions 5′ to the nick (3rd to 7th sites) exhibited less inhibition on ligation. However, the introduction of a C/C mismatch at the third position 5′ to the nick could completely inhibit the ligation of the terminal-mismatched nick of an oligonucleotide duplex by M. jannaschii DNA ligase. Therefore, introducing an additional mismatch at the third position 5′ to the SNP site is a more effective approach in genotyping by M. jannaschii DNA ligase.     

Improving the fidelity of Thermus thermophilus DNA ligase.

The DNA ligase from Thermus thermophilus (Tth DNA ligase) seals single-strand breaks (nicks) in DNA duplex substrates. The specificity and thermostability of this enzyme are exploited in the ligase chain reaction (LCR) and ligase detection reaction (LDR) to distinguish single base mutations associated with genetic diseases. Herein, we describe a quantitative assay using fluorescently labeled substrates to study the fidelity of Tth DNA ligase. The enzyme exhibits significantly greater discrimination against all single base mismatches on the 3'-side of the nick in comparison with those on the 5'-side of the nick. Among all 12 possible single base pair mismatches on the 3'-side of the nick, only T-G and G-T mismatches generated a quantifiable level of ligation products after 23 h incubation. The high fidelity of Tth DNA ligase can be improved further by introducing a mismatched base or a universal nucleoside analog at the third position of the discriminating oligonucleotide. Finally, two mutant Tth DNA ligases, K294R and K294P, were found to have increased fidelity using this assay.     

Protein-DNA footprinting by endcapped duplex oligodeoxyribonucleotides

Oligodeoxyribonucleotides (5'-phosphorylated) of varying lengths were capped using a polyamide linker to form thermodynamically stable, endcapped DNA duplexes containing 8-14 bp. We have employed these endcapped DNA duplexes as tools to determine the DNA footprint of T4 DNA ligase. By high-performance liquid chromatography and PAGE analysis of the ligation mixtures of the endcapped DNA duplexes, we have found that by varying the lengths and the position of the nick, we can determine the minimal DNA-binding site as well as the mode of binding (symmetrical or asymmetrical binding) by the enzyme. The results of the study revealed that a 11 bp endcapped duplex was the shortest duplex effectively ligated. Dependence of ligation efficiency on nick position demonstrates that T4 DNA ligase bound asymmetrically to its DNA substrate. The use of a set of thermodynamically stable endcapped deoxyribonucleoside duplexes as a tool to elucidate the DNA footprint provides an efficient strategy for footprinting, which avoids ambiguities associated with chemical and biochemical footprinting methods.     

Role of nucleotidyl transferase motif V in strand joining by chlorella virus DNA ligase.

ATP-dependent DNA ligases, NAD(+)-dependent DNA ligases, and GTP-dependent RNA capping enzymes are members of a covalent nucleotidyl transferase superfamily defined by a common fold and a set of conserved peptide motifs. Here we examined the role of nucleotidyl transferase motif V ((184)LLKMKQFKDAEAT(196)) in the nick joining reaction of Chlorella virus DNA ligase, an exemplary ATP-dependent enzyme. We found that alanine substitutions at Lys(186), Lys(188), Asp(192), and Glu(194) reduced ligase specific activity by at least an order of magnitude, whereas substitutions at Lys(191) and Thr(196) were benign. The K186A, D192A, and E194A changes had no effect on the rate of single-turnover nick joining by preformed ligase-adenylate but affected subsequent rounds of nick joining at the ligase adenylation step. Conservative substitutions K186R, D192E, and E194D partially restored activity, whereas K186Q, D192N, and E194Q substitutions did not. Alanine mutation of Lys(188) elicited distinctive catalytic defects, whereby single-turnover nick joining by K188A-adenylate was slowed by an order of magnitude, and high levels of the DNA-adenylate intermediate accumulated. The rate of phosphodiester bond formation at a pre-adenylated nick (step 3 of the ligation pathway) was slowed by the K188A change. Replacement of Lys(188) by arginine reversed the step 3 arrest, whereas glutamine substitution was ineffective. Gel-shift analysis showed that the Lys(188) mutants bound stably to DNA-adenylate. We infer that Lys(188) is involved in the chemical step of phosphodiester bond formation.     

Application of a charge/size two-dimensional gel electrophoresis system to the analysis of the penicillin-binding proteins of Escherichia coli

Phenylalanine-specific tRNA from yeast was hydrolysed with cobra venom ribonuclease in the double-stranded regions and the fragments isolated. The 'dissected' molecules with nicks in positions 28 and 41 were reconstructed from supplementary fragments and treated with T-4 RNA ligase. A phosphodiester bond between two fragments was formed when the fragment combination (1-28) + (29-76) was used. A strong discrimination in the ligation yield between different nick positions in the same helix is shown.     

Rapid DNA chemical ligation for amplification of RNA and DNA signal

Enzymatic ligation methods are useful in the diagnostic detection of DNA sequences. Here, we describe the investigation of nonenzymatic phosphorothioate--iodoacetyl DNA chemical ligation as a method for the detection and identification of RNA and DNA. The specificity of ligation on the DNA target is shown to allow the discrimination of a single point mutation with a drop in the ligation yield of up to 16.1-fold. Although enzymatic ligation has very low activity for RNA targets, this reaction is very efficient for RNA targets. The speed of the chemical ligation with an RNA target achieves a 70% yield in 5 s, which is equal to or better than that of ligase-enzyme-mediated ligation with a DNA target. The reaction also exhibits a significant level of signal amplification under thermal cycling in periods as short as 100-120 min, with the RNA or DNA target acting in a catalytic way to ligate multiple pairs of probes.     

Purification of wheat germ RNA ligase. II. Mechanism of action of wheat germ RNA ligase

The mechanism of action of purified wheat germ RNA ligase has been examined. ATP was absolutely required for the ligation of substrates containing 5'-OH or 5'-P and 2',3'-cyclic P or 2'-P termini. Ligation of 1 mol of 5'-P-2',3'-cyclic P-terminated poly(A) was accompanied by the hydrolysis of 1 mol of ATP to 1 mol each of AMP and PPi. Purified RNA ligase catalyzed an ATP-PPi exchange reaction, specific for ATP and dATP, and formed a covalent enzyme-adenylate complex that was detected by autoradiography following incubation with [alpha-32P]ATP and separation of the products by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. A protein doublet with a molecular weight of approximately 110 kDa, the major product detected by silver staining, was labeled in these reactions. Isolated E-AMP complex was dissociated by the addition of ligatable poly(A), containing 5'-P-2',3'-cyclic P termini, to yield AMP and by the addition of PPi to yield ATP. The unique feature of the reactions leading to an exchange reaction between ATP and PPi and to the formation of an E-AMP complex was their marked stimulation (up to 400-fold) by the addition of RNA. This property distinguishes the wheat germ RNA ligase from other known RNA and DNA ligases which catalyze ATP-PPi exchange reactions and form E-AMP complexes in the absence of substrate. Thus, RNA appears to function in two capacities in the wheat germ system: as a cofactor, to stimulate the reaction of the enzyme with ATP, and as an authentic substrate for ligation.     

Protein–DNA footprinting by endcapped duplex oligodeoxyribonucleotides

Oligodeoxyribonucleotides (5′-phosphorylated) of varying lengths were capped using a polyamide linker to form thermodynamically stable, endcapped DNA duplexes containing 8–14 bp. We have employed these endcapped DNA duplexes as tools to determine the DNA footprint of T4 DNA ligase. By high-performance liquid chromatography and PAGE analysis of the ligation mixtures of the endcapped DNA duplexes, we have found that by varying the lengths and the position of the nick, we can determine the minimal DNA-binding site as well as the mode of binding (symmetrical or asymmetrical binding) by the enzyme. The results of the study revealed that a 11 bp endcapped duplex was the shortest duplex effectively ligated. Dependence of ligation efficiency on nick position demonstrates that T4 DNA ligase bound asymmetrically to its DNA substrate. The use of a set of thermodynamically stable endcapped deoxyribonucleoside duplexes as a tool to elucidate the DNA footprint provides an efficient strategy for footprinting, which avoids ambiguities associated with chemical and biochemical footprinting methods.     

Substrate recognition and fidelity of strand joining by an archaeal DNA ligase.

We have previously identified a DNA ligase (LigTk) from a hyperthermophilic archaeon, Thermococcus kodakaraensis KOD1. The enzyme is the only characterized ATP-dependent DNA ligase from a hyperthermophile, and allows the analysis of enzymatic DNA ligation reactions at temperatures above the melting point of the substrates. Here we have focused on the interactions of LigTk with various DNA substrates, and its specificities toward metal cations. LigTk could utilize Mg2+, Mn2+, Sr2+ and Ca2+ as a metal cation, but not Co2+, Zn2+, Ni2+, or Cu2+. The enzyme displayed typical Michaelis-Menten steady-state kinetics with an apparent Km of 1.4 microm for nicked DNA. The kcat value of the enzyme was 0.11*s-1. Using various 3' hydroxyl group donors (L-DNA) and 5' phosphate group donors (R-DNA), we could detect ligation products as short as 16 nucleotides, the products of 7 + 9 nucleotide or 8 + 8 nucleotide combinations at 40 degrees C. An elevation in temperature led to a decrease in reaction efficiency when short oligonucleotides were used, suggesting that the formation of a nicked, double-stranded DNA substrate preceded enzyme-substrate recognition. LigTk was not inhibited by the addition of excess duplex DNA, implying that the enzyme did not bind strongly to the double-stranded ligation product after nick-sealing. In terms of reaction fidelity, LigTk was found to ligate various substrates with mismatched base-pairing at the 5' end of the nick, but did not show activity towards the 3' mismatched substrates. LigTk could not seal substrates with a 1-nucleotide or 2-nucleotide gap. Small amounts of ligation products were detected with DNA substrates containing a single nucleotide insertion, relatively more with the 5' insertions. The results revealed the importance of proper base-pairing at the 3' hydroxyl side of the nick for the ligation reaction by LigTk.     

Effects of base mismatches on joining of short oligodeoxynucleotides by DNA ligases.

The requirement for Watson-Crick base pairing surrounding a nick in duplex DNA to be sealed by DNA ligase is the basis for oligonucleotide ligation assays that distinguish single base mutations in DNA targets. Experiments in a model system demonstrate that the minimum length of oligonucleotide that can be joined differs for different ligases. Thermus thermophilus (Tth) DNA ligase is unable to join any oligonucleotide of length six or less, while T4 DNA ligase and T7 DNA ligase are both able to join hexamers. The rate of oligonucleotide ligation by Tth DNA ligase increases between heptamer and nonamer. Mismatches which cause the duplex to be shortened by fraying, at the end distal to the join, slow the ligation reaction. In the case of Tth DNA ligase, mismatches at the seventh and eighth position 5'to the nick completely inhibit the ligation of octamers. The results are relevant to mechanisms of ligation.     

Structure and function of the hairpin ribozyme

The hairpin ribozyme belongs to the family of small catalytic RNAs that cleave RNA substrates in a reversible reaction that generates 2',3'-cyclic phosphate and 5'-hydroxyl termini. The hairpin catalytic motif was discovered in the negative strand of the tobacco ringspot virus satellite RNA, where hairpin ribozyme-mediated self-cleavage and ligation reactions participate in processing RNA replication intermediates. The self-cleaving hairpin, hammerhead, hepatitis delta and Neurospora VS RNAs each adopt unique structures and exploit distinct kinetic and catalytic mechanisms despite catalyzing the same chemical reactions. Mechanistic studies of hairpin ribozyme reactions provided early evidence that, like protein enzymes, RNA enzymes are able to exploit a variety of catalytic strategies. In contrast to the hammerhead and Tetrahymena ribozyme reactions, hairpin-mediated cleavage and ligation proceed through a catalytic mechanism that does not require direct coordination of metal cations to phosphate or water oxygens. The hairpin ribozyme is a better ligase than it is a nuclease while the hammerhead reaction favors cleavage over ligation of bound products by nearly 200-fold. Recent structure-function studies have begun to yield insights into the molecular bases of these unique features of the hairpin ribozyme.     

Functional dissection of the DNA interface of the nucleotidyltransferase domain of chlorella virus DNA ligase

Chlorella virus DNA ligase (ChVLig) has pluripotent biological activity and an intrinsic nick-sensing function. ChVLig consists of three structural modules that envelop nicked DNA as a C-shaped protein clamp: a nucleotidyltransferase (NTase) domain and an OB domain (these two are common to all DNA ligases) as well as a distinctive β-hairpin latch module. The NTase domain, which performs the chemical steps of ligation, binds the major groove flanking the nick and the minor groove on the 3'-OH side of the nick. Here we performed a structure-guided mutational analysis of the NTase domain, surveying the effects of 35 mutations in 19 residues on ChVLig activity in vivo and in vitro, including biochemical tests of the composite nick sealing reaction and of the three component steps of the ligation pathway (ligase adenylylation, DNA adenylylation, and phosphodiester synthesis). The results highlight (i) key contacts by Thr-84 and Lys-173 to the template DNA strand phosphates at the outer margins of the DNA ligase footprint; (ii) essential contacts of Ser-41, Arg-42, Met-83, and Phe-75 with the 3'-OH strand at the nick; (iii) Arg-176 phosphate contacts at the nick and with ATP during ligase adenylylation; (iv) the role of Phe-44 in forming the protein clamp around the nicked DNA substrate; and (v) the importance of adenine-binding residue Phe-98 in all three steps of ligation. Kinetic analysis of single-turnover nick sealing by ChVLig-AMP underscored the importance of Phe-75-mediated distortion of the nick 3'-OH nucleoside in the catalysis of DNA 5'-adenylylation (step 2) and phosphodiester synthesis (step 3). Induced fit of the nicked DNA into a distorted conformation when bound within the ligase clamp may account for the nick-sensing capacity of ChVLig.     

Generation of Long RNA Chains in Water

The synthesis of RNA chains from 3′,5′-cAMP and 3′,5′-cGMP was observed. The RNA chains formed in water, at moderate temperatures (40–90 °C), in the absence of enzymes or inorganic catalysts. As determined by RNase analyses, the bonds formed were canonical 3′,5′-phosphodiester bonds. The polymerizations are based on two reactions not previously described: 1) oligomerization of 3′, 5′-cGMP to ∼25-nucleotide-long RNA molecules, and of 3′,5′-cAMP to 4- to 8-nucleotide-long molecules. Oligonucleotide A molecules were further extended by reciprocal terminal ligation to yield RNA molecules up to >120 nucleotides long and 2) chain extension by terminal ligation of newly polymerized products of 3′,5′-cGMP on preformed oligonucleotides. The enzyme- and template-independent synthesis of long oligomers in water from prebiotically affordable precursors approaches the concept of spontaneous generation of (pre)genetic information.     

Kinetics and thermodynamics of nick sealing by T4 DNA ligase.

T4 DNA ligase is an Mg2+-dependent and ATP-dependent enzyme that seals DNA nicks in three steps: it covalently binds AMP, transadenylates the nick phosphate, and catalyses formation of the phosphodiester bond releasing AMP. In this kinetic study, we further detail the reaction mechanism, showing that the overall ligation reaction is a superimposition of two parallel processes: a 'processive' ligation, in which the enzyme transadenylates and seals the nick without dissociating from dsDNA, and a 'nonprocessive' ligation, in which the enzyme takes part in the abortive adenylation cycle (covalent binding of AMP, transadenylation of the nick, and dissociation). At low concentrations of ATP (<10 microM) and when the DNA nick is sealed with mismatching base pairs (e.g. five adjacent), this superimposition resolves into two kinetic phases, a burst ligation (approximately 0.2 min(-1)) and a subsequent slow ligation (approximately 2x10(-3) min(-1)). The relative rate and extent of each phase depend on the concentrations of ATP and Mg2+. The activation energies of self-adenylation (16.2 kcal.mol(-1)), transadenylation of the nick (0.9 kcal.mol(-1)), and nick-sealing (16.3-18.8 kcal.mol(-1)) were determined for several DNA substrates. The low activation energy of transadenylation implies that the transfer of AMP to the terminal DNA phosphate is a spontaneous reaction, and that the T4 DNA ligase-AMP complex is a high-energy intermediate. To summarize current findings in the DNA ligation field, we delineate a kinetic mechanism of T4 DNA ligase catalysis.     

The preparation of site-specifically modified riboswitch domains as an example for enzymatic ligation of chemically synthesized RNA fragments

This protocol describes an efficient method for the preparation of riboswitch domains comprising up to approximately 200 nt containing site-specific nucleoside modifications. The strategy is based on enzymatic ligation of chemically synthesized RNA fragments. The design of ligation sites strictly follows the criterion that all fragments comprise less than approximately 50 nt. This allows the researcher to rely on custom synthesis services and to utilize the large pool of commercially available, functionalized nucleoside phosphoramidites for solid-phase RNA synthesis. Importantly, this design renders utmost flexibility to position a chemical modification (e.g., a fluorescence label) within the RNA. Selection of the appropriate ligation type (using T4 RNA or T4 DNA ligase) is subordinate to the criteria above and is detailed in the protocol. The whole concept is demonstrated for 2-aminopurine containing thiamine pyrophosphate responsive riboswitch domains that are applied in fluorescence spectroscopic folding studies. Labeled samples in 5-35 nmol quantities are obtained within 3-4 d, not including the time for fragment synthesis.