Thermal stability of the [Fe(SCys)4] site in Clostridium pasteurianum rubredoxin: contributions of the local environment and Cys ligand protonation

Thermal denaturation of the mesophilic rubredoxin from Clostridium pasteurianum occurs through a number of temperature-dependent steps, the last and irreversible one being release of iron from the [Fe(2+)(SCys)(4)] site. We show here that thermally induced [Fe(2+)(SCys)(4)] site destruction is largely determined by the local environment, and not directly connected to thermostability of the native polypeptide fold of rubredoxin. Hydrophobic residues on the protein surface, V8 and L41, that shield the [Fe(SCys)(4)] site from solvent and form N-H(.)S hydrogen bonds to the metal-coordinating sulfurs, were mutated to residues with both uncharged and charged side chains. On these mutated rubredoxins the temperature dependence was measured for: (1) global unfolding of the protein by NMR, (2) loss of Fe(2+)at various ionic strengths and pH values, (3) the rates of non-denaturing displacement of Fe(2+) by Cd(2+) or Zn(2+). For reversible temperature-dependent changes in the global protein folding that occur prior to loss of iron, no thermostability differences were found among the wild-type, V8A, V8D, L41R, and L41D rubredoxins. However, for irreversible loss of iron from the [Fe(2+)(SCys)(4)] site, relative to the wild-type protein, L41R was more thermostable, V8A was somewhat less thermostable, and the acidic mutants L41D, V8D and [V8D, L41D] showed dramatically lowered thermostability. Lower pH facilitated - both kinetically and thermodynamically - thermally induced iron release, likely through protonation of ligand cysteines' thiols. For all of the rubredoxins a direct correlation was found between the midpoint temperature for thermally induced Fe(2+) loss and the rate of non-denaturing Fe(2+) displacement by Cd(2+) or Zn(2+) at room temperature. A mechanism is proposed involving transient movement of residue-8 and -41 side chains, allowing, and, in the case of negatively charged side chains, also facilitating, attack of a ligand cysteine by the incoming positively charged species (H(+), Cd(2+), or Zn(2+)). Thus, localized charge density and solvent accessibility modulate the stability of Fe(2+) ligation in rubredoxin. However, the reduced [Fe(SCys)(4)] site does not control the thermostability of the native polypeptide fold of rubredoxin.     

Selective metal binding to a membrane-embedded aspartate in the Escherichia coli metal transporter YiiP (FieF)

The cation diffusion facilitators (CDF) are a ubiquitous family of metal transporters that play important roles in homeostasis of a wide range of divalent metal cations. Molecular identities of substrate-binding sites and their metal selectivity in the CDF family are thus far unknown. By using isothermal titration calorimetry and stopped-flow spectrofluorometry, we directly examined metal binding to a highly conserved aspartate in the Escherichia coli CDF transporter YiiP (FieF). A D157A mutation abolished a Cd2+-binding site and impaired the corresponding Cd2+ transport. In contrast, substitution of Asp-157 with a cysteinyl coordination residue resulted in intact Cd2+ binding as well as full transport activity. A similar correlation was found for Zn2+ binding and transport, suggesting that Asp-157 is a metal coordination residue required for binding and transport of Cd2+ and Zn2+. The location of Asp-157 was mapped topologically to the hydrophobic core of transmembrane segment 5 (TM-5) where D157C was found partially accessible to thiol-specific labeling of maleimide polyethylene-oxide biotin. Binding of Zn2+ and Cd2+, but not Fe2+, Hg2+, Co2+, Ni2+, Mn2+, Ca2+, and Mg2+, protected D157C from maleimide polyethylene-oxide biotin labeling in a concentration-dependent manner. Furthermore, isothermal titration calorimetry analysis of YiiP(D157A) showed no detectable change in Fe2+ and Hg2+ calorimetric titrations, indicating that Asp-157 is not a coordination residue for Fe2+ and Hg2+ binding. Our results provided direct evidence for selective binding of Zn2+ and Cd2+ for to the highly conserved Asp-157 and defined its functional role in metal transport.     

Direct metal ion substitution at the [M(SCys)4]2– site of rubredoxin

 The single Fe(II) in reduced rubredoxin from Clostridium pasteurianum was found to be quantitatively displaced by either Cd²⁺ or Zn²⁺ when a modest molar excess of the substituting metal salt was anaerobically incubated with the reduced rubredoxin under mild conditions, namely, room temperature, pH 5.4–8.4, and no protein denaturants. Under the same conditions, cadmium-for-zinc substitution was also achieved upon aerobic incubation of the zinc-substituted rubredoxin with a modest molar excess of Cd²⁺. Displacements of Fe(II) from the reduced rubredoxin were not observed upon anaerobic incubation with Ni²⁺, Co²⁺, or VO²⁺ salts, and no reaction with any of the divalent metal ions was observed for the oxidized [Fe(III)] rubredoxin. Fe(II) could not be re-inserted into the Zn- or Cd-substituted rubredoxins without resorting to protein denaturation. ¹H and ¹¹³Cd NMR experiments showed that the cadmium-substituted rubredoxin prepared by the non-denaturing substitution method retained the pseudotetrahedral M(SCys)₄ coordination geometry and secondary structural elements characteristic of the native rubredoxin, and that "unzipping" of the β-sheet did not occur during metal substitution. Rates of Fe(II) displacement by M²⁺ (M=Cd or Zn) increased with increasing M²⁺/rubredoxin ratio, decreasing pH, and lower ionic strength. The substitution rates were faster for M=Cd than for M=Zn. Rates of Cd²⁺ substitution into a V8A-mutated rubredoxin were significantly faster than for the wild-type protein. The side-chain of V8 is on the protein surface and close to the metal-ligating Cys42Sγ at the M(SCys)₄ site. Therefore, the rate-limiting step in the substitution process is suggested to involve direct attack of the [M(SCys)₄]^2– site by the incoming M²⁺, without global unfolding of the protein. Implications of these results for metal ion incorporation into rubredoxins in vivo are discussed. Received: 29 May 1998 / Accepted: 11 August 1998     

1H Fourier transform NMR studies of insulin: coordination of Ca2+ to the Glu(B13) site drives hexamer assembly and induces a conformation change

1H Fourier transform NMR investigations of metal ion binding to insulin in 2H2O were undertaken as a function of pH* to determine the effects of metal ion coordination to the Glu(B13) site on the assembly and structure of the insulin hexamer. The C-2 histidyl regions of the 1H NMR spectra of insulin species containing respectively one Ca2+ and two Zn2+/hexamer and three Cd2+/hexamer have been assigned. Both the Cd2+ derivative (In)6(Cd2+)2Cd2+, where two of the Cd2+ ions are coordinated to the His(B10) sites and the remaining Cd2+ ion is coordinated to the Glu(B13) site [Sudmeier, J.L., Bell, S.J., Storm, M. C., & Dunn, M.F. (1981) Science (Washington, D.C.) 212, 560], and the Zn2+-Ca2+ derivative (In)6-(Zn2+)2Ca2+, where the two Zn2+ ions are coordinated to the His(B10) sites and Ca2+ ion is coordinated to the Glu(B13) site, give spectra in which the C-2 proton resonances of His(B10) are shifted upfield relative to metal-free insulin. Spectra of insulin solutions (3-20 mg/mL) containing a ratio of In:Zn2+ = 6:2 in the pH* region from 8.6 to 10 were found to contain signals both from metal-free insulin species and from the 2Zn-insulin hexamer, (In)6(Zn2+)2. The addition of either Ca2+ (in the ratio In:Zn2+:Ca2+ = 6:2:1) or 40 mM NaSCN was found to provide sufficient additional thermodynamic drive to bring about the nearly complete assembly of insulin hexamers. Cd2+ in the ratio In:Cd2+ = 6:3 also drives hexamer assembly to completion. We postulate that the additional thermodynamic drive provide by Ca2+ and CD2+ is due to coordination of these metal ions to the Glu(B13) carboxylates of the hexamer. At high pH*, this coordination neutralizes the repulsive Coulombic interactions between the six Glu(B13) carboxylates and forms metal ion "cross-links" across the dimer-dimer interfaces. Comparison of the aromatic regions of the 1H NMR spectra for (In)6(Zn2+)2 with (In)6(Zn2+)2Ca2+, (In)6(Cd2+)2Cd2+, and (In)6(Cd2+)2Ca2+ indicates that binding of either Ca2+ or Cd2+ to the Glu(B13) site induces a conformation change that perturbs the environments of the side chains of several of the aromatic residues in the insulin structure. Since these residues lie on the monomer-monomer and dimer-dimer subunit interfaces, we conclude that the conformation change includes small changes in the subunit interfaces that alter the microenvironments of the aromatic rings.     

Interaction of metal ions with lupin seed conglutin gamma

Various metal ions were capable of aggregating and precipitating conglutin gamma, an oligomeric glycoprotein purified from Lupinus albus seeds, at neutral pH values. The most effective metal ions, at 60-fold molar excess to the protein, were Zn2+, Hg2+ and Cu2+; a lower influence on the physical status of conglutin gamma was observed with Cr3+, Fe3+, Co2+, Ni2+, Cd2+, Sn2+, and Pb2+, while Mg2+, Ca2+ and Mn2+ had no effect at all. The insolubilisation of the protein with Zn2+, which is fully reversible, strictly depended on both metal concentration and pH. with middle points of the sharp transitions at three-fold molar excess and pH 6.5, respectively. Conglutin gamma is also fully retained on a metal affinity chromatography column at which Zn2+ and Ni2+ were complexed. A drop of pH below 6.0 and the use of chelating agents, such as EDTA and imidazole, fully desorbed the protein. A slightly lower binding to immobilised Cu2+ and Co2+ and no binding with Mg2+, Cd2+ and Mn2+ were observed. The role of the numerous histidine residues of conglutin gamma in the binding of Zn2+ is discussed.     

Differences in effect of Mn(II), Fe(III), Co(II), and Zn(II) ions on trypsinogen activation

The influence of Mn2+, Fe3+, Co2+, and Zn2+ ions on the extent of trypsinogen activation has been determined for several ion concentrations at pH 7.4 and 36.4 degrees C. For the Mn2+ ion also the autocatalytic rate constants have been detected. The effect of Ca2+ has been reinvestigated for comparison purposes. The apparent dissociation constants of KMn2+ = 0.01 (M) and KCa2+ = 0.02 (M) have been found for the given metal ion-trypsinogen complexes. For Co2+ ion, however, only a slight effect and for Fe3+ and Zn2+ ions no significant effect could be detected on trypsinogen activation. The investigated ions are of empty, open, and completed d subshells of electrons and they are different also in their ionic size. The differences in effects of the ions are discussed on the basis of these factors.     

Evaluation of the metal-ion-coordinating differences between the 2'-, 3'- and 5'-monophosphates of adenosine

The stability constants of the 1:1 complexes formed between Mg2+, Ca2+, Sr2+, Ba2+, Mn2+, Co2+, Ni2+, Cu2+, Zn2+ or Cd2+ and 2'AMP2-, 3'AMP2- or 5'AMP2- were determined by potentiometric pH titration in aqueous solution (I = 0.1 M, NaNO3; 25 degrees C). The experimental conditions were carefully selected such that self-association of the nucleotides and their complexes is negligibly small; i.e. it was made certain that the properties of the monomeric divalent-metal-ion--AMP [M(AMP)] complexes were studied. Based on recent measurements with simple phosphate monoesters, R-MP2- where R is a non-coordinating residue [Massoud, S. S. & Sigel, H. (1988) Inorg. Chem. 27, 1447-1453], it is shown that all the M(AMP) complexes of the alkaline earth ions, with the possible exception of Mg(5'AMP), have exactly the stability expected for a sole-phosphate coordination of the metal ion. The same property is revealed for the complexes with Mn2+, Co2+, Zn2+ or Cd2+ and 3'AMP2-; in case of Ni(3'AMP) and Cu(3'AMP) a slight stability increase just at the edge of the experimental-error limits is indicated. This slight stability increase is attributed to the formation of a macrochelate (possibly with N-3); in fact, additional information confirms macrochelation for Cu(3'AMP). About 45% of Cu(2'AMP) exists in aqueous solution as a macrochelate (probably involving N-3); the other M(2'AMP) complexes (M2+ = Mn2+, Co2+, Ni2+, Zn2+, Cd2+) form (if at all) only traces of a base-backbound species. Most pronounced is macrochelate formation with 5'AMP2-: all mentioned 3d ions and Zn2+ or Cd2+ form to some extent macrochelates via N-7 (the structures of these closed species are indicated). In case of M(5'AMP) the base-binding site is certain: replacement of N-7 by a CH unit (tubercidin 5'-monophosphate) eliminates any increased complex stability, whereas formation of the 1,N6-etheno bridge to form 1,N6-ethenoadenosine 5'-monophosphate results in the phenanthroline-like N-6,N-7 site which facilitates macrochelation significantly.     

Ferritin. Binding of beryllium and other divalent metal ions

Rat liver homogenates in 0.1 M Tris, pH 7.5, were heated to 80 degrees C, cooled immediately, and centrifuged at 24,000 X g, and 7Be2+ was added to the supernatant. Twenty-five per cent of the radioactivity was bound to a single protein. It was purified to homogeneity and identified to be ferritin as judged by different criteria. These were sucrose density gradient centrifugation, electrophoresis in polyacrylamide gel of the native or sodium dodecyl sulfate-treated protein, reactivity to antibodies, isoelectric focusing, and total amino acid composition. Comparative study of the ability of ferritin or apoferritin to bind Cd2+, Zn2+, Cu2+, and Be2+ was conducted by using a gel equilibrium technique, Centifree micropartition technique, and microcentrifuge desalting technique. Ferritin could be saturated with Cd2+ or Zn2+ or Cu2+ but not with Be2+ even after 800 g atoms of Be2+ were bound. None of the bound Be2+ was dialyzable at 4 degrees C in 0.05 Tris acetate buffer, pH 8.5, but at pH 6.5 over 80% of the bound metal ion was dialyzed after 72 h. By contrast, apoferritin bound similar amounts of all four metal ions, some of which were dialyzable. By spectrophotometric titrations at pH 6.5 of Be2+ with sulfosalicylic acid (SSA), BeKDSSA was calculated to be 5.0 X 10(-6) M and by competition of sulfosalicyclic acid and ferritin for Be2+ the BeKDferritin was calculated to be 6.8 X 10(-6) M.     

Contribution of the [Fe<Superscript>II</Superscript>(SCys)<Subscript>4</Subscript>] site to the thermostability of rubredoxins

The thermostabilities of Fe²⁺ ligation in rubredoxins (Rds) from the hyperthermophile Pyrococcus furiosus (Pf) and the mesophiles Clostridium pasteurianum (Cp) and Desulfovibrio vulgaris (Dv) were compared. Residue 44 forms an NH...S(Cys) hydrogen bond to one of the cysteine ligands to the [Fe(SCys)₄] site, and substitutions at this location affect the redox properties of the [Fe(SCys)₄] site. Both Pf Rd and Dv Rd have an alanine residue at position 44, whereas Cp Fd has a valine residue. Wild-type proteins were examined along with V44A and A44V exchange mutants of Cp and Pf Rds, respectively, in order to assess the effects of the residue at position 44 on the stability of the [Fe(SCys)₄] site. Stability of iron ligation was measured by temperature-ramp and fixed-temperature time course experiments, monitoring iron release in both the absence and presence of more thiophilic metals (Zn²⁺, Cd²⁺) and over a range of pH values. The thermostability of the polypeptide fold was concomitantly measured by fluorescence, circular dichroism, and ¹H NMR spectroscopies. The A44V mutation strongly lowered the stability of the [Fe^II(SCys)₄] site in Pf Rd, whereas the converse V44A mutation of Cp Rd significantly raised the stability of the [Fe^II(SCys)₄] site, but not to the levels measured for wild-type Dv Rd. The region around residue 44 is thus a significant contributor to stability of iron coordination in reduced Rds. This region, however, made only a minor contribution to the thermostability of the protein folding, which was found to be higher for hyperthermophilic versus mesophilic Rds, and largely independent of the residue at position 44. These results, together with our previous studies, show that localized charge density, solvent accessibility, and iron site/backbone interactions control the thermostability of the [Fe(SCys)₄] site. The iron site thermostability does make a minor contribution to the overall Rd thermostability. From a mechanistic standpoint, we also found that attack of displacing ions (H⁺, Cd²⁺) on the Cys42 sulfur ligand at the [Fe(SCys)₄] site occurs through the V8 side and not the V44 side of the iron site.Electronic Supplementary Material Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00775-004-0525-4Abbreviations BPS bathophenanthroline sulfonate, sodium salt - Cp Rd (Pf Rd, Dv Rd) recombinant rubredoxin from Clostridium pasteurianum (Pyrococcus furiosus, Desulfovibrio vulgaris) - HEPES hydroxyethylpiperazineethanesulfonic acid - MES morpholinoethanesulfonic acid - Tris tris(hydroxymethyl)aminomethane - wt wild-type - ZnRd recombinant rubredoxin containing a [Zn(SCys)₄] site     

Metal-binding affinity of the transmembrane site in ZntA: implications for metal selectivity

ZntA, a P1B-type ATPase, confers resistance specifically to Pb2+, Zn2+, and Cd2 in Escherichia coli. Inductively coupled plasma mass spectrometry measurements show that ZntA binds two metal ions with high affinity, one in the N-terminal domain and another in the transmembrane domain. Both sites can bind monovalent and divalent metal ions. Two proteins, deltaN-ZntA, in which the N-terminal domain is deleted, and C59A/C62A-ZntA, in which the N-terminal metal-binding site is disabled by site-specific mutagenesis, can only bind one metal ion. Because C59A/C62A-ZntA can bind a metal ion at the transmembrane site, the N-terminal domain does not block direct access of metal ions to it from the cytosol. A third mutant protein, C392A/C394A-ZntA, in which cysteines from the conserved CPC motif in transmembrane helix 6 are altered, binds metal ions only at the N-terminal site, indicating that both these cysteines form part of the transmembrane site. The metal affinity of the transmembrane site was determined in deltaN-ZntA and C59A/C62A-ZntA by competition titration using a metal ion indicator and by tryptophan fluorescence quenching. The binding affinity for the physiological substrates, Zn2+, Pb2+, and Cd2+, as well as for the extremely poor substrates, Cu2+, Ni2+, and Co2+, range from 10(6)-10(10) M(-1), and does not correlate with the metal selectivity shown by ZntA. Selectivity in ZntA possibly results from differences in metal-binding geometry that produce different structural responses. The affinity of the transmembrane site for metal ions is of similar magnitude to that of the N-terminal site [Liu J. et al. (2005) Biochemistry 44, 5159-5167]; thus, metal transfer between them would be facile.     

Wheat germ phosphoglycerate mutase: evidence for a metalloenzyme

Wheat germ phosphoglycerate mutase, exposed to 3.4 M guanidinium chloride at 22 degrees C and pH 7.8, slowly undergoes time-dependent inactivation which can be fully reversed by adding excess Co2+ or Mn2+ to a 50-fold dilution of the denaturing medium. Titration of the denatured enzyme with either Co2+ or Mn2+ shows that wheat germ mutase preferentially binds Co2+. Assuming 1:1 complexation between metal atom and protein, the apparent dissociation constants (Kd) for E Co2+ and E Mn2+ at 22 degrees C and pH 8.7 are approximately 1.06 and 1.84, respectively. Other metal atoms (e.g., Cr2+, Cu2+, Fe2+, Fe3+, Mg2+, and Ni2+) have no effect in restoring the apoenzyme's catalytic activity. At low concentrations (0.11-0.23 mM) Zn2+ partially restores activity, but promotes protein precipitation at elevated concentrations. Evidence suggests that all bisphosphoglycerate-independent phosphoglycerate mutases require either an intra- or an extramolecular metal atom in order to function. Attempts to characterize wheat germ mutase as a glycoprotein have yielded negative results.     

Insulin-metal ion interactions: the binding of divalent cations to insulin hexamers and tetramers and the assembly of insulin hexamers

An insulin hexamer containing one B10-bound Co(III) ion and one unoccupied B10 site has been synthesized. The properties of the monosubstituted hexamer show that occupancy of only one B10 site by Co3+ is sufficient to stabilize the hexameric form under the conditions of pH and concentration used in these studies. The experimentally determined, second-order rate constants for the binding of Zn2+ and Co2+ to the unoccupied B10 site are consistent with literature rate constants for the rate of association of these divalent metal ions with similar small molecule ligands. These findings indicate that the rate-limiting steps for Zn2+ and Co2+ binding involve the removal of the first aqua ligand. The rate constant for the binding of Cd2+ is significantly lower than the literature values for small molecule chelators, which suggests that some other protein-related process is rate-limiting for Cd2+ binding to the unoccupied, preformed B10 site. The kinetics of the assembly of insulin in the presence of limiting metal ion provides strong evidence indicating that the B13 site of the tetramer species can bind Zn2+, Cd2+, or Ca2+ prior to hexamer formation and that such binding assists hexamer formation. Both the tetramer and the hexamer B13 sites were found to exhibit similar affinities for Zn2+ and Cd2+ (Kd congruent to 9 microM), whereas the tetramer B13 sites bind Ca2+ much more weakly (Kd congruent to 1 mM for tetramer vs 83 microM for hexamer). The second-order rate constants estimated for the association of Zn2+ and Cd2+ to the tetrameric site indicate that the loss of the first inner-sphere aqua ligand is the rate-limiting step for binding.     

Isolation and characterization of NADP+-linked isocitrate dehydrogenase of germinating pea seeds (Pisum sativum)

NADP+-linked isocitrate dehydrogenase (E.C.1.1.1.42) has been purified to homogeneity from germinating pea seeds. The enzyme is a tetrameric protein (mol wt, about 146,000) made up of apparently identical monomers (subunit mol wt, about 36,000). Thermal inactivation of purified enzyme at 45 degrees and 50 degrees C shows simple first order kinetics. The enzyme shows optimum activity at pH range 7.5-8. Effect of substrate [S] on enzyme activity at different pH (6.5-8) suggests that the proton behaves formally as an "uncompetitive inhibitor". A basic group of the enzyme (site) is protonated in this pH range in the presence of substrate only, with a pKa equal to 6.78. On successive dialysis against EDTA and phosphate buffer, pH 7.8 at 0 degrees C, yields an enzymatically inactive protein showing kinetics of thermal inactivation identical to the untreated (native) enzyme. Maximum enzyme activity is observed in presence of Mn2+ and Mg2+ ions (3.75 mM). Addition of Zn2+, Cd2+, Co2+ and Ca2+ ions brings about partial recovery. Other metal ions Fe2+, Cu2+ and Ni2+ are ineffective.     

Differences in the protein fluorecence of the two iron(III)-binding sites of ovotransferrin.

1. Changes in the tryptophan fluorescence and the visible absorption spectrum resulting from the combination of apo-ovotransferrin with Fe3+, F,E2+, Cu2+, Zn2+, Mn2+, and Cd2+were measured. 2. As expected for a radiationless transfer of electronic excitation energy, only the ions Fe3+, Fe2+and Cu2+, which gave complexes with large extinctions between 300 and 370nm, resulted in large decreases in trytophan fluorescence. 3. The decrease in protein fluorescence was non-linear with increasing occupancy of the Fe3+ -and Cu2+ - binding sites. The decrease in fluorescence on binding of Fe3+ was biphasic and showed that the two metal-binding sites were being occupied sequentially at pH7.4-8.4. The first site reacted with Fe3+ instantaneously, the second was occupied over a minute. 5. The nonidentity of the two sites was also demonstrated by the preparation of a stable hybrid containing both Cu2+ and Zn2+.h Cu2+ and Zn2+     

Iron-depleted reaction centers from Rhodopseudomonas sphaeroides R-26.1: characterization and reconstitution with Fe2+, Mn2+, Co2+, Ni2+, Cu2+, and Zn2+

Reaction centers (RCs) from the photosynthetic bacterium Rhodopseudomonas sphaeroides R-26.1 were depleted of Fe by a simple procedure involving reversible dissociation of the H subunit. The resulting intact Fe-depleted RCs contained 0.1-0.2 Fe per RC as determined from atomic absorption and electron paramagnetic resonance (EPR) spectroscopy. Fe-depleted RCs that have no metal ion occupying the Fe site differed from native RCs in the following respects: (1) the rate of electron transfer from QA- to QB exhibited nonexponential kinetics with the majority of RCs having a rate constant slower by only a factor of approximately 2, (2) the efficiency of light-induced charge separation (DQA----D+QA-) produced by a saturating flash decreased to 63%, and (3) QA appeared readily reducible to QA2-. Various divalent metal ions were subsequently incorporated into the Fe site. The electron transfer characteristics of Fe-depleted RCs reconstituted with Fe2+, Mn2+, Co2+, Ni2+, Cu2+, and Zn2+ were essentially the same as those of native RCs. These results demonstrate that neither Fe2+ nor any divalent metal ion is required for rapid electron transfer from QA- to QB. However, the presence of a metal ion in the Fe site is necessary to establish the characteristic, native, electron-transfer properties of QA. The lack of a dominant role of Fe2+ or other divalent metals in the observed rate of electron transfer from QA- to QB suggests that a rate-limiting step (for example, a protonation event or a light-induced structural change) precedes electron transfer.     

Characterization of certain proteinase isoenzymes produced by benign and virulent strains of Bacteroides nodosus

Three proteinase isoenzymes from one benign strain of Bacteroides nodosus and five proteinase isoenzymes from each of two virulent strains of B. nodosus were purified by horizontal slab polyacrylamide gel electrophoresis. The purified isoenzymes hydrolysed casein, collagen I, collagen III, elastin, alpha-elastin, fibrinogen, gelatin, haemoglobin and alpha-keratin. The pH optima of all the isoenzymes lay between 7.25 and 9.5, the range of 8.75-9.25 being common to all. The isoenzymes were inhibited by phenylmethylsulphonyl fluoride, diphenylcarbamyl chloride, L-(1-tosylamide-2-phenyl)ethyl chloromethyl ketone, EGTA and EDTA, indicating that they were chymotrypsin-like serine proteinases that require a metal ion for stability or activity. EDTA inhibition was not reversed by addition of Ca2+ or Mg2+. Some isoenzymes were activated by Mg2+, Ca2+, Cr3+ and Se4+ and all were inhibited by Fe2+, Co2+, Cu2+, Zn2+, Cd2+ and Hg2+. Isoenzymes from benign strains had a lower temperature stability, losing all activity at 55 degrees C, whereas those from virulent strains lost all activity at 60 degrees C.     

The functional role of zinc in angiotensin converting enzyme: implications for the enzyme mechanism

Zinc is essential to the catalytic activity of angiotensin converting enzyme. The enzyme contains one g-atom of zinc per mole of protein. Chelating agents abolish activity by removing the metal ion to yield the inactive, metal-free apoenzyme. Zinc does not stabilize protein structure since the native and apoenzymes are equally susceptible to heat denaturation. Addition of either Zn2+, Co2+, or Mn2+ to the apoenzyme generates an active metalloenzyme; Fe2+, Ni2+, Cu2+, Cd2+, and Hg2+ fail to restore activity. The activities of the metalloenzymes follow the order Zn greater than Co greater than Mn. The protein binds Zn2+ more firmly than it does Co2+ or Mn2+. Hydrolysis of the chromophoric substrate, furanacryloyl-Phe-Gly-Gly, by the active metalloenzymes is subject to chloride activation; the activation constant is not metal dependent. Metal replacement mainly affects Kcat with very little change in Km, indicating that the role of zinc is to catalyze peptide hydrolysis.     

Conservative and nonconservative mutations of the transmembrane CPC motif in ZntA: effect on metal selectivity and activity

ZntA from Escherichia coli belongs to the P1B-ATPase transporter family and mediates resistance to toxic levels of selected divalent metal ions. P1B-type ATPases can be divided into subgroups based on substrate cation selectivity. ZntA has the highest selectivity for Pb2+, followed by Zn2+ and Cd2+; it also shows low levels of activity with Cu2+, Ni2+, and Co2+. It has two high-affinity metal-binding sites, one each in the N-terminus and the transmembrane domains. Ligands to the transmembrane metal site in ZntA include the cysteine residues of the conserved 392CPC394 motif in the sixth transmembrane helix. Pro393 is invariant in all P-type ATPases. For ZntA homologues with different metal ion selectivity, the cysteines are replaced by serine, histidine, and threonine. To test the effect on activity and metal ion selectivity, single alanine, histidine, and serine substitutions at Cys392 or Cys394 in ZntA were characterized, as well as double substitutions of both cysteines by histidine or serine. P393A was also characterized. C392A, C394A, and P393A lost the ability to bind a metal ion with high affinity in the transmembrane domain. Histidine and serine substitutions at Cys392 and Cys394 resulted in loss of binding of Pb2+ at the transmembrane site, indicating that both cysteines of the CPC motif are required for binding Pb2+ with high affinity in ZntA homologues. However, C392H, C392S, C394H, C394S, C392S/C394S, and C392H/C394H could bind other divalent metal ions at the transmembrane site and retained low but measurable activity. Interestingly, these mutants lost the predominant selectivity for Zn2+ and Cd2+ shown by wtZntA. Therefore, conserved residues contribute to metal selectivity by supplying ligands that bind metal ions not only with high affinity, as for Pb2+, but also with the most favorable binding geometry that results in efficient catalysis.     

Functional characterization of the dimerization domain of the ferric uptake regulator (Fur) of Pseudomonas aeruginosa

The functional properties of the recombinant C-terminal dimerization domain of the Pseudomonas aeruginosa Fur (ferric uptake regulator) protein expressed in and purified from Escherichia coli have been evaluated. Sedimentation velocity measurements demonstrate that this domain is dimeric, and the UV CD spectrum is consistent with a secondary structure similar to that observed for the corresponding region of the crystallographically characterized wild-type protein. The thermal stability of the domain as determined by CD spectroscopy decreases significantly as pH is increased and increases significantly as metal ions are added. Potentiometric titrations (pH 6.5) establish that the domain possesses a high-affinity and a low-affinity binding site for metal ions. The high-affinity (sensory) binding site demonstrates association constants (K(A)) of 10(+/-7)x10(6), 5.7(+/-3)x10(6), 2.0(+/-2)x10(6) and 2.0(+/-3)x10(4) M(-1) for Ni2+, Zn2+, Co2+ and Mn2+ respectively, while the low-affinity (structural) site exhibits association constants of 1.3(+/-2)x10(6), 3.2(+/-2)x10(4), 1.76(+/-1)x10(5) and 1.5(+/-2)x10(3) M(-1) respectively for the same metal ions (pH 6.5, 300 mM NaCl, 25 degrees C). The stability of metal ion binding to the sensory site follows the Irving-Williams order, while metal ion binding to the partial sensory site present in the domain does not. Fluorescence experiments indicate that the quenching resulting from binding of Co2+ is reversed by subsequent titration with Zn2+. We conclude that the domain is a reasonable model for many properties of the full-length protein and is amenable to some analyses that the limited solubility of the full-length protein prevents.