Interaction of formin FH2 with skeletal muscle actin. EPR and DSC studies

Formins are highly conserved proteins that are essential in the formation and regulation of the actin cytoskeleton. The formin homology 2 (FH2) domain is responsible for actin binding and acts as an important nucleating factor in eukaryotic cells. In this work EPR and DSC were used to investigate the properties of the mDia1-FH2 formin fragment and its interaction with actin. MDia1-FH2 was labeled with a maleimide spin probe (MSL). EPR results suggested that the MSL was attached to a single SH group in the FH2. In DSC and temperature-dependent EPR experiments we observed that mDia1-FH2 has a flexible structure and observed a major temperature-induced conformational change at 41 °C. The results also confirmed the previous observation obtained by fluorescence methods that formin binding can destabilize the structure of actin filaments. In the EPR experiments the intermolecular connection between the monomers of formin dimers proved to be flexible. Considering the complex molecular mechanisms underlying the cellular roles of formins this internal flexibility of the dimers is probably important for manifestation of their biological functions.     

Differential interactions of the formins INF2, mDia1, and mDia2 with microtubules

A number of cellular processes use both microtubules and actin filaments, but the molecular machinery linking these two cytoskeletal elements remains to be elucidated in detail. Formins are actin-binding proteins that have multiple effects on actin dynamics, and one formin, mDia2, has been shown to bind and stabilize microtubules through its formin homology 2 (FH2) domain. Here we show that three formins, INF2, mDia1, and mDia2, display important differences in their interactions with microtubules and actin. Constructs containing FH1, FH2, and C-terminal domains of all three formins bind microtubules with high affinity (K(d) < 100 nM). However, only mDia2 binds microtubules at 1:1 stoichiometry, with INF2 and mDia1 showing saturating binding at approximately 1:3 (formin dimer:tubulin dimer). INF2-FH1FH2C is a potent microtubule-bundling protein, an effect that results in a large reduction in catastrophe rate. In contrast, neither mDia1 nor mDia2 is a potent microtubule bundler. The C-termini of mDia2 and INF2 have different functions in microtubule interaction, with mDia2's C-terminus required for high-affinity binding and INF2's C-terminus required for bundling. mDia2's C-terminus directly binds microtubules with submicromolar affinity. These formins also differ in their abilities to bind actin and microtubules simultaneously. Microtubules strongly inhibit actin polymerization by mDia2, whereas they moderately inhibit mDia1 and have no effect on INF2. Conversely, actin monomers inhibit microtubule binding/bundling by INF2 but do not affect mDia1 or mDia2. These differences in interactions with microtubules and actin suggest differential function in cellular processes requiring both cytoskeletal elements.     

The Uncoupling of the Effects of Formins on the Local and Global Dynamics of Actin Filaments

In this study, experiments were carried out in the conventional and saturation-transfer electron paramagnetic resonance (EPR) time domains to explore the effect of mDia1-FH2 formin fragments on the dynamic and conformational properties of actin filaments. Conventional EPR measurements showed that addition of formin to actin filaments produced local conformational changes in the vicinity of Cys-374 by increasing the flexibility of the protein matrix in the environment of the label. The results indicated that it was the binding of formin to the barbed end that resulted in these conformational changes. The conventional EPR results obtained with actin labeled on the Lys-61 site showed that the binding of formins could only slightly affect the structure of the subdomain 2 of actin, reflecting the heterogeneity of the formin-induced conformational changes. Saturation transfer EPR measurements revealed that the binding of formins decreased the torsional flexibility of the actin filaments in the microsecond time range. We concluded that changes in the local and the global conformational fluctuations of the actin filaments are associated with the binding of formins to actin. The results on the two EPR time domains showed that the effects of formins on the substantially different types of motions were uncoupled.     

Biochemical characterization of the Rho GTPase-regulated actin assembly by diaphanous-related formins, mDia1 and Daam1, in platelets

The diaphanous-related formins are actin nucleating and elongating factors. They are kept in an inactive state by an intramolecular interaction between the diaphanous inhibitory domain (DID) and the diaphanous-autoregulatory domain (DAD). It is considered that the dissociation of this autoinhibitory interaction upon binding of GTP-bound Rho to the GTPase binding domain next to DID induces exposure of the FH1-FH2 domains, which assemble actin filaments. Here, we isolated two diaphanous-related formins, mDia1 and Daam1, in platelet extracts by GTP-RhoA affinity column chromatography. We characterized them by a novel assay, where beads coated with the FH1-FH2-DAD domains of either mDia1 or Daam1 were incubated with platelet cytosol, and the assembled actin filaments were observed after staining with rhodamine-phalloidin. Both formins generated fluorescent filamentous structures on the beads. Quantification of the fluorescence intensity of the beads revealed that the initial velocity in the presence of mDia1 was more than 10 times faster than in the presence of Daam1. The actin assembly activities of both FH1-FH2-DADs were inhibited by adding cognate DID domains. GTP-RhoA, -RhoB, and -RhoC, but not GTP-Rac1 or -Cdc42, bound to both mDia1 and Daam1 and efficiently neutralized the inhibition by the DID domains. The association between RhoA and Daam1 was induced by thrombin stimulation in platelets, and RhoA-bound endogenous formins induced actin assembly, which was inhibited by the DID domains of Daam1 and mDia1. Thus, mDia1 and Daam1 are platelet actin assembly factors having distinct efficiencies, and they are directly regulated by Rho GTPases.     

Tropomyosin regulates elongation by formin at the fast-growing end of the actin filament

The balance between dynamic and stable actin filaments is essential for the regulation of cellular functions including the determination of cell shape and polarity, cell migration, and cytokinesis. Proteins that regulate polymerization at the filament ends and filament stability confer specificity to actin filament structure and cellular function. The dynamics of the barbed, fast-growing end of the filament are controlled in space and time by both positive and negative regulators of actin polymerization. Capping proteins inhibit the addition and loss of subunits, whereas other proteins, including formins, bind at the barbed end and allow filament growth. In this work, we show that tropomyosin regulates dynamics at the barbed end. Tropomyosin binds to constructs of FRL1 and mDia2 that contain the FH2 domain and modulates formin-dependent capping of the barbed end by relieving inhibition of elongation by FRL1-FH1FH2, mDia1-FH2, and mDia2-FH2 in an isoform-dependent fashion. In this role, tropomyosin functions as an activator of formin. Tropomyosin also inhibits the binding of FRL1-FH1FH2 to the sides of actin filaments independent of the isoform. In contrast, tropomyosin does not affect the ability of capping protein to block the barbed end. We suggest that tropomyosin and formin act together to ensure the formation of unbranched actin filaments, protected from severing, that could be capped in stable cellular structures. This role, in addition to its cooperative control of myosin function, establishes tropomyosin as a universal regulator of the multifaceted actin cytoskeleton.     

Actin Filament Bundling and Different Nucleating Effects of Mouse Diaphanous-Related Formin FH2 Domains on Actin/ADF and Actin/Cofilin Complexes

Mouse Diaphanous-related formins (mDias) are members of the formin protein family that nucleate actin polymerization and subsequently promote filamentous actin (F-actin) elongation by monomer addition to fast-growing barbed ends. It has been suggested that mDias preferentially recruit actin complexed to profilin due to their proline-rich FH1 domains. During filament elongation, dimeric mDias remain attached to the barbed ends by their FH2 domains, which form an anti-parallel ring-like structure enclosing the filament barbed ends. Dimer formation of mDia-FH2 domains is dependent on their N-terminal lasso and linker subdomains (connector). Here, we investigated the effect of isolated FH2 domains on actin polymerization using mDia1-FH2 domain plus connector, as well as core mDia1, mDia2, and mDia3 missing the connector, by cosedimentation and electron microscopy after negative staining. Analytical ultracentrifugation showed that core FH2 domains of mDia1 and mDia2 exhibited a low degree of dimer formation, whereas mDia3-FH2 minus connector and mDia1-FH2 plus connector readily dimerized. Only core mDia3-FH2 was able to nucleate actin polymerization. However, all tested core FH2 domains decorated and bundled F-actin, as demonstrated by electron microscopy after negative staining. Bundling activity was highest for mDia3-FH2, decreased for mDia2-FH2, and further decreased for mDia1-FH2. The mDia1-FH2 domain plus connector induced actin polymerization also in the absence of profilin, but failed to induce F-actin deformation and bundling. We also tested whether mDia1-FH2 was able to repolymerize actin in complex with different proteins that stabilize globular actin. The data obtained demonstrated that mDia1-FH2 induced actin repolymerization only from the actin/cofilin-1 complex, but not when complexed to actin depolymerizing factor, gelsolin segment 1, vitamin D binding protein, or deoxyribonuclease I.     

The human formin FHOD1 contains a bipartite structure of FH3 and GTPase-binding domains required for activation

Formins induce the nucleation and polymerization of unbranched actin filaments. They share three homology domains required for profilin binding, actin polymerization, and regulation. Diaphanous-related formins (DRFs) are activated by GTPases of the Rho/Rac family, whose interaction with the N-terminal formin domain is thought to displace a C-terminal Diaphanous-autoregulatory domain (DAD). We have determined the structure of the N-terminal domains of FHOD1 consisting of a GTPase-binding domain (GBD) and the DAD-recognition domain FH3. In contrast to the formin mDia1, the FHOD1-GBD reveals a ubiquitin superfold as found similarly in c-Raf1 or PI3 kinase. This GBD is recruited by Rac and Ras GTPases in cells and plays an essential role for FHOD1-mediated actin remodeling. The FHOD1-FH3 domain is composed of five armadillo repeats, similarly to other formins. Mutation of one residue in the predicted DAD-interaction surface efficiently activates FHOD1 in cells. These results demonstrate that DRFs have evolved different molecular solutions to govern their autoregulation and GTPase specificity.     

A cooperative jack model of random coil-to-elongation transition of the FH1 domain by profilin binding explains formin motor behavior in actin polymerization

Filopodia are essential for the development of neuronal growth cones, cell polarity and cell migration. Their protrusions are powered by the polymerization of actin filaments linked to the plasma membrane, catalyzed by formin proteins. The acceleration of polymerization depends on the number of profilin–actins binding with the formin-FH1 domain. Biophysical characterization of the disordered formin-FH1 domain remains a challenge. We analyzed the conformational distribution of the diaphanous-related formin mDia1-FH1 bound with one to six profilins. We found a coil-to-elongation transition in the FH1 domain. We propose a cooperative “jack” model for the Formin-Homology-1 (FH1) domain of formins stacked by profilin–actins.     

Control of the assembly of ATP- and ADP-actin by formins and profilin

Formin proteins nucleate actin filaments, remaining processively associated with the fast-growing barbed ends. Although formins possess common features, the diversity of functions and biochemical activities raised the possibility that formins differ in fundamental ways. Further, a recent study suggested that profilin and ATP hydrolysis are both required for processive elongation mediated by the formin mDia1. We used total internal reflection fluorescence microscopy to observe directly individual actin filament polymerization in the presence of two mammalian formins (mDia1 and mDia2) and two yeast formins (Bni1p and Cdc12p). We show that these diverse formins have the same basic properties: movement is processive in the absence or presence of profilin; profilin accelerates elongation; and actin ATP hydrolysis is not required for processivity. These results suggest that diverse formins are mechanistically similar, but the rates of particular assembly steps vary.     

The mouse Formin mDia1 is a potent actin nucleation factor regulated by autoinhibition

Formin proteins are widely expressed in eukaryotes and play essential roles in assembling specific cellular actin-based structures. Formins are defined by a Formin Homology 2 (FH2) domain, as well as a proline-rich FH1 domain that binds the actin monomer binding protein, profilin, and other ligands. Constructs including FH2 of budding yeast Bni1 or fission yeast Cdc12 formins nucleate actin filaments in vitro. In this study, we demonstrate that FH2-containing constructs of murine mDia1 (also called p140 mDia or Drf1) are much more potent actin nucleators than the yeast formins. FH1 is necessary for nucleation when actin monomers are profilin bound. mDia1 is a member of the Diaphanous formin subfamily (Dia), whose members contain an N-terminal Rho GTPase binding domain (GBD) and a C-terminal Diaphanous autoinhibitory domain (DAD, ). Based on cellular and in vitro binding studies, an autoinhibitory model for Dia formin regulation proposes that GBD binding to DAD inhibits Dia-induced actin remodeling, whereas Rho binding activates by releasing GBD from DAD. Supporting this model, our results show that an N-terminal mDia1 construct strongly inhibits actin nucleation by the C terminus. RhoA partially relieves inhibition but does so when bound to either GDP or GTP analogs. Both N- and C-terminal mDia1 constructs appear to be multimeric.     

The Role of Formin Tails in Actin Nucleation,Processive Elongation,and Filament Bundling

Formins are multidomain proteins that assemble actin in a wide variety of biological processes. They both nucleate and remain processively associated with growing filaments, in some cases accelerating filament growth. The well conserved formin homology 1 and 2 domains were originally thought to be solely responsible for these activities. Recently a role in nucleation was identified for the Diaphanous autoinhibitory domain (DAD), which is C-terminal to the formin homology 2 domain. The C-terminal tail of the Drosophila formin Cappuccino (Capu) is conserved among FMN formins but distinct from other formins. It does not have a DAD domain. Nevertheless, we find that Capu-tail plays a role in filament nucleation similar to that described for mDia1 and other formins. Building on this, replacement of Capu-tail with DADs from other formins tunes nucleation activity. Capu-tail has low-affinity interactions with both actin monomers and filaments. Removal of the tail reduces actin filament binding and bundling. Furthermore, when the tail is removed, we find that processivity is compromised. Despite decreased processivity, the elongation rate of filaments is unchanged. Again, replacement of Capu-tail with DADs from other formins tunes the processive association with the barbed end, indicating that this is a general role for formin tails. Our data show a role for the Capu-tail domain in assembling the actin cytoskeleton, largely mediated by electrostatic interactions. Because of its multifunctionality, the formin tail is a candidate for regulation by other proteins during cytoskeletal rearrangements.     

Mechanisms of plasma membrane targeting of formin mDia2 through its amino terminal domains

The formin mDia2 mediates the formation of lamellipodia and filopodia during cell locomotion. The subcellular localization of activated mDia2 depends on interactions with actin filaments and the plasma membrane. We investigated the poorly understood mechanism of plasma membrane targeting of mDia2 and found that the entire N-terminal region of mDia2 preceding the actin-polymerizing formin homology domains 1 and 2 (FH1-FH2) module was potently targeted to the membrane. This localization was enhanced by Rif, but not by other tested small GTPases, and depended on a positively charged N-terminal basic domain (BD). The BD bound acidic phospholipids in vitro, suggesting that in vivo it may associate with the plasma membrane through electrostatic interactions. Unexpectedly, a fragment consisting of the GTPase-binding region and the diaphanous inhibitory domain (G-DID), thought to mediate the interaction with GTPases, was not targeted to the plasma membrane even in the presence of constitutively active Rif. Addition of the BD or dimerization/coiled coil domains to G-DID rescued plasma membrane targeting in cells. Direct binding of Rif to mDia2 N terminus required the presence of both G and DID. These results suggest that the entire N terminus of mDia2 serves as a coincidence detection module, directing mDia2 to the plasma membrane through interactions with phospholipids and activated Rif.     

Toxoplasma gondii profilin acts primarily to sequester G-actin while formins efficiently nucleate actin filament formation in vitro

Apicomplexan parasites employ gliding motility that depends on the polymerization of parasite actin filaments for host cell entry. Despite this requirement, parasite actin remains almost entirely unpolymerized at steady state; formation of filaments required for motility relies on a small repertoire of actin-binding proteins. Previous studies have shown that apicomplexan formins and profilin exhibit canonical functions on heterologous actins from higher eukaryotes; however, their biochemical properties on parasite actins are unknown. We therefore analyzed the impact of T. gondii profilin (TgPRF) and FH1-FH2 domains of two formin isoforms in T. gondii (TgFRM1 and TgFRM2) on the polymerization of T. gondii actin (TgACTI). Our findings based on in vitro assays demonstrate that TgFRM1-FH1-FH2 and TgFRM2-FH1-FH2 dramatically enhanced TgACTI polymerization in the absence of profilin, making them the sole protein factors known to initiate polymerization of this normally unstable actin. In addition, T. gondii formin domains were shown to both initiate polymerization and induce bundling of TgACTI filaments; however, they did not rely on TgPRF for these activities. In contrast, TgPRF sequestered TgACTI monomers, thus inhibiting polymerization even in the presence of formins. Collectively, these findings provide insight into the unusual control mechanisms of actin dynamics within the parasite.     

The filamentous actin cross-linking/bundling activity of mammalian formins

Formins are multidomain proteins that regulate actin filament dynamics and are defined by the formin homology 2 domain. Biochemical assays suggest that mammalian formins display actin-filament nucleation, severing, and bundling activities. Whether formins can cross-link actin filaments into viscoelastic arrays and the effectiveness of formins' bundling activity compared with that of important filamentous actin (F-actin) cross-linking/bundling proteins are unknown. Here, we used rigorous in vitro rheologic assays to deconvolve the dynamic cross-linking activity from the bundling activity of formin FRL1 and the closely related mDia1 and mDia2. In addition, we compared these formins with the canonical F-actin bundling protein fascin and cross-linking/bundling proteins alpha-actinin and filamin. We found that FRL1 and mDia2, but not mDia1, can help F-actin form highly elastic networks. FRL1 and mDia2 mediate the formation of highly elastic F-actin networks as effectively and rapidly as alpha-actinin and filamin but only past a relatively high actin-to-formin molar ratio of 50:1. Past that threshold molar ratio, the mechanical properties of F-actin/formin networks are independent of formin concentration, similar to fascin. Moreover, unlike those for alpha-actinin and filamin but similar to those for fascin, F-actin/formin networks show no strain-induced hardening. mDia1 cannot bundle F-actin but can weakly cross-link filaments at high concentrations. Point mutagenesis reveals that reducing the barbed-end binding activity of FRL1 and mDia2 greatly enhances the rate of formation of F-actin gels but does not significantly affect the mechanical properties of the resulting networks at steady state. Together, these results suggest that the mechanical behaviors of FRL1 and mDia2 are fundamentally different from those of cross-linking/bundling proteins alpha-actinin and filamin but qualitatively similar to the mechanical behavior of the bundling protein fascin, albeit with a dramatically increased (>10-fold) threshold concentration for transition to bundling, which nevertheless leads to much stiffer F-actin networks than fascin.     

Formin Cdc12’s specific actin assembly properties are tailored for cytokinesis in fission yeast

Formins generate unbranched actin filaments by a conserved, processive actin assembly mechanism. Most organisms express multiple formin isoforms that mediate distinct cellular processes and facilitate actin filament polymerization by significantly different rates, but how these actin assembly differences correlate to cellular activity is unclear. We used a computational model of fission yeast cytokinetic ring assembly to test the hypothesis that particular actin assembly properties help tailor formins for specific cellular roles. Simulations run in different actin filament nucleation and elongation conditions revealed that variations in formin’s nucleation efficiency critically impact both the probability and timing of contractile ring formation. To probe the physiological importance of nucleation efficiency, we engineered fission yeast formin chimera strains in which the FH1-FH2 actin assembly domains of full-length cytokinesis formin Cdc12 were replaced with the FH1-FH2 domains from functionally and evolutionarily diverse formins with significantly different actin assembly properties. Although Cdc12 chimeras generally support life in fission yeast, quantitative live-cell imaging revealed a range of cytokinesis defects from mild to severe. In agreement with the computational model, chimeras whose nucleation efficiencies are least similar to Cdc12 exhibit more severe cytokinesis defects, specifically in the rate of contractile ring assembly. Together, our computational and experimental results suggest that fission yeast cytokinesis is ideally mediated by a formin with properly tailored actin assembly parameters.     

Actin polymerization upon processive capping by formin: a model for slowing and acceleration

Formin family proteins act as processive cappers of actin filaments, and determine the dynamics of a number of intracellular processes that are based on actin polymerization. The rate of filament growth upon processive capping varies within a broad range depending on the formin type and presence of profilin. While FH2 domains of various formins slow down polymerization by different extents, the FH1-FH2 domains in conjunction with profilin accelerate the reaction. Study of the physical mechanism of processive capping is vital for understanding the intracellular actin dynamics. We propose a model predicting that variation of a single physical parameter—the effective elastic energy of the formin-capped barbed end—results in the observed diversity of the polymerization rates. The model accounts for the whole range of the experimental results including the drastic slowing down of polymerization by FH2 of Cdc12 formin and the 4.5-fold acceleration of the reaction by FH1-FH2 of mDai1 formin in the presence of profilin. Fitting the theoretical predictions to the experimental curves provides the values of the effective elastic energies of different formin-barbed end complexes.     

Conformational changes in actin filaments induced by formin binding to the barbed end

Formins bind actin filaments and play an essential role in the regulation of the actin cytoskeleton. In this work we describe details of the formin-induced conformational changes in actin filaments by fluorescence-lifetime and anisotropy-decay experiments. The results show that the binding of the formin homology 2 domain of a mammalian formin (mouse mDia1) to actin filaments resulted in a less rigid protein structure in the microenvironment of the Cys374 of actin, weakening of the interactions between neighboring actin protomers, and greater overall flexibility of the actin filaments. The formin effect is smaller at greater ionic strength. The results show that formin binding to the barbed end of actin filaments is responsible for the increase of flexibility of actin filaments. One formin dimer can affect the dynamic properties of an entire filament. Analyses of the results obtained at various formin/actin concentration ratios indicate that at least 160 actin protomers are affected by the binding of a single formin dimer to the barbed end of a filament.     

The mouse formin, FRLalpha, slows actin filament barbed end elongation, competes with capping protein, accelerates polymerization from monomers, and severs filaments

Formins are a conserved class of proteins expressed in all eukaryotes, with known roles in generating cellular actin-based structures. The mammalian formin, FRLalpha, is enriched in hematopoietic cells and tissues, but its biochemical properties have not been characterized. We show that a construct composed of the C-terminal half of FRLalpha (FRLalpha-C) is a dimer and has multiple effects on muscle actin, including tight binding to actin filament sides, partial inhibition of barbed end elongation, inhibition of barbed end binding by capping protein, acceleration of polymerization from monomers, and actin filament severing. These multiple activities can be explained by a model in which FRLalpha-C binds filament sides but prefers the topology of sides at the barbed end (end-sides) to those within the filament. This preference allows FRLalpha-C to nucleate new filaments by side stabilization of dimers, processively advance with the elongating barbed end, block interaction between C-terminal tentacles of capping protein and filament end-sides, and sever filaments by preventing subunit re-association as filaments bend. Another formin, mDia1, does not reduce the barbed end elongation rate but does block capping protein, further supporting an end-side binding model for formins. Profilin partially relieves barbed end elongation inhibition by FRLalpha-C. When non-muscle actin is used, FRLalpha-C's effects are largely similar. FRLalpha-C's ability to sever filaments is the first such activity reported for any formin. Because we find that mDia1-C does not sever efficiently, severing may not be a property of all formins.     

Formin Cdc12’s specific actin assembly properties are tailored for cytokinesis in fission yeast

Formins generate unbranched actin filaments by a conserved, processive actin assembly mechanism. Most organisms express multiple formin isoforms that mediate distinct cellular processes and facilitate actin filament polymerization by significantly different rates, but how these actin assembly differences correlate to cellular activity is unclear. We used a computational model of fission yeast cytokinetic ring assembly to test the hypothesis that particular actin assembly properties help tailor formins for specific cellular roles. Simulations run in different actin filament nucleation and elongation conditions revealed that variations in formin’s nucleation efficiency critically impact both the probability and timing of contractile ring formation. To probe the physiological importance of nucleation efficiency, we engineered fission yeast formin chimera strains in which the FH1-FH2 actin assembly domains of full-length cytokinesis formin Cdc12 were replaced with the FH1-FH2 domains from functionally and evolutionarily diverse formins with significantly different actin assembly properties. Although Cdc12 chimeras generally support life in fission yeast, quantitative live-cell imaging revealed a range of cytokinesis defects from mild to severe. In agreement with the computational model, chimeras whose nucleation efficiencies are least similar to Cdc12 exhibit more severe cytokinesis defects, specifically in the rate of contractile ring assembly. Together, our computational and experimental results suggest that fission yeast cytokinesis is ideally mediated by a formin with properly tailored actin assembly parameters.     

The core FH2 domain of diaphanous-related formins is an elongated actin binding protein that inhibits polymerization

Diaphanous-related formins (Drf) are activated by Rho GTP binding proteins and induce polymerization of unbranched actin filaments. They contain three formin homology domains. Evidence as to the effect of formins on actin polymerization were obtained using FH2/FH1 constructs of various length from different Drfs. Here we define the core FH2 domain as a proteolytically stable domain of approximately 338 residues. The monomeric FH2 domains from mDia1 and mDia3 inhibit polymerization of actin and can bind in a 1:1 complex with F-actin at micromolar concentrations. The X-ray structure analysis of the domain shows an elongated, crescent-shaped molecule consisting of three helical subdomains. The most highly conserved regions of the domain span a distance of 75 A and are both required for barbed-end inhibition. A construct containing an additional 72 residue linker has dramatically different properties: It oligomerizes and induces actin polymerization at subnanomolar concentration.