Control of replication of plasmid R1: formation of an initial transient complex is rate-limiting for antisense RNA--target RNA pairing.

The replication frequency of plasmid R1 is determined by the availability of the initiator protein RepA. Synthesis of RepA is negatively controlled by an antisense RNA, CopA, which forms a duplex with the upstream region of the RepA mRNA, CopT. We have previously shown that the in vitro formation of the CopA-CopT duplex follows second-order kinetics and occurs in at least two steps. The first step is the formation of a transient (kissing) complex, which is subsequently converted to a persistent duplex. Here, we investigate the details of the reaction scheme and determine the rate constants of the pathway from the free RNAs to the complete duplex. Using a shortened CopA RNA (CopI) we have been able to determine the association and dissociation rate constants (k1,k-1) for the kissing complex (which are inferred to be the same for CopI-T and CopA-T), and measured the hybridization rate constant k2 (for CopA-T k2 is at least 1000-fold greater than for CopI-T). The analysis of CopA derivatives of mutant and wild-type origin shows that the rate of formation of the kissing complex is rate-limiting for the overall pairing reaction between CopA and CopT, both in vitro and in vivo. The biological implications of the kinetically irreversible RNA-RNA binding reaction scheme are discussed.     

Bulged residues promote the progression of a loop-loop interaction to a stable and inhibitory antisense-target RNA complex

In several groups of bacterial plasmids, antisense RNAs regulate copy number through inhibition of replication initiator protein synthesis. These RNAs are characterized by a long hairpin structure interrupted by several unpaired residues or bulged loops. In plasmid R1, the inhibitory complex between the antisense RNA (CopA) and its target mRNA (CopT) is characterized by a four-way junction structure and a side-by-side helical alignment. This topology facilitates the formation of a stabilizer intermolecular helix between distal regions of both RNAs, essential for in vivo control. The bulged residues in CopA/CopT were shown to be required for high in vitro binding rate and in vivo activity. This study addresses the question of why removal of bulged nucleotides blocks stable complex formation. Structure mapping, modification interference, and molecular modeling of bulged-less mutant CopA–CopT complexes suggests that, subsequent to loop–loop contact, helix propagation is prevented. Instead, a fully base paired loop–loop interaction is formed, inducing a continuous stacking of three helices. Consequently, the stabilizer helix cannot be formed, and stable complex formation is blocked. In contrast to the four-way junction topology, the loop–loop interaction alone failed to prevent ribosome binding at its loading site and, thus, inhibition of RepA translation was alleviated.     

Progression of a loop-loop complex to a four-way junction is crucial for the activity of a regulatory antisense RNA

The antisense RNA, CopA, regulates the replication frequency of plasmid R1 through inhibition of RepA translation by rapid and specific binding to its target RNA (CopT). The stable CopA-CopT complex is characterized by a four-way junction structure and a side-by-side alignment of two long intramolecular helices. The significance of this structure for binding in vitro and control in vivo was tested by mutations in both CopA and CopT. High rates of stable complex formation in vitro and efficient inhibition in vivo required initial loop-loop complexes to be rapidly converted to extended interactions. These interactions involve asymmetric helix progression and melting of the upper stems of both RNAs to promote the formation of two intermolecular helices. Data presented here delineate the boundaries of these helices and emphasize the need for unimpeded helix propagation. This process is directional, i.e. one of the two intermolecular helices (B) must form first to allow formation of the other (B'). A binding pathway, characterized by a hierarchy of intermediates leading to an irreversible and inhibitory RNA-RNA complex, is proposed.     

Replication control in plasmid R1: duplex formation between the antisense RNA, CopA, and its target, CopT, is not required for inhibition of RepA synthesis.

The replication frequency of plasmid R1 is regulated by an antisense RNA, CopA, which inhibits the synthesis of the rate-limiting initiator protein RepA. The inhibition requires an interaction between the antisense RNA and its target, CopT, in the leader of the RepA mRNA. This binding reaction has previously been studied in vitro, and the formation of a complete RNA duplex between the two RNAs has been demonstrated in vitro and in vivo. Here we investigate whether complete duplex formation is required for CopA-mediated inhibition in vivo. A mutated copA gene was constructed, encoding a truncated CopA which is impaired in its ability to form a complete CopA/CopT duplex, but which forms a primary binding intermediate (the 'kissing complex'). The mutated CopA species (S-CopA) mediated incompatibility against wild-type R1 plasmids and inhibited RepA-LacZ fusion protein synthesis. Northern blot, primer extension and S1 analyses indicated that S-CopA did not form a complete duplex with CopT in vivo since bands corresponding to RNase III cleavage products were missing. An in vitro analysis supported the same conclusion. These data suggest that formation of the 'kissing complex' suffices to inhibit RepA synthesis, and that complete CopA/CopT duplex formation is not required. The implications of these findings are discussed.     

An unusual structure formed by antisense-target RNA binding involves an extended kissing complex with a four-way junction and a side-by-side helical alignment

The antisense RNA CopA binds to the leader region of the repA mRNA (target: CopT). Previous studies on CopA-CopT pairing in vitro showed that the dominant product of antisense RNA-mRNA binding is not a full RNA duplex. We have studied here the structure of CopA-CopT complex, combining chemical and enzymatic probing and computer graphic modeling. CopI, a truncated derivative of CopA unable to bind CopT stably, was also analyzed. We show here that after initial loop-loop interaction (kissing), helix propagation resulted in an extended kissing complex that involves the formation of two intermolecular helices. By introducing mutations (base-pair inversions) into the upper stem regions of CopA and CopT, the boundaries of the two newly formed intermolecular helices were delimited. The resulting extended kissing complex represents a new type of four-way junction structure that adopts an asymmetrical X-shaped conformation formed by two helical domains, each one generated by coaxial stacking of two helices. This structure motif induces a side-by-side alignment of two long intramolecular helices that, in turn, facilitates the formation of an additional intermolecular helix that greatly stabilizes the inhibitory CopA-CopT RNA complex. This stabilizer helix cannot form in CopI-CopT complexes due to absence of the sequences involved. The functional significance of the three-dimensional models of the extended kissing complex (CopI-CopT) and the stable complex (CopA-CopT) are discussed.     

Bulged-out nucleotides in an antisense RNA are required for rapid target RNA binding in vitro and inhibition in vivo.

Naturally occurring antisense RNAs in prokaryotes are generally short, highly structured and untranslated. Stem-loops are always present, and loop regions serve as primary recognition structures in most cases. Single-stranded tails or internal unstructured regions are required for initiation of stable pairing between antisense and target RNA. Most antisense RNAs contain bulged-out nucleotides or small internal loops in upper stem regions. Here we investigated the role of the bulged-out nucleotides of CopA (the copy number regulator of plasmid R1) in determining the binding properties of this antisense RNA to its target in vitro and the efficiency of a translational inhibition in vivo. The introduction of perfect helicity in the region of the two bulges in CopA decreased pairing rate constants by up to 180-fold, increased equilibrium dissociation constants of the 'kissing intermediate' up to 14-fold, and severely impaired inhibition of repA expression. A previously described loop size mutant of CopA showed decreased pairing rates, but, in contrast to the bulge-less mutant CopAs, shows a decreased dissociation constant of the 'kissing complex'. We conclude that removal of the specific bulges/internal loops within the stem-loop II of CopA impairs the inhibitor, and that creation of an internal loop at a different position does not restore activity, emphasizing the optimal folding of wild-type CopA. The accompanying paper shows that an additional function of bulges can be protection from RNase III cleavage.     

Bulged-out nucleotides protect an antisense RNA from RNase III cleavage.

Bulged-out nucleotides or internal loops are present in the stem-loop structures of several antisense RNAs. We have used the antisense/target RNA system (CopA/CopT) that controls the copy number of plasmid R1 to examine the possible biological function of bulged-out nucleotides. Two regions within the major stem-loop of the antisense RNA, CopA, carry bulged-out nucleotides. Base pairing in either one or both of these regions of the stem was restored by site-specific mutagenesis and in one case a new internal loop was introduced. The set of mutant and wild-type CopA variants was characterized structurally in vitro. The results reported here indicate a possible function of the bulges: their presence protects CopA RNA from being a substrate for the double-strand-specific enzyme RNase III. In vitro cleavage rates were drastically increased when either the lower or both bulges were absent. This is paralleled by a similar, but not identical, effect of the bulges on metabolic stability of the CopA RNAs in vivo. The degradation pathways of wild-type and mutant CopA in various strain backgrounds are discussed. In the accompanying paper, we address the significance of bulges in CopA for binding to the target RNA in vitro and for its inhibitory efficiency in vivo.     

Four-way junctions in antisense RNA-mRNA complexes involved in plasmid replication control: a common theme?

In several groups of bacterial plasmids, antisense RNAs regulate copy number through inhibition of replication initiator protein synthesis. In plasmid R1, we have recently shown that the inhibitory complex between the antisense RNA (CopA) and its target mRNA (CopT) is characterized by the formation of two intermolecular helices, resulting in a four-way junction structure and a side-by-side helical alignment. Based on lead-induced cleavage and ribonuclease (RNase) V(1) probing combined with molecular modeling, a strikingly similar topology is supported for the complex formed between the antisense RNA (Inc) and mRNA (RepZ) of plasmid Col1b-P9. In particular, the position of the four-way junction and the location of divalent ion-binding site(s) indicate that the structural features of these two complexes are essentially the same in spite of sequence differences. Comparisons of several target and antisense RNAs in other plasmids further indicate that similar binding pathways are used to form the inhibitory antisense-target RNA complexes. Thus, in all these systems, the structural features of both antisense and target RNAs determine the topologically possible and kinetically favored pathway that is essential for efficient in vivo control.     

Loop swapping in an antisense RNA/target RNA pair changes directionality of helix progression

The binding pathway of the natural antisense RNA CopA to its target CopT proceeds through a hierarchical order of steps. It initiates by reversible loop-loop contacts followed by unidirectional helix progression into the upper stems. This involves extensive breakage of intramolecular base pairs and the subsequent formation of two intermolecular helices, B and B'. Based on the known tRNA anticodon loop structure and on results from the Sok/Hok antisense/target RNA system, it had been suggested that a U-turn (or pi-turn) in the loop of CopT might determine the directionality of helix progression. Data presented here show that the putative U-turn is one of the structural elements of antisense/target RNA pairs required to achieve fast binding kinetics. Swapping of the hypothetical U-turn structure from the target RNA to the antisense RNA retained regulatory performance in vivo and binding rates in vitro but altered the binding pathway by changing the direction in which the initiating helix was extended. In addition, our data indicate that a helical stem immediately adjacent to the target loop sequence is required to provide a scaffold for the U-turn.     

Anchoring hairpin ribozymes to long target RNAs by loop-loop RNA interactions

Efficient ribozyme-mediated gene silencing requires the effective binding of a ribozyme to its specific target sequence. Stable stem-loop domains are key elements for efficiency of natural antisense RNAs. This work tests the possibility of using such naturally existing structural motifs for anchoring hairpin ribozymes when targeting long RNAs. Assays were performed with four catalytic antisense RNAs, based on the hairpin ribozyme (HP), that carried a stable stem-loop motif at their 3' end. Extensions consisted of one of the following motifs: the stem-loop II of the natural antisense RNA-CopA, its natural target in CopT, the TAR-RNA motif, or its complementary sequence alphaTAR. Interestingly, the presence of any of these antisense motifs resulted in an enhancement of catalytic performance against the ribozyme's 14-nucleotide-long target RNA (Swt). A series of artificial, long RNA substrates containing the Swt sequence and the natural TAR-RNA stem-loop were constructed and challenged with a catalytic antisense RNA carrying the TAR-complementary stem-loop. This cleaves each of these substrates significantly more efficiently than HP. The deletion of the TAR domain in the substrate, or its substitution by its complementary counterpart alphaTAR, abolishes the positive effect. These results suggest that the enhancement is owed to the interaction of both complementary stem-loop domains. Moreover, they demonstrate that the TAR domain can be used as an anchoring site to facilitate the access of hairpin ribozymes to their specific target sequences within TAR-containing RNAs.     

A two unit antisense RNA cassette test system for silencing of target genes.

This communication describes a two unit antisense RNA cassette system for use in gene silencing. Cassettes consist of a recognition unit and an inhibitory unit which are transcribed into a single RNA that carries sequences of non-contiguous complementarity to the chosen target RNA. The recognition unit is designed as a stem-loop for rapid formation of long- lived binding intermediates with target sequences and resembles the major stem-loop of a naturally occurring antisense RNA, CopA. The inhibitory unit consists of either a sequence complementary to a ribosome binding site or of a hairpin ribozyme targeted at a site within the chosen mRNA. The contributions of the individual units to inhibition was assessed using the lacI gene as a target. All possible combinations of recognition and inhibitory units were tested in either orientation. In general, inhibition of lacI expression was relatively low. Fifty per cent inhibition was obtained with the most effective of the constructs, carrying the recognition stem-loop in the antisense orientation and the inhibitory unit with an anti-RBS sequence. Several experiments were performed to assess activities of the RNAs in vitro and in vivo : antisense RNA binding assays, cleavage assays, secondary structure analysis as well as Northern blotting and primer extension analysis of antisense and target RNAs. The problems associated with this antisense RNA approach as well as its potential are discussed with respect to possible optimization strategies.     

Thermodynamic and Kinetic Characterization of Antisense Oligodeoxynucleotide Binding to a Structured mRNA

Antisense oligonucleotides act as exogenous inhibitors of gene expression by binding to a complementary sequence on the target mRNA, preventing translation into protein. Antisense technology is being applied successfully as a research tool and as a molecular therapeutic. However, a quantitative understanding of binding energetics between short oligonucleotides and longer mRNA targets is lacking, and selecting a high-affinity antisense oligonucleotide sequence from the many possibilities complementary to a particular RNA is a critical step in designing an effective antisense inhibitor. Here, we report measurements of the thermodynamics and kinetics of hybridization for a number of oligodeoxynucleotides (ODNs) complementary to the rabbit β-globin (RBG) mRNA using a binding assay that facilitates rapid separation of bound from free species in solution. A wide range of equilibrium dissociation constants were observed, and association rate constants within the measurable range correlated strongly with binding affinity. In addition, a significant correlation was observed of measured binding affinities with binding affinity values predicted using a thermodynamic model involving DNA and RNA unfolding, ODN hybridization, and RNA restructuring to a final free energy minimum. In contrast to the behavior observed for hybridization of short strands, the association rate constant increased with temperature, suggesting that the kinetics of association are related to disrupting the native structure of the target RNA. The rate of cleavage of the RBG mRNA in the presence of ribonuclease H and ODNs of varying association kinetics displayed apparent first-order kinetics, with the rate constant exhibiting binding-limited behavior at low association rates and reaction-limited behavior at higher rates. Implications for the rational design of effective antisense reagents are discussed.     

Translational control by antisense RNA in control of plasmid replication

Control of replication of plasmids involves two processes: measurement of the copy number of the plasmid and adjustment of the replication frequency accordingly. For both these processes IncFII plasmids use an antisense RNA (CopA RNA) that forms a duplex with the upstream region (CopT) of the mRNA of the rate-limiting RepA protein. The kinetics of duplex formation was measured in vitro for the wild type and for a cop mutant plasmid; the mutant showed a reduction in the second-order rate constant for the formation of the RNA duplex and a similar increase in copy number. Hence, the kinetics of duplex formation and the concentration of CopA RNA determines the copy number of the plasmid.     

An antisense/target RNA duplex or a strong intramolecular RNA structure 5' of a translation initiation signal blocks ribosome binding: the case of plasmid R1.

Antisense RNAs in prokaryotic systems often inhibit translation of mRNAs. In some cases, this involves sequestration of Shine-Dalgarno (SD) sequences and start codons. In other cases, antisense/target RNA duplexes do not overlap these signals, but form upstream. We have performed toeprinting analyses on repA mRNA of plasmid R1, both free and in duplex with the antisense RNA, CopA. An intermolecular RNA duplex 2 nt upstream of the tap SD prevents ribosome binding. An intrastrand stem-loop at this location yields the same inhibition. Thus, stable secondary structures immediately upstream of the tap SD sequence inhibit translation, as shown by toeprinting in vitro and repA-lacZ expression in vivo. Previous work showed that repA (initiator protein) expression requires tap (leader peptide) translation. Toeprinting data confirm that the tap ribosome binding site (RBS) is accessible, whereas the repA RBS, which is sequestered by a stable stem-loop, is weakly recognized by the ribosome. Truncated CopA RNA (CopI) is unable to pair completely with target RNA, but proceeds normally to a kissing intermediate. This mutant RNA species inhibits repA expression in vivo. By a kinetic toeprint inhibition protocol, we have shown that the structure of the kissing complex is sufficient to sterically prevent ribosome binding. These results are discussed in comparison with the effect of RNA structures elsewhere in the ribosome-binding region of an mRNA.     

HIV-1 TAR as anchoring site for optimized catalytic RNAs

Ribozymes have a great potential for developing specific gene silencing molecules. One of the main limitations to ensure the efficient application of ribozymes is to achieve effective binding to the target. Stem-loop domains support efficient formation of the kissing complex between natural antisense molecules and their target sequence. We have characterized catalytic antisense RNA hybrid molecules composed of a hammerhead ribozyme and a stem-loop antisense domain. A series of artificial RNA substrates containing the TAR-RNA stem-loop and a target for the hammerhead ribozyme were constructed and challenged with a catalytic antisense RNA carrying the TAR complementary stem-loop. The catalytic antisense RNA cleaves each of these substrates significantly more efficiently than the parental hammerhead ribozyme. Deletion of the TAR domain in the substrate abolishes the positive effect. These results suggest that the enhancement is due to the interaction of both complementary stem-loop motifs. A similar improvement was corroborated when targeting the LTR region of HIV-1 with either hammerhead- and hairpin-based catalytic antisense RNAs. Our results indicate that the TAR domain can be used as an anchoring site to facilitate the access of ribozymes to their specific target sequences within TAR-containing RNAs. Finally, we propose the addition of stable stem-loop motifs to the ribozyme domain as a rational way for constructing catalytic antisense RNAs.