Radular mechanosensory neuron in the buccal ganglia of the terrestrial slug,Incilaria fruhstorferi

A radular mechanosensory neuron, RM, was identified in the buccal ganglia of Incilaria fruhstorferi. Fine neurites ramified bilaterally in the buccal ganglia, and main neurites entered the subradular epithelium via buccal nerve 3 (n3). When the radula was distorted by bending, RM produced an afferent spike which was preceded by an axonic spike recorded at n3. The response of RM to radular distortion was observed even in the absence of Ca²⁺, which drastically suppressed chemical synaptic interactions. Therefore, RM was concluded to be a primary radular mechanoreceptor.During rhythmic buccal motor activity induced by food or electrical stimulation of the cerebrobuccal connective, RM received excitatory input during the radular retraction phase. In the isolated buccal ganglia connected to the radula via n3s, the afferent spike, which had been evoked by electrical stimulation of the subradular epithelium, was broadened with the phasic excitatory input. Since the afferent spike was also broadened by current injection into the soma, depolarization due to the phasic input may have produced the spike broadening.Spike broadening was also observed during repetitive firing evoked by current injection. The amplitude of the excitatory postsynaptic potential in a follower neuron increased depending on the spike broadening of RM.Abbreviations CBC cerebrobuccal connective - EPSP excitatory postsynaptic potential - n1,n3 buccal nerves 1 and 3 - RBMA rhythmic buccal motor activity - RM radular mechanosensory neuron - SMT supramedian radular tensor neuron     

Comparative buccal anatomy in Helisoma (mollusca,pulmonata, basommatophora)

Dissections were performed to document buccal anatomy in three species of the pulmonate genus Helisoma Swainson, 1840. The 28 muscles which are responsible for radular feeding in these animals are organized in three concentric and integrated envelopes. The deepest of these includes muscles which manipulate the radula about the odontophoral cartilage. Elements of the middle envelope direct movements of the cartilage within the buccal cavity, and muscles of the outer envelope control movements of the buccal mass within the cephalic haemocoel. Motion analysis by videomicrography showed that muscles of the middle and outer envelopes contribute to the action of radular feeding by acting as antagonists to other muscles and to hydrostatic elements of the buccal apparatus. Observations of radular dentition showed that although each of the three species examined has a unique radula, especially with regard to the specific details of tooth shape, all resemble a radula characteristic of the Planorbidae with regard to other, more general, aspects of ribbon architecture.     

Experimental and comparative morphology of radula renewal in pulmonates (Mollusca,Gastropoda)

Summary The continuous renewal of the pulmonate radula and the histology and regeneration of its concomitant epithelia were studied by light and electron microscopy, autoradiography and electron microprobe analysis. The two species investigated show histological differences and the results were compared with those of a preceding study on a prosobranch radula. The radula is an intricate cuticular structure of the foregut. Only the fully grown part, which is active during feeding, lies in the buccal cavity while it is constantly renewed by the coordinated cooperation of specialized cells forming the radular sheath. The end of the sheath is occupied by cells which produce the organic matrix of the radula. In taeniogloss prosobranchs, seven multicellular cushions of small odontoblasts lie at the end of the sheath and produce the seven teeth of each cross-row. In pulmonates, the multidenticular radula is generated by numerous groups of a few voluminuous cells. Despite these histological differences, prosobranchs and pulmonates generate the radula matrix by microvilli, cytoplasmatic protrusions and apocrine secretions. The epithelia of the radular sheath contribute to the transport, tanning and mineralization of the radula. The concomitant epithelia are replaced in limited proliferation zones at the end of the radular sheath and their cells migrate anteriorly to the buccal cavity. The ultrastructure of the sheath cells and the alterations which they undergo in connection with their functions are discussed. The proliferation zone of the superior epithelium is strictly confined and the cells move together with the radula forward. In prosobranchs, the cells of the superior epithelium begin to degenerate in the middle of the radular sheath and the entire epithelium is simply extruded into the buccal cavity. In pulmonates, the opening of the radular sheath is closed by the cuticular collostylar hood which is generated by a distinct epithelium which is proved to be stationary. When leaving the proliferation zone, the superior epithelium differentiates into supporting cells and mineralizing cells; the latter cause the hardening of the radular teeth and already degenerate in the middle of the sheath. The whole superior epithelium degenerates at the border to the collostylar hood-epithelium. In Lymnaea the degeneration zone is strictly confined whereas in Cepaea the collostylar hood and its generating epithelium extend into the radular sheath and the degeneration zone ranges over a distance of 3–5 rows of teeth. The proliferation zone of the inferior epithelium extends over the posterior half of the radular sheath, but the replacement rate is much lower than in the superior epithelium. Although the inferior epithelium carries the radula, it migrates slower than the radula. Obviously the radula has to be transported actively by apical protrusions of the cells, which penetrate into the radular membrane. At the opening of the radular sheath the inferior epithelium generates the adhesive layer and degenerates. During feeding, the adhesive layer has to maintain the firm mechanical connection between radula and distal radular epithelium. Autoradiographic experiments demonstrate that the distal radular epithelium is stationary. Nevertheless, the radula is known to advance to its degeneration zone. Special attention is paid to this problem. We strongly suspect that the transport of the adhesive layer and the radula is based on pseudopodial movements of apical protrusions characteristic for the distal radular epithelium. These protrusions interdigitate with the lower face of the adhesive layer. The mechanical connection has to be maintained and so the respective structures (tonofilaments and hemi-desmosomes) have to be continually renewed. This needs a high amount of energy and obviously results in the conspicuous concentration of mitochondria near the apical surface.Abbreviations al adhesive layer - ax axon - bc buccal cavity - bce buccal cavity epithelium - bl basal layer - bla basal labyrinth - bm basal membrane - bp basal plate - bpc basal plate cell - c cilia - ch collostylar hood - che collostylar hood-epithelium - cl cuticular layer - col collostyle - cr cell remnant - cts connective tissue sheath - d desmosome - dl upper layer - dre distal radular epithelium - dz degeneration zone - fe front edge - g granula - gol dictyosome - hd hemidesmosome - hl haemolymph - ie inferior epithelium - j jaw - ma tooth matrix - mc mineralizing cell - mem membranoblast - mfb microfibrills - mfl microfilaments - mgb multigranular body - mi mitochondria - mit mitosis - ml middle layer - mt microtubuli - mv microvilli - mw membrane whirl - n nucleus - nc necrotic cluster - nf nerve fibres - nsg neurosecretory granula - o odontophor - od odontoblast - odg odontoblast group - pod pre-odontoblast - rb residual body - rer rough endoplasmatic reticulum - rm radular membrane - rt radula teeth - sc supporting cell - se superior epithelium - sj septate junction - sro subradular organ - ss secretion substance - tf tonofilaments - tsm supramedian tensor muscle - tw terminal web - v vacuole - ves vesicle     

The influence of season and the tidal cycle on division of labour by the radula during feeding in the estuarine brooding gastropod <Emphasis Type="Italic">Crepipatella dilatata</Emphasis> (Calyptraeidae)

The brooding gastropod Crepipatella dilatata can feed by scraping the substrate with the radula and by suspension-feeding, which also requires use of the radula. There is a “division of labour” for the radula among three discrete tasks associated with feeding: (1) removing mucous balls from the food pouch; (2) transferring the mucous cord from the neck channel to the mouth (both components of suspension-feeding); (3) scraping the substrate. We hypothesised that the proportion of time used for each feeding activity varies according to environmental conditions. Total radular activity in females was greatest at high tide and in summer. The rate of radular extrusion for ingesting the mucous cord varied seasonally and between brooding and non-brooding females. Non-brooding females exhibited higher rates of radular extrusion for ingesting the mucous cord and for scraping the substrate than did brooders. In females, radular activity in removing the mucous ball from the food pouch was strongly influenced by the tidal cycle during winter, reaching minimum values at low tide. Differences were recorded in substrate scraping among seasons and within tidal cycles, and among males, brooding females and non-brooding females. Brooding females displayed less rasping than non-brooders, since the area available for grazing was restricted by the egg mass. Throughout the year, including low salinity periods, males allocated a greater proportion of total radular activity to rasping than to removing the mucous ball or ingesting the mucous cord. The feeding behaviour of both males and females is modulated by salinity, but the principal determinants of radular activity are the mode of reproduction (brooding in females) and, in males, motility.     

The buccal apparatus with radula of a ceratitic ammonoid from the German Middle Triassic

Complete ammonoid mouth parts including both mandibles and the radula are rare. A newly prepared specimen of Ceratites penndorfi of the late Anisian from the Franconian Muschelkalk reveals one such anaptychus-type jaw apparatus including several more or less clearly recognisable structures such as the shapes and proportions of the inner and outer lamellae of both mandibles. The lower mandible has a short inner and a long outer lamella with an ovoid outline, while the upper mandible has a slightly arched rostrum and the inner lamella carries two wings. The radula, as far as it is preserved, appears to be homodont with oblique, simply conical, monocuspidate teeth. Some other structures are here illustrated, described and interpreted as both mandibles and oesophageal remains. Additional structures of organic origin are preserved such as the radula, but others are difficult to interpret. Some, if not all, of these structures also were body parts of the ceratite, such as perhaps the radular support and/or the oesophagus. All mouthparts, which are preserved in the specimen described herein, are carbonised except for the radula remains, which are phosphatic. The taphonomy of ceratite mouth parts in the Muschelkalk is shortly discussed.     

Radula formation in two species of Conoidea (Gastropoda)

The radula is the basic feeding structure in gastropod molluscs and exhibits great morphological diversity that reflects the exceptional anatomical and ecological diversity occurring in these animals. This uniquely molluscan structure is formed in the blind end of the radular sac by specialized cells (membranoblasts and odontoblasts). Secretion type, and the number and shape of the odontoblasts that form each tooth characterize the mode of radula formation. These characteristics vary in different groups of gastropods. Elucidation of this diversity is key to identifying the main patterns of radula formation in Gastropoda. Of particular interest would be a phylogenetically closely related group that is characterized by high variability of the radula. One such group is the large monophyletic superfamily Conoidea, the radula of which is highly variable and may consist of the radular membrane with five teeth per row, or the radular membrane with only two or three teeth per row, or even just two harpoon-like teeth per row without a radular membrane. We studied the radulae of two species of Conoidea (Clavus maestratii Kilburn, Fedosov & Kantor, 2014 [Drilliidae] and, Lophiotoma acuta (Perry, 1811) [Turridae]) using light and electron microscopy. Based on these data and previous studies, we identify the general patterns of the radula formation for all Conoidea: the dorsolateral position of two groups of odontoblasts, uniform size, and shape of odontoblasts, folding of the radula in the radular sac regardless of the radula configuration. The morphology of the subradular epithelium is most likely adaptive to the radula type.     

Mechanical reconfiguration mediates swallowing and rejection in Aplysia californica

Muscular hydrostats, such as tongues, trunks or tentacles, have fewer constraints on their degrees of freedom than musculoskeletal systems, so changes in a structure’s shape may alter the positions and lengths of other components (i.e., induce mechanical reconfiguration). We studied mechanical reconfiguration during rejection and swallowing in the marine mollusk Aplysia californica. During rejection, inedible material is pushed out of an animal’s buccal cavity. The grasper (radula/odontophore) closes on inedible material, and then a posterior muscle, I2, pushes the grasper toward the jaws (protracts it). After the material is released, an anterior muscle complex (the I1/I3/jaw complex) pushes the grasper toward the esophagus (retracts it). During swallowing, the grasper is protracted open, and then retracts closed, pulling in food. Grasper closure changes its shape. Magnetic resonance images show that grasper closure lengthens I2. A kinetic model quantified the changes in the ability of I2 and I1/I3 to exert force as grasper shape changed. Grasper closure increases I2’s ability to protract during rejection, and increases I1/I3’s ability to retract during swallowing. Motor neurons controlling radular closure may therefore affect the behavioral outputs of I2’s and I1/I3’s motor neurons. Thus, motor neurons may modulate the outputs of other motor neurons through mechanical reconfiguration.Valerie A. Novakovic and Gregory P. Sutton contributed equally to the paper.     

Age determination and estimation of larval period in field caught abalone (Haliotis discus hannai Ino 1953) larvae and newly metamorphosed post-larvae by counts of radular teeth rows

We developed an age determination method for larval and newly metamorphosed post-larval abalone Haliotis discus hannai in a laboratory experiment and determined the age of field caught individuals. Laboratory experiments showed that competent veliger larvae (4 days after fertilization) had a radula and regularly added rows of radular teeth with age in the absence of metamorphosis. Under environmentally relevant temperatures (17-22 °C), the number of rows of radular teeth increased linearly with age, but slopes of the regression lines were different among temperatures. Rows of radular teeth were added more slowly at lower temperatures. The effect of temperature on the development rate of the radula was quantified by the regression and the temperature coefficient, Q₁₀. The radular development of newly metamorphosed post-larvae, which had not acquired a peristomal shell (adult shell), was comparable with that of veliger larvae, although older post-larvae had a larger number of rows of radula than those of the same age of veliger larvae. From these results, an age determination method of veliger larvae and newly metamorphosed post-larvae was established, using the number of rows of radular teeth. The age of veliger larvae and newly metamorphosed post-larvae was determined by the age determination method for samples collected in August to October of 2003 and 2004 for which the thermal history of the coastal water of Miyagi Prefecture Japan was available. Only 9.1% of veliger larvae (n = 8) captured in the field had formed a radula and these were estimated to be 4-6 days old. The remaining 90.9% of larvae (n = 80) that had not formed a radula were classified as younger than 4 days old. All newly metamorphosed post-larvae (n = 24) that had metamorphosed on substrata were estimated to be 4-6 days old. Results of the field study indicate that these abalone metamorphosed within a few days after the acquisition of competence (4 days after fertilization) at this site, which has suitable crustose algal habitat.     

Main patterns of radula formation and ontogeny in Gastropoda

Gastropoda is morphologically highly variable and broadly distributed group of mollusks. Due to the high morphological and functional diversity of the feeding apparatus gastropods follow a broad range of feeding strategies: from detritivory to highly specialized predation. The feeding apparatus includes the buccal armaments: jaw(s) and radula. The radula comprises a chitinous ribbon with teeth arranged in transverse and longitudinal rows. A unique characteristic of the radula is its continuous renewal during the entire life of a mollusk. The teeth and the membrane are continuously synthesized in the blind end of the radular sac and are shifted forward to the working zone, while the teeth harden and are mineralized on the way. Despite the similarity of the general mechanism of the radula formation in gastropods, some phylogenetically determined features can be identified in different phylogenetic lineages. These mainly concern shape, size, and number of the odontoblasts forming a single tooth. The radular morphology depends on the shape of the formation zone and the morphology of the subradular epithelium. The radula first appears at the pre- and posttorsional veliger stages as an invagination of the buccal epithelium of the larval anterior gut. The larval radular sac is lined with uniform undifferentiated cells. Each major phylogenetic lineage is characterized by a specific larval radula type. Thus, the docoglossan radula of Patellogastropoda is characterized by initially three and then five teeth in a transverse row. The larval rhipidoglossan radula has seven teeth in a row with differentiation into central, lateral, and marginal teeth and later is transformed into the adult radula morphology by the addition of lateral and especially marginal teeth. The taenioglossan radula of Caenogastropoda is nearly immediately formed in adult configuration with seven teeth in a row.     

Functional adaptations of the digestive system of the carnivorous mollusc Pleurobranchaea californica MacFarland, 1966

The opisthobranch mollusc Pleurobranchaea californica feeds on whole organisms and the functional morphology of the digestive system reflects this behavior. By a rhythmic behavior involving well-developed extrinsic buccal muscles and hemocoelic fluid, the buccal mass is protracted to the tip of the everted oral tube. Here a series of repeated protractions and retractions of the intrinsic buccal muscles associated with the flat radular ribbon and jaws draws the prey into the buccal cavity and conveys it to the dorsal esophagus, where by peristaltic action it is passed to the expansible crop for storage. Prey entering the buccal cavity is mixed with acid from a large single gland and secretion from the paired salivary glands. Prey is retained in the crop over long periods of time while it is slowly broken down and passed via the stomach into the digestive glands. Special modifications that allow flexibility of the digestive organs include elongated salivary gland ducts with propulsive bulbs, long flexible nerve cords connecting the ganglia, a long, large muscular duct for storage of the acid secretion, large jaws for muscle attachment and grasping the prey, and a broad radular ribbon with many teeth that acts as a conveyor belt to move food. Additional modifications for handling whole prey include a buccal membrane that aids in maintaining hemocoelic fluid pressure, the extensive acid gland for immobilization of prey, and the expansible crop for storage of food.     

Action and immunoreactivity of neuropeptides in the buccal neuromuscular system of a prosobranch mollusc,Rapana thomasiana

Summary In a prosobranch mollusc, Rapana thomasiana, the catch-relaxing peptide H-Ala-Met-Pro-Met-Leu-Arg-Leu-NH₂ (CARP) was found to depress the contraction of the radula protractor and retractor elicited by electrical stimulations. The action of CARP was in contrast to that of other neuropeptides, H-Phe-Met-Arg-Phe-NH₂ (FMRFamide) and H-Phe-Leu-Arg-Phe-NH₂ (FLRFamide), which enhanced the contraction of the radula protractor and retractor, respectively. By immunohistochemical examinations, FMRFamide-like immunoreactive neurons were found on the rostral side of the right buccal ganglion and the caudal side of the left ganglion, where some CARP-like immunoreactive neurons were also distributed, indicating a possible coexistence of FMRFamide and CARP. FMRFamide- and CARP-like immunoreactivities were also detected in the neuropile of buccal ganglia, radula nerves arising from the ganglia, and nerve fibers in the radula muscles. The present results suggest that FMRFamide- and CARP-like peptides are involved in the regulation of the contraction of the radula muscles.     

Modulation of the feeding system by a radular mechanosensory neuron in the terrestrial slug,Incilaria fruhstorferi

We investigated the modulatory role of a radular mechanoreceptor (RM) in the feeding system of Incilaria. RM spiking induced by current injection evoked several cycles of rhythmic buccal motor activity in quiescent preparations, and this effect was also observed in preparations lacking the cerebral ganglia. The evoked rhythmic activity included sequential activation of the inframedian radular tensor, the supramedian radular tensor, and the buccal sphincter muscles in that order.In addition to the generation of rhythmic motor activity, RM spiking enhanced tonic activities in buccal nerve 1 as well as in the cerebrobuccal connective, showing a wide excitatory effect on buccal neurons. The excitatory effect was further examined in the supramedian radular tensor motoneuron. RM spiking evoked biphasic depolarization in the tensor motoneuron consisting of fast excitatory postsynaptic potentials and prolonged depolarization lasting after termination of RM spiking. These depolarizations also occurred in high divalent cation saline, suggesting that they were both monosynaptic.When RM spiking was evoked in the fictive rasp phase during food-induced buccal motor rhythm, the activity of the supramedian radular tensor muscle showed the greatest enhancement of the three muscles tested, while the rate of ongoing rhythmic motor activity showed no increase.Abbreviations CPG central pattern generator - EPSP excitatory postsynaptic potential - RBMA rhythmic buccal motor activity - RM radular mechanosensory neuron - SMT supramedian radular tensor neuron     

Seasonal aberrant radular formation in Thais bronni (Dunker) and T. clavigera (Küster) (Gastropoda : Muricidae)

Radulae of Thais bronni (Dunker) and T. clavigera (Küster) were examined at Mukaishima Island for a period of 2 yr, 1982 to 1984. Radulae of both species are similar in morphology, both having the basic pentacuspid rachidian plan. Sexual dimorphism of the radula was not observed, but rachidian tooth changes morphologically in different growth stages. Seasonal conditions affect the size and shape of the radula; in winter it is clearly malformed and strikingly thin. These aberrant parts of the radula comprised some dozens of rows, in which only several extremely thin rows exist. Results of experiments using T. clavigera under different water temperature conditions showed that the radula is rarely produced below 10 °C and that rate of radular production and replacement increases with increase in temperature. These results suggest that in the field the radula of these species is replaced entirely 2–2.5 times per year and 10–15 times during the life of the animal.     

Key innovations in Mesozoic ammonoids: the multicuspidate radula and the calcified aptychus

A nearly complete radula with seven elements per row preserved inside of an isolated, bivalved, calcitic lower jaw (= aptychus) of the Late Jurassic ammonite Aspidoceras is described from the Fossillagerstätte Painten (Bavaria, southern Germany). It is the largest known ammonite radula and the first record for the Perisphinctoidea. The multicuspidate tooth elements (ctenodont type of radula) present short cusps. Owing to significant morphological differences between known aptychophoran ammonoid radulae, their possible function is discussed, partly in comparison with modern cephalopod and gastropod radulae. Analogies between the evolution of the pharyngeal jaws of cichlid fishes and the ammonoid buccal apparatus raise the possibility that the evolution of a multicuspidate radula allowed for a functional decoupling of the aptychophoran ammonoid jaw. The radula, therefore, represents a key innovation which allowed for the evolution of the calcified lower jaws in Jurassic and Cretaceous aptychophoran ammonites. Possible triggers for this morphological change during the early Toarcian are discussed. Finally, we hypothesize potential adaptations of ammonoids to different feeding niches based on radular tooth morphologies.     

Towards species identification of the bathyal octopod Graneledone (Mollusca: Cephalopoda)

The number of skin warts has traditionally been cited as a means of separating species in the benthic octopod genus Graneledone, but species-level taxonomy has been problematic since the discovery of a second population. We investigated whether the distribution of skin warts can simply and reliably distinguish similar species by comparing North-east Pacific specimens of Graneledone and North-west Atlantic specimens of G. verrucosa. Two characters, the presence/absence of warts at the posterior tip of the dorsal mantle and the position of the most distal arm wart quantified by the arm sucker number, separate the species. The absence of warts from the distal arms, the third arm pair, and from the lateral web (Sector C) appears to separate these species from congeners based on literature information. Wart distribution may effectively distinguish species throughout the genus, accomplishing the necessary first step in furthering our knowledge of deep-sea biodiversity and reconstructing phylogenetic relationships.     

两种石磺齿舌形态差异分析

显微观察了瘤背石磺(Onchidiumstruma)和石磺(O. verruculatum)齿舌的形态结构。运用差异系数法对两种石磺齿舌参数进行比较分析。利用SPSS10.0对瘤背石磺、石磺齿舌参数(齿舌长、齿舌头宽、齿舌中宽、齿舌尾宽、横列数、每排最少齿片数和每排最多齿片数)与个体参数(体长、体宽、体高、足长、足宽和体重)作回归分析。结果表明,两种石磺齿舌都很发达,外观呈长统靴状;齿片排成许多横列,每一横列均有中央齿一枚,侧齿若干无缘齿;两种石磺的齿舌头宽、齿舌中宽和齿舌尾宽差异极显著,但差异系数小于1.28,认为两种石磺的齿片形态存在明显的种间差异,但齿舌参数不适合作为石磺属贝类的分类依据;瘤背石磺的体宽和石磺的体重在评估各自齿舌生物学性状方面起到比较重要的作用。     

RADULAR PRODUCTION RATES IN TWO SPECIES OF LACUNA TURTON (GASTROPODA: LITTORINIDAE)

The molluscan radula is a dynamic organ, both in terms of itsuse and production. New rows of teeth are constantly producedat the posterior end of the radula, while older, worn teethare shed anteriorly, producing a dynamic equilibrium. We useda cold-shock to mark the radular ribbon and measure tooth rowproduction rates in two gastropod species, Lacuna vincta (Montagu)and L. vanegata Carpenter. We found that the average tooth rowproduction rate at 10–11°C did not differ betweenthese two species, and was 2.94 (SE = 0.002) rows per day forLacuna vincta and 2.97 (SE = 0 002) for L. vanegata Inter-individualvariability in production rate was very low, and was correlatedwith shell length, smaller individuals had slightly higher productionrates. The total length of the radular nbbon varied greatlyamong individuals, ranging from 47 to 94 (2.57 to 5.68 mm) rowsin L vincta and 53 to 99 rows (2.80 to 7.14 mm) in L vanegata,and was only somewhat correlated with the length of the shelLThis great variability will result in large differences amongindividuals in the time it takes to replace the radula totally,from 14.96 to 35.44 days in L vincta and from 17 43 to 39 69days in L. vanegata. (Received 1 September 1995; accepted 20 November 1995)     

Factors affecting the spatial distribution of natural populations of Octopus joubini robson

Observations were made on the density and distribution of Octopus joubini in its natural environment. The average density of octopuses was 1/33 m² but their distribution was clumped. This distribution correlated significantly with the distribution of molluscan shells in which they hid. In addition, octopuses were attracted to sites that had been enriched with extra empty gastropod shells. Since site stability was not observed and they were not repelled from one another when placed at a high density, octopuses were probably not spaced by social pressure. Small crab species, the normal prey of O. joubini, were at a very high density of 30/m², and food abundance probably did not limit octopus number. The main factor affecting distribution of this population of octopuses may be predator pressure acting through the availability of places to hide.