Enzymatic synthesis of 1,3-dihydroxyphenylacetoyl-sn-glycerol: Optimization by response surface methodology and evaluation of its antioxidant and antibacterial activities

In this study, the enzymatic synthesis of phenylacetoyl glycerol ester was carried out as a response to the increasing consumer demand for natural compounds. 1,3-dihydroxyphenylacetoyl-sn-Glycerol (1,3-di-HPA-Gly), labeled as “natural” compound with interesting biological properties, has been successfully synthesized for the first time in good yield by a direct esterification of glycerol (Gly) with p-hydroxyphenylacetic acid (p-HPA) using immobilized Candida antarctica lipase as a biocatalyst. Spectroscopic analyses of purified esters showed that the glycerol was mono- or di-esterified on the primary hydroxyl group. These compounds were evaluated for their antioxidant activity using two different tests. The glycerol di-esters (1,3-di-HPA-Gly) showed a higher antiradical capacity than that of the butyl hydroxytoluene. Furthermore, compared to the p-HPA, synthesized ester (1,3-di-HPA-Gly) exhibited the most antibacterial effect mainly against Gram + bacteria. Among synthesized esters the 1,3-di-HPA-Gly was most effective as antioxidant and antibacterial compound. These findings could be the basis for a further exploitation of the new compound, 1,3-di-HPA-Gly, as antioxidant and antibacterial active ingredient in the cosmetic and pharmaceutical fields.     

Lipase-catalyzed synthesis of glycerol carbonate from renewable glycerol and dimethyl carbonate through transesterification

Glycerol carbonate is a key multifunctional compound employed as solvent, additive, monomer, and chemical intermediate. Enzymatic synthesis of glycerol carbonate from renewable starting materials (glycerol and dimethyl carbonate) was successfully achieved by immobilized lipase from Candida antarctica (CALB, Novozym 435). Addition of molecular sieves as scavenger for the removal of methanol, which was generated from dimethyl carbonate during the reaction, accelerated a reaction rate. After the optimization, the equimolar use of glycerol and dimethyl carbonate in the Novozym 435-catalyzed reaction yielded a glycerol carbonate with almost quantitative yield. The resulting glycerol carbonate from 60 °C reaction has shown the low enantiomeric excess (13% ee) as configuration of (R)-enantiomer.     

Tools and ingredients for the biocatalytic synthesis of metabolites

Metabolic networks have been an interesting starting point not only for the design of synthetic routes in a similar sequence of reactions, e.g., in biomimetic syntheses, but also for assembling a number of biocatalytic steps by preparing the required enzymes and auxiliary reagents. Retrosynthetic analysis involving multiple biocatalytic reactions steps therefore needs to consider the practically realized biocatalytic single steps. The opportunities for route selection are enlarged if novel synthetic reactions connecting easily available starting materials and products are found, and/or both biocatalytic and classical reactions of organic chemistry are utilized. Tools and ingredients for biocatalytic synthesis are of special interest for reactions difficult to achieve by classical organic synthesis. Densely and differentially functionalized small molecules do not allow much space for protecting or activating groups. Biocatalytic reactions have therefore performed well for a number of useful metabolites in enantiopure form to achieve full functionality. Although many well-known metabolites from classical biochemistry have only been prepared in racemic form, it is of fundamental interest to have these available in enantiomerically pure form. Biocatalytic reactions with nature's privileged chiral catalysts appear to be a promising synthetic strategy towards these metabolites, especially when sensitive or stable-isotope-labeled metabolites are to be prepared. The main applications for these metabolites are as references materials in metabolomics, as enzyme substrates for the characterization of metabolic enzyme activities and as potential pharmaceuticals in biomedical research. The use of stable-isotope-labeled metabolites can thereby simplify in vivo applications and metabolic flux analyses.     

Oxidoreductases and Hydroxynitrilase Lyases: Complementary Enzymatic Technologies for Chiral Alcohols

Biocatalytic processes are useful methods for the production of chiral intermediates. As an example, alcohol dehydrogenases are applied for the production of chiral alcohols by asymmetric reduction of prochiral ketones. From this class of enzymes alcohol dehydrogenase from Lactobacillus brevis will be described with respect to its industrial application. The process for the production of methyl (R)‐3‐hydroxybutyrate using this enzyme is discussed in more detail. The application of alcohol dehydrogenases can be limited by the commercial availability of the starting material as, for instance, in the case of the synthesis of chiral α‐hydroxy acids. For these products asymmetric addition of hydrocyanic acid to aldehydes catalyzed by hydroxynitrile lyases such as (S)‐oxynitrilase from Manihot esculenta is a complementary approach. Also, this enzyme will be characterized in more detail with respect to its industrial production and application.     

Biotransformation: a green and efficient way of antioxidant synthesis

Antioxidant compounds play a vital role in human physiology. They prevent the oxidation of biomolecules by scavenging free radicals produced during physiochemical processes and/or as a result of several pathological states. A balance between the reactive oxygen species (free radicals) and antioxidants is essential for proper physiological conditions. Excessive free radicals cause oxidative stress which can lead to several human diseases. Therefore, synthesis of the effective antioxidants is crucial in managing the oxidative stress. Biotransformation has evolved as an effective technique for the production of structurally diverse molecules with a wide range of biological activities. This methodology surpasses the conventional chemical synthesis due to the fact that enzymes, being specific in nature, catalyze reactions affording products with excellent regio- and stereoselectivities. Structural transformation of various classes of compounds such as alkaloids, steroids, flavonoids, and terpenes has been carried out through this technique. Several bioactive molecules, especially those having antioxidant potential have also been synthesized by using different biotransformation techniques and enzymes. Hydroxylated, glycosylated, and acylated derivatives of phenols, flavonoids, cinnamates, and other molecules have proven abilities as potential antioxidants. A critical review of the biotransformation of these compounds into potent antioxidant metabolites is presented here.     

Enzymatic synthesis of short‐chain esters in n‐hexane and supercritical carbon dioxide: Effect of the acid chain length

Enzymatic synthesis is the preferred way to produce so‐called “natural products.” Hydrolases have been used for short‐chain ester synthesis. These esters present a pleasant flavor and they have a lot of applications in different industries. Novozym 435 from Candida antarctica (EC 3.1.1.3, triacylglycerol lipase) was used for hexyl ester synthesis in n‐hexane and supercritical carbon dioxide (SCCO₂). Direct esterification provided higher yields than transesterification for the synthesis of esters. Several carboxylic acids of different chain lengths were tested for the esterification reactions: acetic, propionic, butyric, caproic and caprylic acids. The reactions were carried out at 40°C and the amount of enzyme used was 13.8 g/mol alcohol. Substrates were added at equimolar concentrations, with sufficient stirring to avoid external diffusion control. Different substrate concentrations up to 1.5 M were used. The working pressure was 14 MPa in the case of SCCO₂ and atmospheric pressure in the case of organic solvent. The results in both solvents show that the reaction rate increases with the chain length of the acid, but the final yields were similar. However, some of the reactions prove to be faster in SCCO₂, except for hexyl acetate and propionate synthesis, in which acetic and propionic acid presented a lower solubility in SCCO₂ due to its high polarity. Moreover, an acetic acid concentration of 1.5 M brought about a strong inhibition of the enzyme activity.     

Lipase-catalyzed synthesis and characterization of 1-butanoyl-2-palmitoyl phosphatidylcholine, a potential lipidic prodrug of butyric acid

1-Butanoyl-2-palmitoyl phosphatidylcholine was synthesized from dipalmitoylphosphatidylcholine (DPPC) and butyric acid using a lipase catalyzed transesterification in toluene at controlled water activity. A high fatty acid concentration and low water activity were essential for the enzymatic synthesis. The transesterification resulted in 97.3% incorporation of butyric acid in the sn-1 position with negligible incorporation in the sn-2-position. In mixtures with water, a liquid crystalline phase was formed in equilibrium with a micellar phase. The prepared phospholipid derivative could find applications as a lipidic anticancer prodrug of butyric acid.     

Efficient synthesis of l-tert-leucine through reductive amination using leucine dehydrogenase and formate dehydrogenase coexpressed in recombinant E. coli

Enantiopure l-tert-leucine (l-Tle) was synthesized through reductive amination of trimethylpyruvate catalyzed by cell-free extracts of recombinant Escherichia coli coexpressing leucine dehydrogenase (LeuDH) and formate dehydrogenase (FDH). The leudh gene from Lysinibacillus sphaericus CGMCC 1.1677 encoding LeuDH was cloned and coexpressed with NAD⁺-dependent FDH from Candida boidinii for NADH regeneration. The batch reaction conditions for the synthesis of l-Tle were systematically optimized. Two substrate feeding modes (intermittent and continuous) were addressed to alleviate substrate inhibition and thus improve the space-time yield. The continuous feeding process was conveniently performed in water at an overall substrate concentration up to 1.5 M, with both conversion and ee of >99% and space-time yield of 786 g L⁻¹ d⁻¹, respectively. Furthermore, the preparation was successfully scaled up to a 1 L scale, demonstrating the developed procedure showed a great industrial potential for the production of enantiopure l-Tle.     

Solvent Effects on Equilibrium Position and Initial Rate of Lipase-catalyzed Esterification Reactions in Organic Solvents: Experimental Results and Prediction Capabilities

The solvent effect on the equilibrium position and the initial rate of esterification of 1-hexanol with acetic acid catalyzed by a lipase has been experimentally investigated. A variety of non-polar and polar solvents have been considered and the results obtained indicate that the solvent effect on the equilibrium conversion is very important compared to that for transesterification reactions. A theoretically sound methodology using the group-contribution UNIFAC model for the prediction of solvent effects on the equilibrium position of enzymatic reactions is presented and it is applied to the reaction of 1-hexanol with acetic acid as well as to a similar reaction from the literature. The results obtained are better than those from empirical methods proposed in the literature such as correlations with the octanol-water partition coefficient of the solvent, as well as the solubility of water in the solvent. Moreover, the proposed methodology can be used for the determination of the equilibrium constant of the reaction. For the prediction of the solvent effect on the initial rate of enzymatic reactions it is found that it is more accurately determined using the product of the activities of the reactants, which can be predicted by the UNIFAC model, than the octanol-water partition coefficient of the solvent or the solubility of water in the solvent.     

Solvent Effects on Equilibrium Position and Initial Rate of Lipase-catalyzed Esterification Reactions in Organic Solvents: Experimental Results and Prediction Capabilities

The solvent effect on the equilibrium position and the initial rate of esterification of 1-hexanol with acetic acid catalyzed by a lipase has been experimentally investigated. A variety of non-polar and polar solvents have been considered and the results obtained indicate that the solvent effect on the equilibrium conversion is very important compared to that for transesterification reactions. A theoretically sound methodology using the group-contribution UNIFAC model for the prediction of solvent effects on the equilibrium position of enzymatic reactions is presented and it is applied to the reaction of 1-hexanol with acetic acid as well as to a similar reaction from the literature. The results obtained are better than those from empirical methods proposed in the literature such as correlations with the octanol-water partition coefficient of the solvent, as well as the solubility of water in the solvent. Moreover, the proposed methodology can be used for the determination of the equilibrium constant of the reaction. For the prediction of the solvent effect on the initial rate of enzymatic reactions it is found that it is more accurately determined using the product of the activities of the reactants, which can be predicted by the UNIFAC model, than the octanol-water partition coefficient of the solvent or the solubility of water in the solvent.     

Large scale enzymatic synthesis of oligosaccharides and a novel purification process

Herein we report the practical chemo enzymatic synthesis of trisaccharide and derivatives of iGb3 and Gb3, and a novel purification process using immobilized yeast to remove the monosaccharide from the reaction mixture. High purity oligosaccharide compounds were achieved in large scale. This study represents a facile enzymatic synthesis of and novel purification process of oligosaccharide.     

Enzymatic synthesis of the acrylic esters: a comparative study

Various acrylic esters were synthesized by Candida cylindracea lipase (CCL) catalysed transesterification with different alcohols. A comparative study was carried out using 2,3-butanedione mono-oxime acrylate and vinyl acrylate as acylating agents. The rate of conversion was faster when oxime acrylate was used as acylating agent as compared to vinyl acrylate. Effect of solvents on the rate of conversion was studied and diisopropyl ether (DIPE) was proved to be a better solvent as compared to CHCl₃ and THF. The effect of various structural aspects of the substrates on the rate of conversion was studied. Among the linear alcohols studied, ease of conversion was found to be in the order of n-octanol>n-hexanol>n-butanol. Up to 80% conversion was achieved in the case of cyclohexyl methanol.     

Response surface modeling of 1-stearoyl-3(2)-oleoyl glycerol production in a pilot packed-bed immobilized Rhizomucor miehei lipase reactor

A dual response approach using diacylglycerol (DAG) and triacylglycerol (TAG) as responses for optimization of 1-stearoyl-3(2)-oleoyl glycerol-enriched DAG synthesis using response surface methodology (RSM) was investigated. Four variables from a lipase-catalyzed esterification reaction were optimized using a central composite rotatable design. The following optimized conditions yielded 51 wt.% DAG and 22 wt.% TAG: reaction temperature of 55 °C, enzyme dosage of 9.5 wt.%, fatty acid/glycerol molar ratio of 2.1 and reaction time of 3 h. Results were repeatable at 10 kg production scale in a pilot packed-bed enzyme reactor. No significant losses in enzyme activity or changes in fatty acid selectivity on DAG synthesis were observed during the five pilot productions. Lipozyme RM IM showed selectivity towards the production of stearic acid enriched DAG. The purity of DAG oil after purification was 90 wt.%.     

Enantioselective synthesis and olfactory evaluation of 13-alkyl-substituted alpha-ionones

To study the influence of the steric bulk of the substituents at C(5) on the olfactory characteristics of alpha-ionone, the (S)-antipodes of compounds 8-10 were synthesized starting from (S)-alpha-cyclogeraniol (14a). The latter was available in useful preparative yield with 95% ee by enantioselective lipase-PS-mediated acetylation of the racemic mixture. Key step in the conversion of 14a to 8-10 was an S(N)2'-type reaction of an organocuprate on the allylic phosphate 20, which appears to be a general method for the introduction of an alkyl substituent at the cyclohexene C=C bond of ionones. Olfactory evaluation showed that, compared to the parent (S)-alpha-ionone (1), the odor strength and fragrance facets of the three analogues 8-10 are significantly influenced by the bulkiness of the substituent at C(13), giving further evidence that hydrophobic interactions of this group play a significant role in the chemoreception of ionones. In particular, the odor of the ethyl derivative 8 was found to be significantly stronger than that of the parent (S)-alpha-ionone (1).     

In vitro synthesis of artificial polysaccharides by glycosidases and glycosynthases

Artificial polysaccharides produced by in vitro enzymatic synthesis are new biomaterials with defined structures that either mimic natural polysaccharides or have unnatural structures and functionalities. This review summarizes recent developments in the in vitro polysaccharide synthesis by endo-glycosidases, grouped in two major strategies: (a) native retaining endo-glycosidases under kinetically controlled conditions (transglycosylation with activated glycosyl donors), and (b) glycosynthases, engineered glycosidases devoid of hydrolase activity but with high transglycosylation activity. Polysaccharides are obtained by enzymatic polymerization of simple glycosyl donors by repetitive condensation. This approach not only provides a powerful methodology to produce polysaccharides with defined structures and morphologies as novel biomaterials, but is also a valuable tool to analyze the mechanisms of polymerization and packing to acquire high-order molecular assemblies.     

Enzymatic synthesis and properties of uridine-5'-O-(2-thiodiphospho)-N-acetylglucosamine

This paper describes an enzymatic approach to obtain a thio-containing UDP-GlcNAc analog. We use an assay based on capture of the carbohydrate and analysis by mass spectrometry to quantitatively characterize the activity of this unnatural sugar donor in a LgtA-mediated glycosylation reaction.     

Enzymatic synthesis of a new inhibitor of alpha-amylases: acarviosinyl-isomaltosyl-spiro-thiohydantoin

Synthesis of acarviosinyl-isomaltosyl-spiro-thiohydantoin in yields up to 20%, has been achieved by Bacillus stearothermophilus maltogenic amylase (BSMA). BSMA is capable of transferring the acarviosine-glucose residue from an acarbose donor onto glucopyranosylidene-spiro-thiohydantoin. Reactions were followed using HPLC and MALDI-TOF MS. 1H and 13C NMR studies revealed that the enzyme reserved its stereoselectivity. Glycosylation took place mainly at C-6 resulting in alpha-acarviosinyl-(1-->4)-alpha-D-glucopyranosyl-(1-->6)-D-glucopyranosylidene-spiro-thiohydantoin. This compound was found to be a much more efficient salivary amylase inhibitor than glucopyranosylidene-spiro-thiohydantoin with kinetic constants of K(EI)=0.19 microM and K(ESI)=0.24 microM.     

Comparison of soluble and immobilized trypsin kinetics: Implications for peptide synthesis

The protease trypsin was immobilized to porous glass in both the presence and absence of acetylated soybean trypsin inhibitor (STI) to determine whether immobilization could alter enzyme activity in favor of aminolysis over hydrolysis. Actiive-site titration with 4-methylumbelliferylguanidinobenzoate (MUGB) showed that only about 10% of immobilized trypsin had catalytic activity. Immobilization in the presence of STI produced a higher yield of active enzyme accessible to the inhibitor but did not increase the total yield of MUGB-active immobilized enzyme. Thus, enzyme inactivation upon immobilization could not be attributed to an inaccessible enzyme orientation, nor did STI prevent inactivation by stabilizing the active-site conformation. Kinetic parameters were determined for soluble and immobilized trypsin for two esters, N-tosyl-L-arginine methyl ester (TAME) and N-benzoyl-L-arginine ethyl ester (BAEE), and two amides, N-benzoyl-L-arginine p-nitroanilide (BAPNA) and N-t-boc-leucylglycylarginine p-nitroanilide (LGRNA). In all cases, immobilization caused a greater decrease in k(cat) for amidase activity than for esterase activity. The ratio [k(cat)/ K(m) (ester)]/[k(cat)/K(m) (amide)] increased slightly or stayed the same (for I.GRNA) or decreased sharply (for BAPNA). Including STI during immobilization had little effect on the active enzyme's intrinsic kinetics. A direct comparison of energy diagrams and free energies of activation for BAEE and BAPNA indicates that immobilization raises the free energy barriers for both amide and ester hydrolysis and lowers the energy barrier for aminolysis. In practice, these effects should lower the amidase activity and increase the aminolysis-hydrolysis ratio, rendering the immobilized enzyme a more efficient catalyst for peptide synthesis. (c) 1993 John Wiley & Sons, Inc.     

The kinetics and mechanism of the formation of crystalline phase of dipalmitoylphosphatidylethanolamine dispersed in aqueous dimethyl sulfoxide solutions

The phase transition kinetics and mechanism of formation of a lamellar-crystalline phase of dipalmitoylphosphatidylethanolamine (DPPE) dispersed in different concentrations of aqueous dimethyl sulfoxide (DMSO) during cooling have been examined by differential scanning calorimetry and synchrotron X-ray diffraction techniques. In dispersions containing mole fractions of DMSO (x<0.22), the phase transition sequence of the phospholipid is from lamellar liquid-crystal phase to lamellar-gel phase. Increasing the mole fraction of DMSO to 0.220.5 resulted in a direct transition from liquid-crystal phase to lamellar crystal phase with no detectable intermediate gel phase. A temperature versus DMSO concentration phase diagram was constructed based on calorimetric data with phase assignments made using synchrotron X-ray diffraction measurements. The non-isothermal formation kinetics of the lamellar crystal phase, which is expressed as the half time of the transformation process, was found to depend on DMSO concentration. The inducement of lamellar crystal phase in DPPE by DMSO is discussed in terms of the dehydration effect of DMSO and competitive molecular interactions between DMSO, water, and the phospholipid.