Chemical genetic screening identifies a novel inhibitor of parallel alignment of cortical microtubules and cellulose microfibrils

It is a well-known hypothesis that cortical microtubules control the direction of cellulose microfibril deposition, and that the parallel cellulose microfibrils determine anisotropic cell expansion and plant cell morphogenesis. However, the molecular mechanism by which cortical microtubules regulate the orientation of cellulose microfibrils is still unclear. To investigate this mechanism, chemical genetic screening was performed. From this screening, 'SS compounds' were identified that induced a spherical swelling phenotype in tobacco BY-2 cells. The SS compounds could be categorized into three classes: those that disrupted the cortical microtubules; those that reduced cellulose microfibril content; and thirdly those that had neither of these effects. In the last class, a chemical designated 'cobtorin' was found to induce the spherical swelling phenotype at the lowest concentration, suggesting strong binding activity to the putative target. Examining cellulose microfibril regeneration using taxol-treated protoplasts revealed that the cobtorin compound perturbed the parallel alignment of pre-existing cortical microtubules and nascent cellulose microfibrils. Thus, cobtorin could be a novel inhibitor and an attractive tool for further investigation of the mechanism that enables cortical microtubules to guide the parallel deposition of cellulose microfibrils.     

Cellulose microfibril alignment recovers from DCB-induced disruption despite microtubule disorganization

Cellulose microfibril deposition patterns define the direction of plant cell expansion. To better understand how microfibril alignment is controlled, we examined microfibril orientation during cortical microtubule disruption using the temperature-sensitive mutant of Arabidopsis thaliana, mor1-1. In a previous study, it was shown that at restrictive temperature for mor1-1, cortical microtubules lose transverse orientation and cells lose growth anisotropy without any change in the parallel arrangement of cellulose microfibrils. In this study, we investigated whether a pre-existing template of well-ordered microfibrils or the presence of well-organized cortical microtubules was essential for the cell to resume deposition of parallel microfibrils. We first transiently disrupted the parallel order of microfibrils in mor1-1 using a brief treatment with the cellulose synthesis inhibitor 2,6-dichlorobenzonitrile (DCB). We then analysed the alignment of recently deposited cellulose microfibrils (by field emission scanning electron microscopy) as cellulose synthesis recovered and microtubules remained disrupted at the mor1-1 mutant's non-permissive culture temperature. Despite the disordered cortical microtubules and an initially randomized wall texture, new cellulose microfibrils were deposited with parallel, transverse orientation. These results show that transverse cellulose microfibril deposition requires neither accurately transverse cortical microtubules nor a pre-existing template of well-ordered microfibrils. We also demonstrated that DCB treatments reduced the ability of cortical microtubules to form transverse arrays, supporting a role for cellulose microfibrils in influencing cortical microtubule organization.     

Progress in understanding the role of microtubules in plant cells

Microtubules have long been known to play a key role in plant cell morphogenesis, but just how they fulfill this function is unclear. Transverse microtubules have been thought to constrain the movement of cellulose synthase complexes in order to generate transverse microfibrils that are essential for elongation growth. Surprisingly, some recent studies demonstrate that organized cortical microtubules are not essential for maintaining or re-establishing transversely oriented cellulose microfibrils in expanding cells. At the same time, however, there is strong evidence that microtubules are intimately associated with cellulose synthesis activity, especially during secondary wall deposition. These apparently conflicting results provide important clues as to what microtubules do at the interface between the cell and its wall. I hypothesize that cellulose microfibril length is an important parameter of wall mechanics and suggest ways in which microtubule organization may influence microfibril length. This concept is in line with current evidence that links cellulose synthesis levels and microfibril orientation. Furthermore, in light of new evidence showing that a wide variety of proteins bind to microtubules, I raise the broader question of whether a major function of plant microtubules is in modulating signaling pathways as plants respond to sensory inputs from the environment.     

New techniques enable comparative analysis of microtubule orientation, wall texture, and growth rate in intact roots of Arabidopsis

This article explores root epidermal cell elongation and its dependence on two structural elements of cells, cortical microtubules and cellulose microfibrils. The recent identification of Arabidopsis morphology mutants with putative cell wall or cytoskeletal defects demands a procedure for examining and comparing wall architecture and microtubule organization patterns in this species. We developed methods to examine cellulose microfibrils by field emission scanning electron microscopy and microtubules by immunofluorescence in essentially intact roots. We were able to compare cellulose microfibril and microtubule alignment patterns at equivalent stages of cell expansion. Field emission scanning electron microscopy revealed that Arabidopsis root epidermal cells have typical dicot primary cell wall structure with prominent transverse cellulose microfibrils embedded in pectic substances. Our analysis showed that microtubules and microfibrils have similar orientation only during the initial phase of elongation growth. Microtubule patterns deviate from a predominantly transverse orientation while cells are still expanding, whereas cellulose microfibrils remain transverse until well after expansion finishes. We also observed microtubule-microfibril alignment discord before cells enter their elongation phase. This study and the new technology it presents provide a starting point for further investigations on the physical properties of cell walls and their mechanisms of assembly.     

beta-tubulin affects cellulose microfibril orientation in plant secondary fibre cell walls

Cellulose microfibrils are the major structural component of plant secondary cell walls. Their arrangement in plant primary cell walls, and its consequent influence on cell expansion and cellular morphology, is directed by cortical microtubules; cylindrical protein filaments composed of heterodimers of alpha- and beta-tubulin. In secondary cell walls of woody plant stems the orientation of cellulose microfibrils influences the strength and flexibility of wood, providing the physical support that has been instrumental in vascular plant colonization of the troposphere. Here we show that a Eucalyptus grandisbeta-tubulin gene (EgrTUB1) is involved in determining the orientation of cellulose microfibrils in plant secondary fibre cell walls. This finding is based on RNA expression studies in mature trees, where we identified and isolated EgrTUB1 as a candidate for association with wood-fibre formation, and on the analysis of somatically derived transgenic wood sectors in Eucalyptus. We show that cellulose microfibril angle (MFA) is correlated with EgrTUB1 expression, and that MFA was significantly altered as a consequence of stable transformation with EgrTUB1. Our findings present an important step towards the production of fibres with altered tensile strength, stiffness and elastic properties, and shed light on one of the molecular mechanisms that has enabled trees to dominate terrestrial ecosystems.     

Real-Time Imaging of Cellulose Reorientation during Cell Wall Expansion in Arabidopsis Roots

Cellulose forms the major load-bearing network of the plant cell wall, which simultaneously protects the cell and directs its growth. Although the process of cellulose synthesis has been observed, little is known about the behavior of cellulose in the wall after synthesis. Using Pontamine Fast Scarlet 4B, a dye that fluoresces preferentially in the presence of cellulose and has excitation and emission wavelengths suitable for confocal microscopy, we imaged the architecture and dynamics of cellulose in the cell walls of expanding root cells. We found that cellulose exists in Arabidopsis (Arabidopsis thaliana) cell walls in large fibrillar bundles that vary in orientation. During anisotropic wall expansion in wild-type plants, we observed that these cellulose bundles rotate in a transverse to longitudinal direction. We also found that cellulose organization is significantly altered in mutants lacking either a cellulose synthase subunit or two xyloglucan xylosyltransferase isoforms. Our results support a model in which cellulose is deposited transversely to accommodate longitudinal cell expansion and reoriented during expansion to generate a cell wall that is fortified against strain from any direction.The walls of growing plant cells must fulfill two simultaneous and seemingly contradictory requirements. First, they must expand to accommodate cell growth, which is anisotropic in many tissues and determines organ morphology. Second, they must maintain their structural integrity, both to constrain the turgor pressure that drives cell growth and to provide structural rigidity to the plant. These requirements are met by constructing primary cell walls that can expand along with growing cells, whereas secondary cell walls are deposited after cell growth has ceased and serve the latter function.One of the major constituents of both types of cell walls is cellulose, which exists as microfibrils composed of parallel β-1,4-linked glucan chains that are held together laterally by hydrogen bonds (Somerville, 2006). Microfibrils are 2 to 5 nm in diameter, can extend to several micrometers in length, and exhibit high tensile strength that allows cell walls to withstand turgor pressures of up to 1 MPa (Franks, 2003). In vascular plants, cellulose is synthesized by a multimeric cellulose synthase (CESA) complex composed of at least three types of glycosyl transferases arranged into a hexameric rosette (Somerville, 2006). After delivery to the plasma membrane, CESA initially moves in alignment with cortical microtubules (Paredez et al., 2006), but its trajectory can be maintained independently of microtubule orientation. For example, in older epidermal cells of the root elongation zone in Arabidopsis (Arabidopsis thaliana), cellulose microfibrils at the inner wall face are oriented transversely despite the fact that microtubules reorient from transverse to longitudinal along the elongation zone (Sugimoto et al., 2000), suggesting that microtubule orientation and cellulose deposition are independent in at least some cases.Depending on species, cell type, and developmental stage, cellulose microfibrils may be surrounded by additional networks of polymers, including hemicelluloses, pectins, lignin, and arabinogalactan proteins (Somerville et al., 2004). Hemicelluloses are composed of β-1,4-linked carbohydrate backbones with side branches and include xyloglucans, mannans, and arabinoxylans. Xyloglucan is thought to interact with the surface of cellulose and form cross-links between adjacent microfibrils (Vissenberg et al., 2005). In some cell types, pectin or lignin may also participate in cross-linking or entrapment of other cell wall polymers. It is unclear how the associations between networks of different cell wall components are relaxed to allow for cell wall expansion during growth.Several models have been proposed for the behavior of cell wall components during wall expansion. The passive reorientation hypothesis (also called the multinet growth hypothesis; Preston, 1982) postulates that in longitudinally expanding cells, cellulose microfibrils are synthesized in a transverse pattern and are then reoriented toward the longitudinal axis due to the strain generated by turgor pressure (Green, 1960). This phenomenon has been observed in the multicellular alga Nitella (Taiz, 1984). In higher plants, there is less direct evidence for passive reorientation, and another hypothesis holds that wall expansion involves active, local, and controlled remodeling of cellulose microfibrils along a diversity of orientations (Baskin, 2005). Such remodeling could be achieved by proteins such as xyloglucan endotransglycosylases (XETs), which break and rejoin xyloglucan chains, and expansins, which loosen cell walls in vitro in a pH-dependent manner (Cosgrove, 2005). Marga et al. measured cellulose microfibril orientation at the innermost layer of the cell wall before and after in vitro extension and did not observe reorientation (Marga et al., 2005). This suggests that processes other than microfibril reorientation might be involved in wall expansion, at least under certain circumstances or in some wall layers. Thus, the degree to which cellulose microfibrils are reoriented after their synthesis during wall expansion has remained unclear.One difficulty in resolving this problem has been the inability to directly image cellulose microfibrils in the growing cell wall. Existing methods to assess cellulose structure and orientation in plant cell walls are limited by the low contrast of cellulose in transmission electron microscopy, the ability to image only the surface of the wall using field emission scanning electron microscopy, and the use of polarized light microscopy in combination with dyes such as Congo red to measure only the bulk orientation of cellulose microfibrils (Baskin et al., 1999; Sugimoto et al., 2000; Verbelen and Kerstens, 2000; MacKinnon et al., 2006). In addition, the sample manipulation required for the former two methods has the potential to introduce artifacts (Marga et al., 2005). Although cellulose microfibril orientation differs at the inner and outer surfaces of the cell wall (Sugimoto et al., 2000) and presumably changes over time, the dynamics of cellulose reorientation during cell wall expansion have not been observed to date.In this study, we tested fluorescent dyes for their potential to allow imaging of cellulose distribution in the walls of Arabidopsis seedlings by confocal microscopy. We used one of these dyes to characterize the distribution of cellulose in wild-type root cells and in mutants with reduced cellulose or xyloglucan. By directly observing the fine structure of cellulose over time in growing wild-type root cells, we concluded that cellulose microfibrils in these cells reorient in a transverse to longitudinal direction as predicted by the passive reorientation hypothesis.     

Tracing cellulose microfibril orientation in inner primary cell walls

Summary By quantitative analysis of cellulose microfibril orientation at different levels in the primary cell wall of a number of cell types, the development of wall texture was studied. Meristematic, isodiametric and cylindrical parenchyma cells and cells of a suspension culture were used. Within the newly deposited microfibril population, various orientations were recognized on the micrographs. Within subpopulations the orientation of undercrossing and overcrossing microfibrils were measured. These measurements showed a gradual shift in cellulose microfibril orientation in the different levels. Microfibrils showed predominant orientations at particular levels but microfibrils of intermediate orientation also occurred, although at a much lower density. As cellulose microfibrils of intermediate orientation were not closely packed, lamellae were not formed. Interwoven microfibrils were occasionally present, indicating that differently orientated microfibrils are occasionally deposited simultaneously. Also gradual changes in orientation over the entire inner cell wall surface were observed. From these observations it was inferred that microfibril deposition occurs with a small but regular and progressive change in orientation, the rotational motion, related to that of a helicoidal system.Dedicated to Professor Dr. M. M. A. Sassen on the occasion of his 65th birthday     

Loss of function of COBRA, a determinant of oriented cell expansion, invokes cellular defence responses in Arabidopsis thaliana

An Arabidopsis T-DNA insertion mutant that results in complete loss-of-function of the COBRA gene has been identified. The COBRA gene encodes a putative glycosylphosphatidylinositol (GPI)-anchored protein that modulates cellulose deposition and oriented cell expansion in roots. The loss-of-function mutant allele (named "cob-5") exhibits abnormal cell growth throughout the entire plant body and accumulates massive amounts of stress response chemicals such as anthocyanins and callose. To gain further insight into the mechanism by which COBRA affects cell growth and physiology, the whole-genome gene expression profile of cob-5 plants was compared with that of wild-type plants. Consistent with the mutant phenotype, many genes involved in anthocyanin biosynthesis were up-regulated in the cob-5 plants, whereas genes involved in cell elongation were down-regulated. The most striking feature of the gene expression profile of cob-5 was the massive and co-ordinate induction of defence- and stress-related genes, many of which are regulated by the plant stress signal jasmonic acid (JA). Indeed, the cob-5 plants over-accumulated JA by nearly 8-fold compared with wild-type plants. Furthermore, induction of cell elongation defects in conditional allele cob-3 plants triggers the expression of a defence-responsive gene. These results provide potential clues to the mechanisms by which plant cells initially perceive biotic stress at the cell surface.     

Microfibrillar Structure, Cortical Microtubule Arrangement and the Effect of Amiprophos-methyl on Microfibril Orientation in the Thallus Cells of the Filamentous Green Alga, Chamaedoris orientalis

Microfibrillar structure, cortical microtubule orientation andthe effect of amiprophos-methyl (APM) on the arrangement ofthe most recently deposited cellulose microfibrils were investigatedin the marine filamentous green alga, Chamaedoris orientalis.The thallus cells of Chamaedoris showed typical tip growth.The orientation of microfibrils in the thick cell wall showedorderly change in longitudinal, transverse and oblique directionsin a polar dependent manner. Microtubules run parallel to thelongitudinally arranged microfibrils in the innermost layerof the wall but they are never parallel to either transverseor obliquely arranged microfibrils. The ordered change in microfibrilorientation is altered by the disruption of the microtubuleswith APM. The walls, deposited in the absence of the microtubules,showed typical helicoidal pattern. However, the original crossedpolylamellate pattern was restored by the removal of APM. Thissuggests that cortical microtubules in this alga do not controlthe direction of microfibril orientation but control the orderedchange of microfibril orientation. Amiprophos-methyl, Chamaedoris orientalis, coenocytic green alga, cortical microtubule, microfibrillar structure, tip growth     

Microfibrillar structure of growing cell wall in a coenocytic green alga,Boergesenia forbesii

A fine structure of cell wall lamellae in a coenocytic green algaBoergesenia forbesii was examined by electron microscopy. The wall has a polylamellate structure containing cellulose microfibrils 25 to 30 nm in diameter. The outer surface of the cell was covered by a thin structureless lamella, underneath which existed a lamella containing randomly-oriented microfibrils. The major part of the wall consisted of two types of lamellae, multifibrillar lamella and a transitional, matrix-rich one. In the former, microfibrils were densely arranged more or less parallel with each other. In the transitional lamella, existing between the multifibrillar ones, the microfibril orientation shifted about 30° within the layer. The fibril orientation also shifted 30° between adjacent transitional and multifibrillar layers, and consequently the microfibril orientation in the neighboring multifibrillar layers shifted 90°. It was concluded that the orientation rotated counterclockwise when observed from inside the cell. Each lamella in the thallus wall become thinner with cell expansion, but no reorientation of microfibrils in the outer old layers was observed. In the rhizoid, the outer lamellae sloughed off with the tip growth.     

Alteration of oriented deposition of cellulose microfibrils by mutation of a katanin-like microtubule-severing protein

It has long been hypothesized that cortical microtubules (MTs) control the orientation of cellulose microfibril deposition, but no mutants with alterations of MT orientation have been shown to affect this process. We have shown previously that in Arabidopsis, the fra2 mutation causes aberrant cortical MT orientation and reduced cell elongation, and the gene responsible for the fra2 mutation encodes a katanin-like protein. In this study, using field emission scanning electron microscopy, we found that the fra2 mutation altered the normal orientation of cellulose microfibrils in walls of expanding cells. Although cellulose microfibrils in walls of wild-type cells were oriented transversely along the elongation axis, cellulose microfibrils in walls of fra2 cells often formed bands and ran in different directions. The fra2 mutation also caused aberrant deposition of cellulose microfibrils in secondary walls of fiber cells. The aberrant orientation of cellulose microfibrils was shown to be correlated with disorganized cortical MTs in several cell types examined. In addition, the thickness of both primary and secondary cell walls was reduced significantly in the fra2 mutant. These results indicate that the katanin-like protein is essential for oriented cellulose microfibril deposition and normal cell wall biosynthesis. We further demonstrated that the Arabidopsis katanin-like protein possessed MT-severing activity in vitro; thus, it is an ortholog of animal katanin. We propose that the aberrant MT orientation caused by the mutation of katanin results in the distorted deposition of cellulose microfibrils, which in turn leads to a defect in cell elongation. These findings strongly support the hypothesis that cortical MTs regulate the oriented deposition of cellulose microfibrils that determines the direction of cell elongation.     

A survey of cellulose microfibril patterns in dividing,expanding, and differentiating cells of Arabidopsis thaliana

Cellulose microfibrils are critical for plant cell specialization and function. Recent advances in live cell imaging of fluorescently tagged cellulose synthases to track cellulose synthesis have greatly advanced our understanding of cellulose biosynthesis. Nevertheless, cellulose deposition patterns remain poorly described in many cell types, including those in the process of division or differentiation. In this study, we used field emission scanning electron microscopy analysis of cryo-planed tissues to determine the arrangement of cellulose microfibrils in various faces of cells undergoing cytokinesis or specialized development, including cell types in which cellulose cannot be imaged by conventional approaches. In dividing cells, we detected microfibrillar meshworks in the cell plates, consistent with the concentration at the cell plate of cellulose synthase complexes, as detected by fluorescently tagged CesA6. We also observed a loss of parallel cellulose microfibril orientation in walls of the mother cell during cytokinesis, which corresponded with the loss of fluorescently tagged cellulose synthase complexes from these surfaces. In recently formed guard cells, microfibrils were randomly organized and only formed a highly ordered circumferential pattern after pore formation. In pit fields, cellulose microfibrils were arranged in circular patterns around plasmodesmata. Microfibrils were random in most cotyledon cells except the epidermis and were parallel to the growth axis in trichomes. Deposition of cellulose microfibrils was spatially delineated in metaxylem and protoxylem cells of the inflorescence stem, supporting recent studies on microtubule exclusion mechanisms.     

Cellulose orientation determines mechanical anisotropy in onion epidermis cell walls

The role of cellulose microfibril orientation in determining cell wall mechanical anisotropy and in the control of the wall plastic versus elastic properties was studied in the adaxial epidermis of onion bulb scales using the constant-load (creep) test. The mean or net cellulose orientation in the outer periclinal wall of the epidermis was parallel to the long axis of the cells. In vitro cell wall extensibility was 30-90% higher in the direction perpendicular to the net microfibril orientation than parallel to it. This was the case for the size of the initial deformation occurring just after the load application and for the rate of time-dependent creep. Loading/unloading experiments confirmed the presence of a real irreversible component in cell wall extension. The plastic component of the time-dependent deformation was higher perpendicular to the net cellulose orientation than parallel to it. An acid buffer (pH 4.5) increased the creep rate by 25-30% but this response was not related to cellulose orientation. The present data provide direct evidence that the net orientation of cellulose microfibrils confers mechanical anisotropy to the walls of seed plants, a characteristic that may be relevant to understanding anisotropic cell growth.     

Cobtorin target analysis reveals that pectin functions in the deposition of cellulose microfibrils in parallel with cortical microtubules

Cellulose and pectin are major components of primary cell walls in plants, and it is believed that their mechanical properties are important for cell morphogenesis. It has been hypothesized that cortical microtubules guide the movement of cellulose microfibril synthase in a direction parallel with the microtubules, but the mechanism by which this alignment occurs remains unclear. We have previously identified cobtorin as an inhibitor that perturbs the parallel relationship between cortical microtubules and nascent cellulose microfibrils. In this study, we searched for the protein target of cobtorin, and we found that overexpression of pectin methylesterase and polygalacturonase suppressed the cobtorin-induced cell-swelling phenotype. Furthermore, treatment with polygalacturonase restored the deposition of cellulose microfibrils in the direction parallel with cortical microtubules, and cobtorin perturbed the distribution of methylated pectin. These results suggest that control over the properties of pectin is important for the deposition of cellulose microfibrils and/or the maintenance of their orientation parallel with the cortical microtubules.     

Mutant alleles of Arabidopsis RADIALLY SWOLLEN 4 and 7 reduce growth anisotropy without altering the transverse orientation of cortical microtubules or cellulose microfibrils

The anisotropic growth of plant cells depends on cell walls having anisotropic mechanical properties, which are hypothesized to arise from aligned cellulose microfibrils. To test this hypothesis and to identify genes involved in controlling plant shape, we isolated mutants in Arabidopsis thaliana in which the degree of anisotropic expansion of the root is reduced. We report here the characterization of mutants at two new loci, RADIALLY SWOLLEN 4 (RSW4) and RSW7. The radial swelling phenotype is temperature sensitive, being moderate (rsw7) or negligible (rsw4) at the permissive temperature, 19 degrees C, and pronounced at the restrictive temperature, 30 degrees C. After transfer to 30 degrees C, the primary root's elongation rate decreases and diameter increases, with all tissues swelling radially. Swelling is accompanied by ectopic cell production but swelling is not reduced when the extra cell production is eliminated chemically. A double mutant was generated, whose roots swell constitutively and more than either parent. Based on analytical determination of acid-insoluble glucose, the amount of cellulose was normal in rsw4 and slightly elevated in rsw7. The orientation of cortical microtubules was examined with immunofluorescence in whole mounts and in semi-thin plastic sections, and the orientation of microfibrils was examined with field-emission scanning electron microscopy and quantitative polarized-light microscopy. In the swollen regions of both mutants, cortical microtubules and cellulose microfibrils are neither depleted nor disoriented. Thus, oriented microtubules and microfibrils themselves are insufficient to limit radial expansion; to build a wall with high mechanical anisotropy, additional factors are required, supplied in part by RSW4 and RSW7.     

Effects of ethylene on the orientation of microtubules and cellulose microfibrils of pea epicotyl cells with polylamellate cell walls

Summary Following a 5 hours ethylene treatment, cortical cells of Pea (Pisum sativum L. var Alaska) epicotyl third internode showed a change in the orientation of both microtubules near the plasma membrane and recently deposited cellulose microfibrils. Control cortical cells had mostly transverse microtubules. The ratio of the average frequency of transverse to longitudinal microtubules was 6.0. After 5 hours of ethylene treatment, cortical cells had mostly longitudinal microtubules, with the ratio of transverse to longitudinal microtubules equal to 0.1. Epidermal cells were more variable than cortical cells with regard to the frequency of longitudinal and transverse microtubules. Observation of cortical cell walls in conventionally stained thin sections revealed that recent deposition of microfibrils had been primarily transverse in almost all of the control cortical cells sampled. In contrast, more than half of the ethylene-treated cortical cells had recent deposition oriented primarily longitudinally. This change in microtubule and microfibril orientation may be early enough to constitute the primary effect of ethylene leading to radial cell expansion.Research supported by NSF grant PCM 78-03244, A1, 2 to PBG and by a Research Corporation grant to WRE.     

How do cell walls regulate plant growth?

The cell wall of growing plant tissues has frequently been interpreted in terms of inextensible cellulose microfibrils 'tethered' by hemicellulose polymers attached to the microfibril surface by hydrogen bonds, with growth occurring when tethers are broken or 'peeled' off the microfibril surface by expansins. This has sometimes been described as the 'sticky network' model. In this paper, a number of theoretical difficulties with this model, and discrepancies between predicted behaviour and observations by a number of researchers, are noted. (i) Predictions of cell wall moduli, based upon the sticky network model, suggest that the cell wall should be much weaker than is observed. (ii) The maximum hydrogen bond energy between tethers and microfibrils is less than the work done in expansion and therefore breakage of such hydrogen bonds is unlikely to limit growth. (iii) Composites of bacterial cellulose with xyloglucan are weaker than pellicles of pure cellulose so that it seems unlikely that hemicelluloses bind the microfibrils together. (iv) Calcium chelators promote creep of plant material in a similar way to expansins. (v) Reduced relative 'permittivities' inhibit the contraction of cell wall material when an applied stress is decreased. Revisions of the sticky network model that might address these issues are considered, as are alternatives including a model of cell wall biophysics in which cell wall polymers act as 'scaffolds' to regulate the space available for microfibril movement. Experiments that support the latter hypothesis, by demonstrating that reducing cell wall free volume decreases extensibility, are briefly described.     

Cell wall biogenesis in Oocystis: experimental alteration of microfibril assembly and orientation.

Cell wall biogenesis in the unicellular green alga Oocystis apiculata has been studied. Under normal growth conditions, a cell wall with ordered microfibrils is synthesized. In each layer there are rows of parallel microfibrils. Layers are nearly perpendicular to each other. Terminal linear synthesizing complexes are located in the plasma membrane, and they are capable of bidirectional synthesis of cellulose microfibrils. Granule bands associated with the inner leaflet of the plasma membrane appear to control the orientation of newly synthesized microfibrils. Subcortical microtubules also are present during wall synthesis. Patterns of cell wall synthesis were studied after treatment with EDTA and EGTA as well as divalent cations (MgSO4, CaSO4, Cacl2). 0.1 M EDTA treatment for 15 min results in the disassociation of the terminal complexes from the ends of microfibrils. EDTA-treated cells followed by 15 min treatment with MgSO4 results in reaggregation of the linear complexes into a paired state, remote from the original ends to which they were associated. After 90 min treatment with MgSO4, normal synthesis resumes. EGTA and calcium salts do not affect the linear complexes or microfibril orientation. Treatments with colchicine and vinblastine sulphate do not depolymerize the microtubles, but the wall microfibril orientation is altered. With colchicine or vinblastine, the change in orientation from layer to layer is inhibited. The process is reversible upon removal of the drugs. Lumicolchicine has no effect upon microfibril orientation, but granule bands are disorganized. Treatment with coumarin, a known inhibitor of cellulose synthesis, causes the loss of visualization of subunits of the terminal complexes. The possibility of the existence of a membrane-associated colchicine-sensitive orientation protein for cellulose microfibrils is discussed. Transmembrane modulation of microfibril synthesis and orientation is presented.     

Disorganization of cortical microtubules stimulates tangential expansion and reduces the uniformity of cellulose microfibril alignment among cells in the root of Arabidopsis

To test the role of cortical microtubules in aligning cellulose microfibrils and controlling anisotropic expansion, we exposed Arabidopsis thaliana roots to moderate levels of the microtubule inhibitor, oryzalin. After 2 d of treatment, roots grow at approximately steady state. At that time, the spatial profiles of relative expansion rate in length and diameter were quantified, and roots were cryofixed, freeze-substituted, embedded in plastic, and sectioned. The angular distribution of microtubules as a function of distance from the tip was quantified from antitubulin immunofluorescence images. In alternate sections, the overall amount of alignment among microfibrils and their mean orientation as a function of position was quantified with polarized-light microscopy. The spatial profiles of relative expansion show that the drug affects relative elongation and tangential expansion rates independently. The microtubule distributions averaged to transverse in the growth zone for all treatments, but on oryzalin the distributions became broad, indicating poorly organized arrays. At a subcellular scale, cellulose microfibrils in oryzalin-treated roots were as well aligned as in controls; however, the mean alignment direction, while consistently transverse in the controls, was increasingly variable with oryzalin concentration, meaning that microfibril orientation in one location tended to differ from that of a neighboring location. This conclusion was confirmed by direct observations of microfibrils with field-emission scanning electron microscopy. Taken together, these results suggest that cortical microtubules ensure microfibrils are aligned consistently across the organ, thereby endowing the organ with a uniform mechanical structure.     

How do expansins control plant growth? A model for cell wall loosening via defect migration in cellulose microfibrils

Expansins are plant cell wall-loosening proteins that promote cell growth and are essential for many critical developmental processes and stress responses. The molecular basis for expansin action is uncertain. Recently, it has been proposed that expansins loosen the wall by means of the generation of mobile conformational defects at the surface of cellulose microfibrils. The present work addresses this hypothesis by elaborating three assumptions: (1) microfibril–matrix interfaces cause steep stress gradients on the microfibril surface, (2) stress gradients drive the motion of conformational defects along the microfibril surface toward the microfibril–matrix interfaces, and (3) the approach of the defects to the microfibril–matrix interfaces facilitates the dissociation of matrix polysaccharides from cellulose microfibrils.