The NAD domain and the predicted structure for aldolase: a word of caution.

The proposal of E. Stellwagen [(1976) J. Mol Biol., 106, 903–911] that the structure of a protein can be predicted by sequence analysis provided that the protein specifically binds Cibacron blue F3GA, is not sound at least for muscle fructose bisphosphate aldolase. Contrary to the predictions we have shown that Cibacron blue does not interact directly with lysine 227 at the catalytic sites but with different sites which bind also ATP and fructose bisphosphate. We have shown also that aldolase binds 3.5 molecules of dye per subunit (dissociation constant 1.9 μm), too great a number to support the hypothesis that the binding of Cibacron blue is a specific indication of the presence of an NAD domain.     

Effect of Cibacron Blue F3GA on phosphoglycerate kinase of Lactobacillus plantarum and phosphoglycerate mutase of Leuconostoc dextranicum

Blue dextran or Cibacron Blue F3GA has been shown to inhibit yeast phosphoglycerate kinase [EC 2.7.2.3] competitively with respect to ATP (Thompson et al. (1975) Proc. Natl. Acad. Sci. U.S. 72, 663--667; Beissner and Rudolph (1979) J. Biol. Chem. 254, 6273--6277). However, we have found that phosphoglycerate kinase of Lactobacillus plantarum was inhibited by Cibacron Blue F3GA, the blue chromophore of blue dextran, noncompetitively with respect to ATP, but competitively with respect to 3-phosphoglycerate. Further inhibition studies with Cibacron Blue F3GA suggest that one molecule of the dye was bound per molecule of phosphoglycerate kinase at a saturated level of either substrate, but two molecules of the dye were bound per molecule of the kinase with an unsaturated level of either substrate used as a fixed substrate. Furthermore, phosphoglycerate mutase [EC 2.7.5.3] of Leuconostoc dextranicum was also inhibited by Cibacron Blue F3GA competitively with respect to 3-phosphoglycerate and noncompetitively with respect to 2,3-bisphosphoglycerate. These results suggest that the 3-phosphoglycerate-binding site on both phosphoglycerate kinase and phosphoglycerate mutase can interact with Cibacron Blue F3GA.     

Investigation into the use of graft copolymer-based cibacron blue F3GA columns for the purification of proteins

The graft copolymers Nylon-co-hydroxyethylmethacrylate and poly(ethylene)-co-hydroxyethylmethacrylate coupled to Cibacron blue F3GA at wet volume levels similar to those obtained with Sepharose 4B. However, the graft copolymers removed protein from human serum to a far lesser extent than did Sepharose 4B. Further investigations involved the preparation of hydrolyzed poly(vinyl acetate) copolymers of nylon and polyethylene and of cellulose-co-hydroxyethylmethacrylate and study of the ability of the copolymers to remove human serum albumin and lactic dehydrogenase. Comparisons were made with Sepharose 4B-, Sephadex G15-, and G25-based Cibacron blue F3GA systems. The effectiveness of Sepharose 4B-Cibacron blue F3GA is thought to be due to the manner in which the dye is located within the pores of the gel.     

Binding of Cibacron Blue F3GA to flavocytochrome b2 from baker's yeast.

1. Flavin-free cytochrome b2 has been prepared by rapid Sephadex filtration at acid pH. The method, which yields an apo-enzyme with high reconstitution potential and has several advantages over previously used procedures, is described in detail. 2. Flavin-free cytochrome b2 thus prepared is retained by blue-dextran-bound Sepharose. It can be eluted by an increase in ionic strength, by dilute ethylene glycol and specifically by low concentrations of FMN. The holoenzyme is not retarded at all. 3. Both flavin-free and holocytochrome b2 bind Cibacron blue F3GA with appearance of distinct difference spectra. Cibacron blue is an inhibitor for the holoenzyme, it shows mixed type inhibition with respect to lactate. 4. It is concluded that there are two types of binding sites for Cibacron blue F3GA on flavocytochrome b2. Both possess ionic and hydrophobic character; one of them, which is the flavin binding site, is only available in the absence of the cofactor. Taken together these results may mean that the enzyme possesses a local flavin-binding structure similar to the 'dinucleotide fold'.     

Studies of the acetyl-CoA-binding site of rat liver spermidine/spermine N1-acetyltransferase.

Rat liver spermidine/spermine N1-acetyltransferase was found to be strongly inhibited by the dyes Cibacron F3GA, Coomassie Brilliant Blue and Congo Red. Inhibition was competitive with respect to acetyl-CoA and Ki values of 0.7 microM and 52 microM were determined for Cibacron F3GA and Coomassie Brilliant Blue respectively. The enzyme was strongly retained by columns of Affi-Gel Blue, which contains Cibacron F3GA linked to agarose. It was not eluted from this adsorbent in the presence of 10 mM-spermidine/0.5 M-NaCl/50 mM-Tris/HCl, pH 7.5, but was released by 1 mM-CoA in 10 mM-spermidine/50 mM-Tris/HCl, pH 7.5. These results are consistent with the presence in the enzyme of a dinucleotide fold that binds acetyl CoA and has a high affinity for Cibacron F3GA. The spermidine/spermine N1-acetyltransferase was irreversibly inactivated by exposure to butane-2,3-dione in sodium borate, pH 7.8, or by exposure to phenylglyoxal or camphorquinone-10-sulphonic acid. All of these reagents are known to interact with arginine residues in proteins under the conditions in which they inactivated the acetyltransferase. Inactivation was prevented by the presence of acetyl-CoA or CoA, but to a lesser extent by 3'-dephospho-CoA and not at all by NAD or adenosine. This protection suggests that an arginine residue at the active site is involved in the binding of the acetyl-CoA substrate. Treatment of the assay mixture but not the spermidine N1-acetyltransferase with alkaline phosphatase prevented the reaction taking place. This suggests that the apparent loss of enzyme activity in response to alkaline phosphatase reported by Matsui, Otani, Kamei & Morisawa [(1982) FEBS Lett. 150, 211-213] is due to dephosphorylation of the acetyl-CoA substrate and that the 3'-phosphate group is essential for activity.     

A differential scanning calorimetric study of the binding of sulfate ion and of Cibacron blue F3GA to yeast phosphoglycerate kinase

In continuation of earlier work [Hu, C. Q., & Sturtevant, J.M. (1987) Biochemistry 26, 178-182], differential scanning calorimetry has been employed in a study of the effects on the thermal denaturation of yeast phosphoglycerate kinase of two inhibitors of the enzyme, sulfate ion and the dye Cibracron blue F3GA. Sulfate ion, as is usual with ligands that dissociate during unfolding of the host protein, raises t1/2, the temperature of half-completion of the denaturation, has only a modest effect, stemming from the enthalpy of dissociation of the ligand, on the enthalpy of denaturation, and has little or no effect on the heat capacity change resulting from denaturation. In sharp contrast, Cibacron blue F3GA lowers t1/2 and drastically decreases both the enthalpy and heat capacity changes due to denaturation. The DSC results with sulfate ion are consistent with previous kinetic data [Scopes, R. K. (1978) Eur. J. Biochem. 91, 119-129; Khamis, M. H., & Larsson-Raznikiewicz, M. (1981) Biochim. Biophys. Acta 657, 190-194], which indicate two binding sites for sulfate ion at one of which the ligand acts as a competitive inhibitor. The results with Cibacron blue F3GA indicate that the dye induces a major destabilizing structural change in the enzyme in addition to rendering it enzymically inactive.     

Human serum albumin chromatography by Cibacron Blue F3GA-derived microporous polyamide hollow-fiber affinity membranes

An affinity dye ligand, Cibacron Blue F3GA was covalently attached onto commercially available microporous polyamide hollow-fibre membranes for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. Different amounts of Cibacron Blue F3GA were incorporated on the polyamide hollow-fibres by changing the dye attachment conditions, i.e. initial dye concentration, addition of sodium carbonate and sodium chloride. The maximum amount of Cibacron Blue F3GA attachment was obtained at 42.5 μmol g⁻¹ when the hollow-fibres were treated with 3 M HCl for 30 min before performing the dye attachment. HSA adsorption onto unmodified and Cibacron Blue F3GA-derived polyamide hollow-fibre membranes was investigated batchwise. The non-specific adsorption of HSA was very low (6.0 mg g⁻¹ hollow-fibre). Cibacron Blue F3GA attachment onto the hollow-fibres significantly increased the HSA adsorption (147 mg g⁻¹ hollow-fibre). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (230 mg HSA g⁻¹ hollow-fibre). Desorption of HSA from Cibacron Blue F3GA derived hollow-fibres was obtained using 0.1 M Tris–HCl buffer containing 0.5 M NaSCN or 1.0 M NaCl. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to reuse Cibacron Blue F3GA derived polyamide hollow-fibre without significant decreases in the adsorption capacities.     

Cadmium removal from human plasma by Cibacron Blue F3GA and thionein incorporated into polymeric microspheres

Poly(2-hydroxyethylmethacrylate–ethyleneglycoldimethacrylate) [poly(HEMA–EGDMA)] microspheres carrying Cibacron Blue F3GA and/or thionein were prepared and used for the removal of cadmium ions Cd(II) from human plasma. The poly(HEMA–EGDMA) microspheres, in the size range of 150–200 μm in diameter, were produced by a modified suspension copolymerization of HEMA and EGDMA. The reactive triazinyl dye-ligand Cibacron Blue F3GA was then covalently incorporated into the microspheres. The maximum dye incorporation was 16.5 μmol/g. Then, thionein was bound onto the Cibacron Blue F3GA-incorporated microspheres under different conditions. The maximum amount of thionein bound was 14.3 mg/g. The maximum amounts of Cd(II) ions removed from human plasma by poly(HEMA–EGDMA)–Cibacron Blue F3GA and poly(HEMA–EGDMA)–Cibacron Blue F3GA–thionein were of 17.5 mg/g and 38.0 mg/g, respectively. Cd(II) ions could be repeatedly adsorbed and desorbed with both types of microspheres without significant loss in their adsorption capacity.     

Difference spectroscopic studies on binding of Cibacron blue F3GA to ribosome inactivating proteins: Effect of β-mercaptoethanol on the interaction with ricin

The interaction of Cibacron blue F3GA with ribosome inactivating proteins, ricin, ricin A-chain and momordin has been investigated using difference absorption spectroscopy. Ricin was found to bind the dye with a 20- and 2-fold lower affinity than ricin A-chain and momordin, respectively. A time dependent increase in the amplitude of Cibacron blue difference spectrum in the presence of ricin was observed on addition of β-mercaptoethanol. Analysis of the kinetic profile of this increase showed a biphasic phenomenon and the observed rates were found to be independent of the concentration of β-mercaptoethanol. Kinetics of reduction of the intersubunit disulphide bond in ricin by β-mercaptoethanol showed that reductionper se is a second order reaction. Therefore, the observed changes in the difference spectra of Cibacron blue probably indicate a slow change in the conformation of ricin, triggered by reduction of the intersubunit disulphide bond.     

Hazards in the use of Cibacron Blue F3GA in studies of proteins.

Cibacron Blue F3GA from several commercial sources is shown to be heterogeneous. This crude dye inactivates both phosphoglycerate kinase and isoleucyl-tRNA synthetase. Purification of Cibacron Blue F3GA to homogeneity results in a dramatic decrease in inactivation of these enzymes. The inactivation is shown to be due to covalent modification of phosphoglycerate kinase and probably isoleucyl-tRNA synthetase by a minor component present in crude Cibacron Blue F3GA.     

Analysis of nucleoside-binding proteins by ligand-specific elution from dye resin: application to Mycobacterium tuberculosis aldehyde dehydrogenases

We show that Cibacron Blue F3GA dye resin chromatography can be used to identify ligands that specifically interact with proteins from Mycobacterium tuberculosis, and that the identification of these ligands can facilitate structure determination by enhancing the quality of crystals. Four native Mtb proteins of the aldehyde dehydrogenase (ALDH) family were previously shown to be specifically eluted from a Cibacron Blue F3GA dye resin with nucleosides. In this study we characterized the nucleoside-binding specificity of one of these ALDH isozymes (recombinant Mtb Rv0223c) and compared these biochemical results with co-crystallization experiments with different Rv0223c-nucleoside pairings. We found that the strongly interacting ligands (NAD and NADH) aided formation of high-quality crystals, permitting solution of the first Mtb ALDH (Rv0223c) structure. Other nucleoside ligands (AMP, FAD, adenosine, GTP and NADP) exhibited weaker binding to Rv0223c, and produced co-crystals diffracting to lower resolution. Difference electron density maps based on crystals of Rv0223c with various nucleoside ligands show most share the binding site where the natural ligand NAD binds. From the high degree of similarity of sequence and structure compared to human mitochondrial ALDH-2 (BLAST Z-score = 53.5 and RMSD = 1.5 Å), Rv0223c appears to belong to the ALDH-2 class. An altered oligomerization domain in the Rv0223c structure seems to keep this protein as monomer whereas native human ALDH-2 is a multimer.     

Development of the magnetic beads for dye ligand affinity chromatography and application to magnetically stabilized fluidized bed system

Magnetic poly(2-hydroxyethylmethacrylate) [mPHEMA] beads were prepared by suspension polymerization of HEMA in the presence of Fe₃O₄ nano-powder. Cibacron Blue F3GA was covalently immobilized to the mPHEMA beads via nucleophilic substitution reaction between chloride of its triazine ring and hydroxyl groups of HEMA under alkaline conditions. The mPHEMA/Cibacron Blue F3GA beads (100–140 μm in diameter) carrying 68.3 μmol Cibacron Blue F3GA per gram polymer were used for β-casein adsorption studies. Adsorption studies were performed under different conditions in a batch system (i.e., pH, β-casein initial concentration, temperature, and ionic strength) and then in a magnetically stabilized fluidized bed (MSFB) system. The swelling ratio of the mPHEMA was 62.1%. The maximum adsorption capacity for batch system was 20.2% lower as compared to the value obtained in MSFB. The mPHEMA/Cibacron Blue F3GA beads could be repeatedly applied for β-casein adsorption without significant losses in the adsorption capacity.     

Donkey and horse alpha 1 B-glycoprotein: partial characterization and new alleles.

1. The donkey postalbumin protein has been shown to be the equivalent of human alpha 1 B-glycoprotein by protein immunoblotting and N-terminal amino acid sequence. 2. The horse A1B system (already identified as the homologue of human alpha 1 B-glycoprotein) and the donkey alpha 1 B-glycoprotein were characterized further for terminal sialic acid content, isoelectric point, amino acid composition and affinity for the dye-ligand, Cibacron Blue F3GA (known to bind human alpha 1 B-glycoprotein). 3. Two new alleles in the horse A1B system were found, bringing the total number of alleles to five. No polymorphism was found in the donkey alpha 1 B system. 4. As expected the first 20 N-terminal residues of the donkey and horse proteins are highly conserved with only two differences being found. 5. The polymorphism of the horse alpha 1 B-glycoproteins may be due in part to differing numbers of terminal sialic acid residues and the higher electrophoretic mobility of the donkey alpha 1 B-glycoprotein may be due in part to increased sialylation. 6. The horse and donkey alpha 1 B-glycoproteins exhibited differences in affinity for the dye-ligand, Cibacron Blue F3GA, with the donkey alpha 1 B-glycoprotein not being bound.     

Purification and specificity of RNase A3 from Vicia faba root cells

Vicia faba root ribonucleases are bound to Cibacron blue F3GA. A Blue dextran-Sepharose column was used to purify RNase A₃, the more abundant enzyme from V. faba root. Using dinucleoside monophosphate as substrates, it appears that this enzyme behaves as a cyclizing phosphotransferase. With high enzyme/substrate ratios on prolonged digestion a partial release of a nucleoside 3′ phosphate occurs. The specificity is relatively high since only the purine-purine phosphodiester linkages out of 16 types of possible links are easily cleaved. When a pyrimidine is involved in the phosphodiester bond, a much slower rate of attack (Py in 5′) or no attack (Py in 3′) was detected.     

Purification of immunotoxins containing ricin A-chain and abrin A-chain using Blue Sepharose CL-6B

We describe a method for separating antibody from immunotoxins by affinity chromatography on Cibacron blue F3GA coupled to Sepharose (Blue Sepharose). The antibody did not bind to the gel. The immunotoxins were bound by their ricin A-chain or abrin A-chain moiety and could be recovered in high yield and purity using mild elution conditions. The method is suitable for the large-scale purification of immunotoxins.     

Affinity and hydrophobic chromatography of Escherichia coli aspartate transcarbamoylase

Chromatography of aspartate transcarbamoylase from Escherichia coli on agarose-immobilized dyes and alkyl-agaroses of differing carbon length were investigated. The bacterial aspartate transcarbamoylase was bound by Procoin red HE3B-agarose and Cibacron blue F3GA-agarose nearly completely under the conditions chosen relative to other agarose-coupled dyes. The aspartate transcarbamoylase holoenzyme was eluted from the Procion red HE3B-agarose slightly later than from the Cibacron blue F3GA-agarose during salt gradient elution. The catalytic trimer of the enzyme as well as its regulatory dimer were eluted by a lower salt concentration from both dye-agarose gels than the concentration required to elute the haloenzyme. The interaction of the catalytic trimer with the Procion red HE3B-agarose and Cibacron blue F3GA-agarose gels may be a determinant in the holoenzyme being retained on these resins. Of those alkyl-agaroses tested, the ethyl-, propyl- and hexyl-agarose gels bound the majority of aspartate transcarbamoylase activity. Chromatography of aspartate transcarbamoylase on ethyl-agarose found it to be eluted by a low salt concentration. A purification scheme for relatively small amounts of aspartate transcarbamoylase utilizing Procion red HE3B-agarose and ethyl-agarose is presented. This purification scheme is particularly useful for mutant versions of aspartate transcarbamoylase which cannot be purified by literature procedures.     

Use of Cibacron blue F 3GA-CL-sepharose 6B for the purification of T4 DNA- and RNA-ligases

The sorption capacity of the dye cibacron blue F3GA, immobilized on CL-Sepharose 6B and other support matrices, in respect to DNA- and RNA-ligases T4 was being studies. Cibacron blue F3GA immobilized on CL-Sepharose 6B binds a three-fold amount of DNA-ligase in comparison to RNA-ligase. The enzyme chromatography on cibbacron blue F3GA-CL-Sepharose 6B revealed a stronger linkage between DNA-ligase T4 and the sorbent than between RNA-ligase T4 and the sorbent. Elution was performed with potassium chloride. DNA-ligase T4 was eluted with 0.25-0.5 M KCl and RNA-ligase T4 with 0.08-0.18 M KCl. Since deoxyexonuclease contaminants possess stronger bonds with the sorbent than ligases, elution of deoxyexonucleases occurs at higher concentrations of KCl. Chromatography of enzymes on cibacron blue F3GA-CL-Sepharose 6B allows one to obtain DNA- and RNA-ligases essentially free of DNase and RNase contaminants.     

Modifications of Sulfhydryl Groups on Phytochrome and Their Influence on Physicochemical Differences between the Red- and Far-Red-Absorbing Forms

Phytochrome extracted from shoots of dark-grown rye (Secale cereale cv Rymin) and oat (Avena sativa cv Garry) as the far-red-form (Pfr) and/or under conditions conducive to oxidation exhibited a blue shift in the visible absorption maximum of its red-light-absorbing form (Pr) relative to that measured in vivo. This spectral alteration could not be reversed but could be prevented by inclusion of 10 millimolar diethyldithiocarbamate and 140 millimolar 2-mercaptoethanol in homogenization buffers. Similar blue shifts were induced in purified rye phytochrome by addition of the sulfhydryl-modifying reagent, 5,5′-dithiobis-(2-nitrobenzoic acid) (DTNB). In spectrally normal phytochrome (i.e., no detectable blue shift), Pfr had three to four more sulfhydryls available for rapid reaction with DTNB than did Pr. This difference was maintained over a 2.5-hour time course. Phytochrome purified under conditions resulting in a blue-shifted Pr absorption maximum exhibited a decreased short-term reactivity of Pfr to DTNB. Comparison of the binding and elution of altered and unaltered phytochrome from agarose-immobilized Cibacron blue 3GA confirmed that the Pfr form of spectrally normal phytochrome had a greater affinity for the dye than did the Pr form but that spectral alteration of phytochrome was accompanied by a loss of this difference as evidenced by an increased binding of Pr to the dye. It was concluded that phytochrome has highly reactive sulfhydryl residues located on the portion of the protein that undergoes conformational changes on interconversion of Pr and Pfr and that these residues require rigorous protection in order to extract the native form of the protein from plant tissue.     

New sorbent for bilirubin removal from human plasma: Cibacron Blue F3GA-immobilized poly(EGDMA–HEMA) microbeads

Cibacron Blue F3GA-immobilized poly(EGDMA–HEMA) microbeads were investigated as a specific sorbent for bilirubin removal from human plasma. The poly(EGDMA–HEMA) microbeads were prepared by a modified suspension copolymerization technique. Cibacron Blue F3GA was covalently coupled to the poly(EGDMA–HEMA) microbeads via the nucleophilic reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA molecule, under alkaline conditions. Bilirubin adsorption was investigated from hyperbilirubinemic human plasma on the poly(EGDMA–HEMA) microbeads containing different amounts of immobilized Cibacron Blue F3GA, (between 5.0–16.5 μmol/g). The non-specific bilirubin adsorption on the unmodified poly(EGDMA–HEMA) microbeads were 0.32 mg/g from human plasma. Higher bilirubin adsorption values, up to 14.8 mg/g, were obtained with the Cibacron Blue F3GA-immobilized microbeads. Bilirubin molecules interacted with these sorbents directly. Contribution of albumin adsorption on the bilirubin adsorption was pronounced. Bilirubin adsorption increased with increasing temperature.     

Separation of polypeptide chains of ricin and the interaction of the A chain with Cibacron Blue F3GA

From ricin bound to the galactomannan guar gum in a column, the nonbinding toxic A chain could be eluted by reduction with 2-mercaptoethanol and later the B chain by lactose. The presence of a nucleotide-binding domain on the toxic chain A could be demonstrated from its interaction with the blue dye Cibacron Blue F3GA.