Solution structure of a novel calcium binding protein, MTH1880, from Methanobacterium thermoautotrophicum

MTH1880 is a hypothetical protein from Methanobacterium thermoautotrophicum, a target organism of structural genomics. The solution structure determined by NMR spectroscopy demonstrates a typical alpha + beta-fold found in many proteins with different functions. The molecular surface of the protein reveals a small, highly acidic pocket comprising loop B (Asp36, Asp37, Asp38), the end of beta2 (Glu39), and loop D (Ser57, Ser58, Ser61), indicating that the protein would have a possible cation binding site. The NMR resonances of several amino acids within the acidic binding pocket in MTH1880, shifted upon addition of calcium ion. This calcium binding motif and overall topology of MTH1880 differ from those of other calcium binding proteins. MTH1880 did not show a calcium-induced conformational change typical of calcium sensor proteins. Therefore, we propose that the MTH1880 protein contains a novel motif for calcium-specific binding, and may function as a calcium buffering protein.     

The crystal structure of hypothetical protein MTH1491 from Methanobacterium thermoautotrophicum

As part of our structural proteomics initiative, we have determined the crystal structure of MTH1491, a previously uncharacterized hypothetical protein from Methanobacterium thermoautotrophicum. MTH1491 is one of numerous structural genomics targets selected in a genome-wide survey of uncharacterized proteins. It belongs to a family of proteins whose biological function is not known. The crystal structure of MTH1491, the first structure for this family of proteins, consists of an overall five-stranded parallel beta-sheet with strand order 51234 and flanking helices. The oligomeric form of this molecule is a trimer as seen from both crystal contacts and gel filtration studies. Analysis revealed that the structure of MTH1491 is similar to that of dehydrogenases, amidohydrolases, and oxidoreductases. Using a combination of sequence and structural analyses, we showed that MTH1491 does not belong to either the dehydrogenase or the amidohydrolase superfamilies of proteins.     

Solution structure of ribosomal protein S28E from Methanobacterium thermoautotrophicum

The ribosomal protein S28E from the archaeon Methanobacterium thermoautotrophicum is a component of the 30S ribosomal subunit. Sequence homologs of S28E are found only in archaea and eukaryotes. Here we report the three-dimensional solution structure of S28E by NMR spectroscopy. S28E contains a globular region and a long C-terminal tail protruding from the core. The globular region consists of four antiparallel beta-strands that are arranged in a Greek-key topology. Unique features of S28E include an extended loop L2-3 that folds back onto the protein and a 12-residue charged C-terminal tail with no regular secondary structure and greater flexibility relative to the rest of the protein. The structural and surface resemblance to OB-fold family of proteins and the presence of highly conserved basic residues suggest that S28E may bind to RNA. A broad positively charged surface extending over one side of the beta-barrel and into the flexible C terminus may present a putative binding site for RNA.     

Isolation of lipid activated pseudomurein precursors from Methanobacterium thermoautotrophicum

From cell extracts of the pseudomurein possessing methanogen Methanobacterium thermoautotrophicum two putative pseudomurein precursors were isolated and characterized: (1) an undecaprenyl pyrophosphate activated disaccharide pentapeptide composed of N-acetylglucosamine, N-acetyltalosaminuronic acid, alanine, glutamic acid and lysine in a molar ratio of 1:1:2:2:1 and (2) the corresponding undecaprenyl pyrophosphate activated tetrapeptide lacking one alanine residue. The isolation of these precursors show that the biosynthesis of the eubacterial murein and the methano-bacterial pseudomurein differs not only in the cytoplasmic step, as recently described, but also in the lipid stage.Abbreviations GlcNitol glucosaminitol - NAcTalNUA N-acetyltalosaminuronic acid - Udp undecaprenol - TLC thin layer chromatography     

Nickel,a component of factor F 430 from Methanobacterium thermoautotrophicum

Methanobacterium thermoautotrophicum, growing on medium supplemented with 2 mol ⁶³NiCl₂/l, was found to take up 1.2 mol ⁶³Ni per g cells (dry weight). More than 70% of the radioisotope was incorporated into a compound, which dissociated from the protein fraction after heat treatment, was soluble in 70% acetone, and could be purified by chromatography on QAE-Sephadex A-25, Sephadex G-25, and DEAE cellulose. The purified ⁶³Ni labelled compound had an absorption spectrum and properties identical to those of factor F ₄₃₀ and is therefore considered to be identical with factor F ₄₃₀.Factor F ₄₃₀, a compound of molecular weight higher than 1000 with an absorbance maximum at 430 nm, has recently been purified from Methanobacterium thermoautotrophicum (Gunsalus and Wolfe, 1978). The structure and function of this compound are not yet known.     

The membrane potential in whole cells of Methanobacterium thermoautotrophicum

of whole cells of Methanobacterium thermoautotrophicum was estimated under varying conditions using an electrode sensitive to the lipophilic cation tetraphenylphosphonium chloride (TPP⁺). Since was found to be extremely sensitive to air, a special reaction vessel was developed to maintain strict anaerobiosis. The cells took up TPP⁺ under energization by H₂ and CO₂ thus allowing to calculate the from the distribution of TPP⁺ inside and outside the cells. The unspecific uptake of deenergized cells was around 10% of the total uptake of energized cells. TPP⁺ itself slightly diminished the , but had no effect on the formation of methane. Typical values of were in the range of-150 to-200 mV. showed a quantitative dependence on both the electron donor H₂ and the electron acceptor CO₂. NaCl stimulated the extent of the , whereas KCl slightly diminished it. Valinomycin resulted in a linear decline of , whereas the methane production rate was only slightly affected. In contrast, monensin reduced both methanogenesis and .Abbreviations pmf proton motive force - membrane potential - TPP⁺ tetraphenylphosphonium (chloride salt) - TPMP⁺ triphenylmethylphosphonium (chloride salt, if not otherwise indicated) - d.w. dry weight - t _d doubling time - PVC polyvinylchloride     

The amino acid sequence of the peptide moiety of the pseudomurein from Methanobacterium thermoautotrophicum

The amino acid sequence of the peptide subunits of the peptide moiety of the sacculus polymer (pseudomurein) of Methanobacterium thermoautotrophicum was elucidated by analysing overlapping peptides obtained from partial acid hydrolysates of isolated sacculi. It is suggested that the peptide subunits are attached to glycan strands via one of their glutamyl residues. Another glutamyl residue may crosslink two adjacent peptide subunits to form a dimer. The calculated molar ratios of the amino acids and the percentages of the N-or C-terminal amino acid residues of the supposed dimers are compatible with those actually found in the sacculus polymer.     

Immunocytochemical localization of methyl-coenzyme M reductase in Methanobacterium thermoautotrophicum

Cells of Methanobacterium thermoautotrophicum were fixed with glutaraldehyde, sectioned and labeled with antibodies against the subunit of component C (=methyl-CoM reductase) of methyl-CoM reductase system and with colloidal gold-labeled protein A. It was found that the gold particles were located predominantly in the vicinity of the cytoplasmic membrane, when the cells were grown under conditions where methyl-CoM reductase was not overproduced. This finding confirms the recent data obtained with Methanococcus voltae showing via the same immunocytochemical localization technique that in this organism methyl-CoM reductase is membrane associated.     

Sodium dependence of growth and methane formation in Methanobacterium thermoautotrophicum

Methanobacterium thermoautotrophicum was found to require sodium for growth and for CO₂ reduction to methane. The dependence of the rate of growth and methane formation on the sodium concentration was hyperbolic with an apparent K _s for sodium of approximately 1 mM. The findings indicate that sodium has a specific function in the energy metabolism of this bacterium.     

Physical and genetic map of the Methanobacterium wolfei genome and its comparison with the updated genomic map of Methanobacterium thermoautotrophicum Marburg

A physical and genetic map of the chromosome of Methanobacterium wolfei was constructed by using pulsed-field gel electrophoresis of restriction fragments generated by digestion with NotI and NheI. The chromosome was found to be circular and 1,729 kb in size. Twenty-eight genes were mapped to specific restriction enzyme fragments by performing hybridization experiments with gene probes from various Methanobacterium strains. The genomic map obtained was compared with the updated genomic map of Methanobacterium thermoautotrophicum Marburg. In spite of major restriction pattern dissimilarities, the overall genetic organization seemed to be conserved between the genomes of the two strains. In addition, the two rRNA operons of strain Marburg were precisely mapped on the chromosome, and it was shown that they are transcribed in the same direction.     

Tungstate can substitute for molybdate in sustaining growth of Methanobacterium thermoautotrophicum

Methanobacterium thermoautotrophicum (strain Marburg) was found to grow on media supplemented with tungstate rather than with molybdate. The Archaeon then synthesized a tungsten iron-sulfur isoenzyme of formylmethanofuran dehydrogenase. The isoenzyme was purified to apparent homogeneity and shown to be composed of four different subunits of apparent molecular masses 65 kDa, 53 kDa, 31 kDa, and 15 kDa and to contain per mol 0.4 mol tungsten, <0.05 mol molybdenum, 8 mol non-heme iron, 8 mol acid-labile sulfur and molybdopterin guanine dinucleotide. Its molecular and catalytic properties were significantly different from those of the molybdenum isoenzyme characterized previously. The two isoenzymes also differed in their metal specificity: the active molybdenum isoenzyme was only synthesized when molybdenum was available during growth whereas the active tungsten isoenzyme was also generated during growth of the cells on molybdate medium. Under the latter conditions the tungsten isoenzyme was synthesized containing molybdenum rather than tungsten.Abbreviations MFR methanofuran - CHO-MFR N-formylmethanofuran - MGD molybdopterin guanine dinucleotide - MAD molybdopterin adenine dinucleotide - MHD molybdopterin hypoxanthine dinucleotide - FPLC fast protein liquid chromatography - SDS/PAGE sodium dodecylsulfate/polyacrylamide gel electrophoresis - ICP-MS inductively coupled plasma mass spectrometry     

Nutrition and factors limiting the growth of a methanogenic bacterium (Methanobacterium thermoautotrophicum)

The purification of Methanobacterium thermoautotrophicum from a culture contaminated with a heterotrophic organism is described. A defined inorganic medium under H₂/CO₂ (80:20 v/v) has been developed to support growth of M. thermoautotrophicum up to a concentration of at least 1.7 g dry weight/l. In a conventional medium iron and nitrogen sources were found to be growth-limiting factors. Throughout most of the culture period the rate of transfer of hydrogen or carbon dioxide from gas to liquid was the factor which controlled the growth rate.The growth yields of bacteria were in the range 0.6–1.6 g dry weight/mole CH₄.Abbreviation TGP thioglycollate peptone medium     

Nickel,cobalt, and molybdenum requirement for growth of Methanobacterium thermoautotrophicum

Growth of Methanobacterium thermoautotrophicum on H₂ and CO₂ as sole energy and carbon sources was found to be dependent on Ni, Co, and Mo. At low concentrations of Ni (<100 nM), Co (<10 nM) and Mo (<10 nM) the amount of cells formed was roughly proportional to the amount of transition metal added to the medium; for the formation of 1 g cells (dry weight) approximately 150 nmol NiCl₂, 20 nmol CoCl₂ and 20 nmol Na₂MoO₄ were required. A dependence of growth on Cu, Mn, Zn, Ca, Al, and B could not be demonstrated. Conditions are described under which the bacterium grew exponentially with a doubling time of 1.8 h up to a cell density of 2 g cells (dry weight)/1.     

Biosynthesis of coenzyme F420 and methanopterin in Methanobacterium thermoautotrophicum

Growing cultures of Methanobacterium thermoautotrophicum were supplemented with [U-¹⁴C]adenosine or [1-¹⁴C]adenosine. 7,8-Didemethyl-8-hydroxy-5-deazariboflavin (factor F₀) and 7-methylpterin were isolated from the culture medium. Hydrolysis of cellular RNA yielded purine and pyrimidine nucleotides. The ribose side chain of proffered adenosine is efficiently incorporated into cellular adenosine and guanosine nucleotide pools but not into pyrimidine nucleotides. Thus, M. thermoautotrophicum can utilize exogenous adenosine by direct phosphorylation without hydrolysis of the glycosidic bond, and AMP can be efficiently converted to GMP. Factor F₀ and 7-methylpterin had approximately the same specific activities as the purine nucleotides. It follows that the ribityl side chain of factor F₀ is derived from the ribose side chain of a nucleotide precursor by reduction. The pyrazine ring of methanopterin is formed by ring expansion involving the ribose side chain of the precursor, GTP.Abbreviations Factor F₀ 8-hydroxy-6,7-didemethyl-5-deazariboflavin - APRT adenine phosphoribosyltransferase - GPRT guanine phosphoribosyltransferase - PRPP phosphoribosylpyrophosphate - HPLC high performance liquid chromatography     

Incorporation of 8 succinate per mol nickel into factors F430 by Methanobacterium thermoautotrophicum

Factors F₄₃₀ from methanogenic bacteria have recently been shown to contain nickel and it has been speculated that they may have a nickel tetrapyrrole structure. This assumption was tested by determining whether succinate is incorporated by growing Methanobacterium thermoautotrophicum into three factors F₄₃₀. Succinate is assimilated by Methanobacterium thermoautotrophicum into the amino acids glutamate, arginine and proline and into tetrapyrroles rather than other cell components. It was found that per mol nickel 8–9 mol of succinate were incorporated into the three factors F₄₃₀ which is the amount predicted for a tetrapyrrole structure. Since the three factors F₄₃₀ only contained significant amounts of glutamate rather than arginine or proline, the incorporation data suggest that factors F₄₃₀ are nickel tetrapyrrole compounds. Spectral properties of the three factors F₄₃₀, apparent molecular weights, and the absence of phosphor in these compounds are also described.     

The solution structure of ribosomal protein S17E from Methanobacterium thermoautotrophicum: a structural homolog of the FF domain

The ribosomal protein S17E from the archaeon Methanobacterium thermoautotrophicum is a component of the 30S ribosomal subunit. S17E is a 62-residue protein conserved in archaea and eukaryotes and has no counterparts in bacteria. Mammalian S17E is a phosphoprotein component of eukaryotic ribosomes. Archaeal S17E proteins range from 59 to 79 amino acids, and are about half the length of the eukaryotic homologs which have an additional C-terminal region. Here we report the three-dimensional solution structure of S17E. S17E folds into a small three-helix bundle strikingly similar to the FF domain of human HYPA/FBP11, a novel phosphopeptide-binding fold. S17E bears a conserved positively charged surface acting as a robust scaffold for molecular recognition. The structure of M. thermoautotrophicum S17E provides a template for homology modeling of eukaryotic S17E proteins in the family.     

Solution structure of the hypothetical protein Mth677 from Methanobacterium thermoautotrophicum: a novel alpha+beta fold

The structure of Mth677, a hypothetical protein from Methanobacterium thermoautotrophicum (Mth), has been determined by using heteronuclear nuclear magnetic resonance (NMR) methods on a double-labeled (15)N-(13)C sample. Mth677 adopts a novel alpha+beta fold, consisting of two alpha-helices (one N terminal and one C terminal) packed on the same side of a central beta-hairpin. This structure is likely shared by its three orthologs, detected in three other Archaebacteria. There are no clear features in the sequences of these proteins or in the genome organization of Mth to make a reliable functional assignment to this protein. However, the structural similarity to Escherichia coli MinE, the protein which controls that division occurs at the midcell site, lends support to the proposal that Mth677 might be, in Mth, the counterpart of the topological specificity domain of MinE in E. coli.     

Nickel dependence of factor F430 content in Methanobacterium thermoautotrophicum

Factor F₄₃₀ is a yellow compound of unknown structure present in methanogenic bacteria. It has recently been shown to contain nickel. In this communication the influence of the nickel concentration in the growth medium on the factor F₄₃₀ content of Methanobacterium thermoautotrophicum and on the nickel content of factor F₄₃₀ was studied. It was found: (1) The content of factor F₄₃₀ in the cells was strongly dependent on the nickel concentration of the growth medium. Cells grown on media with 2.5 M NiCl₂ contained 28 times as much factor F₄₃₀ per g as those grown on media with 0.075 M NiCl₂; (2) factor F₄₃₀ was synthesized in nickel deprived cells only upon the addition of nickel Nickel uptake paralleled factor F₄₃₀ synthesis; (3) independent of the nickel concentration in the growth medium, the extinction coefficient at 430 nm of factor F₄₃₀ per mol nickel was always near 22,500 cm^-1 (mol Ni)^-1. These findings indicate that nickel is an essential component of factor F₄₃₀.Dedicated to Professor Otto Kandler on the occasion of his 60th birthday