Carbon nanotube-enhanced DNA biosensor for DNA hybridization detection using manganese(II)-Schiff base complex as hybridization indicator

A Mn(II) complex, MnL (L = sodium (E)-3-((1-carboxyethylimino)methyl)-4-hydroxybenzenesulfonate), was synthesized and characterized using elemental analysis and IR spectroscopy. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction between MnL and salmon sperm DNA. It was revealed that MnL presented high electrochemical activity on glassy carbon electrode (GCE), and it could be intercalated into the double helices of double-stranded DNA (dsDNA). Using MnL as the hybridization indicator, a novel and sensitive electrochemical DNA biosensor based on multiwall carbon nanotubes functionalized with carboxyl groups (MWCNTs-COOH, on which DNA probes were covalently immobilized) was prepared. The target single-stranded DNA (ssDNA) could be quantified ranging from 6.7 × 10⁻¹⁰ M to 8.4 × 10⁻⁹ M with good linearity (r = 0.9922). A detection limit of 1.4 × 10⁻¹⁰ M (3σ, n = 9) was achieved.     

Electrochemical DNA biosensor based on silver nanoparticles/poly(3-(3-pyridyl) acrylic acid)/carbon nanotubes modified electrode

In this work, we present an electrochemical DNA sensor based on silver nanoparticles/poly(trans-3-(3-pyridyl) acrylic acid) (PPAA)/multiwalled carbon nanotubes with carboxyl groups (MWCNTs-COOH) modified glassy carbon electrode (GCE). The polymer film was electropolymerized onto MWCNTs-COOH modified electrode by cyclic voltammetry (CV), and then silver nanoparticles were electrodeposited on the surface of PPAA/MWCNTs-COOH composite film. Thiol group end single-stranded DNA (HS-ssDNA) probe was easily covalently linked onto the surface of silver nanoparticles through a 5′ thiol linker. The DNA hybridization events were monitored based on the signal of the intercalated adriamycin by differential pulse voltammetry (DPV). Based on the response of adriamycin, only the complementary oligonucleotides gave an obvious current signal compared with the three-base mismatched and noncomplementary oligonucleotides. Under the optimal conditions, the increase of reduction peak current of adriamycin was linear with the logarithm of the concentration of the complementary oligonucleotides from 9.0 × 10⁻¹² to 9.0 × 10⁻⁹ M with a detection limit of 3.2 × 10⁻¹² M. In addition, this DNA sensor exhibited an excellent reproducibility and stability during DNA hybridization assay.     

Fabrication of chronocoulometric DNA sensor based on gold nanoparticles/poly(l-lysine) modified glassy carbon electrode

In this work, we fabricated a sensitivity chronocoulometric DNA sensor (CDS) based on gold nanoparticles (AuNPs)/poly(l-lysine) complex film modified glassy carbon electrode. Hexaammineruthenium(III) chloride ([Ru(NH₃)₆]³⁺) was used as the electroactive indicator. The assembled process was investigated by cyclic voltammetry (CV) and chronocoulometry (CC). CC is used to monitor the DNA hybridization event by measurement of electrostatic binding [Ru(NH₃)₆]³⁺. Under the optimal conditions, the signal of [Ru(NH₃)₆]³⁺ was linear with the logarithm of the concentration of the complementary oligonucleotides from 1.0 × 10⁻¹³ to 1.0 × 10⁻¹¹ M, and the detection limit is 3.5 × 10⁻¹⁴ M.     

Ultrasensitive DNA sensor based on gold nanoparticles/reduced graphene oxide/glassy carbon electrode

We have designed a simple and novel electrochemical biosensor based on glassy carbon electrode (GCE) for DNA detection. GCE was modified with reduced graphene oxide (RGO) and gold nanoparticles (AuNPs) by the electrochemical method, which is helpful for immobilization of thiolated bioreceptors. The electrode modification processes were characterized by scanning electron microscopy (SEM) and electrochemical methods. Then a single-stranded DNA (ssDNA) probe for BRCA1 5382 insC mutation detection was immobilized on the modified electrode for a specific time. The experimental conditions, such as probe immobilization time and target DNA (complementary DNA) hybridization time and temperature with probe DNA, were optimized using electrochemical methods. The electrochemical response for DNA hybridization and synthesis was measured using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) methods. The calibration graph contains two linear ranges; the first part is in the range of 3.0 × 10⁻²⁰ to 1.0 × 10⁻¹² M, and the second segment part is in the range of 1.0 × 10⁻¹² to 1.0 × 10⁻⁷ M. The biosensor showed excellent selectivity for the detection of the complementary sequences from noncomplementary sequences, so it can be used for detection of breast cancer.     

[Cu(phen)2] acts as electrochemical indicator and anchor to immobilize probe DNA in electrochemical DNA biosensor

We demonstrate a novel protocol for sensitive in situ label-free electrochemical detection of DNA hybridization based on copper complex ([Cu(phen)₂]²⁺, where phen = 1,10-phenanthroline) and graphene (GR) modified glassy carbon electrode. Here, [Cu(phen)₂]²⁺ acted advantageously as both the electrochemical indicator and the anchor for probe DNA immobilization via intercalative interactions between the partial double helix structure of probe DNA and the vertical aromatic groups of phen. GR provided large density of docking site for probe DNA immobilization and increased the electrical conductivity ability of the electrode. The modification procedure was monitored by electrochemical impedance spectroscopy (EIS). Square-wave voltammetry (SWV) was used to explore the hybridization events. Under the optimal conditions, the designed electrochemical DNA biosensor could effectively distinguish different mismatch degrees of complementary DNA from one-base mismatch to noncomplementary, indicating that the biosensor had high selectivity. It also exhibited a reasonable linear relationship. The oxidation peak currents of [Cu(phen)₂]²⁺ were linear with the logarithm of the concentrations of complementary target DNA ranging from 1 × 10⁻¹² to 1 × 10⁻⁶ M with a detection limit of 1.99 × 10⁻¹³ M (signal/noise = 3). Moreover, the stability of the electrochemical DNA biosensor was also studied.     

Voltammetric determination of cefixime in pharmaceuticals and biological fluids

Electroreduction and adsorption of cefixime was studied in phosphate buffer by cyclic voltammetry (CV), differential pulse cathodic adsorptive stripping voltammetry (DPCAdSV), and square-wave cathodic adsorptive stripping voltammetry (SWCAdSV) at hanging mercury drop electrode (HMDE). These fully validated sensitive and reproducible cathodic adsorptive stripping voltammetric procedures were applied for the trace determination of the bulk drug in pharmaceutical formulations and in human urine. The optimal experimental parameters were as follows: accumulation potential = −0.1 V (vs. Ag/AgCl, 3 M KCl), accumulation time = 50 s, frequency = 140 Hz, pulse amplitude = 0.07 V, and scan increment = 10 mV in phosphate buffer (pH 2.6). The first peak current showed a linear dependence with the drug concentration over the range of 50 ng ml⁻¹ to 25.6 μg ml⁻¹. The achieved limit of detection and limit of quantitation were 3.99 and 13.3 ng ml⁻¹ by SWCAdSV and 7.98 and 26.6 ng ml⁻¹ by DPCAdSV, respectively. The procedure was applied to assay the drug in tablets. Applicability was also tested in urine samples. Peak current was linear with the drug concentration in the range of 1 to 60 μg ml⁻¹ of the urine, and minimum detectability was found to be 12.6 ng ml⁻¹ by SWCAdSV and 58.4 ng ml⁻¹ by DPCAdSV.     

Large catalase based bioelectrode for biosensor application

A large catalase (CAT) (Mr ~ 90 kDa), immobilized on multiwalled carbon nanotubes—Nafion^® (MWCNT-NF) matrix and encapsulated with polyethylenimine (PEI) on glassy carbon electrode (GCE), showed a pair of nearly reversible cyclic voltammetric peaks for Fe^(III)/Fe^(II) couple with formal potential of about −0.45 V (vs. Ag/AgCl electrode at pH 7.5). PEI significantly reduced the charge transfer resistance and stabilized the bioelectrode through electrostatic interaction. The electron transfer rate constant and surface coverage of the immobilized CAT were 1.05 ± 0.2 s⁻¹ and 2.1 × 10⁻¹⁰ mol cm⁻², respectively. Studies on electrocatalytic activity and kinetics of GCE/MWCNT-NF/CAT/PEI for hydrogen peroxide (H₂O₂) showed the apparent Michaelis-Menten constant of 3 mM, linear response in the range of 10 μM to 5 mM, response time of ~ 2 s for steady state current, and detection limit of ~ 1 μM. A high operational and storage stability was also demonstrated for the bioelectrode. Hence, the direct electrochemistry of the large catalase and its potential biosensor application have been established through this investigation.     

Determination of dopamine in the presence of ascorbic acid using poly(3,5-dihydroxy benzoic acid) film modified electrode

A polymerized film of 3,5-dihydroxy benzoic acid (DBA) was prepared on the surface of a glassy carbon electrode (GCE) in neutral solution by cyclic voltammetry (CV). The poly(DBA) film-coated GCE exhibited excellent electrocatalytic activity toward the oxidation of dopamine (DA). A linear range of 1.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M and a detection limit of 6.0 × 10⁻⁸ M were observed in pH 7.4 phosphate buffer solutions. Moreover, the interference of ascorbic acid (AA) was effectively eliminated. This work provides a simple and easy approach to selective detection of DA in the presence of AA.     

Entrapment of human flavin-containing monooxygenase 3 in the presence of gold nanoparticles: TEM,FTIR and electrocatalysis

Background

Nanosized particles of gold are widely used as advanced materials for enzyme catalysis investigations. In some bioanalytical methods these nanoparticles can be exploited to increase the sensitivity by enhancing electron transfer to the biological component i.e. redox enzymes such as drug metabolizing enzymes.

Methods

In this work, we describe the characterization of human flavin-containing monooxygenase 3 (hFMO3) in a nanoelectrode system based on AuNPs stabilized with didodecyldimethylammonium bromide (DDAB) on glassy carbon electrodes. Once confirmed by FTIR spectroscopy that in the presence of DDAB-AuNPs the structural integrity of hFMO3 is preserved, the influence of AuNPs on the electrochemistry of the enzyme was studied by cyclic voltammetry and square wave voltammetry.

Results

Our results show that AuNPs improve the electrochemical performance of hFMO3 on glassy carbon electrodes by enhancing the electron transfer rate and the current signal-to-noise ratio. Moreover, the electrocatalytic activity of hFMO3-DDAB-AuNP electrodes which was investigated in the presence of two well known substrates, benzydamine and sulindac sulfide, resulted in K_M values of 52 μM and 27 μM, with V_max of 8 nmol min^− 1 mg^− 1 and 4 nmol min^− 1 mg^− 1, respectively, which are in agreement with data obtained with the microsomal enzyme.

Conclusions

The immobilization of hFMO3 protein in DDAB stabilized AuNP electrodes improves the bioelectrochemical performance of this important phase I drug metabolizing enzyme.

General significance

This bio-analytical method can be considered as a promising advance in the development of new techniques suitable for the screening of novel hFMO3 metabolized pharmaceuticals.     

Covalent linkage of CYP101 with the electrode enhances the electrocatalytic activity of the enzyme: Vectorial electron transport from the electrode

Direct electrochemical transfer of electrons to the enzyme provides an excellent method of driving the catalytic reactions of cytochrome P450 enzymes that form a superfamily of vital heme enzymes involved in biological monooxygenation reactions. Covalent attachment of N-(1-pyrenyl) maleimide (pyrene maleimide) to the bacterial cytochrome P450, CYP101 has been carried out and the conjugated enzyme was shown to be specifically immobilized onto the glassy carbon electrode through the pyrene group. The electrode immobilized pyrene-conjugated enzyme showed quasi-reversible electrochemistry with a midpoint potential at −330 ± 10 mV versus Ag/AgCl. The unconjugated enzyme that did not have specific linkage with the pyrene maleimide was non-specifically adsorbed on the electrode surface and the electrochemical response was much weaker than that observed in case of the conjugated enzyme, though the midpoint potential was almost unchanged. The pyrene maleimide bound CYP101 was found to have surface coverage of 1.35 ± 0.3 × 10⁻¹⁰ mol/cm² and the heterogeneous rate of electron transfer was found to be 0.21 ± 0.02 s⁻¹, which is larger than that for the unconjugated enzyme. The pyrene maleimide linked immobilized enzyme was oriented to the electrode so that efficient electron transfer takes place from the electrode to the immobilized enzyme. The oxygenase activity of the immobilized conjugated enzyme was assayed from the enhancement of catalytic current in presence of oxygen and the natural substrate camphor. Mass spectrometric studies also showed enhanced formation of hydroxycamphor by electrochemically driven catalysis in the pyrene maleimide linked immobilized CYP101.     

An electrochemical DNA biosensor based on gold nanorods decorated graphene oxide sheets for sensing platform

A simple electrochemical sensor for sensitive and selective DNA detection was constructed based on gold nanorods (Au NRs) decorated graphene oxide (GO) sheets. The high-quality Au NRs–GO nanocomposite was synthesized via the electrostatic self-assembly technique, which is considered a potential sensing platform. Differential pulse voltammetry was used to monitor the DNA hybridization event using methylene blue as an electrochemical indicator. Under optimal conditions, the peak currents of methylene blue were linear with the logarithm of the concentrations of complementary DNA from 1.0 × 10⁻⁹ to 1.0 × 10⁻¹⁴ M with a detection limit of 3.5 × 10⁻¹⁵ M (signal/noise = 3). Moreover, the prepared electrochemical sensor can effectively distinguish complementary DNA sequences in the presence of a large amount of single-base mismatched DNA (1000:1), indicating that the biosensor has high selectivity.     

The effects of point of substitution on the electrochemical behavior of new manganese phthalocyanines, tetra-substituted with diethylaminoethanethiol

The syntheses and comparative studies of the spectral, voltammetry and spectroelectrochemical properties of new manganese phthalocyanine complexes, tetra-substituted with diethylaminoethanethio at the peripheral (complex 3a) and non-peripheral positions (complex 3b) are reported. Solution electrochemistry of complex 3a showed quasi-reversible metal-based (Mn^IIIPc⁻²/Mn^IIPc⁻², E_1/2 = −0.07 V vs. Ag|AgCl) and ring-based (Mn^IIPc⁻²/Mn^IIPc⁻³, E_1/2 = −0.78 V vs. Ag|AgCl) reductions, but no ring-based oxidation. However, complex 3b showed weak irreversible ring-oxidation signal (E_p = +0.86 vs. Ag|AgCl). Reversible metal-based (Mn^IIIPc⁻²/Mn^IIPc⁻², E_1/2 = −0.04 V vs. Ag|AgCl) and ring-based (Mn^IIPc⁻²/Mn^IIPc⁻³, E_1/2 = −0.68 V vs. Ag|AgCl) reductions were also observed for complex 3b. Spectroelectrochemistry was used to confirm these processes. Reduction process involving the metal (Mn^IIIPc⁻²/Mn^IIPc⁻²) was associated with the formation of manganese μ-oxo complex in complex 3a.     

Electrochemical behavior of neomycin at DNA-modified gold electrodes

Deoxyribonucleic acid (DNA) modified gold electrodes are prepared by the dry adsorptive method and the electrochemical behavior of neomycin and the influence of Pb(II) are studied by cyclic voltammetry, chronocoulometry, differential pulse voltammetry. It is found that in 0.01 M phosphate-buffered saline (PBS) buffer solutions (pH 7.3) at DNA/Au electrode neomycin exhibits an irreversible cathodic peak (E_p = 0.489 V), which is more positive and less sensitive compared with that at bare gold electrodes (E_p = 0.423 V). In the presence of Pb(II) the peak shifts toward positive with its height increasing. Moreover, the peak height is linear to neomycin concentration over the range of 0.15-57 μM. The interaction of Pb(II)-neomycin complex with calf thymus DNA is also studied by calculating the binding constants (K) of the Pb(II)-neomycin complex to DNA and binding site size (s) from voltammetric data (1.0 × 10⁷ M⁻¹ and 4 bp, respectively).     

Electrochemical analysis of the alanine phenylthiohydantoin derivative by cathodic stripping voltammetry

A square-wave cathodic stripping voltammetry method for alanine determination as its phenylthiohydantoin (PTH-alanine) derivative is developed. To this end, all the chemical and instrumental variables affecting the determination of PTH-alanine are optimized. From studies of the mechanisms governing the electrochemical response of PTH-alanine, it was concluded that it is an electrochemically irreversible system with a diffusive-adsorptive reduction phenomenon. Under optimal conditions, the variation of analytical signal (I_p) with PTH-alanine concentration is linear in the 2.4 × 10⁻⁸ − 4.8 × 10⁻⁷ M range, with a LOD of 1.2 × 10⁻⁸ M and a LOQ of 4.2 × 10⁻⁸ M, a RSD (%) less than 11%, and a E_r (%) less than 10%. The optimized method was applied to the determination of PTH-alanine obtained from a synthetic protein after Edman reaction and the results were corroborated by high-performance liquid chromatography with UV detection.     

Biosensor based on the biocatalysis of microperoxidase-11 in nanocomposite material of multiwalled carbon nanotubes/room temperature ionic liquid for amperometric determination of hydrogen peroxide

A novel nanocomposite material of multiwalled carbon nanotubes (MWCNTs) and room temperature ionic liquid (RTIL) N-butylpyridinium hexafluorophosphate (BPPF₆) was explored and used to construct a novel microperoxidase-11 (MP-11) biosensor for the determination of hydrogen peroxide (H₂O₂). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to characterize the performance of the biosensor. Under the optimized experimental conditions, H₂O₂ could be detected in a linear calibration range of 0.5 to 7.0 × 10⁻⁷ mol L⁻¹ with a correlation coefficient of 0.9949 (n = 9) and a detection limit of 3.8 × 10⁻⁹ mol L⁻¹ at 3σ. The modified electrodes displayed excellent electrochemical response, high sensitivity, long-term stability, and good bioactivity and selectivity.     

Development of DNA electrochemical biosensor based on immobilization of ssDNA on the surface of nickel oxide nanoparticles modified glassy carbon electrode

A sensitive electrochemical method for DNA hybridization based on immobilization of DNA probe and [Ru(NH₃)₅Cl]PF₆ complex onto nickel oxide nanomaterials (NiOx_np) modified glassy carbon electrode was developed. Due to strong affinity of NiOx_np for phosphate groups, oligonucleotides probe with a terminal 5′-phosphate group was attached to the surface of the modified electrode. DNA immobilization and hybridization were characterized by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry using K₃Fe(CN)₆/K₄Fe(CN)₆ and [Ru(NH₃)₅Cl]PF₆ as probe and indicator, respectively. The Ru-complex current response indicates only the complementary sequence showing an obvious current signal in comparison to non-complementary and three or single point mismatched sequences. The fabricated biosensor possessed good selectivity and sensitivity for complementary probe, taxon: 32630 tumor necrosis factor (TNF). The linear dynamic range, sensitivity and detection limit of the proposed biosensor were 4 × 10⁻¹⁰ M to 1 × 10⁻⁸ M, 34.32 nA nM⁻¹ and 6.8 × 10⁻¹¹ M, respectively. Excellent reproducibility and stability, quite simple and inexpensive preparation are the other advantages of proposed biosensor.     

Electrochemistry of cytochrome c immobilized on cardiolipin-modified electrodes: A probe for protein–lipid interactions

Electrochemistry of cytochrome c (cyt c) immobilized on a cardiolipin (CL)/phosphatidylcholine (PC) film supported on a glassy carbon electrode was investigated using variable-frequency AC voltammetry. At low ionic strength, we observed two redox-active subpopulations characterized by distinct values of potential (E_1/2) and electron transfer rate constant (k_ET). At high ionic strength, only one subpopulation was detected, consistent with the existence of very stable cyt c–CL adducts, most probably formed by hydrophobic interactions between the protein and the fatty acid (FA) chains carried by CL. This subpopulation exhibits a comparatively high k_ET value (> 300 s^− 1) apparently changing with the structure of the FA chains of CL, i.e. 18:2(n − 6) or 14:0. Our study suggests that electrochemistry can be a useful technique for probing protein–lipid interactions, and more particularly the role played by the specific structure of the FA chains of CL on cyt c binding.     

Electrochemical assay for the determination of nitric oxide metabolites using copper(II) chlorophyllin modified screen printed electrodes

This work presents a novel electrochemical assay for the collective measurement of nitric oxide (NO) and its metabolites nitrite (NO₂⁻) and nitrate (NO₃⁻) in volume miniaturized sample at low cost using copper(II) chlorophyllin (CuCP) modified sensor electrode. Zinc oxide (ZnO) incorporated screen printed carbon electrode (SPCE) was used as a host matrix for the immobilization of CuCP. The morphological changes of the ZnO and CuCP modified electrodes were investigated using scanning electron microscopy. The electrochemical characterization of CuCP–ZnO–SPCE exhibited the characteristic quasi-reversible redox peaks at the potential +0.06 V versus Ag/AgCl. This biosensor electrode showed a wide linear range of response over NO concentrations from 200 nM to 500 μM with a detection limit of 100 nM and sensitivity of 85.4 nA μM⁻¹. Furthermore, NO₂⁻ measurement showed linearity of 100 nM to 1 mM with a detection limit of 100 nM for NO₂⁻ and sensitivity of 96.4 nA μM⁻¹. Then, the concentration of NO₃⁻ was measured after its enzymatic conversion into NO₂⁻. Using this assay, the concentrations of NO, NO₂⁻, and NO₃⁻ present in human plasma samples before and after beetroot supplement were estimated using suitable membrane coated CuCP–ZnO–SPCE and validated with the standard Griess method.     

Electrochemical biosensor for the detection of cauliflower mosaic virus 35 S gene sequences using lead sulfide nanoparticles as oligonucleotide labels

Lead sulfide (PbS) nanoparticles were synthesized in aqueous solution and used as oligonucleotide labels for electrochemical detection of the 35 S promoter from cauliflower mosaic virus (CaMV) sequence. The PbS nanoparticles were modified with mercaptoacetic acid and could easily be linked with CaMV 35 S oligonucleotide probe. Target DNA sequences were covalently linked on a mercaptoacetic acid self-assembled gold electrode, and DNA hybridization of target DNA with probe DNA was completed on the electrode surface. PbS nanoparticles anchored on the hybrids were dissolved in the solution by oxidation of HNO₃ and detected using a sensitive differential pulse anodic stripping voltammetric method. The detection results can be used to monitor the hybridization reaction. The CaMV 35 S target sequence was satisfactorily detected with the detection limit as 4.38 × 10⁻¹² mol/L (3σ). The established method extends nanoparticle-labeled electrochemical DNA analysis to specific sequences from genetically modified organisms with higher sensitivity and selectivity.     

Homoleptic copper(II) and copper(I) complexes of 5,6-dihydro-5,6-epoxy-1,10-phenanthroline. Six-coordinate copper(I) in solution

Reaction of 5,6-dihydro-5,6-epoxy-1,10-phenanthroline (L) with Cu(ClO₄)₂·6H₂O in methanol in 3:1 M ratio at room temperature yields light green [CuL₃](ClO₄)₂·H₂O (1). The X-ray crystal structure of the hemi acetonitrile solvate [CuL₃](ClO₄)₂·0.5CH₃CN has been determined which shows Jahn-Teller distortion in the CuN₆ core present in the cation [CuL₃]²⁺. Complex 1 gives an axial EPR spectrum in acetonitrile-toluene glass with g_|| = 2.262 (A_|| = 169 × 10⁻⁴ cm⁻¹) and g_⊥ = 2.069. The Cu(II/I) potential in 1 in CH₂Cl₂ at a glassy carbon electrode is 0.32 V versus NHE. This potential does not change with the addition of extra L in the medium implicating generation of a six-coordinate copper(I) species [CuL₃]⁺ in solution. B3LYP/LanL2DZ calculations show that the six Cu-N bond distances in [CuL₃]⁺ are 2.33, 2.25, 2.32, 2.25, 2.28 and 2.25 Å while the ideal Cu(I)-N bond length in a symmetric Cu(I)N₆ moiety is estimated as 2.25 Å. Reaction of L with Cu(CH₃CN)₄ClO₄ in dehydrated methanol at room temperature even in 4:1 M proportion yields [CuL₂]ClO₄ (2). Its ¹H NMR spectrum indicates that the metal in [CuL₂]⁺ is tetrahedral. The Cu(II/I) potential in 2 is found to be 0.68 V versus NHE in CH₂Cl₂ at a glassy carbon electrode. In presence of excess L, 2 yields the cyclic voltammogram of 1. From ¹H NMR titration, the free energy of binding of L to [CuL₂]⁺ to produce [CuL₃]⁺ in CD₂Cl₂ at 298 K is estimated as −11.7 (±0.2) kJ mol⁻¹.