Preparation of biocompatible chitosan grafted poly(lactic acid) nanoparticles

Chitosan grafted poly(lactic acid) (CS-g-PLA) copolymer was synthesized and characterized by FT-IR and elemental analysis. The degree of poly(lactic acid) substitution on chitosan was 1.90 ± 0.04%. The critical aggregation concentration of CS-g-PLA in distilled water was 0.17 mg/ml. Three methods of preparing CS-g-PLA nanoparticles (diafiltration method, ultrasonication method and diafiltration combined with ultrasonication method) were investigated and their effect was compared. Of the three methods, diafiltration combined with ultrasonication method produced nanoparticles with optimal property in terms of size and morphology, with size ranging from 133 to 352 nm and zeta potential from 36 to 43 mV. Also, the hemolytic activity and cytotoxicity of the CS-g-PLA based nanoparticles was tested, and results showed low hemolysis rate (<5%) and no significant cytotoxicity effect of these nanoparticles.     

Chitosan-g-PEG/DNA complexes deliver gene to the rat liver via intrabiliary and intraportal infusions

BACKGROUND: Chitosan has been shown to be a non-toxic and efficient vector for in vitro gene transfection and in vivo gene delivery through pulmonary and oral administrations. Recently, we have shown that chitosan/DNA nanoparticles could mediate high levels of gene expression following intrabiliary infusion 1. In this study, we have examined the possibility of using polyethylene glycol (PEG)-grafted chitosan/DNA complexes to deliver genes to the liver through bile duct and portal vein infusions. METHODS: PEG (Mw: 5 kDa) was grafted onto chitosan (Mw: 47 kDa, deacetylation degree: 94%) with grafting degrees of 3.6% and 9.6% (molar percentage of chitosan monosaccharide units grafted with PEG). The stability of chitosan-g-PEG/DNA complexes was studied by measuring the change in particle size and by agarose gel electrophoresis against bile or serum challenge. The influence of PEG grafting on gene transfection efficiency was evaluated in HepG2 cells using luciferase reporter gene. Chitosan and chitosan-g-PEG/DNA complexes were delivered to the liver through bile duct and portal vein infusions with a syringe pump. Gene expression in the liver and the distribution of gene expression in other organs were evaluated. The acute liver toxicity of chitosan and chitosan-g-PEG/DNA complexes was examined by measuring serum alanine aminotranferase (ALT) and aspartate aminotransferase (AST) activities as a function of time. RESULTS: Both chitosan and chitosan-g-PEG displayed comparable gene transfection efficiency in HepG2 cells. After challenge with serum and bile, chitosan-g-PEG/DNA complexes, especially those prepared with chitosan-g-PEG (GD = 9.6%), did not form large aggregates like chitosan/DNA complexes but remained stable for up to 30 min. In addition, chitosan-g-PEG prevented the degradation of DNA in the presence of serum and bile. On day 3 after bile duct infusion, chitosan-g-PEG (GD = 9.6%)/DNA complexes mediated three times higher gene expression in the liver than chitosan/DNA complexes and yielded background levels of gene expression in other organs. On day 1 following portal vein infusion, gene expression level induced by chitosan/DNA complexes was hardly detectable but chitosan-g-PEG (GD = 9.6%) mediated significant transgene expression. Interestingly, transgene expression by chitosan-g-PEG/DNA complexes in other organs after portal vein infusion increased with increasing grafting degree of PEG. The ALT and AST assays indicated that grafting of PEG to chitosan reduced the acute liver toxicity towards the complexes. CONCLUSION: This study demonstrated the potential of chitosan-g-PEG as a safe and more stable gene carrier to the liver.     

Novel Antimicrobial and Antioxidant Chitosan Derivatives Prepared by Green Grafting with Phenyllactic Acid

In order to develop novel antimicrobial and antioxidant biopolymers for active packaging to improve quality and safety of food products, we for the first time grafted phenyllatic acid (PLA) on chitosan (CS) using a green and facile method. The reaction between PLA and CS was confirmed by UV ? vis and Fourier-transform infrared spectroscopy. The grafting ratio was 5.72%, 9.16% and 11.83%, respectively, at a PLA:CS molar ratio of 1:1, 2:1, and 3:1. The grafting of PLA on CS reduced the thermal decomposition temperature of CS according to differential scanning calorimetry. A greater grafting ratio corresponded to a higher activity of scavenging 2, 2-diphenyl-1-picrylhydrazyl radicals and inhibition to growth of Gram-positive Staphylococcus aureus and Listeria monocytogenes, Gram-negative Escherichia coli and Salmonella enterica, and fungi Saccharomyces cerevisiae and Penicillium expansum (P < 0.05). These novel CS derivatives have potential to reduce oxidation and inhibit spoilage microorganisms to improve food quality and safety.     

Modified chitosans carrying sulfonic acid groups

The sulfonic acid function was introduced into chitosan by reacting it with 5-formyl-2-furansulfonic acid, sodium salt, under the mild conditions of the Schiff reaction, thus avoiding polymer degradation and O-substitution. The reaction of chitosan (degree of deacetylation 0·58) with 5-formyl-2-furansulfonic acid, sodium salt produced a viscous solution that, upon hydrogenation, yielded N-sulfofurfuryl chitosan sodium salt. Infrared spectrometry, alkalimetry and elemental analysis provided evidence that the degree of substitution was 0·26. Circular dichroism measurements on solutions showed multiple Cotton bands in the pH interval 7·1–8·3, while at lower and higher pH values just one negative band was observed, thus providing indication of the polyampholyte nature of N-sulfofurfuryl chitosan. The ¹³C-NMR and FTIR spectra showed typical signals of furane carbons. Metal ion solutions at concentrations in the range 0·1–5·0 m , pH 6, promoted precipitation of metal ion complexes of N-sulfofurfuryl chitosan, with most effective removal from the solutions for Cu(II), Pb(II) and Ni(II). Sulfoethyl N-carboxymethyl chitosan was also synthesized from 2-chloroethanesulfonic acid in organic media: the sulfur content was similar (3·7%) in both polymers.     

Effect of ultrasonic treatment on the biochemphysical properties of chitosan

Four chitosans with different molecular weights and degrees of deacetylation degree and 28 chitosans derived from these initial chitosans by ultrasonic degradation have been characterized by gel permeation chromatography (GPC), FT-IR spectroscopy, X-ray diffraction and titrimetric analyses. Antimicrobial activities were investigated against E. coli and S. aureus using an inhibitory rate technique. The results showed that ultrasonic treatment decreased the molecular weight of chitosan, and that chitosan with higher molecular weight and higher DD was more easily degraded. The polydispersity decreased with ultrasonic treatment time, which was in linear relationship with the decrease of molecular weight. Ultrasonic degradation changed the DD of initial chitosan with a lower DD (<90%), but not the DD of the initials chitosan with a higher DD (>90%). The increased crystallinity of ultrasonically treated chitosan indicated that ultrasonic treatment changed the physical structure of chitosan, mainly due to the decrease of molecular weight. Ultrasonic treatment enhanced the antimicrobial activity of chitosan, mainly due to the decrease of molecular weight.     

Optimal gamma-ray dose and irradiation conditions for producing low-molecular-weight chitosan that retains its chemical structure

This study focuses on the optimal conditions for gamma irradiation to reduce the molecular weight of chitosan but still retain its chemical structure. Chitosan was irradiated under various conditions, i.e. flake solid state (condition 1), flake dispersed in water (condition 2), flake dispersed in 0.05, 0.1, 1 and 2% aqueous K(2)S(2)O(8) solution (conditions 3a, 3b, 3c and 3d, respectively), flake dispersed in 0.5, 1 and 2% aqueous H(2)O(2) solution (conditions 4a, 4b and 4c, respectively), and chitosan acetic acid solution (condition 5). Comparative studies were done using three types of chitosans with molecular weights of the order of 10(5) Da with degrees of deacetylation of 0.80, 0.85 and 0.90%. For all conditions, after irradiation, there were two regions of molecular weight reduction. A severe degradation occurred in the first region with decreases in the molecular weight of 80% for radiation doses up to 50 kGy for conditions 1, 2 and 3 (3a-3c) and 20 kGy for condition 4. In the second region, a slow degradation occurred, which resembled a plateau stage. The results for conditions 3d and 5 were the most dramatic, since the primary structure of chitosan was changed after the irradiation. The degradation of chitosan by gamma rays was found to be most effective for the amorphous structure. The retention of the structure of chitosan after gamma irradiation makes it possible to produce a low-molecular-weight chitosan that retains its functionality, as demonstrated by its activity in the coupling reaction with N,N'-carbonyldiimidazole.     

Enhanced anti-topoisomerase II activity by mucoadhesive 4-CBS–chitosan/poly (lactic acid) nanoparticles

In this study, the biodegradable mucoadhesive 4-carboxybenzensulfonamide chitosan (4-CBS–chitosan)/poly (lactic acid) (PLA) nanoparticles were fabricated by the electrospray ionization technique for enhancing anti-topoisomerase II (Topo II) activity. The obtained (4-CBS–chitosan/PLA)-DOX nanoparticles were characterized using SEM, particle size analyzer. We emphasis on encapsulation efficiency, in vitro drug release behavior and also performed in vitro studies of Topo II inhibitory activity using gel electrophoresis. In addition, the cytotoxicity of the 4-CBS–chitosan/PLA nanoparticles using MTT assay was also studied. The mean particle size of spherical shaped (4-CBS–chitosan/PLA)-DOX is less than 300 nm. The DOX loaded 4-CBS–chitosan/PLA composite nanoparticles produced high entrapment efficiency of 85.8% and provided the prolonged release of DOX extended to 26 days and also still had strong Topo II inhibitory activity up to 77.4%. Overall, it was shown that 4-CBS–chitosan/PLA nanoparticles could be promising carriers for controlled delivery of anticancer drugs.     

In vivo evaluation of in situ polysaccharide based hydrogel for prevention of postoperative adhesion

In this paper, the carboxymethyl chitosan/oxidized dextran hydrogel was developed and its potency application in the prevention of postoperative adhesion was investigated. The developed hydrogel showed porous and interconnected interior structure with pore size about 250μm, which was sensitive to lysozymic solution (1.5μg/ml) with almost complete degradation after 4 weeks of in vitro incubation. In vivo study suggested that the developed hydrogel showed the great capacity on the prevention of postoperative adhesions in rat model. According to the result of histopathological examination, it clearly showed that the mesothelial cell layer of abdominal wall and cecum were completely recovered after 7 days of surgery in 3% carboxymethyl chitosan/oxidized dextran hydrogel group, while obvious adhesion between abdominal wall and cecum was observed as treatment with saline solution or 3% carboxymethyl chitosan solution after 1 day of surgery. All these results suggested that the developed biodegradable hydrogel might have potential application in the prevention of postoperative adhesion.     

Compatible ternary blends of chitosan/poly(vinyl alcohol)/poly(lactic acid) produced by oil-in-water emulsion processing

Ternary compatible blends of chitosan, poly(vinyl alcohol), and poly(lactic acid) were prepared by an oil-in-water (O/W) emulsion process. Solutions of chitosan in aqueous acetic acid, poly(vinyl alcohol) (PVA) in water, and poly(lactic acid) (PLA) in chloroform were blended with a high-shear mixer. PVA was used as an emulsifier to stabilize the emulsion and to reduce the interfacial tension between the solid polymers in the blends produced. It proved to work very well because the emulsions were stable for periods of days or weeks and compatible blends were obtained when PVA was added. This effect was attributed to a synergistic effect of PVA and chitosan because the binary blends PVA/PLA and chitosan/PLA were completely incompatible. The blends were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal mechanical analysis (TMA), stress-strain tests, and Fourier transform infrared spectroscopy (FTIR). The results indicated that despite the fact that the system contained distinct phases some degree of molecular miscibility occurred when the three components were present in the blend.     

Study of the biodisintegration of a bioplastic material waste

The aim of this work was to study the biodisintegration degree of different pieces made of a biodegradable thermoplastic material, the polylactic acid (PLA) with and without corn in its composition, is studied. The pieces of different shapes and thicknesses were obtained by both injection and extrusion processes, where also a specific foaming additive of polystyrene was added. The PLA and PLA-corn manufactured pieces were subjected to aerobic degradation at a constant temperature of 58 ± 2 °C for 90 days, following EN 14806 and ISO 20200:2004 Norms. It was found that the pieces made of PLA and PLA with foaming agent had an average biodisintegration degree of 63.6%. With regard to the pieces made of PLA-corn, an average biodisintegration degree of 79.7% was obtained. In this case, the percentage of non degraded material was independent of the size, shape and thickness of the original pieces.     

Selective carboxypropionylation of chitosan: synthesis, characterization, blood compatibility, and degradation

Two water-soluble chitosan (WSC) derivatives of N-succinyl-chitosan (NSCS) and N,O-succinyl-chitosan (NOSCS) with a degree of substitution (DS) that ranged form 0.28 to 0.61 were selectively synthesized by varying the molar ration of succinic anhydride and chitosan. The chemical structure and physical properties of the chitosan derivatives were characterized by FT-IR, ¹H NMR, and XRD. XRD analysis showed that the derivatives were amorphous. The lysozyme enzymatic degradation results revealed that the NSCS was of higher susceptibility to lysozyme. The degradation rate and the solubility of the chitosan derivatives were strongly determined by the degree of substitution and the position of the substitution. The results of antithrombotic properties, hemolytic properties and anticoagulant properties of WSCs indicated that the blood compatibility was dramatically improved, and the carboxyl group introduced on the C-6 or C-2 hydroxyl group appeared to impact anticoagulant activity in different ways.     

The enzymatic degradation and swelling properties of chitosan matrices with different degrees of N-acetylation

In the design of chitosan-based drug delivery systems and implantable scaffolds, the biodegradation rate of the chitosan matrix represents a promising strategy for drug delivery and the function of carriers. In this study, we have investigated the degradation of chitosan with different degrees of N-acetylation, with respect to weight loss, water absorption, swelling behavior, molecular weight loss of bulk materials, and reducing sugar content in the media. Chitosan matrices were prepared by compression molding. The results revealed that the initial degradation rate, equilibrium water absorption, and swelling degree increased with decreasing degree of deacetylation (DD) and a dramatic rise began as DD of the chitosan matrix decreased to 62.4%. Chitosan matrices with DD of 52.6%, 56.1%, and 62.4% had the weight half-life of 9.8, 27.3, and more than 56 days, respectively, and the weight half-life of average molecular weight 8.4, 8.8, and 20.0 days, respectively. For chitosan matrices with DD of 71.7%, 81.7%, and 93.5%, both types of half-life exceeded 84 days because of the much slower degradation rate. The dimension of chitosan matrices during degradation was determined by the process of swelling and degradation. These findings may help to design chitosan-based biomedical materials with predetermined degradation timed from several days to months and proper swelling behaviors.     

Mode of action of a family 75 chitosanase from Streptomyces avermitilis

Chitooligosaccharides (CHOS) are oligomers composed of glucosamine and N-acetylglucosamine with several interesting bioactivities that can be produced from enzymatic cleavage of chitosans. By controlling the degree of acetylation of the substrate chitosan, the enzyme, and the extent of enzyme degradation, CHOS preparations with limited variation in length and sequence can be produced. We here report on the degradation of chitosans with a novel family 75 chitosanase, SaCsn75A from Streptomyces avermitilis . By characterizing the CHOS preparations, we have obtained insight into the mode of action and subsite specificities of the enzyme. The degradation of a fully deacetylated and a 31% acetylated chitosan revealed that the enzyme degrade these substrates according to a nonprocessive, endo mode of action. With the 31% acetylated chitosan as substrate, the kinetics of the degradation showed an initial rapid phase, followed by a second slower phase. In the initial faster phase, an acetylated unit (A) is productively bound in subsite -1, whereas deacetylated units (D) are bound in the -2 subsite and the +1 subsite. In the slower second phase, D-units bind productively in the -1 subsite, probably with both acetylated and deacetylated units in the -2 subsite, but still with an absolute preference for deacetylated units in the +1 subsite. CHOS produced in the initial phase are composed of deacetylated units with an acetylated reducing end. In the slower second phase, higher amounts of low DP fully deacetylated oligomers (dimer and trimer) are produced, while the higher DP oligomers are dominated by compounds with acetylated reducing ends containing increasing amounts of internal acetylated units. The degradation of chitosans with varying degrees of acetylation to maximum extents of degradation showed that increasingly longer oligomers are produced with increasing degree of acetylation, and that the longer oligomers contain sequences of consecutive acetylated units interspaced by single deacetylated units. The catalytic properties of SaCsn75A differ from the properties of a previously characterized family 46 chitosanase from S. coelicolor (ScCsn46A).     

Synthesis and characterization of pH-sensitive hydrogel composed of carboxymethyl chitosan for colon targeted delivery of ornidazole

In the present study, carboxymethyl chitosan was prepared from chitosan, crosslinked with glutaraldehyde and evaluated in vitro as a potential carrier for colon targeted drug delivery of ornidazole. Ornidazole was incorporated at the time of crosslinking of carboxymethyl chitosan. The chitosan was evaluated for its degree of deacetylation (DD) and average molecular weight; which were found to be 84.6% and 3.5×10(4) Da, respectively. The degree of substitution on prepared carboxymethyl chitosan was found to be 0.68. All hydrogel formulations showed more than 85% and 74% yield and drug loading, respectively. The swelling behaviour of prepared hydrogels checked in different pH values, 1.2, 6.8 and 7.4, indicated pH responsive swelling characteristic with very less swelling at pH 1.2 and quick swelling at pH 6.8 followed by linear swelling at pH 7.4 with slight increase. In vitro release profile was carried out at the same conditions as in swelling and drug release was found to be dependant on swelling of hydrogels and showed biphasic release pattern with non-fickian diffusion kinetics at higher pH. The carboxymethylation of chitosan, entrapment of drug and its interaction in prepared hydrogels were checked by FTIR, (1)H NMR, DSC and p-XRD studies, which confirmed formation of carboxymethyl chitosan from chitosan and absence of any significant chemical change in ornidazole after being entrapped in crosslinked hydrogel formulations. The surface morphology of formulation S6 checked before and after dissolution, revealed open channel like pores formation after dissolution.     

Anticoagulant activity of a sulfated chitosan

Chitin prepared from the shells of rice-field crabs (Somanniathelphusa dugasti) was converted into chitosan with a degree of acetylation of 0.21 and then sulfated with chlorosulfonic acid in N,N-dimethylformamide under semi-heterogeneous conditions to give 87% of water-soluble sulfated chitosan with degree of substitution (d.s) of 2.13. 1H NMR revealed the sulfate substitution at C-2, C-3 and C-6. Gel filtration on Sepharose CL-6B of the sulfated chitosan gave three fractions with average molecular weights of 7.1, 3.5, and 1.9 x 10(4). The three sulfated chitosan preparations showed strong anticoagulant activities, with the same mechanism of action observed for standard therapeutic heparin.     

N,N,N-三甲基壳聚糖甲基硫酸盐的合成及理化性质的测定

壳聚糖与甲醛、甲酸反应得到N,N-二甲基壳聚糖,然后以硫酸二甲酯为季铵化试剂反应得到N,N,N-三甲基壳聚糖甲基硫酸盐(TMCMS),用IR1、H NMR和元素分析对其结构进行了表征。元素分析结果表明其季铵化度为74.6%,差示扫描量热法和热重分析法结果表明其热稳定性比壳聚糖差,但其水溶性明显优于壳聚糖,25℃时在水中的溶解度可达20 mg/mL,浓度为2 mg/mL时在pH 3～12范围内无沉淀产生。     

Poly(L-lysine)-graft-chitosan copolymers: synthesis, characterization, and gene transfection effect

Polypeptide/polysaccharide graft copolymers poly(L-lysine)-graft-chitosan (PLL-g-Chi) were prepared by ring-opening polymerization (ROP) of epsilon-benzoxycarbonyl L-lysine N-carboxyanhydrides (Z-L-lysine NCA) in the presence of 6-O-triphenylmethyl chitosan. The PLL-g-Chi copolymers were thoroughly characterized by 1H NMR, 13C NMR, Fourier transform infrared (FT-IR), and gel permeation chromatography (GPC). The number-average degree of polymerization of PLL grafted onto the chitosan backbone could be adjusted by controlling the feed ratio of NCA to 6-O-triphenylmethyl chitosan. The particle size of the complexes formed from the copolymer and calf thymus DNA was measured by dynamic light scattering (DLS). It was found in the range of 120 approximately 340 nm. The gel retardation electrophoresis showed that the PLL-g-Chi copolymers possessed better plasmid DNA-binding ability than chitosan. The gene transfection effect in HEK 293T cells of the copolymers was evaluated, and the results showed that the gene transfection ability of the copolymer was better than that of chitosan and was dependent on the PLL grafting ratio. The PLL-g-Chi copolymers could be used as effective gene delivery vectors.     

Degradation behavior of chitosan chains in the 'green' synthesis of gold nanoparticles

The degradation behavior of chitosan chains in the synthesis of Au nanoparticles by a 'green' method was investigated in this paper for the first time. UV-vis absorption spectra suggested the formation of Au nanoparticles and TEM images showed that their sizes were between 10 and 50nm. During the process of synthesis, the intrinsic viscosity [eta] of chitosan was observed to decrease gradually, implying that the chitosan chains degraded under the reaction conditions. Further studies showed that the degree of degradation of the chitosan chains was changed with different reaction temperatures, reactant ratios, and the molecular weights of chitosan.     

Lung phospholipid metabolism in transgenic mice overexpressing peroxiredoxin 6

Previous studies with peroxiredoxin 6 (Prdx6) null mice demonstrated that the phospholipase A(2) activity of this enzyme plays a major role in lung phospholipid metabolism. This study evaluated lung phospholipid metabolism in transgenic mice that over-express Prdx6. Lung lysosomal type PLA(2) activity in transgenic mice was 222% of wild type in lung homogenate and 280% in isolated lamellar bodies. Total phospholipid, phosphatidylcholine (PC) and disaturated PC were decreased approximately 20-35% in bronchoalveolar lung fluid, lung homogenate, and lung lamellar bodies in transgenic mice although lung compliance and type 2 cell ultrastructure were unaltered. To study metabolism, unilamellar liposomes ((3)H-DPPC: PC: cholesterol: PG, 10: 5: 3: 2 mol fraction) were instilled endotracheally in anesthetized mice and lungs were removed for perfusion. Compared to wild type, transgenic mice showed similar net uptake of liposomes in 2 h, but significantly increased (3)H-DPPC degradation (38.9+/-1.1 vs. 29.0+/-1.3% of recovered dpm). The PLA(2) competitive inhibitor MJ33 decreased degradation to 15% of recovered dpm in both transgenic and wild type lungs. Incorporation of [(14)C] palmitate into DSPC at 24 h after its intravenous injection was markedly increased in both the lung surfactant (+100%) and lamellar bodies (+188%) while incorporation of [(3)H] choline was increased by only 10-20%. These results indicate increased DPPC degradation and synthesis by the reacylation pathway with Prdx6 overexpression and provide additional evidence that the PLA(2) activity of Prdx6 has an important role in lung surfactant turnover.     

Blending chitosan with polycaprolactone: effects on physicochemical and antibacterial properties

Chitosan is a well sought-after polysaccharide in biomedical applications and has been blended with various macromolecules to mitigate undesirable properties. However, the effects of blending on the unique antibacterial activity of chitosan as well as changes in fatigue and degradation properties are not well understood. The aim of this work was to evaluate the anti-bacterial properties and changes in physicochemical properties of chitosan upon blending with synthetic polyester poly(epsilon-caprolactone) (PCL). Chitosan and PCL were homogeneously dissolved in varying mass ratios in a unique 77% acetic acid in water mixture and processed into uniform membranes. When subjected to uniaxial cyclical loading in wet conditions, these membranes sustained 10 cycles of predetermined loads up to 1 MPa without break. Chitosan was anti-adhesive to Gram-positive Streptococcus mutans and Gram-negative Actinobacillus actinomycetemcomitans bacteria. Presence of PCL compromised the antibacterial property of chitosan. Four-week degradation studies in PBS/lysozyme at 37 degrees C showed initial weight loss due to chitosan after which no significant changes were observed. Molecular interactions between chitosan and PCL were investigated using Fourier transform infrared spectroscopy (FTIR) which showed no chemical bond formations in the prepared blends. Investigation by wide-angle X-ray diffraction (WAXD) indicated that the crystal structure of individual polymers was unchanged in the blends. Dynamic mechanical and thermal analysis (DMTA) indicated that the crystallinity of PCL was suppressed and its storage modulus increased with the addition of chitosan. Analysis of surface topography by atomic force microscopy (AFM) showed a significant increase in roughness of all blends relative to chitosan. Observed differences in biological and anti-bacterial properties of blends could be primarily attributed to surface topographical changes.