Electrochemical and ligand binding studies of a de novo heme protein

Heme proteins can perform a variety of electrochemical functions. While natural heme proteins carry out particular functions selected by biological evolution, artificial heme proteins, in principle, can be tailored to suit specified technological applications. Here we describe initial characterization of the electrochemical properties of a de novo heme protein, S824C. Protein S824C is a four-helix bundle derived from a library of sequences that was designed by binary patterning of polar and nonpolar amino acids. Protein S824C was immobilized on a gold electrode and the formal potential of heme-protein complex was studied as a function of pH and ionic strength. The binding of exogenous N-donor ligands to heme/S824C was monitored by measuring shifts in the potential that occurred upon addition of various concentrations of imidazole or pyridine derivatives. The response of heme/S824C to these ligands was then compared to the response of isolated heme (without protein) to the same ligands. The observed shifts in potential depended on both the concentration and the structure of the added ligand. Small changes in structure of the ligand (e.g. pyridine versus 2-amino pyridine) produced significant shifts in the potential of the heme-protein. The observed shifts correlate to the differential binding of the N-donor molecules to the oxidized and reduced states of the heme. Further, it was observed that the electrochemical response of the buried heme in heme/S824C differed significantly from that of isolated heme. These studies demonstrate that the structure of the de novo protein modulates the binding of N-donor ligands to heme.     

Direct electron transfer of hemoglobin in layered alpha-zirconium phosphate with a high thermal stability

A heme protein hemoglobin (Hb) was reacted with preexfoliated layered alpha-zirconium phosphate (alpha-ZrP) platelets. An X-ray diffraction (XRD) pattern of small range showed that the exfoliated alpha-ZrP platelets reassembled after the addition of Hb molecules, with the protein intercalated between the layers. UV-Vis and Fourier transform infrared (FTIR) spectra analysis displayed that no significant denaturation occurred to the intercalated protein. The bioactivity of Hb was also investigated by testing the electrochemical properties of the Hb/alpha-ZrP composite. Results showed that the intercalation of Hb into the layered material not only improved the thermal stability of Hb but also enhanced the direct electron transfer ability between protein molecules and electrode. The protein still showed bioactivity after treatment at a temperature as high as 85 degrees C. A pair of well-defined redox peaks at approximately -0.37 and -0.32V was observed on the cyclic voltammograms (CVs) of the Hb/alpha-ZrP composite modified electrode, and the electrode reactions showed a surface-controlled process with a single proton transfer. The resultant biosensor constructed by the Hb/alpha-ZrP composite displayed an excellent response to the reduction of hydrogen peroxide (H(2)O(2)) with good reproducibility.     

Cytochrome c3 from the sulfate-reducing anaerobe Desulfovibrio africanus Benghazi: purification and properties.

Cytochrome c3 was purified from Desulfovibrio africanus Benghazi by extraction with alkaline deoxyribonuclease, fractionation with ammonium sulfate, batch elution from carboxymethyl Sephadex followed by chromatography on the same resin, and gel filtration on Sephadex G-75. The preparation was judge homogeneous by a variety of criteria. The molecular weight was determined in an analytical ultracentrifuge, and values between 14,400 and 15,490 were obtained, depending upon the presumed value of partial specific volume. Gel filtration on a calibrated column of Sephadex G-75 gave a value of 14,900 daltons. The amino acid composition was very similar to that observed for the cytochrome from other species of Desulfovibrio, with the exception of increased levels of ThR and PhE. S-Carboxymethylation of the protein before and after heme removal by HgCl2 demonstrated eight Cys molecules involved in heme binding or four heme sites per molecule. Titration with sodium dithionite under N2 gave an electrochemical potential (E' 0) of -276 mV relative to the normal hydrogen electrode. Electrochemical titration of the cytochrome gave a Nernst plot with two linear regions with E' 0 values of -0.376 and -0.534 V. The spectra produced at various potentials exhibited shifts in isosbestic points upon reduction, suggesting changes in conformation during the reaction.     

Factors that determine the unusually low reduction potential of cytochrome c 550 in cyanobacterial photosystem II

A new purification protocol for cytochrome c550 (cyt c550) from His-tagged SYnechocYstis PCC 6803 photosystem II (PSII) was developed which allows the protein to be isolated in high yield and purity. Electron paramagnetic resonance spectroscopy of cyt c550, both free in solution and in intact PSII preparations, yields identical spectra with g values at 1.50, 2.23, and 2.87, which are characteristic for a ferric low-spin bis-histidine coordinated heme. The resonance Raman spectrum of the isolated protein exhibits features characteristic of bis-histidine axial ligation of the iron and a slight ruffling of the heme macrocycle. Together, these results indicate that the heme structure is not very different from most c-type cytochromes, and thus the structure of the heme does not account for its unusually low reduction potential. A direct electrochemical measurement of the reduction potential was performed using square wave voltammetry on a pyrolytic graphite edge electrode, yielding E1.2=-108 mV (vs. NHE) with a peak separation of 5 mV. This value is 150 mV more positive than that previously measured by redox titrations. Because the behavior of the protein in the electrochemistry experiments is indicative of adsorption to the electrode surface, we surmise that binding of the protein to the electrode excludes solvent water from the heme-binding site. We conclude that the degree of solvent exposure makes a significant contribution to the heme reduction potential. Similarly, the binding of cyt c550 to PSII may also reduce the solvent exposure of the heme, and so the direct electrochemical value of the reduction potential may be relevant to the protein in its native state.     

Facile synthesis of Fe(3)O(4)@Al(2)O(3) core-shell nanoparticles and their application to the highly specific capture of heme proteins for direct electrochemistry

In this study, magnetic core-shell Fe(3)O(4)@Al(2)O(3) nanoparticles (NPs) attached to the surface of a magnetic glassy carbon electrode (MGCE) were used as a functional interface to immobilize several heme proteins including hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP) for fabricating protein/Fe(3)O(4)@Al(2)O(3) film. Transmission electron microscope, UV-vis spectroscopy, electrochemical impedance spectroscopy, and cyclic voltammetry were used to characterize the films. With the advantages of the magnetism and the excellent biocompatibility of the Fe(3)O(4)@Al(2)O(3) NPs, the protein/Fe(3)O(4)@Al(2)O(3) film could be easily fabricated in the present of external magnetic field, and well retained the bioactivity of the immobilized proteins, hence dramatically facilitated direct electron transfer of heme proteins and excellent electrocatalytic behaviors towards H(2)O(2) were demonstrated. The presented system avoids the complex synthesis for protecting Fe(3)O(4) NPs, supplies a facile, low cost and universal way to immobilize proteins, and is promising for construction of third-generation biosensors and other bio-magnetic induction devices.     

Fundamental studies of the cytochrome c immobilization by the potential cycling method on nanometer-scale nickel oxide surfaces

This work describes the performance of cytochrome c/nickel oxide nanoparticles/glassy carbon electrode, prepared by the electrochemical deposition of the nickel oxide nanoparticles (NiO NPs) on the glassy carbon (GC) electrode surface and the cytochrome c immobilization on the nickel oxide nanoparticle surfaces. An extensive sample examination with the help of the SEM and AFM presented the existence of different geometrical shapes of the nickel oxide particles. These geometrical structures could lead to the better immobilization of proteins on their surfaces. The resulting electrode displayed an excellent behavior for the redox of the cytochrome c. Also, the resulting heme protein exhibited a direct electrical contact with the electrode because of the structural alignment of the heme protein on the nanometer-scale nickel oxide surfaces. This method could be suitable for applications to nanofabricated devices. In the end, it was concluded that the cytochrome c could be tethered to the nanometer-scale nickel oxide surfaces.     

MgFe-layered double hydroxide modified electrodes for direct electron transfer of heme proteins

In this study, the Fe-based layered double hydroxides (Mg(3)Fe LDH) were used to immobilize heme proteins including hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP) for fabrication of heme/Mg(3)Fe LDH film on glassy carbon electrode (Mg(3)Fe-heme/GCE). The possible role of iron in framework of LDH to promote direct electron transfer (DET) of heme proteins was investigated using an LDH containing non-iron as a reference. Hb was selected as a model protein for studying the electrocatalytic activity of immobilized heme in LDH film. The Mg(3)Fe-Hb/GCE displayed an enhanced electrocatalytic reduction towards H(2)O(2). The biosensor showed a very low detection limit (0.036μM) and apparent Michaelis-Menten constant (7.98μM). This work outlines that Fe-based LDH modified electrode provides a promising platform for immobilization of heme proteins and development of sensitive biosensors.     

Redox-induced conformational changes in myoglobin and hemoglobin: electrochemistry and ultraviolet-visible and Fourier transform infrared difference spectroscopy at surface-modified gold electrodes in an ultra-thin-layer spectroelectrochemical cell.

Using suitable surface-modified electrodes, we have developed an electrochemical system which allows a reversible heterogeneous electron transfer at high (approximately 5 mM) protein concentrations between the electrode and myoglobin or hemoglobin in an optically transparent thin-layer electrochemical (OTTLE) cell. With this cell, which is transparent from 190 to 10,000 nm, we have been able to obtain electrochemically-induced Fourier-transform infrared (FTIR) difference spectra of both proteins. Clean protein difference spectra between the redox states were obtained because of the absence of redox mediators in the protein solution. The reduced-minus-oxidized difference spectra are characteristic for each protein and arise from redox-sensitive heme modes as well as from polypeptide backbone and amino acid side chain conformational changes concomitant with the redox transition. The amplitudes of the difference bands, however, are small as compared to the total amide I absorbance, and correspond to approximately 1% (4%) of the reduced-minus-oxidized difference absorbance in the Soret region of myoglobin (hemoglobin) and to less than 0.1% of the total amide I absorbance. Some of the bands in the 1560-1490-cm-1 spectral regions could be assigned to side-chain vibrational modes of aromatic amino acids. In the conformationally sensitive spectral region between 1680 and 1630 cm-1, bands could be attributed to peptide C = O modes because of their small (2-5 cm-1) shift in 2H2O. A similar assignment could be achieved for amide II modes because of their strong shift in 2H2O.(ABSTRACT TRUNCATED AT 250 WORDS)     

An electrochemical investigation of hemoglobin and catalase incorporated in collagen films

Collagen, an electrochemically inert protein, formed films on pyrolytic graphite (PG) electrodes, which provided a suitable microenvironment for heme proteins to transfer electron directly with the underlying electrodes. Hemoglobin (Hb) and catalase (Cat) incorporated in collagen films exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks at around -0.35 V and -0.47 V (vs. SCE) in pH 7.0 buffers, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. UV-vis spectra showed that the heme proteins in collagen films retained their near-native conformations in the medium pH range. The results of scanning electron microscopy (SEM) demonstrated that the interaction between heme proteins and collagen made the morphology of dry protein-collagen films different from the collagen films alone. The electrochemical parameters such as apparent heterogeneous electron transfer rate constant (k(s)) and formal potential (E degrees ') of the films were estimated by using square wave voltammograms (SWV) and nonlinear regression analysis. The heme protein-collagen film electrodes were also used to catalyze the reduction of nitrite, oxygen and hydrogen peroxide, indicating potential applications of the films for the fabrication of a new type of biosensor that does not use mediators.     

Direct electrochemistry and electrocatalysis of hemoglobin immobilized on carbon paste electrode by silica sol-gel film

Direct electrochemical and electrocatalytic behaviors of hemoglobin (Hb) immobilized on carbon paste electrode (CPE) by a silica sol-gel film derived from tetraethylorthosilicate (TEOS) were investigated for the first time. Hb/sol-gel film modified electrodes showed a pair of well-defined and nearly reversible cyclic voltammetric peaks for Hb Fe(III)/Fe(II) redox couple at about -0.312 V (versus Ag/AgCl) in a pH 7.0 phosphate buffer. The formal potential of Hb heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 5.0-10.0 with a slope of 49.44 mV pH(-1), which suggests that a proton transfer is accompanied with each electron transfer (ET) in the electrochemical reaction. The immobilized Hb displayed the features of peroxidase and gave excellent electrocatalytic performance to the reduction of O2, NO2(-) and H2O2. The calculated apparent Michaelis-Menten constant was 8.98 x 10(-4)M, which indicated that there was a large catalytic activity of Hb immobilized on CPE by sol-gel film toward H2O2. In comparison with other electrodes, the chemically modified electrodes, used in this direct electrochemical study of Hb, are easy to be fabricated and rather inexpensive. Consequently, the Hb/sol-gel film modified electrode provides a convenient approach to perform electrochemical research on this kind of proteins. It also has potential use in the fabrication of the third generation biosensors and bioreactors.     

Spectroscopic characterization of mononitrosyl complexes in heme--nonheme diiron centers within the myoglobin scaffold (Fe(B)Mbs): relevance to denitrifying NO reductase

Denitrifying NO reductases are evolutionarily related to the superfamily of heme--copper terminal oxidases. These transmembrane protein complexes utilize a heme-nonheme diiron center to reduce two NO molecules to N(2)O. To understand this reaction, the diiron site has been modeled using sperm whale myoglobin as a scaffold and mutating distal residues Leu-29 and Phe-43 to histidines and Val-68 to a glutamic acid to create a nonheme Fe(B) site. The impact of incorporation of metal ions at this engineered site on the reaction of the ferrous heme with one NO was examined by UV-vis absorption, EPR, resonance Raman, and FTIR spectroscopies. UV--vis absorption and resonance Raman spectra demonstrate that the first NO molecule binds to the ferrous heme, but while the apoproteins and Cu(I)- or Zn(II)-loaded proteins show characteristic EPR signatures of S = 1/2 six-coordinate heme {FeNO}(7) species that can be observed at liquid nitrogen temperature, the Fe(II)-loaded proteins are EPR silent at ≥30 K. Vibrational modes from the heme [Fe-N-O] unit are identified in the RR and FTIR spectra using (15)NO and (15)N(18)O. The apo and Cu(I)-bound proteins exhibit ν(FeNO) and ν(NO) that are only marginally distinct from those reported for native myoglobin. However, binding of Fe(II) at the Fe(B) site shifts the heme ν(FeNO) by 17 cm(-1) and the ν(NO) by -50 cm(-1) to 1549 cm(-1). This low ν(NO) is without precedent for a six-coordinate heme {FeNO}(7) species and suggests that the NO group adopts a strong nitroxyl character stabilized by electrostatic interaction with the nearby nonheme Fe(II). Detection of a similarly low ν(NO) in the Zn(II)-loaded protein supports this interpretation.     

Active-site structure,binding and redox activity of the heme–thiolate enzyme CYP2D6 immobilized on coated Ag electrodes: a surface-enhanced resonance Raman scattering study

Surface-enhance resonance Raman scattering spectra of the heme–thiolate enzyme cytochrome P450 2D6 (CYP2D6) adsorbed on Ag electrodes coated with 11-mercaptoundecanoic acid (MUA) were obtained in various experimental conditions. An analysis of these spectra, and a comparison between them and the RR spectra of CYP2D6 in solution, indicated that the enzyme’s active site retained its nature of six-coordinated low-spin heme upon immobilization. Moreover, the spectral changes detected in the presence of dextromethorphan (a CYP2D6 substrate) and imidazole (an exogenous heme axial ligand) indicated that the immobilized enzyme also preserved its ability to reversibly bind a substrate and form a heme–imidazole complex. The reversibility of these processes could be easily verified by flowing alternately solutions of the various compounds and the buffer through a home-built spectroelectrochemical flow cell which contained a sample of immobilized protein, without the need to disassemble the cell between consecutive spectral data acquisitions. Despite immobilized CYP2D6 being effectively reduced by a sodium dithionite solution, electrochemical reduction via the Ag electrode was not able to completely reduce the enzyme, and led to its extensive inactivation. This behavior indicated that although the enzyme’s ability to exchange electrons is not altered by immobilization per se, MUA-coated electrodes are not suited to perform direct electrochemistry of CYP2D6. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Real-Time Dynamic Adsorption Processes of Cytochrome c on an Electrode Observed through Electrochemical High-Speed Atomic Force Microscopy

An understanding of dynamic processes of proteins on the electrode surface could enhance the efficiency of bioelectronics development and therefore it is crucial to gain information regarding both physical adsorption of proteins onto the electrode and its electrochemical property in real-time. We combined high-speed atomic force microscopy (HS-AFM) with electrochemical device for simultaneous observation of the surface topography and electron transfer of redox proteins on an electrode. Direct electron transfer of cytochrome c (cyt c) adsorbed on a self-assembled monolayers (SAMs) formed electrode is very attractive subject in bioelectrochemistry. This paper reports a real-time visualization of cyt c adsorption processes on an 11-mercaptoundecanoic acid-modified Au electrode together with simultaneous electrochemical measurements. Adsorbing cyt c molecules were observed on a subsecond time resolution simultaneously with increasing redox currents from cyt c using EC-HS-AFM. The root mean square roughness (R_RMS) from the AFM images and the number of the electrochemically active cyt c molecules adsorbed onto the electrode (Γ) simultaneously increased in positive cooperativity. Cyt c molecules were fully adsorbed on the electrode in the AFM images when the peak currents were steady. This use of electrochemical HS-AFM significantly facilitates understanding of dynamic behavior of biomolecules on the electrode interface and contributes to the further development of bioelectronics.     

Spectroscopic and electrochemical studies of horse myoglobin in dimethyl sulfoxide

This paper reports the first report of rapid, reversible direct electron transfer between a redox protein, specifically, horse myoglobin, and a solid electrode substrate in nonaqueous media and the spectroscopic (UV-vis, fluorescence, and resonance Raman) characterization of the relevant redox forms of myoglobin (Mb) in dimethyl sulfoxide (DMSO). In DMSO, the heme active site of metmyoglobin (metMb) appears to remain six-coordinate high-spin, binding water weakly. Changes in the UV-fluorescence spectra for metMb in DMSO indicate that the protein secondary structure has been perturbed and suggest that helix A has moved away from the heme. UV-vis and RR spectra for deoxyMb in DMSO suggest that the heme iron is six-coordinate low-spin, most likely coordinating DMSO. Addition of CO to deoxyMb in DMSO produces a single, photostable six-coordinate CO adduct. UV-vis and RR for Mb-CO in DMSO are consistent with a six-coordinate low-spin heme iron binding His93 weakly, if at all. The polarity of the distal heme pocket is comparable to that of the closed form of horse Mb-CO in aqueous solution, pH 7. Direct electron transfer between horse Mb and Au in DMSO solution was investigated by cyclic voltammetry. Mb exhibits stable and well-defined electrochemical responses that do not appear to be affected by the water content (1.3-7.5%). The electrochemical characteristics are consistent with a one-electron, quasi-reversible, diffusion-controlled charge transfer process at Au. E degrees for horse Mb in DMSO at Au is -0.241+/-0.005 V vs. NHE. The formal heterogeneous electron transfer rate constant, calculated from delta E(p) at 20 mV/s, is 1.7+/-0.5 x 10(-4) cm/s. The rate, which is unaffected by the presence of 1.3-7.5% water, is competitive with that previously reported for horse Mb in aqueous solution.     

Contribution of protein conformation to heme stereochemistry and reactivity. Low-temperature magnetic circular dichroism data

Visible and near infrared magnetic circular dichroism (MCD) spectra of heme proteins and enzymes as well as those of a protein-free heme bound to 2-methylimidazole were recorded and compared at 4.2 K in unrelaxed metastable and relaxed equilibrium heme stereochemistry. The relaxed and unrelaxed stereochemistries of a 5-coordinate ferrous heme were generated by chemical reduction of iron at room temperature before freezing the sample and by photolysis of CO or O2 complexes at 4.2 K, respectively. The results are discussed in terms of a protein contribution into energies of the Fe-N epsilon(His) and Fe-N(pyrrols) bonds and their change on a ligand binding. We observed and analyzed cases of weak (myoglobin, hemoglobin) and strong (leghemoglobin, peroxidases) constraints imposed by the protein conformation on the proximal heme stereochemistry by comparing the bond energies in proteins with those in the protoheme-(2-methylimidazole) model compound. The role of a protein moiety in modulating the ligand binding properties of leghemoglobin and the heme reactivity of horseradish peroxidase is discussed.     

The cytoplasmic heme-binding protein (PhuS) from the heme uptake system of Pseudomonas aeruginosa is an intracellular heme-trafficking protein to the delta-regioselective heme oxygenase

The uptake and utilization of heme as an iron source is a receptor-mediated process in bacterial pathogens and involves a number of proteins required for internalization and degradation of heme. In the following report we provide the first in-depth spectroscopic and functional characterization of a cytoplasmic heme-binding protein PhuS from the opportunistic pathogen Pseudomonas aeruginosa. Spectroscopic characterization of the heme-PhuS complex at neutral pH indicates that the heme is predominantly six-coordinate low spin. However, the resonance Raman spectra and global fit analysis of the UV-visible spectra show that at all pH values between 6 and 10 three distinct species are present to varying degrees. The distribution of the heme across multiple spin states and coordination number highlights the flexibility of the heme environment. We provide further evidence that the cytoplasmic heme-binding proteins, contrary to previous reports, are not heme oxygenases. The degradation of the heme-PhuS complex in the presence of a reducing agent is a result of H2O2 formed by direct reduction of molecular oxygen and does not yield biliverdin. In contrast, the heme-PhuS complex is an intracellular heme trafficking protein that specifically transfers heme to the previously characterized iron-regulated heme oxygenase pa-HO. Surface plasmon resonance experiments confirm that the transfer of heme is driven by a specific protein-protein interaction. This data taken together with the spectroscopic characterization is consistent with a protein that functions to shuttle heme within the cell.     

Structural basis for the molecular properties of cytochrome c6

This is a thorough biochemical, spectroscopic, electrochemical, and structural study of a cytochrome c(6) isolated from the filamentous green alga Cladophora glomerata. The protein sequence, elucidated using chemical and mass spectrometric techniques, features 91 amino acids and the characteristic CXXCH heme-binding motif found in c-type cytochromes. The protein is monomeric in both oxidation forms, thereby putting in question a functional role for protein dimerization. Direct electrochemical measurements established, for the first time, the kinetic and thermodynamic data for the redox process in a cytochrome c(6). In particular, the quasi-reversible and diffusion-controlled redox process is accompanied by negative enthalpy and entropy changes, resulting in an E degrees ' value of 0.352 V at 298 K. The pH-dependent properties of the oxidized protein, detected by UV-visible, NMR, and direct cyclic voltammetry, indicate the presence of two acid-base equilibria occurring in the acidic (pK(a) = 4.5) and alkaline regions (pK(a) = 9.0). NMR and electronic spectra allowed the assignment of these equilibria to deprotonation of heme propionate-7 and to replacement of the axial methionine with another ligand, respectively. The 1.3 A resolution X-ray structure of the oxidized protein, revealing a fold typical for class I cytochromes, suggests that the conserved Lys60 replaces the axial methionine at pH >9. The heme solvent accessibility is low, and no water molecules were found in the vicinity of the axial ligands of the heme Fe. A structure-based alignment of cytochromes c(6), and the direct comparison of their structures, indicate a substantial degree of identity between the tertiary structures and suggest patches involved in protein-protein interaction. In particular, the surface electrostatic potential of cytochromes c(6) features a hydrophobic region around the heme cofactor, and a backside surface rich in negative charges.     

Electrochemical, FTIR, and UV/VIS spectroscopic properties of the ba(3) oxidase from Thermus thermophilus.

The ba3 cytochrome c oxidase from Thermus thermophilus has been studied with a combined electrochemical, UV/VIS, and FTIR spectroscopic approach. Oxidative electrochemical redox titrations yielded midpoint potentials of Em1= -0.02 +/- 0.01 V and Em2 = 0.16 +/- 0.04 V for heme b and Em1 = 0.13 +/- 0.04 V and Em2 = 0.22 +/- 0.03 V for heme a(3) (vs Ag/AgCl/3 M KCl). Fully reversible electrochemically induced UV/VIS and FTIR difference spectra were obtained for the full potential step from -0. 5 to 0.5 V as well as for the critical potential steps from -0.5 to 0.1 V (heme b is fully oxidized and heme a3 remains essentially reduced) and from 0.1 to 0.5 V (heme b remains oxidized and heme a3 becomes oxidized). The difference spectra thus allow to us distinguish modes coupled to heme b and heme a3. Analogous difference spectra were obtained for the enzyme in D2O buffer for additional assignments. The FTIR difference spectra reveal the reorganization of the polypeptide backbone, perturbations of single amino acids and of hemes b and a3 upon electron transfer to/from the four redox-active centers heme b and a3, as well as CuB and CuA. Proton transfer coupled to redox transitions can be expected to manifest in the spectra. Tentative assignments of heme vibrational modes, of individual amino acids, and of secondary structure elements are presented. Aspects of the uncommon electrochemical and spectroscopic properties of the ba3 oxidase from T. thermophilus are discussed.     

A novel nitrite biosensor based on single-layer graphene nanoplatelet-protein composite film

A novel nitrite biosensor was developed through a sensing platform consisted of single-layer graphene nanoplatelet (SLGnP)-protein composite film. SLGnP with the virtues of excellent biocompatibility, conductivity and high sensitivity to the local perturbations can provide a biocompatible microenvironment for protein immobilization and a suitable electron transfer distance between electroactive centers of heme protein and electrode surface. A pair of well-defined and quasi-reversible cyclic voltammetric peaks that reflected the direct electrochemistry for ferric/ferrous couple of myoglobin (Mb) was achieved at the composite film modified electrode. Field emission scanning electron microscopy (FESEM) and ultraviolet visible spectra (UV-vis) were utilized to characterize the composite film. The results demonstrated that the morphology of the composite film was unique and the protein in the composite film retained its secondary structure similar to the native state. The composite film also displayed excellent electrocatalytic ability for the reduction of nitric oxide, which was applied to determine nitrite indirectly. It exhibited good electrochemical response to nitrite with a linear range from 0.05 to 2.5 mM and a detection limit of 0.01 mM.     

Site-specific covalent attachment of heme proteins on self-assembled monolayers

Naturally occurring hemin cofactor has been functionalized to introduce two terminal alkyne groups. This modified hemin has been successfully covalently attached to mixed self-assembled monolayers of alkanethiols and azide-terminated alkanethiols on gold electrodes using a Cu(I)-catalyzed 1,3-cycloaddition reaction. However these hemin-modified electrodes could not be used to reconstitute apomyoglobin on gold electrodes owing to the hydrophobicity of the alkane thiol self-assembled monolayer. Modification of existing techniques allowed covalent attachment of alkyne-terminated electroactive species onto mixed monolayers of azidothiols and carboxylatoalkanethiols on electrodes using the same Cu(I)-catalyzed 1,3-cycloaddition reaction. Apomyoglobin could be reconstituted using the hemin covalently attached to these hydrophilic electrodes. The electrochemical data, UV-vis absorption data, surface-enhanced resonance Raman spectroscopy data, and atomic force microscopy data indicate the presence of these modified myoglobin proteins on these electrodes. The direct attachment of the heme cofactor of these modified myoglobin proteins to the electrode allows fast electron transfer to the heme center from the electrode and affords efficient O(2)-reducing bioelectrodes under physiological conditions.