Degradation of free and sulfur-dioxide-bound acetaldehyde by malolactic lactic acid bacteria in white wine

AIMS: Acetaldehyde is the major carbonyl compound formed during winemaking and has implications for sensory and colour qualities of wines as well as for the use of the wine preservative SO(2). The current work investigated the degradation of acetaldehyde and SO(2)-bound acetaldehyde by two commercial Oenococcus oeni starters in white wine. METHODS AND RESULTS: Wines were produced by alcoholic fermentation with commercial yeast and adjusted to pH 3.3 and 3.6. While acetaldehyde was degraded rapidly and concurrently with malic acid at both pH values, SO(2)-bound acetaldehyde caused sluggish bacterial growth. Strain differences were small. CONCLUSIONS: Efficient degradation of acetaldehyde can be achieved by commercial starters of O. oeni. According to the results, the degradation of acetaldehyde could not be separated from malolactic conversion by oenococci. While this may be desirable in white winemaking, it may be necessary to delay malolactic fermentation (MLF) in order to allow for colour development in red wines. SO(2)-bound acetaldehyde itself maybe responsible for the sluggish or stuck MLF, and thus bound SO(2) should be considered next to free SO(2) in order to evaluate malolactic fermentability. SIGNIFICANCE AND IMPACT OF THE STUDY: The current study provides new results regarding the metabolism of acetaldehyde and SO(2)-bound acetaldehyde during the MLF in white wine. The information is of significance to the wine industry and may contribute to reducing the concentration of wine preservative SO(2).     

Characterisation of yeast microbiota,chemical and sensory properties of organic and biodynamic Sangiovese red wines

Wine quality is closely linked to the fermentation step, which is driven by the microbial ecology of grape and the use of selected microbial strains as well. The microbial species developing during fermentation determines the type and concentration of many substances, which contribute to the sensory properties of wine and its safety. In this view, the present work aims to characterise the yeast microbiota, chemical and sensory properties of Sangiovese red wines obtained from both biodynamic and organic agriculture. The natural yeast populations of grape musts and their evolution during spontaneous were monitored and investigated. In addition, the volatile composition, physico-chemical and safety features (ethyl-carbamate) and sensory properties of wines were evaluated. The results showed that the yeast population was mostly related to the grape management, i.e. organic or biodynamic, while the wine composition was mainly affected by the winemaking process, and then by the grape management.     

Controlling grape must fermentation in early winemaking phases: the role of electrochemical treatment

AIMS: To contribute to an understanding of the phenomena related to the effect of low electric current (LEC) in grape must fermentation during laboratory and pilot plant scale winemaking, with selected co-culture yeasts (Saccharomyces cerevisiae strain 404 and Hanseniaspora guilliermodii strain 465). METHODS AND RESULTS: LEC (10, 30, 50 and 100 mA) was applied to fresh grape must as an alternative method to the usual addition of SO2. Parameters such as polarity, treatment duration (24-96 h) and type of inoculum yeast were varied one at a time. LEC decreased the survival time and increased the death rate of H. guilliermondii strain 465 in co-cultures, whereas it did not affect the growth and survival of S. cerevisiae strain 40. A final comparison was made of the main physico-chemical parameters on wine obtained after the different tests. CONCLUSIONS: The results have demonstrated that the low voltage treatment using a pair of graphite electrodes had a positive effect on grape juice fermentation (yeast microflora) during the early stages of winemaking, even with the potential of being an alternative method to the usual addition of SO2. SIGNIFICANCE AND IMPACT OF THE STUDY: These results could be of significant importance in developing new winemaking technologies for an innovative yeast fermentation control process for 'biological wine'.     

Scaling-up in industrial winemaking using low electric current as an alternative to sulfur dioxide addition

AIMS: To better understand the outcome of employing low electric current (LEC) technology as a new preservation and alternative in wine technology, and to contribute to its development. It is used in industrial-scale winemaking with commercial yeast (Saccharomyces cerevisiae) during the grape must fermentation. METHODS AND RESULTS: LEC (200 mA, time 16 days) was applied to fresh grape must as an alternative method to the usual sulfur dioxide addition used in the industrial process; two tanks, each 30,000 l, were employed for parallel fermentations. The results show that LEC decreased the survival time and increased the death rate of apiculate yeasts, whereas it did not affect the growth and survival of S. cerevisiae. A comparison was made of the main chemical and sensory parameters of the wines obtained. CONCLUSIONS: The results have demonstrated that the low-voltage treatment had a positive effect on the grape juice fermentation (yeast microflora) during the early stages of winemaking. SIGINIFICANCE AND IMPACT OF THE STUDY: These results could be of significant importance in developing, for 'biological wine', new winemaking technologies for an innovative control process of yeast fermentation.     

Timing of malolactic fermentation inoculation in Shiraz grape must and wine: influence on chemical composition

Malolactic fermentation (MLF) is an integral step in red winemaking, which in addition to deacidifying wine can also influence the composition of volatile fermentation-derived compounds with concomitant affects on wine sensory properties. Long-established winemaking protocols for MLF induction generally involve inoculation of bacteria starter cultures post alcoholic fermentation, however, more recently there has been a trend to introduce bacteria earlier in the fermentation process. For the first time, this study shows the impact of bacterial inoculation on wine quality parameters that define red wine, including wine colour and phenolics, and volatile fermentation-derived compounds. This study investigates the effects of inoculating Shiraz grape must with malolactic bacteria at various stages of alcoholic fermentation [beginning of alcoholic fermentation (co-inoculation, with yeast), mid-alcoholic fermentation, at pressing and post alcoholic fermentation] on the kinetics of MLF and wine chemical composition. Co-inoculation greatly reduced the overall fermentation time by up to 6 weeks, the rate of alcoholic fermentation was not affected by the presence of bacteria and the fermentation-derived wine volatiles profile was distinct from wines produced where bacteria were inoculated late or post alcoholic fermentation. An overall slight decrease in wine colour density observed following MLF was not influenced by the MLF inoculation regime. However, there were differences in anthocyanin and pigmented polymer composition, with co-inoculation exhibiting the most distinct profile. Differences in yeast and bacteria metabolism at various stages in fermentation are proposed as the drivers for differences in volatile chemical composition. This study demonstrates, with an in-depth analysis, that co-inoculation of yeast and bacteria in wine fermentation results in shorter total vinification time and produces sound wines, thus providing the opportunity to stabilise wines more rapidly than traditional inoculation regimes permit and thereby reducing potential for microbial spoilage.     

Evidence of different fermentation behaviours of two indigenous strains of Saccharomyces cerevisiae and Saccharomyces uvarum isolated from Amarone wine

Aims:  To explain the role of Saccharomyces cerevisiae and Saccharomyces uvarum strains (formerly Saccharomyces bayanus var. uvarum ) in wine fermentation.
Methods and Results:  Indigenous Saccharomyces spp. yeasts were isolated from Amarone wine (Italy) and analysed. Genotypes were correlated to phenotypes: Melibiose⁻ and Melibiose⁺ strains displayed a karyotype characterized by three and two bands between 225 and 365 kb, respectively. Two strains were identified by karyotype analysis (one as S. cerevisiae and the other as S. uvarum ). The technological characterization of these two strains was conducted by microvinifications of Amarone wine. Wines differed by the contents of ethanol, residual sugars, acetic acid, glycerol, total polysaccharides, ethyl acetate, 2-phenylethanol and anthocyanins. Esterase and β-glucosidase activities were assayed on whole cells during fermentation at 13° and 20°C. Saccharomyces uvarum displayed higher esterase activity at 13°C, while S. cerevisiae displayed higher β-glucosidase activity at both temperatures.
Conclusions:  The strains differed by important technological and qualitative traits affecting the fermentation kinetics and important aroma components of the wine.
Significance and Impact of the Study:  The contribution of indigenous strains of S. cerevisiae and S. uvarum to wine fermentation was ascertained under specific winemaking conditions. The use of these strains as starters in a winemaking process could differently modulate the wine sensory characteristics.     

Simultaneous yeast–bacteria inoculum. A feasible solution for the management of oenological fermentation in red must with low nitrogen content

The simultaneous inoculum of yeasts and bacteria is a feasible solution for improving fermentation in wines with a harsh chemical composition, capable of inhibiting microbial activity. Considering the risk of wine spoilage due to lactic bacteria, co-inoculum is suggested in white wines with a low pH. However, climate change has also caused problems in achieving malolactic fermentation in red wines, due to the high concentration of ethanol and the low nutrient content. In this work, 5 pairs of commercial oenological starters were tested in simultaneous fermentation, using 4 red musts with a low nitrogen content, and compared with a traditional winemaking process. The simultaneous inoculum caused a slowdown in the activity of yeasts, although no problems in the accomplishment of alcoholic fermentations were observed. More reliable malolactic fermentation was performed in the co-inoculum trials, while, in traditional winemaking, some failures in the degradation of malic acid were observed. Microbiological analyses agreed with these observations. No differences were found in yeast density during alcoholic fermentation, demonstrating the absence of negative interaction between the yeast and the bacteria. However, simultaneous fermentation is not without risks; the highest increases of acetic acid were noted in the co-inoculum trials. The addition of yeast and bacteria to must with a serious lack of nutrients would appear to be a promising alternative to traditional fermentation; however, careful control of the chemical composition of must is mandatory to obtain reliable microbiological activity in the first stages of winemaking.     

Inventory and monitoring of wine microbial consortia

The evolution of the wine microbial ecosystem is generally restricted to Saccharomyces cerevisiae and Oenococcus oeni, which are the two main agents in the transformation of grape must into wine by acting during alcoholic and malolactic fermentation, respectively. But others species like the yeast Brettanomyces bruxellensis and certain ropy strains of Pediococcus parvulus can spoil the wine. The aim of this study was to address the composition of the system more precisely, identifying other components. The advantages of the polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) approach to wine microbial ecology studies are illustrated by bacteria and yeast species identification and their monitoring at each stage of wine production. After direct DNA extraction, PCR-DGGE was used to make the most exhaustive possible inventory of bacteria and yeast species found in a wine environment. Phylogenetic neighbor-joining trees were built to illustrate microbial diversity. PCR-DGGE was also combined with population enumeration in selective media to monitor microbial changes at all stages of production. Moreover, enrichment media helped to detect the appearance of spoilage species. The genetic diversity of the wine microbial community and its dynamics during winemaking were also described. Most importantly, our study provides a better understanding of the complexity and diversity of the wine microbial consortium at all stages of the winemaking process: on grape berries, in must during fermentation, and in wine during aging. On grapes, 52 different yeast species and 40 bacteria could be identified. The diversity was dramatically reduced during winemaking then during aging. Yeast and lactic acid bacteria were also isolated from very old vintages. B. bruxellensis and O. oeni were the most frequent.     

Multidrug resistance as a dominant molecular marker in transformation of wine yeast

Pure wine yeast cultures are increasingly used in winemaking to perform controlled fermentations and produce wine of reproducible quality. For the genetic manipulation of natural wine yeast strains dominant selective markers are obviously useful. Here we demonstrate the successful use of the mutated PDR3 gene as a dominant molecular marker for the selection of transformants of prototrophic wine yeast Saccharomyces cerevisiae. The selected transformants displayed a multidrug resistance phenotype that was resistant to strobilurin derivatives and azoles used to control pathogenic fungi in agriculture and medicine, respectively. Random amplification of DNA sequences and electrophoretic karyotyping of the host and transformed strains after microvinification experiments resulted in the same gel electrophoresis patterns. The chemical and sensory analysis of experimental wines proved that the used transformants preserved all their useful winemaking properties indicating that the pdr3-9 allele does not deteriorate the technological properties of the transformed wine yeast strain.     

Isolation and clonal pre-selection of enological Saccharomyces

The aim of the present study was to perform a fast pre-selection from a great number of wine yeasts using a simple phenotypic-based methodology that allows many different strains to be simultaneously tested. A total of 150 elliptic yeasts, isolated from must and wine from black grapes of a distinctive Italian variety, were studied. Yeasts were identified to genus level by assessing their ability to ferment glucose and their production of spores on acetate agar. The Saccharomyces strains were seeded on BiGGY agar to determine their H(2)S production, on calcium carbonate agar to test their acetic acid production, and on grape-skin agar and on grape-seed agar to assess their interaction with phenolic compounds. The Saccharomyces strains were also examined for fermentative vigor after 2 d or 7 d both with and without the addition of 100 mg L(-1) of SO(2) in must at 20 degrees brix and pH 3.20. At the end of fermentation, the wines produced by the 18 best yeasts were analyzed and the strains were studied for additional biochemical and technological characteristics. The resistance of the strains to simultaneous acid-stress and osmotic-stress was studied carrying out in duplicate winemaking tests in must at 30 degrees brix and pH 2.60. A remarkable heterogeneity among the 150 autochthonous yeasts studied was demonstrated. The phenotypical biodiversity is particularly interesting for several technological characteristics useful in winemaking, such as fermentation vigor, acetic acid production and malic acid content of the wines. The vast majority of the elliptic wine yeasts isolated did not show suitable characteristics, so only 18 strains, 12% of the total, remained for the final tests. Many of the strains that had passed the preliminary screenings revealed some defects when they were studied for fermentation performance, both in standard winemaking and under stressors. Two strains exhibited particularly interesting performances: one strain for winemaking of normal musts and the other for winemaking of musts from dried grapes or under stressful conditions.     

Kluyveromyces wickerhamii killer toxin: purification and activity towards Brettanomyces/Dekkera yeasts in grape must

Brettanomyces/Dekkera yeasts have been identified as part of the grape yeast flora. They are well known for colonizing the cellar environmental and spoiling wines, causing haze, turbidity and strong off-flavours in wines and enhancing the volatile acidity. As the general practices applied to combat Brettanomyces/Dekkera yeasts are not particularly appropriate during wine ageing and storage, a biological alternative to curtailing their growth would be welcomed in winemaking. In this study, we investigated the Kluyveromyces wickerhamii killer toxin (Kwkt) that is active against Brettanomyces/Dekkera spoilage yeasts. Purification procedures allowed the identification of Kwkt as a protein with an apparent molecular mass of 72 kDa and without any glycosyl residue. Interestingly, purified Kwkt has fungicidal effects at low concentrations under the physicochemical conditions of winemaking. The addition of 40 and 80 mg L(-1) purified Kwkt showed efficient antispoilage effects, controlling both growth and metabolic activity of sensitive spoilage yeasts. At these two killer toxin concentrations, compounds known to contribute to the 'Brett' character of wines, such as ethyl phenols, were not produced. Thus, purified Kwkt appears to be a suitable biological strategy to control Brettanomyces/Dekkera yeasts during fermentation, wine ageing and storage.     

Selection and hybridization of wine yeasts for improved winemaking properties: Fermentation rate and aroma productivity

Three strains out of thirty-one wine yeasts (Saccharomyces cerevisiae) were selected for their good winemaking properties (fermentation rate, tolerance of sulfur dioxide, aroma productivity, wine quality) and genetic markers (KHR killer activity, galactose assimilation), and used for hybridization by spore to spore mating. Of the twelve hybrids produced, two, Hy17-108 (RIFY 1001 × RIFY 1067) and Hy41-308 (RIFY 1001 × RIFY 1065), were selected on the basis of a fermentation test. In experimental winemaking the two hybrids demonstrated improved aroma productivity for higher alcohols, aromatic esters and/or fatty acids, while their fermentation rate was nearly the same as that of the parental strains.     

Introducing a New Breed of Wine Yeast: Interspecific Hybridisation between a Commercial Saccharomyces cerevisiae Wine Yeast and Saccharomyces mikatae

Interspecific hybrids are commonplace in agriculture and horticulture; bread wheat and grapefruit are but two examples. The benefits derived from interspecific hybridisation include the potential of generating advantageous transgressive phenotypes. This paper describes the generation of a new breed of wine yeast by interspecific hybridisation between a commercial Saccharomyces cerevisiae wine yeast strain and Saccharomyces mikatae, a species hitherto not associated with industrial fermentation environs. While commercially available wine yeast strains provide consistent and reliable fermentations, wines produced using single inocula are thought to lack the sensory complexity and rounded palate structure obtained from spontaneous fermentations. In contrast, interspecific yeast hybrids have the potential to deliver increased complexity to wine sensory properties and alternative wine styles through the formation of novel, and wider ranging, yeast volatile fermentation metabolite profiles, whilst maintaining the robustness of the wine yeast parent. Screening of newly generated hybrids from a cross between a S. cerevisiae wine yeast and S. mikatae (closely-related but ecologically distant members of the Saccharomyces sensu stricto clade), has identified progeny with robust fermentation properties and winemaking potential. Chemical analysis showed that, relative to the S. cerevisiae wine yeast parent, hybrids produced wines with different concentrations of volatile metabolites that are known to contribute to wine flavour and aroma, including flavour compounds associated with non-Saccharomyces species. The new S. cerevisiae x S. mikatae hybrids have the potential to produce complex wines akin to products of spontaneous fermentation while giving winemakers the safeguard of an inoculated ferment.     

A breeding strategy to harness flavor diversity of Saccharomyces interspecific hybrids and minimize hydrogen sulfide production

Industrial food-grade yeast strains are selected for traits that enhance their application in quality production processes. Wine yeasts are required to survive in the harsh environment of fermenting grape must, while at the same time contributing to wine quality by producing desirable aromas and flavors. For this reason, there are hundreds of wine yeasts available, exhibiting characteristics that make them suitable for different fermentation conditions and winemaking practices. As wine styles evolve and technical winemaking requirements change, however, it becomes necessary to improve existing strains. This becomes a laborious and costly process when the targets for improvement involve flavor compound production. Here, we demonstrate a new approach harnessing preexisting industrial yeast strains that carry desirable flavor phenotypes - low hydrogen sulfide (H(2) S) production and high ester production. A low-H(2) S Saccharomyces cerevisiae strain previously generated by chemical mutagenesis was hybridized independently with two ester-producing natural interspecies hybrids of S.?cerevisiae and Saccharomyces kudriavzevii. Deficiencies in sporulation frequency and spore viability were overcome through use of complementary selectable traits, allowing successful isolation of several novel hybrids exhibiting both desired traits in a single round of selection.     

Bacterial spoilage of wine and approaches to minimize it

Bacteria are part of the natural microbial ecosystem of wine and play an important role in winemaking by reducing wine acidity and contributing to aroma and flavour. Conversely, they can cause numerous unwelcome wine spoilage problems, which reduce wine quality and value. Lactic acid bacteria, especially Oenococcus oeni, contribute positively to wine sensory characters, but other species, such as Lactobacillus sp. and Pediococcus sp can produce undesirable volatile compounds. Consequences of bacterial wine spoilage include mousy taint, bitterness, geranium notes, volatile acidity, oily and slimy-texture, and overt buttery characters. Management of wine spoilage bacteria can be as simple as manipulating wine acidity or adding sulfur dioxide. However, to control the more recalcitrant bacteria, several other technologies can be explored including pulsed electric fields, ultrahigh pressure, ultrasound or UV irradiation, and natural products, including bacteriocins and lysozyme.     

Wine flavor and aroma

The perception of wine flavor and aroma is the result of a multitude of interactions between a large number of chemical compounds and sensory receptors. Compounds interact and combine and show synergistic (i.e., the presence of one compound enhances the perception of another) and antagonistic (a compound suppresses the perception of another) interactions. The chemical profile of a wine is derived from the grape, the fermentation microflora (in particular the yeast Saccharomyces cerevisiae), secondary microbial fermentations that may occur, and the aging and storage conditions. Grape composition depends on the varietal and clonal genotype of the vine and on the interaction of the genotype and its phenotype with many environmental factors which, in wine terms, are usually grouped under the concept of “terroir” (macro, meso and microclimate, soil, topography). The microflora, and in particular the yeast responsible for fermentation, contributes to wine aroma by several mechanisms: firstly by utilizing grape juice constituents and biotransforming them into aroma- or flavor-impacting components, secondly by producing enzymes that transform neutral grape compounds into flavor-active compounds, and lastly by the de novo synthesis of many flavor-active primary (e.g., ethanol, glycerol, acetic acid, and acetaldehyde) and secondary metabolites (e.g., esters, higher alcohols, fatty acids). This review aims to present an overview of the formation of wine flavor and aroma-active components, including the varietal precursor molecules present in grapes and the chemical compounds produced during alcoholic fermentation by yeast, including compounds directly related to ethanol production or secondary metabolites. The contribution of malolactic fermentation, ageing, and maturation on the aroma and flavor of wine is also discussed.     

Field-flow fractionation as analytical technique for the characterization of dry yeast: correlation with wine fermentation activity

Important oenological properties of wine depend on the winemaking yeast used in the fermentation process. There is considerable controversy about the quality of yeast, and a simple and cheap analytical methodology for quality control of yeast is needed. Gravitational field flow fractionation (GFFF) was used to characterize several commercial active dry wine yeasts from Saccharomyces cerevisiae and Saccharomyces bayanus and to assess the quality of the raw material before use. Laboratory-scale fermentations were performed using two different S. cerevisiae strains as inocula, and GFFF was used to follow the behavior of yeast cells during alcoholic fermentation. The viable/nonviable cell ratio was obtained by flow cytometry (FC) using propidium iodide as fluorescent dye. In each experiment, the amount of dry wine yeast to be used was calculated in order to provide the same quantity of viable cells. Kinetic studies of the fermentation process were performed controlling the density of the must, from 1.071 to 0.989 (20/20 density), and the total residual sugars, from 170 to 3 g/L. During the wine fermentation process, differences in the peak profiles obtained by GFFF between the two types of commercial yeasts that can be related with the unlike cell growth were observed. Moreover, the strains showed different fermentation kinetic profiles that could be correlated with the corresponding fractograms monitored by GFFF. These results allow optimism that sedimentation FFF techniques could be successfully used for quality assessment of the raw material and to predict yeast behavior during yeast-based bioprocesses such as wine production.     

Detection of abnormal processes of wine fermentation by support vector machines

The early detection of problematic fermentations is one of the main problems that appear in winemaking processes, due to the significant impacts in wine quality and utility. This situation is specially important in Chile because is one of the top ten wine production countries. In last years, different methods coming from Multivariate Statistics and Computational Intelligence have been applied to solve this problem. In this work we detect normal and problematic (sluggish and stuck) wine fermentations applying the support vector machine method with three different kernels: linear, polynomial and radial basis function. For the training algorithm, we use the same database of 22 wine fermentation studied in [1, 2] that contains approximately 22,000 points, considering the main chemical variables measured in this kind of processes: total sugar, alcoholic degree and density. Our main result establishes that the SVM method with third degree polynomial and radial basis kernels predict correctly 88 and 85 % respectively. The fermentation behavior results have been obtained for a 80–20 % training/testing percentage configuration and a time cutoff of 48 h.     

Microbiology of the malolactic fermentation: Molecular aspects

Abstract Malolactic fermentation conducted by lactic acid bacteria follows alcoholic fermentation during winemaking, and several positive effects make it indispensable for most wines. Research has focused on the growth and physiology of lactic acid bacteria in wine; resulting in the design of malolactic starter cultures. Future work on these starters will concentrate on aromatic changes as additional criteria for strain selection. Although the main features of the malolactic enzyme and its gene are known, the detailed mechanism of the malolactic reaction remains unclear. Cloning and expression of this activity in enological strains of Saccharomyces cereuisiae might be one of the next most important advances in the control of malic acid degradation in wine.     

Starter cultures as biocontrol strategy to prevent Brettanomyces bruxellensis proliferation in wine

Brettanomyces bruxellensis is a common and significant wine spoilage microorganism. B. bruxellensis strains generally detain the molecular basis to produce compounds that are detrimental for the organoleptic quality of the wine, including some classes of volatile phenols that derive from the sequential bioconversion of specific hydroxycinnamic acids such as ferulate and p-coumarate. Although B. bruxellensis can be detected at any stage of the winemaking process, it is typically isolated at the end of the alcoholic fermentation (AF), before the staring of the spontaneous malolactic fermentation (MLF) or during barrel aging. For this reason, the endemic diffusion of B. bruxellensis leads to consistent economic losses in the wine industry. Considering the interest in reducing sulfur dioxide use during winemaking, in recent years, biological alternatives, such as the use of tailored selected yeast and bacterial strains inoculated to promote AF and MLF, are actively sought as biocontrol agents to avoid the “Bretta” character in wines. Here, we review the importance of dedicated characterization and selection of starter cultures for AF and MLF in wine, in order to reduce or prevent both growth of B. bruxellensis and its production of volatile phenols in the matrix.