Biphasic effects of alcohols on the phase transition of poly(L-lysine) between alpha-helix and beta-sheet conformations.

Poly(L-lysine) exists as a random-coil at neutral pH, an alpha-helix at alkaline pH, and a beta-sheet when the alpha-helix poly(L-lysine) is heated. The present Fourier-transform infrared (FTIR) study showed that short-chain alcohols (methanol, ethanol, and 2-propanol) partially transformed alpha-helix poly(L-lysine) to beta-sheet when their concentrations were low. At higher concentrations, however, these alcohols reversed the reaction, and the alcohol-induced beta-sheet was transformed back to alpha-helix structure. The reversal occurred at 1.40 M methanol, 0.96 M ethanol, and 0.55 M 2-propanol. The alcohol effects on the secondary structure were further investigated by circular dichroism (CD) on the thermally induced beta-sheet poly(L-lysine). Methanol, ethanol, and 1-propanol, but not 1-butanol, shifted the negative mean-residue ellipticity at 217 nm of the beta-sheet poly(L-lysine) to the positive side at low concentrations of the alcohols and to the negative side at high concentrations. With 1-butanol, only the positive-side shift was observed. The positive-side shift at low concentrations of alcohols indicates enhancement of the hydrophobic interactions among the side chains of the polypeptide in the beta-sheet conformation. The negative-side shift indicates a partial transformation to alpha-helix. The shift from the positive to negative side occurred at 7.1 M methanol, 4.6 M ethanol, and 3.1 M 1-propanol. The alcohol concentrations for the beta-to-alpha transition were higher in the CD study than in the IR study.(ABSTRACT TRUNCATED AT 250 WORDS)     

Conformational transitions of a synthetic DNA poly(dA-dU). poly(dA-dU) in concentrated solutions of caesium fluoride

Chiroptical properties of poly(dA-dU).poly(dA-dU) were studied in concentrated NaCl and CsF solutions to reveal the role of the alternating B conformation in the CsF-induced alternating B-X conformational transition of poly(dA-dT).poly(dA-dT). Poly(dA-dU).poly(dA-dU) has been chosen for this purpose because it has, instead of the alternating B conformation, a regular conformation like poly(dG-dC).poly(dG-dC) in low-salt solution. It was found that poly(dA-dU).poly(dA-dU) did not assume that Z form at high NaCl concentrations but exhibited extensive CsF-induced changes in the circular dichroism spectra like poly(dA-dT).poly(dA-dT). The changes of reflect two consecutive two-state conformational transitions of the polynucleotide, both taking place with fast kinetics and low cooperativity. The transition were interpreted as involving the regular and alternating B conformation at lower CsF concentrations and the alternating B and X conformation at higher CsF concentrations. A comparison of the behaviour of poly(dA-dU).poly(dA-dU) and poly(dA-dT).poly(dA-dT) in CsF solutions demonstrates that the thymine methyl groups promote the X form but are not crucial for its existence. On the other hand, the alternating B conformation appears to be the inevitable starting structure for DNA isomerization into the X form.     

Conformation of poly(L-homoarginine)

Poly(L -arginine) assumes the α-helix in the presence of the tetrahedral-type anions or some polyanions by forming the “ringed-structure bridge” between guanidinium groups and anions which is stabilized by a pair of hydrogen bonds and electrostatic interaction [Ichimura, S., Mita, K. & Zama, M. (1978) Biopolymers 17 , 2769–2782; Mita, K., Ichimura, S. & Zama, M. (1978) Biopolymers 17 , 2783–2798]. This paper describes the parallel CD studies on the conformational effects on poly (L -homoarginine) of various mono-, di-, polyvalent anions and some polyanions, as well as alcohol and sodium dodecylsulfate. The random coil to α-helix transition of poly(L -homoarginine) occurred only in NaClO₄ solution or in the presence of high content of ethanol or methanol. The divalent and polyvalent anions of the tetrahedral type (SO, HPO, and P₂O), which are strong α-helix-forming agents for poly(L -arginine), failed to induce the α-helical conformation of poly(L -homoarginine). By complexing with poly(L -glutamic acid) or with polyacrylate, which is also a strong α-helix-forming agent for poly(L -arginine), poly(L -homoarginine) only partially formed the α-helical conformation. Monovalent anions (OH^?, Cl^?, F^?, and H₂PO) did not change poly(L -homoarginine) to the α-helix, and in the range of pH 2–11, the polypeptide remained in an unordered conformation. In sodium dodecylsulfate, poly(L -homoarginine) exhibited the remarkably enlarged CD spectrum of an extended conformation, while poly(L -arginine) forms the α-helix by interacting with the agent. Thus poly(L -homoarginine), compared with poly(L -arginine), has a much lower ability to form the α-helical conformation by interacting with anions. The stronger hydrophobicity of homoarginine residue in comparison with the arginine residue would provide unfavorable conditions to maintain the α-helical conformation.     

Effect of basic oligopeptides on the B-Z transition of poly(dG-dC). poly(dG-dC) in water-methanol solutions

The effect of basic oligopeptides (Lys-Ala-Ala)n (n = 1-5, 10) and (Lys-Leu-Ala)n (n = 1-4) on the B-Z transition of poly(dG-dC).poly(dG-dC) in water-methanol solutions was investigated using CD and uv spectroscopy. In the absence of peptides, the concentration of methanol at the midpoint of the B-Z transition is 64% at 25 degrees C. The transition is temperature dependent and the B conformation is preferred at higher temperatures. All peptides tested shift the midpoint of the B-Z transition to lower concentrations of methanol. For shorter peptides this effect increases with an increasing number of monomeric units, showing the importance of the number of positive charges in the peptide molecule. Al conditions of low methanol content, the trimer and tetramer of the (Lys-Leu-Ala)n series have a greater effect on the B-Z transition than the corresponding oligomers of the (Lys-Ala-Ala)n series. This indicates an important influence of the presence of hydrophobic groups in the peptide side chains on the binding. In the presence of peptides, the B-Z transition is also temperature dependent and the B conformation is preferred at higher temperatures. The addition of peptides results in an increase of the transition midpoint and of the transition width. These parameters were used for the calculation of the transition enthalpy delta HB-Z in 65% methanol, which is -1.15 +/- 0.25 kcal/base pair. Since the van't Hoff enthalpy delta HVH calculated from the temperature dependence of the B-Z transition in the absence of peptides is -130 kcal/mol, the length of the cooperative unit is about 110 base pairs. The results suggest that the mechanism of Z-DNA induction is similar but not identical with that involved in the action of metal cations in aqueous solution.     

Molten globule state of human placental cystatin (HPC) at low pH conditions and the effects of trifluoroethanol (TFE) and methanol.

Acid-induced conformational changes were studied in human placental cystatin (HPC) in terms of circular dichroism (CD) spectroscopy, the binding of hydrophobic dye 1-anilinonapthalene-8-sulphonic acid (ANS), and intrinsic fluorescence measurements. Our results show the formation of an acid-induced molten globule state at pH 2.0, with significant secondary and tertiary interactions that resemble the native state, exposed hydrophobic regions and the effects of trifluoroethanol (TFE) and methanol in conversion of the acid-denatured state of HPC to the alcohol-induced state, which is characterized by increased helical content, disrupted tertiary structure, and the absence of hydrophobic clusters. Alcohol-induced formation of alpha-helical structures at pH 2.0 is evident from the increase in the ellipticity values at 222 nm, with native-like secondary structural features at 40% TFE. The increase in helical content was observed up to 80% TFE concentration. The ability of TFE (40%) to refold acid-denatured HPC to native-state conformation is also supported by intrinsic and ANS fluorescence measurements.     

Spin-label studies of the pH-induced random coil to α-helix conformational transition in poly(L-lysine)

Poly(L -lysine) of various molecular weights between 2700 and 475,000 was spin-labeled. From the electron spin resonance spectra, the degree of freedom of the nitroxide was determined by calculation of the rotational correlation time as the poly(L -lysine) underwent the pH-induced random coil to α-helix conformational transition. In general, the rotational correlation time of the nitroxide increased as the pH was increased, indicating a more restricted environment for the spin label when poly(L -lysine) is deprotonated. For the high-molecular-weight poly(L -lysine) this corresponds to the formation of the α-helix and indicates that the side chain–side chain interaction and decreased segmental motion of the backbone (slightly) restricts the motion of the spin label. For the 2700-molecular-weight poly(L -lysine), previously shown not to assume a helical conformation at high pH, the increase in the rotational correlation time of the spin label indicates that the side chain–side chain interaction takes place after deprotonation but without helix formation. This may indicate that helix formation per se is not needed to produce the observed effect even with the high-molecular-weight polymers. The rotational correlation time of the spin label at a particular pH did not depend on the molecular weight of the poly(L -lysine) over the 200-fold range of molecular weights. This indicates that the rotational correlation time reflects the rotational mobility of the spin label in a localized environment and not the rotational diffusion of the entire macromolecule.     

Carrier design: Conformational studies of amino acid (X) and oligopeptide (X-DL-Alam) substituted poly(L-lysine)

The present study was undertaken to examine the influence of the reversal of the sidechain sequential order on the conformation of branched polypeptides. At the same time, the influence of the optically active amino acid joined directly to the poly (L -Lys) backbone and the DL -Ala oligomer grafted as chain-terminating fragment were separately analyzed. Therefore two sets of polypeptides were synthesized corresponding to the general formula poly [Lys-(X_i,)] (XK) and poly[Lys-(DL -Ala_m-X_i)] (AXK) when X = Ala, D -Ala, Leu, D -Leu, Phe, D -Phe, Ile, Pro, Glu.,D -Glu, or His. For coupling amino acid X to polylysine, three types of active ester methods were compared: the use of pentafluorophenyl or pentachlorophenyl ester, and the effect of the addition of an equimolar amount of 1-hydroxybenzotriazole. After cleavage of protecting groups, AXK polypeptides were synthesized by grafting short oligo (DL -Ala) chains to XK by using N-carboxy-DL -Ala anhydride. The CD measurements performed in water solutions of various pH values and ionic strengths were used for classification of the polypeptide conformations as either ordered (helical) or unordered. Different from what was observed with the unsubstituted poly (L -Lys), poly[Lys-(X_i)] type polypeptides can adopt ordered structure even under nearly physiological conditions (pH 7.3, 0.2M NaCl). These data suggest that the introduction of amino acid residue with either (ar) alkyl side chain (Ala, Leu, Phe) or negatively charged side chain (Glu) promotes markedly the formation of ordered structure. Comparison of chiroptical properties of poly [Lys- (DL -Ala_m-X_i)] and of poly [Lys- (X_i)] reveals that side-chain interactions play an important role in the stabilization of ordered solution conformation of AXK type branched polypeptides. The results give rather conclusive evidence that not only hydrophobic interactions, but also ionic attraction, can be involved in the formation and stabilization of helical conformation of branched polypeptides. © 1993 John Wiley & Sons, Inc.     

Conformation of poly(l-glutamic acid) at the air/water interface

The conformation of the monolayer of poly(l-glutamic acid) on subsolutions of different pH values was studied by the film-balance technique, obtaining surface pressure measurements, together with polarized infrared spectroscopy and Raman spectroscopy. The monolayers of poly(l-glutamic acid) gave different surface pressure-area curves on subsolutions of various pH values. It was found that the conformation of poly(l-glutamic acid) monolayer spread at the air/water interface differs from that in solution. It can be presumed that poly(l-glutamic acid) in a monolayer is in the form of an α-helix at pH 2.0, in the β-form at pH 3.5 and in an ‘intramolecular’ heterogeneous conformation (consisting of a random coil and an α-helix) at pH 4.0.     

Conformational lability of poly(dG-m5dC):poly(dG-m5dC).

The remarkable conformational lability of poly(dG-m5dC):poly(dG-m5dC) is demonstrated by the observation of an acid-mediated conformational hysteresis. An acid-mediated Z conformation that exists in solutions containing low sodium concentrations that would normally favor the B conformation is described in this report. This Z conformation is reached by an acid-base titration of a B-poly(dG-m5dC):poly(dG-m5dC) solution which is not far from the B-Z transition midpoint. The resulting Z conformation is thermally very stable, with direct melting into single strands at approximately 100 degrees C. In contrast, the B form DNA, initially in solutions of the same ionic strength but without exposure to acidic pH, exhibits a biphasic melting profile, with conversion into the Z form (with high cooperativity) prior to an eventual denaturation into single strands at around 100 degrees C. Cooling experiments reveal that such biphasic transitions are quite reversible. The transition midpoint for the thermally poised B to Z transformation depends strongly on the NaCl concentration and varies with sample batch. The acid-mediated Z form binds ethidium more weakly than its B counterpart, and the ethidium induced Z to B conversion occurs in a step-wise (non-allosteric) fashion without the requirement of a threshold concentration. The acid-mediated as well as the thermally poised Z conformations are reversed by the addition of EDTA, suggesting the involvement of trace amounts of multivalent metal ions.     

Interaction of drugs with Z-DNA: cooperative binding of actinomycin D or actinomine to the left-handed forms of poly(dG-dC).poly(dG-dC) and poly(dG-m5dC).poly(dG-m5dC) reverses the conformation of the helix

The interaction of actinomycin D and actinomine with poly(dG-dC).poly(dG-dC) and poly(dG-m5dC).poly(dG-m5dC) under B- and Z-form conditions has been investigated by optical and phase partition techniques. Circular dichroism data show that the conformation at the binding site is right-handed, even though adjacent regions of the polymer have a left-handed conformation. Actinomycin D binds in a cooperative manner to poly(dG-dC).poly(dG-dC) under both B-form and Z-form conditions. Analysis of the circular dichroism data shows that 5 +/- 1 base pairs of left-handed poly(dG-dC).poly(dG-dC) in 4.4 M NaCl switch to a right-handed conformation for each bound actinomycin D. When the left-handed form of poly(dG-dC).poly(dG-dC) is stabilized by the presence of 40 microM [Co(NH3)6]Cl3, 25 +/- 5 base pairs switch from a left-handed to a right-handed conformation for each bound actinomycin D. Actinomine binds cooperatively to left-handed poly(dG-dC).poly(dG-dC) in 40 microM [Co(NH3)6]Cl3 and to left-handed poly(dG-m5dC).poly(dG-m5dC) in 2 mM MgCl2. Actinomine does not bind to left-handed poly(dG-dC).poly(dG-dC) in 4.4 M NaCl at concentrations as high as 100 microM. Each bound actinomine converts 11 +/- 3 base pairs of left-handed poly(dG-dC).poly(dG-dC) in 40 microM [Co(NH3)6]Cl3 and 7 +/- 2 base pairs of left-handed poly(dG-m5dC).poly(dG-m5dC) in 2 mM MgCl2. The binding isotherm data also indicate that the binding site has a right-handed conformation.(ABSTRACT TRUNCATED AT 250 WORDS)     

Monoclonal antibodies specific for poly(dG) X poly(dC) and poly(dG) X poly(dm5C)

Most duplex DNAs that are in the "B" conformation are not immunogenic. One important exception is poly(dG) X poly(dC), which produces a good immune response even though, by many criteria, it adopts a conventional right-handed helix. In order to investigate what features are being recognized, monoclonal antibodies were prepared against poly(dG) X poly(dC) and the related polymer poly(dG) X poly(dm5C). Jel 72, which is an immunoglobulin G, binds only to poly(dG) X poly(dC), while Jel 68, which is an immunoglobulin M, binds approximately 10-fold more strongly to poly(dG) X poly(dm5C) than to poly(dG) X poly(dC). For both antibodies, no significant interaction could be detected with any other synthetic DNA duplexes including poly[d(Gm5C)] X poly[d(Gm5C)] in both the "B" and "Z" forms, poly[d(Tm5Cm5C)] X poly[d(GGA)], and poly[d(TCC)] X poly[d(GGA)], poly(dI) X poly(dC), or poly(dI) X poly(dm5C). The binding to poly(dG) X poly(dC) was inhibited by ethidium and by disruption of the DNA duplex, confirming that the antibodies were not recognizing single-stranded or multistranded structures. Furthermore, Jel 68 binds significantly to phage XP-12 DNA, which contains only m5C residues and will precipitate this DNA in the absence of a second antibody. The results suggest that (dG)n X (dm5C)n sequences in natural DNA exist in recognizably distinct conformations.     

Patterning poly(organophosphazenes) for selective cell adhesion applications

Five polyphosphazenes with different hydrophilicites were synthesized and screened in vitro. The purpose was to identify unique types of polymeric substrates that distinctly favored or markedly prevented cellular adhesion. The SK-N-BE(2c) human neuroblastoma cell line, utilized for its electrogenic responses, was used to test this differential adhesion. In particular, the objective was to specifically culture this cell line in a highly selective pattern. Each candidate polymer was cast into films and plated with neuroblastoma cells for 3 days. The polyphosphazene materials which showed negative cellular adhesive properties (-CAPs) were poly[bis(trifluoroethoxy)phosphazene] (TFE) and poly[bis(methoxyethoxyethoxy)phosphazene] (MEEP). The polyphosphazenes which showed positive cellular adhesive properties (+CAPs) were poly[(methoxyethoxyethoxy)(1.0)(carboxylatophenoxy)(1.0)phosphazene] (PMCPP), poly[(methoxyethoxyethoxy)(1.0)(cinnamyloxy)(1.0)phosphazene] (PMCP), and poly[(methoxyethoxyethoxy)(1.0)(p-methylphenoxy)(1.0)phosphazene] (PMMP). To test cellular selectivity, films of -CAP and +CAP were copatterned onto glass substrates. The micropatterned films were plated with SK-N-BE(2c) neuroblastoma cells for one week. The results showed that neuroblastoma cells adhere selectively (over 60%) to the +CAP microfeatures. We also showed that multiple properties can be achieved with a single material and that we can use TFE as both a -CAP and an insulation layer and PMCP as a conductive +CAP layer.     

Photoresponsive polypeptides: Photochromism and conformation of poly (L-glutamic acid) containing spiropyran units

Spirobenzopyran units were bound to the side chains of poly (L -glutamic acid) and partially methylated poly(L -glutamate)s. The modified polymers were found to exhibit “reverse photochromism” in hexafluoro-2-propanol (HFP), so the samples kept in the dark were characterized by an intense absorption band in the visible range of the spectrum, which was completely erased upon exposure to sunlight or irradiation at 500–550 nm. The CD spectra showed that the macromolecules adopted a random coil conformation in the dark, whereas the bleached solutions after exposure to light displayed the typical CD pattern of the α-helix. The back reaction in the dark was accompanied by the progressive decrease of the helix content and recovery of the original disordered conformation. The photoinduced conformational changes resulted in large and reversible viscosity variations. When spiropyran side chains were converted to “spiropyran salts” of trifluoroacetic acid, the system was still photochromic, but the macromolecules were disordered both in the dark and light conditions. However, when appropriate amounts of methanol were added as a cosolvent to the HFP solutions, the system responded to light, giving reversible variations of the α-helix content. Irradiation at appropriate solvent compositions allowed modulation of the extent of the photoresponse. © 1993 John Wiley & Sons, Inc.     

Comparison between poly(dG-dC).poly(dG-dC) and DNA modified by cis-diamminedichloroplatinum (II): immunological and spectroscopic studies

The importance of the base composition and of the conformation of nucleic acids in the reaction with the drug cis-diamminedichloroplatinum(II) has been studied by competition experiments between the drug and several double-stranded polydeoxyribonucleotides. Binding to poly(dG).poly(dC) is larger than to poly (dG-dC).poly(dG-dC). There is no preferential binding in the competition between poly(dG-dC).poly(dG-dC), poly(dA-dC).poly(dG-dT) and poly(dA-dG).poly(dC-dT). In the competition between poly(dG-dC).poly (dG-dC) (B conformation) and poly(dG-br5dC).poly(dG-br5dC) (Z conformation), the drug binds equally well to both polynucleotides. In natural DNA, modification of guanine residues in (GC)n.(GC)n sequences by the drug has been revealed by the inhibition of cleavage of these sequences by the restriction enzyme BssHII. By means of antibodies to platinated poly(dG-dC), it is shown that some of the adducts formed in platinated poly(dG-dC) are also formed in platinated pBR322 DNA. The type of adducts recognized the antibodies is not known. Thin layer chromatography of the products after chemical and enzymatic hydrolysis of platinated poly(dG-dC) suggests that interstrand cross-links are formed. Finally, the conformations of poly(dG-dC) modified either by cis-diamminedichloroplatinum(II) or by trans-diamminedichloroplatinum (II) have been compared by circular dichroism. Both the cis-isomer and the trans-isomer stabilize the Z conformation when they bind to poly(dG-m5dC) in the Z conformation. When they bind to poly(dG-m5dC) in the B conformation, the conformations of poly(dG-m5dC) modified by the cis or the trans-isomer are different. Moreover, the cis-isomer facilitates the B form-Z form transition of the unplatinated regions while the trans-isomer makes it more difficult.     

Immunological and spectroscopic studies of poly(dG-dC).poly(dG-dC) modified by cis-diamminedichloroplatinum(II)

The conformational changes induced by the binding of cis-diamminedichloroplatinum(II) to poly(dG-dC).poly(dG-dC) have been studied by reaction with specific antibodies, by circular dichroism and 31P nuclear magnetic resonance. Polyclonal and monoclonal antibodies to Z-DNA bind to platinated poly(dG-dC).poly(dG-dC) at low and high ionic strength. Antibodies elicited in rabbits immunized with the platinated polynucleotide bind to double stranded polynucleotides known to adopt the Z-conformation. At low and high ionic strength the circular dichroism spectrum of platinated poly(dG-dC).poly(dG- dC) does not resemble that of poly(dG-dC).poly(dG-dC) (B or Z conformation). At low ionic strength, the characteristic 31P nuclear magnetic resonance spectrum of the Z-form is not detected. It appears only at high ionic strength, as a component of a more complex spectrum.     

High-resolution study of the helix–coil transition of poly(L-glutamic acid): Spectroscopic data correlation and the discovery of a new transition

This article reports on both (1) the precision and capability of a computerized multidimensional spectrophotometric system recently developed in our laboratory and (2) the high-resolution study of the helix–coil transition of poly(L-glutamic acid)[poly(Glu)], especially with regard to the discovery of an overlooked transition which is attributable to order–disorder rearrangement of the poly(Glu) side chain in the α-helical conformation. This study was made possible by the high performance of the system used. The simultaneous and continuous measurement of the circular dichroism, the absorbance and light-scattering intensity, and the pH titration curve of poly(Glu) in aqueous salt solution was carried out under continuous scanning of pH ranging from 8 to 2. Besides the well-known random coil to α-helix transition that occurs at about pH 5.5, a highly cooperative transition, which is indicated as a small but definite step in several spectral dimensions, is observed for the first time at pH 4.3. The transition is ascribed to an order–disorder conversion of the side chain on the α-helix backbone.     

Azobenzene-modified poly(l-glutamic acid) (AZOPLGA): its conformational and photodynamic properties

Azobenzene-modified poly(l-glutamic acid) (AZOPLGA) polymers with 22 and 35 mol % of azo chromophores in the side chains have been synthesized by condensing 4-methoxy-4'-aminoazobenzene and poly(l-glutamic acid). These polymers have been characterized by NMR, FT-IR, and UV-visible spectroscopic techniques. The conformational features of the polymer backbone chains in the films that were cast from the polymer solutions prepared in different solvents have been investigated by circular dichroism spectroscopy. Experimental data suggested that the thermal cis-trans relaxation and photoinduced birefringence, which are related to the azo chromophores in the side chains of polymer, are not affected by the conformations of polymer backbones. However, the modulations of the surface relief gratings, the result of photoinduced mass transport process, recorded on these polymers are sensitive to polymer main chain conformation, as well as the degree of functionalization.     

Synthesis of poly(L-Tyr-L-Glu-L-Ala-Gly) and poly(L-Glu-L-Lys-L-Ala) and their circular dichroism spectra in aqueous solution

Two sequential polypeptides, poly(O-benzyl-L -Tyr-γ-benzyl-L -Glu-L -Ala-Gly) and poly(ε-benzyloxycarbonyl-L -Lys-L -Glu-L -Ala), were synthesized, the former by the pentachlorophenyl ester of the tetrapeptide monomer and the latter by the azide of the tripeptide monomer. After deprotection and dialysis, poly(L -Tyr-L -Glu-L -Ala-Gly) was obtained in 71% yield and had a molecular weight of 53,000. The circular dichroism spectra (CD) of the polymer at pH's 7.2, 10.5, and 11.8 and of oligomers and of the monomer at pH 7.2 indicated that the polymer exists in an α-helical conformation. After deprotection, poly(L -Lys-L -Glu-L -Ala) was obtained in 37% yield and had a molecular weight of 3000. The CD spectra of the polymer at pH 7.2 and 2.8, and of the monomer at pH 7.2, indicated that the polymer is in a randomly coiled configuration.     

Conformation of poly(L-lysine) homologs in solution

The effect of the number of methylene groups in the side chains on the conformation of polypeptides is assessed for three poly(L -lysine) homologs with R = –(CH₂)_nNH₂. Circular dichroism studies show a pH-induced helix–coil transition in 0.05 M KCl with midpoints at 9.6, 9.0, and 8.7 for n = 5, 6, and 7, respectively, as compared with 10.1 for (Lys)_x (n = 4). Homologs with n = 6 and 7 could be partially helical even when the side groups are fully charged (with n = 7, the compound is highly aggregated above pH 9.1). Thus, the longer the number of methylene groups the more stable is the helical conformation of these homologs. Potentiometric titration of the n = 5 homolog gives a ΔG° of ?310 cal/mol (residue) for the uncharged coil-to-helix transition at 25°C. The corresponding ΔH° and ΔS° are ?1740 cal/mol (residue) and ?4.8 e.u./mol (residue). Unlike (Lys)_x, the uncharged helix-to-β transition is slow and incomplete even after heating at 80°C for 1 hr. Addition of methanol enhances the helical formation in neutral solution with midpoints at 72, 52, and 27% methanol (v/v) for n = 5, 6, and 7, respectively [cf. 88% for (Lys)_x]. Addition of sodium dodecyl sulfate induces a coil-to-helix transition for all three homologs in contrast with the β form of (Lys)_x under similar conditions.     

Dielectric studies of aqueous solutions of poly(L-glutamic acid)

The dielectric features of poly(L -glutamic acid) are studied by the Fourier synthesized pseudorandom noise method in a time domain combined with a four-electrode cell. Polymer concentration dependence, the effect of the solvent viscosity, salt effects, and pH dependence are studied concomitantly with measurements of CD. A helix-to-coil transition occurs near pH 5.6 for a salt-free solution; at higher pH values, the polymer has an ionized random-coil conformation, and at lower pH, it has a deionized α-helical conformation. When it is in the ionized random-coil conformation, with the usual features of an electrolytic polymer, the solution shows a relaxation spectrum with a large dielectric increment at low frequencies. In the deionized α-helical state, no distinct relaxation curves are obtained, which does not deny the existence of a permanent peptide dipole. The pH dependence of the dielectric increment does not mainly correspond to the conformational change from helix to coil, but rather corresponds to the change of chain expansion on account of a charge–charge interaction under low ionic strength, which is conceived of by a viscosity measurement.