Functional Analysis of the Cucumisin Propeptide as a Potent Inhibitor of Its Mature Enzyme

Cucumisin is a subtilisin-like serine protease (subtilase) that is found in the juice of melon fruits (Cucumis melo L.). It is synthesized as a preproprotein consisting of a signal peptide, NH₂-terminal propeptide, and 67-kDa protease domain. We investigated the role of this propeptide (88 residues) in the cucumisin precursor. Complementary DNAs encoding the propeptides of cucumisin, two other plant subtilases (Arabidopsis ARA12 and rice RSP1), and bacterial subtilisin E were expressed in Escherichia coli independently of their mature enzymes. The cucumisin propeptide strongly inhibited cucumisin in a competitive manner with a K_i value of 6.2 ± 0.55 nm. Interestingly, cucumisin was also strongly inhibited by ARA12 and RSP1 propeptides but not by the subtilisin E propeptide. In contrast, the propeptides of cucumisin, ARA12, and RSP1 did not inhibit subtilisin. Deletion analysis clearly showed that two hydrophobic regions, Asn³²–Met³⁸ and Gly⁹⁷–Leu¹⁰³, in the cucumisin propeptide were important for its inhibitory activity. Site-directed mutagenesis also confirmed the role of a Val³⁶-centerd hydrophobic cluster within the Asn³²–Met³⁸ region in cucumisin inhibition. Circular dichroism spectroscopy revealed that the cucumisin propeptide had a secondary structure without a cognate protease domain and that the thermal unfolding of the propeptide at 90 °C was only partial and reversible. A tripeptide, Ile³⁵-Val³⁶-Tyr³⁷, in the Asn³²–Met³⁸ region was thought to contribute toward the formation of a proper secondary structure necessary for cucumisin inhibition. This is the first report on the function and structural information of the propeptide of a plant serine protease.     

Engineering a Disulfide Bond in the Lid Hinge Region of Rhizopus chinensis Lipase: Increased Thermostability and Altered Acyl Chain Length Specificity

The key to enzyme function is the maintenance of an appropriate balance between molecular stability and structural flexibility. The lid domain which is very important for “interfacial activation” is the most flexible part in the lipase structure. In this work, rational design was applied to explore the relationship between lid rigidity and lipase activity by introducing a disulfide bond in the hinge region of the lid, in the hope of improving the thermostability of R. chinensis lipase through stabilization of the lid domain without interfering with its catalytic performance. A disulfide bridge between F95C and F214C was introduced into the lipase from R. chinensis in the hinge region of the lid according to the prediction of the “Disulfide by Design” algorithm. The disulfide variant showed substantially improved thermostability with an eleven-fold increase in the t _1/2 value at 60°C and a 7°C increase of T _m compared with the parent enzyme, probably contributed by the stabilization of the geometric structure of the lid region. The additional disulfide bond did not interfere with the catalytic rate (k _cat) and the catalytic efficiency towards the short-chain fatty acid substrate, however, the catalytic efficiency of the disulfide variant towards pNPP decreased by 1.5-fold probably due to the block of the hydrophobic substrate channel by the disulfide bond. Furthermore, in the synthesis of fatty acid methyl esters, the maximum conversion rate by RCLCYS reached 95% which was 9% higher than that by RCL. This is the first report on improving the thermostability of the lipase from R. chinensis by introduction of a disulfide bond in the lid hinge region without compromising the catalytic rate.     

The role of disulfide bond in hyperthermophilic endocellulase

The hyperthermophilic endocellulase, EGPh (glycosyl hydrolase family 5) from Pyrococcus horikoshii possesses 4 cysteine residues forming 2 disulfide bonds, as identified by structural analysis. One of the disulfide bonds is located at the proximal region of the active site in EGPh, which exhibits a distinct pattern from that of the thermophilic endocellulase EGAc (glycosyl hydrolase family 5) of Acidothermus cellulolyticus despite the structural similarity between the two endocellulases. The structural similarity between EGPh and EGAc suggests that EGPh possesses a structure suitable for changing the position of the disulfide bond corresponding to that in EGAc. Introduction of this alternative disulfide bond in EGPh, while removing the original disulfide bond, did not result in a loss of enzymatic activity but the EGPh was no longer hyperthermostable. These results suggest that the contribution of disulfide bond to hyperthermostability at temperature higher than 100 °C is restrictive, and that its impact is dependent on the specific structural environment of the hyperthermophilic proteins. The data suggest that the structural position and environment of the disulfide bond has a greater effect on high-temperature thermostability of the enzyme than on the potential energy of the dihedral angle that contributes to disulfide bond cleavage.     

The role of short-range Cys171-Cys178 disulfide bond in maintaining cutinase active site integrity: A molecular dynamics simulation

Understanding structural determinants in enzyme active site integrity can provide a good knowledge to design efficient novel catalytic machineries. Fusarium solani pisi cutinase with classic triad Ser-His-Asp is a promising enzyme to scrutinize these structural determinants. We performed two MD simulations: one, with the native structure, and the other with the broken Cys171-Cys178 disulfide bond. This disulfide bond stabilizes a turn in active site on which catalytic Asp175 is located. Functionally important H-bonds and atomic fluctuations in catalytic pocket have been changed. We proposed that this disulfide bond within active site can be considered as an important determinant of cutinase active site structural integrity.     

Crystal structure of a feruloyl esterase belonging to the tannase family: A disulfide bond near a catalytic triad

Feruloyl esterase (FAE) catalyzes the hydrolysis of the ferulic and diferulic acids present in plant cell wall polysaccharides, and tannase catalyzes the hydrolysis of tannins to release gallic acid. The fungal tannase family in the ESTHER database contains various enzymes, including FAEs and tannases. Despite the importance of FAEs and tannases in bioindustrial applications, three‐dimensional structures of the fungal tannase family members have been unknown. Here, we determined the crystal structure of FAE B from Aspergillus oryzae (AoFaeB), which belongs to the fungal tannase family, at 1.5 Å resolution. AoFaeB consists of a catalytic α/β‐hydrolase fold domain and a large lid domain, and the latter has a novel fold. To estimate probable binding models of substrates in AoFaeB, an automated docking analysis was performed. In the active site pocket of AoFaeB, residues responsible for the substrate specificity of the FAE activity were identified. The catalytic triad of AoFaeB comprises Ser203, Asp417, and His457, and the serine and histidine residues are directly connected by a disulfide bond of the neighboring cysteine residues, Cys202 and Cys458. This structural feature, the “CS‐D‐HC motif,” is unprecedented in serine hydrolases. A mutational analysis indicated that the novel structural motif plays essential roles in the function of the active site. Proteins 2014; 82:2857–2867. © 2014 Wiley Periodicals, Inc.     

Structural Analysis of a Glycoside Hydrolase Family 11 Xylanase from Neocallimastix patriciarum: INSIGHTS INTO THE MOLECULAR BASIS OF A THERMOPHILIC ENZYME*

The catalytic domain of XynCDBFV, a glycoside hydrolase family 11 (GH11) xylanase from ruminal fungus Neocallimastix patriciarum previously engineered to exhibit higher specific activity and broader pH adaptability, holds great potential in commercial applications. Here, the crystal structures of XynCDBFV and its complex with substrate were determined to 1.27–1.43 Å resolution. These structures revealed a typical GH11 β-jelly-roll fold and detailed interaction networks between the enzyme and ligands. Notably, an extended N-terminal region (NTR) consisting of 11 amino acids was identified in the XynCDBFV structure, which is found unique among GH11 xylanases. The NTR is attached to the catalytic core by hydrogen bonds and stacking forces along with a disulfide bond between Cys-4 and Cys-172. Interestingly, the NTR deletion mutant retained 61.5% and 19.5% enzymatic activity at 55 °C and 75 °C, respectively, compared with the wild-type enzyme, whereas the C4A/C172A mutant showed 86.8% and 23.3% activity. These results suggest that NTR plays a role in XynCDBFV thermostability, and the Cys-4/Cys-172 disulfide bond is critical to the NTR-mediated interactions. Furthermore, we also demonstrated that Pichia pastoris produces XynCDBFV with higher catalytic activity at higher temperature than Escherichia coli, in which incorrect NTR folding and inefficient disulfide bond formation might have occurred. In conclusion, these structural and functional analyses of the industrially favored XynCDBFV provide a molecular basis of NTR contribution to its thermostability.     

The structure of an archaeal viral integrase reveals an evolutionarily conserved catalytic core yet supports a mechanism of DNA cleavage in trans

The first structure of a catalytic domain from a hyperthermophilic archaeal viral integrase reveals a minimal fold similar to that of bacterial HP1 integrase and defines structural elements conserved across three domains of life. However, structural superposition on bacterial Holliday junction complexes and similarities in the C-terminal tail with that of eukaryotic Flp suggest that the catalytic tyrosine and an additional active-site lysine are delivered to neighboring subunits in trans. An intramolecular disulfide bond contributes significant thermostability in vitro.     

Properties of a New Plant Serine Protease Cucumisin

Cucumisin [EC 3.4.21.25] was coupled to cyanogen bromide-activated Sephayose 4B. The specific activity of the immobilized cucumisin was 41% of that of the soluble cucumisin toward casein. The immobilized enzyme was more stable against alkaline inactivation or heat than the soluble enzyme. In using affinity chromatography on a column of the immobilized cucumisin-Sepharose, cucumisin inhibitor was not obtained from potent sources of proteinase inhibitors, such as pig kidney and liver, avian and turtle egg-whites, or soybeans.     

Substrate Specificity of Cucumisin on Synthetic Peptides

The substrate specificity of cucumisin [EC 3.4.21.25] was identified by the use of the synthetic peptide substrates Leu_m-Pro-Glu-Ala-Leu_n (m=0-4, n=0-3). Neither Pro-Glu-Ala-Leu (m=0) nor Leu-Pro-Glu-Ala (n=0) was cleaved by cucumisin, however other analogus peptides were cleaved between Glu-Ala. The hydrolysis rates of Leu_m-Pro-Glu-Ala-Leu increased with the increase of m=1 to 2 and 3, but was however, essentially same with the increase of m=3 to 4. Similarly, the hydrolysis rates of Leu-Leu-Pro-Glu-Ala-Leu_n increased with the increase of n=0 to 1 and 2, but was essentially same with the increase of n=2 to 3. Then, it was concluded that cucumisin has a S₅-S₃′ subsite length. In order to identify the substrate specificity at P₁ position, Leu-Leu-Pro-X-Ala-Leu (X; Gly, Ala, Val, Leu, Ile, Pro, Asp, Glu, Lys, Arg, Asn, Gln, Phe, Tyr, Ser, Thr, Met, Trp, His) were synthesized and digested by cucumisin. Cucumisin showed broad specificity at the P₁ position. However, cucumisin did not cleave the C-terminal side of Gly, Ile, Pro, and preferred Leu, Asn, Gln, Thr, and Met, especially Met. Moreover, the substrates, Leu-Leu-Pro-Glu-Y-Leu (Y; Gly, Ala, Ser, Leu, Val, Glu, Lys, Phe) were synthesized and digested by cucumisin. Cucumisin did not cleave the N-terminal side of Val but preferred Gly, Ser, Ala, and Lys especially Ser. The specificity of cucumisin for naturally occurring peptides does not agree strictly with the specificity obtained by synthetic peptides at the P₁ or P₁′ position alone, but it becomes clear that the most of the cleavage sites on naturally occurring peptides by cucumisin contain suitable amino acid residues at P₁ and (or) P₁′ positions. Moreover, cucumisin prefers Pro than Leu at P₂ position, indicating that the specificity at P₂ position differs from that of papain.     

Structure of the Mycosin-1 Protease from the Mycobacterial ESX-1 Protein Type VII Secretion System

Mycobacteria use specialized type VII (ESX) secretion systems to export proteins across their complex cell walls. Mycobacterium tuberculosis encodes five nonredundant ESX secretion systems, with ESX-1 being particularly important to disease progression. All ESX loci encode extracellular membrane-bound proteases called mycosins (MycP) that are essential to secretion and have been shown to be involved in processing of type VII-exported proteins. Here, we report the first x-ray crystallographic structure of MycP1(24–407) to 1.86 Å, defining a subtilisin-like fold with a unique N-terminal extension previously proposed to function as a propeptide for regulation of enzyme activity. The structure reveals that this N-terminal extension shows no structural similarity to previously characterized protease propeptides and instead wraps intimately around the catalytic domain where, tethered by a disulfide bond, it forms additional interactions with a unique extended loop that protrudes from the catalytic core. We also show MycP1 cleaves the ESX-1 secreted protein EspB from both M. tuberculosis and Mycobacterium smegmatis at a homologous cut site in vitro.     

Molecular cloning and characterization of prohormone convertase 1 gene in abalone (Haliotis diversicolor supertexta)

Prohormone convertases (PCs) are calcium-dependent serine endoproteases of the subtilisin family that play a key role in the posttranslational processing of precursors for bioactive peptides. In this study, the cDNA of PC1 from abalone (Haliotis diversicolor supertexta) was cloned and sequenced. The PC1 cDNA consisted of 2216 bp with an open reading frame of 2010 bp encoding a 670 amino acid peptide. Comparative structural analysis revealed that abalone PC1 shared high similarity and identity with most PC counterparts. The profile of deduced peptide of PC1 was composed of an N-terminal signal peptide, a prosegment domain, a catalytic domain and a P domain, which were common in many species. Sequence analysis indicated that the abalone PC1 was highly conserved in catalytic domain, including three conserved serine catalytic signatures that comprised a catalytic triad active center. Also conserved were the potential cleavage site for release of the mature peptide, a cognate integrin binding site RGD in P domain, and four cysteine residues involved in forming an intrachain disulfide bridge. To further investigate the functions of PC1 in abalone, real-time quantitative PCR was performed to determine the expression level of this gene at three different reproduction stages (i.e. pre-, during- and post-breeding). Results indicated that PC1 was expressed throughout the three stages but the expression levels varied with the timepoints and different tissues in abalone. The expression levels of PC1 in digestive gland were much higher than those of the gonad. In female abalone, the expression of PC1 was higher at pre-breeding and during-breeding stages (P < 0.05), and the expression declined at the subsequent stage. Whereas, the level of PC1 in male individual did not exhibit a significant difference in various reproduction stages. Also, the natural enzyme activity of PC1 partially exhibited a similar tendency with the mRNA expression. According to the results, it can be concluded that PC1 gene is involved in the abalone reproduction process (e.g. spawning or sperming). PC1 is a potential prohormone processing enzyme and it may play a critical role in abalone physiological processes related to reproduction.     

A role for His-160 in peroxide inhibition of S. cerevisiae S-formylglutathione hydrolase: Evidence for an oxidation sensitive motif

While the general catalytic mechanism of the widespread serine hydrolase superfamily has been documented extensively, much less is known about its varied modes of functional modulation within biological systems. Under oxidizing conditions, inhibition of Saccharomyces cerevisiae S-formylglutathione hydrolase (SFGH, homologous to human esterase D) activity is attributable to a cysteine (Cys-60) adjacent to its catalytic triad and approximately 8.0 Å away from the Oγ of the nucleophilic serine. Cys-60 is oxidized to a sulfenic acid in the structure of the Paraoxon-inhibited W197I variant (PDB 3C6B). The structural snap-shot captured an unstable reversibly oxidized state, but it remained unclear as to whether the oxidation occurred before, during, or after the reaction with the organophosphate inhibitor. To determine if the oxidation of Cys-60 was functionally linked to ester hydrolysis, we used kinetic analysis and site-directed mutagenesis in combination with X-ray crystallography. The essential nature of Cys-60 for oxidation is demonstrated by the C60S variant, which is not inhibited by peroxide in the presence or absence of substrate. In the presence of substrate, the rate of inhibition of the WT SFGH by peroxide increases 14-fold, suggesting uncompetitive behavior linking oxidation to ester hydrolysis. Here we found one variant, H160I, which is activated by peroxide. This variant is activated at comparable rates in the presence or absence of substrate, indicating that the conserved His-160 is involved in the inhibitory mechanism linking ester hydrolysis to the oxidation of Cys-60. Copper chloride inhibition experiments show that at least two metal ions bind and inhibit both WT and H160I. A structure of the Paraoxon-inhibited W197I variant soaked with CuCl₂ shows density for one metal ion per monomer at the N-terminus, and density around the Cys-60 sulfur consistent with a sulfinic acid, Cys-SO₂. A Dali structural similarity search uncovered two other enzymes (Bacillus subtilis RsbQ, 1WOM and Clostridium acetobutylicum Lipase–esterase, 3E0X) that contain a similar Cys adjacent to a catalytic triad. We speculate that the regulatory motif uncovered is conserved in some D-type esterases and discuss its structural similarities in the active site of human protective protein (HPP; also known as Cathepsin A).     

An intramolecular disulfide bond is required for the thermostability of methyl parathion hydrolase, OPHC2

OPHC2, a methyl parathion hydrolase (MPH) from Pseudomonas pseudoalcaligenes C2-1 (CGMCC 1150), can degrade a wide range of organophosphate pesticides. Compared with other MPHs, OPHC2 exhibits high thermostability. Its thermostability mechanism, however, remains unknown. In the present study, sequence analysis demonstrated that two cysteines (Cys110 and Cys146) exist in OPHC2, but not in other MPHs. The three-dimensional structural model of OPHC2 performed by computer-assisted homology modelling revealed a potential stacking network with residues Cys110 and Cys146, which probably formed an intramolecular disulfide bond. Furthermore, both sodium dodecyl sulphate-polyacrylamide gel electrophoresis and thiol-titration analyses indicated that OPHC2 contains a disulfide bond. Substitution of the disulfide bond-forming cysteines with alanine, leucine or methionine residues substantially decreased the thermostability of OPHC2, suggesting that disulfide bond formation affects conformational stability. These results, combined with three-dimensional structural modelling, demonstrated that the formation of a C110-C146 disulfide bond may stabilise the conformation of OPHC2, contributing to its thermostability.     

Substrate specificity of cucumisin on synthetic peptides

The substrate specificity of cucumisin [EC 3.4.21.25] was identified by the use of the synthetic peptide substrates Leu(m)-Pro-Glu-Ala-Leu(n) (m = 0-4, n = 0-3). Neither Pro-Glu-Ala-Leu (m = 0) nor Leu-Pro-Glu-Ala (n = 0) was cleaved by cucumisin, however other analogus peptides were cleaved between Glu-Ala. The hydrolysis rates of Leu(m)-Pro-Glu-Ala-Leu increased with the increase of m = 1 to 2 and 3, but was however, essentially same with the increase of m = 3 to 4. Similarly, the hydrolysis rates of Leu-Leu-Pro-Glu-Ala-Leu(n) increased with the increase of n = 0 to 1 and 2, but was essentially same with the increase of n = 2 to 3. Then, it was concluded that cucumisin has a S5-S3' subsite length. In order to identify the substrate specificity at P1 position, Leu-Leu-Pro-X-Ala-Leu (X; Gly, Ala, Val, Leu, Ile, Pro, Asp, Glu, Lys, Arg, Asn, Gln, Phe, Tyr, Ser, Thr, Met, Trp, His) were synthesized and digested by cucumisin. Cucumisin showed broad specificity at the P1 position. However, cucumisin did not cleave the C-terminal side of Gly, Ile, Pro, and preferred Leu, Asn, Gln, Thr, and Met, especially Met. Moreover, the substrates, Leu-Leu-Pro-Glu-Y-Leu (Y; Gly, Ala, Ser, Leu, Val, Glu, Lys, Phe) were synthesized and digested by cucumisin. Cucumisin did not cleave the N-terminal side of Val but preferred Gly, Ser, Ala, and Lys especially Ser. The specificity of cucumisin for naturally occurring peptides does not agree strictly with the specificity obtained by synthetic peptides at the P1 or P1' position alone, but it becomes clear that the most of the cleavage sites on naturally occurring peptides by cucumisin contain suitable amino acid residues at P1 and (or) P1' positions. Moreover, cucumisin prefers Pro than Leu at P2 position, indicating that the specificity at P2 position differs from that of papain.     

De novo design and evolution of artificial disulfide isomerase enzymes analogous to the bacterial DsbC

The Escherichia coli disulfide isomerase, DsbC is a V-shaped homodimer with each monomer comprising a dimerization region that forms part of a putative peptide-binding pocket and a thioredoxin catalytic domain. Disulfide isomerases from prokaryotes and eukaryotes exhibit little sequence homology but display very similar structural organization with two thioredoxin domains facing each other on top of the dimerization/peptide-binding region. To aid the understanding of the mechanistic significance of thioredoxin domain dimerization and of the peptide-binding cleft of DsbC, we constructed a series of protein chimeras comprising unrelated protein dimerization domains fused to thioredoxin superfamily enzymes. Chimeras consisting of the dimerization domain and the alpha-helical linker of the bacterial proline cis/trans isomerase FkpA and the periplasmic oxidase DsbA gave rise to enzymes that catalyzed the folding of multidisulfide substrate proteins in vivo with comparable efficiency to E. coli DsbC. In addition, expression of FkpA-DsbAs conferred modest resistance to CuCl2, a phenotype that depends on disulfide bond isomerization. Selection for resistance to elevated CuCl2 concentrations led to the isolation of FkpA-DsbA mutants containing a single amino acid substitution that changed the active site of the DsbA domain from CPHC into CPYC, increasing the similarity to the DsbC active site (CGYC). Unlike DsbC, which is resistant to oxidation by DsbB-DsbA and does not normally catalyze disulfide bond formation under physiological conditions, the FkpA-DsbA chimeras functioned both as oxidases and isomerases. The engineering of these efficient artificial isomerases delineates the key features of catalysis of disulfide bond isomerization and enhances our understanding of its evolution.     

Arabidopsis PECTIN METHYLESTERASE17 is co-expressed with and processed by SBT3.5, a subtilisin-like serine protease

Background and Aims

In Arabidopsis thaliana, the degree of methylesterification (DM) of homogalacturonans (HGs), the main pectic constituent of the cell wall, can be modified by pectin methylesterases (PMEs). In all organisms, two types of protein structure have been reported for PMEs: group 1 and group 2. In group 2 PMEs, the active part (PME domain, Pfam01095) is preceded by an N-terminal extension (PRO part), which shows similarities to PME inhibitors (PMEI domain, Pfam04043). This PRO part mediates retention of unprocessed group 2 PMEs in the Golgi apparatus, thus regulating PME activity through a post-translational mechanism. This study investigated the roles of a subtilisin-type serine protease (SBT) in the processing of a PME isoform.

Methods

Using a combination of functional genomics, biochemistry and proteomic approaches, the role of a specific SBT in the processing of a group 2 PME was assessed together with its consequences for plant development.

Key Results

A group 2 PME, AtPME17 (At2g45220), was identified, which was highly co-expressed, both spatially and temporally, with AtSBT3.5 (At1g32940), a subtilisin-type serine protease (subtilase, SBT), during root development. PME activity was modified in roots of knockout mutants for both proteins with consequent effects on root growth. This suggested a role for SBT3.5 in the processing of PME17 in planta. Using transient expression in Nicotiana benthamiana, it was indeed shown that SBT3.5 can process PME17 at a specific single processing motif, releasing a mature isoform in the apoplasm.

Conclusions

By revealing the potential role of SBT3.5 in the processing of PME17, this study brings new evidence of the complexity of the regulation of PMEs in plants, and highlights the need for identifying specific PME–SBT pairs.     

Sulfolobus solfataricus thiol redox puzzle: characterization of an atypical protein disulfide oxidoreductase

Protein disulfide oxidoreductases (PDOs) are proteins involved in disulfide bond formation playing a crucial role in adaptation to extreme environment. This paper reports the functional and structural characterization of Sso1120, a PDO from the hyperthermophilic archaeon Sulfolobus solfataricus. The protein was expressed in Escherichia coli and purified to homogeneity. The functional characterization showed that the enzyme has reductase activity, as tested by insulin assay, but differently from the other PDOs, it does not present isomerase activity. In addition it is able to form a redox couple with the thioredoxin reductase that could be used in undiscovered pathways. The protein revealed a melting point of around 90 °C in CD spectroscopy-monitored thermal denaturation and high denaturant resistance. The X-ray crystallographic structure was solved at 1.80 Å resolution, showing differences with respect to other PDOs and an unexpected similarity with the N-terminal domain of the alkyl hydroperoxide reductase F component from Salmonella typhimurium. On the basis of the reported data and of bioinformatics and phylogenetic analyses, a possible involvement of this atypical PDO in a new antioxidant system of S. solfataricus has been proposed.     

Structure and dynamics of Trichoderma harzianum Cel7B suggest molecular architecture adaptations required for a wide spectrum of activities on plant cell wall polysaccharides

Cellulases from glycoside hydrolase family 7 (GH7) play crucial roles in plant lignocellulose deconstruction by fungi, but structural information available for GH7 fungal endoglucanases is limited when compared to the number of known sequences in the family. Here, we report the X-ray structure of the glycosylated catalytic domain (CD) of Trichoderma harzianum endoglucanase, ThCel7B, solved and refined at 2.9 Å resolution. Additionally, our extensive molecular dynamics simulations of this enzyme in complex with a variety of oligosaccharides provide a better understanding of its promiscuous hydrolytic activities on plant cell wall polysaccharides. The simulations demonstrate the importance of the hydrogen bond between substrate O2 hydroxyl in the subsite −1 and a side chain of catalytic Glu196 which renders ThCel7B capable to catalytically cleave cello and xylooligosaccharides, but not mannooligosaccharides. Moreover, detailed structural analyses and MD simulations revealed an additional binding pocket, suitable for accommodation of oligosaccharide decorations and/or substrates with mixed glycoside bonds that abuts onto the binding cleft close to subsite +2.