A new approach for studying correlations between the chemical structure and the rheological properties in carboxymethyl cellulose

Two model sodium carboxymethyl celluloses (CMC) with similar monomer composition but with significant differences in the viscoelastic properties, that could not be assigned to variations in the average molar mass or molar mass distribution, were investigated with respect to the fraction of nonsubstituted cellulose segments in the polymers. The CMCs were hydrolyzed by a purified highly selective endoglucanase. The average molar mass and molar mass distribution of the enzyme products, as measured by size-exclusion chromatography with online multi-angle light scattering and refractive index detection (SEC/MALS/RI), revealed that the enzyme-catalyzed hydrolysis was more effective on one of the CMCs. To investigate whether this was due to a higher fraction of nonsubstituted cellulose segments in the polymer, the concentrations of nonsubstituted enzyme products, e.g., cellotetraose and cellopentaose, were measured by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). It was concluded that the two CMCs displayed significant differences in the fraction of nonsubstituted cellulose segments. Furthermore, the CMC with the strongest attractive intermolecular interactions, according to rheometry, also contained the highest fraction of nonsubstituted cellulose segments.     

Fractionation and characterization of a conjugate between a polymeric drug-carrier and the antitumor drug camptothecin

A conjugate between the antitumor drug camptothecin and the polymeric drug-carrier poly[N-(2-hydroxypropyl)methacrylamide] was synthesized and fractionated. The conjugate samples, both fractionated and unfractionated, were characterized with a multi-detector SEC system using three on-line detectors: a multi-angle light scattering photometer, a viscometer, and a refractometer. The used mobile phase (DMF + 0.01 M LiBr + 0.05 M CH(3)COOH) derives from previous experience with similar conjugates. Narrow molar mass distribution fractions of the conjugate obtained by means of a semipreparative LC system were used to derive the coefficients of the Mark-Houwink-Sakurada relationship and to check the universal calibration of the SEC system. This study has demonstrated that the conjugate elutes according to the hydrodynamic volume. Thus, a conventional SEC method that uses only an on-line refractometer detector, commercially available narrow standards, and the universal calibration is adequate for the characterization of the molar mass distribution. Also the size and the conformation of the conjugate were studied by means of the gyration radius-molar mass power law.     

Improved molecular weight analysis of streptococcal hyaluronic acid by size exclusion chromatography

Summary Four size exclusion chromatography (SEC) calibration techniques were tested for use in the molecular weight characterisation of Streptococcal Hyaluronic Acid (HA). An exponential equation, evaluated using the Hamielec method, was superior to the customary peak position method. It provided the most accurate estimates of the weight average molecular weight, Mw. The calibration was valid for HA in the range 800 – 2500 kDa, and permitted the calculation of both polydispersity and molecular weight distributions for HA from Streptococcal fermentations. This exponential calibration approach should have application in the characterisation of other large biopolymers, particularly where pore size of available SEC media is limiting.     

Direct and Indirect Methods for Molar-Mass Analysis of Fragments of the Capsular Polysaccharide ofHaemophilus influenzaeType b

Two methods are described for direct molar-mass measurement of low-molar-mass fragments obtained by oxidative cleavage of the capsular polysaccharide ofHaemophilus influenzaetype b. Absolute molar masses were determined by size-exclusion chromatography (SEC) with detection by multiangle laserlight-scattering photometry (MALLS) and differential refractometry (RI). The end-group structure of the polysaccharide fragments allowed the direct measurement of average chain length by quantitative¹H NMR, from which molar masses were derived. Variation between the molar masses obtained by the two methods ranged from 5 to 7%. When molar masses estimated by indirect methods were compared to SEC-MALLS/RI data, significant deviations were observed. Analysis by SEC with secondary calibration with dextran standards gave molar masses that exceeded the SEC-MALLS/RI data by as much as 2.5-fold. Molar masses estimated by a combination of colorimetric assays varied from the SEC-MALLS/RI data by as much as 50%. These results demonstrated the applicability and superior accuracy of the direct methods of molar-mass determination of the polysaccharide fragments.     

Initial characterization of ethyl(hydroxyethyl) cellulose using enzymic degradation and chromatographic methods

Two different ethyl(hydroxyethyl) cellulose (EHEC) samples were characterized by size-exclusion chromatography (SEC) with multiangle light scattering (MALS) detection and high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD). The aim of the study was to investigate the molar mass distribution and the heterogeneity of the substituent distribution, factors that are thought to affect the functional properties of EHEC. The presence of blocks of unsubstituted glucose units was studied by enzymic degradation of EHEC by two different endoglucanases from Trichoderma reesei. The SEC-MALS analysis of the hydrolysis products showed that both enzymes were strongly inhibited by the large number of substituents along the cellulose chain. However, as the weight-average molar mass was reduced from approximately 360,000 to 80,000 g/mol in one of the polymers and from 770,000 to 60,000 g/mol in the other polymer, it was suggested that both samples were composed of some unsubstituted regions where the enzymes got access to the glucosidic bonds. The amount of glucose released upon endoglucanase hydrolysis was determined by HPAEC-PAD, which gave information on the homogeneity of the substituent distribution. The production of unsubstituted glucose units indicated that one of the polymers had a more uneven distribution compared with the other. It was demonstrated that chemical characterization of EHEC is a complex task, which requires an analytical approach involving numerous different methods and techniques.     

Kinetic studies on the nitrite reductase of Wolinella succinogenes.

Calibration relationships were derived for cartilage proteoglycan subunit (PGS) that relate the inverse z-average hydrodynamic radius (Rs) and the weight-average Mr (Mw) to the partition coefficient (Kav.) for PGS when chromatographed on a Sepharose CL-2B column. PGS isolated from chick limb-bud chondrocyte cell cultures was fractionated chromatographically into eight pools, for which Mw and Rs were determined by total-intensity and dynamic light-scattering measurements. These data were found to be related to Kav. through the following empirical equations: log Mw = -(1.65 +/- 0.27)Kav. +(6.58 +/- 0.08); log Rs = -(0.69 +/- 0.04)Kav. +(2.75 +/- 0.01). Application of these relationships to the chromatographic data led to Mw = 1.48 X 10(6) and Rs = 38.7 nm (387 A) for the unfractionated specimens compared with values of Mw = 1.46 X 10(6) and Rs = 38.2 nm (382 A) determined by light-scattering. Our results were found to be consistent with previously proposed phenomenological models for the gel-filtration mechanism. Application of these calibration relationships to Kav. for several unfractionated specimens led to predicted values of Mw and Rs that are accurate to within 10%.     

Biochemical properties of alligator (Alligator mississippiensis) bone collagen

Acid-soluble collagen (ASC) and pepsin solubilized collagen (PSC) isolated and purified from alligator (Alligator mississippiensis) bone were studied for molecular size, amino acid profile, secondary structure, and denaturation temperature by SDS-PAGE, HPLC, circular dichroism, and viscometry. Two collagen subunits, alpha1 and alpha2 were identified by SDS-PAGE. The molecular masses for alpha1 and alpha2 chains of ASC were 124 kDa and 111 kDa, respectively. The molecular masses were 123 kDa for alpha1 and 110 kDa for alpha2 chains of the PSC preparation. The molecular masses for ([alpha1](2) alpha2) of ASC and PSC were 359 kDa and 356 kDa, respectively. The major composition of alligator bone ASC and PSC was found to be typical type I collagen. The amino acid profiles of alligator ASC and PSC were similar to amino acid profile of subtropical fish black drum (Pogonias cromis, Sciaenidae) bone. Comparison of amino acid profiles with shark cartilage PSC, showed differences in alanine, hydroxylysine, lysine, and histidine contents. The denaturation temperatures (T(d)) of alligator ASC and PSC collagen measured by viscometry were 38.1 and 38.2 degrees C, respectively. Thermal denaturation temperatures, measured by melting point using circular dichroism, were 37.6 and 37.9 degrees C, respectively. Taken together, these results suggest that alligator bone collagen may find a wide range of applications in biological research, functional foods and nutraceuticals, and biomedical and pharmaceutical research.     

Covalent immobilization of pullulanase on alginate and study of its hydrolysis of pullulan

The immobilization of pullulanase from Klebsiella pneumoniae by grafting was investigated. Pullulanase was linked after activation of alginate via a covalent bond between the amine groups of the enzyme and the carboxylic acid groups of alginate. The immobilization yield was 60%. The activity of free pullulanase and immobilized pullulanase was followed by the quantification of reducing ends by colorimetric assay and the determination of the molar masses of the hydrolyzed pullulan by SEC/MALS/DRI. Compared to free pullulanase, the kinetics is largely slowed. The evolution of the weight average molar mass of pullulan leading to high production of shorter oligosaccharides during hydrolysis is not the same as that obtained with free enzyme. Immobilized pullulanase retained 75% and 30% of its initial activity after 24 h and 14 days of incubation at 60°C, respectively while free pullulanase lost its activity after 5 h of hydrolysis at the same temperature. The kinetic parameters of immobilized pullulanase were also investigated by isothermal titration calorimetry (ITC). The affinity of immobilized enzyme to its substrate was reduced compared to the free pullulanase due to steric hindrance and chemical links. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:883–889, 2015     

Isolation, characterization and structural determination of a unique type of arabinogalactan from an immunostimulatory extract of Chlorella pyrenoidosa

An arabinogalactan was isolated from a hot water extract of freeze-dried cells of the green microalga, Chlorella pyrenoidosa. This hot water extract is a proprietary immunomodulator, with the trademark Respondintrade mark (ONC-107). The arabinogalactan was recovered from the ethanol-soluble fraction of the supernatant resulting from a process that involved controlled ethanol precipitation followed by size exclusion chromatography on Sephadex G-100, then Cetavlon precipitation. Sugar analyses, GC-MS data for (S)-2-octyl glycosides, and 1D and 2D NMR experiments established unambiguously that the repeating unit was -->2)-alpha-L-Araf-(1-->3)-[alpha-L-Araf-(1-->4)]-beta-D-Galp-(1-->. This structure does not fit into any of the known classes of arabinogalactans. SEC/MALS experiments gave a molecular mass for the arabinogalactan isolated as 47 +/- 4 kDa but the original structure was probably larger.     

Isolation and characterization of water-soluble hemicelluloses from flax shive

Partially depolymerized, water-soluble hemicelluloses were solubilized from flax shive employing hydrothermal microwave treatment and thereafter subjected to ion-exchange chromatography, enzymatic purification and/or size-exclusion chromatography (SEC). The oligo- and polysaccharide fractions thus obtained were characterized with respect to molar mass, molar mass distribution, degree of polymerization (DP) and degree of substitution with acetyl moieties (DSAc) by employing SEC in combination with MALDI-TOF mass spectrometry. The major portion of the water-soluble flax hemicellulose consisted of an O-acetyl-4-O-methylglucuronoxylan exhibiting a DPp value (i.e., peak-average DP) of 28. When the DSAc for this O-acetyl-4-O-methylglucuronoxylan was calculated on the basis of the MALDI-MS spectra obtained without and following deacetylation, a value of 0.7 was obtained. In addition, an O-acetyl-glucomannan (DPp=9, DS=0.4) and minor quantities of small neutral O-acetyl-xylooligosaccharides were also isolated from the mixture of water-soluble hemicelluloses released from the flax shive by microwave treatment.     

Periploca sepium Bunge as a model plant for rubber biosynthesis study

Periploca sepium Bunge (Chinese silk vine) is a woody climbing vine belonging to the family Asclepiadaceae. It originally comes from Northwest China. Periploca resembles the Para-rubber tree, Hevea brasiliensis, regarding a similar body plan to produce a milky exudate containing rubber latex. The Periploca plant was assessed as a rubber-producing plant by rubber structure elucidation and its molecular weight distribution. A rubber fraction purified from the milky exudate was subjected to 1H NMR analysis, and a characteristic signal derived from cis-polyisoprene was observed. In addition, when the molecular weight distribution of rubber components in the exudate was measured (using size-exclusion chromatography), the number-average molecular weight (Mn), weight-average molecular weight (Mw), and polydispersity (Mw/Mn) were estimated to be Mn = 1.3 x 10(5), Mw = 4.1 x 10(5), and Mw/Mn = 3.1, respectively. Furthermore, the presence of polyisoprene, with Mn = 4.0 x 10(4), Mw = 7.6 x 10(4), and Mw/Mn = 2.5, was also confirmed in plantlets obtained from shoots as a result of tissue culture.     

Chain conformation of sulfated derivatives of beta-glucan from sclerotia of Pleurotus tuber-regium

Six water-insoluble (1-->3)-beta-D-glucan fractions TM8-1 to TM8-6 with weight-average molecular mass Mw ranging from 5.76 to 77.4x10(4) obtained from the sclerotia of Pleurotus tuber-regium were sulfated to produce the water-soluble fractions S-TM8-1 to S-TM8-6 with Mw from 6.0 to 64.8x10(4). The degree of substitution (DS) of S-TM8 fractions was analyzed by elemental analysis (EA) to be 1.14-1.74. The 13C NMR results indicated that the C-6 was fully substituted, and C-2, C-4 were partially substituted by the sulfo-groups. The Mw and the intrinsic viscosity [eta] of the S-TM8 fractions were measured, respectively, by size-exclusion chromatography combined with laser light scattering (SEC-LLS), LLS and viscometry in phosphate buffer solution (PBS) at 37 degrees C. The dependences of [eta] and radius of gyration z(1/2) on Mw for the S-TM8 samples were found to be [eta]=1.89x10(-2) Mw(0.70) (cm3/g) and z(1/2)=1.12x10(-4) Mw(0.81) (nm) in the Mw range tested. Based on current theories for a wormlike chain model, the molar mass per unit contour length ML and persistence length q of the S-TM8 were calculated to be 990 nm(-1) and 8.5 nm, respectively. The relatively higher q value suggested a more expanded flexible chain of S-TM8 in PBS. The water-solubility and relatively expanded chain conformation of the STM8 fractions were considered to be significant to their antiviral activity.     

Formation of peptide nanospheres and nanofibrils by metal coordination

Two amphipathic polypeptides were coordinated to the cis positions of a square planar Pt(II) complex in order to provide the metal center with two noncovalent oligomerization domains. This resulted in the formation of new metal-peptide nanoassemblies which are shown to exist as nanometer-sized spheres and fibrils. Construction of these assemblies was based on the 30-residue polypeptide AQ-Pal14 which was designed for its ability to self-assemble into the common protein oligomerization motif of a noncovalent coiled-coil, and modified to contain a metal-binding 4-pyridylalanine residue at its surface. When AQ-Pal14 was reacted with Pt(en)(NO 3) 2, a new metal-peptide complex was formed in which two AQ-Pal14 peptides were coordinated to a single metal center as determined by sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) and electrospray ionization mass spectrometry (ESI-MS). When the reaction mixture was analyzed under nondenaturing conditions by high performance size exclusion chromatography (HPSEC), it was found that all species present eluted at the column void volume, indicating the formation of very large metal-peptide assemblies. This was verified by multiangle light scattering (MALS) which showed that the metal-peptide assemblies have a weight-averaged molecular mass and z-average root-mean-square radius of Mw = (7 +/- 4) x 10 (6) g/mol and Rz = 18 +/- 4 nm, respectively. The presence of such nanometer scale assemblies was confirmed by transmission electron microscopy and atomic force microscopy which showed the existence of both spherical and fibrillar nanostructures.     

Comparison of the binding of chicken alpha-macroglobulin and ovomacroglobulin to the mammalian alpha 2-macroglobulin receptor

Chicken alpha-macroglobulin (alpha M) and ovomacroglobulin were purified by Ni+2 chelate chromatography. These proteins had similar subunit structure as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Chicken alpha M bound 1.0 mol and ovomacroglobulin bound 0.8 mol 125I-trypsin per mol inhibitor, respectively. Ovomacroglobulin cleared rapidly from the circulation of mice, and the clearance was inhibited by asialoorosomucoid, but native chicken alpha M cleared slowly (t 1/2 greater than 1 h). After reaction with trypsin, this alpha-macroglobulin cleared rapidly (t 1/2 = 3 min), and this clearance was inhibited by a 1000-fold molar excess of human alpha 2M-methylamine. Ovomacroglobulin-trypsin did not inhibit the binding of 0.2 nM 125I-labeled human alpha 2M-methylamine to mouse peritoneal macrophages in vitro, but chicken alpha M reacted with trypsin inhibited the binding by 50% at 1.9 nM. A kappa I of 1.1 nM was calculated for the binding of chicken alpha M-trypsin to the mammalian alpha-macroglobulin receptor. This affinity is comparable to that obtained with human and bovine alpha 2M.     

Amyloid-beta peptide, substance P, and bombesin bind to the serpin-enzyme complex receptor.

During the formation of an inhibitory complex with neutrophil elastase, alpha 1 antitrypsin (alpha 1 AT) undergoes a structural rearrangement and the resulting alpha 1 AT-elastase complex becomes endowed with chemoattractant activities, mediates an increase in synthesis of alpha 1 AT, and is rapidly cleared from the circulation. In previous studies we have provided evidence that these biological activities involve the recognition of a conformation-specific domain in the alpha 1 AT molecule by a cell surface receptor on human hepatoma HepG2 cells and human monocytes. The receptor has been termed the serpin-enzyme complex (SEC) receptor because it also recognizes complex of serpins antithrombin III, alpha 1 anti-chymotrypsin, and C1 inhibitor with their cognate enzymes. Because a pentapeptide domain of alpha 1 AT (amino acids 370-374, Phe-Val-Phe-Leu-Met) is sufficient for binding to the SEC receptor and the sequence of this domain is remarkably similar to those of substance P, several other tachykinins, bombesin, and the amyloid-beta peptide, we have examined the possibility that these other ligands bind to the SEC receptor. The results indicate that substance P, several other tachykinins, and bombesin compete for binding to, and cross-linking of, the SEC receptor. The SEC receptor is distinct from the substance P receptor by several criteria. There is no substance P receptor mRNA in HepG2 cells; the SEC receptor is present in much higher density on receptor-bearing cells and binds its ligands at lower affinity than the substance P receptor; the SEC receptor is much less restricted in the specificity with which it recognizes ligand; ligands for the SEC receptor including peptide 105Y (based on alpha 1 AT sequence 359-374), alpha 1 AT-protease complexes, and bombesin do not compete for binding of substance P to a stable transfected cell line expressing the substance P receptor. Finally, we show here that the amyloid-beta peptide competes for binding to the SEC receptor but does not bind to the substance P receptor, therein raising the possibility that the SEC receptor is involved in certain biological activities, including the recently described neurotrophic and neurotoxic effects ascribed to the amyloid-beta peptide.     

Isolation and physical characterization of an exocellular polysaccharide

The physical properties of a polysaccharide produced by the lactic acid bacterium Lactococcus lactis subsp. cremoris strain NIZO B40 were investigated. Separation of the polysaccharide from most low molar mass compounds in the culture broth was performed by filtration processes. Residual proteins and peptides were removed by washing with a mixture of formic acid, ethanol, and water. Gel permeation chromatography (GPC) was used to size fractionate the polysaccharide. Fractions were analyzed by multiangle static light scattering in aqueous 0.10 M NaNO3 solutions from which a number- (Mn) and weight-averaged (Mw) molar mass of (1.47 +/- 0.06).10(3) and (1.62 +/- 0.07).10(3) kg/mol, respectively, were calculated so that Mw/Mn approximately 1.13. The number-averaged radius of gyration was found to be 86 +/- 2 nm. From dynamic light scattering an apparent z-averaged diffusion coefficient was obtained. Upon correcting for the contributions from intramolecular modes by extrapolating to zero wave vector a hydrodynamic radius of 86 +/- 4 nm was calculated. Theoretical models for random coil polymers show that this z-averaged hydrodynamic radius is consistent with the z-averaged radius of gyration, 97 +/- 3 nm, as found with GPC.     

Multi-angle light scattering as a process analytical technology measuring real-time molecular weight for downstream process control

For many protein therapeutics including monoclonal antibodies, aggregate removal process can be complex and challenging. We evaluated two different process analytical technology (PAT) applications that couple a purification unit performing preparative hydrophobic interaction chromatography (HIC) to a multi-angle light scattering (MALS) system. Using first principle measurements, the MALS detector calculates weight-average molar mass, M_w and can control aggregate levels in purification. The first application uses an in-line MALS to send start/stop fractionation trigger signals directly to the purification unit when preset M_w criteria are met or unmet. This occurs in real-time and eliminates the need for analysis after purification. The second application uses on-line ultra-high performance size-exclusion liquid chromatography to sample from the purification stream, separating the mAb species and confirming their M_w using a µMALS detector. The percent dimer (1.5%) determined by the on-line method is in agreement with the data from the in-line application (M_w increase of approximately 2750 Da). The novel HIC-MALS systems demonstrated here can be used as a powerful tool for real-time aggregate monitoring and control during biologics purification enabling future real time release of biotherapeutics.     

Structure and chain conformation of beta-glucan isolated from Auricularia auricula-judae

From Auricularia auricula-judae, a water soluble beta-D-glucan, named as AAG, was isolated by extraction with 70% ethanol/water solution. Its chemical structure was analyzed by gas chromatography (GC), gas chromatography-mass spectrometry (GC-MS), matrix-assisted laser desorption /ionization (MALDI)-time of flight (TOF), and 1D, 2D NMR. AAG was detected, for the first time, to be composed of a main chain of (1-->4)-linked D-glucopyranosyl with glucopyranosyl side groups at O6. With the help of MALDI-TOF-MS, the sequence and the distribution of glucuronic acid were determined and the content of glucuronic acid is about 19%. Five fractions were prepared from the AAG sample in water by ultrasonic degradation method. Their molecular weight, size, and shape (chain conformation) were studied by dynamics light scattering (DLS), static laser light scattering (LLS), size exclusion chromatography combined LLS (SEC-LLS) and viscometry in 0.1M NaCl aqueous solution at 25 degrees C. The dependence of intrinsic viscosity ([eta]) on Mw for this polysaccharide was established to be [eta] = 1.22 x10(-3)Mw (1.00) (cm3 g(-1)) in the range of Mw from 3.40 x 10(4) to 2.88 x 10(5). The conformational parameters of the AAG polysaccharide were found to be 820 nm(-1) for molar mass per unit contour length (ML), 12.3 nm for persistence length (q) and 2.1 for rho (s2(1/2)/Rh). The results suggested that the polysaccharide exists as extended chains in 0.1M NaCl aqueous solution. The chemical structure of AAG containing glucuronic acid and side groups led to steric hindrance, resulting in the increased stiffness of the chains.     

Structure of a highly substituted beta-xylan of the gum exudate of the palm Livistona chinensis (Chinese fan)

Structural features of the acidic, highly substituted glycanoxylan (LCP; 87% yield) from the gum exudate of the palm, Livistona chinensis, family Arecaceae, were determined. It had [alpha]D -30 degrees, Mw 1.9x10(5) and a polydispersity ratio Mw/Mn of approximately 1.0. Acid hydrolysis gave rise to Rha, Fuc, Ara, Xyl, and Gal, in a 1:6:46:44:3 molar ratio, and 12% of uronic acid was present. LCP had a highly branched structure with side-chains containing nonreducing end-units (% values are approximate) of Araf (15%), Fucp (4%), Xylp (7%), GlcpA, and 4-Me-GlcpA, and internal 2-O- (5%) and 3-O-substituted Araf (8%), and 2-O-substituted Xylp (14%) units. The (1-->4)-linked beta-Xylp main-chain units of LCP were substituted at O-3 (4%), O-2 (17%), and O-2,3 (16%). Partial acid hydrolysis gave 4-Me-alpha-GlcpA-(1-->2)-[beta-Xylp-(1-->4)](0-2)-Xyl, identified by showing that the uronic acids were single-unit side-chain substituents on O-2. Milder hydrolysis conditions removed from O-3 other side-chains containing Fucp and Araf nonreducing end-units and internal Arap, and 2-O- and 3-O-substituted Araf units. Carboxyl-reduced LCP contained 4-O-methylglucose and glucose in a 3.2:1 molar ratio, arising from GlcpA and 4-OMe-GlcpA nonreducing end-units, respectively. The gum contained small amounts of free alpha-Fucp-(1-->2)-Ara, which corresponds to structures in the polysaccharide. Free myo- and D- or L-chiro-inositol were present in a 9:1 ratio.