Site-specific deletion at the replication origin of the antibiotic resistance factor R1

Summary The recombinant plasmid pRK101 carrying the complete replication origin of the antibiotic resistance factor R1 suffers frequently a deletion of 218 base pairs, removing parts or all of the origin sequence. This deletion seems to occur always when the Pst-E fragment carrying the replication origin is inserted into the cloning vector pBR322 in an orientation where the direction of R1 replication is the same as that of the vector plasmid and frequently when it is inserted in the opposite direction. DNA sequence analysis around the junction site generated by the deletion in three independently isolated deletion mutants reveals that the deletion occurs at a specific site, namely the end of a 22 bp sequence which is repeated almost identically at the other end of a segment of 197 bp. During the deletion one repeat unit is removed whereas the other is retained. The DNA sequence included by the two repeats contains high symmetric structures, i.e. inverted repeats, direct repeats and palindromes which may represent regulatory sites of the origin.     

A Petunia hybrida chloroplast DNA region, close to one of the inverted repeats, shows sequence homology with the Euglena gracilis chloroplast DNA region that carries the putative replication origin

Summary Three distinct chloroplast (cp) DNA fragments from Petunia hybrida, which promote autonomous replication in yeast, were mapped on the chloroplast genome. Sequence analysis revealed that these fragments (called ARS A, B and C) have a high AT content, numerous short direct and inverted repeats and at least one yeast ARS consensus sequence 5A/TTTTATPuTTTA/T, essential for yeast ARS activity. ARS A and B also showed the presence of (semi-)conserved sequences, present in all Chlamydomanas reinhardii cpDNA regions that promote autonomous replication in yeast (ARS sequences) or in C. reinhardii (ARC sequences). A 431 bp BamHI/EcoRI fragment, close to one of the inverted repeats and adjacent to the ARS B subfragment contains an AT-rich stretch of about 100 nucleotides that show extensive homology with an Euglena gracilis cpDNA fragment which is part of the replication origin region. This conserved region contains direct and inverted repeats, stem-and-loop structures can be folded and it contains an ARS consensus sequence. In the near vicinity a GC-rich block is present. All these features make this cpDNA region the best candidate for being the origin of replication of P. hybrida cpDNA.     

The 20 bp, directly repeated DNA sequence of broad host range plasmid R1162 exerts incompatibility in vivo and inhibits R1162 DNA replication in vitro

Summary The broad host range plasmid R1162 contains a directly repeated, 20 bp DNA sequence in the region of the plasmid required in cis for replication and maintenance. This sequence has been chemically synthesized and cloned, and shown to be sufficient for expression of plasmid incompatibility. The sequence also inhibits replication of R1162 DNA in a cell-free system. The strengths of both these effects are determined by the number of direct repeats (DRs) present, and are also affected to similar degrees by different mutations within the repeated sequence. Several of the mutations were tested for their effect in cis on plasmid maintenance in the cell, and one was found to cause an increase in plasmid copy number. The results suggest that the direct repeats exert incompatibility by inhibiting DNA replication, presumably because they are the binding sites for a limiting essential protein.Abbreviations bp base pairs - Cb^r, Km^r, Sm^r resistance to carbenicillin, kanamycin, streptomycin, respectively - DR direct repeat     

Localization and sequence analysis of chloroplast DNA sequences of Chlamydomonas reinhardii that promote autonomous replication in yeast

Four distinct chloroplast DNA segments from Chlamydomonas reinhardii of 400, 415, 730 and 2300 bp which promote autonomous replication in yeast have been mapped on the chloroplast genome. Plasmids carrying these chloroplast DNA fragments are unstable in yeast when the cells are grown under non-selective conditions. Sequence analysis of three of these chloroplast ARS regions (autonomously replicating sequences in yeast) reveals a high AT content, numerous short direct and inverted repeats and the presence of at least one element in each region that is related to the yeast ARS consensus sequence. A/T TTTATPuTTT A/T. These three chloroplast regions share, in addition, two common elements of 10 and 11 bp which may play a role in promoting autonomous replication.     

The region essential for efficient autonomous replication of pSa in Escherichia coli

Summary Comparative analyses were made between plasmid pSa17, a deletion derivative of pSa that is capable of replicating efficiently in Escherichia coli and plasmid pSa3, a derivative that is defective for replication. By comparing the restriction maps of these two derivatives, the regions essential for replication and for stable maintenance of the plasmid were determined. A 2.5 kb DNA segment bearing the origin of DNA replication of pSa17 was sequenced. A 36 kDa RepA protein was encoded in the region essential for replication. Downstream of the RepA coding region was a characteristic sequence including six 17 bp direct repeats, the possible binding sites of RepA protein, followed by AT-rich and GC-rich sequences. Furthermore, an 8 bp incomplete copy of the 17 bp repeat was found in the promoter region of the repA gene. Based on the hypothesis that RepA protein binds to this partial sequence as well as to intact 17 bp sequences, an autoregulatory system for the synthesis of RepA protein may be operative. Another open reading frame (ORF) was found in the region required for the stability of the plasmid. The putative protein encoded in this ORF showed significant homology to several site-specific recombination proteins. A possible role of this putative protein in stable maintenance of the plasmid is discussed.     

Nucleotide sequence of the region of the origin of replication of the broad host range plasmid RK2

Summary A DNA sequence cosisting of 617 base pairs (bp) from the region of the origin of replication of the broad-host range plasmid RK2 has been determined. Included within this sequence is a 393 bp HpaII restriction fragment that provides a functional origin or replication when other essential RK2 specified functions are provided in trans. Also contained in this sequence is a region, distinguished functionally from the replication origin, which is involved in the expression of inc ₂ incompatibility, i.e., the ability of derivatives of RK2 to eliminate a resident RK2 plasmid. The 617 bp sequence includes eight 17 base pair direct repeats with 5 located within the region required for a functional replication origin and 3 within the region involved in inc ₂ incompatibility. In addition, a 40 bp region rich in A-T followed by a 60 bp stretch having a high G+C content is present. Deletion evidence indicates that the A-T rich and possibly the G+C regions are required for a functional replication origin. Based on the evidence contained in this and the preceding paper (Thomas et al. 1980 b) a model will be presented for the involvement of these specific sequences in the initiation of RK2 DNA replication, plasmid maintenance and plasmid incompatibility.     

Replication of mini-F plasmid in vitro promoted by purified E protein

Summary An in vitro system for replication of mini-F plasmid DNA was constructed. This system consists of an ammonium sulfate fraction II (Fuller et al. 1981) from Escherichia coli extract, exogeneously added purified E protein encoded by mini-F plasmid, and mini-F DNA in a closed circular form. Experiments with this system showed that the 217 bp DNA region which contains the A+T rich cluster and the four 19 bp direct repeats responsible for incB incompatibility is essential for mini-F DNA replication.     

Plasmid deletion formation between short direct repeats in Bacillus subtilis is stimulated by single-stranded rolling-circle replication intermediates

Summary The effects of the rolling-circle mode of replication and the generation of single-stranded DNA (ss DNA) on plasmid deletion formation between short direct repeats in Bacillus subtilis were studied. Deletion units consisting of direct repeats (9, 18, or 27 bp) that do or do not flank inverted repeats (300 bp) were introduced into various plasmid replicons that generate different amounts of ss DNA (from 0% to 40% of the total plasmid DNA). With ss DNA-generating rolling-circle-type plasmids, deletion frequencies between the direct repeats were 3- to 13-fold higher than in plasmids not generating ss DNA. When the direct repeats flanked inverted repeats the deletion frequencies in ss DNA-generating plasmids were increased by as much as 20- to 140-fold. These results support models for deletion formation based on template-switching errors during complementary strand synthesis of rolling-circle-type plasmids. The structural instability (deletion formation between short direct repeats) of the ss DNA-generating plasmid pTA1060 in B. subtilis was very low in the presence of a functional initiation site for complementary strand synthesis (minus origin). This observation suggests that it will be possible to develop stable host-vector cloning systems for B. subtilis.     

Mechanisms of deletion formation in Escherichia coli plasmids. II. Deletions mediated by short direct repeats.

Summary A set of plasmids containing 42, 21 and 13 bp direct repeats was used to analyze the effect of repeat length on the frequencies of deletion formation and the structure of the deleted derivatives of different recombination-deficient Escherichia coli strains. Agarose gel electrophoresis of plasmid DNA demonstrated that the formation of deletions in these plasmids was associated with dimerization of plasmid DNA. Restriction analysis of the dimers showed that deletions at short direct repeats arose non-conservatively, that is, the formation of a deletion in one monomeric plasmid unit was not associated with a duplication in the other. Mutations in the recA, recF, recJ and recO genes had no marked effect on either the frequencies of deletion formation or the structure of dimers. In contrast, recB recC mutations greatly increased the frequencies of deletion formation, 6-fold for 42 bp, and 115-fold for 21 by direct repeats. Conversion of DNA replication to the rolling circle mode in a recB recC strain, resulting in the formation of double-stranded ends, is suggested as the stimulatory effector.     

Sequence analysis of WIS-2-1A,a retrotransposon-like element from wheat

WIS-2-1A, a 8624 bp insertion in the Glu-1A-2 locus of chromosome 1A of wheat, consists of two 1755 bp long terminal repeats enclosing a 5114 bp internal region. No long open reading frames could be found, but inspection of the predicted amino acid sequence showed regions with homology to retrotransposon structures, including a methionine tRNA initiator binding site, a nucleotide binding domain, a protease, an integrase and a polymerase. DNA replication errors have resulted in frame-shifts in the protein coding region, suggesting that retrotransposition of WIS-2-1A, if it occurs, must be mediated by trans-acting factors.     

Nucleotide sequence and functional properties of DNA encoding incompatibility in the broad host-range plasmid R1162

Summary A 370 base pair (bp) fragment of R1162 DNA encoding the incompatibility determinant has been cloned and sequenced. The DNA is located between 6.1 and 6.5 on the R1162 map, near the origin of replication. The sequence contains three perfectly conserved 20 bp direct repeats, with 11 bp of this sequence repeated a fourth time. The direct repeat unit shows some homology with that of another, unrelated broad host-range plasmid, RK2. The cloned DNA has two other properties: it lowers the copy number of R1162 when cloned into this plasmid, and it is required in cis for replication of R1162 satellite plasmids.     

Structure and chromosomal localization of DNA sequences related to ribosomal subrepeats in Vicia faba

Subrepeating sequences of 325 bp found in the ribosomal intergenic spacer (IGS) of Vicia faba and responsible for variations in the length of the polycistronic units for rRNA were isolated and used as probes for in situ hybridization. Hybridization occurs at many regions of the metaphase chromosomes besides those bearing rRNA genes, namely chromosome ends and all the heterochromatic regions revealed by enhanced fluorescence after quinacrine staining. The DNA homologous to the 325 bp repeats that does not reside in the IGS was isolated, cloned and sequenced. It is composed of tandemly arranged 336 bp elements, each comprising two highly related 168 bp sequences. This structure is very similar to that of the IGS repeats and ca. 75% nucleotide sequence identity can be observed between these and the 168 bp doublets. The most obvious difference lies in the deletion, in the former, of a 14 bp segment from one of the two related sequences. It is hypothesized that the IGS repeats are derived from the 336 bp elements and have been transposed to ribosomal cistrons from other genome fractions. The possible relations between these sequences and others with similar structural features found in other species are discussed.by D. Schweizer     

High-resolution mapping of repetitive DNA by in situ hybridization: molecular and chromosomal features of prominent dispersed and discretely localized DNA families from the wild beet species Beta procumbens

Members of three prominent DNA families of Beta procumbens have been isolated as Sau3A repeats. Two families consisting of repeats of about 158 bp and 312 bp are organized as satellite DNAs (Sau3A satellites I and II), whereas the third family with a repeat length of 202 bp is interspersed throughout the genome. Multi-colour fluorescence in situ hybridization was used for physical mapping of the DNA families, and has shown that these tandemly organized families occur in large heterochromatic and DAPI positive blocks. The Sau3A satellite I hybridized exclusively around or near the centromeres of 10, 11 or 12 chromosomes. The Sau3A satellite family I showed high intraspecific variability and high-resolution physical mapping was performed on pachytene chromosomes using differentially labelled repeats. The physical order of satellite subfamily arrays along a chromosome was visualized and provided evidence that large arrays of plant satellite repeats are not contiguous and consist of distinct subfamily domains. Re-hybridization of a heterologous rRNA probe to mitotic metaphase chromosomes revealed that the 18S-5.8S-25S rRNA genes are located at subterminal position on one chromosome pair missing repeat clusters of the Sau3A satellite family I. It is known that arrays of Sau3A satellite I repeats are tightly linked to a nematode (Heterodera schachtii) resistance gene and our results show that the gene might be located close to the centromere. Large arrays of the Sau3A satellite II were found in centromeric regions of 16 chromosomes and, in addition, a considerable interspersion of repeats over all chromosomes was observed. The family of interspersed 202 bp repeats is uniformly distributed over all chromosomes and largely excluded from the rRNA gene cluster but shows local amplification in some regions. Southern hybridization has shown that all three families are specific for genomes of the section Procumbentes of the genus Beta.     

Origin and evolution of homologous repeated sequences in the mitochondrial DNA control region of shrews

The complete mitochondrial DNA (mtDNA) control region was amplified and directly sequenced in two species of shrew, Crocidura russula and Sorex araneus (Insectivora, Mammalia). The general organization is similar to that found in other mammals: a central conserved region surrounded by two more variable domains. However, we have found in shrews the simultaneous presence of arrays of tandem repeats in potential locations where repeats tend to occur separately in other mammalian species. These locations correspond to regions which are associated with a possible interruption of the replication processes, either at the end of the three-stranded D-loop structure or toward the end of the heavy-strand replication. In the left domain the repeated sequences (R1 repeats) are 78 bp long, whereas in the right domain the repeats are 12 bp long in C. russula and 14 bp long in S. araneus (R2 repeats). Variation in the copy number of these repeated sequences results in mtDNA control region length differences. Southern blot analysis indicates that level of heteroplasmy (more than one mtDNA form within an individual) differs between species. A comparative study of the R2 repeats in 12 additional species representing three shrew subfamilies provides useful indications for the understanding of the origin and the evolution of these homologous tandemly repeated sequences. An asymmetry in the distribution of variants within the arrays, as well as the constant occurrence of shorter repeated sequences flanking only one side of the R2 arrays, could be related to asymmetry in the replication of each strand of the mtDNA molecule. The pattern of sequence and length variation within and between species, together with the capability of the arrays to form stable secondary structures, suggests that the dominant mechanism involved in the evolution of these arrays in unidirectional replication slippage.      

Deletions in Plasmid Pbr322: Replication Slippage Involving Leading and Lagging Strands

We test here whether a class of deletions likely to result from errors during DNA replication arise preferentially during synthesis of either the leading or the lagging DNA strand. Deletions were obtained by reversion of particular insertion mutant alleles of the pBR322 amp gene. The alleles contain insertions of palindromic DNAs bracketed by 9-bp direct repeats of amp sequence; in addition, bp 2 to 5 in one arm of the palindrome form a direct repeat with 4 bp of adjoining amp sequence. Prior work had shown that reversion to Ampr results from deletions with endpoints in the 8- or 4-bp repeat, and that the 4-bp repeats are used preferentially because one of them is in the palindrome. To test the role of leading and lagging strand synthesis in deletion formation, we reversed the direction of replication of the amp gene by inverting the pBR322 replication origin, and also constructed new mutant alleles with a 4-bp repeat starting counterclockwise rather than clockwise of the insertion. In both cases the 4-bp repeats were used preferentially as deletion endpoints. A model is presented in which deletions arise during elongation of the strand that copies the palindrome before the adjoining 4-bp repeat, and in which preferential use of the 4-bp repeats independent of the overall direction of replication implies that deletions arise during syntheses of both leading and lagging strands.     

Sequence, organization, and evolution of the A+T region of Drosophila melanogaster mitochondrial DNA

The long (4.6-kb) A+T region of Drosophila melanogaster mitochondrial DNA has been cloned and sequenced. The A+T region is organized in two large arrays of tandemly repeated DNA sequence elements, with nonrepetitive intervening and flanking sequences comprising only 22% of its length. The first repeat array consists of five repeats of 338-373 bp. The second consists of four intact 464-bp repeats and a fifth partial repeat of 137 bp. Three DNA sequence elements are found to be highly conserved in D. melanogaster and in several Drosophila species with short A+T regions. These include a 300-bp DNA sequence element that overlaps the DNA replication origin and two thymidylate stretches identified on opposite DNA strands. We conclude that the length heterogeneity observed in the A+T regulatory region in mitochondrial DNAs from the genus Drosophila results from the expansion (and contraction) of the number of repeated DNA sequence elements. We also propose that the 300-bp conserved DNA sequence element, in conjunction with another primary sequence determinant, perhaps the adjacent thymidylate stretch, functions in the regulation of mitochondrial DNA replication.      

Interaction of the plasmid R6K-encoded replication initiator protein with its binding sites on DNA

Initiation of DNA replication in plasmid R6K is potentiated by the plasmid-encoded 35 kd replication initiator protein. We had previously reported that the initiator bound to two regions of R6K DNA called Site I and Site II. Using DNAase I footprinting technique we have demonstrated that the initiator bound to seven tandem repeats of a 22 bp long sequence in Site I. In Site II, the initiator bound to a single repeat having the same consensus sequence and to two partial repeats that most likely overlap the promoter of the initiation protein cistron. Using dimethyl sulfate as a chemical probe, we have determined the purine residues of Site I and Site II that make contact with the initiator protein. The results show that eight out of nine contact points per repeat in Site I were located on one of the two strands of the DNA. The binding of the initiator to the Site II sequence could explain the observed autoregulation of the synthesis of the initiator protein by promoter occlusion.     

Identification of a Replication Protein and Repeats Essential for DNA Replication of the Temperate Lactococcal Bacteriophage TP901-1

DNA replication of the temperate lactococcal bacteriophage TP901-1 was shown to involve the gene product encoded by orf13 and the repeats located within the gene. Sequence analysis of 1,500 bp of the early transcribed region of the phage genome revealed a single-stranded DNA binding protein analogue (ORF12) and the putative replication protein (ORF13). The putative origin of replication was identified as series of repeats within orf13 and was shown to confer a TP901-1 resistance phenotype when present in trans. Site-specific mutations were introduced into the replication protein and into the repeats. The mutations were introduced into the TP901-1 prophage by homologous recombination by using a vector with a temperature-sensitive replicon. Subsequent analysis of induced phages showed that the protein encoded by orf13 and the repeats within orf13 were essential for phage TP901-1 amplification. In addition, analyses of internal phage DNA replication showed that the ORF13 protein and the repeats are essential for phage TP901-1 DNA replication in vivo. These results show that orf13 encodes a replication protein and that the repeats within the gene are the origin of replication.