Environmental parameters affecting xylitol production from sugar cane bagasse hemicellulosic hydrolyzate by Candida guilliermondii

The bioconversion of xylose to xylitol by Candida guilliermondii FTI 20037 cultivated in sugar cane bagasse hemicellulosic hydrolyzate was influenced by cell inoculum level, age of inoculum and hydrolyzate concentration. The maximum xylitol productivity (0.75 g L⁻¹ h⁻¹) occurred in tests carried out with hydrolyzate containing 54.5 g L⁻¹ of xylose, using 3.0 g L⁻¹ of a 24-h-old inoculum. Xylitol productivity and cell concentration decreased with hydrolyzate containing 74.2 g L⁻¹ of xylose. Received 02 February 1996/ Accepted in revised form 15 November 1996     

Optimization of fed-batch fermentation for xylitol production by Candida tropicalis

Xylitol, a functional sweetener, was produced from xylose by biological conversion using Candida tropicalis ATCC 13803. Based on a two-substrate fermentation using glucose for cell growth and xylose for xylitol production, fed-batch fermentations were undertaken to increase the final xylitol concentration. The effects of xylose and xylitol on xylitol production rate were studied to determine the optimum concentrations for fed-batch fermentation. Xylose concentration in the medium (100 g l⁻¹) and less than 200 g l⁻¹ total xylose plus xylitol concentration were determined as optimum for maximum xylitol production rate and xylitol yield. Increasing the concentrations of xylose and xylitol decreased the rate and yield of xylitol production and the specific cell growth rate, probably because of an increase in osmotic stress that would interfere with xylose transport, xylitol flux to secretion to cell metabolism. The feeding rate of xylose solution during the fed-batch mode of operation was determined by using the mass balance equations and kinetic parameters involved in the equations in order to increase final xylitol concentration without affecting xylitol and productivity. The optimized fed-batch fermentation resulted in 187 g l⁻¹ xylitol concentration, 0.75 g xylitol g xylose⁻¹ xylitol yield and 3.9 g xylitol l⁻¹ h⁻¹ volumetric productivity. Journal of Industrial Microbiology & Biotechnology (2002) 29, 16–19 doi:10.1038/sj.jim.7000257 Received 15 October 2001/ Accepted in revised form 30 March 2002     

Metabolic behavior of immobilized Candida guilliermondii cells during batch xylitol production from sugarcane bagasse acid hydrolyzate

Candida guilliermondii cells, immobilized in Ca-alginate beads, were used for batch xylitol production from concentrated sugarcane bagasse hydrolyzate. Maximum xylitol concentration (20.6 g/L), volumetric productivity (0.43 g/L. h), and yield (0.47 g/g) obtained after 48 h of fermentation were higher than similar immobilized-cell systems but lower than free-cell cultivation systems. Substrates, products, and biomass concentrations were used in material balances to study the ways in which the different carbon sources were utilized by the yeast cells under microaerobic conditions. The fraction of xylose consumed to produce xylitol reached a maximum value (0.70) after glucose and oxygen depletion while alternative metabolic routes were favored by sub-optimal conditions.     

Production of xylitol by Candida peltata

Candida peltata NRRL Y-6888 to ferment xylose to xylitol was evaluated under different fermentation conditions such as pH, temperature, aeration, substrate concentration and in the presence of glucose, arabinose, ethanol, methanol and organic acids. Maximum xylitol yield of 0.56 g g⁻¹ xylose was obtained when the yeast was cultivated at pH 6.0, 28°C and 200 rpm on 50 g L⁻¹ xylose. The yeast produced ethanol (0.41 g g⁻¹ in 40 h) from glucose (50 g L⁻¹) and arabitol (0.55 g g⁻¹ in 87 h) from arabinose (50 g L⁻¹). It preferentially utilized glucose > xylose > arabinose from mixed substrates. Glucose (10 g L⁻¹), ethanol (7.5 g L⁻¹) and acetate (5 g L⁻¹) inhibited xylitol production by 61, 84 and 68%, respectively. Arabinose (10 g L⁻¹) had no inhibitory effect on xylitol production. Received 24 December 1998/ Accepted in revised form 18 March 1999     

Analysis and optimization of a two-substrate fermentation for xylitol production using Candida tropicalis

Xylitol, a functional sweetener, was produced from xylose using Candida tropicalisATCC 13803. A two-substrate fermentation was designed in order to increase xylitol yield and volumetric productivity. Glucose was used initially for cell growth followed by conversion of xylose to xylitol without cell growth and by-product formation after complete depletion of glucose. High glucose concentrations increased volumetric productivity by reducing conversion time due to high cell mass, but also led to production of ethanol, which, in turn, inhibited cell growth and xylitol production. Computer simulation was undertaken to optimize an initial glucose concentration using kinetic equations describing rates of cell growth and xylose bioconversion as a function of ethanol concentration. Kinetic constants involved in the equations were estimated from the experimental results. Glucose at 32 g L⁻¹ was estimated to be an optimum initial glucose concentration with a final xylose concentration of 86 g L⁻¹ and a volumetric productivity of 5.15 g-xylitol L⁻¹ h⁻¹. The two-substrate fermentation was performed under optimum conditions to verify the computer simulation results. The experimental results were in good agreement with the predicted values of simulation with a xylitol yield of 0.81 g-xylitol g-xylose⁻¹ and a volumetric productivity of 5.06 g-xylitol L⁻¹ h⁻¹. Received 16 June 1998/ Accepted in revised form 28 February 1999     

Hydrolysate detoxification with activated charcoal for xylitol production by Candida guilliermondii

A detoxification method using activated charcoal with concentrated rice straw hemicellulosic hydrolysate improved the conversion of xylose to xylitol by the yeast Candida guilliermondii by 22%. This was achieved when the hydrolysate:charcoal ratio was 40 g g^–1, resulting in removal of 27% of phenolic compounds. Under this condition, the xylitol yield factor (0.72 g g^–1) and volumetric productivity (0.61 g l^–1 h^–1) were close to those attained in a semi-defined medium simulating hydrolysate sugars.     

Statistical screening method for selection of important variables on xylitol biosynthesis from rice straw hydrolysate by Candida guilliermondii FTI 20037

Fourteen assays were conducted to study the influence of different variables, namely xylose concentration, inoculum level, agitation speed and nutrient supplementation, on xylitol biosynthesis by Candida guilliermondii FTI 20037. The maximum predicted values for xylitol yield (0.65 g g^–1) and xylitol productivity (0.66 g l^–1 h^–1) can be attained with rice straw hydrolysate containing 60 g xylose l^–1 without supplementation of ammonium sulfate, calcium chloride and rice bran extract, using 5 g inoculum l^–1, at 250 rpm. Xylose concentration and inoculum level were selected for further optimization studies.     

Screening and characterization of yeasts for xylitol production

AIMS: To discover novel naturally occurring xylitol producing yeast species with potential for industrial applications. METHODS AND RESULTS: Exactly 274 strains were cultivated on both solid and liquid screening medium with xylose as the sole carbon resource. Five strains were selected on the basis of significant growth and high degree of xylose assimilation. Their phylogenetic position was confirmed by the PCR-RFLP and sequence analysis of the D1/D2 domain of the 5' end of the large subunit rDNA gene (5'-LSU rDNA). Enzymatic analysis was conducted to compare xylose metabolism in each strain. Candida guilliermondii Xu280 and Candida maltosa Xu316 were found to have high xylose consumption rates and xylitol yields in the batch fermentation under micro-aerobic condition. The effect of the different media with high initial xylose concentration on biosynthesis of xylitol by both strains was investigated. CONCLUSIONS: We have identified Candida spp. strains, which exhibit high levels of xylitol production from xylose suggesting that these may have potential for industrial applications. SIGNIFICANCE AND IMPACTS OF THE STUDY: Microbial species are of importance for xylitol production. Xylitol production involves complicated metabolic regulation including xylose transport, production of key enzymes and cofactor regeneration. Thus, screening of naturally occurring xylose-utilizing micro-organisms is a viable and effective mean to obtain xylitol producing organisms with industrial application. Moreover, the research on selected strains will contribute to a better understanding of regulatory properties of xylose metabolism in different yeasts.     

Effects of environmental conditions on production of xylitol byCandida boidinii

Candida boidinii NRRL Y-17213 produced more xylitol thanC. magnolia (NRRL Y-4226 and NRRL Y-7621),Debaryomyces hansenii (C-98 M-21, C-56 M-9 and NRRL Y-7425), orPichia (Hansenula) anomala (NRRL Y-366). WithC. boidinii, highest xylitol productivity was at pH 7 but highest yield was at pH 8, using 5 g urea and 5 g Casamino acids/I. Decreasing the aeration rate decreased xylose consumption and cell growth but increased the xylitol yield. When an initial cell density of 5.1 g/l was used instead of 1.3 g/l, xylitol yield and the specific xylitol production rate doubled. Substrate concentration had the greatest effect on xylitol production; increasing xylose concentration 7.5-fold (to 150 g/l) gave a 71-fold increase in xylitol production (53 g/l) and a 10-fold increase in xylitol/ethanol ratio. The highest xylitol yield (0.47 g/g), corresponding to 52% of the theoretical yield, was obtained with 150 g xylose/l after 14 days. Xylose at 200 g/l inhibited xylitol production.E. Vandeska and S. Kuzmanova were and S. Amartey and T. Jeffries are with the Forest Products Laboratory, Institute for Microbial and Biochemical Technology, 1 Gifford Pinchot Drive, Madison, WI 53703, USA. E. Vandeska and S. Kuzmanova are now with the Faculty of Technology and Metallurgy, Rudjer Boskovic 16, 91000 Skopje, Macedonia     

Xylitol production from aspenwood hemicellulose hydrolysate by Candida guilliermondii

The production of xylitol by the yeast Candida guilliermondii was investigated in batch fermentations with aspenwood hemicellulose hydrolysate and compared with results obtained in semi-defined media with a mixture of glucose and xylose. The hemicellulose hydrolysate had to be supplemented by yeast extract and the maximum xylitol yield (0.8 g g^–1) and productivity (0.6 g l^–1 h^–1) were reached by controlling oxygen input.     

Optimization of D-xylose to xylitol biotransformation by Candida guilliermondii cells permeabilized with Triton X-100

Abstract

The effect of NADP⁺ and glucose-6-phosphate (G6P) on the biotransformation of D-xylose to xylitol by cells of Candida guilliermondii permeabilized with surfactant Triton X-100 was evaluated. The experimental runs were performed with 12 g L^?1 of permeabilized cells and a reaction medium composed of Tris–HCl buffer (0.1 M pH 7), D-xylose (57 g L^?1), and MgCl₂.6H₂O (5 mM). The levels of NADP⁺ (from 0.0 to 1.7 mM) and G6P (from 0.00 to 0.17 M) were varied according a 2²-full factorial composed design. Under optimized conditions (NADP⁺ 0.5 mM and 0.05 M G6P), the xylitol volumetric productivity (Q_P) and yield factor (Y_P/S) predicted were 1.86 ± 0.03 g L^?1 h^{? 1} and 0.64 ± 0.03 g g^?1, respectively. These values were 94% and 19% higher than those obtained with unpermeabilized cells under fermentation conditions (0.97 g L^?1 h^?1 and 0.53 g g^?1, respectively). On the basis of the results, it can be concluded that xylitol production by biotransformation with cells of C. guilliermondii permeabilized with Triton X-100 is a promising alternative to the fermentative process.     

Xylitol production from high xylose concentration: evaluation of the fermentation in bioreactor under different stirring rates

AIMS: To investigate the production of xylitol by the yeast Candida guilliermondii FTI 20037, in a bioreactor, from rice straw hemicellulosic hydrolysate with a high xylose concentration. METHODS AND RESULTS: Batch fermentation was carried out with rice straw hemicellulosic hydrolysate containing about 85 g xylose l(-1), in a stirred-tank bioreactor at 30 degrees C, under aeration of 1.3 vvm (volume of air per volume of medium per min) and different stirring rates (200, 300 and 500 rev min(-1)). The bioconversion of xylose into xylitol by the yeast depended on the stirring rate, the maximum xylitol yield (YP/S = 0.84 g g(-1)) being achieved at 300 rev min-1, with no need to pretreat the hydrolysate for purification. CONCLUSIONS: To determine the most adequate oxygen transfer rate is fundamental to improving the xylose-to-xylitol bioconversion by C. guilliermondii. SIGNIFICANCE AND IMPACT OF THE STUDY: For the microbial production of xylitol to be economically viable, the initial concentration of xylose in the lignocellulosic hydrolysate should be as high as possible, as with high substrate concentrations it is possible to increase the final product concentration. Nevertheless, there are few reports on the use of high xylose concentrations. Considering a process in bioreactor, from rice straw hemicellulosic hydrolysate, this is an innovator work.     

Mixed inhibitions by methanol, furfural and acetic acid on xylitol production by Candida guilliermondii

Xylose production by Candida guilliermondii FTI 20037 was carried out in a synthetic medium in the presence of 0–100 g methanol l^–1, 0–0.7 g furfural l^–1 or 0–1.3 g acetic acid l^–1. Kinetic results show a mixed inhibition mechanism in all three cases. Maximum specific productivity and saturation constant for product formation were, in the absence of inhibition, 3.6 g_P g_X ^–1 h^–1 and 232 g_S l^–1, respectively, while the inhibition constants, K _i and K _i, were 17 and 50 g methanol l^–1, 0.62 and 7.0 g furfural l^–1, 0.69 and 3.5 g acetic acid l^–1, which suggests the following order of inhibition: furfural > acetic acid > methanol.     

Evaluation of xylitol production from corn cob hemicellulose hydrolysate by Candida parapsilosis

Candida parapsilosis was grown for 59 h in a medium containing corn cob hydrolysate consisting of 50 g xylose l^–1, 3.0 g glucose l^–1, 2.0 g arabinose l^–1, and 0.9 g acetic acid l^–1. A biomass of 9.1 g l^–1 was produced with 36 g xylitol l^–1 and 2.5 g ethanol l^–1. In a medium containing 50 g xylose l^–1 instead of corn cob hydrolysate, the concentrations of cells, xylitol, and ethanol were 8.6 g l^–1, 33 g l^–1, and 0.2 g l^–1, respectively. The differences between two cultures were due to the glucose and arabinose in the corn cob hydrolysate stimulating growth and the low concentration of acetic acid stimulating xylitol production.     

Production of xylitol from D-xylose by Candida tropicalis: optimization of production rate

The effect of culture conditions on xylitol production rate was investigated using Candida tropicalis IFO 0618. From the variance analysis of xylitol production rate, it was found that initial yeast extract concentration was highly significant (99%), while the interaction between D-xylose concentration and aeration rate was significant (95%). These results show the importance of initial yeast extract concentration and of the balance between D-xylose concentration and aeration in the production of xylitol. It was also clearly shown that C. tropicalis needed more yeast extract concentration for efficient xylitol production than for its growth. In order to enhance xylitol production rate, culture conditions were optimized by the Box-Wilson method. In this respect, initial D-xylose concentration, yeast extract concentration, and K(L)a were chosen as the independent factors in 2(3)-factorial experimental design. As the result of experiments, a maximum xylitol production rate of 2.67 g/L . h was obtained when initial D-xylose concentration and yeast extract concentration were 172.0 and 21.0 g/L, respectively, and K(L)a was 451.50 h(-1) by 90% oxygen gas. (c) 1992 John Wiley & Sons, Inc.     

Evaluation of cotton stalk hydrolysate for xylitol production

Cotton stalk is a widely distributed and abundant lignocellulosic waste found in Turkey. Because of its rich xylose content, it can be a promising source for the production of xylitol. Xylitol can be produced by chemical or biotechnological methods. Because the biotechnological method is a simple process with great substrate specificity and low energy requirements, it is more of an economic alternative for the xylitol production. This study aimed to use cotton stalk for the production of xylitol with Candida tropicalis Kuen 1022. For this purpose, the combined effects of different oxygen concentration, inoculum level and substrate concentration were investigated to obtain high xylitol yield and volumetric xylitol production rate. Candida tropicalis Kuen 1022 afforded different concentrations of xylitol depending on xylose concentration, inoculum level, and oxygen concentration. The optimum xylose, yeast concentration, and airflow rate for cotton stalk hydrolysate were found as 10.41 g L^?1, 0.99 g L^?1, and 1.02 vvm, respectively, and under these conditions, xylitol yield and volumetric xylitol production rate were obtained as 36% and 0.06 g L^?1 hr^?1, respectively. The results of this study show that cotton stalk can serve as a potential renewable source for the production of xylitol.     

Eucalyptus hydrolysate detoxification with activated charcoal adsorption or ion-exchange resins for xylitol production

Eucalyptus hemicellulosic hydrolysate used for xylitol production by Candida guilliermondii FTI20037 was previously treated either with ion-exchange resins or with activated charcoal adsorption combined with pH adjustment, in order that acetic acid, furfural and hydroxymethylfurfural could be removed. The best results for xylitol yield factor (0.76 g/g) and volumetric productivity (0.68 g/(l h) were attained when a three-fold concentrated hydrolysate was treated with ion-exchange resins. Using activated charcoal combined with pH adjustment for treating a three-fold concentrated hydrolysate resulted in a xylitol yield factor of 0.40 g/g and a volumetric productivity of 0.30 g/(l h). This same treatment applied to a six-fold concentrated hydrolysate resulted in a xylitol yield factor of 0.66 g/g and a volumetric productivity of 0.50 g/(l h).     

Effect of selected aldehydes found in the corncob hemicellulose hydrolysate on the growth and xylitol fermentation of Candida tropicalis

The effects of four aldehydes (furfural, 5‐hydroxymethylfurfural, vanillin and syringaldehyde), which were found in the corncob hemicellulose hydrolysate, on the growth and xylitol fermentation of Candida tropicalis were investigated. The results showed that vanillin was the most toxic aldehyde for the xylitol fermentation, followed by syringaldehyde, furfural and 5‐hydroxymethylfurfural. Moreover, the binary combination tests revealed that furfural amplified the toxicity of other aldehydes and the toxicities of other binary combinations without furfural were simply additive. Based on the fermentation experiments, it was demonstrated that the inhibition of aldehydes could be alleviated by prolonging the fermentation incubation, increasing the initial cell concentration, enhancing the initial pH value and minimizing the furfural levels in the hydrolysate evaporation process. The strategies that we proposed to suppress the inhibitory effects of the aldehydes successfully avoided the complicated and costly detoxifications. Our findings could be potentially adopted for the industrial xylitol fermentation from hydrolysates. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1181–1189, 2013     

Effect of inoculum level on xylitol production from rice straw hemicellulose hydrolysate byCandida guilliermondii

The effect of inoculum level on xylitol production byCandida guilliermondii was evaluated in a rice straw hemicellulose hydrolysate. High initial cell density did not show a positive effect in this bioconversion since increasing the initial cell density from 0.67 g L^–1 to 2.41 g L^–1 decreased both the rate of xylose utilization and xylitol accumulation. The maximum xylitol yield (0.71 g g^–1) and volumetric productivity (0.56 g L^–1 h^–1) were reached with an inoculum level of 0.9 g L^–1. These results show that under appropriate inoculum conditions rice straw hemicellulose hydrolysate can be converted into xylitol by the yeastC. guilliermondii with efficiency values as high as 77% of the theoretical maximum.