Poor survival of ABG I hip prosthesis in younger patients

Background: Hydroxyapatite coated (HAC) hip implants have been used in clinical practice for more than two decades. However, the majority of studies have reported only intermediate term outcomes that are not reliable for predicting long-term behavior in all implants. The aim of this study was to determine the performance of HAC total hip arthroplasty in younger patients over a 10-year follow-up period. Methods and Results: This was an observational retrospective study of a 137 consecutive hips with the ABG I prosthesis. Of these, 128 were available for the last investigation. Median duration of follow-up was 10.9 years. The mean age at time of index surgery was 46+/-6.7 years. Probability of implant survival was estimated using the Kaplan-Meier method. The overall 12-year cumulative survival was 0.55 (95% CI, 0.443-0.659). Periprosthetic osteolysis (57 %) was the most frequent reason for failure followed by aseptic loosening (28 %). When only aseptic loosening was included in the analysis, the same figures for cup and stem were 0.873 (95% CI, 0.808-0.938) and 0.992 (95% CI, 0.976- 1.0), respectively. Patients with a smaller cup size were those at high risk for revision due to wear-related complications (odds ratio, OR=4.3; 95% CI, 1.734-10.555). Conclusion: This study reports one of the poorest 12-year survivorship data for cementless acetabular component in the literature. The main reason for premature failure was osteolysis, strongly related to high wear rate of polyethylene.     

The robustness and accuracy of in vivo linear wear measurements for knee prostheses based on model-based RSA

Accurate in vivo measurements methods of wear in total knee arthroplasty are required for a timely detection of excessive wear and to assess new implant designs. Component separation measurements based on model-based Roentgen stereophotogrammetric analysis (RSA), in which 3-dimensional reconstruction methods are used, have shown promising results, yet the robustness of these measurements is unknown. In this study, the accuracy and robustness of this measurement for clinical usage was assessed. The validation experiments were conducted in an RSA setup with a phantom setup of a knee in a vertical orientation. 72 RSA images were created using different variables for knee orientations, two prosthesis types (fixed-bearing Duracon knee and fixed-bearing Triathlon knee) and accuracies of the reconstruction models. The measurement error was determined for absolute and relative measurements and the effect of knee positioning and true seperation distance was determined. The measurement method overestimated the separation distance with 0.1mm on average. The precision of the method was 0.10mm (2*SD) for the Duracon prosthesis and 0.20mm for the Triathlon prosthesis. A slight difference in error was found between the measurements with 0° and 10° anterior tilt. (difference=0.08mm, p=0.04). The accuracy of 0.1mm and precision of 0.2mm can be achieved for linear wear measurements based on model-based RSA, which is more than adequate for clinical applications. The measurement is robust in clinical settings. Although anterior tilt seems to influence the measurement, the size of this influence is low and clinically irrelevant.     

Periprosthetic osteolysis and its association with RANKL expression

Extensive osteolysis adjacent to orthopedic implants is often associated with wear particles of prosthetic material. The activation of the RANKL/RANK/OPG system is considered to be a likely cause of periprosthetic osteolysis leading to implant failure. The aim of this study was to examine the possible correlation between the clinical extent of osteolysis, the number of wear particles and expression of the osteoclastic mediator RANKL (receptor activator of nuclear factor kappa B ligand) in the tissues around aseptically loosened cemented and non-cemented total hip replacements. Periprosthetic tissues were harvested from 59 patients undergoing revision of hip replacement for aseptic loosening. We observed RANKL-positive cells in 23 of our 59 patients, their presence was noted predominantly in tissues with a loosened cemented endoprosthesis. We have found that RANKL is present only in tissues with a large amount of wear debris and predominantly in cases involving loosened cemented implants.     

Decelerating and sex-dependent tooth wear in Norwegian red deer

In ungulates, tooth wear is often suggested as a proximate cause of senescence. Tooth wear is expected to be sex-dependent since energetic requirements and food selection varies largely between sexes in sexually dimorphic ungulates. Furthermore, tooth wear may lower mastication efficiency, and we predict a negative correlation between tooth wear and body weight or condition. We tested these predictions on data on tooth wear (estimated as height of first molar) of 1,311 male and 1,348 female red deer ( Cervus elaphus) aged 3-25 years and harvested along the west coast of Norway. The rate of tooth wear decreased with age. Males wear teeth at a higher rate (from 0.61 mm/year in 4-year olds to 0.45 mm/year in 11-year olds) than females (from 0.52 mm/year in 4-year olds to 0.39 mm/year in 11-year olds). Molar height correlated positively with body weight in both sexes, but not after adjusting for body size. Molar height was strongly dependent on body size in 3-year-old individuals (when tooth wear is minimal). Earlier reports in the literature of a positive correlation between tooth height and body weight may therefore be due to initial size differences rather than differences in condition due to tooth wear.     

Wear paths produced by individual hip-replacement patients--a large-scale, long-term follow-up study

Wear particle accumulation is one of the main contributors to osteolysis and implant failure in hip replacements. Altered kinematics produce significant differences in wear rates of hip replacements in simulator studies due to varying degrees of multidirectional motion. Gait analysis data from 153 hip-replacement patients 10-years post-operation were used to model two- and three-dimensional wear paths for each patient. Wear paths were quantified in two dimensions using aspect ratios and in three dimensions using the surface areas of the wear paths, with wear-path surface area correlating poorly with aspect ratio. The average aspect ratio of the patients wear paths was 3.97 (standard deviation=1.38), ranging from 2.13 to 10.86. Sixty percent of patients displayed aspect ratios between 2.50 and 3.99. However, 13% of patients displayed wear paths with aspect ratios >5.5, which indicates reduced multidirectional motion. The majority of total hip replacement (THR) patients display gait kinematics which produce multidirectional wear paths, but a significant minority display more linear paths.     

An elasto-plastic finite element model for polyethylene wear in total hip arthroplasty

A new finite element model (FEM) based on an elasto-plastic behavior of ultra high molecular weight polyethylene (UHMWPE) was used to study the wear behavior of UHMWPE acetabular cup, which has a 32 mm diameter femoral head. The model imposed a plastic yield stress of 8 MPa on the UHMWPE so that any stresses beyond this would automatically be redistributed to its neighbor. The FEM model adopted a unique mesh design based on an open cube concept which eliminated the problems of singularities. Wear prediction combined the influences of contact stress, sliding distance and a surface wear coefficient. The new model predicted significantly higher volumetric wear rate (57 mm(3)/yr) well within the average reported clinical values. The model was also used to study the effect of friction and clearance between the acetabular cup and the femoral head. Increase in friction increased the volumetric wear rate but did not appear to affect the linear wear rate, which remained at 0.12 +/- 0.02 mm/yr. The predicted wear was sensitive to clearance. It was found that when the clearance was close to 0 and >0.5mm, severe wear occurred. The best clearance range was between 0.1 and 0.15 mm where the average linear wear rate was 0.1mm/yr and the volumetric wear was 55 mm(3)/yr. The present work indicates the importance of avoiding too tight or too loose a diametrical clearance.     

Distribution, growth and mortality of young rough scad, Trachurus lathami, in the south-eastern Brazilian Bight

Distribution, growth and mortality of larval and juvenile rough scad Trachurus lathami Nichols, 1920, were studied, based on samples collected during December 1991 in the south-eastern Brazilian Bight. Young rough scad were widespread throughout the region surveyed, but spawning was more intensive in the northern area and tended to be greater in areas of low temperature and high salinity. The length class distribution of the rough scad larvae and juveniles ranged from 2.25 to 32.25 mm body length (BL), and the preflexion larvae of size categories from 2.25 to 3.25 mm BL were the most abundant. Net avoidance was detected for early larvae (2.25 mm length class) and for juveniles larger than 12.25 mm BL length class. Two models were applied to estimate growth and daily growth rate: a linear regression and a Gompertz curve. Both curves showed similar results and a good fit to the data. The mean growth rate estimated by linear regression was 0.44 mm per day (SD=0.008 mm). In small larvae up to 25 mm BL the linear and Gompertz curves showed similar estimated lengths. The hypothetical length at age zero ( L ₀) was estimated as 1.5 mm. The instantaneous daily mortality coefficient estimated from the slope of the regression of log-transformed values of relative production rates ( P _t/ d _t) against age ( t_i ) was Z=0.1888 for larval and juvenile rough scad. This corresponds to a daily mortality rate of 17.2%.     

全关节成形术中假体周围骨溶解的概述：本体因素与未来发展方向

假体周围骨溶解是全关节翻修术的主要原因之一,如果在缺乏影像学诊断和(或)正确的治疗手段下而任其进展,骨溶解造成的无菌性松动会导致假体置换的失败,患者将需要进行关节翻修术。这篇综述的目的是立足于本体因素和未来发展方向的前提下来评估近几年对假体周围骨溶解的认识。假体周围骨溶解来源于多种危险因素。骨溶解特有的主体因素包括性别、体重和遗传学因素。新近的假体设计已经降低了这种情况的发生,但是没有一种设计可以代替体内原有的结构特征,因此,我们仍然可以看到关于磨损颗粒的的研究进展。在影像学诊断方面,先进的技术不断出现,但是在早期诊断方面依然缺乏有效的方法。药物干预看似是一种可行的医学干预方法,但是目前还没有明确的药物治疗被证明在阻止或抑制假体周围骨溶解方面是可行的。尽管随着假体设计的进步和对磨损颗粒诱导的假体周围骨溶解生物学过程知识的不断丰富,假体周围骨溶解率在下降,但是在未来二十年全关节置换术数量将快速上升,这意味着我们将需要诊断和治疗假体周围骨溶解的更好方法。     

Biology and population dynamics of Porcellionides sexfasciatus (Crustacea,Isopoda, Oniscidea)

The biology and the population dynamics of Porcellionides sexfasciatus Budde-Lund (1879) were studied on a field and carried out at Garat Naam (Kasserine, Tunisia) from July 1996 to June 1998. The reproduction exhibited a seasonal pattern extending from February/March to October/November. The juveniles appeared in the population from April to November. Size frequency distributions were analysed and 14 cohorts were recognised during the sampling period. Six cohorts were identified at the first sampling and eight new ones on the other samplings. Among these latter cohorts, three were tracked till they disappeared. Minimum average length of new cohorts ranged from 3.07 +/- 0.35 mm to 3.47 +/- 0.2 mm. Maximum average length of cohorts was 10.42 mm. P. sexfasciatus is a semi-annual species (females producing two or three broods per year), with iteroparous and amphogenes females (females reproducing twice or more in their life and producing both males and females), and bivoltine life cycle (two generations per year). The females are able to produce two broods, in the laboratory, without new mating. Fecundity and fertility, corresponding to the number of eggs or embryos per brood, appeared positively correlated with females' size. Although oscillating throughout the year, the sex ratio was often in equilibrium.     

The autofluorescent age pigment lipofuscin: key to age, growth and productivity of the Antarctic amphipod Waldeckia obesa (Chevreux, 1905)

Peracarid crustaceans are among the most important taxa in terms of biodiversity and carbon-flow within the Weddell Sea benthos; however, very few data on their age, growth and productivity are available. This study uses the pigment lipofuscin as an age marker in the scavenging amphipod Waldeckia obesa (Chevreux, 1905) from the eastern Weddell Sea. Resin brain sections of 159 trap-caught specimens (1.2 to 7.7 mm coxal plate length L(cox) equal to 5 to 31 mm total length) were recorded digitally by confocal microscopy, and images were analysed. A modal progression analysis of the lipofuscin concentration-frequency distribution revealed five regularly spaced modes presumed to reflect consecutive annual age classes. Single females outside the range of mode V occurred, indicating maximum age of up to 8 years in females. No regular modes were obvious from the comparable length-frequency distribution of 386 individuals. Average yearly pigment accumulation was linear, and accumulation rates did not differ between sexes. The estimates of the growth parameters L(infinity) and k of the von Bertalanffy growth function were 7.47 mm L(cox) and 0.50 per year in females, respectively, and 6.92 mm L(cox) and 0.60 per year in males, respectively. Mortality, estimated from catch curves, amounted to 0.27 per year in females and 0.43 per year in males. P/B ratio, calculated from the mass specific growth rate method, was 0.38 per year for the pooled population (0.25 per year in females, 0.31 per year in males, 2.26 per year in juveniles). The results are discussed with regard to advantages and drawbacks of the methodology, and are compared with results from warmer water habitats.     

Seed dispersal by woolly monkeys (Lagothrix lagothricha) at Tinigua National Park, Colombia: dispersal distance, germination rates, and dispersal quantity

The purpose of this study was to describe seed dispersal patterns of woolly monkeys (Lagothrix lagothricha) in terms of dispersal quantity and two factors related to dispersal quality: germination rates of dispersed seeds and the distance of dispersal to parental trees. The possible influence of retention time, travel distance, seed size, activity patterns, and fruit abundance on dispersal distance was also analyzed. Observations on activity, diet, daily movements, and seed dispersal were made on focal individuals of a group of woolly monkeys at a tropical rain forest in Tinigua National Park (Colombia). Sixty hours of focal samples per month were completed during 1 year. A total of 753 depositions were collected during the study. Each dropping contained seeds from an average of 2.68 different species (range 0 to 9). Collected depositions contained an underestimated total of 50,168 seeds (>1 mm). Given a population density of 30 individuals/km2, the woolly monkeys in the study area disperse more than 25,000 seeds/km2/day. These seeds belong to 112 different plant species. Germination rates of dispersed seeds are usually similar or higher than those of non-swallowed seeds. It was possible to determine dispersal distance in 264 cases when the focal animal was continuously followed from ingestion at the parental tree to deposition. Only 1% of these depositions landed in close proximity (<15 m) of the parental tree. It was very common that the droppings were deposited between 100 and 500 m from the parent tree, and up to 1.5 km. Higher retention times and longer travel distances were not correlated with increased dispersal distance. Two main reasons for this result were the prolonged and variable passage rates (avg=11.2 hr+/-6.5 SD.) and the circuitous routes of monkeys in this forest.     

Volumetric computerized tomography as a measurement of periprosthetic acetabular osteolysis and its correlation with wear

Osteolysis, which is considered to be a major source of morbidity following total hip joint replacement, has been notoriously difficult to measure accurately, particularly in the acetabular area. In order to study periacetabular osteolysis, specialized software for computerized tomography (CT) scan image analysis has been developed. This software (3D-CT) eliminates metal artifacts, allows three-dimensional segmentation of the CT image, and reconstructs the segmented image to provide an accurate representation and measurement of volume for osteolytic lesions. In the present study, 20 patients underwent periacetabular osteolytic volume determination using 3D-CT, functional assessment (using the Harris Hip Scale, the Western Ontario and McMaster University Osteoarthritis Index, and the short form 36 questionnaire), and two-dimensional analysis of volumetic polyethylene wear using digitalized plain films. Periacetabular osteolysis correlated directly with the polyethylene wear rate (relative risk [RR] = 0.494, P = 0.027). If one patient with an acetabular revision, one patient with recurrent dislocation, and one patient with a Biomet prosthesis are excluded, then the correlation between wear and osteolysis is improved (RR = 0.685, P = 0.002). In summary, the current study demonstrates both the feasibility of CT imaging of periacetabular osteolysis and the correlation between polyethylene wear and osteolytic volume, providing a potential outcome measure for clinical trials that are designed to examine interventions in this complex disease process.     

Fluctuating recruitment and variable life history of migratory brown trout, Salmo trutta L., in a small, unstable stream

The recruitment dynamics and life history of migratory brown trout, Sulmo trutta L., were investigated in a small Baltic coast stream subject to recurring drought. Spawning males consisted of both mature male parr (101–206 mm t.l. ) and migrant males (205–780 mm t.l. ). Spawning females were all migrants which delayed maturity until reaching a significantly greater size on average (424–805 mm t.l. ) than migrant males. Male: female ratios were very high in spawning aggregations (9–12 males: 1 female) with males representing up to five year-classes or more. Gametes from several generations of males per spawning event may be important for maintaining the genetic viability of this population with few female spawners per year. The amount of spawning was dependent on precipitation just prior to and during the spawning period since migrants could not enter the stream under drought conditions. Migrants did not overwinter in the stream.
Drought also caused variable fry mortality following emergence in early summer. Recruitment of 0+ parr in autumn varied from c . 175 to 3000 during 3 years. Smolts were relatively young (ages 1–2) and small (≥8 cm), and were significantly longer on average than sibling parr. Yet emigration of 1-year-olds was not related to 0+ parr size the previous autumn because of overlapping growth rates.
Persistence of the migratory brown trout in this unstable environment may be the consequence of (i) life history adaptation (e.g. short freshwater residence of both juveniles and spawners), and (ii) a complementary set of individual life histories where variation in age of migrant spawners and the occurrence of mature male parr result in a stable spawner population despite inconsistent recruitment of migrants to the sea.     

Characterization of mode II-wear particles and cytokine response in a human macrophage-like cell culture.

Informations about wear particles in metallosis (mode II wear) and their effects in vitro and in vivo are limited. The aim of this study was to characterize wear particles obtained intraoperatively and to analyse their effects on cytokine response in an established human macrophage-like cell culture model. METHOD: Wear particles were obtained intraoperatively from four patients with metallosis resulting from CrCoMo/PE/TiAIV-implants (mode II wear) (3 knee, 1 hip prosthesis). After purification, particles were characterized regarding to their composition and size (particle size analyser, electron microscopy, edx-analysis, histological slices). The effects of particles on the release of cytokines (PDGF, IL-1beta, IL-8, TNF alpha) were determined in an established human macrophage-like cell culture system by ELISA-assays. RESULTS: The metal wear particles consisted of TiAIV with a mean size of 0.1 +/- 0.15 microm, independent of the prosthesis location. CrCoMo particles could not be detected. In the cell culture model 1456 x 10(8) particles per 1 x 10(6) macrophages released maximum amounts of TNFalpha (8-fold) and IL-8 and IL-1beta (5-fold) while the survival rate of the cells was more than 90 percent. A particle-dependent increase of PDGF-levels could not be detected. CONCLUSION: As already shown for mode I wear particles (contact between primary bearing surfaces), also mode II wear particles cause release of bone resorbing cytokines in a macrophage-like cell culture model. Because their local and systemic effects in vivo are still not completely understood, we recommend a complete removal of wear particles in cases of metallosis to avoid possible immunological reactions of the body as well as periprosthetic osteolysis.     

THE POPULATION DYNAMICS OF NORTHERN SEA LIONS, 1975-1985

Abstract: Populations of northern sea lions ( Eumetopias jubatus ) in the vicinity of Marmot Island, Alaska declined during 1975–1985 at about 5% per year (Merrick et al. 1987). The cause of this decline is not known. A life table for the northern sea lion was calculated assuming that life spans follow a Weibull distribution. Samples of northern sea lions taken in the vicinity of Marmot Island, Alaska during 1975–1978 and 1985–1986 indicate that the average age of females older than 3 yr increased about 1.55 yr (SD = 0.35 yr) while the population was declining at about 5% per year. Fecundity rates decreased by 10% over the same period, but the decrease was not statistically significant (Calkins and Goodwin 1988). Possible causes of the population decline and the change in age structure were examined by writing the Leslie matrix population equation in terms of changes in juvenile and adult survival rates and fecundity, and examining the short–term behavior of the trajectories of the average age of adult females, total number of females, and total number of pups with respect to those changes in the vital parameters. From the observed rate of declines of adults and the changes in average age of adult females and fecundity, estimates of the changes in adult and juvenile survival were calculated; estimates of the standard deviations of these changes were estimated via a bootstrap procedure. One purpose of this exercise is to aid in setting priorities for research for determining the cause of the decline. An explanation for the observed declines in numbers of adult sea lions consistent with the observed fecundity rates, a rate of decrease of 5% in the number of adults, and the corresponding increase in average age (of females age 3 yr and older) was a 10%–20% decrease in the survival of juveniles (age 0-3 yr) coupled with an insignificant change in adult survival (0.03%, SD = 1%).     

Volumetric computerized tomography as a measurement of periprosthetic acetabular osteolysis and its correlation with wear

Osteolysis, which is considered to be a major source of morbidity following total hip joint replacement, has been notoriously difficult to measure accurately, particularly in the acetabular area. In order to study periacetabular osteolysis, specialized software for computerized tomography (CT) scan image analysis has been developed. This software (3D-CT) eliminates metal artifacts, allows three-dimensional segmentation of the CT image, and reconstructs the segmented image to provide an accurate representation and measurement of volume for osteolytic lesions. In the present study, 20 patients underwent periacetabular osteolytic volume determination using 3D-CT, functional assessment (using the Harris Hip Scale, the Western Ontario and McMaster University Osteoarthritis Index, and the short form 36 questionnaire), and two-dimensional analysis of volumetic polyethylene wear using digitalized plain films. Periacetabular osteolysis correlated directly with the polyethylene wear rate (relative risk [RR] = 0.494, P = 0.027). If one patient with an acetabular revision, one patient with recurrent dislocation, and one patient with a Biomet prosthesis are excluded, then the correlation between wear and osteolysis is improved (RR = 0.685, P = 0.002). In summary, the current study demonstrates both the feasibility of CT imaging of periacetabular osteolysis and the correlation between polyethylene wear and osteolytic volume, providing a potential outcome measure for clinical trials that are designed to examine interventions in this complex disease process.     

甘肃旱作大豆全膜双垄种植的土壤水热及产量效应

以晋豆23为材料,在甘肃省农业科学院镇原试验站进行田间试验,研究了全膜双垄沟播(FMRFC)、覆膜沟播(FMFC)、覆膜条播(FMSC)和露地条播(NMSC,CK)4个处理的水热及产量效应.结果表明: 在大豆生育期降水量为246.3 mm(干旱年)和407 mm(丰水年)两种年型下,各覆盖处理0～20 cm土层平均地温在24 h内呈“S”型变化,并随生育进程波动振幅缩小.各覆盖处理使大豆苗期(VE～V3)至鼓粒期(R6)0～20 cm土层平均土壤温度显著提高0.5～2.5 ℃,并使全生育期平均地温提高1.3～1.6 ℃.各覆盖处理分别加速了大豆植株对0～120 cm土层土壤水分的消耗,但使0～200 cm土层的平均含水量和贮水量分别提高了1.2%～1.4%和62.7～70.3 mm.与CK相比,FMRFC和FMFC在旱年增温增湿作用显著,改善了大豆株高、分枝数、单株荚数和百粒重等经济性状,使水分利用效率分别提高47.7%～56.3%和33.3%～35.4%,产量分别提高27.7%～51.1%和10.2%～25.2%,是旱作大豆优选的抗寒抗旱覆盖种植方式.     

黄土高原半干旱区苜蓿草地土壤干燥化特征与粮草轮作土壤水分恢复效应

实地测定了黄土高原半干旱区固原不同生长年限苜蓿草地和连作8a苜蓿草地翻耕轮作不同年限粮食作物后深层土壤水分特征,分析了苜蓿草地土壤干燥化特征和粮草轮作对土壤水分的恢复效应.结果表明:(1)苜蓿连作1a、5a、8a和12a等4类苜蓿草地0～1000cm土层平均土壤湿度值为6.6%,平均土壤水分过耗量702.8mm,平均土壤干燥化速率147.1mm/a,达到强烈干燥化程度,苜蓿连作5a土壤干层深度超过1000cm,苜蓿连作8a土壤干层深度超过1360cm,苜蓿草地合理利用年限为7a.(2)连作8a苜蓿草地翻耕并轮作4～7a和25a粮食作物等5类粮田0～1000cm土层土壤湿度介于6.74%～11.95%,土壤贮水量恢复值介于210.6～887.3mm,平均土壤水分恢复速率为80.8mm/a.轮作6a后粮田土壤干层轻度恢复程度以上深度达到1000cm.通过粮草轮作使苜蓿草地土壤湿度恢复到当地土壤稳定湿度需要13a以上.黄土高原半干旱区适宜的粮草轮作模式为:7a苜蓿→13a粮食作物.     

A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis

Osteolysis and loosening of artificial joints caused by polyethylene wear debris has prompted renewed interest in alternative bearing materials for hip prosthesis designs. Lower wearing metal-on-metal (MOM) and ceramic-on-ceramic prostheses are being used more extensively, and there is considerable interest in further improving on their performance. This study investigated the wear properties and debris morphology of a novel differential hardness ceramic-on-metal (COM) prosthesis, in comparison with MOM articulations in a physiological anatomical hip joint simulator.The COM pairings were found to have wear rates approximately 100-fold lower than the MOM pairings. The MOM pairings showed a higher "bedding in" wear rate (3.09+/-0.46mm(3)/10(6) cycles) in the first million cycles, which then reduced to a steady state wear rate of 1.23+/-0.5mm(3)/10(6) cycles. The wear rate of the COM pairings over the duration of the test was approximately 0.01mm(3)/10(6) cycles with very little wear detected on the surface of the prosthesis components.The wear particles from both articulations were oval to round in shape and in the nanometer size range. After one million cycles the mean maximum diameter of the MOM and COM wear particles were 30+/-2.25 and 17.57+/-1.37nm, respectively. After five million cycles the wear particles were statistically significantly smaller than at one million cycles, 13.9+/-0.72nm for the MOM pairings and 6.11+/-0.40nm for the COM pairings.The wear rates of the MOM prostheses were representative of clinical values. The use of differential hardness COM pairings dramatically reduced the wear rate compared to MOM hip prostheses. The wear particles from the MOM articulation were similar to particles found in retrieved tissues from around MOM prostheses. The extremely low wearing differential hardness COM bearings presented in this study produced far smaller volumetric particle loads compared to MOM prostheses currently used clinically.     

Relationship between body size and habitat complexity preference in age-0 and -1 year winter flounder Pseudopleuronectes americanus

The interaction between body size, habitat complexity and interstice width on habitat preference of age-0 and -1 year Pseudopleuronectes americanus was examined using continuous remote video observation. The habitat choices of juvenile P. americanus were recorded over a 6 h period in tanks with four treatments: bare sand, sand with low complexity cobble, sand with intermediate complexity cobble and sand with high complexity cobble. Both age-0 and -1 year fish preferred cobble to bare sand. Within cobble treatments, age-0 year fish preferred intermediate complexity cobble, with a 1.59 ratio of interstitial space to body width. The largest age-1 year fish (123-130 mm standard length, L(S) ) preferred low complexity cobble. While a significant preference was not detected, medium age-1 year fish (83-88 mm L(S) ) tended to select low complexity cobble, whereas small age-1 year fish (73-82 mm L(S) ) tended to select low and intermediate cobble, with an interstitial space to body width ratio of 1.05. For medium and large age-1 year fish, there was an increased selection of low complexity cobble, corresponding to larger interstitial space to body size ratios. This study indicates that juvenile P. americanus prefer complex habitat to unstructured habitat and that this preference is mediated by a relationship between fish body size and the size of structure interstices. These results contribute to the growing body of knowledge of complex habitat selection and drivers of habitat choice in flatfishes.