Distraction osteogenesis: a new surgical technique for use with the multiplanar mandibular distractor

If distraction osteogenesis is to reach its full potential and achieve the level of accuracy that is possible with orthognathic surgery, its outcomes need to be as predictable. To this end, the authors developed a planning process for distraction osteogenesis similar to that used in orthognathic surgery. However, the success of the planning process depends on the authors' ability to execute the plan at the time of surgery. As a result, the authors needed to develop a surgical technique that would enable them to precisely install the distractor as indicated in the presurgical plan. The surgical technique presented in this article was developed for this purpose. The authors used this technique in seven patients (four boys and three girls; age range, 4 to 10 years). Four patients presented with unilateral deformities, and three patients presented with bilateral deformities. The follow-up period in this group of patients ranged from 12 to 33 months. The purpose of the technique is to replicate the position of the distractor on the mandible as determined by the presurgical plan. To this purpose, a custom drill guide and a surgical template have been developed. Both of these are used following the principles of triangulation to establish the pin position and orientation of the distractor. In the authors' hands, the use of this surgical technique has resulted in outcomes close to those predicted by the planning process.     

Effect of distraction osteogenesis of the mandible on upper airway volume and resistance in children with micrognathia

Children with craniofacial anomalies often have compromise of the upper airway, a condition with potential for morbidity and mortality. In children with microretrognathia, the diminutive size and retruded position of the mandible reduces the size of the oropharynx, thereby predisposing to glossoptosis and airway obstruction. Although several authors have reported successful use of mandibular distraction osteogenesis to alleviate this type of upper airway obstruction, the physiologic relationship between changes in mandibular shape, size, and position and upper airway dynamics remains undefined. The purpose of this study was to develop methodologies to quantitatively evaluate upper airway dynamics in children with micrognathia both before and after mandibular distraction osteogenesis. The patient population consisted of four children with micrognathia who had successfully undergone upper airway stabilization by bilateral mandibular distraction osteogenesis. The data used were digitally archived computed tomographic scan data from high-resolution, thin-slice head computed tomographic scans obtained before and after mandibular distraction. Upper airway evaluation was performed in two ways: static and dynamic. Static analysis consisted of computer quantification of predistraction and postdistraction mandibular and upper airway volumes using Analyze imaging software. Dynamic analysis consisted of fabrication of rigid stereolithographic hollow cast models of the upper airway produced from computed tomographic scan data. Models were used for characterization of upper airway resistance and flow patterns as related to respiration. After distraction osteogenesis, mandibular total volume increased 32, 32, 18, and 25 percent (mean, 27 percent) and upper airway volume increased by 20, 31, 23, and 71 percent (mean, 37 percent). A significant decrease in flow resistance, both inspiratory and expiratory, was observed in the patient with the greatest upper airway volume increase (71 percent) after distraction. After distraction, the inspiratory resistance was diminished by 51 percent and the expiratory resistance diminished by 85 percent. However, the three patients with more modest upper airway volume increases of 20 to 31 percent demonstrated no statistically significant change in flow resistance after distraction. Results of this study support the conclusion that distraction osteogenesis of the micrognathic mandible increases the volume of the upper airway, roughly paralleling the increase in mandibular volume. In the biomechanical airway model studied, upper airway volume expansion has been shown to be able to decrease the flow resistance over the length of the airway, presumably secondary to an increase in the average cross-sectional area. The artificial rigidity of the stereolithographic "airway" compared with the elasticity of the human upper airway may account for the insensitivity of this model to smaller but clinically significant airway changes.     

Manipulation of callus after linear distraction: a "lifeboat" or an alternative to multivectorial distraction osteogenesis of the mandible?

Despite impressive results, distraction osteogenesis of the mandible is still compromised by difficulties with vector control. Because of the action of the masticatory muscles, the gonion angle has the tendency to open, resulting in an open bite. We report two patients, aged 10 and 12 years, who developed a severe open bite during mandibular distraction. As a salvage procedure, manual shaping of the soft regenerate was done immediately after distraction. Uneventful bony consolidation was observed, which resulted in anatomically shaped gonion angles. The fact that a regenerate created by distraction osteogenesis can be molded to virtually any shape offers interesting perspectives for the correction of complex mandibular deformities.     

Expression of bone morphogenetic proteins during mandibular distraction osteogenesis

Distraction osteogenesis is a form of in vivo tissue engineering in which the gradual separation of cut bone edges results in the generation of new bone. In this study, the temporal and spatial expression of bone morphogenetic proteins (BMPs) 2, 4, and 7 was examined in a rabbit model of mandibular distraction osteogenesis. Fourteen skeletally mature male rabbits were studied. After osteotomy, a distractor was applied to one side of the mandible. After 1 week of latency, distraction was initiated at 0.25 mm every 12 hours for 3 weeks (distraction period), followed by a 3-week consolidation period. Two animals were killed each week after surgery. The generate bone was analyzed for the expression of BMP-2, -4, and -7 by using standard bone histological and immunohistochemical techniques. BMP-2 and -4 were highly expressed in osteoblastic cells during the distraction period and in chondrocytes during the consolidation period. BMP-7 demonstrated relatively minor expression in osteoblastic cells during the distraction period. All BMPs were strongly expressed in vascularized connective tissue during the distraction period. These data indicate that BMPs participate in the translation of mechanical stimuli into a biological response during mandibular distraction osteogenesis.     

三维颌骨牵张治疗下颌骨畸形的临床分析

目的:探讨三维颌骨牵张治疗颌骨畸形的临床效果。方法:回顾性分析我院2005年1月-2011年6月收治的颌骨畸形患者42例,根据牵张方法不同分为观察组和对照组,观察组采用三维颌骨牵张,对照组采用平行于矢状轴方向进行牵张,比较两组的牵张效果。结果:术后随访6～24个月,两组牵张时间进行比较,t=7.824,P<0.05,两组牵张时间差异有统计学意义。观察组无牵引器松动而发生发生牵张失败的病例,观察组无失败病例,对照组为6例,占28.57%,x2=4.861,P<0.05,两组牵张失败率差异有统计学意义。观察组与对照组患者咬颌关系(x2=5.091,P<0.05)、颞颌关节(x2=6.431,P<0.05)、颜面外观(x2=4.434,P<0.05)比较,两组差异有统计学意义。结论:三维颌骨牵张法能达到成骨快,成骨质量高的要求,因此在下颌骨正畸过程中适宜采用三维颌骨牵张法。     

Distraction osteogenesis of the craniofacial skeleton

In summary, distraction osteogenesis is a safe and effective means of achieving bone lengthening. These techniques were originally applied to the long bones of the extremities; over the past 10 years they have been effectively applied to the bones of the craniofacial skeleton. The new bone regenerate that is observed after distraction osteogenesis is stable, and relapse rates after skeletal advancement are believed to be lower than with conventional osteotomy and bone graft techniques. There is considerable variability in distraction protocols employed in clinical practice, including differences in the types of devices used and in the rate, rhythm, latency, and period of consolidation for distraction osteogenesis. The greatest application for distraction osteogenesis in the craniofacial skeleton has been with mandible lengthening, for which there is presently a 10-year clinical experience. Midfacial advancement is a newer application of distraction osteogenesis, for which clinical experience has been accrued over the past 5 years. This latter experience indicates that distraction osteogenesis is a viable treatment option for lengthening of the hypoplastic mandible and midface. These techniques have advantages over conventional means of bone graft and rigid fixation because of the quality of the bone regenerate, the decrease in the long-term relapse rate of the advanced bone segments in both the mandible and the midface, and the simultaneous soft-tissue elongation that accompanies the distraction process. Distraction osteogenesis is particularly applicable to the correction of severe deformities of the mandible and midface in children with developmental hypoplasia and syndromic craniosynostosis. However, growth is an added variable in this patient population. The amount of overcorrection in lengthening of the hypoplastic bone required to compensate for continued growth discrepancy of the adjacent facial bones is difficult to predict. Therefore, the families of these patients should be informed that many children will require repeated operations at a later age as they reach skeletal maturity.     

Validation of a musculo-skeletal model of the mandible and its application to mandibular distraction osteogenesis

Mandibular distraction osteogenesis will lead to a change in muscle coordination and load transfer to the temporomandibular joints (TMJ). The objective of this work is to present and validate a rigid-body musculo-skeletal model of the mandible based on inverse dynamics for calculation of the muscle activations, muscle forces and TMJ reaction forces for different types of clenching tasks and dynamic tasks. This approach is validated on a symmetric mandible model and an application will be presented where the TMJ reaction forces during unilateral clenching are estimated for a virtual distraction patient with a shortened left ramus. The mandible model consists of 2 rigid segments and has 4 degrees-of-freedom. The model was equipped with 24 hill-type musculotendon actuators. During the validation experiment one subject was asked to do several tasks while measuring EMG activity, bite force and kinematics. The bite force and kinematics were used as input for the simulations of the same tasks after which the estimated muscle activities were compared with the measured muscle activities. This resulted in an average correlation coefficient of 0.580 and an average of the Mean Absolute Error of 0.109. The virtual distraction model showed a large difference in the TMJ reaction forces between left and right compared with the symmetric model for the same loading case. The present work is a step in the direction of building patient-specific mandible models, which can assess the mechanical effects on the TMJ before mandibular distraction osteogenesis surgery.     

Distraction osteogenesis of costochondral bone grafts in the mandible

Costochondral grafting for reconstruction of the Pruzansky type III mandible has given variable results. Lengthening of the rib graft by means of distraction had been advocated when subsequent growth of the grafted mandible is inadequate. This retrospective study reviews a series of patients with mandibular costochondral grafts who underwent subsequent distraction osteogenesis of the graft. A retrospective review identified two patient groups: group 1 consisted of individuals (n = 9) who underwent costochondral rib grafting of the mandible followed by distraction osteogenesis several months later at a rate of 1 mm/day. Group 2 consisted of patients with Pruzansky type II mandibles who had distraction osteogenesis without prior rib grafting (n = 9). The biomechanical parameters, orthodontic treatment regimens, and complications were examined versus patient age and quality of the rib graft. Distraction osteogenesis was successfully performed in six of the rib graft patients (group 1) and in all of the group 2 individuals. On the basis of the Haminishi scale, the computed tomographic scan appearance of the regenerate was classified as "standard or external" in six of the group 1 patients and as either "agenetic" or "pillar" (fibrous union) in the remaining three patients. In group 1, the average device was expanded 23 mm (range, 20 to 30 mm). Group 2 mandibular distraction results were all classified as either standard or external, and there was an average device expansion of 22.4 mm (range, 16 to 30 mm). The length of consolidation averaged 12.6 weeks in group 1, compared with 8.5 weeks in the traditional mandibular distraction patients (group 2). The mean shift of the dental midline to the contralateral side was 2.5 mm in group 1 versus 4.0 mm in group 2. Complex multiplanar and transport distractions were successfully performed on grafts of adequate bony volume. All four patients in group 1 with tracheostomies were successfully decannulated after consolidation. Rib graft distraction complications included pin tract infections in two patients, hardware failure with premature pin pullout in one patient, and evidence of fibrous nonunions in three young patients with single, diminutive rib grafts. In group 2, there were no distraction failures. Distraction osteogenesis can be successfully performed on costochondral rib grafts of the mandible; however, the complication rate is higher than in non-rib-graft patients. Performing the technique on older, more cooperative individuals seems to reduce this risk. In addition, placement of a double rib graft or an iliac bone graft of sufficient volume to create a neomandible with greater bone stock is an absolute requirement to decrease the risk of fibrous nonunion and provide a bone base of sufficient size for retention of the distraction device and manipulation of the regenerate.     

Mandibular distraction in neonates: a strategy to avoid tracheostomy

Over the past 5 years, the authors developed an application of mandibular distraction osteogenesis to eliminate existing tracheostomy. That experience led the authors to attempt mandibular distraction osteogenesis in neonates as an alternative before tracheostomy. Success with this approach using supporting objective airway measurements has been reported previously. This report includes six neonates diagnosed with Pierre Robin sequence. Of the six, five neonates ranging in age from 6 to 26 days (mean, 14.5 days) were treated by the authors with mandibular distraction over a 22-month period. The sixth neonate was treated with tracheostomy, because of other airway abnormalities. Findings included retrognathia, glossoptosis, incomplete cleft palate, and airway obstruction in each patient. Birth weights ranged from 2.8 to 3.2 kg. All patients were unable to control their airway during feeding, as evidenced by repeated episodes of choking and obstruction. Resting oxygen saturations were in the 70 to 80 percent range in all patients, with further deterioration during attempted feeding. Bronchoscopy was performed in all patients under anesthesia before distraction. Recurrent near-complete and intermittent complete airway obstruction were present in all patients at the level of the tongue base. There was a consensus by a pediatric intensivist, a pediatric anesthesiologist, and a pediatric otolaryngologist in all cases. Each patient met all criteria requiring ventilation for life support. Tracheostomy would be required if mandibular distraction osteogenesis was not performed, or if it failed. Patients with other airway abnormalities were not considered for treatment. Maxillomandibular disharmony measured at the midline ranged from 8 to 15 mm (mean, 11.2 mm). Active distraction was performed at the rate of 1 to 2 mm a day, with a consolidation period of 4 weeks. Total time of treatment was less than 6 weeks in all cases. All patients were extubated by the completion of active distraction. Distraction distance ranged from 8 to 15 mm (mean, 12.4 mm). All patients were discharged to home on apnea monitors, the use of which was discontinued after 90 days with no further apneic events. Weight gains met or exceeded the average 500 g a month after distraction. Bronchoscopy at the time of distractor removal showed correction of airway obstruction at the tongue base. Radiographs showed bilateral ossification of the distraction sites. Tracheostomy was avoided in all cases selected for treatment by distraction. Patient follow-up range was 9 to 22 months. In selected Pierre Robin sequence patients with tongue base airway obstruction, mandibular distraction osteogenesis can successfully avoid the need for and the associated mortality and morbidity of indwelling tracheostomy.     

Remodeling of the temporomandibular joint following mandibular distraction osteogenesis in the transverse dimension

Transverse mandibular distraction osteogenesis involves moving the osteotomized segments of the mandible in either a varus or valgus direction. This maneuver allows for widening of the bigonial distance or for a lateral shift of an asymmetric mandibular midline. During this process, a significant amount of torque is placed on the mandibular condyles, because they act as the pivot point for the mandibular translation. Although standard linear distraction osteogenesis induces transient, reversible changes in the temporomandibular joint, it is not known what effect the varus and valgus stresses of transverse distraction have on the temporomandibular joint. We therefore designed a study to document the temporomandibular joint changes following various degrees of transverse distraction.Bilateral transverse mandibular distraction was performed on 10 adult, female mongrel dogs using an external, multiplanar mandibular distraction device. The distraction protocol was as follows: (1) complete osteotomy at the angle of the mandible, (2) 5-day latency period, (3) distraction rate of 1 mm/day, (4) rhythm of one turn per day, (5) linear activation 16 to 30 mm bilaterally, and (6) 8-week consolidation period. A variety of varus and valgus distraction vectors were applied to the mandible only after 10 mm of initial linear distraction had been achieved. Posteroanterior and lateral cephalograms were performed throughout the entire process. Pre-distraction and post-consolidation computed tomographic scans were also performed. Changes in mandibular conformation, axis of rotation, temporomandibular joint structure, and glenoid fossa changes were directly assessed by evaluating the postmortem craniofacial skeleton. The findings were compared with those of normal, age-matched mongrel dog skulls.Significant remodeling changes were observed in the temporomandibular joints of all animals involved in the study. The mandibular condyles demonstrated varying degrees of flattening and erosion at all contact points with the craniofacial skeleton. In some cases, the condyle became part of the distraction regenerate process and was hypertrophied in all dimensions. The condyles were frequently displaced out of the glenoid fossa, particularly on the side in the direction of varus distraction. When the latter occurred, a new fossa was created on the undersurface of the zygomatic arch. Varying degrees of mandibular rotation in the sagittal plane were also observed, which led to abnormal torquing of the condyles in the coronal plane, depending on whether the axis of rotation occurred primarily around the condyle or around the distraction regenerate zone.In conclusion, transverse mandibular distraction is an effective means of producing a varus or valgus shift in the gonion relative to the midsagittal plane. However, unlike linear or angular mandibular distraction, transverse distraction has a multitude of nontransient effects on the temporomandibular joint. Therefore it must be emphasized that in clinical practice, transverse distraction should be used cautiously. One must also be aware that such a maneuver in distraction can have negative effects on the temporomandibular joint.     

Distraction osteogenesis of the porcine mandible: histomorphometric evaluation of bone

Distraction osteogenesis is a technique for skeletal lengthening that exploits the body's innate capacity for bone formation in response to tension forces on the repair callus. The authors developed a distraction osteogenesis model with a semiburied device in the Yucatan minipig mandible because of similarities between human and porcine mandibular anatomy, temporomandibular function, chewing patterns, and bone turnover rates. The purpose of this study was to measure histomorphometric bone fill after different latency periods, rates of distraction, and duration of neutral fixation in the minipig mandible. In addition, the relationship between histomorphometric bone fill and clinical stability was investigated. Mandibular osteotomies in 20 female Yucatan minipigs weighing 25 to 30 kg were distracted with modified semiburied distraction devices. Variables included 0-day or 4-day latency; 1-mm, 2-mm, or 4-mm daily distraction rates; gap size of 7 or 12 mm; and evaluation after neutral fixation for various lengths of time. Specimens were fixed in 2% paraformaldehyde, pH 7.4, before being embedded in methylmethacrylate. Sections were prepared from the region just below the inferior alveolar canal. The area of new bone formation within the gap was measured and expressed as a percentage of the total area of the distraction gap. Bone fill ranged from 0 to 100 percent. A pilot study with 7-mm advancements showed similar bone fill with 0-day or 4-day latency, but with poor reproducibility. Mandibles that were distracted to 12 mm at 1 mm per day exhibited nearly complete bone fill, either with 0-day latency (average, 93 percent) or 4-day latency (average, 100 percent). Mandibles that had been distracted for 3 days at 4 mm per day showed moderate osteogenesis and clinical stability with increasing time of neutral fixation. Bone fill was significantly correlated with clinical stability (Spearman r = 0.801, p = 0.001). Histological examination showed exuberant periosteal osteogenesis in distracted mandibles, even in those that showed poor bone fill and clinical stability. Thus, the periosteum appears to be a major source of new bone formation. These results show that osteogenesis was nearly complete with 1 mm per day and 0-day or 4-day latency. These results are consistent with the authors' previously reported clinical and radiographic observations that a latency period is not necessary for successful healing of the mandibular distraction osteogenesis wound.     

Volumetric change of the medial pterygoid following distraction osteogenesis of the mandible: an example of the associated soft-tissue changes

Mandibular distraction osteogenesis lengthens not only the affected skeleton but also the associated muscles of mastication. The purpose of this study was to determine medial pterygoid volume before and after distraction by using computed tomography. Using computed tomographic scans, the volume of the medial pterygoid muscle was determined before and after mandibular distraction in six pediatric patients. In four unilateral distraction patients (average age, 65 months), the average increase of the medial pterygoid muscle on the distracted side of the mandible was 29 percent, and on the contralateral nondistracted side, 10 percent. The average increase in medial pterygoid muscle volume in two bilateral distraction patients (each aged 8 months) was 75 percent. Results of this study demonstrate that distraction osteogenesis of the human mandible not only lengthens deficient bone, but it also increases the volume of the attached musculature.     

Mechanical behavior of an osteotomized mandible with distraction orthodontic devices

This work analyzes the mechanical behavior of a human mandible when distraction orthodontic devices are used for correcting problems of dental overcrowding and/or arch shrinkage. The mandible 3D model is reconstructed from CT scan data and meshed into finite elements. The distractor is also modeled. FEM analysis included geometric non-linearity. Displacement field of healthy and osteotomized mandibles are compared. Progressive expansion of the distractor and effects of mastication are also analyzed. Finally, we compare two distraction protocols PROT1 and PROT2 where device is, respectively, expanded by 0.6 or 1.2mm/day. The global displacement is 6mm according to clinical recommendations. It came out that mastication forces generate displacements compatible with bone remodeling. However, parasitic rotations of the mandible arms due to mastication may counteract arch expansion induced by the device. Stress concentrations occurred where the device is fixed: stress peaks stay however below yield limit. Finally, PROT2 reduced by about 10% stresses in mandible and reproduces better than PROT1 the displacement field imposed by the device.     

下颌骨牵张成骨中不同牵张频率对牵张区成骨细胞增殖细胞核抗原表达的影响

目的:对比研究下颌骨牵张成骨中不同牵张频率的作用下新骨组织中成骨细胞的增殖活性,从而筛选出最佳牵张频率。方法:选用16只3月龄的幼年山羊,随机分为4组,每组4只,第1组为对照组,分别对第2、3、4组动物右下颌骨行骨皮质切开术后进行牵张,第2组牵张频率为2次/天,第3组牵张频率为4次/天,第4组牵张频率为6次/天,于完成牵张后4周时分别处死动物,取牵张区新骨组织和对照组右下颌骨颏孔区骨组织行PCNA免疫组化染色并进行组间比较。结果:各牵张组牵张区新生骨组织中成骨细胞PCNA表达的阳性细胞数均显著高于对照组,6次/天牵张组和4次/天牵张组牵张区中成骨细胞PCNA表达的阳性细胞数显著高于2次/天牵张组,但6次/天牵张组和4次/天牵张组成骨细胞PCNA表达的阳性细胞数无显著性差异。结论:在下颌骨牵张成骨进程中,随着牵张频率的增加,牵张区成骨细胞的增殖能力提高,可能术后成骨效果更佳。     

Use of virtual surgery and stereolithography-guided osteotomy for mandibular reconstruction with the free fibula

Fibular osteotomy remains a challenging aspect of mandibular microsurgical reconstruction, dependent largely on surgeon experience, intraoperative judgment, and technical speed. Virtual surgical planning and stereolithographic modeling is a relatively new technique that can allow for reduction in the learning curve associated with neomandible contouring, enhanced levels of accuracy, and acceleration of a time-consuming intraoperative step. The authors present a video (narrated and edited from planning sessions and intraoperative use of technique to illustrate the technology) and describe their favorable results. Five patients underwent composite resection of the mandible and free fibula osteocutaneous reconstruction over a 6-month period (December of 2009 to June of 2010) at a single institution using a virtual planning session and stereolithographic modeling. Outcomes assessed included technical accuracy, aesthetic contour, and functional outcomes. All patients achieved negative margins with cutting guide-directed resection. Use of this technique eliminated the need for intraoperative measurement and yielded fibular segments with excellent apposition and faithful duplication of the preoperative plan. Minimal adjustments were needed for inset. Flap survival was 100 percent. All patients have maintained preoperative occlusion and a symmetric mandibular contour on Panorex study, three-dimensional computed tomography, and clinical examination. Accuracy of the reconstructed contour was confirmed using computed tomographic image overlay. This virtual surgical planning technique combined with stereolithographic model-guided osteotomy is the mainstay of the authors' approach to fibular osteotomy when dealing with patients requiring mandibular reconstruction. The authors feel this technology facilitates realization of technical accuracy, aesthetic contour, and functional outcomes and may be particularly useful if free fibular mandibular reconstruction is performed less frequently. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.     

Effects of mandibular distraction osteogenesis on the inferior alveolar nerve: an experimental study in monkeys

A series of experimental studies were performed in monkeys to study the effect of mandibular distraction osteogenesis on the inferior alveolar nerve at different times before and after distraction. A mandible osteotomy was performed and distraction was carried out unilaterally in 10 young rhesus monkeys and bilaterally in six. The intact nerves on the contralateral side of the 10 monkeys were used for the control. Care was taken to avoid destroying the integrity of the inferior alveolar nerve during the surgical procedure. After a 5-day latency period, the distraction device was activated at a rate of 0.5 mm twice each day for 15 days. Sensory nerve action potential testing was applied before and 1 day after the operation, at completion of distraction, and at 2, 4, 6, 9, and 12 weeks of fixation. Necropsy was performed at the completion of distraction and 2, 4, 6, and 12 weeks of fixation. The mental nerves were taken, sectioned, and stained with lead citrate and uranyl acetate, and examined with a transmission electron microscope. The inferior alveolar nerves in the distraction gap were obtained, and paraffin slides were made and stained with hematoxylin and eosin, Luxol fast blue, and Bodian methods. The authors found that immediately after the mandible osteotomy, most nerves showed signs of slight acute injury; the latency was increased by 5.553 percent, and the amplitude was decreased to 1808 microV. This might be caused by the surgical procedure or by compressions produced by swelling tissues around the nerves. When distraction was completed, the latency was prolonged for an average of 22.18 percent, and the amplitude average had attenuated to 28.54 percent (804 microV) of the preoperative value on the distracted side. Most nerve fibers exhibited signs of degeneration, such as myelin disruption, swelling of cell organs greatly increased in axoplasm, axon tearing, and myelin fragments engulfed by macrophages. These were nerve reactions to the tensions produced by mandible lengthening. As time elapsed, the nerve's action potential recovered gradually because of its repairing ability, the latency shortened, amplitude increased, Schwann cells proliferated and formed new myelin sheaths, and the tearing axons reconnected. After 12 weeks of consolidation, there was still a latency of 12.384 percent prolongation because of the prolonged conduction distance, and the average amplitude was restored to 2786 microV, the approximate preoperative value. The nerve seemed to be repaired completely; its myelin thickness, axon diameter, and ultrastructure were all similar to those of the control. It was concluded that mandibular distraction osteogenesis can produce some degree of harmful effects on the function and structure of inferior alveolar nerves, but it is reversible and relatively slight. Along with the regeneration of the nerve's myelin and axon, the nerve function can gradually rehabilitate to a normal level.     

Focal adhesion kinase expression during mandibular distraction osteogenesis: evidence for mechanotransduction

Distraction osteogenesis is an established treatment strategy in the reconstruction of the craniofacial skeleton. The underlying mechanisms that drive bone formation during this process are largely unknown, but a regulatory role for mechanical force is believed to be critical. The integrin-mediated signal transduction cascade is a primary pathway by which signal transduction of mechanical stimuli (i.e., mechanotransduction) occurs. Focal adhesion kinase (FAK) is a significant regulator in this pathway. The authors hypothesize that mechanical forces created during distraction osteogenesis are responsible for the osteogenic response that takes place, and that these changes arise through integrin-dependent mechanotransduction. Using a rat model of distraction osteogenesis, the authors examined the expression of FAK in critical size defects (n = 15), subcritical size defects (n = 15), and mandibles undergoing distraction osteogenesis (n = 15). Their findings demonstrated FAK immunolocalization in mandibles undergoing distraction osteogenesis, but not in the critical size defects or in subcritical size defects, despite varying degrees of bone formation in the latter two groups. Furthermore, bone sialoprotein mRNA in situ hybridization patterns were found to mirror FAK immunolocalization patterns in mandibles undergoing distraction osteogenesis, demonstrating an association of FAK expression with the osteogenic process specific to distraction osteogenesis. These findings suggest that the bone formation in distraction osteogenesis is regulated by mechanical force by means of integrin-dependent mechanotransduction pathways.     

Evaluation of Inferior Alveolar Nerve Regeneration by Bifocal Distraction Osteogenesis with Retrograde Transportation of Horseradish Peroxidase in Dogs

Background

Bifocal distraction osteogenesis has been shown to be a reliable method for reconstructing segmental mandibular defects. However, there are few reports regarding the occurrence of inferior alveolar nerve regeneration during the process of distraction. Previously, we reported inferior alveolar nerve regeneration after distraction, and evaluated the regenerated nerve using histological and electrophysiological methods. In the present study, we investigated axons regenerated by bifocal distraction osteogenesis using retrograde transportation of horseradish peroxidase in the mandibles of dogs to determine their type and function.

Methods and Findings

Using a bifocal distraction osteogenesis method, we produced a 10-mm mandibular defect, including a nerve defect, in 11 dogs and distracted using a transport disk at a rate of 1 mm/day. The regenerated inferior alveolar nerve was evaluated by retrograde transportation of HRP in all dogs at 3 and 6 months after the first operation. At 3 and 6 months, HRP-labeled neurons were observed in the trigeminal ganglion. The number of HRP-labeled neurons in each section increased, while the cell body diameter of HRP-labeled neurons was reduced over time.

Conclusions

We found that the inferior alveolar nerve after bifocal distraction osteogenesis successfully recovered until peripheral tissue began to function. Although our research is still at the stage of animal experiments, it is considered that it will be possible to apply this method in the future to humans who have the mandibular defects.     

The effects of magnitude and frequency of distraction forces on tissue regeneration in distraction osteogenesis of the mandible.

Callus distraction has become an accepted treatment procedure to lengthen hypoplastic mandibles in humans. For this purpose, extraoral and intraoral devices have been applied successfully. The effects of the distraction vector, distractor stability, and rate and frequency of callus distraction on the regenerating tissues have been examined in various studies. In an experimental animal trial on pigs (n = 12), a newly developed microhydraulic osteodistractor was tested. The animals were evenly assigned to two groups to perform a continuous and noncontinuous osteodistraction of the mandible. Initially, the forces necessary to distract the pig mandibles were recorded from a noncontinuous distraction procedure; the results were then used to perform continuous bone distraction. Besides testing the new distractor, the study proved that in continuous osteodistraction, intramembranous bone regeneration occurred, whereas in noncontinuous osteodistraction the bone regeneration process followed a chondroid ossification. In continuous osteodistraction, the bone regeneration proceeded at a higher speed with the lower distraction forces compared with noncontinuous distraction, thereby reducing the consolidation period. Clinical and microscopical results are presented.