Direct enantioselective HPLC monitoring of lipase-catalyzed kinetic resolution of tiaprofenic acid in nonstandard HPLC organic solvents

The first straightforward lipase-catalyzed enantioselective access to enantiomerically enriched tiaprofenic acid as a versatile method in chiral separation of racemates is demonstrated. The latter was directly monitored by enantioselective HPLC using a 3,5-dimethylphenylcarbamate derivative of cellulose-based chiral stationary phase namely Chiralpak IB (the immobilized version of Chiralcel OD). Non-standard HPLC organic solvents were used as diluent to dissolve the "difficult to dissolve" enzyme substrate (the acid) and as eluent for the simultaneous enantioselective HPLC baseline separation of both substrate and product in one run without any further derivatization. The existence of a non-standard HPLC organic solvent (e.g., methyl tert-butyl ether) in the mobile phase composition is mandatory to accomplish the simultaneous enantioselective HPLC baseline separation of both substrate and product.     

Efficient kinetic resolution of organosilicon compounds by stereoselective esterification with hydrolases in organic solvent

Stereoselective esterification of three isomers of trimethylsilylpropanol, 1-trimethylsilyl-2-propanol, 1-trimethylsilyl-1-propanol, and 2-trimethylsilyl-1-propanol, was systematically studied with five kinds of hydrolases in an organic solvent system in connection with the structure of the compounds. The hydrolases were found to be able to esterify these organosilicon compounds, even -hydroxyalkylsilanes, which are unstable under the conditions of acid-catalysed esterification, and the highly optically active organosilicon compounds were successfully prepared with the selected hydrolases. Even a primary alcohol, 2-trimethylsilyl-1-propanol, was stereoselectively esterified by lipase. Furthermore, comparative studies were made by using their carbon counterparts. The silicon atom in the substrates was found to enhance the enzyme stereoselectivity in some cases, but its effect on the substrate reactivity was dependent on the structure of the substrates. These results are discussed based on the specific characters of the silicon atom. Correspondence to: A. Tanaka     

Kinetic resolution of rac-alkyl alcohols via lipase-catalyzed enantioselective acylation using succinic anhydride as acylating agent

With succinic anhydride as acylating agent, three commercial lipases – Candida antarctica lipase B (CALB), Pseudomonas cepacia lipase and Pseudomonas fluorescens lipase – were employed in the kinetic resolution of a series of rac-alkyl alcohols: 2-butanol, 2-pentanol, 2-hexanol, 2-heptanol, 2-octanol, 3-hexanol, 3-methyl-2-butanol, 6-methyl-5-heptene-2-ol, 3-methyl-2-cyclohexene-1-ol and 2-methyl-1-pentanol. The most effective tested enzyme, immobilized CALB, was able to resolve most of the alcohols with high enantioselectivity, even higher (with enantiomeric ratios up to 115 and 91, for 3-hexanol and 3-methyl-2-butanol, respectively) than when vinyl acetate was used as the acylating agent. More importantly, the unreacted alcohol and the monoester succinate produced could be easily separated by a simple aqueous base-organic solvent liquid–liquid extraction. Using succinic anhydride as acylating agent and CALB, enantiomerically pure (S)-2-pentanol with 99% ee and (R)-2-pentanol with 95% ee were prepared in gram-scale reactions.     

Kinetic resolution of a diltiazem intermediate by lipase-catalyzed enantioselective alcoholysis

A novel enzymatic resolution of an important alcohol intermediate in the Diltiazem process was developed. The enzymatic reaction involved alcoholysis of the alcohol acetate with butanol, thus obtaining the (R,R)-alcohol and the remaining (S,S)-acetoxy-alcohol in >95% enantiomeric excess. This resolution may serve as the key step in a possible recycling procedure for the waste streams of the Diltiazem process, which will allow a significant increase in the overall process yield.     

Optical resolution of racemic 2-hydroxy octanoic acid by lipase-catalyzed hydrolysis in a biphasic membrane reactor

Racemic 2-hydroxy octanoic acid methyl ester was optically resolved by lipase-catalyzed hydrolysis in a biphasic membrane reactor using hydrophilic/hydrophobic capillary membranes. In a buffer/hexane biphasic membrane reactor using hydrophilic ultrafiltration membranes, (S)-2-hydroxy octanoic acid was recovered from the aqueous phase at 59–67% yield and 0.9–0.92 enantiomeric excess (ee), and the ester of (R)-isomer was recovered from the organic phase at 73–75% yield and 0.92–0.99 ee.     

A kinetic study of lipase-catalyzed reversible kinetic resolution involving verification at miniplant-scale

Lipase-catalyzed kinetic resolution of racemates is a popular method for synthesis of chiral synthons. Most of these resolutions are reversible equilibrium limited reactions. For the first time, an extensive kinetic model is proposed for kinetic resolution reactions, which takes into account the full reversibility of the reaction, substrate inhibition by an acyl donor and an acyl acceptor as well as alternative substrate inhibition by each enantiomer. For this purpose, the reversible enantioselective transesterification of (R/S)-1-methoxy-2-propanol with ethyl acetate catalyzed by Candida antarctica lipase B (CAL-B) is investigated. The detailed model presented here is valid for a wide range of substrate and product concentrations. Following model discrimination and the application of Haldane equations to reduce the degree of freedom in parameter estimation, the 11 free parameters are successfully identified. All parameters are fitted to the complete data set simultaneously. Six types of independent initial rate studies provide a solid data basis for the model. The effect of changes in substrate and product concentration on reaction kinetics is discussed. The developed model is used for simulations to study the behavior of reaction kinetics in a fixed bed reactor. The typical plot of enantiomeric excess versus conversion of substrate and product is evaluated at various initial substrate mixtures. The model is validated by comparison with experimental results obtained with a fixed bed reactor, which is part of a fully automated state-of-the-art miniplant.     

Enzymatic resolution of 2-aryloxy-1-propanols via lipase-catalyzed enantioselective acylation using acid anhydrides as acyl donors

Pseudomonas sp. lipase-catalyzed enantioselective acylation procedure using acid anhydrides as acyl donors was exploited for the resolution of 2-aryloxy-1-propanols carrying different substituents on the benzene ring. These primary alcohols, which belong to primary alcohols with an oxygen atom at the stereocenter, were resolved generally with moderate to good enantioselectivity (E of up to 55) through the acylation with hexanoic anhydride in diisopropyl ether at 25 °C in a short reaction time. With the alcohol substrate, which gave a low enantioselectivity in the acylation at ordinary temperature, the selectivity proved to be enhanced by conducting the reaction at low temperature (−10 °C). By this acylation procedure employing the acid anhydride, enantiomerically pure (R)-2-phenoxy-1-propanol was prepared in a gram-scale reaction.     

Modeling and optimization of lipase-catalyzed esterification of policosanols with conjugated linoleic acid by response surface methodology

Abstract

The aim of this study was to model the lipase-catalyzed esterification of policosanols with conjugated linoleic acid (CLA) in a solvent-free system to produce wax esters which had a lower melting point than that of their corresponding policosanol forms and to optimize the reaction conditions by response surface methodology (RSM). Novozym 435 was selected as a suitable biocatalyst for the reaction. The molar ratio of substrates (policosanols to CLA) was 1:2. A well-fitting quadratic polynomial regression model for the degree of esterification (DE) of policosanols with CLA was established with regard to temperature (35–65°C), enzyme loading (1–5% of weight of total substrates), and reaction time (10–50 min). Optimal reaction conditions were 61.3°C for temperature, 3.7% for enzyme loading, and 34.1 min for reaction time, and the DE was ? 95 mol% under these conditions. The policosanols and wax esters synthesized under optimal conditions had melting points of 79°C and 57°C, respectively.     

Synthesis of phosphatidylcholine with defined fatty acid in the sn-1 position by lipase-catalyzed esterification and transesterification reaction

The incorporation of caproic acid in the sn-1 position of phosphatidylcholine (PC) catalyzed by lipase from Rhizopus oryzae was investigated in a water activity-controlled organic medium. The reaction was carried out either as esterification or transesterification. A comparison between these two reaction modes was made with regard to product yield, product purity, reaction time, and byproduct formation as a consequence of acyl migration. The yield in the esterification and transesterification reaction was the same under identical conditions. The highest yield (78%) was obtained at a water activity (a(w)) of 0.11 and a caproic acid concentration of 0.8 M. The reaction time was shorter in the esterification reaction than in the transesterification reaction. The difference in reaction time was especially pronounced at low water activities and high fatty acid concentrations. The loss in yield due to acyl migration and consequent enzymatic side reactions was around 16% under a wide range of conditions. The incorporation of a fatty acid in the sn-1 position of PC proved to be thermodynamically much more favorable than the incorporation of a fatty acid in the sn-2 position.     

Enhanced performance of lipase-catalyzed kinetic resolution of secondary alcohols in monoether-functionalized ionic liquids

Several cationic monoether-functionalized ionic liquids (MEF-ILs) with different substituents were synthesized and used as media for kinetic resolution of secondary alcohols catalyzed by several lipases. The results indicate that Novozym 435 (an immobilized Candida antarctica Lipase B) had higher efficiency compared to other lipases in deracemization. The alkyl substituents at the 2- and 3-positions in the imidazolium ring of MEF-ILs were found to contribute to the increased enantioselectivity and enhancement of the reaction rate, respectively, while the higher stereo-hindrance of ether bonds decreased the activity. An enantioselectivity higher than 99% with 50% conversion of rac-1-phenylethanol was achieved using the catalyst system comprised of Novozym 435 and the MEF-IL 1-(3-ethoxypropyl)-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide. The catalytic system could be separated and reused without considerable activity loss. MEF-ILs can be a new class of enzyme-benign media suitable for lipase-catalyzed kinetic resolution of secondary alcohols.     

Efficient kinetic resolution of 2-benzenesulfonylcyclopentanone derivatives

Efficient kinetic resolution of 2-benzenesulfonylcyclopentanones1, bearing 3-alkyl, 3-aryl, or 3-benzyl substituents, has been achieved by bakers' yeast mediated reduction. With the unsubstituted 2-benzenesulfonylcyclopentanone1a, efficient asymmetric reduction to form (1S,2R)-cis-2-benzenesulfonylcyclopentanol2a is observed under the same conditions. Excellent enantioselectivities (up to > 95% ee) are obtained.     

Enhanced production of fructose palmitate by lipase-catalyzed esterification in ionic liquids

For the enhancement of enzyme activity, application of ultrasound irradiation on lipase-catalyzed esterification of fructose with palmitic acid in ionic liquids (ILs) mixture containing supersaturated fructose solution was investigated. In the mixture of [Bmim][TfO] and [Omim][Tf₂N] (1:1, v/v), 1.44 times higher enzyme activity (29.2 μmoL/min/g) was achieved under ultrasound irradiation. Besides, ultrasound irradiation enhanced enzyme stability in viscous ILs mixture. After 5 times reuse of Novozym 435 and ILs mixture, 84.4% of initial enzyme activity was remained under ultrasound irradiation, while the residual activity using magnetic stirring only method was 76.2%. These results show that enzymatic reaction in viscous ILs mixture under ultrasound irradiation is an effective method for enzyme activity, as well as, enzyme stability resulting in economic competitiveness of green process.     

Efficient kinetic resolution of (R,S)-1-trimethylsilylethanol via lipase-mediated enantioselective acylation in ionic liquids

Efficient enantioselective acylation of (R,S)-1-trimethylsilylethanol {(R,S)-1-TMSE} with vinyl acetate catalyzed by immobilized lipase from Candida antarctica B (i.e., Novozym 435) was successfully conducted in ionic liquids (ILs). A remarkable enhancement in the initial rate and the enantioselectivity of the acylation was observed by using ILs as the reaction media when compared to the organic solvents tested. Also, the activity, enantioselectivity, and thermostability of Novozym 435 increased with increasing hydrophobicity of ILs. Of the six ILs examined, the IL C4MIm.PF6 gave the fastest initial rate and the highest enantioselectivity, and was consequently chosen as the favorable medium for the reaction. The optimal molar ratio of vinyl acetate to (R,S)-1-TMSE, water activity, and reaction temperature range were 4:1, 0.75, and 40 -50 degrees C, respectively, under which the initial rate and the enantioselectivity (E value) were 27.6 mM/h and 149, respectively. After a reaction time of 6 h, the ee of the remaining (S)-1-TMSE reached 97.1% at the substrate conversion of 50.7%. Additionally, Novozym 435 was effectively recycled and reused in C4MIm.PF6 for five consecutive runs without substantial lose in activity and enantioselectivity. The preparative scale kinetic resolution of (R,S)-1-TMSE in C4MIm.PF6 is shown to be very promising and useful for the industrial production of enantiopure (S)-1-TMSE.     

Influence of alcohol concentration on lipase-catalyzed enantioselective esterification of racemic naproxen in isooctane: under controlled water activity*

According to a previous study, alcohol concentration influences the enantiomeric ratio and initial rate of Candida cylindracea lipase-catalyzed enantioselective esterification of racemic 2-(6-methoxy-2-naphthyl) propionic acid in microaqueous isooctane in a similar manner. Such an influence might be attributed to the different water partitioning coefficients. In this work, we performed enzymatic resolutions in controlled water activity atmospheres, thereby separating the influence of alcohol concentrations from the effect of water partitioning. Despite this constant water activity condition, a similar dependence of enantiospecificity and initial rate on the concentration of acyl acceptor (n-butanol) was also found. This finding suggests that the alcohol concentration influences enzyme performance, but not because it strips water from the enzyme. The unexpected observations imply that an undetermined factor must be considered when the enzymatic resolution is performed in nonconventional media.     

Efficient acetic acid production by repeated fed-batch fermentation using two fermentors

Summary In acetic acid fermentation, the number of viable cells decrease as the acetic acid concentration increases to more than about 40 g/l, which means that the productivity attainable by conventional fed-batch and repeated fed-batch operations using one fermentor is limited. In this paper, based on a fed-batch experiment using Acetobacter aceti 2096, a mathematical model was developed. The optimization carried out showed the superiority of repeated fed-batch operation using two fermentors. The performance evaluation was made with respect to productivity and product concentration. It was shown to be attractive in practice to use multiple fermentors, in particular for high product concentrations. Experiments were then conducted to ascertain the simulation results. Offprint requests to: T. Kobayashi     

1-Monoglyceride production from lipase-catalyzed esterification of glycerol and fatty acid in reverse micelles

Glycerol-fatty acid esterification has been conducted with lipase from R. delemar in water/AOT/isooctane reverse micellar media, with the major product being 1-monoglyceride, a useful food-emulsifier. 1,3-diglyceride was also synthesized, but to a much lesser extent. For a given set of initial conditions, the reaction productivity, measured in terms of the initial product formation rate, V(0), and the final or equilibrium concentration of product, is optimal for a particular concentration of each surfactant, fatty acid, glycerol, and water. Many of these optimal values correlate well with a "critical" region on the phase diagram. Also, results indicate lipase-catalyzed esterification stops due to the achievement of kinetic equilibrium expect for a few cases where enzyme deactivation is severe. Dynamic light scattering was employed to examine the influence of water, glycerol, and fatty acid on micellar and interfacial structure. Results from this technique indicate enzyme kinetic are linked to interfacial phenomena and the presence of substrates at the interfacial region.     

Purification of conjugated linoleic acid isomers through a process including lipase-catalyzed selective esterification

A mixture of conjugated linoleic acids (CLAs) was prepared by alkali conjugation of high purity linoleic acid. The preparation contained 45.1 wt% cis-9, trans-11 (c9,t11)-CLA, 46.8 wt% trans-10, cis-12 (t10,c12)-CLA, and 5.3 wt% other CLAs. A process comprising Candida rugosa lipase-catalyzed selective esterification with lauryl alcohol, molecular distillation, and urea adduct fractionation under strict conditions in ethanol was very effective for purification of c9,t11- and t10,c12-CLAs. In particular, the urea adduct fractionation efficiently eliminated CLAs except c9,t11- and t10,c12-isomers. Purification of c9,t11- and t10,c12-CLAs from 1.0 kg of the CLA mixture increased the c9,t11-CLA purity to 93.1% with 34% recovery of the initial content, and increased the t10,c12-CLA purity to 95.3% with 31% recovery.     

Removal of water produced from lipase-catalyzed esterification in organic solvent by pervaporation

Esterification of oleic acid with n-butanol in the presence of Lipozyme(R) was carried out at 25 degrees C in isooctane with various initial water activities. Initial reaction rate as well as equilibrium conversion decreased at high initial water activity. Therefore, removal of water present in the reaction mixtures was essential. A pervaporation process was applied to the lipase-catalyzed synthesis of n-butyloleate to remove water. Pervaporation selectively separated water from the reaction mixture using a nonporous polymeric membrane, cellulose acetate. Therefore, pervaporation is potentially applicable to remove the water produced from various enzymatic processes, such as synthesis of various esters, peptides, and glycosides in a solvent system as well as in a solvent-free system. (c) 1995 John Wiley & Sons, Inc.     

Resolution of 2-nitroalcohols by Burkholderia cepacia lipase-catalyzed enantioselective acylation

Racemic 2-nitro-1-phenylethanol was resolved by via enantioselective transesterification catalyzed by Burkholderia cepacia lipase. The reaction afforded excellent E values (E > 200) and enantioselectivity (up to >99% enantiomeric excesses [ee]) of both remaining substrates and acetylated product. Moreover, the lipase displayed high enantioselectivity in the resolution of additional 2-nitroalcohols (E up to >200). This method provides an efficient alternative for obtaining enantiopure 2-nitroalcohols.     

Kinetic resolution of racemic alpha-methyl-beta-propiothiolactone by lipase-catalyzed hydrolysis

Kinetic resolution of racemic alpha-methyl-beta-propiothiolactone (rac-MPTL) using lipases in organic solvent was studied. The lipase from Pseudomonas cepacia (PCL) showed the highest (S)-enantioselectivity (E > 100), and cyclohexane containing 1% (v/v) buffer was identified as the best reaction medium for maintaining high enantioselectivity as well as high reaction rate. While the substrate inhibition was not observed up to 300 mM rac-MPTL, severe product inhibition was observed even at 50 mM racemic 3-mercapto-alpha-methyl propionic acid (rac-MMPA), which made the use of high substrate concentration difficult. To overcome the product inhibition, the products, (R)-MMPA, were neutralized by addition of a dilute basic solution. Although the resolution reaction proceeded further by the base titration, the enantioselectivity of the reaction decreased as a result of nonenantioselective hydrolysis of rac-MPTL in the basic solution. Under these conditions, 200 mM rac-MPTL was successfully resolved to above 95% ee(S) with 53% conversion.