Enhanced cytotoxicity of a polymer–drug conjugate with triple payload of paclitaxel

The development of targeting approaches to selectively release chemotherapeutic drugs into malignant tissue is a major challenge in anticancer therapy. We have synthesized an N-(2-hydroxypropyl)-methacrylamide (HPMA) copolymer–drug conjugate with an AB₃ self-immolative dendritic linker. HPMA copolymers are known to accumulate selectively in tumors. The water-soluble polymer–drug conjugate was designed to release a triple payload of the hydrophobic drug paclitaxel as a result of cleavage by the endogenous enzyme cathepsin B. The polymer–drug conjugate exhibited enhanced cytotoxicity on murine prostate adenocarcinoma (TRAMP C2) cells in comparison to a classic monomeric drug–polymer conjugate.     

Poly(ethylene glycol) multiblock copolymer as a carrier of anti-cancer drug doxorubicin

The synthesis of a novel water-soluble polymer drug carrier system based on biodegradable poly(ethylene glycol) block copolymer is described in this paper. The copolymer consisting of PEG blocks of molecular weight 2000 linked by means of an oligopeptide with amino end groups was prepared by interfacial polycondensation of the diamine and PEG bis(succinimidyl carbonate). The structure of the oligopeptide diamine consisting of glutamic acid and lysine residues was designed as a substrate for cathepsin B, a lysosomal enzyme, which was assumed to be one of the enzymes responsible for the degradation of the polymer carrier in vivo. Each of the oligopeptide blocks incorporated in the carrier contained three carboxylic groups of which some were used for attachment of an anti-cancer drug, doxorubicin (Dox), via a tetrapeptide spacer Gly-Phe-Leu-Gly. This tetrapeptide spacer is susceptible to enzymatic hydrolysis. In vitro release of Dox and the degradation of the polymer chain by cathepsin B as well as preliminary evaluation of in vivo anti-cancer activity of the conjugate are also demonstrated.     

Evaluation of protein-N-(2-hydroxypropyl)methacrylamide copolymer conjugates as targetable drug carriers. 1. Binding, pinocytic uptake and intracellular distribution of transferrin and anti-transferrin receptor antibody conjugates

The transferrin receptor of human skin fibroblasts was studied as an in vitro model target antigen receptor for interaction with protein-polymer conjugates having potential for targeted drug delivery. Pinocytic uptake of 125I-labelled N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer conjugated to monoclonal antibody B3/25 (specific for the transferrin receptor) or transferrin was up to 9-fold greater than uptake of the parent HPMA copolymer. The ability of these conjugates to bind specifically was confirmed by Scatchard analysis. Pinocytic internalisation was dependent on the molecular mass of the conjugate. Intracellular routing following internalisation was evaluated using density-gradient centrifugation. Unmodified HPMA copolymer was transferred via the endosomal compartment into secondary lysosomes, where, being resistant to degradation, it accumulated. Although the majority of endocytosed transferrin is recycled via the endosome, it was shown that any transferrin reaching the lysosomes was rapidly degraded and low-molecular-weight degradation products were released. Monoclonal antibody B3/25 showed a subcellular distribution consistent with prolongation on the cell surface, followed by internalisation and subcellular trafficking, via endosomes, into the lysosomal compartment, with subsequent degradation. Conjugation of protein to HPMA copolymer increased lysosomal accumulation of polymer up to 9-fold, with no detectable degradation of conjugate. The data presented here have implications regarding clinical potential of protein-HPMA copolymer conjugates designed for lysosomotropic drug delivery.     

Synthesis of well-defined graft copolymers by combination of enzymatic polycondensation and "click" chemistry

Aliphatic polyesters having pendant azide groups were prepared by enzymatic polycondensation in the presence of lipase from Candida antarctica type B (CAL-B). The grafting reaction to the N(3)-functional polyester was carried out quantitatively at room temperature using copper-catalyzed azide-alkyne cycloaddition (CuAAC, "click" reaction) with monoalkyne-functional poly(ethylene oxide) (alkyne-PEO, M(n) = 750 g/mol). Furthermore, both enzymatic polycondensation and "click" reaction were carried out successfully in sequential one-pot reaction. The graft copolymer was surface-active and self-assembled in water. The graft copolymer had a critical aggregation concentration (cac) of 3 × 10(-2) μM in water determined by surface tension measurements. Above cac, the graft copolymer formed single chains and aggregates having a hydrodynamic radius of ～75 nm. Furthermore, the surface activity of the polymers at the air-water interface was studied by Langmuir trough measurements. The Langmuir isotherm of the graft polymer showed a pseudoplateau resulting from desorption of PEO chains into the subphase upon compression.     

Synthesis and properties of carrageenan grafted copolymer with poly(vinyl alcohol)

The aim of this work was to prepare a carrageenan-g-poly(vinyl alcohol) (CG-g-PVA) polymer using potassium persulphate as an initiator. The effect of different ratios of the polymer blends on the parameters of the grafted polymer was investigated. The grafting ratio decreased with an increase of the CG content in the graft copolymer. The resulting CG-g-PVA was characterized by ATR-FTIR, tensile strength, elongation at break, swelling ratio, contact angle and biodegradation in soil. From the ATR-FTIR the 3,6-anhydride-galactose of the CG showed a peak at 927 cm⁻¹ that was absent in the CG-g-PVA and the ether linkage of PVA-g-CG between the hydroxyl group of PVA and the 3,6-anhydride-galactose of CG showed a peak at 1089 cm⁻¹ in the graft copolymer. The tensile strength and elongation at break decreased with an increase of the CG due to its phase separation. The highest tensile strength was observed at 2:8 CG/PVA. In addition, the swelling ratio decreased and the contact angle increased as a function of the increase of the CG in the grafted copolymer. The best ratio of CG-g-PVA was 2:8 CG/PVA. This graft copolymer was easily biodegraded in natural soil.     

Xanthan-g-poly(acrylamide): Microwave-assisted synthesis,characterization and in vitro release behavior

Xanthan-g-poly(acrylamide) was synthesized employing microwave-assisted and ceric-induced graft copolymerization, and was characterized by FT-IR, DSC, XRD and SEM studies. Matrix tablets of diclofenac sodium were formulated using graft copolymer as the matrix by direct compression technique. Release behavior of the graft copolymer was evaluated using USP type-II dissolution apparatus in 900 ml of phosphate buffer (pH 6.8), maintained at 37 °C and at 50 rpm. Microwave-assisted grafting provided graft copolymer with higher % grafting in a shorter time in comparison to the ceric-induced grafting. The % grafting was found to increase with the increase in the power of microwave and/or time of exposure. The matrix tablets were found to release the drug by zero-order kinetics, and the faster release of drug was observed from the graft copolymer matrix as compared to the xanthan gum matrix. It was observed that grafting reduces the swelling, but increases the erosion of xanthan gum.     

In vitro characterization of a novel polymeric-based pH-sensitive liposome system

This study demonstrates rapid and pH-sensitive release of a highly water-soluble fluorescent aqueous content marker, pyranine, from egg phosphatidylcholine liposomes following incorporation of N-isopropylacrylamide (NIPA) copolymers in liposomal membranes. The pH-sensitivity of this system correlates with the precipitation of the copolymers at acidic pH. In vitro release can be significantly improved by increasing the percentage of anchor in the copolymer and thus favoring its binding to the liposomal bilayer. In the case of liposomes containing a poly(ethylene glycol)-phospholipid conjugate, the insertion of the pH-sensitive copolymer in the liposomal membrane appears to be sterically inhibited. Dye release from these formulations at acidic pH can still be achieved by varying the anchor molar ratio and/or molecular mass of the polymers or by including the latter during the liposome preparation procedure. Removal of unbound polymer results in decreased leakage only when the copolymer is inserted by incubation with preformed liposomes, but can be overcome by preparing liposomes in the presence of polymer. Aqueous content and lipid mixing assays suggest contents release can occur without membrane fusion. The results of this study indicate that the addition of pH-sensitive copolymers of NIPA represents promising strategy for improving liposomal drug delivery.     

Star structure of antibody-targeted HPMA copolymer-bound doxorubicin: a novel type of polymeric conjugate for targeted drug delivery with potent antitumor effect

The aim of this study was to compare the properties and antitumor potential of a novel type of antibody-targeted N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer-bound doxorubicin conjugates with star structure with those of previously described classic antibody-targeted or lectin-targeted HPMA copolymer-bound doxorubicin conjugates. Classic antibody-targeted conjugates were prepared by aminolytic reaction of the multivalent HPMA copolymer containing side-chains ending in 4-nitrophenyl ester (ONp) reactive groups with primary NH(2) groups of the antibodies. The star structure of antibody-targeted conjugates was prepared using semitelechelic HPMA copolymer chains containing only one reactive N-hydroxysuccinimide group at the end of the backbone chain. In both types of conjugates, B1 monoclonal antibody (mAb) was used as a targeting moiety. B1 mAb recognizes the idiotype of surface IgM on BCL1 cells. The star structure of the targeted conjugate had a narrower molecular mass distribution than the classic structure. The peak in the star structure was around 300-350 kDa, while the classic structure conjugate had a peak around 1300 kDa. Doxorubicin was bound to the HPMA copolymer via Gly-Phe(D,L)-Leu-Gly spacer to ensure the controlled intracellular delivery. The release of doxorubicin from polymer conjugates incubated in the presence of cathepsin B was almost twice faster from the star structure of targeted conjugate than from the classic one. The star structure of the targeted conjugate showed a lower binding activity to BCL1 cells in vitro, but the cytostatic activity measured by [(3)H]thymidine incorporation was three times higher than that seen with the classic conjugate. Cytostatic activity of nontargeted and anti-Thy 1.2 mAb (irrelevant mAb) modified HPMA copolymer-bound doxorubicin was more than hundred times lower as compared to the star structure of B1 mAb targeted conjugate. In vivo, both types of conjugates targeted with B1 mAb bound to BCL1 cells in the spleen with approximately the same intensity. The classic structure of the targeted conjugate bound to BCL1 cells in the blood with a slightly higher intensity than the star structure. Both types of targeted conjugates had a much stronger antitumor effect than nontargeted HPMA copolymer-bound doxorubicin and free doxorubicin. The star structure of targeted conjugate had a remarkably higher antitumor effect than the classic structure: a single intravenous dose of 100 microg of doxorubicin given on day 11 completely cured five out of nine experimental animals whereas the classic structure of targeted conjugate given in the same schedule only prolonged the survival of experimental mice to 138% of control mice. These results show that the star structure of antibody-targeted HPMA copolymer-bound doxorubicin is a suitable conjugate for targeted drug delivery with better characterization, higher cytostatic activity in vitro, and stronger antitumor potential in vivo than classic conjugates.     

Synthesis and evaluation of a star amphiphilic block copolymer from poly(epsilon-caprolactone) and poly(ethylene glycol) as a potential drug delivery carrier

A star polymer composed of amphiphilic block copolymer arms has been synthesized and characterized. The core of the star polymer is polyamidoamine (PAMAM) dendrimer, the inner block in the arm is lipophilic poly(epsilon-caprolactone) (PCL), and the outer block in the arm is hydrophilic poly(ethylene glycol) (PEG). The star-PCL polymer was synthesized first by ring-opening polymerization of epsilon-caprolactone with a PAMAM-OH dendrimer as initiator. The PEG polymer was then attached to the PCL terminus by an ester-forming reaction. Characterization with SEC, (1)H NMR, FTIR, TGA, and DSC confirmed the star structure of the polymers. The micelle formation of the star copolymer (star-PCL-PEG) was studied by fluorescence spectroscopy. Hydrophobic dyes and drugs can be encapsulated in the micelles. A loading capacity of up to 22% (w/w) was achieved with etoposide, a hydrophobic anticancer drug. A cytotoxicity assay demonstrated that the star-PCL-PEG copolymer is nontoxic in cell culture. This type of block copolymer can be used as a drug delivery carrier.     

Water-soluble degradable hyperbranched polyesters: novel candidates for drug delivery?

A novel approach to hyperbranched polymers is presented in this work. Hyperbranched polyesters with a large amount of terminal hydroxyl groups are prepared by a one-pot synthesis from commercially available AB-type and CD(n)-type monomers (n >/= 2). In this paper, Michael addition of diethanolamine (CD(2)) or N-methyl-d-glucamine (CD(5)) to methyl acrylate (AB) generates dominantly AD(n)-type intermediates. Further self-condensation of intermediates at higher temperature and in the presence of catalyst gives hyperbranched polyesters. Because of the tertiary amino groups in the backbone and the hydroxyl groups in the linear and terminal units, the resulting hyperbranched polyester is highly soluble in water. Furthermore, the hyperbranched polymer is degradable because of its ester units. So, the water-soluble hyperbranched polyesters might be applied as a novel material for drug delivery.     

A chitosan-based flocculant prepared with gamma-irradiation-induced grafting

A natural polymer, chitosan, was modified to prepare an efficient flocculant using grafting method initiated by gamma ray in acid-water solution. A vinyl monomer, acrylamide, was used as the grafted monomer. The graft copolymer obtained was characterized using Fourier transform infrared spectroscopy, X-ray diffraction and thermogravimetric analysis. Effects of acetic acid concentration, total irradiation dose, dose rate and monomer concentration on the grafting percentage were investigated. Flocculation experiment results demonstrated that the graft copolymer produced was significantly superior to chitosan and polyacrylamide (PAM).     

Polymersomes: a new multi-functional tool for cancer diagnosis and therapy

Nanoparticles are being developed as delivery vehicles for therapeutic pharmaceuticals and contrast imaging agents. Polymersomes (mesoscopic polymer vesicles) possess a number of attractive biomaterial properties that make them ideal for these applications. Synthetic control over block copolymer chemistry enables tunable design of polymersome material properties. The polymersome architecture, with its large hydrophilic reservoir and its thick hydrophobic lamellar membrane, provides significant storage capacity for both water soluble and insoluble substances (such as drugs and imaging probes). Further, the brush-like architecture of the polymersome outer shell can potentially increase biocompatibility and blood circulation times. A further recent advance is the development of multi-functional polymersomes that carry pharmaceuticals and imaging agents simultaneously. The ability to conjugate biologically active ligands to the brush surface provides a further means for targeted therapy and imaging. Hence, polymersomes hold enormous potential as nanostructured biomaterials for future in vivo drug delivery and diagnostic imaging applications.     

Hydrophobically modified hydroxyethyl starch: synthesis, characterization, and aqueous self-assembly into nano-sized polymeric micelles and vesicles

Hydroxyethyl starch (HES) is a water soluble semisynthetic polysaccharide that is used as a plasma volume expander and cryoprotectant. In order to produce a fully biodegradable amphiphilic polymer, HES was esterified with lauric, palmitic, and stearic acids under mild reaction conditions using dicyclohexyl carbodiimide (DCC) and dimethylaminopyridine (DMAP). The molar substitution of the acyl chains (MSfatty acid) was determined with 1H NMR spectroscopy, while the conformational state of the hydrocarbon chains in the graft copolymer was determined using Raman spectroscopy. Furthermore, the aqueous self-assembly of the modified polymer was studied using dynamic light scattering (DLS) and transmission electron microscopy (TEM). Results show the formation of 20 to 30 nm micelles, and 250 to 350 nm polymeric vesicles. Electron spin resonance (ESR) spectroscopy was used to study the microenvironment of a hydrophobic spin probe loaded inside the formed nanodispersion. It was possible to identify the location of the probe and its distribution between the micelles and vesicles. Finally, the hydrophobically modified HES might find use as a potential drug carrier, warranting the future investigation of its ability to encapsulate and deliver drug candidates.     

Immobilization of cytochrome c on beaded poly(N-acrylylpyrrolidine)

In order to examine a procedure whereby the points of covalent attachment between the components of a protein-polymer conjugate could be determined, horse heart cytochrome c was attached to a beaded copolymer of N-acrylylpyrrolidine, N,N′-bis(acrylyl)-1,2-diaminoethane and N-acrylyl-1,6-aminohexane through a cleavable azo linkage. Studies of protein removed from this conjugate showed that attachment of the polymer to cytochrome occurred predominantly through single lysine residues on the protein surface; lysine-25 was tentatively identified as the residue most extensively utilized in this way. Protein was also linked to the polymer by two lysine residues and a significant amount of protein was irreversibly attached to the polymer under the reaction conditions used.     

Antibacterial surfaces based on polymer brushes: investigation on the influence of brush properties on antimicrobial peptide immobilization and antimicrobial activity

Primary amine containing copolymer, poly(N,N-dimethylacrylamide-co-N-(3-aminopropyl)methacrylamide hydrochloride) (poly(DMA-co-APMA)), brushes were synthesized on Ti surface by surface-initiated atom transfer radical polymerization (SI-ATRP) in aqueous conditions. A series of poly(DMA-co-APMA) copolymer brushes on titanium (Ti) surface with different molecular weights, thicknesses, compositions, and graft densities were synthesized by changing the SI-ATRP reaction conditions. Cysteine-functionalized cationic antimicrobial peptide Tet213 (KRWWKWWRRC) was conjugated to the copolymers brushes using a maleimide-thiol addition reaction after initial modification of the grafted chains using 3-maleimidopropionic acid N-hydroxysuccinimide ester. The modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS), water contact angle measurements, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM), and ellipsometry analysis. The conjugation of the Tet213 onto brushes strongly depended on graft density of the brushes at different copolymer brush compositions. The peptide density (peptides/nm(2)) on the surface varied with the initial composition of the copolymer brushes. Higher graft density of the brushes generated high peptide density (pepetide/nm(2)) and lower number of peptides/polymer chain and vice versa. The peptide density and graft density of the chains on surface greatly influenced the antimicrobial activity of peptide grafted polymer brushes against Pseudomonas aeruginosa.     

Pinocytic capture and exocytosis of rat immunoglobulin IgG-N-(2-hydroxy-propyl)methacrylamide copolymer conjugates by rat visceral yolk sacs culturedin vitro

Rat immunoglobulin (IgG) was covalently bound to N-(2-hydroxypropyl)methacrylamide (HPMA) copolymers via glycylglycyl spacer. The resultant conjugate, free IgG and HPMA copolymer (containing a low percentage of tyrosinamide to facilitate radiolabelling) were radioiodinated, and their rates of pinocytic uptake, intracellular degradation and exocytic release by rat visceral yolk sacs culturedin vitro were determined. Free IgG was pinocytosed rapidly by the yolk sac and some IgG was subject to intracellular proteolysis. In comparison the IgG-HPMA copolymer conjugate was captured more slowly, but faster than unmodified HPMA. IgG was also exocytosed rapidly by the yolk sac following pinocytic capture and similarly IgG-HPMA copolymer had a much higher rate of release than unmodified H PMA. Measurement of tissue accumulation of¹²⁵I-labelled IgG-H PMA copolymer in the presence of increasing concentrations of non-radiolabelled IgG showed competition for membrane binding sites between the free, and polymer-bound immunoglobulin. These experiments indicate that immunoglobulins can be covalently bound to a soluble polymer developed as a drug-carrier in such a way that they can still interact with specific membrane receptors and they are subsequently subjected to specific cellular transport mechanisms.     

Drug release from and hydrolytic degradation of a poly(ethylene glycol) grafted poly(3-hydroxyoctanoate)

Monoacrylate-poly(ethylene glycol)-grafted poly(3-hydroxyoctanoate) (PEGMA-g-PHO) copolymers were synthesized to develop a swelling-controlled release delivery system for ibuprofen as a model drug. The in vitro hydrolytic degradation of and the drug release from a film made of the PEGMA-g-PHO copolymer were carried out in a phosphate buffer saline (pH 7.4) medium. The hydrolytic degradation of the copolymer was strongly dependent on the degree of grafting (DG) of the PEGMA group. The degradation rate of the copolymer films in vitro increased with increasing DG of the PEGMA group on the PHO chain. The copolymer films showed a controlled delivery of ibuprofen to the medium in periods of time that depend on the composition, hydrophilic/hydrophobic characteristics, initial drug loading amount and film thickness of the graft copolymer support. The drug release rate from the grafted copolymer films was faster than the rate of weight loss of the films themselves. In particular, a combination of the low DG of the PEGMA group in the PHO chains with the low ibuprofen solubility in water led to long-term constant release from these matrices in vitro.     

Gel formation driven by tunable hydrophobic domain: design of acrylamide macromonomer with oligo hydrophobic segment

Nowadays, biomaterials with amphiphilic properties are undergoing remarkable development. Here, we present one such development, in which we prepared amphiphilic graft copolymers, with a main chain composed of hydroxyethyl acrylamide (HEAA), to introduce hydrophilicity, and a side chain composed of poly(trimethylene carbonate) (PTMC) to introduce tunable hydrophobicity. These macromonomers were created with a novel molecular design, which introduced a ring-opening polymerization by the hydroxyl end group of HEAA in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene, and were analyzed by (1)H NMR and gel permeation chromatography. The amphiphilic graft copolymers were shown to form a hydrogel, the swelling ratio of which was greatly influenced by the number of trimethylene carbonate units. These copolymers also exhibited the Tyndall phenomenon in aqueous solution; they aggregated spontaneously due to hydrogen bonding and hydrophobic interactions, and a sodium 8-anilino-1-naphthalenesulfonate (ANS) fluorescence probe was introduced into the hydrophobic domain. The solution property of ANS in the polymer solution was analyzed by fluorescence measurement and (1)H NMR. The maximum fluorescence wavelength of ANS shifted to shorter wavelengths as the degree of polymerization of the hydrophobic PTMC, the composition of the macromonomer, and the concentration of the copolymer increased. The resulting copolymer formed a polymer micelle structure due to the tunable hydrophobic domain formation in selected solvents. Therefore, these amphiphilic graft copolymers containing a PTMC segment are excellent candidates for use as hydrophobic drug delivery carriers.     

Dendrimer versus linear conjugate: Influence of polymeric architecture on the delivery and anticancer effect of paclitaxel

The relative difference in polymeric architectures of dendrimer and linear bis(poly(ethylene glycol)) (PEG) polymer in conjugation with paclitaxel has been described. Paclitaxel, a poorly soluble anticancer drug, was covalently conjugated with PAMAM G4 hydroxyl-terminated dendrimer and bis(PEG) polymer for the potential enhancement of drug solubility and cytotoxicity. Both conjugates were characterized by 1NMR, HPLC, and MALDI/TOF. In addition, molecular conformations of dendrimer, bis(PEG), paclitaxel, and its polymeric conjugates were studied by molecular modeling. Hydrolysis of the ester bond in the conjugate was analyzed by HPLC using esterase hydrolyzing enzyme. In vitro cytotoxicity of dendrimer, bis(PEG), paclitaxel, and polymeric conjugates containing paclitaxel was evaluated using A2780 human ovarian carcinoma cells. Cytotoxicity increased by 10-fold with PAMAM dendrimer-succinic acid-paclitaxel conjugate when compared with free nonconjugated drug. Data obtained indicate that the nanosized dendritic polymer conjugates can be used with good success as anticancer drug carriers.     

Conjugation to increase treatment volume during local therapy: a case study with PEGylated camptothecin

Controlled release of chemotherapy drugs from polymer implants placed directly at the tumor site is a proven method for treatment of cancers of the brain. Although this method provides high doses of drug at the tumor site, the drug does not penetrate far enough into the brain for optimum treatment in most cases. Rapid drug elimination leads to more than a 10-fold drop in concentration within 2 mm of the implant. Conjugation to water-soluble polymers, such as poly(ethylene glycol) (PEG) or dextran, has the potential to increase drug distribution in the brain. We have recently PEGylated the chemotherapy drug camptothecin and found a large increase in the extent of distribution of camptothecin in the rat brain, but most of the drug in tissue was in the less-active conjugated form. Stability of the conjugation bond, activity of the drug-polymer conjugate, solubility of the conjugate relative to the drug, and molecular weight of the polymer must all be considered in the design of a conjugate to maximize drug distribution. Therefore, to optimize the PEGylated system, we have developed a pharmacokinetic model to determine the relative importance of parameters involved in the distribution of drug-polymer conjugates after release from a polymer implant. Our modeling shows that PEGylation has the potential to increase treatment distances to more than a centimeter, which may be sufficient to prevent the recurrence of human brain tumors.