Enzymatic production of biodiesel from cotton seed oil using t-butanol as a solvent

The enzymatic production of biodiesel by methanolysis of cottonseed oil was studied using immobilized Candida antarctica lipase as catalyst in t-butanol solvent. Methyl ester production and triacylglycerol disappearance were followed by HPLC chromatography. It was found, using a batch system, that enzyme inhibition caused by undissolved methanol was eliminated by adding t-butanol to the reaction medium, which also gave a noticeable increase of reaction rate and ester yield. The effect of t-butanol, methanol concentration and temperature on this system was determined. A methanolysis yield of 97% was observed after 24h at 50 degrees C with a reaction mixture containing 32.5% t-butanol, 13.5% methanol, 54% oil and 0.017 g enzyme (g oil)(-1). With the same mixture, a 95% ester yield was obtained using a one step fixed bed continuous reactor with a flow rate of 9.6 mlh(-1) (g enzyme)(-1). Experiments with the continuous reactor over 500 h did not show any appreciable decrease in ester yields.     

Single-cell protein production from ram horn hydrolysate by bacteria

The alcoholysis (transesterification) of the refined cotton seed oil of Turkish origin with primary and secondary alcohols was investigated in the presence of an immobilized enzyme from Candida antarctica, commercially called Novozym 435 in a solvent-free medium. The optimum conditions of the methanolysis were as follows: 30% enzyme based on oil weight; oil/alcohol molar ratio 1:4; temperature: 50 degrees C and reaction time: 7 h. Maximum methyl esters (ME) yield was 91.5%. At the same conditions cotton seed oil was converted with short-chain primary and secondary alcohols to its corresponding esters with conversions between 72% and 94%. Our results indicated that alcoholysis products of cotton seed oil could be used as valuable intermediates in oleochemistry.     

Ectoine improves yield of biodiesel catalyzed by immobilized lipase

To improve the production of biodiesel by enzymatic conversion of triglycerides in cottonseed oil, compatible solutes were added to the solvent-free methanolysis system to prevent competitive methanol inhibition on the immobilized lipase (Novozym^® 435). The results indicated that the addition of ectoine increased biodiesel synthesis using a three-step methanol addition process. The concentration of methyl ester (ME) reached a maximum of 95.0% in the presence of 1.1 mmol/l ectoine, an increase of 20.9% compared to that in the absence of ectoine. On the other hand, excess ectoine decreased the ME concentration. Ectoine was also shown to enhance reuse of the immobilized lipase, significantly improving ME concentrations in each recycling test. Total concentrations of ME with added ectoine were about 1.5 times that without ectoine during five recycling tests (molar ratio of cottonseed oil to methanol, 1:4). Enzymatic reaction kinetics showed, in the concentration ranges of 0.8–1.14 mol/l and 0.03–8 mol/l for triglyceride and methanol, respectively, that ectoine had no effect on the initial reaction rates when methanol concentrations were below 0.5 mol/l. When methanol concentration exceeded 0.5 mol/l, the addition of 0.8 mmol/l ectoine increased the initial reaction rates, and the lipase exhibited a lower affinity for methanol and higher affinity for triglyceride (kinetic parameters of K_mA increase, K_mTG decrease). However, the initial reaction rates decreased significantly when 8 mmol/l ectoine was added, with the lipase having higher affinity for methanol and lower affinity for triglyceride (K_mA decrease, K_mTG increase). The supplementation of ectoine provided a new method for the purpose of improving yield of biodiesel catalyzed by enzyme.     

复合脂肪酶协同催化制备生物柴油的研究

【目的】探讨复合酶协同催化体系在含水量较高的体系中催化油脂制备生物柴油的工艺条件。【方法】通过基因工程手段在毕赤酵母中分别高效分泌表达南极假丝酵母脂肪酶(CALB)和米根霉脂肪酶(ROL),构建CALB和ROL复合酶协同催化体系制备生物柴油,利用单因素实验优化工艺条件,以甲酯化得率作为复合酶协同催化体系效能的评价标准。【结果】优化工艺条件为:CALB?ROL最佳复合酶配比为7?3,每克大豆油中加入16 U的复合脂肪酶,甲醇与大豆油摩尔比为4?1,并按0 h时2?1醇油摩尔比,12 h和24 h时以1?1醇油摩尔比分批加入甲醇,含水量为30%-60%之间,40°C反应29-34 h,甲酯得率达到93%。【结论】该复合酶协同催化体系对环境友好,与常规酶法制备生物柴油工艺相比对酶的使用量和催化时间减少幅度都在50%以上,本复合酶协同催化体系能有效降低生物柴油制备成本,具有较好的工业化应用前景。     

Lipase-catalyzed transesterification of rapeseed oils for biodiesel production with a novel organic solvent as the reaction medium

tert-Butanol, as a novel reaction medium, has been adopted for lipase-catalyzed transesterification of rapeseed oil for biodiesel production, with which both the negative effects caused by excessive methanol and by-product glycerol could be eliminated. Combined use of Lipozyme TL IM and Novozym 435 was proposed further to catalyze the methanolysis and the highest biodiesel yield of 95% could be achieved under the optimum conditions (tert-butanol/oil volume ratio 1:1; methanol/oil molar ratio 4:1; 3% Lipozyme TL IM and 1% Novozym 435 based on the oil weight; temperature 35 °C; 130 rpm, 12 h). There was no obvious loss in lipase activity even after being repeatedly used for 200 cycles with tert-butanol as the reaction medium. Furthermore, waste oil was also explored for biodiesel production and it has been found that lipase also showed good stability in this novel system.     

Ultrasonic irradiation with vibration for biodiesel production from soybean oil by Novozym 435

The production of biodiesel with soybean oil and methanol through transesterification by Novozym 435 (Candida antarctica lipase B immobilized on polyacrylic resin) were conducted under two different conditions—ultrasonic irradiation and vibration to compare their overall effects. Compared with vibration, ultrasonic irradiation significantly enhanced the activity of Novozym 435. The reaction rate was further increased under the condition of ultrasonic irradiation with vibration (UIV). Effects of reaction conditions, such as ultrasonic power, water content, organic solvents, ratio of solvent/oil, ratio of methanol/oil, enzyme dosage and temperature on the activity of Novozym 435 were investigated under UIV. Under the optimum conditions (50% of ultrasonic power, 50 rpm vibration, water content of 0.5%, tert-amyl alcohol/oil volume ratio of 1:1, methanol/oil molar ratio of 6:1, 6% Novozym 435 and 40 °C), 96% yield of fatty acid methyl ester (FAME) could be achieved in 4 h. Furthermore, repeated use of Novozym 435 after five cycles showed no obvious loss in enzyme activity, which suggested this enzyme was stable under the UIV condition. These results indicated that UIV was a fast and efficient method for biodiesel production.     

Production of biodiesel fuel from soybean oil catalyzed by fungus whole-cell biocatalysts in ionic liquids

The methanolysis of soybean oil to produce a fatty acid methyl ester (ME, i.e., biodiesel fuel) was catalyzed by lipase-producing filamentous fungi immobilized on biomass support particles (BSPs) as a whole-cell biocatalyst in the presence of ionic liquids. We used four types of whole-cell biocatalysts: wild-type Rhizopus oryzae producing triacylglycerol lipase (w-ROL), recombinant Aspergillus oryzae expressing Fusarium heterosporum lipase (r-FHL), Candida antarctica lipase B (r-CALB), and mono- and diacylglycerol lipase from A. oryzae (r-mdlB). w-ROL gave the high yield of fatty acid methyl ester (ME) in ionic liquid [Emim][BF₄] or [Bmim][BF₄] biphasic systems following a 24 h reaction. While lipases are known to be severely deactivated by an excess amount of methanol (e.g. 1.5 Mequiv. of methanol against oil) in a conventional system, methanolysis successfully proceeded even with a methanol/oil ratio of 4 in the ionic liquid biphasic system, where the ionic liquids would work as a reservoir of methanol to suppress the enzyme deactivation. When only w-ROL was used as a biocatalyst for methanolysis, unreacted mono-glyceride remained due to the 1,3-positional specificity of R. oryzae lipase. High ME conversion was attained by the combined use of two types of whole-cell biocatalysts, w-ROL and r-mdlB. In a stability test, the activity of w-ROL was reduced to one-third of its original value after incubation in [Bmim][BF₄] for 72 h. The stability of w-ROL in [Bmim][BF₄] was greatly enhanced by cross-linking the biocatalyst with glutaraldehyde. The present study demonstrated that ionic liquids are promising candidates for use as the second solvent in biodiesel fuel production by whole-cell biocatalysts.     

Transesterification of palm oil to methyl ester on activated carbon supported calcium oxide catalyst

In this study, methyl ester (ME) was produced by transesterification of palm oil (CPO) (cooking grade) using activated carbon supported calcium oxide as a solid base catalyst (CaO/AC). Response surface methodology (RSM) based on central composite design (CCD) was used to optimize the effect of reaction time, molar ratio of methanol to oil, reaction temperature and catalyst amount on the transesterification process. The optimum condition for CPO transesterification to methyl ester was obtained at 5.5 wt.% catalyst amount, 190 °C temperature, 15:1 methanol to oil molar ratio and 1 h 21 min reaction time. At the optimum condition, the ME content was 80.98%, which is well within the predicted value of the model. Catalyst regeneration studies indicate that the catalyst performance is sustained after two cycles.     

Highly efficient transformation of waste oil to biodiesel by immobilized lipase from Penicillium expansum

An inexpensive self-made immobilized lipase from Penicillium expansum was shown to be an efficient biocatalyst for biodiesel production from waste oil with high acid value in organic solvent. It was revealed that water from the esterification of free fatty acids and methanol prohibited a high methyl ester yield. Adsorbents could effectively control the concentration of water in the reaction system, resulting in an improved methyl ester yield. Silica gel was proved to be the optimal adsorbent, affording a ME yield of 92.8% after 7 h. Moreover, the enzyme preparation displayed a higher stability in waste oil than in corn oil, with 68.4% of the original enzymatic activity retained after being reused for 10 batches.     

Lipase catalyzed methanolysis to produce biodiesel: Optimization of the biodiesel production

A lipase from Candida sp., suitable for transesterification of fats and oils to produce fatty acid methyl ester (FAME), was immobilized on a cheap cotton membrane, in this paper. The conversion ratio of salad oil to biodiesel could reach up to 96% with the optimal reaction conditions. Continuous reaction in a fixed bed reactor was also investigated. A three-step transesterification with methanol (methanolysis) of oil was conducted by using a series of nine columns packed with immobilized Candida sp. 99–125 lipase. As substrate of the first reaction step, plant or waste oil was used together with 1/3 molar equivalent of methanol against total fatty acids in the oil. Mixtures of the first- and second-step eluates and 1/3 molar equivalent of methanol were used for the second- and third-reaction steps. A hydrocyclone was used in order to on-line separate the by-product glycerol after every 1/3 molar equivalent of methanol was added. Petroleum ether was used as solvent (3/2, v/v of oil) and the pump was operated with a flow rate of 15 L/h giving an annual throughput of 100 t. The final conversion ratio of the FAME from plant oil and waste oil under the optimal condition was 90% and 92%, respectively. The life of the immobilized lipase was more than 10 days. This new technique has many strongpoints such as low pollution, environmentally friendly, and low energy costs.     

Production of biodiesel from Jatropha curcas L. oil catalyzed by SO₄²⁻/ZrO₂ catalyst: effect of interaction between process variables

This study reports the conversion of Jatrophacurcas L. oil to biodiesel catalyzed by sulfated zirconia loaded on alumina catalyst using response surface methodology (RSM), specifically to study the effect of interaction between process variables on the yield of biodiesel. The transesterification process variables studied were reaction temperature, reaction duration, molar ratio of methanol to oil and catalyst loading. Results from this study revealed that individual as well as interaction between variables significantly affect the yield of biodiesel. With this information, it was found that 4h of reaction at 150°C, methanol to oil molar ratio of 9.88 mol/mol and 7.61 wt.% for catalyst loading gave an optimum biodiesel yield of 90.32 wt.%. The fuel properties of Jatropha biodiesel were characterized and it indeed met the specification for biodiesel according to ASTM D6751.     

Conversion of Soybean Oil to Biodiesel Fuel Using Lipozyme TL IM in a Solvent-free Medium

The conversion of soybean oil to biodiesel fuel was investigated in the presence of a lipase from Thermomyces lanuginosus (commercially called Lipozyme TL IM) in a solvent-free medium. The lipase was inactivated when more than 1.5 molar equivalent of methanol was added to the oil mixture. To fully convert the oil to its corresponding methyl esters, the reaction was performed successfully by a three-step addition of 1 molar equivalent of methanol and under the optimized conditions (40°C, 150 rpm, 10% enzyme quantity based on oil weight), the maximum methyl ester (ME) yield was 98% after 12 h reaction. By-product glycerol had a negative effect on enzymatic activity and iso-propanol was found to be effective for glycerol removal, in the presence of which lipase expressed relatively high activity and more than 94% of the ME yield was maintained after being used repeatedly for 15 batches.     

Novozym 435 for production of biodiesel from unrefined palm oil: Comparison of methanolysis methods

Biodiesel (BD) is commonly produced from refined vegetable oils by alkali-catalyzed methanolysis. Unrefined vegetable oils are economically attractive but not suitable for alkali catalysis because of their high content of free fatty acids (FFAs). Novozym 435 (immobilized Candida antarctica lipase B), which accepts both FFA and oil as substrates, was, therefore, employed to convert unrefined palm oil to BD. Three different methanolysis methods, namely, t-butanol mediated system (method-1), LiCl solution based controlled release system for methanol (method-2) and solvent-free system with three successive additions of methanol (method-3), were compared. The optimal methanol to oil molar ratios in the method-1, -2 and -3 are 6:1, 3:1 and 3:1, respectively. BD yield at an optimal methanol concentration reaches 91–92% after 10, 20 and 24 h in the method-1, -2 and -3, respectively. BD yield remains the same over five repeated cycles in the method-1, while it drops to 68 and 71% by the fifth cycle in the method-2 and -3, respectively. The results show that the method-1 is the most effective for production of BD from a low cost feedstock like unrefined palm oil.     

Optimization of whole cell-catalyzed methanolysis of soybean oil for biodiesel production using response surface methodology

Utilizing whole cell biocatalyst instead of free or immobilized enzyme is a potential way to reduce the cost of catalyst in lipase-catalyzed biodiesel production. Rhizopus oryzae (R. oryzae) IFO4697 whole cell immobilized within biomass support particles (BSPs) was used for the methanolysis of soybean oil for biodiesel production in this paper. tert-Butanol was demonstrated to be an ideal reaction medium, in which the negative effects caused by substrate methanol could be eliminated effectively. A central composite design was adopted to study the effect of tert-butanol quantity, methanol quantity, water content and dry biomass of the immobilized cell on biodiesel (methyl ester) yield. Each factor was studied in five levels. Using response surface methodology, a quadratic polynomial equation was obtained for methyl ester yield by multiple regression analysis. Biodiesel yield of 72% could be obtained under the optimal conditions and further verification experiments confirmed the validity of the predicted model.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Lipase-catalyzed methanolysis of palm oil in presence and absence of organic solvent for production of biodiesel

Enzymatic production of methyl esters (biodiesel) by methanolysis of palm oil in presence and absence of organic solvent was investigated using Candida antarctica lipase immobilized on acrylic resin as a biocatalyst. Although, at least molar equivalent of methanol (methanol-palm oil ratio 3:1) is required for the complete conversion of palm oil to methyl esters, lipase catalyzed methanolysis of palm oil in absence of organic solvent was poisoned by adding more than 1/3 molar equivalent of methanol. The use of polar organic solvents prevented the lipase to be poisoned in methanolysis with a molar equivalent of methanol, and tetrahydrofuran (THF) was found to be the most effective. The presence of water in methanolysis of palm oil both in presence and absence of THF inhibited the reaction rate but this inhibition was considerably low in THF containing system. The palm oil-lipase (w/w) ratio significantly influenced the activity of lipase and the optimal ratio in presence and absence of THF was 100 and 50, respectively.     

Conversion of Soybean Oil to Biodiesel Fuel Using Lipozyme TL IM in a Solvent-free Medium

The conversion of soybean oil to biodiesel fuel was investigated in the presence of a lipase from Thermomyces lanuginosus (commercially called Lipozyme TL IM) in a solvent-free medium. The lipase was inactivated when more than 1.5 molar equivalent of methanol was added to the oil mixture. To fully convert the oil to its corresponding methyl esters, the reaction was performed successfully by a three-step addition of 1 molar equivalent of methanol and under the optimized conditions (40°C, 150 rpm, 10% enzyme quantity based on oil weight), the maximum methyl ester (ME) yield was 98% after 12 h reaction. By-product glycerol had a negative effect on enzymatic activity and iso-propanol was found to be effective for glycerol removal, in the presence of which lipase expressed relatively high activity and more than 94% of the ME yield was maintained after being used repeatedly for 15 batches.     

Three-phase partitioning as a rapid and efficient method for purification of invertase from tomato

Three-phase partitioning (TPP), a technique used in protein purification, was used to purify invertase from tomato (Lycopersicon esculentum). The method consists of simultaneous addition of ammonium sulfate and t-butanol to the crude enzyme extract in order to obtain the three phases. Different parameters (ammonium sulfate saturation, crude extract to t-butanol ratio and pH) essential for the extraction and purification of invertase were optimized to get highest purity fold and yield. It was seen that, 50% (w/v) ammonium sulfate saturation with 1:1 (v/v) ratio of crude extract to t-butanol at pH 4.5 gave 8.6-fold purification with 190% activity recovery of invertase in a single step. Finally, the purified enzyme was also characterized and the general biochemical properties were determined. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of enzyme showed considerable purification and its molecular weight was nearly found to be as 20 kDa. This work shows that, TPP is a simple, quick and economical technique for purification of invertases.     

A novel enzymatic route for biodiesel production from renewable oils in a solvent-free medium

A new enzymatic route for biodiesel production from soybean oil was developed using methyl acetate as a novel acyl acceptor. Novozym 435 (immobilized Candida antarctica lipase) gave the highest methyl ester (ME) yield of 92%. The optimum conditions of the transesterification were 30% enzyme based on oil weight; a molar ratio of methyl acetate/oil of 12:1; temperature 40 °C and reaction time 10 h. Since no glycerol was produced in the process, this method is very convenient for recycling the catalyst and by-product triacetylglycerol showed no negative effect on the fuel property.     

Improved catalytic performance of GA cross-linking treated Rhizopus oryzae IFO 4697 whole cell for biodiesel production

Whole cell-mediated methanolysis of renewable oils for biodiesel production has drawn much attention in recent years since it can avoid the complex procedures of isolation, purification and immobilization required for the preparation of immobilized lipase. It has been demonstrated that Rhizopus oryzae IFO 4697 whole cell could catalyze the methanolysis of renewable oils for biodiesel production effectively and glutaraldehyde (GA) cross-linking treatment on whole cell catalyst could improve its stability in the repeated uses. The catalytic performance of cells with GA cross-linking treatment was studied systematically in this paper. The results showed that the treated cells expressed higher methanol tolerance, and high catalytic activity could be maintained with higher ratio of methanol to oil; the operational stability of whole cell catalyst and methanol utilization rate were also considered in optimization of methanol addition strategy. A novel methanol addition strategy was proposed, with which the reaction time could be shortened significantly and a biodiesel yield of 94.1% could be obtained within 24 h reaction; it was also found that with this methanol addition strategy, GA cross-linked whole cell expressed rather good operational stability; the reason for stability improvement was also investigated and should be attributed to less lipase leakage.