The phenomenon of super activity in dihydrofolate reductase entrapped inside reverse micelles in apolar solvents

Bovine liver dihydrofolate reductase has been solubilized in reverse micelles of cationic surfactant cetyltrimethylammonium bromide (CTAB) in isooctane-chloroform (1:1,V/V) mixture. Variation of waterpool (WO), pH and surfactant concentration showed that the enzyme activity was regulated by these parameters and was higher than the activity found in aqueous buffer (defined as superactivity); the maximum being at WO 13.3, pH 7.0 and CTAB concentration 75 mM. The Michaelis constants, Km for the substrate FAH2 and NADPH were found to be greater than those determined in water. Since reverse micelles have some features similar to those of biomembranes, display of super activity by dihydrofolate reductase indicates that enzymes in vivo may possess higher activity than actually observed in vitro studies in aqueous solutions.     

Reverse micelles as a versatile medium for the study of lactate dehydrogenase in vitro

Rabbit muscle lactate dehydrogenase has been solubilized in cationic reverse micelles of cetyltrimethyl ammonium bromide (CTAB) and isooctane-chloroform (1:1, V/V). The activity of the enzyme was notably affected by the change in water pool, pH, and concentration of the surfactant. Lactate dehydrogenase showed its full activity in this reverse micellar system in non-aqueous solvent under specific conditions at a Wo value of 30.55, pH 7.0, and 100 mM CTAB in comparison to the activity measured in aqueous system under optimum conditions. These results indicate that even the large and complex enzymes (M.W. hundred thousand and four subunits) can be solubilized in apolar solvents where they may retain their conformational integrity and oligomericity, i.e., optimum subunit-subunit interaction with maintenance of full activity.     

FTIR study of horseradish peroxidase in reverse micelles

Fourier transform infrared (FTIR) method was used to study the secondary structures of horseradish peroxidase (HRP) in aqueous solution and in reverse micelles for the first time. Results indicated that the structure of HRP in sodium bis(2-ethylhexy)sulfosuccinate (AOT) reverse micelles was close to that in aqueous solution. In cetyltrimethylammonium bromide (CTAB) and sodium dodecylfate (SDS) reverse micelles the position of some bands changed. Results indicated that the secondary structure had a close relationship with the surfactant species of the reverse micelles. Among the three types of reverse micelles, the system of AOT reverse micelles was probably the most beneficial reaction media to HRP.     

Enzymatic hydrolysis of microcrystalline cellulose in reverse micelles

The activities of cellulases from Trichoderma reesei entrapped in three types of reverse micelles have been investigated using microcrystalline cellulose as the substrate. The reverse micellar systems are formed by nonionic surfactant Triton X-100, anionic surfactant Aerosol OT (AOT), and cationic surfactant cetyltrimethyl ammonium bromide (CTAB) in organic solvent media, respectively. The influences of the molar ratio of water to surfactant omega0, one of characteristic parameters of reverse micelles, and other environmental conditions including pH and temperature, on the enzymatic activity have been studied in these reverse micellar systems. The results obtained indicate that these three reverse micelles are more effective than aqueous systems for microcrystalline cellulose hydrolysis, and cellulases show "superactivity" in these reverse micelles compared with that in aqueous systems under the same pH and temperature conditions. The enzymatic activity decreases with the increase of omega0 in both AOT and Triton X-100 reverse micellar systems, but reaches a maximum at omega0 of 16.7 for CTAB reverse micelles. Temperature and pH also influence the cellulose hydrolysis process. The structural changes of cellulases in AOT reverse micelles have been measured by intrinsic fluorescence method and a possible explanation for the activity changes of cellulases has been proposed.     

Affinity extraction of BSA with reversed micellar system composed of unbound Cibacron Blue

Affinity Cibacron Blue 3GA (CB) dye in aqueous phase was directly transferred to the reversed micelles due to electrostatic interaction between anionic CB and cationic cetyltrimethylammonium bromide (CTAB). The bovine serum albumin (BSA) transfer to the reverse micelles increases significantly in a wide range of pH by the addition of a small amount of CB ( approximately 1.0-7.0% of the total surfactant concentration) to the aqueous phase. For pH < pI, the selectivity can be significantly improved with the presence of affinity CB because no BSA was extracted in the absence of CB. For backward extraction of BSA from the micellar phase with stripping aqueous solution, the addition of 2-propanol to the aqueous phase can recover almost all BSA (98.5%) extracted into the reverse micelles.     

Deactivation and conformational changes of cutinase in reverse micelles

Deactivation data and fluorescence intensity changes were used to probe functional and structural stability of cutinase in reverse micelles. A fast deactivation of cutinase in anionic (AOT) reverse micelles occurs due to a reversible denaturation process. The deactivation and denaturation of cutinase is slower in small cationic (CTAB/1-hexanol) reverse micelles and does not occur when the size of the cationic reverse micellar water-pool is larger than cutinase. In both systems, activity loss and denaturation are coupled processes showing the same trend with time. Denaturation is probably caused by the interaction between the enzyme and the surfactant interface of the reversed micelle. When the size of the empty reversed micelle water-pool is smaller than cutinase (at W0 5, with W0 being the water:surfactant concentration ratio) a three-state model describes denaturation and deactivation with an intermediate conformational state existing on the path from native to denaturated cutinase. This intermediate was clearly detected by an increase in activity and shows only minor conformational changes relative to the native state. At W0 20, the size of the empty water-pool was larger than cutinase and the data was well described by a two-state model for both anionic and cationic reverse micelles. For AOT reverse micelles at W0 20, the intermediate state became a transient state and the deactivation and denaturation were described by a two-state model in which only native and denaturated cutinase were present. For CTAB/1-hexanol reverse micelles at W0 20, the native cutinase was in equilibrium with an intermediate state, which did not suffer denaturation. 1-Hexanol showed a stabilizing effect on cutinase in reverse micelles, contributing to the higher stabilities observed in the cationic CTAB/1-hexanol reverse micelles. Copyright 1998 John Wiley & Sons, Inc.     

Unsaturation at the surfactant head: influence on the activity of lipase and horseradish peroxidase in reverse micelles

Influence of unsaturation present at the surfactant head on the activity of interfacially located enzyme, lipase, and horseradish peroxidase (HRP) is investigated in cationic reverse micelles of a series of surfactants having unsaturated (allyl and pyridinium moieties) as well as analogous saturated (n-propyl and piperidinium moieties) polar head. Lipase activity increases with n-propyl (saturated) substitution as the increase in the headgroup area (A(min)) presumably provides greater space for the enzyme to attain flexible conformation and increases the local concentrations of enzyme and substrate at the interface. In contrast, activity of lipase decreases with increasing number of allyl (unsaturated) substitution though A(min) gradually increased. Similar trend in deactivation was observed when unsaturation is present in cyclic ring (pyridine) at the surfactant head in comparison to the saturated analogue, piperidine. Circular dichroism (CD) spectra of lipase in reverse micelles indicate that ellipticity in the far-UV region increases with increasing unsaturation. Thus, lipase probably loses its alpha-helix content and thereby its activity. Inhibition of biocatalyst with increasing unsaturation at the polar head of surfactant is also observed in case of HRP, an oxidoreductase enzyme.     

Reactivity of trypsin in reverse micelles: neglected role of aggregate size compared to water-pool components

The catalytic efficiency of trypsin was estimated in cationic reverse micelles as a function of the concentration of water-pool components and aggregate size to determine their independent influence on enzyme activity. The variation in the aggregate size/water-pool size was achieved by changing both the W0 (mole ratio of water to surfactant) and the headgroup area of surfactant through introduction of hydroxyethyl groups at the polar head. The local molar concentrations of water present inside the water-pool ([H2O]wp) of different cationic reverse micelles across varying W0 was estimated using a modified phenyl cation-trapping protocol. The [H2O]wp in cationic reverse micelles (surfactant/isooctane/n-hexanol/water) increases with W0 and attains the molarity of normal water beyond W0=40 irrespective of the nature of headgroup. Concurrently, the catalytic activity of trypsin compartmentalized within the water-pool increases with the increase in [H2O]wp upto an optimal W0=40 in organized solutions of any surfactant. The aggregate size (determined by static light scattering) also increases expectedly with W0 and noticeably with the area of the surfactant headgroup at similar W0. Since the enzyme activity rises both with the increase in water-pool size and [H2O]wp, trypsin's efficiency was compared with these two parameters across reverse micelles of varying surfactant headgroup size at similar W0 to determine their probable independent influence in regulating the enzyme activity. Noticeably, the efficiency of trypsin rises two to ninefold in spite of the [H2O]wp being distinctly lower in case of hydroxyethyl group substituted surfactants compared to cetyltrimethylammonium bromide w/o microemulsions at similar W0. Thus, the influence of the aggregate size possibly plays an important role alongwith the [H2O]wp in modulating the enzyme activity.     

Downstream processing of soy hull peroxidase employing reverse micellar extraction

Phase transfer studies were conducted to evaluate the solubilization of soy hull peroxidase (SHP) in reverse micelles formed in isooctane/butanol/hexanol using the cationic surfactant cetyltrimethylammonium bromide (CTAB). The effect of various parameters such as pH, ionic strength, surfactant concentration of the initial aqueous phase for forward extraction and buffer pH, type and concentration of salt, concentration of isopropyl alcohol and volume ratio for back extraction was studied to improve the efficiency of reverse micellar extraction. The active SHP was recovered after a complete cycle of forward and back extraction. A forward extraction efficiency of 100%, back extraction efficiency of 36%, overall activity recovery of 90% and purification fold of 4.72 were obtained under optimised conditions. Anionic surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) did not yield good results under the conditions studied. The phase transfer of soy hull peroxidase was found to be controlled by electrostatic and hydrophobic interactions during forward and back extraction respectively.     

Enzymatic activity of an extremely halophilic phosphatase from the Archaea Halobacterium salinarum in reversed micelles

Alkaline p-nitrophenylphosphate phosphatase (pNPPase) from the halophilic archaeon Halobacterium salinarum (previously halobium) was solubilized in reversed micelles of cetyltrimethylammonium bromide (CTAB) in cyclohexane with 1-butanol as cosurfactant. The hydrolysis reaction appears to follow Michaelis–Menten kinetics. The dependency of the maximum reaction rate (V_max) on the water content θ (% v/v) (or ω₀ value: molar ratio of water to surfactant concentrations) showed a bell-shaped curve for 0.3 M CTAB, but not for 0.2 M CTAB. The enzyme activity increased with the surfactant concentration at a constant ω₀ value (10.27). When the surfactant concentration was increased at a constant θ, the enzyme activity decreased. The enzyme was more stable in reversed micelles than in aqueous media.     

Reactivity of trypsin in reverse micelles: pH-effects on the W0 versus enzyme activity profiles

pH-Dependence of hydrolytic activity of trypsin has been studied in cationic reverse micellar system of cetyltrimethylammonium bromide (CTAB) in (50% v/v) chloroform/isooctane using a positively charged substrate N_α-benzoyl-L-arginine ethyl ester (BAEE). The pH of the medium was varied from 4.0 to 8.5 with addition of 0.025 M citrate-phosphate buffer containing 1 mM CaCl₂. Optimum pH for maximum enzyme activity, pH_opt in reverse micelles is found to be similar to that observed in bulk aqueous solution (8.0–8.5). However, changes in activity of trypsin (k_cat) as a function of water content W₀ (W₀ = [H₂O]/[CTAB]) in reverse micelles are found to be pH dependent. At low pH (4.0) and low water content (W₀ = 5) the enzyme is more active in reverse micelles than in bulk aqueous solution by a factor of 2. This ‘superactivity’ is lost at higher W₀ values and the k_cat in reverse micelles is found to be similar to that observed in aqueous bulk. At pH 5, the enzyme activity is found to be independent of W₀ while at pH 6.0–6.5 the enzyme activity is low at W₀ 5 and increases with water content to a constant value which is still 50% lower than that in aqueous buffer. Above pH 7, the W_o-activity profile becomes distinctly bell shaped with W₀ optimum around 10–15. The enzyme activity at optimum W₀ is close to that observed in aqueous bulk.     

Liquid-liquid extraction of commercial glucose oxidase by reversed micelles

Aim of this work was to establish the optimum operating conditions for the extraction and recovery by cationic reversed micelles of commercial glucose oxidase (GOX) from Aspergillus niger, in view of possible application to raw cell homogenates. The influence of pH, temperature, electric conductivity and solvent/co-solvents ratio on the extraction was investigated by a fractional factorial design of 2(3-1) type, conjugated with a mixture experimental design, using the residual enzyme activity to evaluate the results. The best conditions for GOX extraction were ensured using isooctane as solvent and hexanol and butanol as co-solvents at 76/6/18 volume ratio, pH 6.0, 0.2 M cetyl trimethylammonium bromide (CTAB) as cationic surfactant, and electrical conductivity (kappa) of 4.8 mS cm-1. The highest yield of GOX activity recovery (about 90%) was in fair accordance with the value predicted by the model.     

Mixed reverse micelles facilitated downstream processing of lipase involving water‐oil‐water liquid emulsion membrane

Our earlier work for the first time demonstrated that liquid emulsion membrane (LEM) containing reverse micelles could be successfully used for the downstream processing of lipase from Aspergillus niger. In the present work, we have attempted to increase the extraction and purification fold of lipase by using mixed reverse micelles (MRM) consisting of cationic and nonionic surfactants in LEM. It was basically prepared by addition of the internal aqueous phase solution to the organic phase followed by the redispersion of the emulsion in the feed phase containing enzyme, which resulted in globules of water‐oil‐water (WOW) emulsion for the extraction of lipase. The optimum conditions for maximum lipase recovery (100%) and purification fold (17.0‐fold) were CTAB concentration 0.075 M, Tween 80 concentration 0.012 M, at stirring speed of 500 rpm, contact time 15 min, internal aqueous phase pH 7, feed pH 9, KCl concentration 1 M, NaCl concentration 0.1 M, and ratio of membrane emulsion to feed volume 1:1. Incorporation of the nonionic surfactant (e.g., Tween 80) resulted in remarkable improvement in the purification fold (3.1–17.0) of the lipase. LEM containing a mixture of nonionic and cationic surfactants can be successfully used for the enhancement in the activity recovery and purification fold during downstream processing of enzymes/proteins. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1084–1092, 2014     

Tyrosinase activity in reversed micelles

The hydroxylase and oxidase activities of mushroom tyrosinase were studied in both sodium di-2-ethylhexylsulfosuccinate (AOT)/isooctane and cetyltrimethylammonium bromide (CTAB)/hexane/chloroform reversed micelles. The enzyme presented its highest activity when the water to surfactant molar ratio (W ₀) was 20 for both systems. When entrapped in the AOT reversed micelles, the enzyme activity decreased with the increase in AOT concentration at a constant W ₀, and the enzyme not only presented a higher reaction rate related to its oxidase activity but also a shorter lag period related to its hydroxylase activity. The relation between water activity and W ₀ revealed that enzyme activity in reversed micelles was more related to the size of the micelles which was determined by W ₀ and less to the water activity. Tyrosinase in CTAB reversed micelles showed potential for the analysis of o-diphenols.     

Hydrophobic tail length plays a pivotal role in amyloid beta (25–35) fibril–surfactant interactions

The amyloid β‐peptide fragment comprising residues 25–35 (Aβ_25‐35) is known to be the most toxic fragment of the full length Aβ peptide which undergoes fibrillation very rapidly. In the present work, we have investigated the effects of the micellar environment (cationic, anionic, and nonionic) on preformed Aβ_25‐35 fibrils. The amyloid fibrils have been prepared and characterized by several biophysical and microscopic techniques. Effects of cationic dodecyl trimethyl ammonium bromide (DTAB), cetyl trimethylammonium bromide (CTAB), anionic sodium dodecyl sulfate (SDS), and nonionic polyoxyethyleneoctyl phenyl ether (Triton X‐100 or TX) on fibrils have been studied by Thioflavin T fluorescence, UV–vis spectroscopy based turbidity assay and microscopic analyses. Interestingly, DTAB and SDS micelles were observed to disintegrate prepared fibrils to some extent irrespective of their charges. CTAB micelles were found to break down the fibrillar assembly to a greater extent. On the other hand, the nonionic surfactant TX was found to trigger the fibrillation process. The presence of a longer hydrophobic tail in case of CTAB is assumed to be a reason for its higher fibril disaggregating efficacy, the premise of their formation being largely attributed to hydrophobic interactions. Proteins 2016; 84:1213–1223. © 2016 Wiley Periodicals, Inc.     

Characterization of cholesterol oxidase activity in AOT-isooctane reverse micelles and its dependence on micelle size

Summary Characterization of cholesterol oxidase in AOT reverse micelles was performed. pH and temperature profiles show that the entrapment of the enzyme does not change its characteristics appreciably. The enzyme tends to behave as it does in water when micelle size increases and does not maximum rate at some intermediate micelle size. Km was 55–60 fold that in waterAbbreviations and parameters AOT Dioctyl sodium sulfosuccinate - CTAB Cetyl trimethylamonium bromide - K1^E Equilibrium constant of the enzyme between free and bound water - K2^E Equilibrium constant of the enzyme between bound water and surfactant - kf Catalytic constant in free water - kb Catalytic constant in bound water - ks Catalytic constant in surfactant - n Number of water molecules strongly bound to one surfactant molecule     

Interaction between covalent DNA gels and a cationic surfactant

The interaction of covalently cross-linked double-stranded (ds) DNA gels and cetyltrimethylammonium bromide (CTAB) is investigated. The volume transition of the gels that follows the absorption of the oppositely charged surfactant from aqueous solution is studied. As do other polyelectrolyte networks, DNA networks form complexes with oppositely charged surfactant micelles at surfactant concentrations far below the critical micelle concentration (cmc) of the polymer-free solution. The size of the absorbed surfactant aggregates is determined from time-resolved fluorescence quenching (TRFQ). At low surfactant concentrations, small discrete micelles (160 < N < 210) are found, whereas large micelles (N > 500) form at surfactant concentrations of 1 mM. When the DNA is in excess of the surfactant, the surfactant binding is essentially quantitative. The gel volume decreases by 90% when the surfactant to DNA charge ratio, beta, increases from 0 to 1.     

Higher order structure of Mucor miehei lipase and micelle size in cetyltrimethylammonium bromide reverse micellar system

The higher order structure of Mucor miehei lipase and micelle size in a cationic cetyltrimethylammonium bromide (CTAB) reverse micellar system was investigated. Circular dichroic (CD) measurement revealed that the lipase far-UV CD spectra changed markedly, going from buffer solution to the reverse micellar solution, and were very similar for any organic solvent used. The ellipticity of the solubilized lipase in the far-UV region markedly decreased with increasing water content (W(0): molar ratio of water to CTAB), indicating that the secondary structure of lipase changed with the water content. The linear correlation between the W(0) and the micelle size was obtained by measuring dynamic light scattering. From the linear correlation between the micelle size and W(0), the higher order structure of the solubilized lipase appears to be affected directly by the micellar interface. The species and concentration of alcohol as a cosurfactant had an inferior effect on lipase structure. Especially, at ratios of 1-pentanol to CTAB of less than 8, the secondary and tertiary structures of lipase were preserved in the reverse micelles. The CTAB concentration had little effect on the lipase structure in the micelles. The catalytic activity of the lipase solubilized in the CTAB reverse micelles increased with increasing the W(0).     

Spectroscopic properties of horse liver alcohol dehydrogenase in reversed micellar solutions

Catalytic and spectroscopic properties of alcohol dehydrogenase from horse liver, incorporated in reversed micellar media, have been studied. Two different reversed micellar systems have been used, one containing an anionic [sodium bis(2-ethylhexyl)sulfosuccinate, AOT], the other containing a cationic (cetyltrimethylammonium bromide, CTAB) surfactant. With 1-hexanol as substrate the turnover number of the enzyme in AOT-reversed micelles is strongly dependent on the water content of the system. At low wo ([H2O]/[surfactant]) (wo less than 20) no enzymatic activity can be detected whereas at high wo (wo = 40) the turnover is only slightly lower than in aqueous solution. In CTAB-reversed micelles the dependence of the turnover number on wo is much less. The enzymatic activity is in this case significantly lower than in aqueous solution and increases only slightly with an increasing water content of the reversed micelles. Possible interactions of the protein with the surfactant interfaces in the reversed micellar media were studied via circular dichroism and fluorescence measurements. From the circular dichroism of the protein backbone it is observed that the protein secondary structure is not significantly affected upon incorporation in the reversed micelles since the far-ultraviolet spectrum is not altered. Results from time-resolved fluorescence anisotropy experiments indicate that, especially in AOT-reversed micelles, interactions between the protein and the surfactant interface are largely electrostatic in nature, as evident from the dependence on the pH of the buffer used. In CTAB-reversed micellar solutions such interactions appear to be much less pronounced than in AOT.