Four genes, two ends, and a res region are involved in transposition of Tn5053: a paradigm for a novel family of transposons carrying either a mer operon or an integron

The complete nucleotide sequence of an 8447 bp-long mercury-resistance transposon (Tn 5053 ) has been determined. Tn 5053 is composed of two modules: (i) the mercury-resistance module and (ii) the transposition module. The mercury-resistance module carries a mer operon, merRTPFAD , and appears to be a single-ended relic of a transposon closely related to the classical mercury-resistance transposons Tn 21 and Tn 501 . The transposition module of Tn 5053 is bounded by 25 bp terminal inverted repeats and contains four genes involved in transposition, i.e. tniA, tniB, tniQ , and tniR . Transposition of Tn 5053 occurs via cointegrate formation mediated by the products of the tniABQ genes, followed by site-specific cointegrate resolution. This is catalysed by the product of the tniR gene at the res region, which is located upstream of tniR . The same pathway of transposition is used by Tn 402 (Tn 5090 ) which carries the integron of R751. Transposition genes of Tn 5053 and Tn 402 are interchangeable. Sequence analysis suggests that Tn 5053 and Tn 402 are representatives of a new family of transposable elements, which fall into a recently recognized superfamily of transposons including retroviruses, insertion sequences of the IS 3 family, and transposons Tn 552 and Tn 7 . We suggest that the tni genes were involved in the dissemination of integrons.     

Region-specific insertion of transposons in combination with selection for high plasmid transferability and stability accounts for the structural similarity of IncP-1 plasmids

The overall architecture of IncP-1 plasmids is very conserved in that the accessory genes are typically located in one or two specific regions: between oriV and trfA and between the tra and trb operons. Various hypotheses have been formulated to explain this, but none have been tested experimentally. We investigated whether this structural similarity is due to region-specific transposition alone or also is reliant on selection for plasmids with insertions limited to these two regions. We first examined the transposition of Tn21Km into IncP-1beta plasmid pBP136 and found that most Tn21Km insertions (67%) were located around oriV. A similar experiment using the oriV region of IncP-1beta plasmid pUO1 confirmed these results. We then tested the transferability, stability, and fitness cost of different pBP136 derivatives to determine if impairment of these key plasmid characters explained the conserved plasmid architecture. Most of the pBP136 derivatives with insertions in transfer genes were no longer transferable. The plasmids with insertions in the oriV-trfA and tra-trb regions were more stable than other plasmid variants, and one of these also showed a significantly lower fitness cost. In addition, our detailed sequence analysis of IncP-1 plasmids showed that Tn402/5053-like transposons are situated predominantly between the tra and trb operons and close to the putative resolution site for the ParA resolvase, a potential hot spot for those transposons. Our study presents the first empirical evidence that region-specific insertion of transposons in combination with selection for transferable and stable plasmids explains the structural similarity of IncP-1 plasmids.     

Toluene transposons Tn4651 and Tn4653 are class II transposons

The toluene degradative transposon Tn4651 is included within another transposon, Tn4653, and both of these elements are members of the Tn3 family. The tnpA gene product of each element mediates formation of cointegrates as intermediate products of transposition, and the tnpS and tnpT gene products encoded by Tn4651 take part in resolution of both Tn4651- and Tn4653-mediated cointegrates. Sequence analysis demonstrated that Tn4651 and Tn4653 have 46- and 38-base-pair terminal inverted repeats, respectively, and that both elements generate 5-base-pair duplication of the target sequence upon transposition. Complementation tests of the Tn4651- and Tn4653-encoded transposition functions with those of Tn3, Tn21, and Tn1721 showed that (i) the trans-acting transposition functions encoded by Tn4651 were not interchangeable with those encoded by the four other transposons, (ii) the Tn4653 tnpA function was interchangeable with the Tn1721 function, and (iii) Tn4653 coded for a resolvase (tnpR gene product) that complemented the tnpR mutations of Tn21 and Tn1721. The Tn4653 tnpR gene was located just 5' upstream of the tnpA gene and shared extensive sequence homology with the Tn1721 tnpR gene. The res region was located adjacent to the tnpR gene, and sequence analysis indicated that failure of the Tn4653 tnpR product to resolve the Tn4653-mediated cointegrates is ascribed to an incomplete structure of the res region.     

Definition of three resolvase binding sites at the res loci of Tn21 and Tn1721.

The dual functions of resolvase, site-specific recombination and the regulation of its own expression from tnpR, both require the interaction of this protein with the DNA sequence at res, but the specificity of this interaction differs between groups of Tn3-like elements. In this study, DNA fragments that contained res from Tn21 or Tn1721 were subjected to either cleavage by DNase I or methylation by dimethyl sulphate in the presence of the purified resolvase from Tn21 or Tn1721. These experiments showed that each resolvase bound to the same three sites (I, II and III) within res from Tn1721 and to an equivalent series of three sites on Tn21: the differences in the amino acid sequences of the two proteins did not affect their interaction with either DNA. The DNA sequences at each site had some similarities and, in conjunction with data from the related transposon Tn501, a consensus was established. However, the three sites are functionally distinct: site I (tnpR-distal) spans the recombination cross-over point and sites II and III (tnpR-proximal) overlap the promoter of tnpR. The binding sites on these transposons were compared with those in the gamma delta/Tn3 system: the similarities between the two groups of transposons revealed some general features of resolvase-DNA interactions while the differences in fine structure elucidated the specificity of each resolvase.     

Characterization of Tn3926, a new mercury-resistance transposon from Yersinia enterocolitica

A new transposon coding for mercury resistance (HgR), Tn3926, has been found in a strain of Yersinia enterocolitica, YE138A14. The element has a size of 7.8 kb and transposes to conjugative plasmids belonging to different incompatibility groups. A restriction map has been established. DNA-DNA hybridization indicates that Tn3926 displays homology with both Tn501 and Tn21; the greatest homology is shown with the regions of these transposons that encode HgR. Weaker homology is observed between Tn3926 sequences and those regions of Tn501 and Tn21 that encode transposition functions. Complementation experiments indicate that the Tn3926 transposase mediates transposition of Tn21, albeit somewhat inefficiently, but not of Tn501, while the resolvase mediates resolution of transposition cointegrates formed via Tn21, Tn501, or Tn1721.     

Structure of haloacetate-catabolic IncP-1beta plasmid pUO1 and genetic mobility of its residing haloacetate-catabolic transposon

The self-transmissible plasmid pUO1 from Delftia acidovorans strain B carries two haloacetate-catabolic transposons, TnHad1 and TnHad2, and the mer genes for resistance to mercury. The complete 67,066-bp sequence of pUO1 revealed that the mer genes were also carried by two Tn402/Tn5053-like transposons, Tn4671 and Tn4672, and that the pUO1 backbone regions shared 99% identity to those of the archetype IncP-1beta plasmid R751. Comparison of pUO1 with three other IncP-1beta plasmids illustrated the importance of transposon insertion in the diversity and evolution of this group of plasmids. Mutational analysis of the four outermost residues in the inverted repeats (IRs) of TnHad2, a Tn21-related transposon, revealed a crucial role of the second residue of its IRs in transposition.     

Identification and characterization of Tn4656, a novel class II transposon carrying a set of toluene-degrading genes from TOL plasmid pWW53

It has been reported that the toluene-degrading (xyl) genes from Pseudomonas putida plasmid pWW53 are able to translocate to broad-host-range drug resistance plasmid RP4, and pWW53-4 is one of the smallest RP4 derivatives (H. Keil, S. Keil, R. W. Pickup, and P. A. Williams, J. Bacteriol. 164:887-895, 1985). Our investigation of pWW53-4 in this study demonstrated that such a translocated region that is 39 kb long is a transposon. This mobile element, Tn4656, was classified as a class II transposon since its transposition occurred by a two-step process: transposase (TnpA)-mediated formation of the cointegrate and resolvase (TnpR)-mediated site-specific resolution of the cointegrate at the two copies of the res site. The Tn4656 TnpA and TnpR functions encoded in the rightmost 4-kb region were found to be exchangeable with those specified by other Tn1721-related class II transposons, including another toluene transposon, Tn4653. Sequence analysis of the transposition-related genes and sites of Tn4656 also supported the hypothesis that this transposon is closely related to the Tn1721-related transposons. The lower transposition frequency of Tn4656 has been suggested to be due to the unique nucleotide sequence of one of the terminal 39-bp inverted repeats.     

DNA sequences of and complementation by the tnpR genes of Tn21, Tn501 and Tn1721

DNA sequences that encode the tnpR genes and internal resolution (res) sites of transposons Tn21 and Tn501, and the res site and the start of the tnpR gene of Tn1721 have been determined. There is considerable homology between all three sequences. The homology between Tn21 and Tn501 extends further than that between Tn1721 and Tn501 (or Tn21), but in the homologous regions, Tn1721 is 93% homologous with Tn501, while Tn21 is only 72-73% homologous. The tnpR genes of Tn21 and Tn501 encode proteins of 186 amino acids which show homology with the tnpR gene product of Tn3 and with other enzymes that carry out site-specific recombination. However, in all three transposons, and in contrast to Tn3, the tnpR gene is transcribed towards tnpA gene, and the res site is upstream of both. The res site of Tn3 shows no obvious homology with the res regions of these three transposons. Just upstream of the tnpR gene and within the region that displays common homology between the three elements, there is a 50 bp deletion in Tn21, compared to the other two elements. A TnpR- derivative of Tn21 was complemented by Tn21, Tn501 and Tn1721, but not by Tn3.     

Plasmid-borne cadmium resistance genes in Listeria monocytogenes are present on Tn5422, a novel transposon closely related to Tn917.

The complete (6,449-bp) nucleotide sequence of the first-described natural transposon of Listeria monocytogenes, designated Tn5422, was determined. Tn5422 is a transposon of the Tn3 family delineated by imperfect inverted repeats (IRs) of 40 bp. It contains two genes which confer cadmium resistance (M. Lebrun, A. Audurier, and P. Cossart, J. Bacteriol. 176:3040-3048, 1994) and two open reading frames that encode a transposase (TnpA) and a resolvase (TnpR) of 971 and 184 amino acids, respectively. The cadmium resistance genes and the transposition genes are transcribed in opposite directions and are separated by a putative recombination site (res). The structural elements presumed to be involved in transposition of Tn5422 (IRs, transposase, resolvase, and res) are very similar to those of Tn917, suggesting a common origin. The transposition genes were not induced by cadmium. Analysis of sequences surrounding Tn5422 in nine different plasmids of L. monocytogenes indicated that Tn5422 is a functional transposon, capable of intramolecular replicative transposition, generating deletions. This transposition process is probably the reason for the size diversity of the L. monocytogenes plasmids. Restriction analysis and Southern hybridization revealed the presence of Tn5422 in all the plasmid-mediated cadmium-resistant L. monocytogenes strains tested but not in strains encoding cadmium resistance on the chromosome.     

Fine structure of transposition genes on Tn2603 and complementation of its tnpA and tnpR mutations by related transposons

The fine structure of the genes tnpA, tnpR and res of Tn2603 required for its own transposition, was determined. The order of the genes was tnpA-tnpR-res from the right end of the right hand side region in Tn2603, the tnpA and tnpR encoded gene products having molecular weights of 110,000 and 21,000, respectively. The 110,000 molecular weight polypeptides was absolutely required for replicon fusion as the first stage of transposition, and named transposase. On the other hand, the 21,000 molecular weight polypeptide was necessary for resolution of the cointegrate as the second stage of transposition, and named resolvase. We also examined the ability of various transposons, assumed to be closely related, to complement the tnpA and tnpR mutations of Tn2603. The results indicated that the mercury resistance transposon, Tn2613, and Tn501, can complement both genes, but TnAs and gamma delta cannot at all. Tn501 had much less efficiency of complementation for tnpA than Tn2613. We have also discovered that the transposition frequency of transposons in the tn2613 family systematically depend on their size of transposon.     

Tn951 derivatives designed for high-frequency plasmid-specific transposition and deletion mutagenesis

We describe the construction of a system allowing high-frequency transposition and deletion mutagenesis with class-II transposons containing a kanamycin or a chloramphenicol-resistance marker. The system utilizes the transposition function of Tn3 and the resolution function of Tn951/Tn2501 which leads to an uncoupling of the resolution and repression functions. It consists of defective transposons inserted into conjugative, replication thermosensitive plasmids. The properties of the system are: easily selectable resistance markers, high transposition frequencies onto plasmids, low transposition frequencies onto the host chromosome, placement of the tnpA gene outside the transposons so that "second-generation" transposition does not occur, possibility to transpose the whole system onto other plasmid vectors with different selection strategies, consecutive use of two transposons for deletion mutagenesis and restriction mapping.     

Complete sequence determination combined with analysis of transposition/site-specific recombination events to explain genetic organization of IncP-7 TOL plasmid pWW53 and related mobile genetic elements

Recent studies have indicated that the evolutionarily common catabolic gene clusters are loaded on structurally diverse toluene-catabolic (TOL) plasmids and their residing transposons. To elucidate the mechanisms supporting the diversification of catabolic plasmids and transposons, we determined here the complete 107,929 bp sequence of pWW53, a TOL plasmid from Pseudomonas putida MT53. pWW53 was found to belong to the IncP-7 incompatibility group that play important roles in the catabolism of several xenobiotics. pWW53 carried two distinct transposase-resolvase gene clusters (tnpAR modules), five short terminal inverted repeats (IRs), and three site-specific resolution (res) sites that are all typical of class II transposons. This organization of pWW53 suggested the four possible transposable regions, Tn4657 to Tn4660. The largest 86 kb region (Tn4657) spanned the three other regions, and Tn4657 and Tn4660 (62 kb) covered all of the 36 xyl genes for toluene catabolism. Our subsequent transposition experiments clarified that the three transposons, Tn4657 to Tn4659, indeed exhibit their transposability, and that pWW53 also generated another 37 kb toluene-catabolic transposon, Tn4656, which carried the two separated and inversely oriented segments of pWW53: the tnpRA-IR module of Tn4658 and a part of xyl gene clusters on Tn4657. The Tn4658 transposase was able to mediate the transposition of Tn4658, Tn4657, and Tn4656, while the Tn4659 transposase catalyzed only the transposition of Tn4659. Tn4656 was formed by the Tn4658 resolvase-mediated site-specific inversion between the two inversely oriented res sites on pWW53. These findings and comparison with other catabolic plasmids clearly indicate multiple copies of transposition-related genes and sites on one plasmid and their recombination activities contribute greatly to the diversification of plasmid structures as well as wide dissemination of the evolutionary common gene clusters in various plasmids.     

The resolvase/invertase domain of the site-specific recombinase TnpX is functional and recognizes a target sequence that resembles the junction of the circular form of the Clostridium perfringens transposon Tn4451.

Tn4451 is a 6.3-kb chloramphenicol resistance transposon from Clostridium perfringens and is found on the conjugative plasmid pIP401. The element undergoes spontaneous excision from multicopy plasmids in Escherichia coli and C. perfringens and conjugative excision from pIP401 in C. perfringens. Tn4451 is excised as a circular molecule which is probably the transposition intermediate. Excision of Tn4451 is dependent upon the site-specific recombinase TnpX, which contains potential motifs associated with both the resolvase/invertase and integrase families of recombinases. Site-directed mutagenesis of conserved amino acid residues within these domains was used to show that the resolvase/invertase domain was essential for TnpX-mediated excision of Tn4451 from multicopy plasmids in E. coli. An analysis of Tn4451 target sites revealed that the transposition process showed target site specificity. The Tn4451 target sequence resembled the junction of the circular form, and insertion occurred at a GA dinucleotide. Tn4451 insertions were flanked by directly repeated GA dinucleotides, and there was also a GA at the junction of the circular form, where the left and right termini of Tn4451 were fused. We propose a model for Tn4451 excision and insertion in which the resolvase/invertase domain of TnpX introduces 2-bp staggered cuts at these GA dinucleotides. Analysis of Tn4451 derivatives with altered GA dinucleotides provided experimental evidence to support the model.     

Characterization of the staphylococcal beta-lactamase transposon Tn552.

The staphylococcal beta-lactamase transposon Tn552 is a member of a novel group of transposable elements. The organization of genes in Tn552 resembles that of members of the Tn21 sub-group of Tn3 family transposons, which transpose replicatively by cointegrate formation and resolution. Thus, a possible resolution site ('resL') and a resolvase gene (tnpR or 'binL') have been identified. However, consistent with the fact that Tn552 generates 6 bp (rather than 5 bp) flanking direct repeats of target DNA, neither the putative transposase protein, nor the terminal inverted repeats of Tn552 are homologous to those of Tn3 elements. Tn552, like phage Mu and retroelements, is defined by the terminal dinucleotides 5' TG .. CA 3'. A naturally occurring staphylococcal plasmid, pI9789, contains a Tn552-derived resolution system ('resR-binR') that acts as a 'hotspot' for Tn552 transposition; insertion creates a segment of DNA flanked by inversely repeated resolution sites, one (resR) on pI9789 and the other (resL) on Tn552. The putative Tn552 resolvase, the most closely related of known resolvases to the homologous DNA invertases, initially was identified as a DNA invertase ('Bin') as a result of its ability to mediate efficient inversion of this segment in vivo.     

Site-specific recombination systems for the genetic manipulation of eukaryotic genomes

Site-specific recombination systems, such as the bacteriophage Cre-lox and yeast FLP-FRT systems, have become valuable tools for the rearrangement of DNA in higher eukaryotes. As a first step to expanding the repertoire of recombination tools, we screened recombination systems derived from the resolvase/invertase family for site-specific recombinase activity in the fission yeast Schizosaccharomyces pombe. Here, we report that seven recombination systems, four from the small serine resolvase subfamily (CinH, ParA, Tn1721, and Tn5053) and three from the large serine resolvase subfamily (Bxb1, TP901-1, and U153), can catalyze site-specific deletion in S. pombe. Those from the large serine resolvase subfamily were also capable of site-specific integration and inversion. In all cases, the recombination events were precise. Functional operation of these recombination systems in the fission yeast holds promise that they may be further developed as recombination tools for the site-specific rearrangement of plant and animal genomes.     

Transposon Tn5090 of plasmid R751, which carries an integron, is related to Tn7, Mu, and the retroelements.

Integrons confer on bacterial plasmids a capability of taking up antibiotic resistance genes by integrase-mediated recombination. We show here that integrons are situated on genetic elements flanked by 25-bp inverted repeats. The element carrying the integron of R751 has three segments conserved with similar elements in Tn21 and Tn5086. Several characteristics suggest that this element is a transposon, which we call Tn5090. Tn5090 was shown to contain an operon with three open reading frames, of which two, tniA and tniB, were predicted by amino acid similarity to code for transposition proteins. The product of tniA (559 amino acids) is a probable transposase with 25% amino acid sequence identity to TnsB from Tn7. Both of these polypeptides contain the D,D(35)E motif characteristic of a protein family made up of the retroviral and retrotransposon IN proteins and some bacterial transposases, such as those of Tn552 and of a range of insertion sequences. Like the transposase genes in Tn552, Mu, and Tn7, the tniA gene was followed by a gene, tniB, for a probable ATP-binding protein. The ends of Tn5090, like those of most other elements producing D,D(35)E proteins, begin by 5'-TG and also contains a complex structure with four 19-bp repeats at the left end and three at the right end. Similarly organized repeats have been observed earlier at the termini of both Tn7 and phage Mu, where they bind their respective transposases and have a role in holoenzyme assembly. Another open reading frame observed in Tn5090, tniC, codes for a recombinase of the invertase/resolvase family, suggesting a replicative transposition mechanism. The data presented here suggest that Tn5090, Tn7, Tn552, and Mu form a subfamily of bacterial transposons which in parallel to many insertion sequences are related to the retroelements.     

Bacteroides fragilis transfer factor Tn5520: the smallest bacterial mobilizable transposon containing single integrase and mobilization genes that function in Escherichia coli

Many bacterial genera, including Bacteroides spp., harbor mobilizable transposons, a class of transfer factors that carry genes for conjugal DNA transfer and, in some cases, antibiotic resistance. Mobilizable transposons are capable of inserting into and mobilizing other, nontransferable plasmids and are implicated in the dissemination of antibiotic resistance. This paper presents the isolation and characterization of Tn5520, a new mobilizable transposon from Bacteroides fragilis LV23. At 4,692 bp, it is the smallest mobilizable transposon reported from any bacterial genus. Tn5520 was captured from B. fragilis LV23 by using the transfer-deficient shuttle vector pGAT400DeltaBglII. The termini of Tn5520 contain a 22-bp imperfect inverted repeat, and transposition does not result in a target site repeat. Tn5520 also demonstrates insertion site sequence preferences characterized by A-T-rich nucleotide sequences. Tn5520 has been sequenced in its entirety, and two large open reading frames whose predicted protein products exhibit strong sequence similarity to recombinase-integrase enzymes and mobilization proteins, respectively, have been identified. The transfer, mobilization, and transposition properties of Tn5520 have been studied, revealing that Tn5520 mobilizes plasmids in both B. fragilis and Escherichia coli at high frequency and also transposes in E. coli.     

IS50-mediated inverse transposition: specificity and precision

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.