A methodology for in silico endovascular repair of abdominal aortic aneurysms

Endovascular aneurysm repair (EVAR) can involve some unfavorable complications such as endoleaks or stent-graft (SG) migration. Such complications, resulting from the complex mechanical interaction of vascular tissue, SG and blood flow or incompatibility of SG design and vessel geometry, are difficult to predict. Computational vascular mechanics models can be a predictive tool for the selection, sizing and placement process of SGs depending on the patient-specific vessel geometry and hence reduce the risk of potential complications after EVAR. In this contribution, we present a new in silico EVAR methodology to predict the final state of the deployed SG after intervention and evaluate the mechanical state of vessel and SG, such as contact forces and wall stresses. A novel method to account for residual strains and stresses in SGs, resulting from the precompression of stents during the assembly process of SGs, is presented. We suggest a parameter continuation approach to model various different sizes of SGs within one in silico EVAR simulation which can be a valuable tool when investigating the issue of SG oversizing. The applicability and robustness of the proposed methods are demonstrated on the example of a synthetic abdominal aortic aneurysm geometry.     

In-stent graft helical flow intensity reduces the risk of migration after endovascular aortic repair

During the last years endovascular aneurysm repair (EVAR) became the elective treatment for abdominal aortic aneurysms (AAAs) thanks to lower mortality and morbidity rates than open surgery. In face of these advantages, stent-graft performances are still clinically suboptimal. In particular, post-surgical complications derive from device migration as a consequence of the hemodynamic forces acting on the endograft. In this regard, while the importance of hemodynamic surface forces is well recognized, the role of the in-stent flow is still unclear. Here we hypothesize that in-stent helical blood flow patterns might influence the distribution of the displacement forces (DFs) acting on the stent-graft and, ultimately, the risk of stent migration. To test this hypothesis, the hemodynamics of 20 post-EVAR models of patients treated with two different commercial endografts was analyzed using computational hemodynamics.The main findings of the study indicate that: (1) helical flow intensity decreases the risk of endograft migration, as given by an inverse correlation between helicity intensity (h₂) and time-averaged displacement forces (TADFs) (p < 0.05); (2) unbalanced counter-rotating helical structures in the legs of the device contribute, in particular along the systole, to significantly suppress TADFs (p < 0.01); (3) as expected, helical flow intensity is positively correlated with pressure drop and resistance to flow (p < 0.001). The findings of this study suggest that a design strategy promoting in-stent helical flow structures could contribute to minimize the risk of migration of implanted EVAR devices.     

Thoracic aorta dissection associated with aberrant right subclavian artery: treatment with endovascular stent-graft placement

Dissecting aneurysm is the condition produced by separation of the layers of the arterial wall by circulating blood. Although rare, the coexistence of aortic dissection and aberrant right subclavian artery may be catastrophic. In this study we report the endovascular treatment of a patient with thoracic aorta dissection associated with aberrant right subclavian artery. Aortic clamping proximal to the left subclavian artery in a patient with an aberrant right subclavian artery slows or eliminates flow to both vertebral arteries. Endovascular repair eliminates the complications associated with aortic clamping during surgical repair in the presence of an aberrant right subclavian artery; therefore, it should be considered the treatment of choice in this situation.     

Computer modelling of maximal displacement forces in endoluminal thoracic aortic stent graft

The objective of this study was to determine the orientation and magnitude of maximal displacement forces (DFs) in the thoracic aortic aneurysm endograft (TAA endograft) in three-dimensional (3D) space. Theoretical computer model representing the anatomically worst-case scenario with respect to DF magnitude was used to calculate the magnitude and orientation of maximal DF. A patient-specific anatomical computer model of typically seen, average size anatomy was used to analyse the progression of DF throughout the cardiac cycle. Maximal DFs were 35.01 and 37.32 N in standing and supine position, respectively, in 46-mm diameter TAA graft with 90° bend. A patient-specific model shows that a maximal DF magnitude is achieved at the peak systolic flow. In both models, the orientation of the DF vector was perpendicular to the greater curvature of the aorta, with upward (cranial) and sideways components. The effect of shearing force on the total DF that acts on the TAA endograft was found negligible due to the several orders of magnitude stronger contribution of pressure forces to the total DF relative to the wall shear stress contribution, resulting in aortic diameters and angulation being the main drivers of DF. It was discovered that the TAA endografts can be subjected to much stronger DF than previously suspected. The magnitude of maximal DF in thoracic aorta in the worst-case scenario could be as high as 35.01 N (standing) and 37.32 N (supine). This new information should be used in the process of designing new generations of TAA endografts with better migration resistance properties.     

Fluid-structure interaction based study on the physiological factors affecting the behaviors of stented and non-stented thoracic aortic aneurysms

Endovascular aneurysm repair (EVAR) is considered as a promising alternative technique for the treatment of aortic aneurysm. However, complications often occur after EVAR. In this paper, the influence of the physiological factors on the biomechanical behaviors of stented and non-stented thoracic aortic aneurysm (TAA) were presented. Representative TAA models with different intraluminal thrombus (ILT) volume before and after stent-graft (SG) implantation were built. Fluid-structure interaction effect was taken into account. The relative sliding between the SG wall and the aortic wall was allowed. Results showed that the cardiac cycle and ILT volume should be given much more consideration than previously thought in future investigations on TAA compliance. The time-averaged longitudinal displacement of SG necks were not uniformly distributed along circumferential direction of the aortic wall. Drag force increased with the increase of the cardiac cycle and decreased with the decrease of ILT volume. Computational results of TAA wall stress, sac and lumen pressure indicated that patient with faster heart rate might be at great risk of aneurysm rupture. The stress absorption effect of the SG was influenced by both ILT and cardiac cycle, which was also found to have strong impact on flow pattern. We believe that this study will bring new insights into further researches on the relevant issues and provide mechanics-based implications for clinical management of EVAR for TAA patient.     

The distal aorta in the Marfan syndrome

Prolonged survival of patients with Marfan syndrome after aortic root replacement has led to an increased number of patients with aortic complications beyond the root. Elective replacement of the aortic root removes the most important predilection site for aneurysms, but the distal aorta remains at risk. Predictors for aortic growth and adverse events in the distal aorta include aortic diameter, aortic distensiblity, previous aortic root replacement, hypertension and aortic regurgitation. After aortic dissection, the initial false lumen diameter is an independent predictor for late aneurysm formation. Although there are a few reports of short-term success after endovascular stent grafting of the descending thoracic aorta, stent grafting in patients with Marfan syndrome is not recommended unless intervention is clearly indicated and the risk of conventional open surgical repair is deemed prohibitive. Optimal long-term outcome demands lifelong radiographic follow-up and medical treatment with β-blocker therapy. After aortic dissection rigorous antihypertensive medication is of utmost importance. Losartan, an angiotensin II type I receptor antagonist, might offer the first potential for primary prevention of clinical manifestations in Marfan syndrome, but the results of clinical trials have to be awaited. (Neth Heart J 2008;16:382-6.)     

A New Murine Model of Endovascular Aortic Aneurysm Repair

Endovascular aneurysm exclusion is a validated technique to prevent aneurysm rupture. Long-term results highlight technique limitations and new aspects of Abdominal aortic aneurysm (AAA) pathophysiology. There is no abdominal aortic aneurysm endograft exclusion model cheap and reproducible, which would allow deep investigations of AAA before and after treatment. We hereby describe how to induce, and then to exclude with a covered coronary stentgraft an abdominal aortic aneurysm in a rat. The well known elastase induced AAA model was first reported in 1990¹ in a rat, then described in mice². Elastin degradation leads to dilation of the aorta with inflammatory infiltration of the abdominal wall and intra luminal thrombus, matching with human AAA. Endovascular exclusion with small covered stentgraft is then performed, excluding any interactions between circulating blood and the aneurysm thrombus. Appropriate exclusion and stentgraft patency is confirmed before euthanasia by an angiography thought the left carotid artery. Partial control of elastase diffusion makes aneurysm shape different for each animal. It is difficult to create an aneurysm, which will allow an appropriate length of aorta below the aneurysm for an easy stentgraft introduction, and with adequate proximal and distal neck to prevent endoleaks. Lots of failure can result to stentgraft introduction which sometimes lead to aorta tear with pain and troubles to stitch it, and endothelial damage with post op aorta thrombosis. Giving aspirin to rats before stentgraft implantation decreases failure rate without major hemorrhage. Clamping time activates neutrophils, endothelium and platelets, and may interfere with biological analysis.     

Model reduction methodology for computational simulations of endovascular repair

Endovascular aneurysm repair (EVAR) is a current alternative treatment for thoracic and abdominal aortic aneurysms, but is still sometimes compromised by possible complications such as device migration or endoleaks. In order to assist clinicians in preventing these complications, finite element analysis (FEA) is a promising tool. However, the strong material and geometrical nonlinearities added to the complex multiple contacts result in costly finite-element models. To reduce this computational cost, we establish here an alternative and systematic methodology to simplify the computational simulations of stent-grafts (SG) based on FEA. The model reduction methodology relies on equivalent shell models with appropriate geometrical and mechanical parameters. It simplifies significantly the contact interactions but still shows very good agreement with a complete reference finite-element model. Finally, the computational time for EVAR simulations is reduced of a factor 6–10. An application is shown for the deployment of a SG during thoracic endovascular repair, showing that the developed methodology is both effective and accurate to determine the final position of the deployed SG inside the aneurysm.     

Fluid Dynamics of Coarctation of the Aorta and Effect of Bicuspid Aortic Valve

Up to 80% of patients with coarctation of the aorta (COA) have a bicuspid aortic valve (BAV). Patients with COA and BAV have elevated risks of aortic complications despite successful surgical repair. The development of such complications involves the interplay between the mechanical forces applied on the artery and the biological processes occurring at the cellular level. The focus of this study is on hemodynamic modifications induced in the aorta in the presence of a COA and a BAV. For this purpose, numerical investigations and magnetic resonance imaging measurements were conducted with different configurations: (1) normal: normal aorta and normal aortic valve; (2) isolated COA: aorta with COA (75% reduction by area) and normal aortic valve; (3) complex COA: aorta with the same severity of COA (75% reduction by area) and BAV. The results show that the coexistence of COA and BAV significantly alters blood flow in the aorta with a significant increase in the maximal velocity, secondary flow, pressure loss, time-averaged wall shear stress and oscillatory shear index downstream of the COA. These findings can contribute to a better understanding of why patients with complex COA have adverse outcome even following a successful surgery.     

In situ diode laser fenestration: An ex‐vivo evaluation of irradiation effects on human aortic tissue

The in situ laser fenestration is an interesting option for the endovascular treatment of short‐necked aneurysms with an intraoperative modification of a standard endograft. According to literature evidence, diode laser emitting in the near‐infrared wavelength (810 nm) can be successfully used to fenestrate the endograft fabric. This paper describes a three‐dimensional navigation system for the accurate targeting of the fenestration site, then reports results of an ex vivo study to assess whether the laser operative conditions, which ensure the fabric fenestration, are harmless for the biological tissue surrounding the endoprosthesis. Two hundred twenty‐five samples of human aorta, including healthy specimens and abdominal aortic aneurysm samples, were irradiated ex vivo using a 810 nm diode laser. Energy and pulse duration were varied. Irradiated tissues were fixed in formaldehyde, sectioned and subjected to histological examination. Only 7.5% of the irradiated samples exhibited a thermal damage, which was always confined to the contact point between the laser fiber tip and the aortic wall. These experiments suggest that the diode laser can be safely used for the proposed surgical application.     

Experiments on dynamic behaviour of a Dacron aortic graft in a mock circulatory loop

Woven Dacron grafts are currently used for the surgical treatment of aortic aneurysm and acute dissection, two otherwise fatal pathologies when aortic wall rupture occurs. While Dacron is chosen for aortic grafts because of characteristics such as biocompatibility and durability, few data are available about the dynamic response of Dacron prosthetic devices and about their side effects on the cardiovascular system. In this study, a Dacron graft was subjected to physiological flow conditions in a specifically-developed mock circulatory loop. Experiments were conducted at different physiological pulsation-per-minute rates. Results show that, in comparison to an aortic segment of the same length, the prosthesis is extremely stiffer circumferentially, thus limiting the dynamical radial expansion responsible for the Windkessel effect in human arteries. The prosthesis is instead excessively compliant in the axial direction and develops preferentially bending oscillations. This very different dynamic behaviour with respect to the human aorta can alter cardiovascular pressure and flow dynamics resulting in long-term implant complications.     

Mechano-biology in the thoracic aortic aneurysm: a review and case study

An aortic aneurysm is a permanent and localized dilatation of the aorta resulting from an irreversible loss of structural integrity of the aortic wall. The infrarenal segment of the abdominal aorta is the most common site of aneurysms; however, they are also common in the ascending and descending thoracic aorta. Many cases remain undetected because thoracic aortic aneurysms (TAAs) are usually asymptomatic until complications such as aortic dissection or rupture occurs. Clinical estimates of rupture potential and dissection risk, and thus interventional planning for TAAs, are currently based primarily on the maximum diameter and growth rate. The growth rate is calculated from maximum diameter measurements at two subsequent time points; however, this measure cannot reflect the complex changes of vessel wall morphology and local areas of weakening that underline the strong regional heterogeneity of TAA. Due to the high risks associated with both open and endovascular repair, an intervention is only justified if the risk for aortic rupture or dissection exceeds the interventional risks. Consequently, TAAs clinical management remains a challenge, and new methods are needed to better identify patients for elective repair. We reviewed the pathophysiology of TAAs and the role of mechanical stresses and mathematical growth models in TAA management; as a proof of concept, we applied a multiscale biomechanical analysis to a case study of TAA.     

Hybrid thoracic stent graft repair of a complex type B aortic dissection in a patient who presented three weeks after repair of a type a aortic dissection

Long-term management after repair of a type A aortic dissection includes aggressive medical therapy and routine surveillance with serial imaging to ensure thrombosis of the false lumen. Retained patency of the false lumen can lead to either the development of a false lumen aneurysm with a subsequent rupture or extension of dissection. Typically such events occur late, usually months after repair, and are treated with either a conventional one-stage open thoracoabdominal repair or a two-stage "elephant trunk" procedure. However, most patients who undergo such procedures experience major complications and the procedure-related mortality rate is high. We present a unique case of a 61-year-old woman who presented with a ruptured type B aortic dissection 3 weeks after repair of a type A aortic dissection. She underwent an emergent thoracotomy and primary repair of the ruptured aorta followed by concomitant arch debranching and thoracic stent graft placement. Simultaneous surgical debranching with a median sternotomy and endovascular repair with stent grafts is an attractive hybrid approach in patients who present with an acute rupture of a false lumen aneurysm soon after initial repair of an aortic dissection, a situation in which a conventional repair is not feasible. This report emphasizes that hybrid thoracic stent graft repair should be considered for such high-risk patients in the near future as it offers them relatively lower morbidity and mortality compared with what is seen with conventional repairs.     

Blood flow patterns and pressure loss in the ascending aorta: A comparative study on physiological and aneurysmal conditions

An aortic aneurysm is defined as a balloon-shaped bulging of all three histologic components of the aortic vessel walls (intima, media and adventitia). This dilation results from vessel weakening owing to remodeling, i.e. due to cystic degeneration of the Tunica media (Marfan), progression of atherosclerosis or presence of a bicuspid aortic valve. The growth rate of the aortic diameter varies from patient to patient and may progress until the aneurysm ultimately ruptures. The role of hemodynamics, i.e. blood flow patterns, and shear stresses that are supposed to intensify during aneurysm growth are not yet fully understood, but thought to play a key role in the enlargement process. The aim of this study is to characterize the aortic blood flow in a silicone model of a pathological aorta with ascending aneurysm, to analyze the differences in the blood flow pattern compared to a healthy aortic model, and to single out possible blood flow characteristics measurable using phase contrast magnetic resonance imaging (MRI) that could serve as indicators for aneurysm severity. MRI simulations were performed under physiological, pulsatile flow conditions using data obtained from optical three dimensional particle tracking measurements. In comparison to the healthy geometry, elevated turbulence intensity and pressure loss are measured in the diseased aorta, which we propose as a complimentary indicator for assessing the aneurysmal severity. Our results shed a light on the interplay between the blood flow dynamics and their contribution to the pathophysiology and possible role for future risk assessment of ascending aortic aneurysms.     

Approaches for treatment of aortic arch aneurysm,a numerical study

Aortic arch aneurysm is a complex pathology which requires coverage of one or more aortic arch vessels. In this study we explore the hemodynamic behavior of the aortic arch in aneurysmatic and treated cases with three currently available treatment approaches: Surgery Graft, hybrid Stent-Graft and chimney Stent Graft. The analysis included four models of the time-dependent fluid domains of aneurysmatic arch and of the surgery, hybrid and chimney endovascular techniques. Dimensions of the models are based on typical anatomy, and boundary conditions are based on typical physiological flow.The simulations used computational fluid dynamics (CFD) methods to delineate the time-dependent flow dynamics in the four geometric models.Results of velocity vectors, flow patterns, blood pressure and wall shear stress distributions are presented.The results delineate disturbed and recirculating flow in the aortic arch aneurysm accompanied with low wall shear stress and velocities, compared to a uniformly directed flow and nominal wall shear stress (WSS) in the model of Surgery graft. Out of the two endograft procedures, the hybrid procedure clearly exhibits better hemodynamic performances over the chimney model, with lower WSS, lower pressure drop and less disturbed and vortical flow regions. Although the chimney procedure requires less manufacturing time and cost, it is associated with higher risk rates, and therefore, it is recommended only for emergency cases. This study may shed light on the hemodynamic factors for these complications and provide insight into ways to improve the procedure.     

基质金属蛋白酶3、9在升主动脉瘤中的表达

目的探讨基质金属蛋白酶3、9(MMP-3、MMP-9)在升主动脉瘤发病机制中的作用.方法将40只幼年Wistar大鼠随机分为对照组和实验组,制备升主动脉缩窄鼠模型.于术后3-5个月取升主动脉,采用HE染色和免疫组化技术,观察升主动脉形态学变化及MMP-3、MMP-9的蛋白表达.结果升主动脉瘤中MMP-3、MMP-9表达强阳性.结论 MMP-3、MMP-9在升主动脉瘤成因中有可能有重要作用.     

Normal and abnormal development of the aortic wall and valve: correlation with clinical entities

Dilation of the wall of the thoracic aorta can be found in patients with a tricuspid (TAV) as well as a bicuspid aortic valve (BAV) with and without a syndromic component. BAV is the most common congenital cardiovascular malformation, with a population prevalence of 0.5–2 %. The clinical course is often characterised by aneurysm formation and in some cases dissection. The non-dilated aortic wall is less well differentiated in all BAV as compared with TAV, thereby conferring inherent developmental susceptibility. Furthermore, a turbulent flow, caused by the inappropriate opening of the bicuspid valve, could accelerate the degenerative process in the aortic wall. However, not all patients with bicuspidy develop clinical complications during their life. We postulate that the increased vulnerability for aortic complications in a subset of patients with BAV is caused by a defect in the early development of the aorta and aortic valve. This review discusses histological and molecular genetic aspects of the normal and abnormal development of the aortic wall and semilunar valves. Aortopathy associated with BAV could be the result of a shared developmental defect during embryogenesis.     

腔内修复术与传统开腹手术对腹主动脉瘤的治疗效果对比

目的:探讨腔内修复术与传统开腹手术在腹主动脉瘤患者治疗中的效果。方法:收集我院就诊或住院治疗的40例腹主动脉瘤患者,根据手术方式不同,将所选研究对象分为OR组和EVAR组,每组20例。OR组患者行传统开腹手术,EVAR组患者行腔内修复术。观察并比较两组患者术中出血量、输血量、手术时间、住院天数以及并发症的发生率。结果:与OR组患者相比,EVAR组患者手术出血量、输血量较少,手术时间、住院天数、ICU住院天数较短,患者围手术期的并发症发生率较低,但患者的远期并发症发生率较高(P0.05)。结论:腔内修复术与传统开腹手术相比,在手术的出血量以及患者的恢复时间等方面具有较为明显的优点,但远期的并发症发生率较高,对临床有指导意义。     

Different Long-Term Outcomes of Abdominal Aortic Aneurysm and Intracranial Aneurysm Models: Hemodynamic Change may also Play an Essential Role in the Initiation and Progression of Abdominal Aortic Aneurysm in Rabbits

Self-healing phenomenon was found in the periarterial elastase-induced abdominal aortic aneurysm (AAA) in rabbit. This kind of aneurysm model does not progress and heals spontaneously in the long term, which is quite different from the performance of AAA disease in human. In order to better mimic human AAA and overcome this shortcoming of traditional AAA model in rabbit, we studied the pathogenesis of cerebral aneurysm (CA) model in small animal, which shows an excellent long-term patency and progressive enlargement. We found that hemodynamic conditions, such as turbulence flow, high blood flow, and shear stress, play an important role in the formation and progression of CA. So, we hypothesize that hemodynamic change may also play an essential role in the initiation and progression of rabbit AAA, and self-healing will be overcome if hemodynamic condition changes by coarctation of infra-renal aorta after elastase incubation.     

Computational modeling of shear-based hemolysis caused by renal obstruction

As endovascular treatment of abdominal aortic aneurysms (AAAs) gains popularity, it is becoming possible to treat certain challenging aneurysmal anatomies with endografts relying on suprarenal fixation. In such anatomies, the bare struts of the device may be placed across the renal artery ostia, causing partial obstruction to renal artery blood flow. Computational fluid dynamics (CFD) was used to simulate blood flow from the aorta to the renal arteries, utilizing patient-specific boundary conditions, in three patient models and calculate the degree of shear-based blood damage (hemolysis). We used contrast-enhanced computed tomography angiography (CTA) data from three AAA patients who were treated with a novel endograft to build patient-specific models. For each of the three patients, we constructed a baseline model and endoframe model. The baseline model was a direct representation of the patient's 30-day post-operative CTA data. This model was then altered to create the endoframe model, which included a ring of metallic struts across the renal artery ostia. CFD was used to simulate blood flow, utilizing patient-specific boundary conditions. Pressures, flows, shear stresses, and the normalized index of hemolysis (NIH) were quantified for all patients. The overall differences between the baseline and endoframe models for all three patients were minimal, as measured though pressure, volumetric flow, velocity, and shear stress. The average NIH across the three baseline and endoframe models was 0.002 and 0.004, respectively. Results of CFD modeling show that the overall disturbance to flow caused by the presence of the endoframe struts is minimal. The magnitude of the NIH in all models was well below the accepted design and safety threshold for implantable medical devices that interact with blood flow.