Physico-chemical and morphological characteristics of New Zealand Taewa (Maori potato) starches

The physico-chemical, morphological, thermal, pasting, textural, and retrogradation properties of the starches isolated from four traditional Taewa (Maori potato) cultivars (Karuparera, Tutaekuri, Huakaroro, Moemoe) of New Zealand were studied and compared with starch properties of a modern potato cultivar (Nadine). The relationships between the different starch characteristics were quantified using Pearson correlation and principal component analysis. Significant differences were observed among physico-chemical properties such as phosphorus content, amylose content, swelling power, solubility and light transmittance of starches from the different potato cultivars. The starch granule morphology (size and shape) for all the potato cultivars showed considerable variation when studied by scanning electron microscopy and particle size analysis. Starch granules from Nadine and Moemoe cultivars showed the presence of large and irregular or cuboid granules in fairly high number compared with the starches from the other cultivars. The transition temperatures (T_o; T_p; T_c) and the enthalpies (ΔH_gel) associated with gelatinization suggested differences in the stability of the crystalline structures among these potato starches. The Moemoe starch showed the lowest T_o, while it was higher for Tutaekuri and Karuparera starches. Pasting properties such as peak, final and breakdown viscosity and texture profile analysis (TPA) parameters of starch gels such as hardness and fracturability were found to be higher for Nadine and Huakaroro starches. The Nadine and Huakaroro starch gels also had lower tendency towards retrogradation as evidenced by their lower syneresis (%) during storage at 4 °C. Principal component analysis showed that the Tutaekuri and Nadine cultivars differed to the greatest degree in terms of the properties of their starches.     

Effect of acid–alcohol treatment on the molecular structure and physicochemical properties of maize and potato starches

The molecular structure and physicochemical properties of acid–alcohol treated maize and potato starches (0.36% HCl in methanol at 25 °C for 1–15 days) were investigated. The yields of the modified starches were ranging from 91 to 100%. The average granule size of modified starches decreased slightly. The solubility of starches increased with the increase of treatment time, and the pasting properties confirmed the high solubility of modified starches. The gelatinization temperatures and range of gelatinization increased with the increase of treatment time except T_o (onset temperature) of maize starch. Molecular structures of modified starches suggested the degradation of starches occurred mostly within the first 5 days of treatment, and degradation rate of potato starch was higher than maize starch both in amylopectin and in amylose. Maize starch was found less susceptible to acid–alcohol degradation than potato starch.     

Pasting viscosity and in vitro digestibility of retrograded waxy and normal corn starch powders

Pasting viscosity and in vitro digestibility of oven-dried powders of waxy and normal corn starch gels (40% solids) retrograded under an isothermal (4 °C) or temperature cycled (4/30 °C) storage were investigated. Temperature cycling induced higher onset temperature for melting of amylopectin crystals than isothermal storage under a differential scanning calorimeter whereas little difference in crystalline type was observed under X-ray diffraction analysis. Temperature cycling caused higher pasting temperature and viscosity for the retrograded starches than isothermal storage. The retrograded waxy corn starch powders exhibited pasting behaviors similar to that of native waxy corn starch. However, the retrograded normal corn starch powders showed very much different pasting patterns with lower pasting viscosity but higher pasting temperature than native starch counterpart. The retrogradation increased slowly digestible starch content without changing resistant starch content, more effectively by the temperature cycling than the isothermal storage.     

Internal structure and physicochemical properties of corn starches as revealed by chemical surface gelatinization

The organization of amylose and amylopectin within starch granules is still not well elucidated. This study investigates the radial distribution of amylose and amylopectin in different corn starches varying in amylose content (waxy corn starch (WC), common corn starch (CC), and 50% and 70% amylose corn starches (AMC)). Corn starches were surface gelatinized by 13 M LiCl at room temperature to different extents (approximately 10%, 20%, 30%, and 40%). The gelatinized surface starch and remaining granules were characterized for amylose content, amylopectin chain-length distribution, thermal properties, swelling power (SP), and water solubility index (WSI). Except for the outmost 10% layer, the amylose content in CC increased slightly with increasing surface removal. In contrast, amylose was more concentrated at the periphery than at the core for 50% and 70% AMC. The proportion of amylopectin A chains generally decreased while that of B1 chains generally increased with increasing surface removal for all corn starches. The gelatinization enthalpy usually decreased, except for 70% AMC, whereas the retrogradation enthalpy relatively remained unchanged for CC but increased for WC, 50% and 70% AMC with increasing surface removal. The SP and WSI increased with increasing surface removal for all corn starches, with WC showing a significant increase in SP after the removal of the outmost 10% layer. The results of this study indicated that there were similarities and differences in the distribution of amylose and amylopectin chains along the radial location of corn starch granules with varying amylose contents. More amylose-lipid complex and amylopectin long chains were present at the periphery than at the core for amylose-containing corn starches.     

Development of waxy cassava with different Biological and physico-chemical characteristics of starches for industrial applications

The quality of cassava starch, an important trait in cassava breeding programs, determines its applications in various industries. For example, development of waxy (having a low level of amylose) cassava is in demand. Amylose is synthesized by granule-bound starch synthase I (GBSSI) in plants, and therefore, down-regulation of GBSSI expression in cassava might lead to reduced amylose content. We produced 63 transgenic cassava plant lines that express hair-pin dsRNAs homologous to the cassava GBSSI conserved region under the control of the vascular-specific promoter p54/1.0 from cassava (p54/1.0::GBSSI-RNAi) or cauliflower mosaic virus (CaMV) 35S (35S::GBSSI-RNAi). After the screening storage roots and starch granules from field-grown plants with iodine staining, the waxy phenotype was discovered: p54/1.0::GBSSI-RNAi line A8 and 35S::GBSSI-RNAi lines B9, B10, and B23. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that there was no detectable GBSSI protein in the starch granules of plants with the waxy phenotype. Further, the amylose content of transgenic starches was significantly reduced (<5%) compared with the level in starch granules from the wild-type (about 25%). The inner structure of the waxy starch granules differed from that of the untransformed ones, as revealed by transmission electron microscopy analysis as well as morphological changes in the iodine-starch complex. Endothermic enthalpy was reduced in waxy cassava starches, according to differential scanning calorimeter analysis. Except B9, all waxy starches displayed the A-type X-ray diffraction pattern. Amylogram patterns of the waxy cassava starches were analyzed using a rapid viscosity analyzer and found to have increased values for clarity, peak viscosity, gel breakdown, and swelling index. Setback, consistency, and solubility were notably reduced. Therefore, waxy cassava with novel starch in its storage roots was produced using the biotechnological approach, promoting its industrial utilization.     

The influence of amylose and amylopectin characteristics on gelatinization and retrogradation properties of different starches

Physico-chemical properties of starch from wheat, rye, barley (waxy, high-amylose and normal-amylose), waxy maize, pea and potato (normal-amylose and high-amylopectin) were studied. Emphasis was given to the amylose (total, apparent and lipid-complexed) and amylopectin characteristics as well as to the gelatinization and retrogradation properties measured using differential scanning calorimetry. The total amylose content varied from ca. 1 % for waxy maize to 37% for high-amylose barley. The amylopectin characteristics were determined by high-performance size-exclusion chromatography after debranching with isoamylase. The weight-average degree of polymerization ( _w) was 26, 33 and 27 for the A-, B-, and C-type starches, respectively. In general, the potato starches exhibited the highest retrogradation enthalpies and the cereal starches the lowest, while the pea starch showed an intermediate retrogradation enthalpy. The data were analysed by principal component analysis (PCA). The _w showed positive correlation to the melting interval, the peak minimum, the offset temperatures of the retrogradation-related endotherm as well as to the gelatinization and retrogradation enthalpies. However, the high-amylose barley retrograded to a greater extent than the other cereal starches, despite low _w (24). The amylose content was negatively correlated to the onset and the peak minimum temperatures of gelatinization.     

Effects of amylose/amylopectin ratio on starch-based superabsorbent polymers

Biodegradable superabsorbent polymers (SAPs) were prepared by grafting acrylamide onto starches then crosslinking with N,N′-methylene-bisacrylamide. This work focused on the effects of the amylose/amylopectin ratio of starches from the same source (corn) on the grafting reactions and performance of the resultant starch-based SAPs. To characterise each SAP, the acrylamide groups grafted onto the starch were detected by FTIR; grafting ratio and grafting efficiency were evaluated by a gravimetric method; and graft position and the length of the grafted segment were investigated by NMR. The relationships between the microstructures of the starches, and the graft reactions and performance of the SAPs were studied based on the amylose content in the starches. It was found that under the same reaction conditions, the grafting ratio and efficiency increased with increasing amylose content, which corresponds with water absorption ratio. NMR results indicated that the acrylamide group mainly grafted onto C6, and that the length of the grafted segment decreased with increasing amylopectin content in general, and in particular for waxy starch. The high molecular weight and branched structure of amylopectin reduced the mobility of the polymer chains and increased viscosity, which could explain the graft reactions and performance of the starch-based SAPs.     

Structural characteristics and physicochemical properties of oxidized corn starches varying in amylose content

The effects of amylose content on the extent of oxidation and the distribution of carboxyl groups in hypochlorite-oxidized corn starches were investigated. Corn starches including waxy corn starch (WC), common corn starch (CC), and 50% and 70% high-amylose corn starches (AMC) were oxidized with NaOCl at three concentrations (0.8%, 2%, and 5%). Carboxyl and carbonyl content of oxidized starches increased with increasing NaOCl concentration. High-AMC (70%) had slightly higher carboxyl and carbonyl contents at 0.8% NaOCl, whereas WC had significantly higher carboxyl and carbonyl contents at 2% and 5% NaOCl levels. Carbohydrate profiles by high-performance size-exclusion chromatography indicate that amylose was more susceptible to depolymerization than amylopectin. Degradation of amylopectin long chains (DP >24) was more pronounced in WC and CC than in AMCs. The crystalline lamellae of WC started to degrade at 2% NaOCl, but those of the other corn starches remained intact even at 5% NaOCl level according to X-ray crystallinity. By using anion-exchange chromatography for separation and size-exclusion chromatography for characterization, carboxyl groups were found to be more concentrated on amylopectin than on amylose, particularly in AMCs. Oxidation decreased gelatinization temperature and enthalpy with WC showing the most decrease and 70% AMC showing the least. The gelatinization enthalpy of 50% AMC decreased significantly faster than those of CC and 70% AMC after 0.8% oxidation. Retrogradation of amylopectin slightly increased after oxidation with increasing oxidation level. The peak viscosities of oxidized WC and CC were higher than those of their native counterparts at 0.8% NaOCl, but this increase was not observed in AMCs. The setback viscosities of 2% NaOCl-oxidized 50% and 70% AMCs were much higher than those of the unmodified counterparts. The extent of oxidation and physicochemical properties of oxidized starches varied greatly with the amylase:amylopectin ratio of corn starches. Amylose was suggested to play an important role in controlling the oxidation efficiency.     

The effects of amylose content on the molecular size of amylose, and on the distribution of amylopectin chain length in maize starches

The amylose to amylopectin ratios in six maize starch samples of differing amylose contents were measured by enzymatic debranching, followed by high performance size exclusion chromatography (HPSEC). The molecular size of amyloses, estimated by -log K_wav, shows progressive decrease with the increase in amylose content in maize starches. The gel permeation chromatographs of the corresponding amylopectins, debranched with isoamylase, showed bimodal distributions containing long and short chains. The average chain length of amylopectin has a correlation with amylose content. The correlation coefficients between amylose content and average chain length, long chain length, weight ratio and the mole ratio of long and short chain length, were 0.97, 0.92, 0.96, 0.94 respectively. The maize starch with the highest amylose content has the lowest amylose molecular size and the longest chains, with a high ratio of long to short chains in its amylopectin fraction. Comparing the values of amylose content determined by HPSEC of starch or debranched starch with those of the iodinecomplex method, we conclude that long chains of amylopectin in high amylose starches contribute significantly to apparent amylose content.     

New starches: Physicochemical properties of sweetsop (Annona squamosa) and soursop (Anonna muricata) starches

Starch from the fruits of sweetsop (Anonna squamosa) and soursop (Anonna muricata) were isolated and purified and the fat, ash, phosphorus and protein contents measured. The amount of amylose present was determined spectrophotometrically and found to be very similar (19%) for both starches. Scanning electron microscopy showed very small indented and spherical granules from both with an average granule size of 4.84 μm and 4.72 μm, respectively. The physicochemical properties, namely the swelling power, solubility, pasting characteristics, paste clarity and freeze–thaw stability were studied to assess the functionality of the starch pastes as hydrocolloids. The sweetsop starch showed higher swelling power and solubility compared to soursop starch and had a lower gelatinization temperature indicating a weaker granular structure. Sweetsop starch exhibited a lower pasting temperature, higher viscosity peak, higher viscosity breakdown and lower setback, higher paste clarity and freeze–thaw stability compared to soursop starch. The low gelatinization temperature and high freeze thaw stability of sweetsop starch are comparable to that of waxy corn. The properties of sweetsop indicate that it has potential for application as a thickener in frozen foods.     

Role of acetylation on metal induced precipitation of alginates

Acetylation dramatically effects both the solution properties and the metal induced precipitation of alginates. The presence of acetyl groups on both bacterial and seaweed alginate polymers marginally increased the weight average molecular weight (M_w) of each polymer by 7% and 11%, respectively. Acetylated bacterial alginate showed a significant increase in solution viscosity compared to its deacetylated counterpart. However microbial acetylation of seaweed alginate did not change its solution viscosity. Acetylation altered the calcium induced precipitation of both alginates. The presence of acetyl groups decreased the ability of each polymer to bind with calcium but increased their ability to bind with ferric Ion (Fe³⁺). By controlling the degree of acetylation on the alginate chains, it was possible to modify solution viscosity and cation induced precipitation of these polymers.     

Starches from different botanical sources I: Contribution of amylopectin fine structure to thermal properties and enzyme digestibility

Fifteen starches from different botanical sources were selected to study the influence of structural features on thermal properties and enzyme digestibility. Morphological appearance, X-ray diffraction pattern, apparent amylose content, unit-chain length distribution of amylopectin, thermal properties and enzyme digestibility of starch varied with botanical source. It was demonstrated that the distribution of unit-chains of amylopectin significantly correlated with functional properties of the starches. Gelatinization temperature of native and retrograded starches decreased and increased with a relative abundance of unit-chains with an approximate degree of polymerization (DP) of 8–12 and 16–26, respectively (P<0.01). Similar unit-chain lengths also affected the enzyme digestibility of starch granules (P<0.01).     

Studies on isolation and characterization of starch from oat (Avena nuda) grains

Starch from AC Hill oat grains (Avena nuda) was isolated and some of the characteristics determined. The yield of starch was 23·4% on a whole grain basis. The shape of the granule was polyhedral to irregular, with granules 6–10 μm in diameter. Lipids were extracted by acid hydrolysis and by selective solvent extraction with chloroform-methanol 2:1 v/v (CM) at ambient temperature, followed by n-propanol-water 3:1 v/v (PW) at 90–100°C. The acid hydrolyzed extracts which represented the total starch lipids (TSL) was 1·13%. The free lipids in the CM extract (1% TSL) was 6·2%, whereas the free and bound lipids in the PW extracts was 93.0%. Neutral lipids formed the major lipid class in the CM and PW extracts. The monoacyl lipid content in both CM and PW extracts was 61·0%. The total amylose content was 19·4%, of which 13·9% was complexed by native lipids. X-ray diffraction was of the ‘A’ type. Oat starch differed from wheat starch in showing a higher swelling factor, decreased amylose leaching, coleaching of a branched starch component and amylose during the pasting process, higher peak viscosity and set-back, low gel rigidity, greater susceptibility towards acid hydrolysis, greater resistance to -amylase action and a higher freeze-thaw stability. Furthermore, in comparison to wheat starch, the amylose chains of oat starch appear to be more loosely arranged in the amorphous regions, whereas in crystalline regions, oat starch chains are more compactly packed. Lipid removal from oat and wheat starches decreased their swelling factor, peak viscosity, set-back, gelatinization temperatures, freeze-thaw stability and paste clarity (at pH > 4·0), and increased their thermal stability, amylose leaching, enthalpy of gelatinization, susceptibility towards -amylase and paste clarity (at pH < 4·0). The results also showed that the properties of AC Hill oat starch is not representative of oat starch in general.     

Changes in morphological, thermal and pasting properties of yam (Dioscorea alata) starch during growth

This study was carried out in order to compare and establish the changes in physicochemical properties of starch from four different cultivars of yam at various stages of maturity during growth. The results showed that the starch content of the four yam tubers increased as growth progressed and were in the range of 70.5–85.3% on a dry basis. The shapes of the starch granules were round to oval or angular in the four yams and the size of starch granule increased with growth time ranging from 10 to 40 μm. The X-ray diffraction patterns could be classified as typical of B-type starch for the four cultivars of yam starch. The transition temperature of gelatinization of the four yam starches decreased during maturity. The RVA parameters suggested that yam starch paste showed a lower breakdown at an early harvest time. It appeared to be thermo-stable during heating but had a high setback after cooling, which might result in a tendency towards high retrogradation. The results for pasting behaviors showed that higher amylose content was associated with a lower pasting temperature and a higher peak viscosity in these starches.     

Locations of hypochlorite oxidation in corn starches varying in amylose content

The general oxidation mechanism by hypochlorite on starch has been well studied, but the information on the distribution of the oxidation sites within starch granules is limited. This study investigated the locations where the oxidation occurred within corn starch granules varying in amylose content, including waxy corn starch (WC), common corn starch (CC), and 50% and 70% high-amylose corn starch (AMC). Oxidized corn starches were surface gelatinized by 13 M LiCl at room temperature to different extents (approximately 10%, 20%, 30%, and 40%). The surface-gelatinized remaining granules were separated and studied for structural characteristics including carboxyl content, amylose content, amylopectin chain-length distribution, thermal properties, and swelling properties. Oxidation occurred mostly at the amorphous lamellae. More carboxyl groups were found at the periphery than at the core of starch granules, which was more pronounced in oxidized 70% AMC. More amylose depolymerization from oxidation occurred at the periphery of CC. For WC and CC, amylopectin long chains (>DP 36) were more prone to depolymerization by oxidation. The gelatinization properties as measured by differential scanning calorimetry also supported the changes in amylopectin fine structure from oxidation. Oxidized starches swelled to a greater extent than their unmodified counterparts at all levels of surface removal. This study demonstrates that the locations of oxidation and physicochemical properties of oxidized starches are affected by the molecular arrangement within starch granules.     

Effect of γ-irradiation on pasting and emulsification properties of octenyl succinylated rice starches

Octenylsuccinylated (OS) starches from waxy rice or high-amylose rice (28.1% amylose) (DS 0.023 and 0.025, respectively) were gamma-irradiated at 10, 30, or 50kGy and their pasting and thermal properties, crystallinity, and emulsification property were examined. When the OS starches were irradiated, the degrees of substitution gradually decreased as irradiation dose increased. A significant decrease in pasting viscosity was observed with an increase in irradiation dose, indicating the presence of chain degradation induced by the radiation. The melting temperature and enthalpy determined by differential scanning calorimetry increased slightly by irradiating at 10 or 30kGy. Little change in crystallinity was observed in the X-ray diffraction analysis for the OS high-amylose rice starch regardless of irradiation doses, whereas a decrease in crystallinity was observed with the OS waxy starch irradiated at 50kGy. Chain degradation induced by irradiation occurred mainly in the amorphous regions, but some loss of crystallinity occurred when the irradiation was excessive. The OS starches showed greater emulsion capacity and stability than the native counterparts due to their amphipathic nature. The irradiation further improved the emulsification properties of OS starches. The irradiation at 10kGy was optimal, and treating at higher doses decreased the emulsion capacity and stability of the OS starches.     

Physicochemical properties and structure of large, medium and small granule starches in fractions of normal barley endosperm

Normal barley grain was milled to flour with a machine used to polish brewers' rice from the surface layer to the center. Large (18.4 microm, median size), medium (12.3 microm) and small (2.2 microm) granule starches were isolated from classified flours. Their physicochemical properties and fine structure were investigated. The percentage (w%) of large granules decreased from the surface layer to the center, while the amounts of medium and small granules increased. Although all the starch granules were an A-type crystal, the relative crystallinity varied from 22.0 to 27.4%. The DPn of the amyloses was around 1600 and similar for all the samples. But the amylose content of the starches varied from 21.9 to 26.4%. Also, the amylopectins showed differences in DPn (around 5700-7900) and chain-length distribution between granule size or fractions. The transition temperature ranges and the enthalpy values of the starch granules differed with granule size. The gelatinization properties showed no correlation with any of the parameters, except the enthalpy value and relative crystallinity (gamma = +0.73). The findings suggested that the structural characteristics of the starches in classified flours of normal barley differed essentially from those of waxy barley.     

Amylose content and chemical modification effects on thermoplastic starch from maize – Processing and characterisation using conventional polymer equipment

A design of experiments was performed on extruded starch based materials studied in a recently published article [Chaudhary, A. L., Miler, M., Torley, P. J., Sopade, P. A., & Halley, P. J. (2008). Amylose content and chemical modification effects on the extrusion of thermoplastic starch from maize. Carbohydrate Polymers, 74(4), 907–913] highlighting the effects of amylose content, chemical modification and extrusion on a range of maize starches. An investigation into the effects of starch type (unmodified 0–80% amylose starch; hydroxypropylated 80% amylose starch), screw speed and ageing after moulding on final product properties such as mechanical properties (Young’s modulus, maximum stress and strain at break), moisture absorption, morphology and retrogradation are included. A full factorial design was used to study these starch type, processing and final product property relationships. Microscopy was used to observe any morphological difference between the various starch types in thermoplastic starch (TPS) blends and X-ray diffraction (XRD) was used to observe changes in crystallinity over time (retrogradation). The results show that 0% amylose (waxy maize) and hydroxypropylated 80% amylose thermoplastic starches have mechanical properties comparable to that of low density polyethylene (LDPE) and high density polyethylene (HDPE), therefore these materials have the potential to be an environmentally friendly alternative to current polymer resins.     

Effects of Ca- and Na-lignosulfonate on starch gelatinization and network formation

The interaction of lignosulfonates with starches was examined by microscopy and viscosity measurements. 8% starch dispersions with Ca- or Na-lignosulfonate, or with only Ca²⁺ or Na⁺, were heated to 97 °C and cooled to 50 °C in a Brabender Viscograph, the gelatinization was followed by light microscopy and image analysis, and the gel network formed after cooling to 4 °C was studied under the transmission electron microscope.

The lignosulfonates (2%) delayed the initial granule swelling in all starches (native maize, waxy maize and waxy barley). The presence of ions enhanced amylose leakage resulting in lower peak viscosity. The viscosity during cooling increased more with Ca-LS than with Na-LS. With a low lignosulfonate concentration the network formed after cooling was homogeneous with fine strands. With Na-lignosulfonate, as well as with Na⁺, the network connectivity deteriorated and spherical aggregates formed. Ca-lignosulfonate induced a network with thick strands, but with Ca²⁺ the strands became thinner.     

Ultra high pressure (UHP)-assisted acetylation of corn starch

Potential roles of ultra high pressure (UHP) in starch granule reactivity and properties of acetylated starch were investigated. Corn starch was substituted with acetic anhydride at pressure range of 0.1–400 MPa for 15 min; also, conventional reaction (30 °C, 60 min) was conducted as reaction control. Native and acetylated corn starches were assessed with respect to degree of substitution (DS), X-ray diffraction pattern/relative crystallinity, starch solubility/swelling power, gelatinization, and pasting behavior. For the UHP-assisted acetylated starches, DS values increased along with increasing pressure levels from 200 to 400 MPa, and reaction at 400 MPa exhibited maximum reactivity (though lower than the DS value of the reaction control). Both UHP-assisted and conventional acetylation of starch likely occurred predominantly at amorphous regions within granules. Gelatinization and pasting properties of the UHP-assisted acetylated starches may be less influenced by UHP treatment in acetylation reaction, though restricted starch solubility/swelling were observed.