A gene cluster encoding plantaricin 1.25beta and other bacteriocin-like peptides in Lactobacillus plantarum TMW1.25

Plantaricin 1.25beta is a thermostable class two bacteriocin produced by Lactobacillus plantarum TMW1.25 isolated from sausage fermentation. It is co-produced with several other bacteriocin-like peptides. Using oligonucleotides derived from previously determined peptide sequences, a 3.8 kb DNA fragment could be amplified. A neighboring 1.8 kb fragment was amplified using ligation-anchored single-specific-primer PCR. Sequencing of the complete 5.6 kb stretch revealed that the structural gene for plantaricin 1.25beta, plnB, was located downstream of another bacteriocin gene, plnC. Seven other open reading frames were detected, including plnK encoding a bacteriocin-like peptide, but not including any putative immunity genes. Interestingly, the gene cluster contained an IS30-like insertion sequence, designated IS125, as well as an ISS1 homolog.     

Purification and characterization of plantaricin LR14: a novel bacteriocin produced by <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> LR/14

Bacteriocin produced by Lactobacillus plantarum strain LR/14 was purified to homogeneity by a multi-step protocol consisting of ammonium sulfate precipitation, cation-exchange chromatography, gel-filtration, and reverse-phase FPLC. L. plantarum LR/14 secreted a low-molecular-weight bacteriocin consisting of two peptides designated as plantaricin LR14alpha and -beta with molecular mass of 3,012.46 and 5,605.74 Da, respectively. The purified peptides were characterized to be highly thermostable and active in acidic pH range, with a pI of >10.0. Both alpha and beta peptides showed bactericidal mode of action against indicator strain, Micrococcus luteus and together showed a synergistic action. These peptides were differentially sensitive to a range of proteolytic enzymes, indicating differences in their composition. Amino acid sequencing revealed that the N-terminus in both the cases is blocked; thus, only a partial sequence could be obtained after CNBr digestion. These sequences, when compared with those available in the database, showed no homology with known bacteriocins, indicating it to be a novel compound.     

Purification and genetic characterization of plantaricin NC8, a novel coculture-inducible two-peptide bacteriocin from Lactobacillus plantarum NC8

A new, coculture-inducible two-peptide bacteriocin named plantaricin NC8 (PLNC8) was isolated from Lactobacillus plantarum NC8 cultures which had been induced with Lactococcus lactis MG1363 or Pediococcus pentosaceus FBB63. This bacteriocin consists of two distinct peptides, named alpha and beta, which were separated by C(2)-C(18) reverse-phase chromatography and whose complementary action is necessary for full plantaricin NC8 activity. N-terminal sequencing of both purified peptides showed 28 and 34 amino acids residues for PLNC8 alpha and PLNC8 beta, respectively, which showed no sequence similarity to other known bacteriocins. Mass spectrometry analysis showed molecular masses of 3,587 Da (alpha) and 4,000 Da (beta). The corresponding genes, designated plNC8A and plNC8B, were sequenced, and their nucleotide sequences revealed that both peptides are produced as bacteriocin precursors of 47 and 55 amino acids, respectively, which include N-terminal leader sequences of the double-glycine type. The mature alpha and beta peptides contain 29 and 34 amino acids, respectively. An open reading frame, orfC, which encodes a putative immunity protein was found downstream of plNC8B and overlapping plNC8A. Upstream of the putative -35 region of plNC8B, two direct repeats of 9 bp were identified, which agrees with the consensus sequence and structure of promoters of class II bacteriocin operons whose expression is dependent on an autoinduction mechanism.     

Identification and nucleotide sequence of genes involved in the synthesis of lactocin 705, a two-peptide bacteriocin from Lactobacillus casei CRL 705

The structural gene determinants of lactocin 705, a bacteriocin produced by Lactobacillus casei CRL 705, have been amplified from a plasmid of approximately 35 kb and sequenced. Lactocin 705 is a class IIb bacteriocin, whose activity depends upon the complementation of two peptides (705alpha and 705beta) of 33 amino acid residues each. These peptides are synthesized as precursors with signal sequences of the double-glycine type, which exhibited high identities with the leader peptides of plantaricin S and J from Lactobacillus plantarum, brochocin C from Brochotrix campestris, sakacin P from Lactobacillus sake, and the competence stimulating peptides from Streptococcus gordonii and Streptococcus mitis. However, the two mature bacteriocins 705alpha and 705beta do not show significant similarity to other sequences in the databases.     

Purification and amino acid sequence of a bacteriocin produced by Pediococcus acidilactici.

A bacteriocin produced by Pediococcus acidilactici has been purified to homogeneity by a rapid and simple four-step purification procedure which includes ammonium sulphate precipitation, chromatography with a cation-exchanger and Octyl Sepharose, and reverse-phase chromatography. The purification resulted in an approximately 80,000-fold increase in the specific activity and about a 6-fold increase in the total activity. The amino acid composition and sequencing data indicated that the bacteriocin contained 43-44 amino acid residues. The predicted M(r) and isolectric point of the bacteriocin are about 4600 and 8.6, respectively. Comparing the amino acid sequence of this bacteriocin with the sequences of leucocin A-UAL 187, sakacin P and curvacin A (bacteriocins produced by Leuconostoc gelidum, Lactobacillus sake and Lactobacillus curvatus, respectively) revealed that all four bacteriocins had in their N-terminal region the sequence Tyr-Gly-Asn-Gly-Val-Xaa-Cys, indicating that this concensus sequence is of fundamental importance for this group of bacteriocins. The bacteriocin from P. acidilactici and sakacin P were very similar, having at least 25 common amino acid residues. The sequence similarity was greatest in the N-terminal half of the molecules--17 of the first 19 residues were common--indicating the fundamental importance of this region. Leucocin A-UAL 187 and curvacin A had, respectively, at least 16 and 13 amino acid residues in common with the bacteriocin from P. acidilactici.     

Purification and partial amino acid sequence of plantaricin S, a bacteriocin produced by Lactobacillus plantarum LPCO10, the activity of which depends on the complementary action of two peptides.

Plantaricin S, one of the two bacteriocins produced by Lactobacillus plantarum LPCO10, which was isolated from a green-olive fermentation (R. Jiménez-Díaz, R.M. Ríos-Sánchez, M. Desmazeaud, J.L.Ruiz-Barba, and J.-C. Piard, Appl. Environ. Microbiol. 59:1416-1424, 1993), has been purified to homogeneity by ammonium sulfate precipitation, by binding to SP-Sepharose fast-flow, phenyl-Sepharose CL-4B, and C2/C18 reverse-phase chromatographies. The purification resulted in a final yield of 91.6% and a 352,617-fold increase in the specific activity. The bacteriocin activity was associated with two distinct peptides, termed alpha and beta, which were separated by C2/C18 reverse-phase chromatography. Although beta alone appeared to retain a trace of inhibitory activity, the complementary action of both the alpha and beta peptides was required for full bacteriocin activity, as judged by both the agar well diffusion and the microtiter plate assays. From the N-terminal end, 26 and 24 amino acids residues of alpha and beta, respectively, were sequenced. Further attempts at sequencing revealed no additional amino acids residues, suggesting that either modifications in the next amino acid residue blocked the sequencing region or that the C-terminal end had been reached. The amino acid sequences of alpha and beta show no apparent homology to each or to other bacteriocins purified from lactic acid bacteria.     

Purification and Characterization of Plantaricin ZJ5, a New Bacteriocin Produced by Lactobacillus plantarum ZJ5

The aim of this study is to investigate the antimicrobial potential of Lactobacillus plantarum ZJ5, a strain isolated from fermented mustard with a broad range of inhibitory activity against both Gram-positive and Gram-negative bacteria. Here we present the peptide plantaricin ZJ5 (PZJ5), which is an extreme pH and heat-stable. However, it can be digested by pepsin and proteinase K. This peptide has strong activity against Staphylococcus aureus. PZJ5 has been purified using a multi-step process, including ammonium sulfate precipitation, cation-exchange chromatography, hydrophobic interactions and reverse-phase chromatography. The molecular mass of the peptide was found to be 2572.9 Da using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The primary structure of this peptide was determined using amino acid sequencing and DNA sequencing, and these analyses revealed that the DNA sequence translated as a 44-residue precursor containing a 22-amino-acid N-terminal extension that was of the double-glycine type. The bacteriocin sequence exhibited no homology with known bacteriocins when compared with those available in the database, indicating that it was a new class IId bacteriocin. PZJ5 from a food-borne strain may be useful as a promising probiotic candidate.     

Expression of the immunity protein of plantaricin 423, produced by Lactobacillus plantarum 423, and analysis of the plasmid encoding the bacteriocin

Plantaricin 423 is a class IIa bacteriocin produced by Lactobacillus plantarum isolated from sorghum beer. It has been previously determined that plantaricin 423 is encoded by a plasmid designated pPLA4, which is now completely sequenced. The plantaricin 423 operon shares high sequence similarity with the operons of coagulin, pediocin PA-1, and pediocin AcH, with small differences in the DNA sequence encoding the mature bacteriocin peptide and the immunity protein. Apart from the bacteriocin operon, no significant sequence similarity could be detected between the DNA or translated sequence of pPLA4 and the available DNA or translated sequences of the plasmids encoding pediocin AcH, pediocin PA-1, and coagulin, possibly indicating a different origin. In addition to the bacteriocin operon, sequence analysis of pPLA4 revealed the presence of two open reading frames (ORFs). ORF1 encodes a putative mobilization (Mob) protein that is homologous to the pMV158 superfamily of mobilization proteins. Highest sequence similarity occurred between this protein and the Mob protein of L. plantarum NCDO 1088. ORF2 encodes a putative replication protein that revealed low sequence similarity to replication proteins of plasmids pLME300 from Lactobacillus fermentum and pYIT356 from Lactobacillus casei. The immunity protein of plantaricin 423 contains 109 amino acids. Although plantaricin 423 shares high sequence similarity with the pediocin PA-1 operon, no cross-reactivity was recorded between the immunity proteins of plantaricin 423 and pediocin PA-1.     

Divergicin 750, a novel bacteriocin produced by Carnobacterium divergens 750

Abstract Divergicin 750, a bacteriocin produced by Carnobacterium divergens 750, preferentially inhibited the growth of strains of Carnobacterium and Enterococcus . Selected strains of Listeria monocytogenes and Clostridium perfringens were also inhibited. The bacteriocin was purified to homogeneity by ammonium sulfate precipitation and sequential S-Sepharose, hydrophobic interaction and reversed phase chromatography. The complete amino acid sequence was determined by Edman degradation. The peptide consisted of 34 amino acid residues. The calculated ifM_r from the peptide sequence, 3447.7, agreed well with that obtained by mass spectrometry. Divergicin 750 did not show any sequence similarities to other known bacteriocins. The plasmid-located structural gene encoding divergicin 750 ( dvn750 ) was cloned and sequenced. The gene encoded a primary translation product of 63 amino acids with a deduced M _rmr = 6789.4 which is cleaved between amino acid residues 29 and 30 to yield the mature bacteriocin.     

Pre-treatment of growth medium with Amberlite® XAD-1180 produces higher levels of bacteriocin plantaricin 423

In this paper, we investigated the production of plantaricin 423, produced by Lactobacillus plantarum 423 in both MRS broth and partially deproteinated MRS with Amberlite XAD-1180. Improved production of plantaricin 423 was observed in MRS broth pre-treated with Amberlite XAD-1180. Precipitation of plantaricin with ammonium sulphate, followed by gel filtration chromatography and subsequent analysis on a modified tricine-SDS PAGE, significantly increased the yield and purity of plantaricin 423. This paper describes a novel method to partially deproteinate growth medium in order to facilitate bacteriocin purification.     

Characterization and purification of a new bacteriocin with a broad inhibitory spectrum produced by Lactobacillus plantarum lp 31 strain isolated from dry-fermented sausage

Aims:  Characterization and purification of a new bacteriocin produced by Lactobacillus plantarum LP 31 strain, isolated from Argentinian dry-fermented sausage.
Methods and Results:  Lactobacillus plantarum LP 31 strain produces an antimicrobial compound that inhibits the growth of food-borne pathogenic bacteria. It was inactivated by proteolytic enzymes, was stable to heat and catalase and exhibited maximum activity in the pH range from 5·0 to 6·0. Consequently, it was characterized as a bacteriocin. It was purified by RP (reverse-phase) solid-phase extraction, gel filtration chromatography and RP-HPLC. Plantaricin produced by Lact. plantarum LP 31 is a peptide with a molecular weight of 1558·85 Da as determined by Maldi-Tof mass spectrometry and contains 14 amino acid residues. It was shown to have a bactericidal effect against Pseudomonas sp., Staphylococcus aureus , Bacillus cereus and Listeria monocytogenes.
Conclusions:  The bacteriocin produced by Lact. plantarum LP 31 may be considered as a new plantaricin according to its low molecular weight and particular amino acid composition.
Significance and Impact of the Study:  In view of the interesting inhibitory spectrum of this bacteriocin and because of its good technological properties (resistance to heat and activity at acidic pH), this bacteriocin has potential applications as a biopreservative to prevent the growth of food-borne pathogens and food spoilage bacteria in certain food products.     

Purification and partial amino acid sequence of curvaticin FS47, a heat-stable bacteriocin produced by Lactobacillus curvatus FS47.

Curvaticin FS47, a bacteriocin produced by Lactobacillus curvatus FS47, is inhibitory to Listeria monocytogenes, as well as Lactobacillus, Pediococcus, Enterococcus, and Bacillus spp. The bacteriocin was purified by 40% ammonium sulfate precipitation, solid-phase extraction, and reversed-phase high-pressure liquid chromatography. Purified curvaticin FS47 was determined to be 4.07 kDa by mass spectrometry and was partially sequenced. Thirty-one N-terminal amino acids were identified; the curvaticin FS47 protein sequence did not show homology to the pediocin-like group of bacteriocins.     

Solution structure of plantaricin C, a novel lantibiotic.

Plantaricin C, a bacteriocin produced by a Lactobacillus plantarum strain of dairy origin, is a lantibiotic. One dehydroalanine, one lanthionine and three beta-methyl-lanthionine residues were found in its 27 amino acid sequence. The plantaricin C structure has two parts: the first comprises the six NH2-terminal residues, four of which are lysines, which confer a strong positive charge to this stretch. The amino acids in positions 7 and 27 form the lanthionine bridge, giving a globular conformation to the rest of the molecule. The beta-methyl-lanthionine bridges are established between residues 12-15, 13-18 and 23-26. This central region has a charge distribution compatible with an amphipathic alpha-helix, through which plantaricin C would become inserted into the membrane matrix of sensitive organisms, provoking the opening of pores and leakage of the cytoplasmic content.     

Purification and amino acid sequence of sakacin A, a bacteriocin from Lactobacillus sake Lb706.

Sakacin A, a bacteriocin produced by Lactobacillus sake Lb706 and which inhibits the growth of Listeria monocytogenes, was purified to homogeneity by ammonium sulphate precipitation and ion-exchange, hydrophobic-interaction and reversed-phase chromatography. The complete amino acid sequence of sakacin A was determined by Edman degradation. The bacteriocin consisted of 41 amino acid residues and had a calculated M(r) of 4308.7, which is in good agreement with the value determined by mass spectrometry. The structural gene encoding sakacin A (sakA) was cloned and sequenced. The gene encoded a primary translation product of 59 amino acid residues which was cleaved between amino acids 18 and 19 to yield the active sakacin A. Sakacin A shared some sequence similarities with other bacteriocins.     

Isolation and partial characterization of a bacteriocin produced by Lactobacillus plantarum BM‐1 isolated from a traditionally fermented Chinese meat product

Lactobacillus plantarum BM‐1 isolated from a traditionally fermented Chinese meat product was found to produce a novel bacteriocin that is active against a wide range of gram‐positive and gram‐negative bacteria. Production of the bacteriocin BM‐1 started early in the exponential phase and its maximum activity (5120 AU/mL) was recorded early during the stationary phase (16 hr). Bacteriocin BM‐1 is sensitive to proteolytic enzymes but stable in the pH range of 2.0–10.0 and heat‐resistant (15 min at 121°C). This bacteriocin was purified through pH‐mediated cell adsorption–desorption and cation‐exchange chromatography on an SP Sepharose Fast Flow column. The molecular weight of the purified bacteriocin BM‐1 was determined to be 4638.142 Da by electrospray ionization Fourier transform mass spectrometry. Furthermore, the N‐terminal amino acid sequence was obtained through automated Edman degradation and found to comprise the following 15 amino acid residues: H₂N‐Lys‐Tyr‐Tyr‐Gly‐Asn‐Gly‐Val‐Tyr‐Val‐Gly‐Lys‐His‐Ser‐Cys‐Ser. Comparison of this sequence with that of other bacteriocins revealed that bacteriocin BM‐1 contains the consensus YGNGV amino acid motif near the N‐terminus. Based on its physicochemical characteristics, molecular weight, and N‐terminal amino acid sequence, plantaricin BM‐1 is a novel class IIa bacteriocin.     

Purification and cloning of sakacin 674, a bacteriocin from Lactobacillus sake Lb674

Abstract Sakacin 674, a bacteriocin produced by Lactobacillus sake Lb764 and which inhibits the growth of Listeria monocytogenes , was purified to homogeneity by ammonium sulphate precipitation and sequential ion exchange, hydrophobic interaction and reversed phase chromatography. The complete amino acid sequence of sakacin 674 was determined by Edman degradation. The bacteriocin consisted of 43 amino acid residues and had a calculated molecular mass of 4436.6 Da, which is in good agreement with the molecular mass of 4437.2 as determined by mass spectrometry. The structural gene encoding sakacin 674 ( sakR ) was located on the chromosome. This gene was cloned and sequenced. It encoded a primary translation product of 61 amino acid residues which was cleaved between amino acids 18 and 19 to yield the active sakacin 674. Sakacin 674 resembled other known bacteriocins and was very similar to sakacin P.     

Detection, purification, and partial characterization of plantaricin C, a bacteriocin produced by a Lactobacillus plantarum strain of dairy origin.

A bacteriocin produced by Lactobacillus plantarum LL441 was selected from the inhibitory products of 75 mesophilic lactobacilli because of its potency and broad spectrum. It is a peptide of 3.5 kDa whose amino-terminal sequence is NH2-K-K-T-K-K-N-X-S-G-D-I-. It is bactericidal and, in some cases, bacteriolytic. The peptide, called plantaricin C, retained its activity after boiling, storage, and treatment at different pHs.     

Characterization of the amylovorin locus of Lactobacillus amylovorus DCE 471, producer of a bacteriocin active against Pseudomonas aeruginosa, in combination with colistin and pyocins

Lactobacillus amylovorus DCE 471 produces amylovorin L, a bacteriocin with an antibacterial activity against some strains of the Lactobacillus lineage. Based on the sequence of one active peptide, a gene encoding active amylovorin L was cloned and sequenced. Genome walking allowed us to sequence a larger fragment of 7577 bp of genomic DNA, with 12 predicted ORFs. The previously characterized amylovorin L peptide-encoding gene is preceded by another gene encoding a small polypeptide with a typical bacteriocin-processing double-glycine site, suggesting that amylovorin L is a two-component class IIb bacteriocin (amylovorin Lalpha/beta). Lalpha and Lbeta show the highest similarity to gassericin T from Lactobacillus gasseri SBT2055 and BlpN from Streptococcus pneumoniae R6, respectively, and to LafA and LafX, which form the lactacin F bacteriocin of Lactobacillus johnsonii NCC 533. As for other lactic acid bacteria bacteriocins, amylovorin L showed no activity against the Gram-negative opportunistic pathogen Pseudomonas aeruginosa on its own, but showed synergistic inhibitory activity when used in combination with the peptide antibiotic colistin, and, remarkably, with the P. aeruginosa soluble bacteriocins, pyocins S1 and S2.