Comparison of quasisteady-state performance of the DEAMOX process under intermittent and continuous feeding and different nitrogen loading rates

The recently developed denitrifying ammonium oxidation (DEAMOX) process combines the anammox reaction with autotrophic denitrifying conditions using sulfide as an electron donor for the production of nitrite from nitrate within an anaerobic biofilm. This paper compares a quasisteady-state performance of this process for treatment of baker's yeast wastewater under intermittent and continuous feeding and increasing nitrogen loading rate (NLR) from 300 till 858 mg N/L/d. The average total nitrogen removal slightly decreased on increasing the NLR: from 86 to 79% (intermittent feeding) and from 87 to 84% (continuous feeding). The better performance under continuous feeding was due to a more complete nitrate removal in the former case whereas the ammonia removal was similar for both feeding regimes under the comparable NLR. A possible explanation can be that, during continuous feeding (simultaneous supply of nitrate and sulfide), there were less mass transfer limitations for sulfide oxidizing denitrifiers presumably located in the outer layer of sludge aggregates. On the contrary, the ammonia oxidisers presumably located inside the aggregates apparently suffered from nitrite mass transfer limitations under both the feedings. The paper further describes some characteristics of the DEAMOX sludge.     

ANAMMOX process start up and stabilization with an anaerobic seed in Anaerobic Membrane Bioreactor (AnMBR)

ANaerobic AMMonium OXidation (ANAMMOX) process, an advanced biological nitrogen removal alternative to traditional nitrification--denitrification removes ammonia using nitrite as the electron acceptor without oxygen. The feasibility of enriching anammox bacteria from anaerobic seed culture to start up an Anaerobic Membrane Bioreactor (AnMBR) for N-removal is reported in this paper. The Anammox activity was established in the AnMBR with anaerobic digester seed culture from a Sewage Treatment Plant in batch mode with recirculation followed by semi continuous process and continuous modes of operation. The AnMBR performance under varying Nitrogen Loading Rates (NLR) and HRTs is reported for a year, in terms of nitrogen transformations to ammoniacal nitrogen, nitrite and nitrate along with hydrazine and hydroxylamine. Interestingly ANAMMOX process was evident from simultaneous Amm-N and nitrite reduction, consistent nitrate production, hydrazine and hydroxylamine presence, notable organic load reduction and bicarbonate consumption.     

Optimizations of sulphide and organic modifications of the DEAMOX process

Effect of various operational parameters (pH, bicarbonate concentration, and temperature) on the efficiency of the S- and O-modifications of the DEAMOX process was studied. It was demonstrated that the optimum pH values for the S- and O-DEAMOX processes are 7.5 ± 0.05 and 8.1 ± 0.08, respectively. The optimum bicarbonate concentration for both modifications does not exceed 24 mM. The optimum temperature for the S-DEAMOX process is 35°C, and any deviation from this value has a significant impact on this process. For the O-DEAMOX process, the optimum temperature range is 25–35°C.     

Effect of stabilization on biomass activity

The study aimed to compare aerobic and aerobic/anoxic stabilization processes in terms of organic matter and the biomass removal efficiencies using a municipal sludge sample. The efficiency of stabilization process was assessed monitoring suspended solids (SS), volatile suspended solids (VSS), total and dissolved organic carbon (TOC, DOC), nitrate, nitrite, and phosphate parameters. The oxygen uptake rate (OUR) measurements were conducted to determine active biomass concentration. On the 30th day of the aerobic stabilization, the SS, VSS and TOC removal efficiencies were 22%, 28% and 55%, respectively. Under aerobic/anoxic conditions, removal efficiencies for SS, VSS and TOC were 25%, 27% and 67%. On the 17th day of the stabilization, SS and VSS removal rates were 60 mg SS/L day and 47 mg VSS/L day for aerobic and 102 mg SS/L day and 63 mg VSS/L day for aerobic/anoxic conditions, respectively. These findings reflected the higher stabilization performance of the aerobic/anoxic conditions. Based on respirometric results, the ratios of the active biomass were decreased to 30% and 24% for the 17th and 30th day of the aerobic stabilization, respectively. Such results have significant implications relative to the activity decrease quantification of the biomass as well as its further application potentials after aerobic or aerobic/anoxic sludge stabilization.     

Fast start-up, performance and microbial community in a pilot-scale anammox reactor seeded with exotic mature granules

The possibility to introduce the exotic anammox sludge to seed the pilot-scale anammox granular reactor and its fast start-up for treating high nitrogen concentration wastewater were evaluated in this study. The reactor was started up successfully in two weeks; in addition, high nitrogen removal was achieved for a long period. Stoichiometry molar ratios of nitrite conversion and nitrate production to ammonium conversion were calculated to be 1.26 ± 0.02:1 and 0.26 ± 0.01:1, respectively. The Stover-Kincannon model which was first applied in granular anammox process indicated that the granular anammox reactor possessed high nitrogen removal potential of 27.8 kg/m³/d. The anammox granules in the reactor were characterized via microscope observation and fluorescence in situ hybridization technique. Moreover, the microbial community of the granules was quantified to be composed of 91.4-92.4% anammox bacteria by real-time polymerase chain reaction. This pilot study can elucidate further information for industrial granular anammox application.     

Nitrogen removal performance of a hybrid anammox reactor

The anaerobic ammonium oxidation (anammox) process has attracted considerable attention in recent years as an alternative to conventional nitrogen removal technologies. In this study, an innovative hybrid reactor combining fluidized and fixed beds for anammox treatment was developed. The fluidized bed was mechanically stirred and the gaseous product could be rapidly released from the anammox sludge to prevent washout of the sludge caused by floatation. The fixed bed comprising a non-woven biomass carrier could efficiently catch sludge to reduce washout. During the operation, nitrogen loading rates to the reactor were increased to 27.3 kg N/m³/d, with total nitrogen removal efficiencies of 75%. The biomass concentration in the fluidized bed reached 26-g VSS/L. Anammox granules were observed in the reactors, with settling velocities and sludge volumetric index of 27.3 ± 6.5 m/h and 23 mL/g, respectively. Quantification of extracellular polymeric substances revealed the anammox granules contained a significant amount of extracellular proteins.     

High-rate nitrogen removal from livestock manure digester liquor by combined partial nitritation–anammox process

In this study, combination of a partial nitritation reactor, using immobilized polyethylene glycol (PEG) gel carriers, and a continuous stirred granular anammox reactor was investigated for nitrogen removal from livestock manure digester liquor. Successful nitrite accumulation in the partial nitritation reactor was observed as the nitrite production rate reached 2.1 kg-N/m³/day under aerobic nitrogen loading rate of 3.8 kg-N/m³/day. Simultaneously, relatively high free ammonia concentrations (average 50 mg-NH₃/l) depressed the activity of nitrite oxidizing bacteria with nitrate concentration never exceeding 3% of TN concentration in the effluent of the partial nitritation reactor (maximum 35.2 mg/l). High nitrogen removal rates were achieved in the granular anammox reactor with the highest removal rate being 3.12 kg-N/m³/day under anaerobic nitrogen loading rate of 4.1 kg-N/m³/day. Recalcitrant organic compounds in the digester liquor did not impair anammox reaction and the SS accumulation in the granular anammox reactor was minimal. The results of this study demonstrated that partial nitritation–anammox combination has the potential to successfully remove nitrogen from livestock manure digester liquor.     

Ammonium removal performance of anaerobic ammonium-oxidizing bacteria immobilized in polyethylene glycol gel carrier

Anaerobic ammonium-oxidizing (anammox) bacteria were immobilized in polyethylene glycol gel carriers. A small amount of seed sludge [0.24% (w/v)] was entrapped in the carriers, and continuous feeding tests were performed. Nitrogen removal activity increased gradually, reaching 3.7 kg N/m(3) reactor per day on day 67. The average of nitrogen conversion rate was calculated as 3.4 kg N/m(3) reactor per day. Microscopic examination clearly showed that small red clusters formed in the gel carrier. Moreover, fluorescence in situ hybridization analysis revealed that these clusters consisted of anammox bacteria. From real-time polymerase chain reaction analysis, the growth of anammox bacteria in the gel carriers was clearly shown by increased concentration of 16S rRNA gene of planctomycete from 4.3 x 10(8) to 4.2 x 10(9) copies/ml between days 41 and 55. To determine the effects of inoculation on the start-up of the reactor, the amount of seed sludge in the gel carrier was varied and it was found that the start-up period could be reduced to as little as 25 days when a sludge concentration of 1.4% (w/v) was used. This is the first report of successful immobilization and cultivation of anammox bacteria in a gel carrier.     

Biological treatment of ammonium-rich wastewater by partial nitritation and subsequent anaerobic ammonium oxidation (anammox) in a pilot plant

In wastewater treatment plants with anaerobic sludge digestion, 15-20% of the nitrogen load is recirculated to the main stream with the return liquors from dewatering. Separate treatment of this ammonium-rich digester supernatant would significantly reduce the nitrogen load of the activated sludge system. Some years ago, a novel biological process was discovered in which ammonium is converted to nitrogen gas under anoxic conditions with nitrite as the electron acceptor (anaerobic ammonium oxidation, anammox). Compared to conventional nitrification and denitrification, the aeration and carbon-source demand is reduced by over 50 and 100%, respectively. The combination of partial nitritation to produce nitrite in a first step and subsequent anaerobic ammonium oxidation in a second reactor was successfully tested on a pilot scale (3.6 m(3)) for over half a year. This report focuses on the feasibility of nitrogen removal from digester effluents from two different wastewater treatment plants (WWTPs) with the combined partial nitritation/anammox process. Nitritation was performed in a continuously stirred tank reactor (V=2.0 m(3)) without sludge retention. Some 58% of the ammonium in the supernatant was converted to nitrite. At 30 degrees C the maximum dilution rate D(x) was 0.85 d(-1), resulting in nitrite production of 0.35 kg NO(2)-N m(-3)(reactor) d(-1). The nitrate production was marginal. The anaerobic ammonium oxidation was carried out in a sequencing batch reactor (SBR, V=1.6 m(3)) with a nitrogen elimination rate of 2.4 kg N m(-3)(reactor) d(-1) during the nitrite-containing periods of the SBR cycle. Over 90% of the inlet nitrogen load to the anammox reactor was removed and the sludge production was negligible. The nitritation efficiency of the first reactor limited the overall maximum rate of nitrogen elimination.     

Accelerating effect of hydroxylamine and hydrazine on nitrogen removal rate in moving bed biofilm reactor

In biological nitrogen removal, application of the autotrophic anammox process is gaining ground worldwide. Although this field has been widely researched in last years, some aspects as the accelerating effect of putative intermediates (mainly N?H? and NH?OH) need more specific investigation. In the current study, experiments in a moving bed biofilm reactor (MBBR) and batch tests were performed to evaluate the optimum concentrations of anammox process intermediates that accelerate the autotrophic nitrogen removal and mitigate a decrease in the anammox bacteria activity using anammox (anaerobic ammonium oxidation) biomass enriched on ring-shaped biofilm carriers. Anammox biomass was previously grown on blank biofilm carriers for 450 days at moderate temperature 26.0 (±0.5) °C by using sludge reject water as seeding material. FISH analysis revealed that anammox microorganisms were located in clusters in the biofilm. With addition of 1.27 and 1.31 mg N L?1 of each NH?OH and N?H?, respectively, into the MBBR total nitrogen (TN) removal efficiency was rapidly restored after inhibitions by NO??. Various combinations of N?H?, NH?OH, NH??, and NO?? were used as batch substrates. The highest total nitrogen (TN) removal rate with the optimum N?H? concentration (4.38 mg N L?1) present in these batches was 5.43 mg N g?1 TSS h?1, whereas equimolar concentrations of N?H? and NH?OH added together showed lower TN removal rates. Intermediates could be applied in practice to contribute to the recovery of inhibition-damaged wastewater treatment facilities using anammox technology.     

Anammox bacteria disguised as denitrifiers: nitrate reduction to dinitrogen gas via nitrite and ammonium

Anaerobic ammonium-oxidizing (anammox) bacteria oxidize ammonium with nitrite and produce N(2). They reside in many natural ecosystems and contribute significantly to the cycling of marine nitrogen. Anammox bacteria generally live under ammonium limitation, and it was assumed that in nature anammox bacteria depend on other biochemical processes for ammonium. In this study we investigated the possibility of dissimilatory nitrate reduction to ammonium by anammox bacteria. Physically purified Kuenenia stuttgartiensis cells reduced (15)NO(3) (-) to (15)NH(4) (+) via (15)NO(2) (-) as the intermediate. This was followed by the anaerobic oxidation of the produced ammonium and nitrite. The overall end-product of this metabolism of anammox bacteria was (15)N(15)N dinitrogen gas. The nitrate reduction to nitrite proceeds at a rate of 0.3 +/- 0.02 fmol cell(-1) day(-1) (10% of the 'normal' anammox rate). A calcium-dependent cytochrome c protein with a high (305 mumol min(-1) mg protein(-1)) rate of nitrite reduction to ammonium was partially purified. We present evidence that dissimilatory nitrate reduction to ammonium occurs in Benguela upwelling system at the same site where anammox bacteria were previously detected. This indicates that anammox bacteria could be mediating dissimilatory nitrate reduction to ammonium in natural ecosystems.     

Stability of the ANAMMOX process in a gas-lift reactor and a SBR

In the last years, the ANAerobic AMMonium OXidation (ANAMMOX) process has been put forward as a promising alternative to treat ammonium rich wastewaters. An ANAMMOX gas-lift reactor and a sequential batch reactor (SBR) were operated during around 200 days in this study, reaching nitrogen loading rates (NLRs) of 2.0 and 0.75 g l(-1) per day, respectively. The efficiency in the nitrite (limiting substrate) removal was 99%. The ammonium and nitrite influent concentrations were increased stepwise until biomass in the reactors started to float. These flotation events coincided with periods when the NLR exceeded the maximum specific ANAMMOX activity (MSAA) of the sludge. The MSAA, determined in batch experiments, was 0.9 and 0.44 g g(-1) per day for biomasses from the gas-lift reactor and the SBR, respectively. Flotation of the biomass occurred most likely due to a granule density decrease caused by dinitrogen gas accumulation inside the granules and an apparent breakage of the granules. Further research is needed to understand this phenomenon and to optimise the corresponding strategies to counteract the flotation.     

Enhancing mainstream nitrogen removal by employing nitrate/nitrite-dependent anaerobic methane oxidation processes

Due to serious eutrophication in water bodies, nitrogen removal has become a critical stage for wastewater treatment plants (WWTPs) over past decades. Conventional biological nitrogen removal processes are based on nitrification and denitrification (N/DN), and are suffering from several major drawbacks, including substantial aeration consumption, high fugitive greenhouse gas emissions, a requirement for external carbon sources, excessive sludge production and low energy recovery efficiency, and thus unable to satisfy the escalating public needs. Recently, the discovery of anaerobic ammonium oxidation (anammox) bacteria has promoted an update of conventional N/DN-based processes to autotrophic nitrogen removal. However, the application of anammox to treat domestic wastewater has been hindered mainly by unsatisfactory effluent quality with nitrogen removal efficiency below 80%. The discovery of nitrate/nitrite-dependent anaerobic methane oxidation (n-DAMO) during the last decade has provided new opportunities to remove this barrier and to achieve a robust system with high-level nitrogen removal from municipal wastewater, by utilizing methane as an alternative carbon source. In the present review, opportunities and challenges for nitrate/nitrite-dependent anaerobic methane oxidation are discussed. Particularly, the prospective technologies driven by the cooperation of anammox and n-DAMO microorganisms are put forward based on previous experimental and modeling studies. Finally, a novel WWTP system acting as an energy exporter is delineated.     

Long-term continuous partial nitritation-anammox reactor aeration optimization at different nitrogen loading rates for the treatment of ammonium rich digestate lagoon supernatant

Dissolved oxygen (DO) is an important parameter for partial nitritation-anammox process but previously not evaluated for the treatment of digested biosolid thickening lagoon supernatant. Using intermittent aeration we investigated nitrogen removal from such supernatant in an integrated fixed film activated sludge (IFAS) process operated under a variety of hydraulic retention times (1.2–2.5 days). The overall nitrogen removal rate (NRR) was significantly increased (P < 0.01) from 0.26 ± 0.01 kg N m⁻³ d^-1 at HRT of 2.5 days to 0.50 ± 0.01 kg N m^-3 d^-1 at HRT of 1.2 day. Higher nitrogen loading rates needed higher DO concentrations in order to cope with the increased oxygen demand by ammonium-oxidizing bacteria (AOB). Enhancing the DO concentration from 0.18 mg L^-1 to 0.35 mg L^-1 improved AOB activity. However, when the bulk liquid DO was in the range of 0.28−0.35 mg L^-1, anammox activity inhibition was observed associated with a significant free nitrous acid (FNA) accumulation (21.70 ± 4.10 μg L^-1). Batch studies confirmed the inhibition of anammox activity under high DO conditions (0.28−0.35 mg L^-1). Aeration strategies, other than increasing the DO set points, should be investigated in order to be able to work at high nitrogen loading rates without compromising anammox activity.     

Effects of nitrite inhibition on anaerobic ammonium oxidation

In order to assess the stability of nitrogen removal systems utilizing anaerobic ammonium oxidation (anammox), it is necessary to study the toxic effects of nitrite on these biochemical reactions. In this study, the effects of nitrite on anammox bacteria entrapped in gel carriers were investigated using batch and continuous feeding tests. The results showed that the nitrite concentration in a reactor must be less than 274-mg N/L in order to prevent a decrease in the anammox activity, which occurred when the gel carriers were soaked in nitrite solutions with concentrations greater than 274-mg N/L in a batch test. In a continuous feeding test, nitrite inhibition was not observed at low concentrations of nitrite. However, the anammox activity decreased to 10% when the nitrite concentration increased to 750-mg N/L over a 7-day period in the reactor. In addition, it was shown that the effects of nitrogen on the anammox reaction were reversible because the anammox activity completely recovered within 3 days when the influent nitrite concentration was decreased to less than 274-mg N/L.     

Dispersal and control of anammox granular sludge at high substrate concentrations

This paper reports about the dispersal and control of anammox granular sludge at high substrate concentrations. The results demonstrate that anammox granular sludge would turn into flocculent sludge when the substrate concentrations exceed the inhibitory threshold concentrations, with an apparent drop in the settling velocity of anammox sludge from 73.73 to 16.49 m/h. Moreover, the sludge was washed out of the reactor and a decrease in the nitrogen removal rate from 23.82 to 16.97 kg N/(m³/day) was observed. The dominant anammox bacteria in the granular and flocculent sludge were Candidatus Kuenenia stuttgartiensis; however, the contents of heme c and extracellular polymeric substances in the flocculent sludge were much lower than in the granular sludge. Furthermore, the chemical composition of extracellular polymeric substances was different. The high nitrite concentrations more than the inhibitory threshold concentrations were regarded as the reason for the observed granular sludge dispersal and deterioration in reactor performance. The apparent dispersed granular sludge and malfunction of reactor performance could be recovered by means of washing out the residual substrate from the reactor and then re-running the reactor from low substrate concentrations.     

Rapid startup and high rate nitrogen removal from anaerobic sludge digester liquor using a SNAP process

In this study, a single-stage autotrophic nitrogen removal reactor, packed with a novel acrylic fiber biomass carrier material (Biofix), was applied for nitrogen removal from sludge digester liquor. For rapid start-up, conventional activated sludge was added to the reactor soon after the attachment of anammox biomass on the Biofix carriers, which allowed conventional activated sludge to form a protective layer of biofilm around the anammox biomass. The Nitrogen removal efficiency reached 75% within 1 week at a nitrogen loading rate of 0.46 kg-N/m³/day for synthetic wastewater treatment. By the end of the synthetic wastewater treatment period, the maximum nitrogen removal rate had increased to 0.92 kg-N/m³/day at a nitrogen loading rate of 1.0 kg-N/m³/day. High nitrogen removal rate was also achieved during the actual raw digester liquor treatment with the highest nitrogen removal rate being 0.83 kg-N/m³/day at a nitrogen loading rate of 0.93 kg-N/m³/day. The thick biofilm on Biofix carriers allowed anammox bacteria to survive under high DO concentration of 5–6 mg/l resulting in stable and high nitrogen removal performance. FISH and CLSM analysis demonstrated that anammox bacteria coexisted and surrounded by ammonium oxidizing bacteria.     

Assessment of the positive effect of salinity on the nitrogen removal performance and microbial composition during the start-up of CANON process

In this study, a non-woven rotating biological contactor reactor was operated for the start-up of completely autotrophic nitrogen removal over nitrite (CANON) process. In this perfectly attached growth system, nitrite oxidizing was identified, which interfered with the nitrogen removal performance. Batch tests indicated that 10 g NaCl per liter salinity was a preferable definite level to stand out ammonium-oxidizing activity and anammox activity, and selectively suppress nitrite-oxidizing activity under oxygen-limited conditions. Reactor operation showed that the maximum TN removal rate was increased from 425 mg N l(-1) day(-1) to 637 mg N l(-1) day(-1) after the addition of 10 g NaCl per liter salinity on analogous technological parameters. Microbiological community analysis revealed that bacteria strains similar to the genus Nitrospira sp. were specialized nitrite oxidizers existing in CANON reactor, which were then eliminated under salinity exposure for their no salinity-tolerant relative. However, anammox bacteria belonging to Planctomycetes and some aerobic ammonium oxidizers belonging to Nitrosomonas could be highly enriched under this oxygen-limited salinity conditions. Salinity-contained high ammonium wastewater will be so considered as suitable influent for CANON process in further industrial application.     

Enhanced biological nutrient removal using MUCT-MBR system

Biological nutrient removal was investigated in a combined modified University of Cape Town and membrane bioreactor system. When the influent nutrient mass ratio (COD/TN/TP) was 28.5/5.1/1 to 28.5/7.2/1, average removal efficiencies of COD, TN and TP were 90%, 81.6%, 75.2%. Obvious denitrifying phosphorus removal occurred with C/N ratio 3.98. When nitrite was the main electron acceptor, the ratio of denitrifying phosphate uptake to the total phosphate uptake were 99.8% and the sludge yield was 0.28kg VSS/kg COD; when nitrate was the main electron acceptor, the ratio was 92% and the yield was 0.32kg VSS/kg COD. In case of nitrite, the system not only kept TP and TN removal at 89.1% and 82.2%, but also ensured less sludge production. Batch tests showed that the proportion of denitrifying phosphorus-accumulating organisms in the total phosphorus-accumulating organisms in the system was higher than 80%.     

Anaerobic ammonium oxidation process in an upflow anaerobic sludge blanket reactor with granular sludge selected from an anaerobic digestor

The purpose of this work was to evaluate the development of the anammox process by the use of granular sludge selected from a digestion reactor as a potential seed source in a lab-scale UASB (upflow anaerobic sludge blanket) reactor system. The reactor was operated for approximately 11 months and was fed by synthetic wastewater. After 200 days of feeding with NH₄ ⁺ and NO₂ ⁻ as the main substrates, the biomass showed steady signs of ammonium consumption, resulting in over 60% of ammonium nitrogen removal. This report aims to present the results and to more closely examine what occurs after the onset of anammox activity, while the previous work described the start-up experiment and the presence of anammox bacteria in the enriched community using the fluorescencein situ hybridization (FISH) technique. By the last month of operation, the consumed NO₂ ⁻N/NH₄ ⁺-N ratio in the UASB reactor was close to 1.32, the stoichiometric ratio of the anammox reaction. The obtained results from the influentshutdown test suggested that nitrite concentration would be one key parameter that promotes the anammox reaction during the start-up enrichment of anammox bacteria from granular sludge. During the study period, the sludge color gradually changed from black to red-brownish.