Rhamnolipid production by Pseudomonas aeruginosa engineered with the Vitreoscilla hemoglobin gene

The potential of Pseudomonas aeruginosa expressing the Vitreoscilla hemoglobin gene (vgb) for rhamnolipid production was studied. P. aeruginosa (NRRL B-771) and its transposon mediated vgb transferred recombinant strain, PaJC, were used in the research. The optimization of rhamnolipid production was carried out in the different conditions of cultivation (agitation rate, the composition of culture medium and temperature) in a time-course manner. The nutrient source, especially the carbon type, had a dramatic effect on rhamnolipid production. The PaJC strain and the wild type cells of P. aeruginosa started producing biosurfactant at the stationary phase and its concentration reached maximum at 24 h (838 mg/l(-1)) and at 72 h (751 mg l(-1)) of the incubation respectively. Rhamnolipid production was optimal in batch cultures when the temperature and agitation rate were controlled at 30 degrees C and 100 rpm. It reached 8373 mg l(-1) when the PaJC cells were grown in 1.0% glucose supplemented minimal media. Genetic engineering of biosurfactant producing strains with vgb may be an effective method to increase its production.     

Effects of carbon and nitrogen sources on rhamnolipid biosurfactant production by <Emphasis Type="Italic">Pseudomonas nitroreducens</Emphasis> isolated from soil

Rhamnolipid biosurfactant production by Pseudomonas nitroreducens isolated from petroleum-contaminated soil was investigated. The effects of carbon, nitrogen and carbon to nitrogen ratio on biosurfactant production were examined using mineral salts medium as the growth medium. The tenso-active properties (surface activity and critical micelle concentrations of the produced biosurfactant were also evaluated. The best carbon source, nitrogen source were glucose and sodium nitrate giving rhamnolipid yields of 5.28 and 4.38 g l⁻¹, respectively. The maximum rhamnolipid production of 5.46 g l⁻¹ was at C/N (glucose/sodium nitrate) of 22. The rhamnolipid biosurfactant reduced the surface tension of water from 72 to ~37 mN/m. It also has critical micelle concentration of ~28 mg l⁻¹. Thus, the results presented in our reports show that the produced rhamnolipid can find wide applications in various bioremediation activities such as enhanced oil recovery and petroleum degradation.     

Production Kinetics and Tensioactive Characteristics of Biosurfactant from a Pseudomonas aeruginosa Mutant Grown on Waste Frying Oils

Various waste frying oils (WFOs) were evaluated as substrates for rhamnolipid production by Pseudomonas aeruginosa mutant EBN-8 in the presence or absence of rhamnolipid precursor, under single-/batch-fed conditions. Soybean WFO was the best substrate, producing 9.3 g rhamnolipid l⁻¹ with the specific product yield of 2.7 g g⁻¹ h, under batch-fed cultivation with the addition of rhamnolipid precursor. The surface tension of the cell-free culture broth (CFCB) was 29.1 mN m⁻¹ and the interfacial tension against n-hexadecane was <1 mN m⁻¹. The hydrocarbon/ CFCB systems showed the relative emulsion stability to be in the range of 89.7–92.3.     

Improved production of biosurfactant by a <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> mutant using vegetable oil refinery wastes

Biosurfactant production by Pseudomonas aeruginosa EBN-8 mutant was studied in shake flasks on separate wastes from canola, soybean and corn oil refineries. Of the substrates tested, canola oil refinery waste (COD=20 g l⁻¹) supplemented with sodium nitrate (at COD/N=20) showed the best microbial growth (4.50 g l⁻¹) and rhamnolipid production (8.50 g l⁻¹), at 10 d of incubation with the specific growth rate of 0.316 h⁻¹ and specific product yield of 0.597 g g⁻¹ h. Its cell-free supernatant showed the critical micelle dilution (CMD) of 150 and surface tension (ST) of 28.5 mN m⁻¹.     

Expression of Vitreoscilla hemoglobin in Gordonia amarae enhances biosurfactant production

The gene (vgb) encoding Vitreoscilla (bacterial) hemoglobin (VHb) was electroporated into Gordonia amarae, where it was stably maintained, and expressed at about 4 nmol VHb g⁻¹ of cells. The maximum cell mass (OD₆₀₀) of vgb-bearing G. amarae was greater than that of untransformed G. amarae for a variety of media and aeration conditions (2.8-fold under normal aeration and 3.4-fold under limited aeration in rich medium, and 3.5-fold under normal aeration and 3.2-fold under limited aeration in mineral salts medium). The maximum level of trehalose lipid from cultures grown in rich medium plus hexadecane was also increased for the recombinant strain, by 4.0-fold in broth and 1.8-fold in cells under normal aeration and 2.1-fold in broth and 1.4-fold in cells under limited aeration. Maximum overall biosurfactant production was also increased in the engineered strain, by 1.4-fold and 2.4-fold for limited and normal aeration, respectively. The engineered strain may be an improved source for producing purified biosurfactant or an aid to microorganisms bioremediating sparingly soluble contaminants in situ.     

Metabolic engineering of Aeromonas hydrophila for the enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Wild-type Aeromonas hydrophila 4AK4 produced 35–45 wt.% poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) consisting of 10–15 mol% 3-hydroxyhexanoate (3HHx). To enhance PHBHHx production, vgb gene encoding Vitreoscilla haemoglobin or fadD gene encoding Escherichia coli acyl-CoA synthase was co-expressed with polyhydroxyalkanoates (PHA) synthesis-related genes including phbAB from Wautersia eutropha and phaPCJ from A. hydrophila. Expression of vgb increased PHBHHx content from 46 to 53 wt.% without affecting the polymer monomers composition, whereas fadD increased both PHBHHx content from 46 to 64 wt.% and its 3HHx fraction from 15 to 24 mol%. Co-expression of vgb or fadD gene with PHA-synthesis-related genes generally increased PHBHHx content over 60 wt.%. Co-expression of phbAB with vgb increased PHBHHx content and concentration up to about 70 wt.% and 4.0 g l⁻¹, respectively. Fermentor study also showed that in the recombinants harboring vgb, CDW, PHBHHx concentration and productivity were significantly elevated up to 54 g l⁻¹, 28.5 g l⁻¹ and 0.791 g l⁻¹ h⁻¹, respectively, suggesting that vgb could promote PHA synthesis. In this strain, lac promoter could be used to constitutively express foreign genes such as phbA and phbB encoding β-ketothiolase and NADPH-dependent acetoacetyl-CoA reductase of W. eutropha, respectively, without use of IPTG. The results showed that combined expression of different genes was a successful strategy to enhance PHA production, which could be useful for strain development to construct other recombinant PHA-producing strains.     

Characterization of glycolipid biosurfactant from Pseudomonas aeruginosa CPCL isolated from petroleum‐contaminated soil

Aims: To isolate and characterize the biosurfactant‐producing micro‐organism from petroleum‐contaminated soil as well as to determine the biochemical properties of the biosurfactant. Methods and Results: A novel rhamnolipid‐producing Pseudomonas aeruginosa (GenBank accession number GQ241355 ) strain was isolated from a petroleum‐contaminated soil. Surface active compound was separated by solvent extraction of the acidified culture supernatant. The extract was able to reduce the surface tension of water from 72 to 44 mN m^?1 at a critical micelle concentration of 11·27 ± 1·85 mg l^?1. It showed better activity (based on microdilution method) against Gram‐positive (≤ 31 mg ml^?1) bacteria and filamentous fungi (≤ 50 mg ml^?1) than Gram‐negative bacteria (≥ 125 mg ml^?1) with mild toxicity (HC₅₀– 38 ± 8·22 μg ml^?1) to red blood cells. Fourier transform infrared spectroscopy revealed the presence of aliphatic chain, hydroxyl groups, ester and glycosidic bonds. Presence of nineteen rhamnolipid homologues with variation in chain length and saturation was revealed from liquid chromatography coupled to mass spectrometry with electrospray ionization. Conclusion: The results indicate that the isolated biosurfactant has a novel combination of rhamnolipid congeners with unique properties. Significance and Impact of the Study: This study provides a biosurfactant, which can be used as a biocontrol agent against phytopathogens (Fusarium proliferatum NCIM 1105 and Aspergillus niger NCIM 596) and exploited for biomedical applications.     

Bioactive hydroxyphenylpyrrole-dicarboxylic acids from a new marine Halomonas sp.: production and structure elucidation

The new marine Halomonas sp. strain GWS-BW-H8hM (DSM 17996) was found to produce 3-(4′-hydroxyphenyl)-4-phenylpyrrole-2,5-dicarboxylic acid (HPPD-1) and 3,4-bis(4′-hydroxy- phenyl)pyrrole-2,5-dicarboxylic acid (HPPD-2). In initial cultivations using marine broth, only low contents of these compounds have been isolated. Improving the conditions and growing the strain on artificial seawater supplemented with tryptone 10 g l⁻¹, yeast extract 5 g l⁻¹, l-tyrosine 0.6 g l⁻¹, glycine 1 g l⁻¹, and glucose 6 g l^-1, the growth-associated HPPD-1 and HPPD-2 production of a 40-l batch cultivation reached the amounts of 47 mg l⁻¹ and 116 mg l⁻¹, respectively, after 65 h. Both compounds showed potent anti-tumor-promoting activities.     

Isolation and characterization of phenol-degrading yeasts from an oil refinery wastewater in Brazil

This study investigated the aerobic degradation of phenol by yeast strains isolated from an oil refinery wastewater from the Northeast of Brazil. The samples displayed low fungal diversity, as only yeast colonies were detected on Sabouraud dextrose agar containing chloramphenicol 0.05% (w/v). Among the isolates, three yeast strains were selected to be evaluated for their potential for degrading high phenol concentrations. These species were identified through morphological and biochemical characteristics as Candida tropicalis, C. rugosa, and Pichia membranaefaciens. Although the strains were able to degrade the phenol concentration present in the wastewater, which was 7 mg l⁻¹, only C. tropicalis was capable of growing at high concentrations of phenol such as 500 mg l⁻¹ and 1,000 mg l⁻¹ in a mineral medium containing this pollutant as the only carbon source. C. rugosa and P. membranaefaciens were inhibited in the presence of 500 mg l⁻¹ of phenol. However, a longer incubation time was needed for C. tropicalis strain to degrade 1,000 mg l⁻¹ of phenol compared to the time required to degrade 500 mg l⁻¹. Moreover, the strain released a significant amount of polysaccharide biosurfactant in the medium probably to minimize the toxic effect of the high phenol concentration. When challenged with 1,500 and 2,000 mg l⁻¹ of phenol, C. tropicalis was unable to grow at the tested conditions. The results indicate that this strain of C. tropicalis can be considered both a good phenol-degrader and biosurfactant-producer. Application of this strain might be useful in bioremediation activities or treatment of phenol-polluted wastewater.     

Expression of <Emphasis Type="Italic">Vitreoscilla</Emphasis> hemoglobin in <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis> improve the cell density and insecticidal crystal proteins yield

The Vitreoscilla hemoglobin (VHb) gene (vgb) was integrated into the chromosome of Bacillus thuringiensis BMB171 using integrative vector pEG491. The production of VHb was confirmed by CO-difference spectra analysis. Fermentation experiments results showed that with the production of VHb, the critical oxygen concentration (COC) of the host strain was reduced from 18 to 12%. The maximum viable cell counts of the VHb⁺ strain in high, middle, and low aeration/agitation fermentations were 0.94-, 1.23-, and 1.59-fold of those of the VHb⁻ strain, respectively. Under the same conditions, the yields of insecticidal crystal proteins (ICP) by VHb⁺ strain were 1.22-, 1.63-, and 3.13-fold of those of the VHb⁻ strain. The production of VHb also accelerated the formation of ICP and spores. These results indicated that the production of VHb could improve the cell density and ICP yield of B. thuringiensis, especially under low aeration/agitation condition.     

Concentration dependent growth/non-growth linked kinetics of endosulfan biodegradation by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis>

The rates of biodegradation of endosulfan by P. aeruginosa were determined with different initial endosulfan concentrations (10, 50, 100, 150, 200 and 250 mg l⁻¹) and different growth linked kinetic models were fitted at these concentrations. At 10 mg endosulfan l⁻¹, Monod no growth model was well fitted. Monod with growth model described the biodegradation pattern at an initial concentration of 50, 100 and 150 mg endosulfan l⁻¹. Significant increases of P. aeruginosa MN2B14 density in broth culture during incubation further support this result. Conversely, zero order kinetic model was well fitted into the biodegradation data if initial endosulfan concentration was ≥200 mg endosulfan l⁻¹. The kinetics of endosulfan biodegradation by P. aeruginosa MN2B14 in liquid broth was highly dependent upon its initial concentration. The results of this study could be employed for predicting the persistence of endosulfan in water environment containing P. aeruginosa as an endosulfan degrading bacterium.     

Dependence of Pseudomonas aeruginosa continous culture biosurfactant production on nutritional and environmental factors

Summary Continuous culture studies with Pseudomonas aeruginosa were performed in order to establish nutritional and environmental conditions necessary for high production of biosurfactants. Empirical adjustments of the mineral medium formulation showed that better yields of the active compounds, rhamnolipids, are obtained by minimizing the concentration of the respective salts of magnesium, calcium, potassium, sodium and the trace elements. Improvements in performance were more evident when the intial substrate concentration, glucose, was increased up to 73 gl^-1. Further, the ranges for pH (6.2 to 6.4) and temperature (32° to 34°C) that yield high biosurfactant biosynthesis were established. Concerning the physiological state of the microorganism, rhamnolipid formation was restricted to specific growth rates lower than D=0.14 h^-1. By applying the conditions elaborated up to 300 mg rhamnose l^-1 h^-1 (equivalent to 685 mg rhamnolipid l^-1 h^-1) were obtained in a continuous production process.     

The Effect of Rhamnolipid Biosurfactant Produced by <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> on Model Bacterial Strains and Isolates from Industrial Wastewater

In this study, the effect of rhamnolipid biosurfactant produced by Pseudomonas fluorescens on bacterial strains, laboratory strains, and isolates from industrial wastewater was investigated. It was shown that biosurfactant, depending on the concentration, has a neutral or detrimental effect on the growth and protein release of model Gram (+) strain Bacillus subtilis 168. The growth and protein release of model Gram (−) strain Pseudomonas aeruginosa 1390 was not influenced by the presence of biosurfactant in the medium. Rhamnolipid biosurfactant at the used concentrations supported the growth of some slow growing on hexadecane bacterial isolates, members of the microbial community. Changes in cell surface hydrophobicity and permeability of some Gram (+) and Gram (−) isolates in the presence of rhamnolipid biosurfactant were followed in experiments in vitro. It was found that bacterial cells treated with biosurfactant became more or less hydrophobic than untreated cells depending on individual characteristics and abilities of the strains. For all treated strains, an increase in the amount of released protein was observed with increasing the amount of biosurfactant, probably due to increased cell permeability as a result of changes in the organization of cell surface structures. The results obtained could contribute to clarify the relationships between members of the microbial community as well as suggest the efficiency of surface properties of rhamnolipid biosurfactant from Pseudomonas fluorescens making it potentially applicable in bioremediation of hydrocarbon-polluted environments.     

Production and characterisation of a biosurfactant isolated from Pseudomonas aeruginosa UW-1

Pseudomonas aeruginosa UW-1 produced 17–24 g L⁻¹ rhamnolipid in vegetable oil-containing media in shake flask cultures in 13 days. In time course studies of growth and rhamnolipid production in a salts medium containing 6% canola oil, total bacterial count reached 2.6 × 10¹⁰ CFU ml⁻¹ after 48 h and a maximum rhamnolipid yield of 24.3 g L⁻¹ was obtained after 9 days. Rhamnolipid components were purified and separated by chloroform-methanol extraction and TLC chromatography. The major rhamnolipid components were characterised as L-rhamnosyl-β-hydroxydecanoyl-β-hydroxydecanoate and L-rhamnosyl-L-rhamnosyl-β-hydroxydecanoyl-β-hydroxydecanoate by nuclear magnetic resonance and mass spectrometry. The components were separated preparatively by silica gel column chromatography. The recovered monorhamnosyl fraction contained no dirhamnosyl moiety while the recovered dirhamnosyl fraction contained 5% of the monorhamnosyl moiety when analyzed by HPLC. The ratio of mono- to dirhamnosyl components produced by P. aeruginosa UW-1 was determined by HPLC to be 4 : 1 by weight. Purified mono- and dirhamnosyl components had the same CMC value of 40 μg ml⁻¹ and decreased the surface tension of water to 27.7 and 30.4 dynes cm⁻¹, respectively. Received 04 April 1997/ Accepted in revised form 15 July 1997     

Biosurfactant production and hydrocarbon-degradation by halotolerant and thermotolerant Pseudomonas sp.

A hydrocarbon degrading and biosurfactant producing, strain DHT2, was isolated from oil-contaminated soil. The organism grew and produced biosurfactant when cultured in variety of substrates at salinities up to 6 g l⁻¹ and temperatures up to 45°C. It was capable of utilizing crude oil, fuels, alkanes and PAHs as carbon source across the wide range of temperature (30–45°C) and salinity (0–6%). Over the range evaluated, the salinity and temperature did not influence the degradation of hydrocarbon and biosurfactant productions. Isolate DHT2 was identified as Pseudomonas aeruginosa by analysis of 16S rRNA sequences (100% homology) and biochemical analysis. PCR and DNA hybridization studies revealed that enzymes involved in PAH metabolism were related to the naphthalene dioxygenase pathway. Observation of both tensio-active and emulsifying activities indicated that biosurfactants were produced by DHT2 during growth on both, water miscible and immiscible substrates, including PAH. The biosurfactants lowered the surface tension of medium from 54.9 to 30.2 dN/cm and formed a stable emulsion. The biosurfactant produced by the organism emulsified a range of hydrocarbons with hexadecane as best substrate and toluene was the poorest. These findings further indicate that the isolate could be useful for bioremediation and bio-refining application in petroleum industry.     

Cadmium effects on transcriptional expression of rhlB/rhlC genes and congener distribution of monorhamnolipid and dirhamnolipid in Pseudomonas aeruginosa IGB83

While variable production of the biosurfactant, rhamnolipid, by Pseudomonas aeruginosa has been shown to be dependent on growth conditions, no research has evaluated potential relationships between rhamnolipid production and the presence of heavy metals. The current investigation evaluates the influence of Cd²⁺ on rhamnolipid synthesis. Cultures grown in the presence of 0.45 and 0.89 mM Cd²⁺ were monitored for rhlB/rhlC expression, rhamnolipid yield, and the ratio of monorhamnolipid (RL1) and dirhamnolipid (RL2) produced. Results show a Cd-induced enhancement of rhlB expression in mid-stationary phase (53 h). In addition, sustained production of rhamnolipid through late stationary growth phase (96 h) was observed for Cd-amended cultures, unlike Cd-free control cultures that ceased rhamnolipid production by mid-stationary growth phase. Most significant was an observed increase in the ratio of RL2 to RL1 congeners produced by cultures grown in the presence of Cd²⁺. Previous results have shown that the complexation constant for RL2–Cd is several orders of magnitude larger than that of RL1–Cd thus the preferential production of RL2 in the presence of Cd²⁺ impacts its bioavailability and toxicity both for the cell and in the surrounding environment.     

Cassava wastewater as a substrate for the simultaneous production of rhamnolipids and polyhydroxyalkanoates by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis>

Glycerol, cassava wastewater (CW), waste cooking oil and CW with waste frying oils were evaluated as alternative low-cost carbon substrates for the production of rhamnolipids and polyhydroxyalkanoates (PHAs) by various Pseudomonas aeruginosa strains. The polymers and surfactants produced were characterized by gas chromatography–mass spectrophotometry (MS) and by high-performance liquid chromatography–MS, and their composition was found to vary with the carbon source and the strain used in the fermentation. The best overall production of rhamnolipids and PHAs was obtained with CW with frying oil as the carbon source, with PHA production corresponding to 39% of the cell dry weight and rhamnolipid production being 660 mg l⁻¹. Under these conditions, the surface tension of the culture decreased to 30 mN m⁻¹, and the critical micelle concentration was 26.5 mg l⁻¹. It would appear that CW with frying oil has the highest potential as an alternative substrate, and its use may contribute to a reduction in the overall environmental impact generated by discarding such residues.     

Effect of ammonium sulphate concentration and agitation speed on the kinetics of alginate production by Azotobacter vinelandii DSM576 in batch fermentation

Growth and alginate production by Azotobacter vinelandii DSM576 as a function of initial ammonium sulphate concentration (0.45–1.05 g l⁻¹) and agitation speed (300–700 rpm) were studied in batch fermentations at controlled pH. The time course of growth, alginate production and substrate consumption and the effect of nitrogen concentration and agitation speed on kinetic parameters and on maximum alginate molecular weight (MW) was modelled using empirical equations. The kinetics of growth, alginate production and polymerization were deeply affected by agitation speed and, to a lesser extent, by inorganic nitrogen concentration. Average and maximum specific growth rate and maximum alginate MW all increased with agitation speed, and were higher at intermediate ammonium sulphate concentration. Maximum alginate MW (>250,000) was obtained at high agitation speed (600–700 rpm) and alginate depolymerization was limited or did not occur at all when the agitation speed was higher than 500 rpm, while at 400 rpm depolymerization significantly reduced the alginate. However, alginate yield was negatively affected by increasing agitation speed. A good compromise between alginate yield (>2 g l⁻¹) and quality (MW>250,000) was obtained with agitation speed of 500–600 rpm and 0.75–0.90 g l⁻¹ of ammonium sulphate. Journal of Industrial Microbiology & Biotechnology (2000) 25, 242–248. Received 23 February 2000/ Accepted in revised form 04 August 2000     

Effect of surfactants on pyrene degradation by Pseudomonas fluorescens 29L

The effect of surfactants on pyrene degradation in Pseudomonas fluorescens 29L was investigated. This strain produced 30.1 μM of rhamnolipid equivalents (RE) of biosurfactants on 50 mg of pyrene per liter of medium. The production of biosurfactants was significantly correlated with the water solubility (S _w) of the substrate and the growth rate on it. When chrysene, with a S _w of 2.8 × 10⁻³ mg per liter of water, was the carbon source, 13.1 μM of RE of biosurfactants were produced compared to 10.3 μM of RE of biosurfactants on acenaphthene with a S _w of 1.9 mg per liter of water. No biosurfactants were produced on salicylic acid, catechol, and citrate. All of the strain 29L mutants which grew on pyrene produced biosurfactants while among the mutants which grew on naphthalene, only 88.4% produced biosurfactants. The rhamnolipid mixture, JBR425, inhibited the growth of Strain 29L wild type (WT) and all of its mutants on pyrene. However, these mutants were able to grow in the presence of pyrene when the growth medium was supplemented with 10⁻⁶ mg of emulsan per milliliter of medium. This study implies biosurfactants are produced by Strain 29L as a physiological response to the hydrophobicity of pyrene. The combined use of indigenous biosurfactants and the added biosurfactant, emulsan, is a biotechnology to enhance pyrene degradation by Pseudomonas fluorescens 29L.     

Effects of Rhamnolipids from Pseudomonas aeruginosa DS10-129 on Luminescent Bacteria: Toxicity and Modulation of Cadmium Bioavailability

In this study, the mixture of mono- and di-rhamnolipids produced by Pseudomonas aeruginosa DS10-129 was characterized for its toxicity and modulatory effects on Cd availability to different bacteria. Gram-negative naturally bioluminescent Vibrio fischeri and recombinant bioluminescent Pseudomonas fluorescens, P. aeruginosa, Escherichia coli, and Gram-positive Bacillus subtilis were used as model organisms. Rhamnolipids reduced the bioluminescence of these bacteria in less than a second of exposure even in relatively low concentrations (30-min EC₅₀ 45–167 mg l⁻¹). Toxicity of Cd to Gram-negative bacteria (30-min EC₅₀ values 0.16 mg l⁻¹ for E. coli, 0.96 mg l⁻¹ for P. fluorescens, and 4.4 mg l⁻¹ for V. fischeri) was remarkably (up to 10-fold) reduced in the presence of 50 mg l⁻¹ rhamnolipids. Interestingly, the toxicity of Cd to Gram-positive B. subtilis (30-min EC₅₀ value 0.49 mg l⁻¹) was not affected by rhamnolipids. Rhamnolipids had an effect on desorption of Cd from soil: 40 mg l⁻¹ rhamnolipids increased the water-extracted fraction of Cd twice compared with untreated control. However, this additionally desorbed fraction of Cd remained bound with rhamnolipids and was not available to bacteria. Hence, in carefully chosen concentrations (still effectively complexing heavy metals but not yet toxic to soil bacteria), rhamnolipids could be applied in remediation of polluted areas.