Fluorescence quenching of tryptophan by trifluoroacetamide

Trifluoroacetamide was found to be a good quencher of tryptophan fluorescence, and the quenching was shown to proceed via both a dynamic and a static process. The respective quenching constants were determined by the measurement of the decrease of the fluorescence lifetime in the presence of the quencher. The static and the bimolecular rate quenching constants of N-acetyltryptophanamide are equal to 0.34 1·mol^?1 and 1.9·10⁹ 1·mol^?1·s^?1, respectively. These values indicate that trifluoroacetamide is an efficient quencher of tryptophan fluorescence. This conclusion is also supported by a complete quenching of bovine serum albumin and wheat germ agglutinin fluorescence. In the case of lysozyme, trifluoroacetamide quenches the fluorescence of tryptophan residues which fluoresce with a maximum at 348 nm but not the buried tryptophan residues which fluoresce with a maximum at 333 nm. Trifluoroacetamide quenching of wheat germ agglutinin emission confirms the homogeneity and the high accessibility of emitting tryptophan residues, in agreement with a previous report (Privat, J.P. and Monsigny, M. (1975) Eur. J. Biochem. 60, 555–567). The tryptophan fluorescence decay of wheat germ agglutinin is biexponential even in the presence of the quencher; the static and bimolecular rate quenching constants are equal to 0.22 1·mol^?1 and 092·10⁹ 1·mol^?1·^?1, respectively. In the presence of a specific lectin ligand, the methyldi-N,N′-trifluoroacetyl-β- chitobioside, the quenching of wheat germ agglutinin fluorescence involves a direct contact between tryptophan residues and trifluoroacetamido groups of the ligand and in contrast with the quenching induced by free trifluoroacetamide shows that the tryptophan fluorescence is not fully quenched.     

Spectrofluorimetric determination of bilirubin in serum samples

A new spectrofluorimetric method was developed for determination of trace amount of bilirubin. Using oxytetracycline–Eu³⁺ as a fluorescent probe, in the buffer solution of pH = 7.3, bilirubin can reduce remarkably the fluorescence intensity of the oxytetracycline–Eu³⁺ complex at λ = 612 nm and the reduced fluorescence intensity was in proportion to the concentration of bilirubin. Optimum conditions for the determination of bilirubin were also investigated. The linear range and limit of detection for the determination of bilirubin were 5.0 × 10^?7, 3.0 × 10^?5 and 7.7 × 10^?8 mol L^?1, respectively. This method is simple, practical and relatively free of interference from coexisting substances and can be successfully applied to assess bilirubin in serum samples and compared with the modified Jendrassik–Grof method in clinical analysis. The quenching mechanism of the fluorescence intensity in the system is also discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Turgor-sensitive transport in developing seeds of legumes: the role of the stage of development and the use of excised vs. attached seed coats

Abstract After removal of the embryo from developing seeds of Vicia faba L. and Pisum sativum L., the ‘empty’ ovules were filled with a substitute medium (pH 5.5) and the effect of the osmolality of this solution on assimilate transport was exandned. In pulse-labelling experiments with a mixture of [³H]sucrose and [¹⁴C]α-andnoisobutyric acid (AIB), a solute concentration of 400 mol m^?3 (100 mol m^3? sucrose + 300 mol m^?3 mannitol) was too low to maintain sugar and andno acid transport into empty ovules of V. faba in a very early stage of development (embryo dry weight < 100 mg) on the same level as transport into intact ovules within the same fruit. A 550-mol m^?3 solution could maintain the normal rate of transport. In experiments with seeds in a more advanced stage of development (embryo dry weight > 250 mg), transport of labelled sucrose and AIB into empty ovules filled with a 400-mol m^?3 solution was practically equal to transport into intact ovules within the same fruit. Experiments without isotopes, on sugar and andno acid release from the seed coat, confirmed the important role of the osmotic environment. A very low osmolality of the solution (e.g. 50 mol m^?3 mannitol) enhanced net efflux of assimilates from excised seed coats and cotyledons, by inhibiting resorption from the apoplast.     

Melittin-phospholipid interaction studied by employing the single tryptophan residue as an intrinsic fluorescent probe

The rotational correlation time of melittin, obtained from the nanosecond anisotropy of the emission from its single tryptophan residue, has been found to increase considerably in phosphate solution relative to that in aqueous solution, consistent with protein aggregation. The steady-state fluorescence spectra as well as the absorption spectra in phosphate solution exhibit a very good degree of similarity with those of the protein bound to egg phosphatidylcholine (PC) and distearoylphosphatidylcholine (DSPC) bilayer liposomes. The value of the second-order rate constant for dynamic quenching, $\text{k}{}_{\mathrm{<mtext>q</mtext>}}\text{= 1.4·10}{}^9\text{M}{}^{\mathrm{?1}}\text{·}\text{s}{}^{\mathrm{?1}}$, by acrylamide in 0.5 M phosphate solution is comparable to those for the protein-phospholipids complexes (1·10⁹ and 0.7·10⁹ M^?1·s^?1 for egg PC and DSPC, respectively). Similarities are also found in the nanosecond properties. There is a much stronger and quite similar dependence of the fluorescence spectra on time in the nanosecond range and of the fluorescence decay times on the emission wavelength in both cases as compared to the case in aqueous solution. These observations support the notion that melittin binds to the phospholipids in an aggregated form. The results suggest that the reduction in the $\text{k}{}_{\mathrm{<mtext>q</mtext>}}$ values of bound melittin relative to that in aqueous solution and the blue shift of the fluorescence spectrum (from 352 to 337 nm) are brought about by shielding of the tryptophan residue from the solvent through a combination of protein aggregation and enhancement of its α-helical content (suggested by published CD data). The magnitude of the $\text{k}{}_{\mathrm{<mtext>q</mtext>}}$ values for bound melittin, however, is still relatively high implying the occurrence of rather frequent encounters between the tryptophan residue and the hydrophilic acrylamide molecules. Thus, the residue is found not to penetrate deep into the phospholipid bilayer.     

Frequency-domain fluorescence studies of an extracellular metalloproteinase of Staphylococcus aureus

A frequency-domain fluorescence study of calcium-binding metalloproteinase from Staphylococcus aureus has shown that this two-tryptophan-containing protein exhibits a double-exponential fluorescence decay. At 10 degrees C in 0.05 M Tris-HCl buffer (pH 9.0) containing 10 mM CaCl2, fluorescence lifetimes of 1.2 and 5.1 ns are observed. Steady-state and frequency-domain solute-quenching studies are consistent with the assignment of the two lifetimes to the two tryptophan residues. The tryptophan residue characterized by a shorter lifetime has a maximum of fluorescence emission at about 317 nm and the second one exhibits a maximum of its emission at 350 nm. These two residues contribute almost equally to the protein's fluorescence. These results, as well as fluorescence-quenching studies using KI and acrylamide as a quencher, indicate that in calcium-loaded metalloproteinase, the tryptophan residue characterized by the shorter lifetime is extensively buried within the protein. The second residue is exposed on the surface of the protein. The tryptophan residues of metalloproteinase have acrylamide dynamic-quenching rate constants, kq values, of 2.3 and 0.26 X 10(9) M-1 X s-1 for the exposed and buried residue, respectively. A study of the temperature dependence of the fluorescence lifetime for the two tryptophan components gives activation energies, Ea values, for thermal quenching of 1.8 and 2.2 kcal/mol for the buried and the exposed residue, respectively. Dissociation of Ca2+ from the protein causes a change in the protein's structure, as can be judged from dramatic changes which occur in the fluorescence properties of the buried tryptophan residue. These changes include an approx. 13 nm red-shift in the maximum of the fluorescence emission and an increase in the acrylamide-quenching rate constant, and they indicate that the removal of Ca2+ results in an increase in the exposure and the polarity of the microenvironment of this 'blue' residue.     

Conformational States of Trifluoroacetic Acid–Treated Cytochrome c in the Presence of Salts and Alcohols

We have carried out a systematic investigation of salts- and alcohols-induced conformational alterations on the trifluoroacetic acid (TFA)-treated ferricytochrome c by soret absorption spectroscopy, far UV circular dichroism (CD), tryptophan fluorescence, and 1-anilino-8-naphthalene sulfonate (ANS) binding. TFA induces the unfolding of native cytochrome c obtained from horse heart leading to loss of secondary structure. The addition of increasing concentration of salts and alcohols leads to increase in MRE value at 222 and 208 nm indicating an increase in the alpha-helical content leading to formation of compact dimensional structure. Cytochrome c is a heme protein in which the resonance energy of tryptophan is transferred to heme resulting in quenched tryptophan fluorescence. Addition of alcohols leads to increase in tryptophan and ANS fluorescence. The tryptophan and ANS fluorescence in case of salts shows decreased fluorescence intensity. TFA-induced unfolded cytochrome c showed the soret absorption maximum at 394 nm. However, an intermediate state in presence of alcohols and salts showed the absorption maxima at 398 nm and 402 nm, respectively. Among all the salts and alcohols studied, K3Fe(CN)6 and butanol were found to be most effective as examined by the above-mentioned spectroscopic techniques. The order of effectiveness of alcohols was found to be butanol > propanol > ethanol > methanol. The following effective trend in the case of salts was obtained: K3Fe(CN)6 > K2SO4>KClO4 > KCl. These results suggest that alcohols induce an intermediate with molten globule-like conformation on the TFA unfolded state, whereas salts induce a refolded intermediate approaching native-like conformation.     

菓菠萝蛋白酶的分子构象与活力变化的研究

发现CBZ-Lys·pNP能有效地被菓菠萝蛋白酶(Fruit Bromelain E.C.3.4.22.5)作用,测得Km为4.167×10~(-4)mol/L,k_(cat)为742min~(-1)。以荧光和紫外差示光谱为监测手段,对酶分子构象变化进行研究。酶的荧光强度随胍浓度增大而逐渐下降,4mol/L胍变性时,发射峰自332nm红移到353nm,并在310nm处出现新的发射峰。酶的荧光强度都因SDS存在而下降,SDS浓度大于3.47mmol/L有所回升,并出现红移,同时在315nm处出现新的发射肩;紫外差示光谱显示在236nm有一个较显著的员峰,此峰与β-螺旋结构变化有关,278、286和295nm出现三个负峰,260nm有较小正峰,说明酶分子中Tyr、Trp和Phe的微环境发生了明显的变化。测定酶在不同浓度胍和SDS中的变性和失活速度常数,对酶构象变化及催化活力的关系作了比较研究,酶的失活速度均大于变性速度。     

Fluorescence probe enhanced spectrofluorimetric method for the determination of sparfloxacin in tablets and biological fluids

Yttrium‐sensitized fluorescence was used to develop a sensitive and simple spectrofluorimetric method for the determination of sparfloxacin. The method is based on the strong fluorescence of sparfloxacin after adding the fluorescence probe yttrium in buffer solution (pH = 8), and various factors influencing fluorescence were investigated. Under optimum conditions, the enhanced fluorescence intensity of the system showed a good linear relationship with the concentration of sparfloxacin over the range 8 × 10^?7 to 1.4 × 10^?5 mol L^?1 with a correlation coefficient of 0.9997. The detection limit (S/N = 3) was determined as 9.01 × 10^?8 mol L^?1. The mechanism of the sensitizing effect of probe was discussed. This method has been successfully applied for the determination of sparfloxacin in pharmaceuticals, human urine and serum samples; the result obtained was satisfactory. Copyright © 2010 John Wiley & Sons, Ltd.     

Conformational changes induced by binding of divalent cations to calregulin

Scatchard analysis of equilibrium dialysis studies have revealed that in the presence of 3.0 mM MgCl2 and 150 mM KCl, calregulin has a single binding site for Ca2+ with an apparent dissociation constant (apparent Kd) of 0.05 microM and 14 binding sites for Zn2+ with apparent Kd(Zn2+) of 310 microM. Ca2+ binding to calregulin induces a 5% increase in the intensity of intrinsic fluorescence and a 2-3-nm blue shift in emission maximum. Zn2+ binding to calregulin causes a dose-dependent increase of about 250% in its intrinsic fluorescence intensity and a red shift in the emission maximum of about 11 nm. Half-maximal wavelength shift occurs at 0.4 mol of Zn2+/mol of calregulin, and 100% of the wavelength shift is complete at 2 mol of Zn2+/mol of calregulin. In the presence of Zn2+ and calregulin the fluorescence intensity of the hydrophobic fluorescent probe 8-anilino-1-napthalenesulfonate (ANS) was enhanced 300-400% with a shift in emission maximum from 500 to 480 nm. Half-maximal Zn2+-induced shift in ANS emission maximum occurred at 1.2 mol of Zn2+/mol of calregulin, and 100% of this shift occurred at 6 mol of Zn2+/mol of calregulin. Of 12 cations tested, only Zn2+ and Ca2+ produced changes in calregulin intrinsic fluorescence, and none of these metal ions could inhibit the Zn2+-induced red shift in intrinsic fluorescence emission maximum. Furthermore, none of these cations could inhibit or mimic the Zn2+-induced blue shift in ANS emission maximum. These results suggest that calregulin contains distinct and specific ligand-binding sites for Ca2+ and Zn2+. While Ca2+ binding results in the movement of tryptophan away from the solvent, Zn2+ causes a movement of tryptophan into the solvent and the exposure of a domain with considerable hydrophobic character.     

Fluorescence quenching studies on the interaction of riboflavin with tryptophan and its analytical application

The ineraction between riboflavin (RBF) and tryptophan (Trp) was investigated using fluorescence spectroscopy and UV–vis absorption spectroscopy under physiological conditions. The fluorescence of Trp was quenched by RBF via dynamic quenching, which was analyzed using the Stern–Volmer relation. The value of the Forster distance R₀ (2.31 nm) was obtained according to the Forster's theory of nonradiative energy transfer. Under physiological conditions, a linear relationship could be established between the quenched fluorescence intensity of Trp and the concentration of RBF in the range of 5.8 × 10^‐7–2.0 × 10^‐5 mol/L. The detection limit was 1.8 × 10^‐7 mol/L. The method was successfully applied to determine riboflavin concentrations in pharmaceutical samples. Copyright © 2012 John Wiley & Sons, Ltd.     

A new spectrofluorimetric method for the determination of some tetracyclines based on their interfering effect on resonance fluorescence energy transfer

A rapid, simple, inexpensive and highly sensitive spectrofluorimetric method was developed for the determination of trace amounts of some tetracyclines (TCs), namely tetracycline hydrochloride (TCH), oxytetracycline hydrochloride (OTCH) and minocycline hydrochloride (MCH). Binding rhodamine B (RhB) to gold nanoparticles (Au NPs) resulted in quenching of the fluorescence of RhB by a resonance energy transfer (FRET) mechanism, with Au NPs as the energy acceptors. The presence of TCs caused the release of RhB molecules and recovered their fluorescence, and this was used as a basis for the quantitative determination of TCs. The reaction was monitored spectrofluorimetrically by measuring the increase in fluorescence of RhB at 572 nm starting 5 min after mixing the reagents in Tris buffer solution (pH 6.5). The effect of various experimental factors such as buffer type, pH, concentrations of the involved reagents and reaction time were studied to optimize the reaction conditions. Under optimum conditions, the calibration graphs were linear within the ranges 2.08 × 10^?9–1.04 × 10^?6 mol/L, 2.01 × 10^?9–1.00 × 10^?6 mol/L and 2.02 × 10^?9–1.01 × 10^?6 mol/L and detection limits (LODs) of 0.61 × 10^?9, 0.32 × 10^?9 and 0.66 × 10^?9 mol/L were calculated for TCH, OTCH and MCH, respectively, with corresponding percent relative standard deviations (%RSDs) of 1.18, 1.21 and 1.54 (n = 5). The method was successfully applied to the determination of TCs in drinking water, human urine, bovine milk and breast milk samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of an optical sensor for chlortetracycline detection based on the fluorescence quenching of l‐tryptophan

A simple and selective spectrofluorimetric method for the detection of chlortetracycline (CTC) was studied. In pH 7.4 buffer medium l ‐tryptophan (l ‐Trp), applied as the fluorescence probe, interacted with CTC resulting in fluorescence quenching of the probe. CTC was detected with maximum excitation and emission wavelengths at λ_ex/λ_em = 275/350 nm. Notably, quenching of fluorescence intensities was positively proportional to the CTC concentration over the range of 0.65–30 μmol L^?1 and the limit of detection was 0.2 μmol L^?1. Effect of temperature shown in Stern?Volmer plots, absorption spectra and fluorescence lifetime determination, indicated that fluorescence quenching of l ‐Trp by CTC was mainly by static quenching. The proposed study used practical samples analysis satisfactorily.     

Reduced stomatal responses to light, carbon dioxide and abscisic acid in the presence of sodium ions

Abstract Responses of stomata to light and CO₂ were smaller when detached epidermis of Commelina communis L. was incubated on a medium containing 50 mol m^?3 NaCl than when an equimolar KCl solution was used. Although opening in the light in the absence of CO₂ seemed to be the same whichever salt was present, apertures on KCl solutions were smaller in the dark or with CO₂-containing air. The response to 10^?7 mol dm^?3 ABA was similarly reduced in the presence of NaCl. If there is an optimal NaCl concentration for stomatal CO₂ and light responses it is at or below 25 mol m^?3. These findings point towards control of stomatal movements by light, CO₂ and ABA at the level of cation uptake or extrusion.     

Relationship between the wavelength maximum of a protein and the temperature dependence of its intrinsic tryptophan fluorescence intensity

Proper determination of the temperature dependence of intrinsic tryptophan fluorescence intensity in native and denatured states is an essential prerequisite for extracting the free energy of protein unfolding from the thermal denaturation profile. The most common method employed in determining the temperature dependence of these conformations is through the determination of slopes of pre- and post-transition baselines. However, simulations of protein unfolding profiles suggest that this method does not work for marginally stable proteins. We show herein that the temperature dependence of the fluorescence intensity of N-acetyl tryptophanamide (NATA) in organic solvents and water may be used to represent the temperature dependence of the fluorescence intensity of tryptophan in native and denatured conformations of a protein, respectively. The wavelength of the emission maximum, λ _max, of N-acetyl tryptophanamide (NATA) in a particular solvent or tryptophan in proteins is related to the temperature dependence (m) of its fluorescence intensity by the equation: m (K⁻¹) = (−0.000299 ± 2.2 × 10⁻⁵ K⁻¹ nm⁻¹) × λ _max (nm) + (0.0919 ± 0.0025 K⁻¹).     

Effect of bovine growth hormone on rat liver plasma membranes as studied by circular dichroism and fluorescence using the extrinsic probe 7,12-dimethylbenzanthracene

Conformational changes produced by in vitro bovine growth hormone addition to plasma membranes of hypophysectomized rat liver proteins and lipids have been studied by circular dichroism as well as intrinsic and extrinsic fluorescence. 7,12-Dimethylbenzanthracene has been used as a fluorescent probe of changes in membrane structure. The exposure of membranes to bovine growth hormone produced a change in membrane negative ellipticity. Dimethylbenzanthracene at concentrations similar to those employed in fluorescence studies had no effect on the membrane circular dichroism spectrum. Its presence did, however, prevent a response to growth hormone. There was a decrease in peak fluorescence intensity and a peak shift when bovine growth hormone (0.5 · 10^?12 M) was added to liver membranes. The addition of dimethylbenzanthracene (1.6 · 10^?6 M) to membranes resulted in a decrease in the intensity of the protein fluorescence peak at 335 nm and the appearance of two peaks at 430 and 407 nm, assignable to the probe. The addition of bovine growth hormone (0.5 · 10^?12 M) produced a decrease in fluorescence at 335 nm and also in the peaks at 407 and 430 nm. These data are consistent with the conclusion that bovine growth hormone produces a conformational change in rat liver plasma membrane proteins and lipids.     

Interaction of lipoprotein lipase and apolipoprotein C-II with sonicated vesicles of 1,2-ditetradecylphosphatidylcholine: comparison of binding constants

The interaction of lipoprotein lipase (LpL) and its activator protein, apolipoprotein C-II (apoC-II), with a nonhydrolyzable phosphatidylcholine, 1,2-ditetradecyl-rac-glycero-3-phosphocholine (C14-ether-PC), was studied by fluorescence spectroscopy. A complex of 320 molecules of C14-ether-PC per LpL was isolated by density gradient ultracentrifugation in KBr. The intrinsic tryptophan fluorescence emission spectrum of LpL was shifted from 336 nm in the absence of lipid to 330 nm in the LpL-lipid complex; the shift was associated with a 40% increase in fluorescence intensity. Addition of C14-ether-PC vesicles to apoC-II caused a 2.5-fold increase in intrinsic tryptophan fluorescence and a shift in emission maximum from 340 to 317 nm. LpL and apoC-II/C14-ether-PC stoichiometries and binding constants were determined by measuring the increase in the intrinsic tryptophan fluorescence as a function of lipid and protein concentrations; for LpL the rate and magnitude of the fluorescence increases were relatively independent of temperature in the range 4-37 degrees C. A stoichiometry of 270 PC per LpL for the LpL-lipid complex compares favorably with the value obtained in the isolated complex. The dissociation constant (Kd) of the complex is 4.3 X 10(-8) M. For apoC-II, the stoichiometry of the complex is 18 PC per apoprotein, and the Kd is 3.0 X 10(-6) M. These data suggest that LpL binds more strongly than apoC-II to phosphatidylcholine interfaces.     

A fluorescence study of Tn10-encoded Tet repressor

Steady-state fluorescence quenching and time-resolved measurements have been performed to resolve the fluorescence contributions of the two tryptophan residues, W43 and W75, in the subunit of the homodimer of the Tet repressor fromEscherichia coli. The W43 residue is localized within the helix-turn-helix structural domain, which is responsible for sequence-specific binding of the Tet repressor to thetet operator. The W75 residue is in the protein matrix near the tetracycline-binding site. The assignment of the two residues has been confirmed by use of single-tryptophan mutants carrying either W43 or W75. The FQRS (fluorescence-quenching-resolved-spectra) method has been used to decompose the total emission spectrum of the wild-type protein into spectral components. The resolved spectra have maxima of fluorescence at 349 and 324 nm for the W43 and W75 residues, respectively. The maxima of the resolved spectra are in excellent agreement with those found using single-tryptophan-containing mutants. The fluorescence decay properties of the wild type as well as of both mutants of Tet repressor have been characterized by carrying out a multitemperature study. The decays of the wild-type Tet repressor and W43-containing mutant can be described as being of double-exponential type. The W75 mutant decay can be described by a Gaussian continuous distribution centered at 5.0 nsec with a bandwidth equal to 1.34 nsec. The quenching experiments have shown the presence of two classes of W43 emission. One of the components, exposed to solvent, has a maximum of fluorescence emission at 355 nm, with the second one at about 334 nm. The red-emitting component can be characterized by bimolecular-quenching rate constant,k _q equal to 2.6×10⁹, 2.8×10⁹, and 2.0×10⁹ M^?1 sec^?1 for acrylamide, iodide, and succinimide, respectively. The bluer component is unquenchable by any of the quenchers used. The W75 residue of the Tet repressor has quenching rate constant equal to 0.85×10⁹ and 0.28 × 10⁹ M^?1 sec^?1 for acrylamide and succinimide, respectively. These values indicate that the W75 is not deeply buried within the protein matrix. Our results indicate that the Tet repressor can exist in its ground state in two distinct conformational states which differ in the microenvironment of the W43 residue.     

Light-driven sodium transport in sub-bacterial particles of Halobacterium halobium

Light-induced Na⁺ efflux was observed in sub-bacterial particles of Halobacterium halobium loaded and suspended in 4 M NaCl solution. The Na⁺ efflux was not ATP driven, since ATPase inhibitors were without effect or even enhanced efflux at low light intensity. Uncouplers, on the other hand, inhibited Na⁺ efflux, the inhibition being complete at low light intensity. The Na⁺ efflux was accompanied by proton influx. Both processes were dependent on light intensity, unaffected or enhanced by ATPase inhibitors and similarly affected by uncouplers. Proton influx was not observed in particles loaded with 4 M KCl instead of 4 M NaCl. Na⁺ transport in the dark could be induced by artificial formation of a pH difference across the membrane; changing the sign of the pH difference reversed the direction of the Na⁺ transport. Proton influx in the dark followed the artificial formation of a sodium gradient ($\text{[Na}{}^{\mathrm{+}}\text{]}{}_{\mathrm{in}}\text{> [Na}{}^{\mathrm{+}}\text{]}{}_{\mathrm{out}}$). These results may be explained by a Na⁺/H⁺ antiport mechanism. The fluxes of Na⁺ and H⁺ were of comparable magnitude, but the initial rate of Cl^? efflux in the same experiment was one-third of the initial rate of Na⁺ efflux. Consequently Cl^? is not regarded as a participant in the Na⁺ efflux mechanism.     

A blue chemiluminescence in the reaction of umbelliferone with hypochlorite

A strongly fluorescing 7-hydroxycoumarin (umbelliferone, U) oxidized in dilute (10 μmol/L-0, 1 mol/L) aqueous solution with CIO^? or CIO^? + H₂O₂ (but not with H₂O₂ alone) produces a strong chemiluminescence (CL). Light emission kinetics depends on the pH of solution (4.0–10.5) and the reaction has a low activation energy E_a = 31 ± 2 kJ/mol (285–310 K). The spectrum covers the fluorescence of umbelliferone (400–550 nm, λ_max 460nm). No red emission typical of ¹Δg, ¹Σ⁺g (O₂)₂ is observed either in the umbelliferone +CIO^? or the umbelliferone +CIO^? + H₂O₂ solution. The possible mechanism of CL and concomitant degradative oxidation of umbelliferone is discussed.