The Role of Flow Velocity in the Vertical Distribution of Particulate Organic Matter on Moss-covered Travertine Barriers of the Plitvice Lakes (Croatia)

We investigated the distribution patterns of particulate organic matter (POM) on travertine barriers in respect to flow velocity. Research was conducted on the barrage-lake system of the Plitvice Lakes, Croatia. Four layers were distinguished within the substrate (moss mat + three travertine layers) in three hydraulic habitats at three sites. Substrate samples were collected monthly with a core sampler. The aim of the study was to explore the ability of moss mats and travertine substrate to accumulate POM; to ascertain the role of flow velocity and to produce a model of POM distribution pattern. The average of POM deposited in the 10 cm deep zone decreased significantly in the three sites along longitudinal profile of the system. Most POM was deposited in the moss mats, and the amounts decreased exponentially with depth. This was observed for coarse particulate organic matter (CPOM), ultra-fine particulate organic matter (UPOM) and total organic matter (TPOM) while fine organic matter (FPOM) deposition appeared unaffected by depth. More POM was accumulated in hydraulic habitats of low flow velocity. Correlation between flow velocity and POM accumulation was generally negative. Positive correlations between flow velocity and deposition rates were noted for CPOM in moss mats and top travertine layers; the deposition of other POM fractions was negatively influenced by the flow velocity. The influence of flow velocity decreased with increasing depth. In the deepest layers (7–10 cm) flow velocity influenced only the deposition of the smallest particles (UPOM).     

A moorable,automated plankton sampler

A moorable, automated plankton sampler is described, designed to obtain series of plankton samples over extended time periods in the absence of a surface vessel. The sampler consists of one or more net-containing boxes, a unit for generating as well as measuring water flow through the net boxes, a programmeable control unit, and a frame. Each net box contains several nets on a vinyl strip, used to move the nets from the storage chamber into the fishing position and then into the preservative chamber. Preservation of samples is in a formalin-brine mixture.Net boxes can be added and the number of nets per box changed; the prototype is described with 1 net box with 10 nets. Volume of water to be filtered, time between sample collections, number of net boxes and the number of nets in each box is programmed into the control unit before sampler deployment. Collections made with the sampler are compared with those made with a SCOR net and a pump.     

The impact of aquatic macrophyte (Salix sp. and Cladium mariscus (L.) Pohl.) removal on habitat conditions and macroinvertebrates of tufa barriers (Plitvice Lakes, Croatia)

The effects of aquatic macrophyte (willows and sawgrass) removal on flow velocity, tufa deposition, POM dynamics, and macroinvertebrate community structure were studied in the tufa barrier habitats of the barrage system of Plitvice Lakes, Croatia. Samples were collected from two hydraulic habitats (fast > 100 cm s⁻¹ and slow < 100 cm s⁻¹) at both a control (no macrophytes removed) and impact (macrophytes removed) site. Samples were collected with a core sampler (four layers in vertical profile of barrier bed) monthly on 6 dates before and 7 dates after the removal of macrophytes. Macrophytes were removed in May 2002 at the impact site. After the macrophyte removal flow velocity decreased significantly at both hydraulic habitats. Retarded flow resulted in: (a) a decrease in macroinvertebrate density and diversity since most of the taxa were rheophilic (preferring habitats with higher flow velocity) and (b) an increase in POM concentrations (FPOM and UPOM) since decreases in flow velocity facilitate particle deposition in lotic habitats. The effects of macrophyte removal were present, and diminish along the vertical sediment profile of the barrier bed. Tufa deposition was not influenced by the macrophyte removal. Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users.     

An efficient and quantitative aquatic benthos sampler for use in diverse habitats with variable flow regimes

A suction sampler designed to minimize sampling error, and quantitatively collect benthic macroinvertebrates from coarse substrata under various flow regimes is described. This sampler uses a 12 V bilge pump (capacity 4400 1 h^–1) to suck animals into a collecting net from substrata disturbed by a single operator. Macroinvertebrates were collected more rapidly by this sampler than by a Surber sampler or a Boulton suction sampler. Sources of sampling error are discussed for all three samplers. The electric pump sampler described here is suitable for sampling habitats where depth and velocity vary spatially and with time.     

Clinical Chemical Comparative Examination of Ruminal Samples Collected by Means of a Naso-Ruminal Sampler

Samples of ruminal fluid collected with the COMET naso-ruminal sampler and by two other methods through fistula were subjected to comparative clinical chemical examination. It was found that the mean values of pH and buffer capacity were nearly identical for all three methods. The greatest variation between the methods were found for reduction time of methylene blue owing to different dry matter contents in the samples. The VFA contents were nearly identical in all three samples. In conclusion, it was found that it is possible to obtain ruminal samples that are representative of the biochemical status in the rumen by means of the COMET naso-ruminal sampler in non-fistulated cows.     

A method for the rapid,automated filtration of protein hydrolyzates

A method for the automated filtration of protein hydrolyzates prior to amino acid analysis is described. Minor modification of a Technicon Sampler II enables it to function simultaneously as a sampler and a filtrate collector. Samples are drawn from cups in the sampler tray and are forced through a Teflon filter (pore size, 0.2 μm) in a Millipore Swinnex filter holder by a variable-speed Technicon proportioning pump. The filtrates are collected in cups in the sampler tray opposite those containing unfiltered hydrolyzates. Using this technique, 12 hydrolyzates can be filtered in 25 min compared to the approximately 2 h of technician time required for their manual filtration. Aliquots from each of 48 samples representing different proteins and hydrolysis conditions are filtered manually and by the automated technique. Analysis of variance of the resulting recoveries of each amino acid indicate little likelihood of effects due to filtration method.     

A quantitative sampler for collecting invertebrates associated with deep submerged vegetation

Only few of the numerous samplers for collecting invertebrate fauna associated with vegetation permit sampling at depths of more than approximately 0.5 m. This paper describes a sampler allowing collection of epifauna from submerged plants at a depth of up to approximately 2 m, growing in varied densities. The sampler is composed of two panels made of duralumin, connected on one side by means of piano-hinges. One of the panels has an opening covered with mesh, and the other is equipped with a cone-shaped net and detachable sample concentrator at its end. The sampler is coupled with a manipulator with a several meter extension for lowering the sampler under water, as well as for its opening, and closing. The initial assessment of the sampler efficiency, verified in beds of Potamogeton perfoliatus, provided similar results as two other, older and commonly used samplers. In comparison with the older devices, the sampler has the advantage of permitting collecting samples from greater depths. It also enables studying both the vertical and horizontal distribution of invertebrates within a plant patch.     

A simple water sampler, and a chamber for in situ incubation of plankton samples at discrete depths

• 1 A simple water sampler and an incubation chamber are presented. The water sampler is simpler in construction than the Ruttner sampler and other comparable devices. In addition to enclosure of water at a discrete depth, the incubation chamber releases a radioisotope or other substance of experimental interest into the sample.
• 2 Tests of performance are presented, demonstrating efficiency in enclosure of water from discrete depths, and time course of mixing of a tracer into the sample after activation of the release mechanism.

     

A pneumatically-operated water sampler for close intervals of depth

A pneumatically-operated sampler for collecting water samples at close intervals of depth in lakes is described. The sampler uses plastic disposable syringes and may be operated at various depths and at the mud-water interface. Examples of results obtained with the sampler are given.     

Comparison of two biological aerosol sampling methods.

Two biological aerosol samplers, the Andersen two-stage microbial impactor and the May three-stage glass impinger, were examined to determine the benefits and effectiveness of the May sampler compared with the Andersen sampler, one of the most widely accepted samplers. Side-by-side samples were collected during simulated wastewater spray irrigation dispersion studies. Escherichia coli colony counts and air concentrations were statistically treated to determine the dependability of the May results with respect to the Andersen results. After data pairs containing potentially overloaded Andersen counts were eliminated, a linear regression of the remaining data was performed. It indicates that although the May sampler reports 82% of the Andersen sampler value, the correlation between the two samplers is good with an r2 value of 0.84. This comparison indicates that although there are differences between the two samplers, they do give comparable results and that when both are used in a sampling program, they tend to complement each other.     

Comparison of two biological aerosol sampling methods

Two biological aerosol samplers, the Andersen two-stage microbial impactor and the May three-stage glass impinger, were examined to determine the benefits and effectiveness of the May sampler compared with the Andersen sampler, one of the most widely accepted samplers. Side-by-side samples were collected during simulated wastewater spray irrigation dispersion studies. Escherichia coli colony counts and air concentrations were statistically treated to determine the dependability of the May results with respect to the Andersen results. After data pairs containing potentially overloaded Andersen counts were eliminated, a linear regression of the remaining data was performed. It indicates that although the May sampler reports 82% of the Andersen sampler value, the correlation between the two samplers is good with an r2 value of 0.84. This comparison indicates that although there are differences between the two samplers, they do give comparable results and that when both are used in a sampling program, they tend to complement each other.     

A simple periphyton sampler for algal biomass estimates in streams

• 1 A simple periphyton sampler, which is cheap and easy to construct, is described. The key component is a disposable scouring disc which also serves to adsorb detached material.
• 2 Field trials show that the scouring sampler is significantly more efficient at removing and retaining periphyton from stones in streams for biomass estimation than other commonly used techniques.
• 3 The scouring sampler requires only one operator. Its small size and speed of use facilitate replication of samples. Samples can be collected from stones as small as 30mm diameter.

     

Verfahren und Analysenautomat zur Bestimmung von Nährlösungskomponenten und Stoffwechselprodukten

A continuous flow system with an enzyme electrode and with a new type of measuring instrument, the BIOXY-Meter, is described as an example for the determination of glucose. The BIOXY-Meter combined with various biosensors may be used in biotechnology and in other fields for the solution of a number of analytical problems. Measuring principle is the reduction of oxygen. The peak of first derivation of the current-time-curve is proportional to oxygen consumption and to decrease of substrate concentration. Enzyme fixation with common adhesive and a device for automated saturation of measuring samples with air in the sampler are also described. With the apparatus 60 samples per hour are analyzed for glucose. The linear measuring range is 0.1 mMol to 1.5 mMol with a coefficient of variation of V_k = 0.93 per cent. The described type of enzyme electrode is stable for 2 to 12 weeks or 1,000 to 5,000 measurements.     

A new quantitative air-lift sampler for collecting macroinvertebrates on stony bottoms in deep rivers

SUMMARY. 1. As three previous comparative studies of deep-water samplers for benthic macroinvertebrates in rivers highlighted the need for a quantitative sampler for use on stony substrata, a new air-lift sampler was developed. It can be operated from a small boat by two people, weighs 13.5–20.0 kg, depending on the length of riser used, and extends the maximum range of substrata that may be sampled quantitatively from 16–32 mm to 128—256 mm. The sampling area is isolated by forcing a collecting cylinder into the substratum, and rapid evacuation of the contents is assisted by a vibrator.
2. All the major specifications of the sampler were determined experimentally in a large tank using three sizes of substrata and plastic pellets to represent invertebrates. The sampler performed accurately to a depth of at least 8 cm on substrata ranging from gravel (2–4 mm) to large stones (32–36 mm long).
3. The performance of the sampler was compared with that of a Ponar grab and Pearson el at. air-lift sampler at two sites on a large river and also with a Naturalist's dredge and a diver-operated Hess-Waters sampler at one of the sites where there were large stones up to 280 mm long. In terms of both mean taxa per sample and mean numbers m⁻², samples taken using the new air-lift sampler provided estimates comparable to or belter than those obtained with the other samplers.     

Depth integrating samplers for use in limnocorrals

Constructional details of a zooplankton and a phytoplankton sampler are given. Both samplers are designed for use in shallow limnocorrals (5 m deep enclosures) and both give samples integrated with respect to depth and offer a considerable saving in time over other sampling methods.     

Description of a new automatic plankton sampler that collects and preserves multiple samples over a period of several days

A new automated plankton sampler is described that collects, compartmentalizes and preserves up to twelve individual samples, from any depth up to 400 meters, in fast or slow flowing waters. The unit combines the already well established features characteristic of other modern samplers but offers many distinct advantages. The O'Hara sampler features a novel fully automated self generating flow through system that is electronically preset by the operator, and upon submergence need not be retrieved for a period up to several days. The unit is simple in its design and challenging in its applications for use in pure and applied scientific research.     

Modification of a freshwater sampler using evacuated tubes for microbial collections

The modification of a freshwater sampler utilizing three evacuated tubes for the collection of microbial samples is described. To avoid contamination sterile hypodermic needles covered with rubber sleeves are inserted into the evacuated tubes prior to lowering the sampler. At the requisite depth each sleeve is pushed down over the end of the needle so that the tubes fill with water.     

A comparative study of three air-lift samplers used for sampling benthic macro-invertebrates in rivers

SUMMARY. From 16 air-lift samplers described in the literature, three were selected for operation from a small boat: Mackey, Pearson et al. and Verollet & Tachet samplers. Random samples (number of sampling units n= 10) were taken in a large tank with a known number of dried peas, representing invertebrates, amongst stones of uniform size. Separate experiments were performed with three sizes of stones (modal sizes 2–4, 16–20 and 32–36 mm). Stratified-random samples (usually n= 10) were taken in rivers at lour sites with modal particle sizes of < 0.1 2–4. 32–128 and 64–128 mm. The samplers were compared with a Ponar grab in the tank experiments and the field, and with a Naturalist's dredge in the field. Rates of pumping at different air-flows were established for each sampler. Water-How increased with increasing air-How and increasing submergence of the riser-pipe. The Mackey sampler achieved the highest water-flow and lifted more substratum and larger stones (64–128 mm) than the other samplers. The Verollet & Tachet sampler had the lowest pumping rate and failed to lift stones > 8 mm long, whilst the Pearson et al. sampler, with an intermediate performance, lifted mud and stones < 32 mm long. In the tank experiments, the area from which the Mackey and Pearson et al. samplers collected peas varied with air-flow, operating time and type of substratum. The Maekey sampler over-sampled and the Pearson et al. sampler usually under-sampled their respective sampling areas, except the latter sampler at high air-flows gave approximately quantitative results comparable to those of the Ponar grab for peas on the surface of stones 16–20 mm. No sampler collected much at a depth of 3 cm on larger stones (32–36 mm), and the Verollet & Tachet sampler failed completely on all substrata. In field trials, the Mackey and Pearson et al. samplers provided good qualitative samples except on large stones (32–128mm). The Verollet & Tachet sampler lifted little material. The relative abundance of taxa often differed between samplers. Estimates of the number of invertebrates per m² differed widely between samplers except for the Pearson et al. and Ponar grab which gave similar quantitative results at three sites. Values were very low for the Verollet & Tachet sampler and Naturalist's dredge and always very high for the Mackey sampler which often grossly over-sampled its sampling area. Therefore, these three samplers cannot be considered as quantitative. The relationship between the variances and the means of samples of peas in the tank and most invertebrates in the field followed a power law with values of the exponent b in the range 1.13–2.51. The present study completes the evaluation of 14 samplers used to sample benthic macro-invertebrates in deep rivers, and the more important conclusions from the comparative studies of seven grabs, four dredges and three air-lift samplers are summarized in a table.     

Microcomputer monitor and blood sampler for free-diving Weddell seals

The equipment used for the first sampling of arterial blood at depth on free-diving Weddell seals Leptonychotes weddelli is described. Blood was withdrawn through an aortic catheter by a submersible, peristaltic roller pump and stored in a single- or multiple-sample collection device. The multiple sampler allowed up to eight individual blood samples to be collected during a single dive. The blood pump was controlled by a dedicated microcomputer that allowed initiation of blood sampling at flexible combinations of depth and/or time during either the descending or ascending phase of the dive. The dedicated microcomputer also recorded swimming depth, velocity, heart rate, and body temperature at selectable time intervals. These data were transmitted to a laboratory computer, and blood samples were retrieved, when the seal surfaced to breathe.     

A portable, low-cost, multipurpose, surface-subsurface plankton sampler

This note describes a portable, low-cost, pump-based, multi-purpose,surface–subsurface, phytoplankton and zooplankton sampler.It is self-powered by a small 12 V DC battery, and is portableand ideal for use from a small boat in a river, estuary, orsea. The sampler is equipped with a very sensitive microprocessor-controlledflow sensor for precise determination of the volume of waterprocessed by the sampler. A study was carried out to evaluatethe performance of this sampler in comparison to the conventionaltowed plankton net. The results of this study suggest that thispump-based sampler is as efficient in collecting plankton asusing conventional plankton nets, with little damage to theorganisms.