Fate of Fumonisin B(1) in Naturally Contaminated Corn during Ethanol Fermentation

Two lots of corn naturally contaminated with fumonisin B(1) (15 and 36 ppm) and a control lot (no fumonisin B(1) detected) were used as substrates for ethanol production in replicate 8.5-liter yeast fermentations. Ethanol yields were 8.8% for both the control and low-fumonisin corn, while the high-fumonisin corn contained less starch and produced 7.2% ethanol. Little degradation of fumonisin occurred during fermentation, and most was recovered in the distillers' grains, thin stillage, and distillers' solubles fractions. No toxin was detected in the distilled alcohol or centrifuge solids. Ethanol fermentation of fumonisin-contaminated corn coupled with effective detoxification of distillers' grains and aqueous stillage is suggested as a practical process strategy for salvaging contaminated corn.     

New technologies in value addition to the thin stillage from corn-to-ethanol process

Grain-to-ethanol production has increased steadily in the United States in the past few decades, which resulted in remarkable records in the availability of co-products. Dry-grind is the most common method of ethanol production worldwide, which concentrates the corn and yeast nutrients in the downstream operations. The ethanol co-products have traditionally been a commodity for livestock feed as they contain desirable nutrients, mostly sold as distiller’s grains. The liquid fraction produced after the centrifugation of the bottoms of the ethanol rectifying and distilling operations is named thin stillage, produced at volumes several times greater than those of ethanol. A portion of thin stillage is normally recycled as backset water, while the remaining goes through a series of evaporations. Evaporating a large amount of water from thin stillage is an energy-consuming process and recycling the thin stillage may lead to the accumulation of nutrients in co-products in distiller’s grains. There are several other industrial processes to utilize thin stillage, such as oil extraction, anaerobic digestion, and secondary fermentation. Recently, promising results have been reported on the production of important commodity chemicals, extracting high-value products, and energy production from thin stillage. This review provides an overview on the new processes and products via valorization of thin stillage by innovative technologies that are being currently developed. The new applications of thin stillage discussed in this review could open new opportunities for the ethanol plants and ethanol researchers by increasing the revenue and simultaneously reducing negative environmental impacts of ethanol production.     

废糟液全循环条件下絮凝酵母乙醇连续发酵

丙酸是以玉米为原料自絮凝酵母乙醇连续发酵系统废糟液全循环过程中积累的主要抑制物。基于丙酸对酵母细胞抑制机理,开发了3种废糟液全循环条件下乙醇连续发酵工艺策略。首先根据高温导致丙酸生成的现象,去除了物料灭菌环节,使发酵液丙酸浓度显著降低,生物量和乙醇浓度分别提高了59.3%和7.4%。其次,以丙酸浓度达到半数抑制浓度(IC50)40 mmol/L为目标,通过拟合丙酸积累数据预测废糟液全循环的最长运行时间,发酵装置运行应控制在此时间范围内。再次,较低的环境pH值提高了丙酸毒性,而实验证明发酵液pH为5.5时,丙酸对细胞生长的抑制影响最小,因此控制发酵过程中的pH有利于弱化丙酸毒性。     

Fate of Fumonisin B1 in Naturally Contaminated Corn during Ethanol Fermentation

Two lots of corn naturally contaminated with fumonisin B₁ (15 and 36 ppm) and a control lot (no fumonisin B₁ detected) were used as substrates for ethanol production in replicate 8.5-liter yeast fermentations. Ethanol yields were 8.8% for both the control and low-fumonisin corn, while the high-fumonisin corn contained less starch and produced 7.2% ethanol. Little degradation of fumonisin occurred during fermentation, and most was recovered in the distillers' grains, thin stillage, and distillers' solubles fractions. No toxin was detected in the distilled alcohol or centrifuge solids. Ethanol fermentation of fumonisin-contaminated corn coupled with effective detoxification of distillers' grains and aqueous stillage is suggested as a practical process strategy for salvaging contaminated corn.     

Production of cellulosic ethanol and enzyme from waste fiber sludge using SSF,recycling of hydrolytic enzymes and yeast,and recombinant cellulase-producing Aspergillus niger

Bioethanol and enzymes were produced from fiber sludges through sequential microbial cultivations. After a first simultaneous saccharification and fermentation (SSF) with yeast, the bioethanol concentrations of sulfate and sulfite fiber sludges were 45.6 and 64.7 g/L, respectively. The second SSF, which included fresh fiber sludges and recycled yeast and enzymes from the first SSF, resulted in ethanol concentrations of 38.3 g/L for sulfate fiber sludge and 24.4 g/L for sulfite fiber sludge. Aspergillus niger carrying the endoglucanase-encoding Cel7B gene of Trichoderma reesei was grown in the spent fiber sludge hydrolysates. The cellulase activities obtained with spent hydrolysates of sulfate and sulfite fiber sludges were 2,700 and 2,900 nkat/mL, respectively. The high cellulase activities produced by using stillage and the significant ethanol concentrations produced in the second SSF suggest that onsite enzyme production and recycling of enzyme are realistic concepts that warrant further attention.     

Stillage backset and its impact on ethanol fermentation by the flocculating yeast

The second largest cost in fuel ethanol production is from energy consumption with ethanol distillation and stillage treatment, particularly when stillage is treated by the multi-evaporation process. Therefore, stillage backset is the most economically competitive strategy for reducing discharge and saving energy consumption. In this article, continuous ethanol fermentation was performed by the flocculating yeast under stillage backset conditions. Compared to regular yeast, immobilized yeast within the fermentor through flocculation reduced byproducts formation in the stillage, since heat lysis of yeast during ethanol distillation was prevented, and many side reactions were thus eliminated, making more stillage backset within the fermentation system possible. Although pyruvic acid, succinic acid, citric acid, α-ketoglutaric acid, fumaric acid and glycerol from yeast metabolism, furfural and 5-hydroxymethyl furfural from process operations, and acetic acid and lactic acid from slight contamination were accumulated with the stillage backset, they had no significant impact on yeast growth and ethanol fermentation due to low concentrations accumulated within the fermentation system. However, propionic acid that was generated mainly during hydrolysate sterilization and distillation of the fermentation broth was detected as the major inhibitor, but this byproduct would be significantly reduced under industrial conditions without hydrolysate sterilization, making the stillage backset more reliable for industrial application.     

Feasibility of ethanol production from coffee husks

The objective of this work was to evaluate the feasibility of ethanol production by fermentation of coffee husks by Saccharomyces cerevisiae. Batch fermentation studies were performed employing whole and ground coffee husks, and aqueous extract from ground coffee husks. It was observed that fermentation yield decreased with an increase in yeast concentration. The best results were obtained for the following conditions: whole coffee husks, 3 g yeast/l substrate, temperature of 30°C. Under these conditions ethanol production was 8.49 ± 0.29 g/100 g dry basis (13.6 ± 0.5 g ethanol/l), a satisfactory value in comparison to literature data for other residues such as corn stalks, barley straw and hydrolyzed wheat stillage (5–11 g ethanol/l). Such results indicate that coffee husks present excellent potential for residue-based ethanol production.     

Energy consumption and greenhouse gas emissions from enzyme and yeast manufacture for corn and cellulosic ethanol production

Enzymes and yeast are important ingredients in the production of ethanol, yet the energy consumption and emissions associated with their production are often excluded from life-cycle analyses of ethanol. We provide new estimates for the energy consumed and greenhouse gases (GHGs) emitted during enzyme and yeast manufacture, including contributions from key ingredients such as starch, glucose, and molasses. We incorporated these data into Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation model and observed that enzymes and yeast together contribute 1.4 and 27?% of farm-to-pump GHG emissions for corn and cellulosic ethanol, respectively. Over the course of the entire corn ethanol life cycle, yeast and enzymes contribute a negligible amount of GHG emissions, but increase GHG emissions from the cellulosic ethanol life cycle by 5.6?g CO₂e/MJ.     

Impact of recycling stillage on conversion of dilute sulfuric acid pretreated corn stover to ethanol

Both the current corn starch to ethanol industry and the emerging lignocellulosic biofuels industry view recycling of spent fermentation broth or stillage as a method to reduce fresh water use. The objective of this study was to understand the impact of recycling stillage on conversion of corn stover to ethanol. Sugars in a dilute‐acid pretreated corn stover hydrolysate were fermented to ethanol by the glucose–xylose fermenting bacteria Zymomonas mobilis 8b. Three serial fermentations were performed at two different initial sugar concentrations using either 10% or 25% of the stillage as makeup water for the next fermentation in the series. Serial fermentations were performed to achieve near steady state concentration of inhibitors and other compounds in the corn stover hydrolysate. Little impact on ethanol yields was seen at sugar concentrations equivalent to pretreated corn stover slurry at 15% (w/w) with 10% recycle of the stillage. However, ethanol yields became progressively poorer as the sugar concentration increased and fraction of the stillage recycled increased. At an equivalent corn stover slurry concentration of 20% with 25% recycled stillage the ethanol yield was only 5%. For this microorganism with dilute‐acid pretreated corn stover, recycling a large fraction of the stillage had a significant negative impact on fermentation performance. Although this finding is of concern for biochemical‐based lignocellulose conversion processes, other microorganism/pretreatment technology combinations will likely perform differently. Biotechnol. Bioeng. 2010;105: 992–996. © 2009 Wiley Periodicals, Inc.     

Thin stillage fractionation using ultrafiltration: resistance in series model

The corn based dry grind process is the most widely used method in the US for fuel ethanol production. Fermentation of corn to ethanol produces whole stillage after ethanol is removed by distillation. It is centrifuged to separate thin stillage from wet grains. Thin stillage contains 5–10% solids. To concentrate solids of thin stillage, it requires evaporation of large amounts of water and maintenance of evaporators. Evaporator maintenance requires excess evaporator capacity at the facility, increasing capital expenses, requiring plant slowdowns or shut downs and results in revenue losses. Membrane filtration is one method that could lead to improved value of thin stillage and may offer an alternative to evaporation. Fractionation of thin stillage using ultrafiltration was conducted to evaluate membranes as an alternative to evaporators in the ethanol industry. Two regenerated cellulose membranes with molecular weight cut offs of 10 and 100 kDa were evaluated. Total solids (suspended and soluble) contents recovered through membrane separation process were similar to those from commercial evaporators. Permeate flux decline of thin stillage using a resistance in series model was determined. Each of the four components of total resistance was evaluated experimentally. Effects of operating variables such as transmembrane pressure and temperature on permeate flux rate and resistances were determined and optimum conditions for maximum flux rates were evaluated. Model equations were developed to evaluate the resistance components that are responsible for fouling and to predict total flux decline with respect to time. Modeling results were in agreement with experimental results (R ² > 0.98).     

Contamination issues in a continuous ethanol production corn wet milling facility

Low ethanol yields and poor yeast viability were investigated at a continuous ethanol production corn wet milling facility. Using starch slurries and recycle streams from a commercial ethanol facility, laboratory hydrolysates were prepared by reproducing starch liquefaction and saccharification steps in the laboratory. Fermentations with hydrolysates prepared in the laboratory were compared with plant hydrolysates for final ethanol concentrations and total yeast counts. Fermentation controls were prepared using hydrolysates (plant and laboratory) that were not inoculated with yeast. Hydrolysates prepared in the laboratory resulted in higher final ethanol concentrations (15.8 % v/v) than plant hydrolysate (13.4 % v/v). Uninoculated controls resulted in ethanol production from both laboratory (12.2 % v/v) and plant hydrolysates (13.7 % v/v), indicating the presence of a contaminating microorganism. Yeast colony counts on cycloheximide and virginiamycin plates confirmed the presence of a contaminant. DNA sequencing and fingerprinting studies also indicated a number of dissimilar communities in samples obtained from fermentors, coolers, saccharification tanks, and thin stillage.     

Effect of corn preparation methods on dry-grind ethanol production by granular starch hydrolysis and partitioning of spent beer solids

Two corn preparation methods, rollermill flaking and hammermill grinding, were compared for efficient processing of corn into ethanol by granular starch hydrolysis and simultaneous fermentation by yeast Saccharomyces cerevisiae. Corn was either ground in a hammermill with different size screens or crushed in a smooth-surfaced rollermill at different roller gap settings. The partitioning of beer solids and size distribution of solids in the thin stillage were compared. The mean particle diameter d₅₀ for preparations varied with set-ups and ranged between 210 and 340 μm for ground corn, and 1180-1267 μm for flaked corn. The ethanol concentrations in beer were similar (18-19% v/v) for ground and flaked preparations, however, ethanol productivity increased with reduced particle size. Roller versus hammermilling of corn reduced solids in thin stillage by 28%, and doubled the volume percent of fines (d₅₀ ∼ 7 μm)in thin stillage and decreased coarse (d₅₀ ∼ 122 μm) by half compared to hammermilling.     

Processing cereal grains,thin stillage,and cheese whey to fuel ethanol in a farm-scale plant

Hydrous fuel ethanol (95%) and distiller's wet grain (DWG) were produced in a farm-scale plant (< 4 million liters ethanol year⁻¹) from corn, wheat, and grain sorghum particles of various sizes, from corn combined with thin stillage-whey, and from various other cereal grains. These variations were made in a search to find the best set of conditions for maximizing the energy balance (energy output divided by energy input) and minimizing the cost of ethanol production. We found that the optimum hammermill screen size for corn, wheat, and grain sorghum was 1·59–2·38 mm. In tests with thin stillage and whey a higher energy balance (2·91) occurred when one part whey was mixed with three parts stillage, rather than the reverse (2·69). However, the reverse (three parts whey and one part stillage) gave a lower ethanol cost ($0.45 liter⁻¹) than the original ($0.47 liter⁻¹). Tests with various cereal grains (corn, oats, wheat, barley, rye, and grain sorghum) gave identical energy balance values (2·26) when 10% (v/v) ethanol beers were produced. However, rye ($0.50 liter⁻¹), grain sorghum ($0.46 liter⁻¹), and corn ($0.51 liter⁻¹) yielded ethanol at the lowest net cost. Recommendations for farm-scale plants are also provided.     

Production of carotenoids byPhaffia rhodozyma grown on media composed of corn wet-milling co-products

Summary Natural isolates of the carotenoid-producing yeastPhaffia rhodozyma were analyzed for their ability to grow and to produce carotenoids in culture media composed exclusively of co-products of corn wet-milling for fuel ethanol production. FiveP. rhodozyma strains were tested for biomass produced (dry weight) and carotenoid yield. Six co-products were examined, ranging in cost from approximately $0.02 per kg to $0.11 per kg, all less expensive than conventional or agricultural growth substrates previously tested. The three co-products allowing the greatest accumulation of biomass and carotenoids byP. rhodozyma were thin stillage (TS), corn condensed distiller's solubles (CCDS) and corn gluten feed (CGF). Of the medium compositions tested, 10–15% CGF, 70% TS and 6–8% CCDS generally allowed maximum carotenoid production. Cultures grown in these three media produced up to 65%. 148% and 104% of the carotenoid yield per ml of yeast extract/malt extract (YM) cultures, respectively. Under the conditions tested, this was at an approximate medium cost of $0.67 per g carotenoids for CCDS and $0.73 per g for CGF as compared to $385.00 per g for YM. These results indicate that certain co-products of corn wet-milling can serve, at the appropriate concentration, as efficient, economical substrates for growth and carotenoid production byPhaffia rhodozyma.The mention of firm names or trade products does not imply that they are endorsed or recommended by the US Department of Agriculture over other firms or similar products not mentioned.     

Corn fiber hydrolysis by<Emphasis Type="Italic"> Thermobifida fusca</Emphasis> extracellular enzymes

Thermobifida fusca was grown on cellulose (Solka-Floc), xylan or corn fiber and the supernatant extracellular enzymes were concentrated. SDS gels showed markedly different protein patterns for the three different carbon sources. Activity assays on a variety of synthetic and natural substrates showed major differences in the concentrated extracellular enzyme activities. These crude enzyme preparations were used to hydrolyze corn fiber, a low-value biomass byproduct of the wet milling of corn. Approximately 180 mg of reducing sugar were produced per gram of untreated corn fiber. When corn fiber was pretreated with alkaline hydrogen peroxide, up to 429 mg of reducing sugars were released per gram of corn fiber. Saccharification was enhanced by the addition of beta-glucosidase or by the addition of a crude xylanase preparation from Aureobasidium sp.     

Direct and efficient ethanol production from high-yielding rice using a Saccharomyces cerevisiae strain that express amylases

Efficient ethanol producing yeast Saccharomyces cerevisiae cannot produce ethanol from raw starch directly. Thus the conventional ethanol production required expensive and complex process. In this study, we developed a direct and efficient ethanol production process from high-yielding rice harvested in Japan by using amylase expressing yeast without any pretreatment or addition of enzymes or nutrients. Ethanol productivity from high-yielding brown rice (1.1g/L/h) was about 5-fold higher than that obtained from purified raw corn starch (0.2g/L/h) when nutrients were added. Using an inoculum volume equivalent to 10% of the fermentation volume without any nutrient supplementation resulted in ethanol productivity and yield reaching 1.2g/L/h and 101%, respectively, in a 24-h period. High-yielding rice was demonstrated to be a suitable feedstock for bioethanol production. In addition, our polyploid amylase-expressing yeast was sufficiently robust to produce ethanol efficiently from real biomass. This is first report of direct ethanol production on real biomass using an amylase-expressing yeast strain without any pretreatment or commercial enzyme addition.     

Farm-scale production of fuel ethanol and wet grain from corn in a batch process

The batch production of fuel grade ethanol and distillers' wet grain (wet solids) in a farm-scale process (1240-15,580 L/batch) is described. The employs yeast fermentation of amylase-treated corn mash and a two-stage distillation. Primary emphasis in this study was on the cooking, fermentation, and centrifugation steps. Without recycling, fermentation of the mash yield beers with 10.0-10.5% ethanol. Recycling of stillage supernatant at full, 75, or 50% strengths produced enriched mashes that after 48-h fermentation yielded beers with 5-;14% more ethanol. Recycling twice with full-strength supernatant at pH 7.0 increased the ethanol yield in the final beer 16.5%; however, the time to complete the final fermentation was extended form 48 to 72 h and salt buildup occurred. By recycling at pH 5.4, it was possible to avoid rapids salt buildup and obtain beers with 10.3-10.5% ethanol. Recycling resulted in increased levels of glucose, starch, crude protein, and fat in the beer and a reduced moisture content while the wet solids showed an increased starch content. Centrifugation after cooking or fermentation yield in the subsequently produced beer. Fermentation of a volume-resorted mash supernatant gave a beer with only 9.25% ethanol. Mash wet solids varied somewhat chemically from beer and stillage solids. An economic and energy balance analysis of various modes of plant operation are provided and plant considerations are suggested.     

Corn fiber as a raw material for hemicellulose and ethanol production

Corn fiber (CF) is a potential raw material for the production of various products because it is widely available in corn-producing countries. Corn fiber is a byproduct of the corn wet-milling industry and a very large amount of it (approximately 130 t/day) is produced in Hungary. The major component of corn fiber is the pericarp that consists of 35% hemicellulose, 18% cellulose and 20% remaining starch (protein, fiber oil and lignin are also present in this material). Corn fiber is presently used as animal feed. However, with continuous growth in corn processing to ethanol, there might be problems with the utilization of the surplus fibrous byproducts. In this paper the conversion of corn fiber to ethanol or other products was examined. Destarched corn fiber was pretreated by using different alkaline solutions and dissolved hemicellulose was precipitated with ethanol for the recovery of a valuable coproduct. The residual material consisting mostly of cellulose was hydrolyzed with cellulolytic enzymes and fermented into ethanol by using Saccharomyces cerevisiae.     

Isolation of astaxanthin-overproducing mutants of Phaffia rhodozyma

We isolated mutants of Phaffia rhodozyma strain NRRL Y-17269 that overproduced astaxanthin when grown on corn-based fuel ethanol stillage (thin stillage, TS, or fuel ethanol byproducts). Ten ml cultures of mutant strain JB2 produced 1.54 ± 0.21 mg carotenoid/mg dry weight when grown on 70% thin stillage at pH 5.2, compared with 0.38 ± 0.04 g/mg produced by the parental strain. Furthermore, JB2 produced similar astaxanthin concentrations when grown in either thin stillage or yeast malt broth. By comparison, previously described astaxanthin overproducing strain NRRL Y-17811 yielded 1.08 ± 0.07 g/mg in yeast malt broth but only 0.67 ± 0.03 g/mg in thin stillage. Five liter fermentation experiments using JB2 grown on 70% thin stillage at pH 5.2 yielded 2.01 ± 0.17 g/mg astaxanthin. Thus, JB2 is uniquely suited for astaxanthin production from low cost thin stillage.     

Evaluation of Simultaneous Saccharification and Ethanol Fermentation of Undetoxified Steam-Exploded Corn Stover by Saccharomyces cerevisiae Y5

Toxin-tolerant yeast strains that produce high ethanol yield are inevitably requited for cost-effective ethanol production from undetoxified steam-exploded corn stover. To verify the ethanol-producing capability of the strain Saccharomyces cerevisiae Y5 developed in our laboratory, simultaneous saccharification and fermentation of undetoxified steam-exploded corn stover with solids loading of 30 % (w/v) was carried out in different-sized flasks and an automatic fermenter. After 96 h, the ethanol concentrations had reached 50, 47.8, and 47.5 g/L in the 100-mL flask, 3,000-mL flask, and 5-L automatic fermenter, respectively. The experiment demonstrates that ethanol production from undetoxified steam-exploded corn stover using S. cerevisiae Y5 simplifies the production process, reduces equipment investment and water consumption, and generates highly concentrated ethanol. S. cerevisiae Y5 is a promising strain that could reduce the cost of producing ethanol from steam-exploded corn stover.