Preparation and Use of Photocatalytically Active Segmented Ag|ZnO and Coaxial TiO2-Ag Nanowires Made by Templated Electrodeposition

Photocatalytically active nanostructures require a large specific surface area with the presence of many catalytically active sites for the oxidation and reduction half reactions, and fast electron (hole) diffusion and charge separation. Nanowires present suitable architectures to meet these requirements. Axially segmented Ag|ZnO and radially segmented (coaxial) TiO₂-Ag nanowires with a diameter of 200 nm and a length of 6-20 µm were made by templated electrodeposition within the pores of polycarbonate track-etched (PCTE) or anodized aluminum oxide (AAO) membranes, respectively. In the photocatalytic experiments, the ZnO and TiO₂ phases acted as photoanodes, and Ag as cathode. No external circuit is needed to connect both electrodes, which is a key advantage over conventional photo-electrochemical cells. For making segmented Ag|ZnO nanowires, the Ag salt electrolyte was replaced after formation of the Ag segment to form a ZnO segment attached to the Ag segment. For making coaxial TiO₂-Ag nanowires, a TiO₂ gel was first formed by the electrochemically induced sol-gel method. Drying and thermal annealing of the as-formed TiO₂ gel resulted in the formation of crystalline TiO₂ nanotubes. A subsequent Ag electrodeposition step inside the TiO₂ nanotubes resulted in formation of coaxial TiO₂-Ag nanowires. Due to the combination of an n-type semiconductor (ZnO or TiO₂) and a metal (Ag) within the same nanowire, a Schottky barrier was created at the interface between the phases. To demonstrate the photocatalytic activity of these nanowires, the Ag|ZnO nanowires were used in a photocatalytic experiment in which H₂ gas was detected upon UV illumination of the nanowires dispersed in a methanol/water mixture. After 17 min of illumination, approximately 0.2 vol% H₂ gas was detected from a suspension of ~0.1 g of Ag|ZnO nanowires in a 50 ml 80 vol% aqueous methanol solution.     

Antimicrobial activity of metal based nanoparticles against microbes associated with diseases in aquaculture

The emergence of diseases and mortalities in aquaculture and development of antibiotics resistance in aquatic microbes, has renewed a great interest towards alternative methods of prevention and control of diseases. Nanoparticles have enormous potential in controlling human and animal pathogens and have scope of application in aquaculture. The present investigation was carried out to find out suitable nanoparticles having antimicrobial effect against aquatic microbes. Different commercial as well as laboratory synthesized metal and metal oxide nanoparticles were screened for their antimicrobial activities against a wide range of bacterial and fungal agents including certain freshwater cyanobacteria. Among different nanoparticles, synthesized copper oxide (CuO), zinc oxide (ZnO), silver (Ag) and silver doped titanium dioxide (Ag–TiO₂) showed broad spectrum antibacterial activity. On the contrary, nanoparticles like Zn and ZnO showed antifungal activity against fungi like Penicillium and Mucor species. Since CuO, ZnO and Ag nanoparticles showed higher antimicrobial activity, they may be explored for aquaculture use.     

Visible-Light-Induced Bactericidal Activity of a Nitrogen-Doped Titanium Photocatalyst against Human Pathogens

The antibacterial activity of photocatalytic titanium dioxide (TiO₂) substrates is induced primarily by UV light irradiation. Recently, nitrogen- and carbon-doped TiO₂ substrates were shown to exhibit photocatalytic activities under visible-light illumination. Their antibacterial activity, however, remains to be quantified. In this study, we demonstrated that nitrogen-doped TiO₂ substrates have superior visible-light-induced bactericidal activity against Escherichia coli compared to pure TiO₂ and carbon-doped TiO₂ substrates. We also found that protein- and light-absorbing contaminants partially reduce the bactericidal activity of nitrogen-doped TiO₂ substrates due to their light-shielding effects. In the pathogen-killing experiment, a significantly higher proportion of all tested pathogens, including Shigella flexneri, Listeria monocytogenes, Vibrio parahaemolyticus, Staphylococcus aureus, Streptococcus pyogenes, and Acinetobacter baumannii, were killed by visible-light-illuminated nitrogen-doped TiO₂ substrates than by pure TiO₂ substrates. These findings suggest that nitrogen-doped TiO₂ has potential application in the development of alternative disinfectants for environmental and medical usages.     

In Vitro Influences of TiO2 Nanoparticles on Barley (Hordeum vulgare L.) Tissue Culture

In the last decades, extensive research on the effects of nano-TiO₂ on plant systems and different microorganisms has confirmed its photocatalytic and antimicrobial activity. However, there is no report on its application in plant cell and tissue culture as well as its role in eliminating contaminating microorganisms in tissue culture. In this work, barley mature embryos were cultured in Murashige and Skoog medium with four concentrations (0, 10, 30, 60???g/ml) of TiO₂ suspension in four repetitions. Quantitative and qualitative characteristics of calli were analyzed after each subculture. Data analysis for calli number in the first culture and callus size in all three cultures showed that the effect of treatment was significant at p?>?0.95. As a result, quantitative features such as callus color, shape, embryogenesis, etc. were completely similar in both control and TiO₂ nanoparticle treatments; there is no doubt that TiO₂ nanoparticles could dramatically increase callugenesis and the size of calli. As well, TiO₂ nanoparticles are effective bactericides with an aseptic effect, causing no negative change in the quality of the callus. It is necessary to do more complementary works to identify mechanisms involved for the increased calli size and embryogenesis of explants in darkness.     

Effect of ZnO and TiO2 nanoparticles preilluminated with UVA and UVB light on Escherichia coli and Bacillus subtilis

We evaluated the effects of zinc oxide (ZnO) and titanium dioxide (TiO₂) nanoparticles (NPs) preilluminated with ultraviolet light on Escherichia coli and Bacillus subtilis. The experiments were conducted using three different types of light: visible, Ultraviolet A (UVA, 315–400 nm), and Ultraviolet B (UVB, 280–315 nm). The bacteria were exposed to NPs, either as liquid suspensions for growth inhibition assays or on agar plates for colony forming unit (CFU) assays. We found that the ZnO NPs were more toxic when preilluminated with UVA or UVB light than with visible light in both growth inhibition and CFU assays. TiO₂ NPs were not toxic to the bacteria under UVA or UVB preillumination conditions. The photo-dissolution of ZnO NPs increased with UV preillumination, which could explain the observed toxicity of ZnO NPs. We detected oxidative stress elicited by photoactive nanoparticles by measuring superoxide dismutase activity. The results of this study show that the toxicity of photoactive nanoparticles can be increased by UV preillumination by dissolution of toxic ions, which suggests the potential for preillumination-dependent toxicity of nanoparticles on soil environments in low light or darkness.     

Antibacterial performance of nanoscaled visible-light responsive platinum-containing titania photocatalyst in vitro and in vivo

Background

Traditional antibacterial photocatalysts are primarily induced by ultraviolet light to elicit antibacterial reactive oxygen species. New generation visible-light responsive photocatalysts were discovered, offering greater opportunity to use photocatalysts as disinfectants in our living environment. Recently, we found that visible-light responsive platinum-containing titania (TiO₂–Pt) exerted high performance antibacterial property against soil-borne pathogens even in soil highly contaminated water. However, its physical and photocatalytic properties, and the application in vivo have not been well-characterized.

Methods

Transmission electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, ultraviolet–visible absorption spectrum and the removal rate of nitrogen oxides were therefore analyzed. The antibacterial performance under in vitro and in vivo conditions was evaluated.

Results

The apparent quantum efficiency for visible light illuminated TiO₂–Pt is relatively higher than several other titania photocatalysts. The killing effect achieved approximately 2 log reductions of pathogenic bacteria in vitro. Illumination of injected TiO₂–Pt successfully ameliorated the subcutaneous infection in mice.

Conclusions

This is the first demonstration of in vivo antibacterial use of TiO₂–Pt nanoparticles. When compared to nanoparticles of some other visible-light responsive photocatalysts, TiO₂–Pt nanoparticles induced less adverse effects such as exacerbated platelet clearance and hepatic cytotoxicity in vivo.

General significance

These findings suggest that the TiO₂–Pt may have potential application on the development of an antibacterial material in both in vitro and in vivo settings.     

Low-Temperature Synthesis of Anatase TiO2 Nanoparticles with Tunable Surface Charges for Enhancing Photocatalytic Activity

In this work, the positively or negatively charged anatase TiO₂ nanoparticles were synthesized via a low temperature precipitation-peptization process (LTPPP) in the presence of poly(ethyleneimine) (PEI) and poly(sodium4- styrenesulfonate) (PSS). X-ray diffraction (XRD) pattern and high-resolution transmission electron microscope (HRTEM) confirmed the anatase crystalline phase. The charges of the prepared TiO₂, PEI-TiO₂ and PSS-TiO₂ nanoparticles were investigated by zeta potentials. The results showed that the zeta potentials of PEI-TiO₂ nanoparticles can be tuned from +39.47 mV to +95.46 mV, and that of PSS-TiO₂ nanoparticles can be adjusted from −56.63 mV to −119.32 mV. In comparison with TiO₂, PSS-TiO₂ exhibited dramatic adsorption and degradation of dye molecules, while the PEI modified TiO₂ nanoparticles showed lower photocatalytic activity. The photocatalytic performances of these charged nanoparticles were elucidated by the results of UV-vis diffuse reflectance spectra (DRS) and the photoluminescence (PL) spectra, which indicated that the PSS-TiO₂ nanoparticles showed a lower recombination rate of electron-hole pairs than TiO₂ and PEI-TiO₂.     

A review of cardiovascular toxicity of TiO<Subscript>2</Subscript>, ZnO and Ag nanoparticles (NPs)

To ensure the safe use of nanoparticles (NPs) in modern society, it is necessary and urgent to assess the potential toxicity of NPs. Cardiovascular system is required for the systemic distribution of NPs entering circulation. Therefore, the adverse cardiovascular effects of NPs have gained extensive research interests. Metal based NPs, such as TiO₂, ZnO and Ag NPs, are among the most popular NPs found in commercially available products. They may also have potential applications in biomedicine, which could increase their contact with cardiovascular systems. This review aimed at providing an overview about the adverse cardiovascular effects of TiO₂, ZnO and Ag NPs. We discussed about the bio-distribution of NPs following different exposure routes. We also discussed about the cardiovascular toxicity of TiO₂, ZnO and Ag NPs as assessed by in vivo and in vitro models. The possible mechanisms and contribution of physicochemical properties of metal based NPs were also discussed.     

TiO2 Photocatalysis Damages Lipids and Proteins in Escherichia coli

This study investigates the mechanisms of UV-A (315 to 400 nm) photocatalysis with titanium dioxide (TiO₂) applied to the degradation of Escherichia coli and their effects on two key cellular components: lipids and proteins. The impact of TiO₂ photocatalysis on E. coli survival was monitored by counting on agar plate and by assessing lipid peroxidation and performing proteomic analysis. We observed through malondialdehyde quantification that lipid peroxidation occurred during the photocatalytic process, and the addition of superoxide dismutase, which acts as a scavenger of the superoxide anion radical (O₂·⁻), inhibited this effect by half, showing us that O₂·⁻ radicals participate in the photocatalytic antimicrobial effect. Qualitative analysis using two-dimensional electrophoresis allowed selection of proteins for which spot modifications were observed during the applied treatments. Two-dimensional electrophoresis highlighted that among the selected protein spots, 7 and 19 spots had already disappeared in the dark in the presence of 0.1 g/liter and 0.4 g/liter TiO₂, respectively, which is accounted for by the cytotoxic effect of TiO₂. Exposure to 30 min of UV-A radiation in the presence of 0.1 g/liter and 0.4 g/liter TiO₂ increased the numbers of missing spots to 14 and 22, respectively. The proteins affected by photocatalytic oxidation were strongly heterogeneous in terms of location and functional category. We identified several porins, proteins implicated in stress response, in transport, and in bacterial metabolism. This study reveals the simultaneous effects of O₂·⁻ on lipid peroxidation and on the proteome during photocatalytic treatment and therefore contributes to a better understanding of molecular mechanisms in antibacterial photocatalytic treatment.     

Mechanisms of the enhanced antibacterial effect of Ag-TiO2 coatings

It has been demonstrated that Ag-TiO₂ nanocomposite coatings with excellent antimicrobial activity and biocompatibility have the potential to reduce infection problems. However, the mechanism of the synergistic effect of Ag-TiO₂ coatings on antibacterial efficiency is still not well understood. In this study, five types of Ag-TiO₂ nanocomposited coatings with different TiO₂ contents were prepared on a titanium substratum. Leaching tests indicated that the incorporation of TiO₂ nanoparticles into an Ag matrix significantly promoted Ag ion release. Surface energy measurements showed that the addition of TiO₂ nanoparticles also significantly increased the electron donor surface energy of the coatings. Bacterial adhesion assays with Escherichia coli and Staphylococcus aureus demonstrated that the number of adhered bacteria decreased with increasing electron donor surface energy. The increased Ag ion release rate and the increased electron donor surface energy contributed to an enhanced antibacterial efficiency of the coatings.     

The effect of thermal treatment on antibacterial properties of nanostructured TiO<Subscript>2</Subscript>(N) films illuminated with visible light

This work focuses on the photocatalytic performances and antibacterial activity of nitrogen doped TiO₂ nanosystems with three and five layers obtained by a sol-gel route, followed by thermal treatment in oxygen or ammonia atmosphere at temperatures between 400 and 1000°C. Subsequently, the antibacterial activity of the obtained nanosystems on the Escherichia coli cells are determined and discussed. The obtained results show a significant dependence of the functional performances on the system’s composition. In particular, the antimicrobial activity of nitrogen-doped TiO₂ films is correlated with the temperature of thermal treatment and illumination time with visible artificial light.     

Microplate-based assays for the evaluation of antibacterial effects of photocatalytic coatings

Three microplate-based viability assays for assessing the antibacterial effects of photocatalytic coatings were compared to the conventional colony count method. In the experimental design, cultured Escherichia coli were exposed to photocatalysis on various TiO₂ films in the presence of either UVA or visible light. The photocatalytic effects on the bacterial physiology were determined by real-time measurements of metabolic activity (XTT assay), biomass formation in the liquid medium (growth assay), and by assessing membrane integrity (with propidium iodide and SYTO 9 fluorescent nucleic acid binding dyes—BacLight assay). All three methods proved to be more sensitive and reproducible than colony count for the evaluation of the bactericidal effect of photocatalysis, XTT, and growth assay succeeded in detecting differences in both UVA and visible light-activated photocatalytic coatings. BacLight could efficiently detect the visible light-dependent photocatalytic effect on bacteria and identify membrane damage, but resulted inadequate for evaluating the UVA-dependent antibacterial effects. The described microplate-based evaluation methods proved being more effective and rapid than the colony count assay for assessing the antibacterial effect of various photocatalytic coatings.     

Toxicity of TiO2 Nanoparticles to Escherichia coli: Effects of Particle Size,Crystal Phase and Water Chemistry

Controversial and inconsistent results on the eco-toxicity of TiO₂ nanoparticles (NPs) are commonly found in recorded studies and more experimental works are therefore warranted to elucidate the nanotoxicity and its underlying precise mechanisms. Toxicities of five types of TiO₂ NPs with different particle sizes (10∼50 nm) and crystal phases were investigated using Escherichia coli as a test organism. The effect of water chemistry on the nanotoxicity was also examined. The antibacterial effects of TiO₂ NPs as revealed by dose-effect experiments decreased with increasing particle size and rutile content of the TiO₂ NPs. More bacteria could survive at higher solution pH (5.0–10.0) and ionic strength (50–200 mg L⁻¹ NaCl) as affected by the anatase TiO₂ NPs. The TiO₂ NPs with anatase crystal structure and smaller particle size produced higher content of intracellular reactive oxygen species and malondialdehyde, in line with their greater antibacterial effect. Transmission electron microscopic observations showed the concentration buildup of the anatase TiO₂ NPs especially those with smaller particle sizes on the cell surfaces, leading to membrane damage and internalization. These research results will shed new light on the understanding of ecological effects of TiO₂ NPs.     

Exposure to titanium dioxide and other metallic oxide nanoparticles induces cytotoxicity on human neural cells and fibroblasts

The use of titanium dioxide (TiO₂) in various industrial applications (eg, production of paper, plastics, cosmetics, and paints) has been expanding thereby increasing the occupational and other environmental exposure of these nanoparticles to humans and other species. However, the health effects of exposure to TiO₂ nanoparticles have not been systematically assessed even though recent studies suggest that such exposure induces inflammatory responses in lung tissue and cells. Because the effects of such nanoparticles on human neural cells are unknown, we have determined the putative cytotoxic effects of these nanoparticles on human astrocytes-like astrocytoma U87 cells and compared their effects on normal human fibroblasts. We found that TiO₂ micro- and nanoparticles induced cell death on both human cell types in a concentration-related manner. We further noted that zinc oxide (ZnO) nanoparticles were the most effective, TiO₂ nanoparticles the second most effective, and magnesium oxide (MgO) nanoparticles the least effective in inducing cell death in U87 cells. The cell death mechanisms underlying the effects of TiO₂ micro- and nanoparticles on U87 cells include apoptosis, necrosis, and possibly apoptosis-like and necrosis-like cell death types. Thus, our findings may have toxicological and other pathophysiological implications on exposure of humans and other mammalian species to metallic oxide nanoparticles.     

Photocatalytic Reduction of CO2 into Methanol over Ag/TiO2 Nanocomposites Enhanced by Surface Plasmon Resonance

Ag-loaded TiO₂ (Ag/TiO₂) nanocomposites were prepared by microwave-assisted chemical reduction method using tetrabutyl titanate as the Ti source. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption isotherms, UV–vis absorption spectrum, X-ray photoelectron spectrum, photoluminescence spectrum, and Raman scattering spectrum, respectively. Results revealed that Ag nanoparticles (NPs) were successfully deposited on TiO₂ by reduction of Ag⁺, and the visible light absorption and Raman scattering of TiO₂ were enhanced by Ag NPs based on its surface plasmon resonance effect. Besides, Ag NPs could also effectively restrain the recombination of photogenerated electrons and holes with a longer luminescence life time. In addition, photocatalytic reduction of CO₂ with H₂O on the composites was conducted to obtain methanol. Experimental results indicated that Ag-loaded TiO₂ had better photocatalytic activity than pure TiO₂ due to the synergistic effect between UV light excitation and surface plasmon resonance enhancement, and 2.5 % Ag/TiO₂ exhibited the best activity; the corresponding energy efficiency was about 0.5 % and methanol yield was 405.2 μmol/g-cat, which was 9.4 times higher than that of pure TiO₂. Additionally, an excitation enhancement synergistic mechanism was proposed to explain the experimental results of photocatalytic reduction of CO₂ under different reaction conditions.     

Green synthesis and structural classification of Acacia nilotica mediated-silver doped titanium oxide (Ag/TiO2) spherical nanoparticles: Assessment of its antimicrobial and anticancer activity

Current exanimation reports, green fabrication of silver doped TiO₂ nanoparticles (Ag/TiO₂) using aqueous extract of Acacia nilotica as bio-reductant and assess its potential as antimicrobial and anticancer agent. The obtained spherical Ag/TiO₂ were characterized by various analytical techniques including FTIR, (XRD), (FE-SEM EDS), and (TEM). Synthesized Ag/TiO₂ demonstrated broad spectrum antibacterial and anticandidal activity. The order of antimicrobial activity was found to be E. coli > C. albicans > MRSA > P. aeruginosa. In addition, cytotoxicity and oxidative stress of Ag/TiO₂ nanoparticles in (MCF-7) cells was also investigated. Outcomes of MTT assay showed concentration dependent reduction in cell viability. Further, synthesized NPs reduced the level of glutathione, induced ROS generation and lipid peroxidation in the treated cells. Therefore, it is envisaged that these spherical nanoparticles may be exploited in drug delivery, pharmaceutical, and food industry.     

Both Enhanced Biocompatibility and Antibacterial Activity in Ag-Decorated TiO2 Nanotubes

In this study, Ag is electron-beam evaporated to modify the topography of anodic TiO₂ nanotubes of different diameters to obtain an implant with enhanced antibacterial activity and biocompatibility. We found that highly hydrophilic as-grown TiO₂ nanotubes became poorly hydrophilic with Ag incorporation; however they could effectively recover their wettability to some extent under ultraviolet light irradiation. The results obtained from antibacterial tests suggested that the Ag-decorated TiO₂ nanotubes could greatly inhibit the growth of Staphylococcus aureus. In vitro biocompatibility evaluation indicated that fibroblast cells exhibited an obvious diameter-dependent behavior on both as-grown and Ag-decorated TiO₂ nanotubes. Most importantly, of all samples, the smallest diameter (25-nm-diameter) Ag-decorated nanotubes exhibited the most obvious biological activity in promoting adhesion and proliferation of human fibroblasts, and this activity could be attributed to the highly irregular topography on a nanometric scale of the Ag-decorated nanotube surface. These experimental results demonstrate that by properly controlling the structural parameters of Ag-decorated TiO₂ nanotubes, an implant surface can be produced that enhances biocompatibility and simultaneously boosts antibacterial activity.     

3D‐Branched ZnO/CdS Nanowire Arrays for Solar Water Splitting and the Service Safety Research

Modulation of broadband light trapping through assembly of 3D structures and modification with narrow band‐gap semiconductors provide an effective way to improve the photoelectrochemical (PEC) performance. Here, 3D‐branched ZnO nanowire arrays (NWAs) modified with cadmium sulfide (CdS) nanoparticles are designed and synthesized via solution chemical routes. The 3D‐branched ZnO NWA–CdS nanoparticle photoanodes show an excellent PEC performance in UV and visible region and the maximum photo‐to‐hydrogen conversion efficiency reaches to 3.1%. The high performance of 3D‐branched ZnO NWA–CdS composites is mainly attributed to the excellent carrier collection capability and high light‐trapping ability of 3D‐branched ZnO NWAs as well as the excellent photocatalytic activity of CdS nanoparticles in the visible region. In addition, the photocorrosion mechanism of 3D‐branched ZnO NWA–CdS photoanodes is systematically investigated, and a protective TiO₂ layer is deposited onto the photoanodes to elevate the PEC stability. The results benefit a deeper understanding of the role of 3D‐branched structures decorated with narrow band‐gap semiconductors in solar water splitting.     

Enhanced photocatalytic activity of ceria-doped zinc oxide under UV illumination prepared via chemical precipitation

Transition metal oxide has emerged as one of the most potential candidates for environment remediation by utilizing solar energy through photocatalysis. This study compares the optical characteristics of zinc oxide (ZnO) and ceria-doped zinc oxide (CeZnO) nanoparticles synthesized through a facile chemical precipitation method without using any assistant catalyst. The present work investigates the consequences of ceria (cerium dioxide, CeO₂) intrusion on the photocatalytic activity of ZnO nanoparticles using methylene blue (MB) as a probe pollutant. The CeZnO showed an increase in photoactivity when compared to ZnO nanoparticles for degradation of MB in an aqueous solution under ultraviolet (UV) irradiance. The resulting heterojunction between ZnO and that of ceria enhances the charge separation efficiency showing a strong correlation between ZnO and CeO₂ heterojunction on the charge transfer mechanism across the interface.