An analysis of the seasonal variation in the dry seed yields of eleven cultivars of Phaseolus vulgaris

Nine determinate and two indeterminate-bush dry seed cultivars of P. vulgaris were grown in trials for four successive years. Mean annual yield of air dry seed (15% moisture content) varied between 222 and 398 g/m². Most of the annual variation in yield was accounted for by differences in the quantity of nitrogen fertiliser applied and in the duration of bright sunshine during August. The annual mean harvest date varied between 20 September and 9 October. There was a significant negative correlation between the mean harvest date and the number of Ontario heat units accumulated between 20 May and 20 July. There were significant interactions between genotype and environment for both yield and harvest date; joint regression analysis of the interactions showed that five of the cultivars, which had previously been identified as cold tolerant in laboratory tests, all showed greater stability of yield and of maturity date than standard navy bean types. Environmental variation in the yield components of the cold tolerant selections tended to be compensatory, while that of the standard navy beans was additive in its effects on yield.     

Growing vetches (Vicia villosa Roth) in irrigated cotton systems: inputs of fixed N, N fertiliser savings and cotton productivity

We compared symbiotic N₂ fixation by winter forage legumes (clovers, medics and vetches) using the ¹⁵N natural abundance technique in three experiments. Vetches (Vicia spp.) were the most productive legumes, and woollypod vetch fixed (shoot+root) up to 265 kg N ha^–1 (mean 227 kg N ha^–1) during a 4–5 months period over winter and early spring. Balansa and Berseem clovers, and Gama medic were highly productive in the first experiment, but fixed significantly less N than woollypod vetch in the second experiment. A 6-year study (1997–2003) compared cotton (Gossypium hirsutum L.) systems with and without vetch, or with faba beans (Vicia faba L.) to assess the effects of these crops on cotton production. Woollypod vetch was grown either between annual cotton crops, or between wheat (Triticum aestivumL.) and cotton crops. Vetch added 230 kg N ha^–1 (174 kg fixed N ha^–1) to the soil when incorporated as a green manure. Faba bean shoot residues and nodulated roots contributed 108 kg fixed N ha^–1 to the soil, following the removal of 80 kg N ha^–1 in the harvested seed (meaned over three crops). Lablab (Lablab purpureus L. – summer-growing and irrigated) added 277 kg N ha^–1 (244 kg fixed N ha^–1) before incorporation as a green manure in the first year of the experiment. The economic optimum N fertiliser rate for each cropping system was determined every second year when all systems were sown to cotton. Cotton following cotton required 105 kg fertiliser N ha^–1, but only 40 kg N ha^–1 when vetch was grown between each cotton crop. Cotton following wheat required 83 kg fertiliser N ha^–1 but no N fertiliser was needed when vetch was grown after wheat (the highest yielding system). Cotton following faba beans also required no N fertiliser. The vetch-based systems became more N fertile over the course of the experiment and produced greater lint yields than the comparative non-legume systems, and required less N fertiliser. While no cash flow was derived from growing vetch, economic benefits accrued from enhanced cotton yields, reduced N fertiliser requirements and improved soil fertility. These findings help explain the rotational benefits of vetches observed in other regions of the world.     

Yield components and cultivar, sowing date and density in field beans (Viciafaba)

Delay in sowing the cultivars Ostlers (Viciafaba var. equina) and Herz Freya (V.faba var. minor) beyond late February depressed yield. Densities of at least sixty plants per m² were required to ensure that yield was not limited by sowing rate. Differences in yield in response to changes in density were reflected particularly in changes in numbers of pod-bearing nodes per plant, but also to a lesser extent in numbers of pods per pod-bearing node. The inherently larger seed weight of cv. Ostlers compared with cv. Herz Freya did not confer any yield advantage, differences in number of beans per pod and number of pods per pod-bearing node tending to equalize the yield of the two cultivars. The most stable component of yield throughout was number of beans per pod, and the least stable was number of pod-bearing nodes per plant.     

The effect of Rhizobium inoculation and nitrogen fertiliser on nitrogen fixation and seed yield of dry beans (Phaseolus vulgaris)

The potential benefit to be derived from seed inoculation of Phaseolus vulgaris beans with effective strains of Rhizobium phaseoli, was investigated in field experiments over three years on a site low in soil nitrogen and lacking indigenous effective strains of R. phaseoli. Inoculation with R. phaseoli (strain RCR 3644) produced significant increases in nodulation, nitrogenase activity and plant growth in all experiments. In trials in 1978 and 1979, with cv. Seafarer, inoculation, in the absence of nitrogen fertiliser doubled seed yields. In 1978, the seed yields from inoculated beans without nitrogen fertiliser (1–6 t/ha) were not significantly different from those obtained with uninoculated beans receiving the optimum nitrogen fertiliser treatment of 120 kg N/ha (1–75 t/ha). In 1979, with lower rainfall favouring more efficient utilisation of nitrogen fertiliser, inoculation gave seed yields (1–88 t/ha) equivalent to those obtained with 60 kg N/ha (1–70 t/ha) but significantly less than with 120 kg N/ha (2–88 t/ha). More precise estimates from nitrogen response curves showed that inoculation supplied the fertiliser equivalent of 105 and 70 kg N/ha in 1978 and 1979 respectively. In both years, significant benefits were also obtained by the combination of inoculation and nitrogen fertiliser. In a separate experiment in 1979, with four R. phaseoli strains inoculated onto eight bean cultivars, three were highly effective nitrogen fixers on all cultivars. Two strains (RCR 3644 and NVRS 963A) each increased mean yields, in the absence of nitrogen fertiliser, from 1–39 t/ha uninoculated to c. 2–5 t/ha inoculated whilst strain RCR 3622 was outstanding with a mean yield of 3-0 t/ha. An analysis of the nitrogen content of seed showed that gains from nitrogen fixation were 37–57 kg N/ha/growing cycle for the combination RCR 3644 with cv. Seafarer. However, 106 kg N/ha/growing cycle was recorded for the combination RCR 3622 and cv. Aurora.     

Effect of different manuring and defoliation patterns on broad-leaved dock (Rumex obtusifolius) in grassland

The effects of cutting frequency and cutting height on broad‐leaved dock (Rumex obtusifolius) in Lolium perenne‐based agricultural grassland at two levels of fertiliser input were investigated at North Wyke, Devon, UK. Two micro‐plot field experiments, containing immature dock plants at uniform densities, with a factorial design, were used to compare: (a) ‘organic’ and ‘low‐input’ fertilisation, i.e. cattle slurry only vs slurry plus mineral fertiliser (NPK at 100‐0‐64 kg ha^?1 yr^?1), (b) cutting heights of 5–6 cm vs 10–12 cm, and (c) four harvesting frequencies representative of different grassland management practices (regular 4‐weekly cutting, a ‘hay‐stage’ cutting, and two treatments with ‘silage‐stage’ cutting). Expt 1 was established in 1995 with 13 dock plants m^?2 (from excised dock‐root sections) and Expt 2 established in 1996 with 25 plants m^?2 (as seed‐grown plug plants). Treatments were assessed over the 2 subsequent years to determine treatment effects on total herbage dry matter (DM) yield and dock DM yield, and on in‐situ measures of dock ramets. In both experiments, total DM yield was increased by 1.0–2.01 ha^?1 yr^?1 for treatments receiving NK fertiliser; the proportion of dock was also higher than from slurry‐only treatments. In Expt 1, the dock ramet density, mean dock ramet height, mean leaf length and numbers of dock leaves per m² were also greater on NK fertilised treatments in autumn of yr 1. Height of cut had no consistent effect on dock yield, but dock ramet density and leaf density in autumn were greater on the 5–6 cm than the 10–12 cm cutting treatment, Expt 2 only. In yr 2 of both experiments cutting at 4‐weekly intervals resulted in less dock in the herbage than hay‐stage cutting and, particularly in Expt 1, there were associated differences in leaf density and ramet height in autumn; silage‐stage treatments were intermediate. Results are discussed in relation to requirements for management options where there is a need to avoid or reduce herbicides.     

Effect of specific leaf nitrogen content on photosynthesis of sugarcane

In the laboratory, rate of photosynthesis (P) of the youngest fully emerged leaf lamina on a shoot, whether taken from a 4 or 8 month old sugarcane plant, increased approximately linearly with specific leaf nitrogen content (SLN) from < 1.0 to c. 1.7 g m^-2; the rate of increase was greater the higher the incident photosynthetically active radiation (PAR) flux density, over the range 80 to 1600 μmol m^-2s^-1. In a field crop receiving standard fertiliser, including 150 kg N ha^-1, SLN of the green leaf canopy decreased more or less linearly with depth, from > 1.7 g m^-2at the top to c. 1.0 g m^-2at the bottom at 15 wk of age, and progressively with time to 1.2 to 0.85 g m^-2from top to bottom of the canopy by week 45. Where an extra 300 N ha^-1were applied in top-dressings, the decrease in SLN with time was somewhat smaller, to 1.3 to 0.9 g m^-2from top to bottom of the canopy by week 45. Calculations with a model, using the data from laboratory and field, suggest a decrease of about 25% in canopy gross P and about 30% in canopy net P from wk 15 to wk 45 in the crop receiving standard fertiliser only; the calculated decreases where the crop received additional nitrogen were about 17% and 20% respectively. There would seem to be a need for a change in type of cultivar to make profitable use of augmented nitrogen fertiliser.     

Optimum plant densities for three semi-leafless combining pea (Pisum sativum) cultivars under contrasting field conditions

Yield and yield components of three semi-leafless pea (Pisum sativum) cultivars, of contrasting seed type/growth habit, were assessed at target planting densities of 40–140 plants/m² on nine sites over three years. Flat-topped parabolic/asymptotic yield/density relationships were obtained. The plant density required to maximise (p max) and optimise (p opt) yield differed between cultivars: Helka, small blue, p max 126 plants/m², p opt 101 plants/m²; Solara, large blue, p max 124 plants/m², p opt 94 plants/m²; and Countess, white-seeded, p max 104 plants/m², p opt 71 plants/m². Near-maximum yields were maintained between 70 and 140 plants/m² due to the ability of the pea crop to make compensatory increases in the number of pods per plant as density declined. Yield/density responses were influenced by site (e.g. soil type) more than by seasonal factors. The risk of yield reductions occurring at densities below 70 plants/m² was greater on a mineral soil than on a fertile organic soil. On the basis of agronomic and economic considerations, there was no evidence that target plant densities required to optimise yield should necessarily be higher for semi-leafless cultivars studied than for conventional leafed peas.     

Reintroduction of rare arable plants by seed transfer. What are the optimal sowing rates?

相似文献   

Photosynthetic characteristics and productivity of spring rape plants as related to crop density

Optimal density of spring rape (Brassica napus L.) crop stand was determined by plant photosynthetic characteristics at the beginning of flowering. As crop density increased from 100 to 350 plants/m², leaf surface index (LSI) of the crop was found to increase by 18.2–80.2%, and LSI decreased by 38.8–67.3% as compared with the sparsest crop (50–100 plants/m²). LSI depended on the rate of incident PAR reaching 0.5 and 0.25 heights of the crop stand and to the soil surface. When crop density increased from 100 to 350 plants/m², the photosynthetic potential (PP) of the crop increased 1.8 times as compared with the sparsest crop. PP of the densest rape crop stand was 3 times lower than in the sparsest crop. When the crop density increased from 100 to 250 plants/m², the daily increment in biomass calculated per leaf surface unit increased by 27.0% as compared with the sparsest crop and depended on LSI. When leaf area decreased, the daily increment in biomass calculated per leaf surface unit declined; in the densest stand, this characteristic was by 58.3% lower than in the sparsest crop. Rape productivity at the flowering stage depended on the crop density, LSI of plants, rate of PAR reaching 0.5 and 0.25 heights of the crop stand and to the soil surface, PP, and the daily increment in biomass calculated per leaf surface unit. Crop productivity at the flowering stage and the rape seed yield were associated by a significant parabolic relationship. When crop density increased from 100 to 350 plants/m², seed yield per plant considerably decreased (by 33.1–78.5%) as compared with the sparsest crop. The greatest influence on seed yield per plant was exerted by LSI and the daily increment in biomass calculated per leaf surface unit. When crop density increased to 250–300 plants/m², the seed yield considerably rose (by 28.6–58.8%) as compared with the sparsest crop; when this index reached 300–350 plants/m², the seed yield decreased because plant growth was suppressed, with the productivity reduced. The results thus obtained suggest that the photometric characteristics of spring rape were at optimum at crop density of 100–250 plants/m². The agroclimatic conditions of Lithuania ensure potential for rapid accumulation of total biomass and high seed yield.     

氮磷钾配比施肥对广金钱草产量及质量的影响

测定了不同氮磷钾配施条件下广金钱草的株高、地径、种子产量、药材干重及夏佛塔苷含量。结果表明:施肥组生长状况及产量与不施肥组具有极显著差异,其中单施钾肥30g·m-2的广金钱草株高及药材干重最高,分别为174.04cm、94.50g;单施氮肥40g·m-2地径最粗,达到16.79mm;施氮、磷肥各80g·m-2,钾肥30g·m-2种子产量最高,增产率达到179.30%;施氮肥40g·m-2,磷肥80g·m-2,钾肥80g·m-2夏佛塔苷含量最高,达到0.175%。由此可知氮磷钾的合理配施能够促进广金钱草的生长并提高产量,同时影响夏佛塔苷的积累。以株高、地径、种子产量、药材干重、夏佛塔苷含量为评价标准。根据氮磷钾肥料多元二次曲线回归方程数学模型计算结果,得出氮最佳施肥量:42.4～64.5g·m-2,磷:49.5～59.0g·m-2,钾:30.0～41.0g·m-2。氮磷钾最佳施肥组合为N∶P∶K=5.4∶5.5∶3.7。     

Development of a pest threshold decision support system for minimising damage to winter wheat from wheat bulb fly,Delia coarctata

Wheat bulb fly, Delia coarctata, is an important pest of winter wheat in the UK, causing significant damage of up to 4 t/ha. Accepted population thresholds for D. coarctata are 250 eggs/m² for crops sown up to the end of October and 100 eggs/m² for crops sown from November. Fields with populations of D. coarctata that exceed the thresholds are at higher risk of experiencing economically damaging infestations. In the UK, recent withdrawal of insecticides means that only a seed treatment (Signal 300 ES) is available for chemical control of D. coarctata; however, this is only effective for late-sown crops and accurate estimations of annual population levels are required to ensure a seed treatment is applied if needed. As a result of the lack of postdrilling control strategies, the management of D. coarctata is becoming reliant on nonchemical methods of control. Control strategies that are effective in managing similar stem-boring pests of wheat include sowing earlier and using higher seed rates to produce crops with greater pest tolerance. In this study, we develop two predictive models that can be used for integrated D. coarctata management. The first is an updated pest level prediction model that predicts D. coarctata populations from meteorological parameters with a predictive accuracy of 70%, a significant improvement on previous prediction models. Our second model predicts the maximum number of shoots for a winter wheat crop that would be expected at the terminal spikelet development stage. This shoot number model uses information about the thermal time from plant emergence to terminal spikelet, leaf phyllochron length, plant population and sowing date to predict the degree of tolerance a crop will have against D. coarctata. The shoot number model was calibrated against data collected from five field experiments and tested against data from four experiments. Model testing demonstrated that the shoot number model has a predictive accuracy of 65.7%. The foundation for a future decision support system using these models for the sustainable management of D. coarcata risk is described. It should be noted that these models represent a stepping-stone towards a decision support system and that further model validation over a wider geographic range is required.     

Influence of lodging and nitrogen rate on the yield and yield attributes of oilseed rape (Brassica napus L.)

The effects of lodging and nitrogen rate were studied in a field trial of oilseed rapeBrassica napus L. Lodging decreased seed yield (16%) compared with a frame-raised crop. Yield decreased because of a significant reduction in each of the yield components coupled with a reduced plant population caused by stem breakage at the ground level. Lodging also reduced the final crop dry weight and harvest index. Seed yield was also lower when 200 kg ha^–1 nitrogen was applied than with 400 kg ha^–1. A general decrease in pod number m^–2, seed nuber pod^–1 and seed weight caused the lower yields. The use of 400 kg ha^–1 of nitrogen changed the contribution of the terminal raceme and individual branches with respect to seed yield. Seed nitrogn content and nitrogen yield increased at the 400 kg ha^–1, lowering both seed oil content and oil yield.     

“Ecological Armageddon” – more evidence for the drastic decline in insect numbers

The efficient use of nitrogen by crops can minimise environmental risks and maximise returns to farmers. Under organic farming systems, this can be achieved by adjusting the fertilisation management and/or using genetic variability. Seven durum wheat (Triticum durum) cultivars and three emmer (Triticum dicoccum) cultivars were assessed under an organic farming system over a non‐consecutive 4‐year period (2005–11) in Foggia (southern Italy). The objectives were to investigate the agronomic and qualitative characteristics, and to evaluate the agronomic efficiency and adaptability according to three N fertilisation levels (0, 40, 80 kg N ha^?1). A split‐plot design was used, with three replications in each year. Nine traits were investigated: heading time, plant height, seed yield, number of spikes m^?2, harvest index, specific weight, 1000‐seed weight, and protein and gluten contents. Increasing N to 80 kg ha^?1 increased plant height (+7.3%), seed yield (+22.1%), spike density (+16.6%), and protein (+9.8%) and gluten (+2.1%) contents. The emmer genotypes and the oldest durum wheat ‘Cappelli’ showed the highest protein and gluten contents (mean, 13.9%, 11.2%, respectively). The maximum N agronomic efficiency [AE(N)] and N recovery efficiency [RE(N)] were seen for the modern durum wheat cultivars under 40 kg ha^?1 N treatment: ‘Duilio’, ‘Iride’ and ‘Varano’. The significant correlation between AE(N) and RE(N) and the year of release of the durum wheat cultivars (r = 0.53, P < 0.05, F = 4.7 for AE(N) and r = 0.57, P < 0.01, F = 5.7 for RE(N), respectively; n = 14) showed that the genetic breeding of this species for high grain yield is associated with an increase in the efficiency of N fertiliser use under organic farming. The highly significant effect for the Genotype × Environment interaction (F = 18.1, P < 0.001) of seed yield indicate the possibility to select for stable genotypes across environments. Based on the additive main effects and multiplicative interaction analysis, and the yield stability index, the varieties ‘Iride’ and ‘Varano’ show high‐stability responses and good seed yields under all N fertiliser treatments. Therefore, these varieties can be recommended for organic farming systems in Mediterranean areas.     

Increasing phosphorus supply in subsurface soil in northern Australia: Rationale for deep placement and the effects with various crops

Three field experiments involving wheat, lucerne or cotton were established at different sites in the semiarid cropping regions of northern Australia, to test whether the deep placement of P fertiliser improved P availability, compared to the conventional practice of placing the fertiliser beside or adjacent to the seed. At Mulga View, near St George in southern Queensland on a red Kandosol soil with a Colwell soil test value of 19 mg P kg soil⁻¹ in the top 10 cm, there was no response to 10 kg P ha⁻¹ applied in the 5–7 cm layer. However, increasing the depth of placement of 10 kg P ha⁻¹ from 5–7 to 10–15 cm resulted in increased shoot growth and grain yield of spring wheat (Triticum aestivum) by 43 and 30%, respectively. A further grain yield increase of 43% to 3.2 t ha⁻¹ resulted when the deep P rate was increased from 10 to 40 kg P ha⁻¹. At Roma, in southern Queensland, on a grey/brown Vertosol with a Colwell soil test value of 15 mg P kg soil⁻¹, there was no difference in the winter growth of lucerne (Medicago sativa) when P fertiliser had been applied at 5–7 cm depth at rates of 10 and 40 kg P ha⁻¹. Shoot dry matter yields were around 2 t ha⁻¹. However dry matter yields increased significantly to 2.6 and 3.7 t ha⁻¹ when 10 and 40 kg P ha⁻¹, respectively were applied at the 10–15 cm depth. The third experiment was carried out on a grey Vertosol at Kununurra in Western Australia. Significant increases in the yield of seed cotton (Gossypium hirsutum) occurred when 50 kg P ha⁻¹ was applied at depth (10–15 and 25–30 cm), compared with the conventional placement at 7–10 cm, with maximum yield response to deep placement occurring with DAP, and the minimal response with MAP. The cotton was grown on raised beds and the crop was irrigated according to district practice. The response to deep P at all sites was attributed to the rapid drying of the soil surface layers, reducing the availability of soil or fertiliser P in these layers. The deep fertiliser P remained available during the growing season and alleviated the P deficiency that appears to be a feature of these soils when the surface layers become dry.     

Down‐regulation of BnDA1, whose gene locus is associated with the seeds weight,improves the seeds weight and organ size in Brassica napus

Brassica napus L. is an important oil crop worldwide and is the main raw material for biofuel. Seed weight and seed size are the main contributors to seed yield. DA1 (DA means big in Chinese) is an ubiquitin receptor and negatively regulates seed size. Down‐regulation of AtDA1 in Arabidopsis leads to larger seeds and organs by increasing cell proliferation in integuments. In this study, BnDA1 was down‐regulated in B. napus by over expressed of AtDA1^R358K, which is a functional deficiency of DA1 with an arginine‐to‐lysine mutation at the 358th amino acid. The results showed that the biomass and size of the seeds, cotyledons, leaves, flowers and siliques of transgenic plants all increased significantly. In particular, the 1000 seed weight increased 21.23% and the seed yield per plant increased 13.22% in field condition. The transgenic plants had no negative traits related to yield. The candidate gene association analysis demonstrated that the BnDA1 locus was contributed to the seeds weight. Therefore, our study showed that regulation of DA1 in B. napus can increase the seed yield and biomass, and DA1 is a promising target for crop improvement.     

Comparison of growth and lipid content in three <Emphasis Type="Italic">Botryococcus braunii</Emphasis> strains

The growth and lipid content of three Botryococcus braunii strains from China (CHN), United Kingdom (UK) and Japan (JAP) were compared at three temperatures (20, 25 and 30 ^∘C), three irradiances (60, 100 and 300 W m⁻²) and four salinities (0, 0.15, 0.25, and 0.5 M NaCl) for 30 days, respectively. In the temperature trial, the UK strain and JAP strain grew faster at 25 ^∘C than at other temperatures, while the CHN strain performed equally well at 20 and 25 ^∘C. The JAP strain grew slowest among the three strains at all temperatures, whereas the growth rate of the CHN and UK strains was similar at all temperatures except at 20 ^∘C. The UK strain contained the highest lipid content, but the CHN strain had the lowest lipid content at most temperatures. In the light trial, the highest growth rate was found in the UK strain and the lowest growth rate was observed in the JAP strain at most irradiances. The UK and JAP strains contained more lipids than the CHN strain at 60 and 100 W m⁻², but the lipid content was not significantly different among the three strains at 300 W m⁻². In the salinity trial, both the CHN and UK strains grew faster than the JAP strain at all salinities, but the growth rate between the CHN and UK strains was not different. However, the CHN strain had the lowest lipid content whereas the UK strain produced the highest lipids at most salinities. Our results indicate that the CHN strain and the UK strain grow faster than the JAP strain, but the UK and JAP strains produce more lipids than the CHN strain. The UK strain should be considered as a potential B. braunii strain for the exploitation of renewable energy.     

The Average Body Surface Area of Adult Cancer Patients in the UK: A Multicentre Retrospective Study

The majority of chemotherapy drugs are dosed based on body surface area (BSA). No standard BSA values for patients being treated in the United Kingdom are available on which to base dose and cost calculations. We therefore retrospectively assessed the BSA of patients receiving chemotherapy treatment at three oncology centres in the UK between 1^st January 2005 and 31^st December 2005.A total of 3613 patients receiving chemotherapy for head and neck, ovarian, lung, upper GI/pancreas, breast or colorectal cancers were included. The overall mean BSA was 1.79 m² (95% CI 1.78–1.80) with a mean BSA for men of 1.91 m² (1.90–1.92) and 1.71 m² (1.70–1.72) for women. Results were consistent across the three centres. No significant differences were noted between treatment in the adjuvant or palliative setting in patients with breast or colorectal cancer. However, statistically significant, albeit small, differences were detected between some tumour groups.In view of the consistency of results between three geographically distinct UK cancer centres, we believe the results of this study may be generalised and used in future costings and budgeting for new chemotherapy agents in the UK.     

Physiological changes in soybean (Glycine max) Wuyin9 in response to N and P nutrition

Phosphorus deficiency is a very common problem in the acid soil of central China. Previous research has shown that starter N and N topdressing at the flowering stage (Rl) increased soybean (Glycine max) yield and N₂ fixation (Gan et al, 1997, 2000). However, there is little information available concerning soybean response to P‐fertiliser in soybean production in central China (Gan, 1999). A field experiment was conducted to investigate the response to P (0 kg P ha^?1, 22 kg P ha^?1, 44 kg P ha^?1 before sowing) and N fertiliser application (N1: 0 kg N ha^?1, N2: 25 kg N ha^?1 before sowing, N3: N2 + 50 kg N ha^?1 at the V2 stage and N4: N2 + 50 kg N ha^?1 at the R1 stage) on growth, yield and N₂ fixation of soybean. Both N and P fertiliser increased growth and seed yield of soybean (P < 0.01). Application of basal P fertiliser at 22 kg P ha^?1 or 44 kg P ha^?1 increased total N accumulation by 11% and 10% (P < 0.01) and seed yield by 12% and 13% (P < 0.01), respectively, compared to the zero P treatment. Although application of starter N at 25 kg N ha^?1 had no positive effect on seed yield at any P level (P > 0.05), an application of a topdressing of 50 kg N ha^?1 at the V2 or R1 stage increased total N accumulation by 11% and 14% (P < 0.01) and seed yield by 16% and 21% (P < 0.01), respectively, compared to the zero N treatment. Soybean plants were grown on sterilised Perlite in the greenhouse experiment to study the physiological response to different concentrations of phosphate (P1: 0 mM; P2: 0.05 mM; P3: 0.5 mM; P4:1.0 mN) and nitrate (N1: 0 mM with inoculation, N2: 20 mM with inoculation). The result confirmed that N and P nutrients both had positive effects on growth, nodulation and yield (P < 0.01). The relative importance of growth parameters that contributed to the larger biomass with N and P fertilisation was in decreasing order: (i) total leaf area, (ii) individual leaf area, (iii) shoot/root ratio, (iv) leaf area ratio and (v) specific leaf area. The yield increase at N and P supply was mainly associated with more seeds and a larger pod number per plant, which confirmed the result from the field experiment.     

Kodiak®—a successful biological-control product for suppression of soil-borne plant pathogens of cotton

Cotton (Gossypium spp) has been the first large-scale, agronomic crop in the United States treated with a biological-control agent (BCA) for suppression of seedling diseases and long-term chronic diseases of the rhizosphere. The vast majority of cotton seed planted in the United States is now treated with Bacillus subtilis strain GB03, registered as Kodiak^? (Gustafson, Inc, Plano, TX, USA). Responses are typically a mixture of growth promotion (increased root mass) and disease suppression (Rhizoctonia and Fusarium spp). Strain GB03 shows exceptional rhizosphere competence, colonizing the rhizosphere of monocots and dicots. Though the initial success of strain GB03 has been observed in the production of cotton, other crops have shown positive yield responses following bacterization. Since B. subtilis is a spore-forming organism, it is extremely tolerant of environmental stresses, including seed-treatment pesticides, soil and seed pH, cultivar effects, edaphic factors and long-term storage. More importantly, it is readily produced with current fermentation technology. Other BCAs, such as Pseudomonas spp, do not readily adapt to large-scale production methods, and stability is a limiting factor. In order to be successful, scale-up production must provide a product with efficacy equivalent to the laboratory model. A better understanding of how fermentation and other production processes affect the efficacy and rhizosphere competence of biocontrol organisms is now required by the industry. Processes have to be carefully optimized for both maximum production and maximum efficacy. A strong collaboration and understanding between the agricultural industry and industrial microbiologists are required to continue the advance of new biologicals such as Kodiak^?. Received 06 February 1997/ Accepted in revised form 16 April 1997     

Annual flower strips support pollinators and potentially enhance red clover seed yield

Ecological intensification provides opportunity to increase agricultural productivity while minimizing negative environmental impacts, by supporting ecosystem services such as crop pollination and biological pest control. For this we need to develop targeted management solutions that provide critical resources to service‐providing organisms at the right time and place. We tested whether annual strips of early flowering phacelia Phacelia tanacetifolia support pollinators and natural enemies of seed weevils Protapion spp., by attracting and offering nectar and pollen before the crop flowers. This was expected to increase yield of red clover Trifolium pratense seed. We monitored insect pollinators, pests, natural enemies and seed yields in a total of 50 clover fields along a landscape heterogeneity gradient, over 2 years and across two regions in southern Sweden. About half of the fields were sown with flower strips of 125–2,000 m². The clover fields were pollinated by 60% bumble bees Bombus spp. and 40% honey bees Apis mellifera. The clover seed yield was negatively associated with weevil density, but was unrelated to bee species richness and density. Flower strips enhanced bumble bees species richness in the clover fields, with the strongest influence in heterogeneous landscapes. There were few detectable differences between crop fields with and without flower strips. However, long‐tongued bumble bees were redistributed toward field interiors and during phacelia bloom honey bees toward field edges. Clover seed yield also increased with increasing size of the flower strip. We conclude that annual flower strips of early flower resources can support bumble bee species richness and, if sufficiently large, possibly also increase crop yields. However, clover seed yield was mainly limited by weevil infestation, which was not influenced by the annual flower strips. A future goal should be to design targeted measures for pest control.