Local dose enhancement of proton therapy by ceramic oxide nanoparticles investigated with Geant4 simulations

Nanoparticles (NPs) have been shown to enhance X-ray radiotherapy and proton therapy of cancer. The effectiveness of radiation damage is enhanced in the presence of high atomic number (high-Z) NPs due to increased production of low energy, higher linear energy transfer (LET) secondary electrons when NPs are selectively internalized by tumour cells. This work quantifies the local dose enhancement produced by the high-Z ceramic oxide NPs Ta₂O₅ and CeO₂, in the target tumour, for the first time in proton therapy, by means of Geant4 simulations. The dose enhancement produced by the ceramic oxides is compared against gold NPs. The energy deposition on a nanoscale around a single nanoparticle of 100 nm diameter is investigated using the Geant4-DNA extension to model particle interactions in the water medium. Enhancement of energy deposition in nano-sized shells of water, local to the NP boundary, ranging between 14% and 27% was observed for proton energies of 5 MeV and 50 MeV, depending on the NP material. Enhancement of electron production and energy deposition can be correlated to the direct DNA damage mechanism if the NP is in close proximity to the nucleus.     

Study of the effect of ceramic Ta2O5 nanoparticle distribution on cellular dose enhancement in a kilovoltage photon field

The application of nanoparticles (NPs) in radiotherapy is an increasingly attractive technique to improve clinical outcomes. The internalisation of NPs within the tumour cells enables an increased radiation dose to critical cellular structures. The purpose of this study is to investigate, by means of Geant4 simulations, the dose enhancement within a cell population irradiated with a 150 kVp photon field in the presence of a varying concentration of tantalum pentoxide (Ta₂O₅) NP aggregates, experimentally observed to form shells within tumour cells. This scenario is compared to the more traditionally simulated homogeneous solution of NP material in water with the same weight fraction of Ta₂O₅, as well as to a cell population without NPs present. The production of secondary electrons is enhanced by increased photoelectric effect interactions within the high-Z material and this is examined in terms of their kinetic energy spectra and linear energy transfer (LET) with various NP distributions compared to water. Our results indicate that the shell formation scenario limits the dose enhancement at 150 kVp. The underlying mechanism for this limit is discussed.     

Multi-strip silicon sensors for beam array monitoring in micro-beam radiation therapy

We present here the latest results from tests performed at the ESRF ID17 and ID21 beamlines for the characterization of novel beam monitors for Microbeam Radiation Therapy (MRT), which is currently being implemented at ID17. MRT aims at treating solid tumors by exploiting an array of evenly spaced microbeams, having an energy spectrum distributed between 27 and 600 keV and peaking at 100 keV. Given the high instantaneous dose delivered (up to 20 kGy/s), the position and the intensity of the microbeams has to be precisely and instantly monitored. For this purpose, we developed dedicated silicon microstrip beam monitors. We have successfully characterized them, both with a microbeam array at ID17, and a submicron scanning beam at ID21. We present here the latest results obtained in recent tests along with an outlook on future developments.     

Towards breast cancer rotational radiotherapy with synchrotron radiation

PurposeWe performed the first investigations, via measurements and Monte Carlo simulations on phantoms, of the feasibility of a new technique for synchrotron radiation rotational radiotherapy for breast cancer (SR³T).MethodsA Monte Carlo (MC) code based on Geant4 toolkit was developed in order to simulate the irradiation with the SR³T technique and to evaluate the skin sparing effect in terms of centre-to-periphery dose ratio at different energies in the range 60–175 keV. Preliminary measurements were performed at the Australian Synchrotron facility. Radial dose profiles in a 14-cm diameter polyethylene phantom were measured with a 100-mm pencil ionization chamber for different beam sizes and compared with the results of MC simulations. Finally, the dose painting feasibility was demonstrated with measurements with EBT3 radiochromic films in a phantom and collimating the SR beam at 1.5 cm in the horizontal direction.ResultsMC simulations showed that the SR³T technique assures a tumour-to-skin absorbed dose ratio from about 7:1 (at 60 keV photon energy) to about 10:1 (at 175 keV), sufficient for skin sparing during radiotherapy. The comparison between the results of MC simulations and measurements showed an agreement within 5%. Two off-centre foci were irradiated shifting the rotation centre in the horizontal direction.ConclusionsThe SR³T technique permits to obtain different dose distributions in the target with multiple rotations and can be guided via synchrotron radiation breast computed tomography imaging, in propagation based phase-contrast conditions. Use of contrast agents like iodinated solutions or gold nanoparticles for dose enhancement (DE-SR³T) is foreseen and will be investigated in future work.     

Single-electron photoreduction of the PM intermediate of cytochrome c oxidase

The P_M → F transition of the catalytic cycle of cytochrome c oxidase from bovine heart was investigated using single-electron photoreduction and monitoring the subsequent events using spectroscopic and electometric techniques. The P_M state of the oxidase was generated by exposing the oxidized enzyme to CO plus O₂. Photoreduction results in rapid electron transfer from heme a to oxoferryl heme a₃ with a time constant of about 0.3 ms, as indicated by transients at 605 nm and 580 nm. This rate is ∼ 5-fold more rapid than the rate of electron transfer from heme a to heme a₃ in the F → O transition, but is significantly slower than formation of the F state from the P_R intermediate in the reaction of the fully reduced enzyme with O₂ to form state F (70–90 μs). The ∼ 0.3 ms P_M → F transition is coincident with a rapid photonic phase of transmembrane voltage generation, but a significant part of the voltage associated with the P_M → F transition is generated much later, with a time constant of 1.3 ms. In addition, the P_M → F transition of the R. sphaeroides oxidase was also measured and also was shown to have two phases of electrogenic proton transfer, with τ values of 0.18 and 0.85 ms.     

Monte Carlo study of the influence of energy spectra,mesh size,high Z element on dose and PVDR based on 1-D and 3-D heterogeneous mouse head phantom for Microbeam Radiation Therapy

PurposeTo evaluate the influence of energy spectra, mesh sizes, high Z element on dose and PVDR in Microbeam Radiation Therapy (MRT) based on 1-D analogy-mouse-head-model (1-D MHM) and 3-D voxel-mouse-head-phantom (3-D VMHP) by Monte Carlo simulation.MethodsA Microbeam-Array-Source-Model was implemented into EGSnrc/DOSXYZnrc. The microbeam size is assumed to be 25 μm, 50 μm or 75 μm in thickness and fixed 1 mm in height with 200 μm c-t-c. The influence of the energy spectra of ID17@ESRF and BMIT@CLS were investigated. The mesh size was optimized. PVDR in 1-D MHM and 3-D VMHP was compared with the homogeneous water phantom. The arc influence of 3-D VMHP filled with water (3-D VMHWP) was compared with the rectangle phantom.ResultsPVDR of the lower BMIT@CLS spectrum is 2.4 times that of ID17@ESRF for lower valley dose. The optimized mesh is 5 µm for 25 µm, and 10 µm for 50 µm and 75 µm microbeams with 200 µm c-t-c. A 500 μm skull layer could make PVDR difference up to 62.5% for 1-D MHM. However this influence is limited (<5%) for the farther homogeneous media (e.g. 600 µm). The peak dose uniformity of 3-D VMHP at the same depth could be up to 8% for 1.85 mm × 1 mm irradiation field, whereas that of 3-D VMHWP is <1%. The high Z element makes the dose uniformity enhance in target. The surface arc could affect the superficial PVDR (from 44% to 21% in 0.2 mm depth), whereas this influence is limited for the more depth (<1%).ConclusionAn accurate MRT dose calculation algorithm should include the influence of 3-D heterogeneous media.     

Novel 6 MV X-ray photoneutron detection and dosimetry of medical accelerators

PurposeDosimetry of fast, epithermal and thermal photoneutrons in 6 MV X-ray beams of two medical accelerators were studied by novel dosimetry methods.MethodsA Siemens ONCOR and an Elekta COMPACT medical accelerators were used. Fast, epithermal and thermal photoneutron dose equivalents in 10 cm × 10 cm 6 MV X-rays fields were determined in air and on surface of a polyethylene phantom in X and Y directions. Polycarbonate dosimeters as bare or with enriched ¹⁰B convertors (with or without cadmium covers) were used applying a 50 Hz-HV electrochemical etching method.ResultsFast, epithermal and thermal photoneutron dose equivalents were efficiently determined respectively as ∼1145.8, ∼45.3 and ∼170.6 μSv in air and ∼1888.5, ∼96.1 and ∼640.6 μSv on phantom per 100 Gy X-rays at the isocenter of Siemens ONCOR accelerator in air. The dose equivalent is maximum at the isocenter which decreases as distance from it increases reaching a constant level. Tissue-to-air ratios are constants up to 15 cm from the isocenter. No photoneutrons was detected in the Elekta COMPACT accelerator.ConclusionsFast, epithermal and thermal photoneutron dosimetry of 6 MV X-rays were made by novel dosimetry methods in a Siemens ONCOR accelerator with sum dose equivalent per Gy of ∼0.0014% μSv with ∼0.21 MeV mean energy at the isocenter; i.e. ∼150 times smaller than that of 18 MV X-rays. This observation assures clinical safety of 6 MV X-rays in particular in single-mode machines like Elekta COMPACT producing no photoneutrons due to no “beryllium exit window” in the head structure.     

Energy spectrum and dose enhancement due to the depth of the Lipiodol position using flattened and unflattened beams

Aim

Lipiodol was used for stereotactic body radiotherapy combining trans arterial chemoembolization. Lipiodol used for tumour seeking in trans arterial chemoembolization remains in stereotactic body radiation therapy. In our previous study, we reported the dose enhancement effect in Lipiodol with 10× flattening-filter-free (FFF). The objective of our study was to evaluate the dose enhancement and energy spectrum of photons and electrons due to the Lipiodol depth with flattened (FF) and FFF beams.

First proof of bismuth oxide nanoparticles as efficient radiosensitisers on highly radioresistant cancer cells

This study provides the first proof of the novel application of bismuth oxide as a radiosensitiser. It was shown that on the highly radioresistant 9L gliosarcoma cell line, bismuth oxide nanoparticles sensitise to both kilovoltage (kVp) or megavoltage (MV) X-rays radiation. 9L cells were exposed to a concentration of 50 μg.mL⁻¹ of nanoparticle before irradiation at 125 kVp and 10 MV. Sensitisation enhancement ratios of 1.48 and 1.25 for 125 kVp and 10 MV were obtained in vitro, respectively. The radiation enhancement of the nanoparticles is postulated to be a combination of the high Z nature of the bismuth (Z = 83), and the surface chemistry. Monte Carlo simulations were performed to elucidate the physical interactions between the incident radiation and the nanoparticle. The results of this work show that Bi₂O₃ nanoparticles increase the radiosensitivity of 9L gliosarcoma tumour cells for both kVp and MV energies. Monte Carlo simulations demonstrate the advantage of a platelet morphology.     

Dietary supplementation of green synthesized manganese-oxide nanoparticles and its effect on growth performance,muscle composition and digestive enzyme activities of the giant freshwater prawn Macrobrachium rosenbergii

The green synthesized Mn₃O₄ nanoparticles (manganese-oxide nanoparticles) using Ananas comosus (L.) peel extract was characterized by various techniques. HR-SEM photograph showed that manganese-oxide nanoparticles (Mn-oxide NPs) were spherical in shape, with an average size of 40–50 nm. The Zeta potential revealed the surface charge of Mn-oxide NPs to be negative. Further, the Mn-oxide NPs were dietary supplemented for freshwater prawn Macrobrachium rosenbergii. The experimental basal diets were supplemented with Mn-oxide NPs at the rates of 0 (control), 3.0, 6.0, 9.0, 12, 15 and 18 mg/kg dry feed weight. The as-supplemented Mn-oxide NPs were fed in M. rosenbergii for a period of 90 days. The experimental study demonstrated that prawns fed with diet supplemented with 3–18 mg Mn-oxide NPs/kg shows enhanced (P < 0.05) growth performance, including final weight and weight gain (WG). Significant differences (P < 0.05) in feed conversion ratio (FCR) were observed in prawn fed with different diets. Additionally, prawns fed with 3.0–18 mg/kg Mn-oxide NPs supplemented diets achieved significant (P < 0.05) improvement in growth performance, digestive enzyme activities and muscle biochemical compositions, while, the prawns fed with 16 mg/kg of Mn-oxide NPs showed enhanced performance. Prawns fed on diet supplemented with 16 mg/kg Mn-oxide NPs showed significantly (P < 0.05) higher total protein level. The antioxidants enzymatic activity (SOD and CAT) metabolic enzymes status in muscle and hepatopancreas showed no significant (P > 0.05) alterations in prawns fed with 3.0–18 mg/kg of Mn-oxide NPs supplemented diets. Consequently, the present work proposed that 16 mg/kg of Mn-oxide NPs could be supplemented for flexible enhanced survival, growth and production of M. rosenbergii. Therefore, the data of the present study recommend the addition of 16 mg/kg of Mn-oxide NPs diet to developed prawn growth and antioxidant defense system.     

Antioxidant and cytotoxic effect of biologically synthesized selenium nanoparticles in comparison to selenium dioxide

The present study was designed to evaluate antioxidant and cytotoxic effect of selenium nanoparticles (Se NPs) biosynthesized by a newly isolated marine bacterial strain Bacillus sp. MSh-1. An organic–aqueous partitioning system was applied for purification of the biogenic Se NPs and the purified Se NPs were then investigated for antioxidant activity using DPPH scavenging activity and reducing power assay. Cytotoxic effect of the biogenic Se NPs and selenium dioxide (SeO₂) on MCF-7 cell line was assesed by MTT assay. Tranmission electron micrograph (TEM) of the purified Se NPs showed individual and spherical nanostructure in size range of about 80–220 nm. The obtained results showed that, at the same concentration of 200 μg/mL, Se NPs and SeO₂ represented scavenging activity of 23.1 ± 3.4% and 13.2 ± 3.1%, respectively. However, the data obtained from reducing power assay revealed higher electron-donating activity of SeO₂ compared to Se NPs. Higher IC₅₀ of the Se NPs (41.5 ± 0.9 μg/mL) compared to SeO₂ (6.7 ± 0.8 μg/mL) confirmed lower cytotoxicity of the biogenic Se NPs on MCF-7 cell line.     

High activity and selectivity immobilized lipase on Fe3O4 nanoparticles for banana flavour synthesis

Lipase (E.C.3.1.1.3) from Thermomyces lanuginosus (TL) was directly bonded, through multiple physical interactions, on citric acid functionalized monodispersed Fe₃O₄ nanoparticles (NPs) in presence of a small amount of hydrophobic functionalities. A very promising scalable synthetic approach ensuring high control and reproducibility of the results, and an easy and green immobilization procedure was chosen for NPs synthesis and lipase anchoring. The size and structure of magnetic nanoparticles were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The samples at different degree of functionalization were analysed through thermogravimetric measurements. Lipase immobilization was further confirmed by enzymatic assay and Fourier transform infrared (FT-IR) spectra. Immobilized lipase showed a very high activity recovery up to 144% at pH = 7 and 323% at pH = 7.5 (activity of the immobilized enzyme compared to that of its free form). The enzyme, anchored to the Fe₃O₄ nanoparticles, to be easy recovered and reused, resulted more stable than the native counterpart and useful to produce banana flavour. The immobilized lipase results less sensitive to the temperature and pH, with the optimum temperature higher of 5 °C and optimum pH up shifted to 7.5 (free lipase optimum pH = 7.0). After 120 days, free and immobilized lipases retained 64% and 51% of their initial activity, respectively. Ester yield at 40 °C for immobilized lipase reached 88% and 100% selectivity.     

Immobilization of glucose oxidase onto cobalt based on silica core/shell nanoparticles as carrier

Co–B/SiO₂/NH₂ magnetic nanoparticles (NPs) were prepared from a silica shell-coated Co–B core using the Stöber method and amine-modification on the surface. Glucose oxidase (GOD) was covalently immobilized on the surface of Co–B/SiO₂/NH₂ NPs using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) as an activating agent. The magnetic NPs characteristics, such as the synthesis of Co–B/SiO₂/NH₂ NPs, effect of pH, temperature, and concentration of buffer for enzyme immobilization, were investigated. The optimal reaction conditions for immobilization were determined to be 0.1 M of phosphate buffer solution, pH 7.0, and 5 °C. In the case of immobilized GOD without d-glucose and with 0.1 M of d-glucose for blocking, 22.98 U/g and 24.83 U/g of their original activity were retained after 7 reuses, respectively.     

Fluorescence microscopy colocalization of lipid–nucleic acid nanoparticles with wildtype and mutant Rab5–GFP: A platform for investigating early endosomal events

Endosomal entrapment is known to be a major bottleneck to successful cytoplasmic delivery of nucleic acids (NAs) using cationic liposome–NA nanoparticles (NPs). Quantitative measurements of distributions of NPs within early endosomes (EEs) have proven difficult due to the sub-resolution size and short lifetime of wildtype EEs. In this study we used Rab5–GFP, a member of the large family of GTPases which cycles between the plasma membrane and early endosomes, to fluorescently label early endosomes. Using fluorescence microscopy and quantitative image analysis of cells expressing Rab5–GFP, we found that at early time points (t < 1 h), only a fraction (≈ 35%) of RGD-tagged NPs (which target cell surface integrins) colocalize with wildtype EEs, independent of the NP's membrane charge density. In comparison, a GTP-hydrolysis deficient mutant, Rab5–Q79L, which extends the size and lifetime of EEs yielding giant early endosomes (GEEs), enabled us to resolve and localize individual NPs found within the GEE lumen. Remarkably, nearly all intracellular NPs are found to be trapped within GEEs implying little or no escape at early time points. The observed small degree of colocalization of NPs and wildtype Rab5 is consistent with recycling of Rab5–GDP to the plasma membrane and not indicative of NP escape from EEs. Taken together, our results show that endosomal escape of PEGylated nanoparticles occurs downstream of EEs i.e., from late endosomes/lysosomes. Our studies also suggest that Rab5–Q79L could be used in a robust imaging assay which allows for direct visualization of NP interactions with the luminal membrane of early endosomes.     

Fabrication of two- and three-dimensional model catalyst systems with monodispersed platinum nanoparticles as active metal building blocks

Well-defined Pt monodispersed nanoparticles within the catalytically relevant 1–10 nm size regime were synthesized in solution phase by several synthetic methods which differed in the choice of reducing agent, surface stabilizer, reaction temperature and solvent. Three-dimensional model catalysts were fabricated by incorporating the metal nanoparticles into ordered channels of high surface area mesoporous oxides such as SiO₂, Al₂O₃ and Ta₂O₅ through either sonication or direct synthesis of the oxide support around the particles. Deposition of the same nanocrystals onto silica supports by means of the Langmuir–Schaeffer technique produced two-dimensional model catalysts.     

Potential of using cerium oxide nanoparticles for protecting healthy tissue during accelerated partial breast irradiation (APBI)

The purpose of this study is to investigate the feasibility of using cerium oxide nanoparticles (CONPs) as radical scavengers during accelerated partial breast irradiation (APBI) to protect normal tissue. We hypothesize that CONPs can be slowly released from the routinely used APBI balloon applicators—via a degradable coating—and protect the normal tissue on the border of the lumpectomy cavity over the duration of APBI. To assess the feasibility of this approach, we analytically calculated the initial concentration of CONPs required to protect normal breast tissue from reactive oxygen species (ROS) and the time required for the particles to diffuse to various distances from the lumpectomy wall. Given that cerium has a high atomic number, we took into account the possible inadvertent dose enhancement that could occur due to the photoelectric interactions with radiotherapy photons. To protect against a typical MammoSite treatment fraction of 3.4 Gy, 5 ng·g⁻¹ of CONPs is required to scavenge hydroxyl radicals and hydrogen peroxide. Using 2 nm sized NPs, with an initial concentration of 1 mg·g⁻¹, we found that 2–10 days of diffusion is required to obtain desired concentrations of CONPs in regions 1–2 cm away from the lumpectomy wall. The resultant dose enhancement factor (DEF) is less than 1.01 under such conditions. Our results predict that CONPs can be employed for radioprotection during APBI using a new design in which balloon applicators are coated with the NPs for sustained/controlled in-situ release from within the lumpectomy cavity.     

Experimental optimisation of the X-ray energy in microbeam radiation therapy

Microbeam radiation therapy has demonstrated superior normal tissue sparing properties compared to broadbeam radiation fields. The ratio of the microbeam peak dose to the valley dose (PVDR), which is dependent on the X-ray energy/spectrum and geometry, should be maximised for an optimal therapeutic ratio. Simulation studies in the literature report the optimal energy for MRT based on the PVDR. However, most of these studies have considered different microbeam geometries to that at the Imaging and Medical Beamline (50 μm beam width with a spacing of 400 μm). We present the first fully experimental investigation of the energy dependence of PVDR and microbeam penumbra. Using monochromatic X-ray energies in the range 40–120 keV the PVDR was shown to increase with increasing energy up to 100 keV before plateauing. PVDRs measured for pink beams were consistently higher than those for monochromatic energies similar or equivalent to the average energy of the spectrum. The highest PVDR was found for a pink beam average energy of 124 keV. Conversely, the microbeam penumbra decreased with increasing energy before plateauing for energies above 90 keV. The effect of bone on the PVDR was investigated at energies 60, 95 and 120 keV. At depths greater than 20 mm beyond the bone/water interface there was almost no effect on the PVDR. In conclusion, the optimal energy range for MRT at IMBL is 90–120 keV, however when considering the IMBL flux at different energies, a spectrum with 95 keV weighted average energy was found to be the best compromise.     

Application of chitosan beads immobilized Rhodococcus sp. NCIM 2891 cholesterol oxidase for cholestenone production

The cell-bound cholesterol oxidase from the Rhodococcus sp. NCIM 2891 was purified three fold by diethylaminoethyl–sepharose chromatography. The estimated molecular mass (SDS-PAGE) and K_m of the enzyme were ∼55.0 kDa and 151 μM, respectively. The purified cholesterol oxidase was immobilized on chitosan beads by glutaraldehyde cross-linking reaction and immobilization was confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray analysis. The optimum temperature (45 °C, 5 min) for activity of the enzyme was increased by 5 °C after immobilization. Both the free and immobilized cholesterol oxidases were found to be stable in many organic solvents except for acetone. Fe²⁺ and Pb²⁺ at 0.1 mM of each acted as inhibitors, while Ag⁺, Ca²⁺, Ni²⁺ and Zn²⁺ activated the enzyme at similar concentration. The biotransformation of cholesterol (3.75 mM) with the cholesterol oxidase immobilized beads (3.50 U) leads to ∼88% millimolar yield of cholestenone in a reaction time of 9 h at 25 °C. The immobilized enzyme retains ∼67% activity even after 12 successive batches of operation. The biotransformation method thus, shows a great promise for the production of pharmaceutically important cholestenone.     

Quantifying the Usefulness of Oxide-Encapsulated Silver Nanoparticles in Semiconducting Films

Incorporating plasmonic nanoparticles (NPs) in an organic solar cell (OSC) can improve device performance. In our simulation studies, at NP resonance, absorption in poly(3-hexythiophene)/phenyl-C61-butyric acid methyl ester (P3HT/PCBM) can be increased by encapsulating 50 nm Ag NPs with Al₂O₃, HfO₂, MoO₃, and SiO₂. At Ag NP resonance, when the oxide thickness is significant enough, oxides with high relative permittivity induces a higher electric field enhancement at the metal/dielectric interface. This is translated to improved absorption in the polymer layer. By integrating against AM1.5G, overall absorption in P3HT/PCBM is improved when incorporating Ag NPs encapsulated with a thin oxide shell into the polymer film. However, polymeric absorption loss is induced for oxide-encapsulated Ag NPs if MoO₃ and SiO₂ shells are more than 5 nm. For Al₂O₃ and HfO₂, Ag NPs should not be encapsulated with shells thicker than 10 nm. Modeling studies are also extended to absorption in a CH₃NH₃PbI₃ perovskite layer. It is revealed that both Al₂O₃ and HfO₂ have an optimal shell thickness of about 20 nm to ensure maximum absorption in CH₃NH₃PbI₃. The results can be utilized as a useful guideline when designing photovoltaics from an optical point of view.     

Interaction of SiO2 nanoparticles with neuronal cells: Ionic mechanisms involved in the perturbation of calcium homeostasis

SiO₂ nanoparticles (NPs), in addition to their widespread utilization in consumer goods, are also being engineered for clinical use. They are considered to exert low toxicity both in vivo and in vitro, but the mechanisms involved in the cellular responses activated by these nanoobjects, even at non-toxic doses, have not been characterized in detail. This is of particular relevance for their interaction with the nervous system: silica NPs are good candidates for nanoneuromedicine applications. Here, by using two neuronal cell lines (GT1–7 and GN11 cells), derived from gonadotropin hormone releasing hormone (GnRH) neurons, we describe the mechanisms involved in the perturbation of calcium signaling, a key controller of neuronal function. At the non-toxic dose of 20 μg mL⁻¹, 50 nm SiO₂ NPs induce long lasting but reversible calcium signals, that in most cases show a complex oscillatory behavior. Using fluorescent NPs, we show that these signals do not depend on NPs internalization, are totally ascribable to calcium influx and are dependent in a complex way from size and surface charge. We provide evidence of the involvement of voltage-dependent and transient receptor potential-vanilloid 4 (TRPV4) channels.