Nucleotide sequence and deletion analysis of the xylanase gene (xynZ) of Clostridium thermocellum.

The nucleotide sequence of the xynZ gene, encoding the extracellular xylanase Z of Clostridium thermocellum, was determined. The putative xynZ gene was 2,511 base pairs long and encoded a polypeptide of 837 amino acids. A region of 60 amino acids containing a duplicated segment of 24 amino acids was found between residues 429 and 488 of xylanase Z. This region was strongly similar to the conserved domain found at the carboxy-terminal ends of C. thermocellum endoglucanases A, B, and D. Deletions removing up to 508 codons from the 5' end of the gene did not affect the activity of the encoded polypeptide, showing that the active site was located in the C-terminal half of the protein and that the conserved region was not involved in catalysis. Expression of xylanase activity in Escherichia coli was increased up to 220-fold by fusing fragments containing the 3' end of the gene with the start of lacZ present in pUC19. An internal translational initiation site which was efficiently recognized in E. coli was tentatively identified 470 codons downstream from the actual start codon.     

Sequence of xynC and properties of XynC, a major component of the Clostridium thermocellum cellulosome.

The nucleotide sequence of the Clostridium thermocellum F1 xynC gene, which encodes the xylanase XynC, consists of 1,857 bp and encodes a protein of 619 amino acids with a molecular weight of 69,517. XynC contains a typical N-terminal signal peptide of 32 amino acid residues, followed by a 165-amino-acid sequence which is homologous to the thermostabilizing domain. Downstream of this domain was a family 10 catalytic domain of glycosyl hydrolase. The C terminus separated from the catalytic domain by a short linker sequence contains a dockerin domain responsible for cellulosome assembly. The N-terminal amino acid sequence of XynC-II, the enzyme purified from a recombinant Escherichia coli strain, was in agreement with that deduced from the nucleotide sequence although XynC-II suffered from proteolytic truncation by a host protease(s) at the C-terminal region. Immunological and N-terminal amino acid sequence analyses disclosed that the full-length XynC is one of the major components of the C. thermocellum cellulosome. XynC-II was highly active toward xylan and slightly active toward p-nitrophenyl-beta-D-xylopyranoside, p-nitrophenyl-beta-D-cellobioside, p-nitrophenyl-beta-D-glucopyranoside, and carboxymethyl cellulose. The Km and Vmax values for xylan were 3.9 mg/ml and 611 micromol/min/mg of protein, respectively. This enzyme was optimally active at 80 degrees C and was stable up to 70 degrees C at neutral pHs and over the pH range of 4 to 11 at 25 degrees C.     

Nucleotide sequence and deletion analysis of the cellulase-encoding gene celH of Clostridium thermocellum

The complete nucleotide sequence of the celH gene of Clostridium thermocellum was determined. The open reading frame extended over 2.7-kb DNA fragment and encoded a 900-amino acid (aa) protein (Mr 102,301) which hydrolyzes carboxymethylcellulose, p-nitrophenyl-beta-D-cellobioside, methylumbelliferyl- beta-D-cellobioside, barley beta-glucan, and larchwood xylan. The N terminus showed a typical signal peptide, and a cleavage site after Ser44 was predicted. Two Pro-Thr-Ser-rich regions divided the protein into three approximately equal domains. The central 328-aa region was similar to the N-terminal part, carrying the active site, of C. thermocellum endoglucanase E (EGE; 30.2%). The C-terminal region ended with two conserved 24-aa stretches showing close similarity with those previously described in EGA, EGB, EGD, EGE, EGX, and xylanase from C. thermocellum. Deletions of celH removing up to 327 codons from the 5' end and up to 245 codons from the 3' end of the coding sequence did not affect enzyme activity, confirming that the central domain was indeed responsible for catalytic activity. Production of truncated EGH in Escherichia coli was increased up to 120-fold by fusing fragments containing the 3' portion of the gene with the start of lacZ' present in pTZ19R.     

Purification and properties of the endoglucanase C of Clostridium thermocellum produced in Escherichia coli

The celC gene, which codes for a new endoglucanase of Clostridium thermocellum, termed endoglucanase C, was found to be expressed when cloned in Escherichia coli. The enzyme was purified to electrophoretic homogeneneity from E. coli and its biochemical properties were studied. It differs from the previously studied endoglucanases A and B. In particular, endoglucanase C displays features common to endo- and exoglucanases, since it had a high activity on carboxymethylcellulose and on p-nitrophenyl-beta-D-cellobioside where only the agluconic bond was split. In addition, the enzyme was able to release cellobiose units from G3, G4 and G5 cellodextrins. Endoglucanase C was characterized by Western blot in a culture supernatant from C. thermocellum grown on cellulose, using an antiserum raised against the enzyme produced by E. coli.     

Cloning and expression of the Clostridium thermocellum L-lactate dehydrogenase gene in Escherichia coli and enzyme characterization

The structural gene for L-lactate dehydrogenase (LDH) (EC.1.1.1.27) from Clostridium thermocellum 27405 was cloned in Escherichia coli by screening the Lambda Zap II phage library of C. thermocellum genomic DNA. In one positive clone, an open reading frame of 948 base pairs corresponded to C. thermocellum ldh gene encoding for the predicted 315-residue protein. The ldh gene was successfully expressed in E. coli FMJ39 (ldh mutant) under the lac promoter. The recombinant enzyme was partially purified from E. coli cell extracts and its kinetic properties were determined. Clostridium thermocellum LDH was shown to catalyze a highly reversible reaction and to be an allosteric enzyme that is activated by fructose-1,6-diphosphate (FDP). For pyruvate, partially purified LDH had Km and Vmax values of 7.3 mmol/L and 87 micromol/min, respectively, and in the presence of FDP, a 24-fold decrease in Km and a 5.7-fold increase in Vmax were recorded. The enzyme exhibited no marked catalytic activity for lactate in the absence of FDP, whereas Km and Vmax values were 59.5 mmol/L and 52 micromol/min, respectively, in its presence. The enzyme did not lose activity when incubated at 65 degrees C for 5 min.     

Nucleotide sequence of the celC gene encoding endoglucanase C of Clostridium thermocellum

The nucleotide sequence of the cellulase gene celC, encoding endoglucanase C of Clostridium thermocellum, has been determined. The coding region of 1032 bp was identified by comparison with the N-terminal amino acid (aa) sequence of endoglucanase C purified from Escherichia coli. The ATG start codon is preceded by an AGGAGG sequence typical of ribosome-binding sites in Gram-positive bacteria. The derived amino acid sequence corresponds to a protein of Mr 40,439. Amino acid analysis and apparent Mr of endoglucanase C are consistent with the amino acid sequence as derived from the DNA sequencing data. A proposed N-terminal 21-aa residue leader (signal) sequence differs from other prokaryotic signal peptides and is non-functional in E. coli. Most of the protein bears no resemblance to the endoglucanases A, B, and D of the same organism. However, a short region of homology between endoglucanases A and C was identified, which is similar to the established active sites of lysozymes and to related sequences of fungal cellulases.     

Cloning of Clostridium thermocellum endoglucanase genes in Escherichia coli

Six independent and distinct cel genes coding endoglucanases have been selected from C. thermocellum pUC19-based gene bank in E. coli TG1. E. coli-derived Cel-proteins possessing Mr from 39,000 to 61,000 are able to cleave lichenan, as well as xylan and carboxymethyl cellulose. Cel 7- and Cel 8-endoglucanases are characterized by cellobiohydrolase type substrate specificity, being able to cleave model fluorogenic aryldisaccharide substrate MU-G2. The clone pCU110 (cel 7) produces about 10-fold more endoglucanase activity than other clones.     

Sequence of the Clostridium thermocellum mannanase gene man26B and characterization of the translated product

The man26B gene of Clostridium thermocellum strain F1 was found in pKS305, which had been selected as a recombinant plasmid conferring endoglucanase activity on Escherichia coli. The open reading frame of man26B consists of 1,773 nucleotides encoding a protein of 591 amino acids with a predicted molecular weight of 67,047. Man26B is a modular enzyme composed of an N-terminal signal peptide and three domains in the following order: a mannan-binding domain, a family 26 mannanase domain, and a dockerin domain responsible for cellulosome assembly. We found that this gene was a homologue of the man26A gene of C. thermocellum strain YS but that there were insertion or deletion mutations that caused a frame-shift mutation affecting a stretch of 26 amino acids in the catalytic domain. Man26B devoid of the dockerin domain was constructed and purified from a recombinant E. coli, and its enzyme properties were examined. Immunological analysis indicated that Man26B was a catalytic component of the C. thermocellum F1 cellulosome.     

Cloning and expression of Clostridium thermocellum genes coding for thermostable exoglucanases (cellobiohydrolases) in Escherichia coli cells

By special screening approach two independent Cl. thermocellum genes directing the synthesis of thermostable glucanases with an exo-mode of action have been isolated from pUC19-based gene bank in E. coli TG1. The genes are located on 3.4 and 11.3 kb DNA fragments showing no homology. E. coli-derived exoglucanases, presumably, cellobiohydrolases, are able to cleave lichenan, carboxymethyl cellulose, xylan and p-nitrophenyl derivatives of cellobioside and lactoside. Cellobiose is the main degradation product of carboxymethyl cellulose, treated with the identified exoglucanases. With p-nitrophenil-beta-D-cellobioside as substrate the enzymes had a pH optimum around 6.5 and a temperature optimum at 65 degrees C. The identified and expressed enzymes differ from all other Cl. thermocellum proteins known to date.     

Cellobiohydrolase from Clostridium thermocellum, synthesized by a recombinant E. coli strain]

Clostridium thermocellum cellobiohydrolase was isolated in preparative amounts from the recombinant strain of E. coli K12 C600 carrying plasmid pCU 304 with a C. thermocellum chromosomal DNA insertion. The isolation procedure included chromatography on Ultrogel AcA 44, ion-exchange chromatography on DEAE-Sepharose CL-6B, rechromatography on Ultrogel and FPLC on Mono Q resulting in a 17.6% yield and 1530-fold purification. According to data from sodium dodecylsulfate polyacrylamide gel electrophoresis performed under nondenaturing conditions and analytical gel isoelectrofocusing, the enzyme preparation contains only one active protein band with Mr 56.2 +/- 1.0 kDa and pI 4.15. The enzyme does not reduce the viscosity of the CM-cellulose solution but forms reducing sugars from this soluble substrate. Cellobiose (93-97%) is the major component produced by the enzyme from crystalline and amorphous cellulose (specific activity 2.3 x 10(-3) and 2.8 x 10(-2) U/mg, respectively). The activity optimum of the enzyme is at pH 5.6, 60 degrees C. The half-inactivation time at 60 degrees C and 65 degrees C is 450 and 15.5 min, respectively. The action pattern of the enzyme on the low molecular fluorogenic cellooligosaccharides suggests that the enzyme pertains to typical cellobiohydrolases.     

Isolation and properties of a major cellobiohydrolase from the cellulosome of Clostridium thermocellum.

In the anaerobic, thermophilic, cellulolytic bacterium Clostridium thermocellum, efficient solubilization of the insoluble cellulose substrate is accomplished largely through the action of a cellulose-binding multienzyme complex, the cellulosome. A major cellobiohydrolase activity from the cellulosome has been traced to its Mr 75,000 S8 subunit, and an active fragment of this subunit was prepared by a novel procedure involving limited proteolytic cleavage. The truncated Mr 68,000 fragment, termed S8-tr, was purified by gel filtration and high-performance ion-exchange chromatography. The purified protein adsorbed weakly to amorphous cellulose, and its enzymatic action yielded cellobiose as the major end product from both amorphous and crystalline cellulose preparations. The high ratio of exo- to endo-beta-glucanase activities was supported by viscosimetric measurements. The use of model substrates showed that the smallest cellodextrin to be degraded was cellotetraose, but cellopentaose was degraded at a much greater rate. Cellobiose dramatically inhibited the cellulolytic activities. In the absence of calcium or other bivalent metal ions, both the truncated cellobiohydrolase activity of S8-tr and the true cellulase activity of the parent cellulosome were relatively unstable at temperatures above 50 degrees C. Cysteine further enhanced the stabilizing effect of calcium. This is the first report of a defined cellobiohydrolase in C. thermocellum. Its association with the cellulosome and the correspondence of several of their major distinctive properties suggest that this cellobiohydrolase plays a key role in the solubilization of cellulose by the intact cellulosomal complex.     

Characterization of an acetyl xylan esterase from the anaerobic fungus Orpinomyces sp. strain PC-2.

A 1,067-bp cDNA, designated axeA, coding for an acetyl xylan esterase (AxeA) was cloned from the anaerobic rumen fungus Orpinomyces sp. strain PC-2. The gene had an open reading frame of 939 bp encoding a polypeptide of 313 amino acid residues with a calculated mass of 34,845 Da. An active esterase using the original start codon of the cDNA was synthesized in Escherichia coli. Two active forms of the esterase were purified from recombinant E. coli cultures. The size difference of 8 amino acids was a result of cleavages at two different sites within the signal peptide. The enzyme released acetate from several acetylated substrates, including acetylated xylan. The activity toward acetylated xylan was tripled in the presence of recombinant xylanase A from the same fungus. Using p-nitrophenyl acetate as a substrate, the enzyme had a K(m) of 0.9 mM and a V(max) of 785 micromol min(-1) mg(-1). It had temperature and pH optima of 30 degrees C and 9.0, respectively. AxeA had 56% amino acid identity with BnaA, an acetyl xylan esterase of Neocallimastix patriciarum, but the Orpinomyces AxeA was devoid of a noncatalytic repeated peptide domain (NCRPD) found at the carboxy terminus of the Neocallimastix BnaA. The NCRPD found in many glycosyl hydrolases and esterases of anaerobic fungi has been postulated to function as a docking domain for cellulase-hemicellulase complexes, similar to the dockerin of the cellulosome of Clostridium thermocellum. The difference in domain structures indicated that the two highly similar esterases of Orpinomyces and Neocallimastix may be differently located, the former being a free enzyme and the latter being a component of a cellulase-hemicellulase complex. Sequence data indicate that AxeA and BnaA might represent a new family of hydrolases.     

Nucleotide sequence of the celG gene of Clostridium thermocellum and characterization of its product, endoglucanase CelG.

The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.     

Functions of family-22 carbohydrate-binding module in Clostridium thermocellum Xyn10C

Clostridium thermocellum xylanase Xyn10C (formerly XynC) is a modular enzyme, comprising a family-22 carbohydrate-binding module (CBM), a family-10 catalytic module of the glycoside hydrolases, and a dockerin module responsible for cellulosome assembly consecutively from the N-terminus. To study the functions of the CBM, truncated derivatives of Xyn10C were constructed: a recombinant catalytic module polypeptide (rCM), a family-22 CBM polypeptide (rCBM), and a polypeptide composed of the family-22 CBM and CM (rCBM-CM). The recombinant proteins were characterized by enzyme and binding assays. Although the catalytic activity of rCBM-CM toward insoluble xylan was four times higher than that of rCM toward the same substrate, removal of the CBM did not severely affect catalytic activity toward soluble xylan or beta-1,3-1,4-glucan. rCBM showed an affinity for amorphous celluloses and insoluble and soluble xylan in qualitative binding assays. The optimum temperature of rCBM-CM was 80 degrees C and that of rCM was 60 degrees C. These results indicate that the family-22 CBM of C. thermocellum Xyn10C not only was responsible for the binding of the enzyme to the substrates, but also contributes to the stability of the CM in the presence of the substrate at high temperatures.     

Identification of the cellulose-binding domain of the cellulosome subunit S1 from Clostridium thermocellum YS

The 3' region of a gene designated cipB, which shows strong homology with cipA that encodes the cellulosome SL subunit of Clostridium thermocellum ATCC 27405, was isolated from a gene library of C. thermocellum strain YS. The truncated S1 protein encoded by the cipB derivative bound tightly to cellulose. The cellulose-binding domain in this polypeptide consisted of a C-terminal proximal 167 residue sequence which showed complete identity with residues 337-503 of mature SL from C. thermocellum strain ATCC 27405. The cellulose-binding domain interacted with both crystalline and amorphous cellulose, but not with xylan.     

Influence of the transposition of the thermostabilizing domain of Clostridium thermocellum xylanase (XynX) on xylan binding and thermostabilization

A xylanase gene, xynX, of Clostridium thermocellum had one thermostabilizing domain (TSD) between the signal peptide sequence and the catalytic domain (CD). The TSD of a truncated xylanase gene, xynX'(TSD-CD), was transpositioned from the N terminus to the C terminus of the CD by overlapping PCRs, and a modified product, xynX'(CD-TSD), was constructed. XynX'(TSD-CD) had a higher optimum temperature (70 degrees C versus 65 degrees C) and was more thermostable (residual activity of 68% versus 46% after a 20-min preincubation at 70 degrees C) than the one without the TSD, XynX'(CD). However, the domain-transpositioned enzyme, XynX'(CD-TSD), showed a lower optimum temperature (30 degrees C) and thermostability (20%) than XynX'(CD). Both XynX'(TSD-CD) and XynX'(CD-TSD) showed significantly higher binding capacity toward xylan than XynX'(CD), and the domain transposition did not cause any change in the binding ability. XynX'(TSD-CD) and XynX'(CD-TSD) also showed considerable binding to lichenan but not to carboxymethyl cellulose and laminarin. XynX'(TSD-CD) and XynX'(CD-TSD) had higher activities for insoluble xylan than XynX'(CD), while XynX'(CD) was more active against soluble xylan than XynX'(TSD-CD) and XynX'(CD-TSD). These results indicate that the TSD of XynX has dual functions, xylan binding and thermostabilization, and the domain should also be classified as a xylan-binding domain (XBD). The binding capacity of the XBD was not affected by domain transpositioning within the gene.     

Clostridium thermocellum cellulase CelT,a family 9 endoglucanase without an Ig-like domain or family 3c carbohydrate-binding module

The celT gene of Clostridium thermocellum strain F1 was found downstream of the mannanase gene man26B [Kurokawa J et al. (2001) Biosci Biotechnol Biochem 65:548–554] in pKS305. The open reading frame of celT consists of 1,833 nucleotides encoding a protein of 611 amino acids with a predicted molecular weight of 68,510. The mature form of CelT consists of a family 9 cellulase domain and a dockerin domain responsible for cellulosome assembly, but lacks a family 3c carbohydrate-binding module (CBM) and an immunoglobulin (Ig)-like domain, which are often found with family 9 catalytic domains. CelT devoid of the dockerin domain (CelTΔdoc) was constructed and purified from a recombinant Escherichia coli, and its enzyme properties were examined. CelTΔdoc showed strong activity toward carboxymethylcellulose (CMC) and barley β-glucan, and low activity toward xylan. The V _max and K _m values were 137 μmol min^–1 mg^–1 and 16.7 mg/ml, respectively, for CMC. Immunological analysis indicated that CelT is a catalytic component of the C. thermocellum F1 cellulosome. This is the first report describing the characterization of a family 9 cellulase without an Ig-like domain or family 3c CBM. Electronic Publication     

Structure of the cel-3 gene from Fibrobacter succinogenes S85 and characteristics of the encoded gene product, endoglucanase 3.

The cel-3 gene cloned from Fibrobacter succinogenes into Escherichia coli coded for the enzyme EG3, which exhibited both endoglucanase and cellobiosidase activities. The gene had an open reading frame of 1,974 base pairs, coding for a protein of 73.4 kilodaltons (kDa). However, the enzyme purified from the osmotic shock fluid of E. coli was 43 kDa. The amino terminus of the 43-kDa protein matched amino acid residue 266 of the protein coded for by the open reading frame, indicating proteolysis in E. coli. In addition to the 43-kDa protein, Western immunoblotting revealed a 94-kDa membranous form of the enzyme in E. coli and a single protein of 118 kDa in F. succinogenes. Thus, the purified protein appears to be a proteolytic degradation product of a native protein which was 94 kDa in E. coli and 118 kDa in F. succinogenes. The discrepancy between the molecular weight expected on the basis of the DNA sequence and the in vivo form may be due to anomalous migration during electrophoresis, to glycosylation of the native enzyme, or to fatty acyl substitution at the N terminus. One of two putative signal peptide cleavage sites bore a strong resemblance to known lipoprotein leader sequences. The purified 43-kDa peptide exhibited a high Km (53 mg/ml) for carboxymethyl cellulose but a low Km (3 to 4 mg/ml) for lichenan and barley beta-glucan. The enzyme hydrolyzed amorphous cellulose, and cellobiose and cellotriose were the major products of hydrolysis. Cellotriose, but not cellobiose, was cleaved by the enzyme. EG3 exhibited significant amino acid sequence homology with endoglucanase CelC from Clostridium thermocellum, and as with both CelA and CelC of C. thermocellum, it had a putative active site which could be aligned with the active site of hen egg white lysozyme at the highly conserved amino acid residues Asn-44 and Asp-52.     

Addition of cloned beta-glucosidase enhances the degradation of crystalline cellulose by the Clostridium thermocellum cellulose complex

A thermostable beta-glucosidase from Clostridium thermocellum which is expressed in Escherichia coli was used to determine the substrate specificity of the enzyme. A restriction map of the beta-glucosidase gene cloned in plasmid pALD7 was determined. Addition of the E. coli cell extract (containing the beta-glucosidase) to the cellulase complex from C. thermocellum increased the conversion of crystalline cellulose (Avicel) to glucose. The increase was specifically due to hydrolysis of the accumulated cellobiose. A cellulose degradation process using beta-glucosidase to assist the potent cellulase complex of C. thermocellum, as shown here can open the way for industrial saccharification of cellulose to glucose.