Decreased lateral aggregation of a variant recombinant fibrinogen provides insight into the polymerization mechanism

We analyzed the polymerization of BbetaA68T fibrinogen, the recombinant counterpart of fibrinogen Naples, a variant known to have decreased thrombin binding. When polymerized with equal thrombin concentrations, BbetaA68T fibrinogen had a longer lag time and lower rate of lateral aggregation, V(max), than normal recombinant fibrinogen, but a similar final turbidity. At thrombin concentrations that equalized the rates of fibrinopeptide A release, BbetaA68T fibrinogen polymerized with a lag time and V(max) similar to normal, but reached a significantly lower final turbidity. Similar results were produced when BbetaA68T was polymerized with Ancrod, which cleaves fibrinopeptide A at the same rate from either fibrinogen, and when BbetaA68T desA monomers were polymerized. The polymerization of desAB fibrin monomers, which circumvents fibrinopeptide release, was the same for both fibrinogens. We confirmed that turbidity was indicative of fiber thickness by scanning electron microscopy of fibrin clots. Here, we present the first experimental evidence of fibrin polymerization with a normal period of protofibril formation and rate of lateral aggregation, but with a significantly decreased extent of lateral aggregation. We conclude that the decreased lateral aggregation seen in BbetaA68T fibrinogen is due to an altered step in the enzymatic phase of its polymerization process. We propose that during normal polymerization a subtle conformational change in the E domain occurs, between the release of FpA and FpB, and that this change modulates the mechanism of lateral aggregation. Without this change, the lateral aggregation of BbetaA68T fibrinogen is impaired such that variant clots have thinner fibers than normal clots.     

Incorporation of thrombospondin into fibrin clots

Thrombospondin is a major platelet glycoprotein which is released from platelets during blood coagulation. We examined the interaction of thrombospondin with polymerizing fibrin. Thrombospondin, purified from human platelets and labeled with 125I, became incorporated into clots formed from both plasma and purified fibrinogen. Plasma clots contained somewhat less thrombospondin than clots formed from equivalent concentrations of fibrinogen. In plasma clots and fibrin clots formed in the presence of factor XIII, thrombospondin was cross-linked in the clot; thrombospondin in the supernatant remained largely monomeric. Cross-linking of thrombospondin by factor XIII, however, only slightly increased the amount of thrombospondin which was incorporated into the clot. In contrast, incorporation of 125I-fibronectin into clots was dependent upon cross-linking. Most of the incorporation of 125I-thrombospondin occurred during fibrin polymerization as judged by parallel studies of the incorporation of 125I-fibrinogen. The amount of thrombospondin incorporated into a clot was directly related to thrombospondin concentration and was only weakly dependent on fibrinogen concentration. Incorporation was not saturated at thrombospondin:fibrin (mol/mol) ratios as high as 2/1. Thrombospondin, however, modified the final structure of fibrin clots in a concentration-dependent manner as monitored by opacity. When tryptic digests of 125I-thrombospondin were studied, the 270-kilodalton core became incorporated into fibrin whereas the 30-kilodalton heparin binding fragment was excluded. These results indicate that thrombospondin specifically co-polymerizes with fibrin during blood coagulation and may be an important modulator of clot structure.     

Effects of semi-dilute actin solutions on the mobility of fibrin protofibrils during clot formation

Low concentrations of actin filaments (F-actin) inhibit the rate and extent of turbidity developed during polymerization of purified fibrinogen by thrombin. Actin incorporates into the fibrin clot in a concentration-dependent manner that does not reach saturation, indicating nonspecific trapping of actin filaments in the fibrin network. Actin does not retard activation of fibrinogen by thrombin, but rather the alignment of fibrin protofibrils into bundles which constitute the coarse clot. In contrast, equivalent F-actin concentrations have little or no effect on the turbidity of plasma clots. The difference is attributed to the presence of a plasma protein, gelsolin, that severs actin filaments. Purified gelsolin greatly reduces the effect of F-actin on the turbidity of a pure fibrin clot and decreases the fraction of actin incorporated by the clot. A calculation of the extent to which the gelsolin concentrations used in these experiments reduce the fraction of actin filaments which are long enough to impede each other's rotational diffusion indicates that it is the overlapping actin filaments which retard the association of fibrin protofibrils. The findings suggest that one role for the F-actin depolymerizing and particularly actin severing activities in blood is to prevent actin filaments released by tissue injury from interfering with the formation of coarse fibrin clots.     

Gel formation by fibrin oligomers without addition of monomers

Soluble fibrin oligomers were formed by reacting fibrinogen with thrombin under fine clotting conditions where the action of thrombin is the rate-determining step for polymerization, and by inhibiting the reaction shortly before gelation. Oligomeric fibrin was separated from unreacted fibrinogen and small oligomers by gel permeation chromatography. Electron microscopy revealed that the largest soluble fibrin oligomers resemble the protofibrils present in fine clots, but are somewhat shorter and entirely lack the twisted, trifunctional junctions that contribute to the elastic properties of fine clots. When thrombin was added to the soluble fibrin oligomers, polymerization resumed and clots were formed at a more rapid rate than from fibrinogen at the same concentration and resulted in a less-opaque clot under coarse clotting conditions. The results confirm a prediction of a theory for the polymerization of fibrin and provide additional evidence that the final state of a coarse fibrin clot depends on the mobility of protofibrils during its formation.     

Substitution of the human αC region with the analogous chicken domain generates a fibrinogen with severely impaired lateral aggregation: fibrin monomers assemble into protofibrils but protofibrils do not assemble into fibers

Fibrin polymerization occurs in two steps: the assembly of fibrin monomers into protofibrils and the lateral aggregation of protofibrils into fibers. Here we describe a novel fibrinogen that apparently impairs only lateral aggregation. This variant is a hybrid, where the human αC region has been replaced with the homologous chicken region. Several experiments indicate this hybrid human-chicken (HC) fibrinogen has an overall structure similar to normal. Thrombin-catalyzed fibrinopeptide release from HC fibrinogen was normal. Plasmin digests of HC fibrinogen produced fragments that were similar to normal D and E; further, as with normal fibrinogen, the knob 'A' peptide, GPRP, reversed the plasmin cleavage associated with addition of EDTA. Dynamic light scattering and turbidity studies with HC fibrinogen showed polymerization was not normal. Whereas early small increases in hydrodynamic radius and absorbance paralleled the increases seen during the assembly of normal protofibrils, HC fibrinogen showed no dramatic increase in scattering as observed with normal lateral aggregation. To determine whether HC and normal fibrinogen could form a copolymer, we examined mixtures of these. Polymerization of normal fibrinogen was markedly changed by HC fibrinogen, as expected for mixed polymers. When the mixture contained 0.45 μM normal and 0.15 μM HC fibrinogen, the initiation of lateral aggregation was delayed and the final fiber size was reduced relative to normal fibrinogen at 0.45 μM. Considered altogether, our data suggest that HC fibrin monomers can assemble into protofibrils or protofibril-like structures, but these either cannot assemble into fibers or assemble into very thin fibers.     

Protofibrin clots induced by calcium and zinc

During the course of studies with fibrin protofibrils, produced by adding hirudin to thrombin-activated fibrinogen prior to the onset of gelation, turbid clots were observed to be generated merely by adding Ca(II) or Zn(II) to protofibrils. The rate of gelation (CT) and turbidity of the “protofibrin” clots increases with cation levels in a concentration-dependent manner, with Zn(II) much more potent than Ca(II). For example, 50 μM Zn(II) generated a more turbid protofibrin clot than 0.5 mM Ca(II). In combination, levels of Zn(II) and Ca(II), which individually have no effect, induce protofibril gelation. The generation of protofibrin clots by Zn(II) is decreased at increasing ionic strength. Apparently, the underlying electrostatic forces that bind the monomers in fibrin and protofibrin gels are similar. SEM micrographs show that Ca(II)- or Zn(II)-induced protofibrin clots (600–1500Å thick) are essentially indistinguishable from those formed directly from fibrinogen and thrombin with divalent cation. The protofibrin fibers induced by the cations are thicker than the fibers formed directly from fibrinogen and thrombin in the absence of divalent cation. Branching appears brought about the the divalent cation-sensitive lateral association of different protofibril strands. These findings describe simple experimental methods for separately studying the early and late stages of fibrin gelation.     

Pro-thrombotic state induced by post-translational modification of fibrinogen by reactive nitrogen species

Formation of nitric oxide-derived oxidants has been linked to development of atherosclerosis and associated thrombotic complications. Although systemic levels of protein nitrotyrosine predict risk for coronary artery disease, neither specific proteins targeted for modification nor functional consequences that might contribute to disease pathogenesis have been defined. Here we report a selective increase in circulating levels of nitrated fibrinogen in patients with coronary artery disease. Exposure of fibrinogen to nitrating oxidants, including those produced by the myeloperoxidase-hydrogen peroxide-nitrite system, significantly accelerates clot formation and factor XIII cross-linking, whereas exposure of fibrinogen to non-nitrating oxidants decelerates clot formation. Clots formed with fibrinogen exposed to nitrating oxidants are composed of large bundles made from twisted thin fibrin fibers with increased permeation and a decrease in storage modulus G' value, suggesting that these clots could be easily deformed by mechanical stresses. In contrast, clots formed with fibrinogen exposed to non-nitrating oxidants showed decreased permeation with normal architecture. Fibrinogen modified by exposure to physiologic nitration systems demonstrated no difference in the rate of plasmin-induced clot lysis, platelet aggregation, or binding. Thus, increased levels of fibrinogen nitration may lead to a pro-thrombotic state via acceleration in formation of fibrin clots. The present results may account, in part, for the association between nitrative stress and risk for coronary artery disease.     

Altered structure and function of fibrinogen after cleavage by Factor VII Activating Protease (FSAP)

Factor VII Activating Protease (FSAP) is a plasma protease affecting both coagulation and fibrinolysis. Although a role in hemostasis is still unclear, the identification of additional physiologic substrates will help to elucidate its role in this context. FSAP has been reported to cleave fibrinogen, but the functional consequences of this are not known. We have therefore undertaken this study to determine the implications of this cleavage for fibrin-clot formation and its lysis. Treatment of human fibrinogen with FSAP released an N-terminal peptide from the Bβ chain (Bβ1-53) and subsequently the fibrinopeptide B; within the Aα chain a partial truncation of the αC-region by multiple cleavages was seen. The truncated fibrinogen showed a delayed thrombin-catalyzed polymerization and formed fibrin clots of reduced turbidity, indicative of thinner fibrin fibers. Confocal laser scanning and scanning electron microscopy of these clots revealed a less coarse fibrin network with thinner fibers and a smaller pore size. A lower pore size was also seen in permeability studies. Unexpectedly, FSAP-treated fibrinogen or plasma exhibited a significantly faster tPA-driven lysis, which correlated exclusively with cleavage of fibrinogen and not with activation of plasminogen activators. Similar observations were also made in plasma after activation of endogenous zymogen FSAP, but not in plasma of carrier of the rare Marburg I single nucleotide polymorphism. In conclusion, altering fibrin clot properties by fibrinogenolysis is a novel function of FSAP in the vasculature, which facilitates clot lysis and may in vivo contribute to reduced fibrin deposition during thrombosis.     

Influence of glutathione and its derivatives on fibrin polymerization

A complex relationship exists between reduced, oxidized, and nitrosated glutathione (GSH, GSSG, and GSNO, respectively). Although previous studies have demonstrated S-nitrosoglutathione (GSNO) has potent antiplatelet efficacy, little work has examined the role of GSNO and related species on subsequent aspects of coagulation (e.g., fibrin polymerization). Herein, the effects of GSH, GSSG, and GSNO on the entire process of fibrin polymerization are described. Relative to normal fibrinogen, the addition of GSH, GSSG, or GSNO leads to prolonged lag times, slower rates of protofibril lateral aggregation and the formation of clots with lower final turbidities. Dose-dependent studies indicate the influence of GSH on fibrin formation is a function of both GSH and fibrinogen concentration. Studies with Aalpha251 recombinant fibrinogen (lacking alphaC regions) showed GSH had no influence on its polymerization, suggesting the glutathione species interact within the alphaC region of fibrinogen.     

Polydispersion in the diameter of fibers in fibrin networks: Consequences on the measurement of mass–length ratio by permeability and turbidity

The diameters of the fibrin fibers in a clot are not uniform. Morphometric analysis of transmission electron micrographs show a bimodal distribution. The effect of polydispersity of fiber diameter on mass–length ratio calculated from the turbidity and permeability of a clot has been investigated with the aid of a two network model, the networks being called Major and Minor. The fibers in the Major network are many times thicker than those in the Minor network. In a model in which Major network fibers are 10 times thicker than fibers of the Minor network, the fibers in the Minor network make a negligible contribution to the turbidity of the clot. However, they may have a marked effect on its permeability. Experiments with clots made from human fibrinogen show that the Minor network is stabilized by α-polymer and γ-γ linkages and that without such linkages it is washed away during permeation. It remains relatively intact in crosslinked clots. In agreement with the theoretical model, when mass–length ratios calculated from the turbidity are compared with those calculated from the permeability, the latter were reduced in crosslinked clots with an intact Minor network.     

Fibrin assembly. Lateral aggregation and the role of the two pairs of fibrinopeptides.

The structural basis of the wide variability of the physical properties of fibrin clots and the process of assembly of the clot were investigated by electron microscopy of fibers formed under various ionic conditions. In addition, highly specific proteolytic enzymes from different snake venoms were used to remove selectively only the A (batroxobin) or the B (venzyme) fibrinopeptides from fibrinogen, in contrast to thrombin, which removes both pairs. Fibers produced by cleavage of only the B fibrinopeptides displayed a characteristic band pattern indistinguishable from that of fibers formed upon removal of either the A fibrinopeptides alone or of both pairs. Computer modeling studies suggest that there is a unique molecular packing that gives rise to this fibrin band pattern. These findings imply that the release of either fibrinopeptide triggers similar modes of aggregation; the intermolecular binding sites can be localized to particular molecular domains. The diameters of fibers formed with each condition of enzyme, pH, salt concentration, and temperature were measured from electron micrographs. All fibers, except for those produced at both high ionic strength and pH, had about the same average diameter of 85 +/- 13 nm. The degree of lateral aggregation of the fibers themselves varied greatly, however; fibers aggregated more readily with cleavage of both pairs of fibrinopeptides and at lower pH and salt concentrations. The formation of such thick fiber bundles increases the stability of the clot and its resistance to proteolytic dissolution.     

Increased Plasma Clot Permeability and Susceptibility to Lysis Are Associated with Heavy Menstrual Bleeding of Unknown Cause: A Case-Control Study

Background

Formation of compact and poorly lysable clots has been reported in thromboembolic disorders. Little is known about clot properties in bleeding disorders.

Objectives

We hypothesized that more permeable and lysis-sensitive fibrin clots can be detected in women with heavy menstrual bleeding (HMB).

Methods

We studied 52 women with HMB of unknown cause and 52 age-matched control women. Plasma clot permeability (K_s), turbidity and efficiency of fibrinolysis, together with coagulation factors, fibrinolysis proteins, and platelet aggregation were measured.

Results

Women with HMB formed looser plasma fibrin clots (+16% [95%CI 7–18%] Ks) that displayed lower maximum absorbancy (-7% [95%CI -9 – -1%] ΔAbs_max), and shorter clot lysis time (-17% [95%CI -23 – -11%] CLT). The HMB patients and controls did not differ with regard to coagulation factors, fibrinogen, von Willebrand antigen, thrombin generation markers and the proportion of subjects with defective platelet aggregation. The patients had lower platelet count (-12% [95%CI -19 – -2%]), tissue plasminogen activator antigen (-39% [95%CI -41 – -29%] tPA:Ag), and plasminogen activator inhibitor-1 antigen (-28% [95%CI -38 – -18%] PAI-1:Ag) compared with the controls. Multiple regression analysis upon adjustment for age, body mass index, glucose, and fibrinogen showed that decreased tPA:Ag and shortened CLT were the independent predictors of HMB.

Conclusions

Increased clot permeability and susceptibility to fibrinolysis are associated with HMB, suggesting that altered plasma fibrin clot properties might contribute to bleeding disorders of unknown origin.     

Incorporation of vitronectin into fibrin clots. Evidence for a binding interaction between vitronectin and gamma A/gamma' fibrinogen.

Vitronectin is an abundant plasma protein that regulates coagulation, fibrinolysis, complement activation, and cell adhesion. Recently, we demonstrated that plasma vitronectin inhibits fibrinolysis by mediating the interaction of type 1 plasminogen activator inhibitor with fibrin (Podor, T. J., Peterson, C. B., Lawrence, D. A., Stefansson, S., Shaughnessy, S. G., Foulon, D. M., Butcher, M., and Weitz, J. I. (2000) J. Biol. Chem. 275, 19788-19794). The current studies were undertaken to further examine the interactions between vitronectin and fibrin(ogen). Comparison of vitronectin levels in plasma with those in serum indicates that approximately 20% of plasma vitronectin is incorporated into the clot. When the time course of biotinylated-vitronectin incorporation into clots formed from (125)I-fibrinogen is monitored, vitronectin incorporation into the clot parallels that of fibrinogen in the absence or presence of activated factor XIII. Vitronectin binds specifically to fibrin matrices with an estimated K(d) of approximately 0.6 microm. Additional vitronectin subunits are assembled on fibrin-bound vitronectin multimers through self-association. Confocal microscopy of fibrin clots reveals the globular vitronectin aggregates anchored at intervals along the fibrin fibrils. This periodicity raised the possibility that vitronectin interacts with the gamma A/gamma' variant of fibrin(ogen) that represents about 10% of total fibrinogen. In support of this concept, the vitronectin which contaminates fibrinogen preparations co-purifies with the gamma A/gamma' fibrinogen fraction, and clots formed from gamma A/gamma' fibrinogen preferentially bind vitronectin. These studies reveal that vitronectin associates with fibrin during coagulation, and may thereby modulate hemostasis and inflammation.     

Plasminogen activation by tissue plasminogen activator on fibrin clots with different surface structures

Transformation of fibrinogen into fibrin with consequent formation of the fibrin clot trimeric structure is one of the final steps in the blood coagulation system. The plasminogen activation by the tissue plasminogen activator (t-PA) is one of the fibrinolysis system key reactions. The effect of different factors on transformation of plasminogen into plasmin is capable to change essentially the equilibrium between coagulation and fibrinolytic sections of haemostasis system. We have studied the plasminogen activation by tissue plasminogen activator on fibrin clots surface formed on the interface between two phases and in presence of one phase. The t-PA plasminogen activation rate on fibrin clots both with film and without it the latter has been analyzed. These data allow to assume that the changes of fibrin clot structure depend on its formations, as well as are capable to influence essentially on plasminogen activation process by means of its tissue activating agent.     

The Non-catalytic B Subunit of Coagulation Factor XIII Accelerates Fibrin Cross-linking

Covalent cross-linking of fibrin chains is required for stable blood clot formation, which is catalyzed by coagulation factor XIII (FXIII), a proenzyme of plasma transglutaminase consisting of catalytic A (FXIII-A) and non-catalytic B subunits (FXIII-B). Herein, we demonstrate that FXIII-B accelerates fibrin cross-linking. Depletion of FXIII-B from normal plasma supplemented with a physiological level of recombinant FXIII-A resulted in delayed fibrin cross-linking, reduced incorporation of FXIII-A into fibrin clots, and impaired activation peptide cleavage by thrombin; the addition of recombinant FXIII-B restored normal fibrin cross-linking, FXIII-A incorporation into fibrin clots, and activation peptide cleavage by thrombin. Immunoprecipitation with an anti-fibrinogen antibody revealed an interaction between the FXIII heterotetramer and fibrinogen mediated by FXIII-B and not FXIII-A. FXIII-B probably binds the γ-chain of fibrinogen with its D-domain, which is near the fibrin polymerization pockets, and dissociates from fibrin during or after cross-linking between γ-chains. Thus, FXIII-B plays important roles in the formation of a ternary complex between proenzyme FXIII, prosubstrate fibrinogen, and activator thrombin. Accordingly, congenital or acquired FXIII-B deficiency may result in increased bleeding tendency through impaired fibrin stabilization due to decreased FXIII-A activation by thrombin and secondary FXIII-A deficiency arising from enhanced circulatory clearance.     

Computer modeling of fibrin polymerization kinetics correlated with electron microscope and turbidity observations: clot structure and assembly are kinetically controlled.

Although much is known about fibrin polymerization, because it is complex, the effects of various modifications are not intuitively obvious and many experimental observations remain unexplained. A kinetic model presented here that is based on information about mechanisms of assembly accounts for most experimental observations and allows hypotheses about the effects of various factors to be tested. Differential equations describing the kinetics of polymerization were written and then solved numerically. The results have been related to turbidity profiles and electron microscope observations. The concentrations of intermediates in fibrin polymerization, and fiber diameters, fiber and protofibril lengths have been calculated from these models. The simplest model considered has three steps; fibrinopeptide A cleavage, protofibril formation, and lateral aggregation of protofibrils to form fibers. The average number of protofibrils per fiber, which is directly related to turbidity, can be calculated and plotted as a function of time. The lag period observed in turbidity profiles cannot be accurately simulated by such a model, but can be simulated by modifying the model such that oligomers must reach a minimum length before they aggregate. Many observations, reported here and elsewhere, can be accounted for by this model; the basic model may be modified to account for other experimental observations. Modeling predicts effects of changes in the rate of fibrinopeptide cleavage consistent with electron microscope and turbidity observations. Changes only in the rate constants for initiation of fiber growth or for addition of protofibrils to fibers are sufficient to account for a wide variety of other observations, e.g., the effects of ionic strength or fibrinopeptide B removal or thrombospondin. The effects of lateral aggregation of fibers has also been modeled: such behavior has been observed in turbidity curves and electron micrographs of clots formed in the presence of platelet factor 4. Thus, many aspects of clot structure and factors that influence structure are directly related to the rates of these steps of polymerization, even though these effects are often not obvious. Thus, to a large extent, clot structure is kinetically determined.     

Interaction of fibrinogen and its derivatives with fibrin

The binding between complementary polymerization sites of fibrin monomers plays an essential role in the formation of the fibrin clot. One set of polymerization sites involved in the interaction of fibrin monomers is believed to pre-exist in fibrinogen, while the complementary set of binding sites is exposed after the cleavage of fibrinopeptides from fibrinogen. The polymerization sites present in fibrinogen and its derivatives mediate their binding to fibrin. Although the binding of fibrinogen and its derivatives to fibrin have been qualitatively studied, there has been no systematic, quantitative investigation of their interaction with forming or preformed clots. In the present study, the binding of fibrinogen and fragments DD, D1, and E1 was measured using a sonicated suspension of plasminogen- and thrombin-free human cross-linked fibrin as a model of a preformed clot. Dissociation constants of 0.056, 0.19, and 2.44 microM, and the number of binding sites corresponding to 0.10, 0.21, and 0.13/fibrin monomer unit of fibrin polymer were found for fibrinogen, fragment DD, and fragment D1, respectively. Fragment E1 did not bind to sonicated noncross-linked or cross-linked fibrin suspensions. However, it was bound to forming fibrin clots as well as to fibrin-Celite, suggesting that the binding sites on fibrin involved in the interaction with fragment E1 may have been altered upon sonication. Affinity chromatography of various fibrinogen derivatives on a fibrin-Celite column showed that only part of the bound fragment DD was displaced by arginine, whereas fragments D1 and E1 were completely eluted under the same conditions. The results indicate that interaction of fibrinogen with the preformed fibrin clots is characterized by affinity in the nanomolar range and that binding between fibrin monomers, in the process of clot formation, could be characterized by even a higher affinity.     

Recombinant fibrinogen studies reveal that thrombin specificity dictates order of fibrinopeptide release

During cleavage of fibrinogen by thrombin, fibrinopeptide A (FpA) release precedes fibrinopeptide B (FpB) release. To examine the basis for this ordered release, we synthesized A'beta fibrinogen, replacing FpB with a fibrinopeptide A-like peptide, FpA' (G14V). Analyses of fibrinopeptide release from A'beta fibrinogen showed that FpA release and FpA' release were similar; the release of either peptide followed simple first-order kinetics. Specificity constants for FpA and FpA' were similar, demonstrating that these peptides are equally competitive substrates for thrombin. In the presence of Gly-Pro-Arg-Pro, an inhibitor of fibrin polymerization, the rate of FpB release from normal fibrinogen was reduced 3-fold, consistent with previous data; in contrast, the rate of FpA' release from A'beta fibrinogen was unaffected. Thus, with A'beta fibrinogen, fibrinopeptide release from the beta chain is similar to fibrinopeptide release from the alpha chain. We conclude that the ordered release of fibrinopeptides is dictated by the specificity of thrombin for its substrates. We analyzed polymerization, following changes in turbidity, and found that polymerization of A'beta fibrinogen was similar to that of normal fibrinogen. We analyzed clot structure by scanning electron microscopy and found that clots from A'beta fibrinogen were similar to clots from normal fibrinogen. We conclude that premature release of the fibrinopeptide from the N terminus of the beta chain does not affect polymerization of fibrinogen.     

Viscoelasticity of fibrinogen solution and of blood during coagulation studied by a new damped oscillation rheometer

The behavior of a newly developed damped oscillation type rheometer was analyzed for fibrinogen solution and blood during coagulation. This rheometer consists of a cylindrical tube suspended from a torsion wire, that is filled with liquid to be tested. The logarithmic damping factor (LDF) during coagulation for blood and fibrinogen solution was obtained by this rheometer, which was closely related to the changes of viscosity and/or viscoelasticity of the blood sample. The slight increase of LDF prior to the rapid decrease was observed for blood. The increase of LDF would be reflected in the formation of the aggregation structure of red blood cells (rouleaux network) prior to the formation of fibrin network. The value of LDF for fibrinogen solution sharply increased and then decreased through a maximum value with the progress of coagulation, although the change of LDF was remarkably dependent on the fibrinogen concentration. The initial increase in LDF for fibrinogen solution was considered to be due to the formation of small clots in the solution. The decrease in LDF after attaining a maximum value is ascribed to the formation of fully developed fibrin network. The maximum value of LDF during coagulation for fibrinogen solution is higher than that for blood. The behavior was compared with that for non-biological fluids such as viscosity standard liquids and polyvinyl alcohol solution. From those data, it was concluded that the higher value of LDF than that for Newtonian liquids was due to the formation of aggregation structure or inhomogeneous fine clots in the liquid, which was accompanied with the appearance of the elasticity.     

The elastic modulus of fibrin clots and fibrinogen gels: the effect of fibronectin and dithiothreitol

The elastic modulus (G') of factor XIIIa induced fibrinogen gels was found to be substantially lower than the G' of fibrin gels that were formed by clotting fibrinogen with thrombin. The addition of fibronectin and/or the reducing reagent dithiothreitol (DTT) to the factor XIIIa coagulation mixture led to the formation of a weaker gel structure, while the rigidity of thrombin induced clots was not appreciably affected by the inclusion of the DTT but increased somewhat in the presence of fibronectin. The reasons for the differing clot rigidities are discussed in terms of biochemical mechanisms.