Mutation of interfacial residues disrupts subunit folding and particle assembly of Physalis mottle tymovirus

Virus-like particles (VLPs) serve as excellent model systems to identify the pathways of virus assembly. To gain insights into the assembly mechanisms of the Physalis mottle tymovirus (PhMV), six interfacial residues, identified based on the crystal structure of the native and recombinant capsids, were targeted for mutagenesis. The Q37E, Y67A, R68Q, D83A, I123A, and S145A mutants of the PhMV recombinant coat protein (rCP) expressed in Escherichia coli were soluble. However, except for the S145A mutant, which assembled into VLPs similar to that of wild type rCP capsids, all the other mutants failed to assemble into VLPs. Furthermore, the purified Q37E, Y67A, R68Q, D83A, and I123A rCP mutants existed essentially as partially folded monomers as revealed by sucrose density gradient analysis, circular dichroism, fluorescence, thermal, and urea denaturation studies. The rCP mutants locked into such conformations probably lack the structural signals/features that would allow them to assemble into capsids. Thus, the mutation of residues involved in inter-subunit interactions in PhMV disrupts both subunit folding and particle assembly.     

Three-dimensional structure of physalis mottle virus: implications for the viral assembly.

The structure of the T=3 single stranded RNA tymovirus, physalis mottle virus (PhMV), has been determined to 3.8 A resolution. PhMV crystals belong to the rhombohedral space group R 3, with one icosahedral particle in the unit cell leading to 20-fold non-crystallographic redundancy. Polyalanine coordinates of the related turnip yellow mosaic virus (TYMV) with which PhMV coat protein shares 32 % amino acid sequence identity were used for obtaining the initial phases. Extensive phase refinement by real space molecular replacement density averaging resulted in an electron density map that revealed density for most of the side-chains and for the 17 residues ordered in PhMV, but not seen in TYMV, at the N terminus of the A subunits. The core secondary and tertiary structures of the subunits have a topology consistent with the capsid proteins of other T=3 plant viruses. The N-terminal arms of the A subunits, which constitute 12 pentamers at the icosahedral 5-fold axes, have a conformation very different from the conformations observed in B and C subunits that constitute hexameric capsomers with near 6-fold symmetry at the icosahedral 3-fold axes. An analysis of the interfacial contacts between protein subunits indicates that the hexamers are held more strongly than pentamers and hexamer-hexamer contacts are more extensive than pentamer-hexamer contacts. These observations suggest a plausible mechanism for the formation of empty capsids, which might be initiated by a change in the conformation of the N-terminal arm of the A subunits. The structure also provides insights into immunological and mutagenesis results. Comparison of PhMV with the sobemovirus, sesbania mosaic virus reveals striking similarities in the overall tertiary fold of the coat protein although the capsid morphologies of these two viruses are very different.     

Three-dimensional structure of vaccinia virus-produced human papillomavirus type 1 capsids.

The capsid proteins of papillomavirus self-assemble to form empty capsids or virus-like particles that appear quite similar to naturally occurring virions by conventional electron microscopy. To characterize such virus-like particles more fully, cryoelectron microscopy and image analysis techniques were used to generate three-dimensional reconstructions of capsids produced by vaccinia virus recombinants (V capsids) that expressed human papillomavirus type 1 L1 protein only or both L1 and L2 proteins. All V capsids had 72 pentameric capsomers arranged on a T = 7 icosahedral lattice. Each particle (approximately 60 nm in diameter) consisted of an approximately 2-nm-thick shell of protein with a radius of 22 nm with capsomers that extend approximately 6 nm from the shell. At a resolution of 3.5 nm, both V capsid structures appear identical to the capsid structure of native human papillomavirus type 1 (T. S. Baker, W. W. Newcomb, N. H. Olson, L. M. Cowsert, C. Olson, and J. C. Brown, Biophys. J. 60:1445-1456, 1991), thus implying that expressed and native capsids are structurally equivalent.     

Protein-RNA interactions and virus stability as probed by the dynamics of tryptophan side chains

The correlation between dynamics and stability of icosahedral viruses was studied by steady-state and time-resolved fluorescence approaches. We compared the environment and dynamics of tryptophan side chains of empty capsids and ribonucleoprotein particles of two icosahedral viruses from the comovirus group: cowpea mosaic virus (CPMV) and bean pod mottle virus (BPMV). We found a great difference between tryptophan fluorescence emission spectra of the ribonucleoprotein particles and the empty capsids of BPMV. For CPMV, time-resolved fluorescence revealed differences in the tryptophan environments of the capsid protein. The excited-state lifetimes of tryptophan residues were significantly modified by the presence of RNA in the capsid. More than half of the emission of the tryptophans in the ribonucleoprotein particles of CPMV originates from a single exponential decay that can be explained by a similar, nonpolar environment in the local structure of most of the tryptophans, even though they are physically located in different regions of the x-ray structure. CPMV particles without RNA lost this discrete component of emission. Anisotropy decay measurements demonstrated that tryptophans rotate faster in empty particles when compared with the ribonucleoprotein particles. The increased structural breathing facilitates the denaturation of the empty particles. Our studies bring new insights into the intricate interactions between protein and RNA where part of the missing structural information on the nucleic acid molecule is compensated for by the dynamics.     

RNA-protein interactions and secondary structures of cowpea chlorotic mottle virus for in vitro assembly

Laser Raman spectroscopy of the cowpea chlorotic mottle virus (CCMV) in native (pH 5.0) and partially swollen (pH 7.5) states reveals the presence of small percentages of protonated adenine (less than 15%) and cytosine (less than 7%) bases in the encapsidated RNA molecule of the native virion. The protonated bases are titrated with pH-induced swelling of the virus. Titration of putative COOH groups of aspartic and glutamic side chains of the virion subunit cannot be detected over the same pH range, which suggests that carboxyl anions (CO-2) and protonated bases are both available at pH 5 to stabilize the ribonucleoprotein particles by electrostatic interactions. The highly (95%) ordered secondary structure of encapsidated RNA may undergo a small additional increase (less than 3%) in ordered structure with release from the virion, suggesting at most a marginal structure-distorting influence from protein contacts in the native particle. The Raman spectra of the virion are also compared by difference spectroscopy with spectra of capsids (empty shells devoid of RNA), subunit dimers, and protein-free RNA. The results indicate that the subunit structure is altered by the release of RNA from the virion, as well as by the swelling of the virion. Amino acid residues and protein secondary structures that are affected in these in vitro assembly and disassembly processes are identified from their characteristic Raman lines. Two classes of cysteinyl SH groups, solvent exposed and solvent protected, are revealed for the capsid and virion subunit.(ABSTRACT TRUNCATED AT 250 WORDS)     

Capsid intermediates assembled in a foot-and-mouth disease virus genome RNA-programmed cell-free translation system and in infected cells.

Structural protein complexes sedimenting at 140S, 70S (empty capsids), and 14S were isolated from foot-and-mouth disease virus-infected cells. The empty capsids were stable, while 14S complexes were relatively short-lived. Radioimmune binding assays involving the use of neutralizing monoclonal antibodies to six distinct epitopes on type A12 virus and polyclonal antisera to A12 structural proteins demonstrated that native empty capsids were indistinguishable from virus. Infected cell 14S particles possessed all the neutralizing epitopes and reacted with VP2 antiserum. Cell-free structural protein complexes sedimenting at 110S, 60S, and 14S containing capsid proteins VP0, VP3, and VP1 are assembled in a rabbit reticulocyte lysate programmed with foot-and-mouth viral RNA. These structures also contain the six epitopes, and cell-free 14S structures like their in vivo counterparts reacted with VP2 antiserum. Capsid structures from infected cells and the cell-free complexes adsorbed to susceptible cells, and this binding was inhibited, to various degrees, by saturating levels of unlabeled virus. These assays and other biochemical evidence indicate that capsid assembly in the cell-free system resembles viral morphogenesis in infected cells. In addition, epitopes on the virus surface possibly involved in interaction with cellular receptor sites are found early in virion morphogenesis.     

Structural determinants of tissue tropism and in vivo pathogenicity for the parvovirus minute virus of mice

Two strains of the parvovirus minute virus of mice (MVM), the immunosuppressive (MVMi) and the prototype (MVMp) strains, display disparate in vitro tropism and in vivo pathogenicity. We report the crystal structures of MVMp virus-like particles (MVMp(b)) and native wild-type (wt) empty capsids (MVMp(e)), determined and refined to 3.25 and 3.75 A resolution, respectively, and their comparison to the structure of MVMi, also refined to 3.5 A resolution in this study. A comparison of the MVMp(b) and MVMp(e) capsids showed their structures to be the same, providing structural verification that some heterologously expressed parvovirus capsids are indistinguishable from wt capsids produced in host cells. The structures of MVMi and MVMp capsids were almost identical, but local surface conformational differences clustered from symmetry-related capsid proteins at three specific domains: (i) the icosahedral fivefold axis, (ii) the "shoulder" of the protrusion at the icosahedral threefold axis, and (iii) the area surrounding the depression at the icosahedral twofold axis. The latter two domains contain important determinants of MVM in vitro tropism (residues 317 and 321) and forward mutation residues (residues 399, 460, 553, and 558) conferring fibrotropism on MVMi. Furthermore, these structural differences between the MVM strains colocalize with tropism and pathogenicity determinants mapped for other autonomous parvovirus capsids, highlighting the importance of common parvovirus capsid regions in the control of virus-host interactions.     

Electron cryo-microscopy and image reconstruction of adeno-associated virus type 2 empty capsids

Adeno-associated virus type 2 empty capsids are composed of three proteins, VP1, VP2 and VP3, which have relative molecular masses of 87, 72 and 62 kDa, respectively, and differ in their N-terminal amino acid sequences. They have a likely molar ratio of 1:1:8 and occupy symmetrical equivalent positions in an icosahedrally arranged protein shell. We have investigated empty capsids of adeno-associated virus type 2 by electron cryo-microscopy and icosahedral image reconstruction. The three-dimensional map at 1.05 nm resolution showed sets of three elongated spikes surrounding the three-fold symmetry axes and narrow empty channels at the five-fold axes. The inside of the capsid superimposed with the previously determined structure of the canine parvovirus (Q. Xie and M.S. Chapman, 1996, J. Mol. Biol., 264, 497–520), whereas the outer surface showed clear discrepancies. Globular structures at the inner surface of the capsid at the two-fold symmetry axes were identified as possible positions for the N-terminal extensions of VP1 and VP2.     

Poliovirus empty capsid morphogenesis: evidence for conformational differences between self- and extract-assembled empty capsids.

In this paper we describe the use of specific proteinases, surface-specific radioiodination, and antigenic reactivity in conjunction with isoelectric focusing for probing the conformations of different polioviral empty capsid species. Naturally occurring empty capsids (called procapsids) with an isoelectric point of 6.8 were resistant to proteolytic digestion by trypsin or chymotrypsin, as were empty capsids assembled in vitro in the presence of a cytoplasmic extract prepared from poliovirus-infected HeLa cells. In contrast, self-assembled empty capsids (isoelectric point, 5.0) were sensitive to both proteinases. Capsid proteins VP0 and VP1 were attacked predominantly, whereas VP3 was resistant to cleavage. Unpolymerized 14S particles possessed a trypsin sensitivity which was qualitatively similar to that of self-assembled empty shells. Surface-specific iodination of virions and procapsids labeled VP1 exclusively. In contrast, radioiodination of self-assembled empty capsids labeled predominantly VP0. After radioiodination the sedimentation coefficient corrected to water at 20 degrees C, the isoelectric point, and the trypsin resistance of the procapsids remained unchanged. Procapsids and extract-assembled empty capsids were N antigenic, whereas self-assembled empty capsids were H antigenic. Self-assembled empty capsids were not converted to pH 6.8 trypsin-resistant structures by incubation with a virus-infected cytoplasmic extract. However, 14S particles assembled in the presence of a mock-infected extract formed empty capsids, 20% of which resembled extract-assembled empty shells as determined by the above-described criteria. These and related findings are discussed in terms of empty capsid structure and morphogenesis.     

Structure of the Fab-labeled "breathing" state of native poliovirus

At 37°C, the structure of poliovirus is dynamic, and internal polypeptides VP4 and N terminus of VP1 (residues 1 to 53) externalize reversibly. An Fab fragment of a monospecific antibody, which binds to residues 39 to 55 of VP1, was utilized to locate the N termini of VP1 in native (160S) particles in this "breathing" state. Fab and virus were mixed and imaged via cryogenic electron microscopy. The resulting reconstruction showed the capsid expands similarly to the irreversibly altered cell entry intermediate (135S) particle, but the N terminus of VP1 is located near the 2-fold axes, instead of the "propeller tip" as in 135S particles.     

Enhanced local symmetry interactions globally stabilize a mutant virus capsid that maintains infectivity and capsid dynamics

Structural transitions in viral capsids play a critical role in the virus life cycle, including assembly, disassembly, and release of the packaged nucleic acid. Cowpea chlorotic mottle virus (CCMV) undergoes a well-studied reversible structural expansion in vitro in which the capsid expands by 10%. The swollen form of the particle can be completely disassembled by increasing the salt concentration to 1 M. Remarkably, a single-residue mutant of the CCMV N-terminal arm, K42R, is not susceptible to dissociation in high salt (salt-stable CCMV [SS-CCMV]) and retains 70% of wild-type infectivity. We present the combined structural and biophysical basis for the chemical stability and viability of the SS-CCMV particles. A 2.7-A resolution crystal structure of the SS-CCMV capsid shows an addition of 660 new intersubunit interactions per particle at the center of the 20 hexameric capsomeres, which are a direct result of the K42R mutation. Protease-based mapping experiments of intact particles demonstrate that both the swollen and closed forms of the wild-type and SS-CCMV particles have highly dynamic N-terminal regions, yet the SS-CCMV particles are more resistant to degradation. Thus, the increase in SS-CCMV particle stability is a result of concentrated tethering of subunits at a local symmetry interface (i.e., quasi-sixfold axes) that does not interfere with the function of other key symmetry interfaces (i.e., fivefold, twofold, quasi-threefold axes). The result is a particle that is still dynamic but insensitive to high salt due to a new series of bonds that are resistant to high ionic strength and preserve the overall particle structure.     

An externalized polypeptide partitions between two distinct sites on genome-released poliovirus particles

During cell entry, native poliovirus (160S) converts to a cell-entry intermediate (135S) particle, resulting in the externalization of capsid proteins VP4 and the amino terminus of VP1 (residues 1 to 53). Externalization of these entities is followed by release of the RNA genome (uncoating), leaving an empty (80S) particle. The antigen-binding fragment (Fab) of a monospecific peptide 1 (P1) antibody, which was raised against a peptide corresponding to amino-terminal residues 24 to 40 of VP1, was utilized to track the location of the amino terminus of VP1 in the 135S and 80S states of poliovirus particles via cryogenic electron microscopy (cryo-EM) and three-dimensional image reconstruction. On 135S, P1 Fabs bind to a prominent feature on the external surface known as the “propeller tip.” In contrast, our initial 80S-P1 reconstruction showed P1 Fabs also binding to a second site, at least 50 Å distant, at the icosahedral 2-fold axes. Further analysis showed that the overall population of 80S-P1 particles consisted of three kinds of capsids: those with P1 Fabs bound only at the propeller tips, P1 Fabs bound only at the 2-fold axes, or P1 Fabs simultaneously bound at both positions. Our results indicate that, in 80S particles, a significant fraction of VP1 can deviate from icosahedral symmetry. Hence, this portion of VP1 does not change conformation synchronously when switching from the 135S state. These conclusions are compatible with previous observations of multiple conformations of the 80S state and suggest that movement of the amino terminus of VP1 has a role in uncoating. Similar deviations from icosahedral symmetry may be biologically significant during other viral transitions.     

Head maturation pathway of bacteriophages T4 and T2. IV. In vitro transformation of T4 head-related particles produced by mutants in gene 17 to capsid-like structures

T4 mutants in gene 17 accumulate particles which contain the main head protein in the cleaved form (gp23*) arranged in an unexpanded lattice (empty small particles), together with other expanded capsids (empty large particles). The isolated empty small particles can be transformed in vitro, by lowering the ionic strength, to capsid-like structures. This structural transformaton is not coupled to chemical modification of the structural proteins of the empty small particles. In contrast to unexpanded particles that are easily dissociated, the transformed structures are as resistant to dissociation as other T-even head-related particles with expanded lattice. Furthermore, the transformed particles are able to bind in vitro hoc and soc proteins, rendering capsids indistinguishable from the normal T4 capsids both morphologically and by their stability against denaturing agents. Our results indicate that the in vitro transformation of the empty small particles might mimic important and characteristic aspects of the in vivo maturation of T4 heads, thus suggesting a possible role of the "cleaved but unexpanded" particle in the maturation pathway of the T4 shell.     

A conformational change in the adeno-associated virus type 2 capsid leads to the exposure of hidden VP1 N termini

The complex infection process of parvoviruses is not well understood so far. An important role has been attributed to a phospholipase A2 domain which is located within the unique N terminus of the capsid protein VP1. Based on the structural difference between adeno-associated virus type 2 wild-type capsids and capsids lacking VP1 or VP2, we show via electron cryomicroscopy that the N termini of VP1 and VP2 are involved in forming globules inside the capsids of empty and full particles. Upon limited heat shock, VP1 and possibly VP2 become exposed on the outsides of full but not empty capsids, which is correlated with the disappearance of the globules in the inner surfaces of the capsids. Using molecular modeling, we discuss the constraints on the release of the globularly organized VP1-unique N termini through the channels at the fivefold symmetry axes outside of the capsid.     

The three-dimensional structure of reovirus obtained by cryo-electron microscopy.

The structures of reovirus serotypes T2J (Jones), T3D (Dearing) and the T3D core particle have been determined by cryo-electron microscopy and image processing. At a resolution of 30 A the two serotypes have similar features. The core is visible within the virus structure. The outer surface of the virus particles contains 120 holes at T = 13.1 local 6-fold axes. The holes penetrate into the virus as far as the surface of the internal core shell. Protrusions extending 4 nm from the virus surface surround each hole on the outside of the virus. At the 5-fold axes on the surface of the virus flat 'penton craters' form covers over the underlying core spikes. The detailed structure of the reovirus shell is very different to that of rotavirus although both have holes at T = 13.1 axes. Little evidence was seen of reovirus fibres extending from the virus surface.     

Role and mechanism of the maturation cleavage of VP0 in poliovirus assembly: structure of the empty capsid assembly intermediate at 2.9 A resolution.

The crystal structure of the P1/Mahoney poliovirus empty capsid has been determined at 2.9 A resolution. The empty capsids differ from mature virions in that they lack the viral RNA and have yet to undergo a stabilizing maturation cleavage of VP0 to yield the mature capsid proteins VP4 and VP2. The outer surface and the bulk of the protein shell are very similar to those of the mature virion. The major differences between the 2 structures are focused in a network formed by the N-terminal extensions of the capsid proteins on the inner surface of the shell. In the empty capsids, the entire N-terminal extension of VP1, as well as portions corresponding to VP4 and the N-terminal extension of VP2, are disordered, and many stabilizing interactions that are present in the mature virion are missing. In the empty capsid, the VP0 scissile bond is located some 20 A away from the positions in the mature virion of the termini generated by VP0 cleavage. The scissile bond is located on the rim of a trefoil-shaped depression in the inner surface of the shell that is highly reminiscent of an RNA binding site in bean pod mottle virus. The structure suggests plausible (and ultimately testable) models for the initiation of encapsidation, for the RNA-dependent autocatalytic cleavage of VP0, and for the role of the cleavage in establishing the ordered N-terminal network and in generating stable virions.     

Conformational changes in adeno-associated virus type 1 induced by genome packaging

Adeno-associated virus (AAV) is frequently used as a vector for gene therapy. The viral capsid consists of three structural proteins (VP1, VP2, and VP3) that have a common C-terminal core (VP3), with N-terminal extensions of increasing length in VP2 and VP1. The capsid encloses a single-stranded genome of up to 4.7 kb, which is packaged into empty capsids. The N-terminal extension of VP1 carries a phospholipase domain that becomes accessible during infection in the endosomal pathway. We have used cryo-electron microscopy and image reconstruction to determine subnanometer-resolution structures of recombinant AAV1 that has packaged different amounts of a 3. 6-kb recombinant genome. The maps show that the AAV1 capsid undergoes continuous conformational changes upon packaging of the genome. The rearrangements occur at the inner capsid surface and lead to constrictions of the pores at the 5-fold symmetry axes and to subtle movements of the β-sheet regions of the capsid proteins. In fully packaged particles, the genome forms stem-like features that contact the inner capsid surface at the 3-fold symmetry axes. We think that the reorganization of the inner surface has an impact on the viral life cycle during infection, preparing the externalization of phospholipase domains through the pores at the 5-fold symmetry axes and possibly genome release.     

In vitro expression of belladonna mottle virus genome.

In vitro translation of belladonna mottle virus BDMV(I) genomic RNA in a rabbit reticulocyte lysate system produced proteins of Mr 210,000, 150,000 and 78,000 which form the non-structural proteins. The coat protein, on the other hand, was expressed from a subgenomic RNA which was found to be encapsidated in the empty capsids forming the top component viral particles. The implications of subgenomic RNA encapsidation in viral replication and assembly are discussed.     

Pseudo-atomic models of swollen CCMV from cryo-electron microscopy data

The capsid of cowpea chlorotic mottle virus (CCMV) can reversibly switch between two forms that are contingent on the charge of acidic residues that are clustered at the quasi-threefold axes of the T=3 icosahedral particle. The quaternary structure conformations are dependent on divalent metal ions and pH and were previously analyzed by crystallography in the native, compact form, and by cryo-electron microscopy in the compact and swollen forms (Speir et al., 1995). In this report we use the atomic models of the three structurally unique viral subunits determined by crystallography for a detailed interpretation of the 28-A-resolution electron density of the swollen form and the production of a pseudo-atomic model of this particle. The model of the quaternary structure conforms with high fidelity to conventional geometric constraints, quasi-equivalence, intersubunit association energies, and the electron density. It was derived by conserving the pentamers and hexamers of subunits whose associated electron densities are strikingly similar in the two forms of the particles. Treating these as rigid units in the modeling implies that the particle flexibility is accommodated primarily by changes in dimer interactions, an observation that is consistent with the flexible C-terminal polypeptide extensions that stabilize this contact in the crystal structure. Because the hexamers and pentamers were incrementally translated and rotated in a screw motion, with energy minimization at each of 28 steps, a path for the expansion is also implied.     

Crystallographic structure of the T=1 particle of brome mosaic virus

T=1 icosahedral particles of amino terminally truncated brome mosaic virus (BMV) protein were created by treatment of the wild-type T=3 virus with 1M CaCl2 and crystallized from sodium malonate. Diffraction data were collected from frozen crystals to beyond 2.9 A resolution and the structure determined by molecular replacement and phase extension. The particles are composed of pentameric capsomeres from the wild-type virions which have reoriented with respect to the original particle pentameric axes by rotations of 37 degrees , and formed tenuous interactions with one another, principally through conformationally altered C-terminal polypeptides. Otherwise, the pentamers are virtually superimposable upon those of the original T=3 BMV particles. The T=1 particles, in the crystals, are not perfect icosahedra, but deviate slightly from exact symmetry, possibly due to packing interactions. This suggests that the T=1 particles are deformable, which is consistent with the loose arrangement of pentamers and latticework of holes that penetrate the surface. Atomic force microscopy showed that the T=3 to T=1 transition could occur by shedding of hexameric capsomeres and restructuring of remaining pentamers accompanied by direct condensation. Knowledge of the structures of the BMV wild-type and T=1 particles now permit us to propose a tentative model for that process. A comparison of the BMV T=1 particles was made with the reassembled T=1 particles produced from the coat protein of trypsin treated alfalfa mosaic virus (AlMV), another bromovirus. There is little resemblance between the two particles. The BMV particle, with a maximum diameter of 195 A, is made from distinctive pentameric capsomeres with large holes along the 3-fold axis, while the AlMV particle, of approximate maximum diameter 220 A, has subunits closely packed around the 3-fold axis, large holes along the 5-fold axis, and few contacts within pentamers. In both particles crucial linkages are made about icosahedral dyads.