Formation of a cross-linking complex of dinitrogenase reductase-activating glycohydrolase (DRAG) with membrane proteins from <Emphasis Type="Italic">Rhodospirillum rubrum</Emphasis> chromatophores

Association of dinitrogenase reductase-activating glycohydrolase (DRAG) with membrane proteins of chromatophores has been investigated. The formation of a multicomponent complex between DRAG and membrane proteins was demonstrated in the presence of glutaraldehyde and EDC/NHS (N-(3-dimethylaminopropyl)-N -ethylcarbodiimide hydrochloride/hydroxy-2,5-dioxopyrrolidine-3-sulfonic acid sodium salt). Complex formation was observed both in native chromatophore membrane and in chromatophores treated with 0.5 M NaCl in the presence of homogeneous DRAG and glutaraldehyde in cross-reaction. The molecular weight of the complex was around 200 kD, which is consistent with the association of DRAG with three or more chromatophore membrane proteins. A specific complex with molecular weight of about 75 kD was formed only in the presence of EDC/NHS in the cross-linking reaction. It was demonstrated that ammonium transport protein and P11 protein are possible candidates for association with DRAG in chromatophore membranes.     

Development of an amperometric immunosensor for detection of staphylococcal enterotoxin type A in cheese

This paper reports a novel electrochemical immunosensor for the sensitive detection of staphylococcal enterotoxin A (SEA) based on self-assembly monolayer (SAM) and protein A immobilization on gold electrode. Three different methods of protein A immobilization were tested: physical adsorption, cross-linking using glutaraldehyde and covalent binding after activation with N-hydroxysuccinimide (NHS)/N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) on cysteamine-modified gold electrode. The EDC/NHS method for protein A immobilization was selected to lead development of the biosensor. The coating steps of the surface modification were characterized by cyclic voltammetry and the biosensor response by chronoamperometry. The advantages of the immunosensor were exposed in its high sensitivity and specificity. The proposed amperometric immunosensor was successfully used for determination of SEA in contaminated and non-contaminated cheese samples with excellent responses.     

Long-term nano-mechanical properties of biomodified dentin-resin interface components

Failures of dental composite restorative procedures are largely attributed to the degradation of dentin-resin interface components. Biomodification of dentin using bioactive agents may improve the quality and durability of the dentin-resin bonds. The aim of this study was to nanomechanically assess the reduced modulus of elasticity (Er) and nano-hardness (H) of major components of the dentin-resin interface (hybrid layer, adhesive layer and underlying dentin) biomodified by collagen cross-linkers at 24h, 3 and 6 months following restorative procedure. Demineralized dentin surfaces were biomodified with 5% glutaraldehyde (GD) or 6.5% grape seed extract (GSE) prior to placement of adhesive systems and composite resin. Nano-measurements of the interface components in a fluid cell showed that both agents increased the Er and H of underlying dentin after 3 and 6 months when compared to a control. The mechanical properties of the adhesive and hybrid layers decreased over time. Biomodification of the dentin-resin interface structures using GD and GSE can increase the mechanical properties of the interface over time and may contribute to the long-term quality of adhesive restorations.     

A novel chitosan derivative to immobilize alpha-L-rhamnopyranosidase from Aspergillus niger for application in beverage technologies

alpha-L-rhamnopyranosidase (Rha, EC 3.2.1.40) is an enzyme of considerable importance to food technology in increasing the aroma of wines, musts, fruit juices and other beverages. The aim of this research is the immobilization of the Rha contained in a commercial preparation already used in the winemaking industry and purified in the manner described in a previous study [1]. The immobilization supports tested were chitin, chitosan and derivatized chitosan, diethylaminoethyl chitosan (DE-chitosan) never previously used for this type of application. Particularly, on DE-chitosan, the Rha was adsorbed and cross-linked with various bifunctional agents (glutaraldehyde, diepoxyoctane, suberimidate and carbodiimide), whose best results (immobilization yields and activity) were obtained with carbodiimide (EDC) that allowed a reduction in the involvement of the enzyme amine groups that are probably important in catalytic mechanism. In addition, the use of rhamnose and a succinimide (NHS) during cross-linking enhanced the action of the EDC and so increased the immobilization yield and activity. The immobilized Rha retained the kinetic parameters (K(m) and V(max)) of the free enzyme and increased stability. Moreover, this biocatalyst allowed an increase in the aroma in a model wine solution containing glicosidic precursors with a marked reduction in specificity toward tertiary monoterpenols as compared to the free enzyme.     

Cartilage type IX collagen is cross-linked by hydroxypyridinium residues

Type IX collagen, a recently discovered, unusual protein of cartilage, has a segmented triple-helical structure containing interchain disulfides. Its polymeric form and function are unknown. When prepared by pepsin from bovine articular cartilage, type IX collagen was found to contain a high concentration of hydroxypyridinium cross-links, similar to that in type II collagen. Fluorescence spectroscopy located the hydroxylysyl pyridinoline and lysyl pyridinoline cross-linking residues exclusively in the high-molecular-weight collagen fraction, from which they were recovered predominantly in a single CNBr-derived peptide. The results point to a structural role for type IX collagen in cartilage matrix, possibly as an adhesion material to type II collagen fibrils.     

Glutaraldehyde treatment of proteinaceous gas vesicles from cyanobacterium Anabaena flos-aquae

As potential gas microcarriers, gas vesicles (GVs) were isolated from cultures of the filamentous cyanobacterium Anabaena flos-aquae and treated with glutaraldehyde. The effects of glutaraldehyde treatment on the stability of GVs, against elevated temperatures (40-121 degrees C) and protein-stripping agents such as urea and sodium dodecyl sulfate (SDS), were then examined with the pressure collapse curves generated using pressure nephelometry. The treatment was very beneficial to GVs against the exposure to SDS and urea; however, it did not make the evolution-optimized vesicle structure stronger or more temperature-resistant. In the presence of these protein-stripping agents, the treated vesicles had higher median (50%) collapse pressures (by > or =1 atm) than the untreated ones, at both room temperature and 40 degrees C. This increase has been presumably attributed to the cross-linking of the large GvpC protein to the ribbed GvpA shell, thereby resisting the stripping of GvpC that provides the primary mechanical strength to the vesicle wall. The glutaraldehyde treatment also restored the strength of GVs weakened by a 5-week storage in a refrigerator and, therefore, is expected to improve the stability of GVs for long-term storage. GVs could not be autoclaved. If necessary for the intended applications, glutaraldehyde treatment may also serve to chemically sterilize the vesicles, with the glutaraldehyde subsequently removed by dialysis.     

Contact-site cross-linking agents

Summary Contact-site cross-linking agents comprise a heterogeneous grouping of cross-linkers which share the common property of being able to cross-link only very closely juxtaposed residues in macromolecular complexes. We have defined contact-site cross-linking arbitrarily as the covalent joining of residues such that they are constrained to a distance which is equivalent to or less than their closest possible steric approach prior to becoming linked (1). We recognize two classes of contact-site cross-linkers, bridge type and zero-length type. The former, such as formaldehyde, become incorporated during cross-linking as one-atom bridges. The latter, such as the carbodiimides, operate as condensing agents with the result that the cross-linked residues become interjoined directly. Contact-site cross-linkers have been used in several ways as specific probes of both the static and dynamic aspects of macromolecular structure. They can yield precise structural information about macromolecular contacts when actual sites of cross-linking are determined by peptide or nucleotide mapping techniques. In this way exact contacs between histones in the nucleosome, between protein and RNA in the ribosome, and between RNA polymerase and DNA have been determined. Contact-site cross-linkers have also been used to probe the perturbation of contacts following macromolecular conformational changes. Certain histonehistone ‘cross-linkable’ sites are rendered unreactive after induction of chromatin conformational changes thus serving to localize sites of perturbation.     

Simplified methods for isolation of ubiquitin from erythrocytes. Generation of ubiquitin polymers

1. Ubiquitin has been isolated from bovine erythrocytes by procedures in which the hemoglobin was removed by denaturation with either ethanol-chloroform mixtures or by heating. 2. The proteins soluble to the denaturation step were removed by 3% sodium trichloroacetate (TCA) at pH 2.0-2.5 or by 5% TCA. 3. Ubiquitin was isolated in relatively high yield from the TCA insoluble fraction by use of single ion-exchange chromatographic and gel permeation steps. 4. Ubiquitin shows relatively little cross-linking upon treatment with glutaraldehyde or with dimethyl suberimidate. Heating of the glutaraldehyde treated material in 4 M guanidine, however, leads to marked aggregation. 5. The polymers of ubiquitin react strongly with antibody in an immunoblot assay.     

Pepsin immobilized on inorganic supports for the continuous coagulation of skim milk.

The milk-clotting enzyme pepsin was immobilized onto beads of alumina, titania, glass, stainless steel, iron oxide, and Teflon for treating skim milk in a fluidized-bed reactor. Two covalent attachment procedures using silanized supports and glutaraldehyde and two adsorption procedures were evaluated. The three best catalysts were titania and glass, using the covalent attachment procedure, and alumina, using the adsorption procedure at pH 1.2. The pepsin adsorbed on alumina catalyst has commercial potential compared to the previously used glass catalyst. Attempts to increase the stability of pepsin adsorbed on alumina by cross-linking with glutaraldehyde were unsuccessful owing to the low pH necessary for optimum pepsin adsorption; Desorption of pepsin from alumina during reactor operation was determined. Regeneration of spent catalysts was only partially successful.     

The value of hyaluronidase treatment of different tissues before demonstration of fibronectin by the indirect immunoperoxidase technique

The influence of testicular hyaluronidase treatment on the immunohistochemical localization of fibronectin in different tissues (human articular cartilage, large intestine, synovial membrane and experimental granulation tissue) as well on frozen as on formaldehyde fixed, paraffin embedded tissue, has been studied using the indirect immunoperoxidase technique. Pretreatment with hyaluronidase is essential in demonstrating fibronectin in frozen sections of human articular cartilage. In the other tissues examined treatment with hyaluronidase was not essential, but gave a more optimal staining quality. The effect of hyaluronidase treatment was to some extent dependent on the duration of treatment. In formaldehyde fixed, paraffin processed tissue the improvement with hyaluronidase treatment was only seen when the hyaluronidase followed pepsin digestion of the deparaffinized tissue sections.     

The value of hyaluronidase treatment of different tissues before demonstration of fibronectin by the indirect immunoperoxidase technique

Summary The influence of testicular hyaluronidase treatment on the immunohistochemical localization of fibronectin in different tissues (human articular cartilage, large intestine, synovial membrane and experimental granulation tissue) as well on frozen as on formaldehyde fixed, paraffin embedded tissue, has been studied using the indirect immunoperoxidase technique. Pretreatment with hyaluronidase is essential in demonstrating fibronectin in frozen sections of human articular cartilage. In the other tissues examined treatment with hyaluronidase was not essential, but gave a more optimal staining quality. The effect of hyaluronidase treatment was to some extent dependent on the duration of treatment. In formaldehyde fixed, paraffin processed tissue the improvement with hyaluronidase treatment was only seen when the hyaluronidase followed pepsin digestion of the deparaffinized tissue sections.     

Organization of photosystem I polypeptides examined by chemical cross-linking.

Photosystem I from the cyanobacterium Synechocystis sp. PCC 6803 was examined using the chemical cross-linkers glutaraldehyde and N-ethyl-1-3-[3-(dimethylamino)propyl]carbodiimide to investigate the organization of the polypeptide subunits. Thylakoid membranes and photosystem I, which was isolated by Triton X-100 fractionation, were treated with cross-linking reagents and were resolved using a Tricine/urea low-molecular-weight resolution gel system. Subunit-specific antibodies and western blotting analysis were used to identify the components of cross-linked species. These analyses identified glutaraldehyde-dependent cross-linking products composed of small amounts of PsaD and PsaC, PsaC and PsaE, and PsaE and PsaF. The novel cross-link between PsaE and PsaF was also observed following treatment with N-ethyl-1-3-[3-(dimethylamino)propyl]carbodiimide. These cross-linking results suggest a structural interaction between PsaE and PsaF and predict a transmembrane topology for PsaF.     

Investigation of the quaternary structure of Neurospora pyruvate kinase by cross-linking with bifunctional reagents: the effect of substrates and allosteric ligands.

Pyruvate kinase (EC 2.7.1.40) of Neurospora, a tetramer composed of apparently identical subunits, has been shown to be a dimer of dimers by interprotomeric cross-linking experiments in which bifunctional reagents were used. An analysis of the polyacrylamide gel profiles of the enzyme after cross-linking with glutaraldehyde, dimethyl suberimidate, and dimethyl adipimidate shows that the extent of intersubunit cross-linking is influenced markedly by the ligand bound to the enzyme. Bifunctional cross-linking reagents with a shorter distance between the two functional groups form cross-links effectively in the unliganded enzyme. In the FDP-pyruvate kinase complex, cross-linking was observed over longer distances compared with the unliganded enzyme. It is demonstrated that covalent cross-linkers cah be used as sensitive indicators of conformational changes induced in pyruvate kinase by substrates and allosteric ligands.     

Temporal assessment of ribose treatment on self-assembled articular cartilage constructs

Articular cartilage cannot repair itself in response to degradation from injury or osteoarthritis. As such, there is a substantial clinical need for replacements of damaged cartilage. Tissue engineering aims to fulfill this need by developing replacement tissues in vitro. A major goal of cartilage tissue engineering is to produce tissues with robust biochemical and biomechanical properties. One technique that has been proposed to improve these properties in engineered tissue is the use of non-enzymatic glycation to induce collagen crosslinking, an attractive solution that may avoid the risks of cytotoxicity posed by conventional crosslinking agents such as glutaraldehyde. The objectives of this study were (1) to determine whether continuous application of ribose would enhance biochemical and biomechanical properties of self-assembled articular cartilage constructs, and (2) to identify an optimal time window for continuous ribose treatment. Self-assembled constructs were grown for 4 weeks using a previously established method and were subjected to continuous 7-day treatment with 30 mM ribose during culture weeks 1, 2, 3, or 4, or for the entire 4-week culture. Control constructs were grown in parallel, and all groups were evaluated for gross morphology, histology, cellularity, collagen and sulfated glycosaminoglycan (GAG) content, and compressive and tensile mechanical properties. Compared to control constructs, it was found that treatment with ribose during week 2 and for the entire duration of culture resulted in significant 62% and 40% increases in compressive stiffness, respectively; significant 66% and 44% increases in tensile stiffness; and significant 50% and 126% increases in tensile strength. Similar statistically significant trends were observed for collagen and GAG. In contrast, constructs treated with ribose during week 1 had poorer biochemical and biomechanical properties, although they were significantly larger and more cellular than all other groups. We conclude that non-enzymatic glycation with ribose is an effective method for improving tissue engineered cartilage and that specific temporal intervention windows exist to achieve optimal functional properties.     

Maturation of Collagen Ketoimine Cross-links by an Alternative Mechanism to Pyridinoline Formation in Cartilage

The tensile strength of fibrillar collagens depends on stable intermolecular cross-links formed through the lysyl oxidase mechanism. Such cross-links based on hydroxylysine aldehydes are particularly important in cartilage, bone, and other skeletal tissues. In adult cartilages, the mature cross-linking structures are trivalent pyridinolines, which form spontaneously from the initial divalent ketoimines. We examined whether this was the complete story or whether other ketoimine maturation products also form, as the latter are known to disappear almost completely from mature tissues. Denatured, insoluble, bovine articular cartilage collagen was digested with trypsin, and cross-linked peptides were isolated by copper chelation chromatography, which selects for their histidine-containing sequence motifs. The results showed that in addition to the naturally fluorescent pyridinoline peptides, a second set of cross-linked peptides was recoverable at a high yield from mature articular cartilage. Sequencing and mass spectral analysis identified their origin from the same molecular sites as the initial ketoimine cross-links, but the latter peptides did not fluoresce and were nonreducible with NaBH₄. On the basis of their mass spectra, they were identical to their precursor ketoimine cross-linked peptides, but the cross-linking residue had an M+188 adduct. Considering the properties of an analogous adduct of identical added mass on a glycated lysine-containing peptide from type II collagen, we predicted that similar dihydroxyimidazolidine structures would form from their ketoimine groups by spontaneous oxidation and free arginine addition. We proposed the trivial name arginoline for the ketoimine cross-link derivative. Mature bovine articular cartilage contains about equimolar amounts of arginoline and hydroxylysyl pyridinoline based on peptide yields.     

A new, mild cross-linking methodology to prepare cross-linked enzyme aggregates

Cross-linked enzyme aggregates (CLEAs) were prepared from several enzymes (penicillin G acylase, hydroxynitrile lyase, alcohol dehydrogenase, and two different nitrilases) by precipitation and subsequent cross-linking using dextran polyaldehyde. In most cases, higher immobilization yields were obtained using the latter cross-linker as compared with the commonly used glutaraldehyde. Active site titration of penicillin acylase CLEAs showed that the higher activity originated from a significantly lower loss in active sites using dextran polyaldehyde as a cross-linking agent. It is proposed that macromolecular cross-linkers are too large to penetrate the protein active site and react with catalytically essential amino acid residues.     

Preparation and characterization of a thermostable and biodegradable biopolymers using natural cross-linker

The present study describes preparation and characterization of a thermally stable and biodegradable biopolymer using collagen and a natural polymer, alginic acid (AA). Required concentration of alginic acid and collagen was optimized and the resulting biopolymer was characterized for, degree of cross-linking, mechanical strength, thermal stability, biocompatibility (toxicity) and biodegradability. Results reveal, the degree of cross-linking of alginic acid (at 1.5% concentration) with collagen was calculated as 75%, whereas it was 83% with standard cross-linking agent, glutaraldehyde (at 1.5% concentration). The AA cross-linked biopolymer was stable up to 245°C and Exhibits 5-6-fold increase in mechanical (tensile) strength compared to plain collagen (native) materials. However, glutaraldehyde cross-linked material exhibits comparatively less thermal stability and brittle in nature (low tensile strength). With regard to cell toxicity, no cytotoxicity was observed for AA cross-linked material when tested with mesenchymal cells and found degradable when treated with collagenase enzyme. The nature of bonding pattern and the reason for thermal stability of AA cross-linked collagen biopolymer was discussed in detail with the help of bioinformatics. A supplementary file on efficacy of AACC as a wound dressing material is demonstrated in detail with animal model studies.     

Improved cartilage integration and interfacial strength after enzymatic treatment in a cartilage transplantation model

The objective of the present study was to investigate whether treatment of articular cartilage with hyaluronidase and collagenase enhances histological and mechanical integration of a cartilage graft into a defect. Discs of 3 mm diameter were taken from 8-mm diameter bovine cartilage explants. Both discs and annulus were either treated for 24 hours with 0.1% hyaluronidase followed by 24 hours with 10 U/ml collagenase or left untreated (controls). Discs and annulus were reassembled and implanted subcutaneously in nude mice for 5 weeks. Integration of disc with surrounding cartilage was assessed histologically and tested biomechanically by performing a push-out test. After 5 weeks a significant increase in viable cell counts was seen in wound edges of the enzyme-treated group as compared with controls. Furthermore, matrix integration (expressed as a percentage of the total interface length that was connected; mean ± standard error) was 83 ± 15% in the treated samples versus 44 ± 40% in the untreated controls. In the enzyme-treated group only, picro-Sirius Red staining revealed collagen crossing the interface perpendicular to the wound surface. Immunohistochemical analyses demonstrated that the interface tissue contained cartilage-specific collagen type II. Collagen type I was found only in a small region of fibrous tissue at the level of the superficial layer, and collagen type III was completely absent in both groups. A significant difference in interfacial strength was found using the push-out test: 1.32 ± 0.15 MPa in the enzyme-treated group versus 0.84 ± 0.14 MPa in the untreated controls. The study shows that enzyme treatment of cartilage wounds increases histological integration and improves biomechanical bonding strength. Enzymatic treatment may represent a promising addition to current techniques for articular cartilage repair.     

羊毛防毡缩用蛋白酶的化学修饰

为减少防毡缩整理中蛋白酶对羊毛纤维主体结构的破坏作用,分别研究了戊二醛、微生物谷氨酰胺转氨酶(MTG)和水溶性碳二亚胺(EDC)对蛋白酶Savinase 16L的化学修饰,以期达到增大蛋白酶分子量,从而将水解作用限制在纤维表面的目的。主要通过体积排阻色谱、SDS-PAGE谱图以及荧光光谱研究修饰酶的分子量和结构变化。结果表明,戊二醛不能对蛋白酶分子进行有效修饰;MTG会被蛋白酶水解,无法催化酶分子间发生共价交联;而碳二亚胺既可以使蛋白酶分子间发生交联,又能将含有伯胺基的大分子修饰剂偶联到酶分子上。     

Effect of glutaraldehyde fixation on the frictional response of immature bovine articular cartilage explants

This study examined functional properties and biocompatibility of glutaraldehyde-fixed bovine articular cartilage over several weeks of incubation at body temperature to investigate its potential use as a resurfacing material in joint arthroplasty. In the first experiment, treated cartilage disks were fixed using 0.02, 0.20 and 0.60% glutaraldehyde for 24 h then incubated, along with an untreated control group, in saline for up to 28 d at 37 °C. Both the equilibrium compressive and tensile moduli increased nearly twofold in treated samples compared to day 0 control, and remained at that level from day 1 to 28; the equilibrium friction coefficient against glass rose nearly twofold immediately after fixation (day 1) but returned to control values after day 7. Live explants co-cultured with fixed explants showed no quantitative difference in cell viability over 28 d. In general, no significant differences were observed between 0.20 and 0.60% groups, so 0.20% was deemed sufficient for complete fixation. In the second experiment, cartilage-on-cartilage frictional measurements were performed under a migrating contact configuration. In the treated group, one explant was fixed using 0.20% glutaraldehyde while the apposing explant was left untreated; in the control group both explants were left untreated. From day 1 to 28, the treated group exhibited either no significant difference or slightly lower friction coefficient than the untreated group. These results suggest that a properly titrated glutaraldehyde treatment can reproduce the desired functional properties of native articular cartilage and maintain these properties for at least 28 d at body temperature.