Lipoprotein nature of the colicin A lysis protein: effect of amino acid substitutions at the site of modification and processing.

The colicin A lysis protein (Cal) is required for the release of colicin A to the medium by producing bacteria. This protein is produced in a precursor form that contains a cysteine at the cleavage site (-Leu-Ala-Ala-Cys). The precursor must be modified by the addition of lipid before it can be processed. The maturation is prevented by globomycin, an inhibitor of signal peptidase II. Using oligonucleotide-directed mutagenesis, the alanine and cystein residues in the -1 and +1 positions of the cleavage site were replaced by proline and threonine residues, respectively, in two different constructs. Both substitutions prevented the normal modification and cleavage of the protein. The marked activation of the outer membrane detergent-resistant phospholipase A observed with wild-type Cal was not observed with the Cal mutants. Both Cal mutants were also defective for the secretion of colicin A. In one mutant, the signal peptide appeared to be cleaved off by an alternative pathway involving signal peptidase I. Electron microscope studies with immunogold labeling of colicin A on cryosections of pldA and cal mutant cells indicated that the colicin remains in the cytoplasm and is not transferred to the periplasmic space. These results demonstrate that Cal must be modified and processed to activate the detergent-resistant phospholipase A and to promote release of colicin A.     

The acylated precursor form of the colicin A lysis protein is a natural substrate of the DegP protease.

The acylated precursor form of the colicin A lysis protein (pCalm) is specifically cleaved by the DegP protease into two acylated fragments of 6 and 4.5 kilodaltons (kDa). This cleavage was observed after globomycin treatment, which inhibits the processing of pCalm into mature colicin A lysis protein (Cal) and the signal peptide. The cleavage took place in lpp, pldA, and wild-type strans carrying plasmids which express the lysis protein following SOS induction and also in cells containing a plasmid which expresses it under the control of the tac promoter. Furthermore, the DegP protease was responsible for the production of two acylated Cal fragments of 3 and 2.5 kDa in cells carrying plasmids which overproduce the Cal protein, without treatment with globomycin. DegP could also cleave the acylated precursor form of a mutant Cal protein containing a substitution in he amino-terminal portion of the protein, but not that of a mutant Cal containing a frameshift mutation in its carboxyl-terminal end. The functions of Cal in causing protein release, quasi-lysis, and lethality were increased in degP41 cells, suggesting that mature Cal was produced in higher amounts in the mutant than in the wild type. These effects were limited in cells deficient in phospholipase A. Interactions between the DegP protease and phospholipase A were suggested by the characteristics of degP pldA double mutants.     

Colicin E2 release: lysis,leakage or secretion? Possible role of a phospholipase.

Results presented here and by others indicate that the release of colicins from producing cells can be uncoupled from the decline in culture turbidity which usually occurs within 2-3 h after the induction of colicin synthesis. This excludes lysis as a necessary event in colicin release. Conversely, the failure to dissociate colicin release from the normally simultaneous release of a specific subset of soluble proteins argues against the idea of a specific colicin secretion system sensu-stricto. Rather, colicin release appears to be a consequence of semi-specific leakage resulting from an alteration of the permeability properties of the cell envelope. This alteration is caused by the 'lysis protein' known to be encoded by most multiple copy number Col plasmids. The finding that the expression of the lysis gene of plasmid ColE2 renders the cells exquisitely sensitive to lysozyme demonstrates that the permeability of the outer membrane must indeed be altered. Evidence is presented that this alteration could be due at least in part to the activation of the detergent-resistant phospholipase A (pldA product). Lysophosphatidylethanolamine, a product of the action of phospholipase on phosphatidylethanolamine, is a membrane perturbant which could alter the permeability properties of the envelope and allow some proteins such as colicin to leak out of the cell.     

Functioning of the colicin A lysis protein is affected by Triton X-100, divalent cations and EDTA

The colicin A lysis protein, Cal, is synthesized at the same time as colicin A by Escherichia coli harbouring plasmid pColA after induction by mitomycin C. Its function in the induced bacteria involves the release of colicin A, quasi-lysis, the death of the producing cells and the activation of the outer membrane phospholipase A. We have found that these various functions are affected differently by treatment of the induced cells with Triton X-100, divalent cations or EDTA. Triton X-100 and EDTA caused increased quasi-lysis and a higher level of mortality of the producing cells, but while Triton X-100 enhanced the release of colicin A, EDTA reduced it. Divalent cations protected the cells against both killing and quasi-lysis without greatly affecting colicin release. The effects of these agents were similar for both wild-type and phospholipase A mutants and depended only on the presence of a functional cal gene.     

Synthesis and functioning of the colicin E1 lysis protein: comparison with the colicin A lysis protein.

The colicin E1 lysis protein, CelA, was identified as a 3-kDa protein in induced cells of Escherichia coli K-12 carrying pColE1 by pulse-chase labeling with either [35S]cysteine or [3H]lysine. This 3-kDa protein was acylated, as shown by [2-3H]glycerol labeling, and seemed to correspond to the mature CelA protein. The rate of modification and processing of CelA was different from that observed for Cal, the colicin A lysis protein. In contrast to Cal, no intermediate form was detected for CelA, no signal peptide accumulated, and no modified precursor form was observed after globomycin treatment. Thus, the rate of synthesis would not be specific to lysis proteins. Solubilization in sodium dodecyl sulfate of the mature forms of both CelA and Cal varied similarly at the time of colicin release, indicating a change in lysis protein structure. This particular property would play a role in the mechanism of colicin export. The accumulation of the signal peptide seems to be a factor determining the toxicity of the lysis proteins since CelA provoked less cell damage than Cal. Quasi-lysis and killing due to CelA were higher in degP mutants than in wild-type cells. They were minimal in pldA mutants.     

Induction of membrane permeability in Escherichia coli mediated by lysis protein of the ColE7 operon

Induction of the lysis protein of the ColE operon is known to be essential for colicin release. Thus far, the involvement of inner membrane in this unique protein exportation process has not been elucidated. In this work, fluorescent dyes were used to monitor the permeability change of both inner and outer membranes in response to induction of the lysis protein. We found that induction of permeability of the inner membrane appeared earlier than that of the outer membrane before the occurrence of the decline in culture turbidity. Interestingly, we also found that change of outer membrane permeability was alleviated in the outer membrane phospholipase A (OMPLA)-deficient mutant 135 min after induction. Thus, in this work, we show that permeability change of the inner membrane induced by the lysis protein is likely involved in the basal level of colicin release. A greater release of colicin coincided with the decline in culture turbidity and should be associated with the activation of OMPLA at the late stage of induction of the lysis protein.     

Delineation of the translocation of colicin E7 across the inner membrane of <Emphasis Type="Italic">Escherichia coli</Emphasis>

The lysis protein of the colicinogenic operon is essential for colicin release and its main function is to activate the outer membrane phospholipase A (OMPLA) for the traverse of colicin across the cell envelope. However, little is known about the involvement of the lysis protein in the translocation of colicin across the inner membrane into the periplasm. The introduction of specific point mutations into the lipobox or sorting signal sequence of the lysE7 gene resulted in the production of various forms of lysis proteins. Our experimental results indicated that cells with wild-type mature LysE7 protein exhibited higher efficiency of colicin E7 translocation across the inner membrane into the periplasm than those with premature LysE7 protein. Moreover, the degree of permeability of the inner membrane induced by the mature LysE7 protein was significantly increased as compared to the unmodified LysE7 precursor. These results suggest that the efficiency of colicin movement into the periplasm is correlated with the increase in inner membrane permeability induced by the LysE7 protein. Thus, we propose that mature LysE7 protein has two critical roles: firstly mediating the translocation of colicin E7 across the inner membrane into the periplasm, and secondly activating the OMPLA to allow colicin release.     

Amino acid sequence and length requirements for assembly and function of the colicin A lysis protein.

The roles of the various parts of the mature colicin A lysis protein (Cal) in its assembly into the envelope and its function in causing "quasi-lysis," the release of colicin A, and the activation of phospholipase A were investigated. By using cassette mutagenesis, many missense mutations were introduced into the highly conserved portion of the lysis protein. In vitro mutagenesis was also used to introduce stop codons after amino acids 16 and 18 and a frameshift mutation at amino acid 17 of the mature Cal sequence. The processing and modification of the mutants were identical to those of the wild type, except for the truncated Cal proteins, which were neither acylated nor processed. Thus, the carboxy-terminal half of Cal must be present (or replaced by another peptide) for the proper processing and assembly of the protein. However, the specific sequence of this region is not required for the membrane-damaging function of the protein. Furthermore, the sequence specificity for even the conserved amino acids of the amino-terminal half of the protein is apparently exceedingly relaxed, since only those mutant Cal proteins in which a highly conserved amino acid has been replaced by a glutamate were impaired in their function.     

Bacteriocin Release Protein Triggers Dimerization of Outer Membrane Phospholipase A In Vivo

Bacteriocin release protein is known to activate outer membrane phospholipase A (OMPLA), which results in the release of colicin from Escherichia coli. In vivo chemical cross-linking experiments revealed that the activation coincides with dimerization of OMPLA. Permeabilization of the cell envelope and dimerization were characterized by a lag time of 2 h.     

Colicin E2 production and release by Escherichia coli K12 and other Enterobacteriaceae

Previous work has shown that Escherichia coli K12 ColE2+ cells undergo a form of partial lysis and exhibit increases in lysophosphatidylethanolamine (lysoPE) and free fatty acid content due to activation of phospholipase A when induced to produce and release colicin E2. The increase in lysoPE content was assumed to be essential for efficient colicin release. These same characteristics are also presented by some natural ColE2+ isolates, and by other representatives of the Enterobacteriaceae after transformation with derivatives of a ColE2 plasmid. However, Salmonella typhimurium strains carrying ColE2 plasmids released colicin without partial lysis and without increasing their lysoPE content. A previously undetected minor phospholipid, which appeared in these and other strains only when they were induced to produce colicin, may be an important factor in colicin release. In ColE2+ E. coli K12, production of this new lipid was dependent on phospholipase A activation following expression of the ColE2 lysis gene. Some other ColE2+ strains did not respond to induction of colicin production in the same way as ColE2+ E. coli K12. These strains were less sensitive to inducer (mitomycin C) or unable to produce increased amounts of colicin in response to induction, or unable to degrade colicin once it was released. In general, the results suggest that colicin release occurs by the same or similar processes in the various strains tested, and support the continued use of E. coli K12 as the model strain for studying the mechanisms of colicin release.     

Rapid Method for Isolation of Large Quantities of Outer Membrane from Escherichia coli K-12 and Its Application to the Study of Envelope Mutants

A rapid method for the isolation of large quantities of bacterial outer membrane is described. This cell envelope component was removed from plasmolyzed cells of Escherichia coli K-12 by lysozyme-ethylenediaminetetra-acetic acid treatment, aggregated by lowering the pH to 5.0, and recovered by centrifugation. Aggregates of membrane fragments were clearly identified in an electron microscope. A criterion of homogeneity of the preparation was obtained by isopycnic sucrose gradient centrifugation. A single band appeared at a density of 1.24 g/cc. The cytoplasmic membrane marker, succinate dehydrogenase activity, was 40 times lower in the outer membrane preparation than in complete cell envelope preparations. A rich activity was, however, found for the outer membrane marker, phospholipase A. The compositions of outer membranes from a transductant pair were compared. One transductant was a chain-forming, antibiotic-supersensitive envA strain, whereas the other contained the envA(+) allele. The envA strain showed a slightly modified protein pattern and a lower relative content of phosphatidylglycerol.     

Assembly of colicin A in the outer membrane of producing Escherichia coli cells requires both phospholipase A and one porin,but phospholipase A is sufficient for secretion

Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.     

Localization and assembly into the Escherichia coli envelope of a protein required for entry of colicin A.

Mutations in tolQ, previously designated fii, render cells tolerant to high concentrations of colicin A. In addition, a short deletion in the amino-terminal region of colicin A (amino acid residues 16 to 29) prevents its lethal action, although this protein can still bind the receptor and forms channels in planar lipid bilayers in vitro. These defects in translocation across the outer membrane in the tolQ cells or the colicin A mutant cannot be bypassed by osmotic shock. The TolQ protein, which is constitutively expressed at a low level, was studied in recombinant plasmid constructs allowing the expression of various TolQ fusion proteins under the control of the inducible caa promoter. The TolQ protein was thus "tagged" with an epitope from the colicin A protein for which a monoclonal antibody is available. A fusion protein containing the entire TolQ protein plus the 30 N-terminal residues of colicin A was shown to complement the tolQ mutation. Pulse-chase labeling followed by gradient fractionation indicated that the bulk of the overproduced fusion protein was rapidly incorporated into the inner membrane, with small amounts localized to regions corresponding to the attachment sites between inner and outer membranes and to the outer membrane itself. However, most of the protein was rapidly degraded, leaving only that localized to the attachment sites and the outer membrane remaining at very late times of chase.     

Effects of divalent cations and of phospholipase A activity on excretion of cloacin DF13 and lysis of host cells

Induction of cloacin DF13 synthesis in Escherichia coli harbouring plasmid CloDF13 results in the release of cloacin DF13, inhibition of growth and ultimately in lysis of the host cells. Expression of the pCloDF13-encoded protein H is essential for both the release of cloacin DF13 and the lysis of the cells. The divalent cations Mg2+ and Ca2+ interfered with the mitomycin C-induced protein H-dependent lysis, but hardly affected the release of cloacin DF13. Essentially all of the bacteriocin was released from the cells before a detectable degradation of the peptidoglycan occurred, independent of the presence of mitomycin C. Experiments with phospholipase A mutants revealed that activation of detergent-resistant phospholipase A was essential for the export of cloacin DF13 across the outer membrane and the lysis of induced cells. Transport of cloacin DF13 across the cytoplasmic membrane was mainly dependent on protein H. A revised model for the excretion of cloacin DF13 is presented.     

Pore-forming colicins: synthesis, extracellular release, mode of action, immunity

Colicins are bacterial toxins encoded by plasmids which also confer immunity to producing cells. In a first stage, colicins are synthesized in the cytoplasm of colicinogenic cells. Subsequently they are released into the extracellular medium following the action of a small protein synthesized coordinately with the colicins. This protein is a lipoprotein and causes a non-specific increase in the envelope permeability, in particular, through the activation of an outer membrane phospholipase. After release into the medium, colicins kill sensitive cells in 3 defined steps: adsorption onto a specific receptor at the surface of the bacterium, translocation across the outer membrane and action. A specific domain of the colicin molecule is responsible for each of these steps. The most common colicins are those which kill by depolarizing the cytoplasmic membrane with the formation of voltage-dependent ionic channels. Immunity is conferred to producing cells by a membrane protein which interacts with the colicin and prevents formation or functioning of these ionic channels formed by its C-terminal domain.     

In Vivo Analysis of Sequence Requirements for Processing and Degradation of the Colicin A Lysis Protein Signal Peptide

The lipid modification and processing of a number of colicin lysis proteins take place exceedingly slowly and result in the release of a stable signal peptide. It is possible that this peptide or the presence of lipid-modified precursors which result from the slow processing plays a role in the release of colicins and in the quasilysis that occurs in induced colicinogenic cultures. We used in vitro mutagenesis and pulse-chase radiolabeling and immunoprecipitation to examine the reasons for the slow processing and signal peptide degradation reactions for the colicin A lysis protein (Cal). In one mutant, isoleucine 13 was replaced with serine, and in another, alanine 18, the last residue of the signal peptide, was replaced with glycine. In each case, the mutation caused a striking increase in the rate of maturation of the precursor, and in the case of the serine 13 derivative, the mutation also destabilized the signal peptide. A precursor containing both of these mutations was completely matured and its signal sequence degraded within seconds of its synthesis. The release of colicin A and the quasilysis of producing cultures were unchanged for each of these mutants, indicating that neither the stable signal peptide nor lipid-modified processing intermediates of Cal are required for either of these events in wild-type cells.     

Absence of the outer membrane phospholipase A suppresses the temperature-sensitive phenotype of Escherichia coli degP mutants and induces the Cpx and sigma(E) extracytoplasmic stress responses

DegP is a periplasmic protease that is a member of both the sigma(E) and Cpx extracytoplasmic stress regulons of Escherichia coli and is essential for viability at temperatures above 42 degrees C. [U-(14)C]acetate labeling experiments demonstrated that phospholipids were degraded in degP mutants at elevated temperatures. In addition, chloramphenicol acetyltransferase, beta-lactamase, and beta-galactosidase assays as well as sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis indicated that large amounts of cellular proteins are released from degP cells at the nonpermissive temperature. A mutation in pldA, which encodes outer membrane phospholipase A (OMPLA), was found to rescue degP cells from the temperature-sensitive phenotype. pldA degP mutants had a normal plating efficiency at 42 degrees C, displayed increased viability at 44 degrees C, showed no degradation of phospholipids, and released far lower amounts of cellular protein to culture supernatants. degP and pldA degP mutants containing chromosomal lacZ fusions to Cpx and sigma(E) regulon promoters indicated that both regulons were activated in the pldA mutants. The overexpression of the envelope lipoprotein, NlpE, which induces the Cpx regulon, was also found to suppress the temperature-sensitive phenotype of degP mutants but did not prevent the degradation of phospholipids. These results suggest that the absence of OMPLA corrects the degP temperature-sensitive phenotype by inducing the Cpx and sigma(E) regulons rather than by inactivating the phospholipase per se.     

Two-stage model for integration of the lysis protein E of ΦX174 into the cell envelope of Escherichia coli

Abstract: As a tool for determining the topology of the small, 91-amino acid ΦX174 lysis protein E within the envelope complex of Escherichia coli , a lysis active fusion of protein E with streptavidin (E-FXa-StrpA) was used. The E-FXa-StrpA fusion protein was visualised using immune electron microscopy with gold-conjugated anti-streptavidin antibodies within the envelope complex in different orientations. At the distinct areas of lysis characteristic for protein E, the C-terminal end of the fusion protein was detected at the surface of the outer membrane, whereas at other areas the C-terminal portion of the protein was located at the cytoplasmic side of the inner membrane. These results suggest that a conformational change of protein E is necessary to induce the lysis process, an assumption supported by proteinase K protection studies. The immune electron microscopic data and the proteinase K accessibility studies of the E-FXa-StrA fusion protein were used for the working model of the E-mediated lysis divided into three phases: phase 1 is characterised by integration of protein E into the inner membrane without a cytoplasmic status in a conformation with its C-terminal part facing the cytoplasmic side; phase 2 is characterised by a conformational change of the protein transferring the C-terminus across the inner membrane; phase 3 is characterised by a fusion of the inner and outer membranes and is associated with a transfer of the C-terminal domain of protein E towards the surface of the outer membrane of E. coli.     

Structure and dynamics of the colicin E1 channel

The toxin-like and bactericidal colicin E1 molecule is of interest for problems of toxin action, polypeptide translocation across membranes, voltage-gated channels, and receptor function. Colicin E1 binds to a receptor in the outer membrane and is translocated across the cell envelope to the inner membrane. Import of the colicin channel-forming domain into the inner membrane involves a translocation-competent intermediate state and a membrane potential-dependent movement of one third to one half of the channel peptide into the membrane bilayer. The voltage-gated channel has a conductance sufficiently large to depolarize the Escherichia coli cytoplasmic membrane. Amino acid residues that affect the channel ion selectivity have been identified by site-directed mutagenesis. The colicin E1 channel is one of a few membrane proteins whose secondary structures in the membrane, predominantly alpha-helix, have been determined by physico-chemical techniques. Hypothesis for the identity of the trans-membrane helices, and the mechanism of binding to the membrane, are influenced by the solved crystal structure of the soluble colicin A channel peptide. The protective action of immunity protein is a unique aspect of the colicin problem, and information has been obtained, by genetic techniques, about the probable membrane topography of the imm gene product.