Connectin filaments in stretched skinned fibers of frog skeletal muscle

Indirect immunofluorescence microscopy of highly stretched skinned frog semi-tendinous muscle fibers revealed that connectin, an elastic protein of muscle, is located in the gap between actin and myosin filaments and also in the region of myosin filaments except in their centers. Electron microscopic observations showed that there were easily recognizable filaments extending from the myosin filaments to the I band region and to Z lines in the myofibrils treated with antiserum against connectin. In thin sections prepared with tannic acid, very thin filaments connected myosin filaments to actin filaments. These filaments were also observed in myofibrils extracted with a modified Hasselbach-Schneider solution (0.6 M KCl, 0.1 M phosphate buffer, pH 6.5, 2 mM ATP, 2 mM MgCl2, and 1 mM EGTA) and with 0.6 M Kl. SDS PAGE revealed that connectin (also called titin) remained in extracted myofibrils. We suggest that connectin filaments play an important role in the generation of tension upon passive stretch. A scheme of the cytoskeletal structure of myofibrils of vertebrate skeletal muscle is presented on the basis of our present information of connectin and intermediate filaments.     

Binding of actin filaments to connectin

The binding of actin filaments to connectin, a muscle elastic protein, was investigated by means of turbidity and sedimentation measurements and electron microscopy. In the presence of less than 0.12 M KCl at pH 7.0, actin filaments bound to connectin. Long actin filaments formed bundles. Short actin filaments also aggregated into irregular bundles or a meshwork, and were frequently attached perpendicularly to long bundles. The binding of F-actin to connectin was saturated at an equal weight ratio (molar ratio, 50 : 1), as determined by a cosedimentation assay. Larger amounts of sonicated short actin filaments appeared to bind to connectin than intact F-actin. Myosin S1-decorated actin filaments did not bind to connectin. The addition of S1 to connectin-induced actin bundles resulted in partial disaggregation. Thus, connectin does not appear to interfere with actin-myosin interactions, since myosin S1 binds to actin more strongly than connectin.     

Interactions of muscle beta-connectin with myosin, actin, and actomyosin at low ionic strengths

The interaction of the muscle elastic protein connectin with myosin and actin filaments was investigated by turbidimetry, viscosity, flow birefringence measurements, and electron microscopic observations. In KCl concentrations lower than 0.15 M at pH 7.0 at 25 degrees C, both myosin and actin filaments were aggregated by connectin. Myosin filaments were entangled with each other in the presence of connectin. Actin filaments were assembled into bundles under the influence of connectin just as under that of alpha-actinin. The physiological significance of the interactions of connectin with myosin and actin filaments is discussed in relation to the localization of connectin in myofibrils. The Mg2+-activated ATPase activity of actomyosin was appreciably enhanced by connectin in the presence of KCl concentrations lower than 0.1 M. The extent of activation by connectin was smaller than by alpha-actinin. The enhancement of the ATPase activity may be due to acceleration of the onset of superprecipitation of actomyosin.     

Proteolytic fragments of connectin cause aggregation of myosin filaments but not of actin filaments

Proteolytic fragments of 400 kD isolated from chymotrypsin-treated connectin, a muscle elastic protein, still retained the ability to cause aggregation of myosin filaments but lost the actin-bundling action. Tryptic digests of connectin showed similar effects. However, when connectin was hydrolyzed by pepsin to peptides smaller than approximately 40 kD, no such action was seen for both myosin and actin filaments. It is suggested that the actin bundling action of connectin filaments is due to topological restrictions. A modified reproducible procedure for the preparation of native connectin from chicken breast muscle is described in detail.     

Elastic filaments in situ in cardiac muscle: deep-etch replica analysis in combination with selective removal of actin and myosin filaments

To clarify the full picture of the connectin (titin) filament network in situ, we selectively removed actin and myosin filaments from cardiac muscle fibers by gelsolin and potassium acetate treatment, respectively, and observed the residual elastic filament network by deep-etch replica electron microscopy. In the A bands, elastic filaments of uniform diameter (6-7 nm) projecting from the M line ran parallel, and extended into the I bands. At the junction line in the I bands, which may correspond to the N2 line in skeletal muscle, individual elastic filaments branched into two or more thinner strands, which repeatedly joined and branched to reach the Z line. Considering that cardiac muscle lacks nebulin, it is very likely that these elastic filaments were composed predominantly of connectin molecules; indeed, anti-connectin monoclonal antibody specifically stained these elastic filaments. Further, striations of approximately 4 nm, characteristic of isolated connectin molecules, were also observed in the elastic filaments. Taking recent analyses of the structure of isolated connectin molecules into consideration, we concluded that individual connectin molecules stretched between the M and Z lines and that each elastic filament consisted of laterally-associated connectin molecules. Close comparison of these images with the replica images of intact and S1-decorated sarcomeres led us to conclude that, in intact sarcomeres, the elastic filaments were laterally associated with myosin and actin filaments in the A and I bands, respectively. Interestingly, it was shown that the elastic property of connectin filaments was not restricted by their lateral association with actin filaments in intact sarcomeres. Finally, we have proposed a new structural model of the cardiac muscle sarcomere that includes connectin filaments.     

Dense precipitate of brain tubulin with skeletal muscle myosin

Purified tubulin from porcine brain formed a dense precipitate at 37 degrees C with muscle myosin filaments from rabbit skeletal muscle; this effect was greater than that with partially purified tubulin. ATP or GTP, which prevented the myosin filaments from precipitating, inhibited the formation of the dense precipitate, but did not dissociate the dense precipitate once formed. The dense precipitate was found by thin-section electron microscopy to be composed to side-by-side aggregates of myosin filaments whose projections might be decorated by tubulin. The decoration was also seen by negative-stain electron microscopy. The binding of tubulin to myosin filaments decreased the Mg2+- and Ca2+-GTPase activity of the myosin by about half, but did not affect either Mg2+- or Ca2+-ATPase activity. The binding ratio of tubulin to myosin in the presence of 5 mM MgCl2 was 2.2 mol/mol using purified tubulin and 1.8 mol/mol using partially purified tubulin. Five mM ATP and GTP in the presence of 5 mM MgCl2 decreased the tubulin binding by 1.6-2.0 and 1.1-1.3 mol/mol, respectively, when added before an encounter of tubulin with myosin filaments, but did not cause any decrease when added after such an encounter.     

Organization of connectin/titin filaments in sarcomeres of differentiating chicken skeletal muscle cells

Very long, elastic connectin/titin molecules position the myosin filaments at the center of a sarcomere by linking them to the Z line. The behavior of the connectin filaments during sarcomere formation in differentiating chicken skeletal muscle cells was observed under a fluorescent microscope using the antibodies to the N terminal (located in the Z line), C terminal (M line), and C zone (myosin filament) regions of connectin and was compared to the incorporation of -actinin and myosin into forming sarcomeres. In early stages of differentiating muscle cells, the N terminal region of connectin was incorporated into a stress fiber-like structure (SFLS) together with -actinin to form dots, whereas the C terminal region was diffusely distributed in the cytoplasm. When both the C and N terminal regions formed striations in young myofibrils, the epitope to the C zone of A-band region, that is the center between the A-I junction and the M-line, initially was diffuse in appearance and later formed definite striations. It appears that it took some time for the N and C terminal regions of connectin to form a regular organization in a sarcomere. Thus the two ends of the connectin filaments were first fixed followed by the specific binding of the middle portion onto the myosin filament during sarcomere formation.     

Developmental relationship of myosin binding proteins (myomesin, connectin and C-protein) to myosin in chicken somites as studied by immunofluorescence microscopy

The developmental relationship of myosin binding proteins (myomesin, connectin and C-protein) to myosin was studied in chicken cervical somites by immunofluorescence microscopy. Muscle and non-muscle myosins initially appeared as slender rods at the same sites, and then, fused to form non-striated fibrils. As muscle myosin formed striated structures (A bands), non-muscle myosin disappeared from this structure. Myomesin (reactive with monoclonal antibodies MyB4 and MyBB78) and connectin (carboxy terminal region, reactive with monoclonal antibody T51) were seen as dots in the center of these myosin rods. These proteins then formed characteristic mature striations on non-striated fibrils of myosin. Earlier alignment of these myosin binding proteins rather than myosin indicates that the correct assembly of these proteins seems to be related to the formation of initial myosin rods as well as subsequent linear and periodic alignment of myosin molecules to form early A bands. Connectin spots reactive with 9D10 were scattered around myosin rods/myomesin dots/connectin T51 dots. These spots may represent radiating connectin filaments from these rods/dots to link myosin rods to the I-Z-I structures of myofibrils to be incorporated. Since the slow isoform of C-protein formed its characteristic bands ("doublets") prior to H zone formation within A bands by myosin, this isoform may help to precisely align myosin filaments within the A band region. The presence of the slow, then the slow and the cardiac, and finally the co-existence of the slow and the fast isoforms of C-protein may interfere with the incorporation and co-polymerization of non-adult isoforms into myofibrils.     

The influence of substoichiometric concentrations of myosin subfragment 1 on the state of aggregation of actin under depolymerizing conditions

In 3 mM KCl, 2 mM Tris/HCl pH 7.5, 22 degrees C, 0.38 microM myosin subfragment 1 delays the depolymerization of F-actin (7.2 microM measured as monomer). The depolymerization proceeds rapidly for a few minutes and then slows down suddenly when the ratio between the monomers in the actin filaments and myosin subfragment 1 reaches the value of 11. At this time myosin subfragment 1 is substantially all bound to the actin polymers which form an irregular and discontinuous network of filaments running in doublets and in triplets, perhaps cross-linked by myosin subfragment 1. Depolymerization proceeds then for several hours, apparently ending up with the formation of the 1:1 actin-S1 heteropolymer. The ratio between the monomers in the actin filaments and myosin subfragment 1 at the end of the rapid depolymerization process is different for different protein preparations and may be as low as 5.5. In 2 mM Tris/HCl pH 7.5, 25 degrees C, 1 microM myosin subfragment 1 is able to induce the formation of undecorated actin filaments from 12 microM ATP--G-actin. These filaments probably originate by redistribution of myosin subfragment 1 between the newly formed 1/1 actin-S1 heteropolymer and G-actin in the medium, a process which allows the transient formation of undecorated actin filaments.     

Native connectin from porcine cardiac muscle

Native connectin was isolated from porcine cardiac muscle using the method developed for the preparation of native connectin from chicken breast muscle (Kimura et al. (1984) J. Biochem. 96, 1947-1950). It was not necessary to keep cardiac muscle at 0 degrees C before preparation: the proteolysis of alpha-connectin to beta-connectin proceeded during the preparation of myofibrils. Cardiac connectin showed almost the same properties as those of skeletal muscle connectin: mobility in SDS gel electrophoresis, filamentous structure under an electron microscope, circular dichroism spectra, UV absorption spectra, and amino acid composition. Porcine cardiac connectin cross-reacted with antiserum against chicken breast muscle connectin as revealed by an immunoblot method. Immunoelectron microscopical observations revealed an abundance of connectin antigenic sites around the A-I junction area of cardiac myofibrils. Cardiac connectin also interacted with myosin and actin filaments at low ionic strengths to form aggregates. The extent of interaction was somewhat weaker in the case of cardiac connectin than skeletal muscle connectin, regardless of the origin of myosin and actin (porcine cardiac and rabbit skeletal muscles). In conclusion, cardiac connectin is very similar, but not identical to skeletal muscle connectin.     

Isolation and characterization of covalently cross-linked actin dimer

Covalently cross-linked actin dimer was isolated from rabbit skeletal muscle F-actin reacted with phenylenebismaleimide (Knight, P., and Offer, G. (1978) Biochem. J. 175, 1023-1032). The UV spectrum of the purified cross-linked actin dimer, in a nonpolymerizing buffer, was very similar to that of native F-actin and not to the spectrum of G-actin. Cross-linked actin dimer polymerized to filaments that were indistinguishable in the electron microscope from F-actin made from native G-actin and that were similar to native F-actin in their ability to activate the Mg2+-ATPase of myosin subfragment-1. The critical concentrations of polymerization of cross-linked actin dimer in 0.5 mM and 2.0 mM MgCl2, 2 to 4 microM, and 1 to 2 microM, respectively, were similar to the values for native G-actin. Cross-linked actin dimer contained 2 mol of bound nucleotide/mol of dimer. One bound nucleotide exchanged with ATP in solution with a t 1/2 of 55 min and with ADP with a t 1/2 of 5 h. The second bound nucleotide exchanged much more slowly. The more rapidly exchangeable site contained 10 to 15% bound ADP.Pi and 85 to 90% bound ATP while the second site contained much less, if any, bound ADP.Pi. Cross-linked actin dimer had an ATPase activity in 0.5 mM MgCl2 that was 7 times greater than the ATPase activity of native G-actin and that was also stimulated by cytochalasin D. These data are discussed in relation to the possible role of ATP in actin polymerization and function with the speculation that the cross-linked actin dimer may serve simultaneously as a useful model for each of the two different ends of native F-actin.     

Connectin filaments link thick filaments and Z lines in frog skeletal muscle as revealed by immunoelectron microscopy

In an earlier study connectin, an elastic protein of striated muscle, was found to be associated with "gap filaments" originating from the thick filaments in the myofibril, but it was not clear whether it extends to Z lines or not (Maruyama, K., H. Sawada, S. Kimura, K. Ohashi, H. Higuchi, and Y. Umazume, 1984, J. Cell Biol., 99:1391-1397). In the present immunoelectron microscopic study using polyclonal antibodies against native connectin, we have concluded that the connectin structures are directly linked to Z lines from the thick (myosin) filaments in myofibrils of skinned fibers of frog skeletal muscle. There were five distinct antibody-binding stripes in each half of the A band and two stripes in the A-I junction region. Deposits of antibodies were recognized in I bands and Z lines. We suggest that connectin filaments run alongside the thick filaments, starting from a region approximately 0.15 micron from the center of the A band.     

Effect of heavy chain phosphorylation on the polymerization and structure of Dictyostelium myosin filaments

In Dictyostelium amebas, myosin appears to be organized into filaments that relocalize during cell division and in response to stimulation by cAMP. To better understand the regulation of myosin assembly, we have studied the polymerization properties of purified Dictyostelium myosin. In 150 mM KCl, the myosin remained in the supernate following centrifugation at 100,000 g. Rotary shadowing showed that this soluble myosin was monomeric and that approximately 80% of the molecules had a single bend 98 nm from the head-tail junction. In very low concentrations of KCl (less than 10 mM) the Dictyostelium myosin was also soluble at 100,000 g. But rather than being monomeric, most of the molecules were associated into dimers or tetramers. At pH 7.5 in 50 mM KCl, dephosphorylated myosin polymerized into filaments whereas myosin phosphorylated to a level of 0.85 mol Pi/mol heavy chain failed to form filaments. The phosphorylated myosin could be induced to form filaments by lowering the pH or by increasing the magnesium concentration to 10 mM. The resulting filaments were bipolar, had blunt ends, and had a uniform length of approximately 0.43 micron. In contrast, filaments formed from fully dephosphorylated myosin were longer, had tapered ends, and aggregated to form very long, threadlike structures. The Dictyostelium myosin had a very low critical concentration for assembly of approximately 5 micrograms/ml, and this value did not appear to be affected by the level of heavy chain phosphorylation. The concentration of polymer at equilibrium, however, was significantly reduced, indicating that heavy chain phosphorylation inhibited the affinity of subunits for each other. Detailed assembly curves revealed that small changes in the concentration of KCl, magnesium, ATP, or H+ strongly influenced the degree of assembly. Thus, changes in both the intracellular milieu and the level of heavy chain phosphorylation may control the location and state of assembly of myosin in response to physiological stimuli.     

ATP-linked monomer-polymer equilibrium of smooth muscle myosin: the free folded monomer traps ADP.Pi.

In vitro and at physiological ionic strength, unphosphorylated smooth muscle myosin filaments dissolve on addition of ATP, forming folded (10S) myosin monomers. By following the fate of ATP and the time course of filament disassembly we have established details of the mechanism of this process. Myosin filaments first bind and hydrolyse 2.0 mol/mol of ATP before significant filament dissolution occurs. Following dissolution, the hydrolysis products ADP.Pi are retained on the heads of the folded myosin monomers, and are released so slowly (half time approximately 100 min at 100 mM KCl) as to be effectively trapped. The straight (6S) conformation of myosin, stable at greater than 225 mM KCl, did not exhibit this product trapping, and neither did myosin filaments held under conditions which disfavour ATP-induced disassembly. The implications of these results for filament stability in vivo are discussed in terms of a simple, testable model for smooth muscle myosin self-assembly.     

Caenorhabditis elegans kettin, a large immunoglobulin-like repeat protein, binds to filamentous actin and provides mechanical stability to the contractile apparatuses in body wall muscle

Kettin is a large actin-binding protein with immunoglobulin-like (Ig) repeats, which is associated with the thin filaments in arthropod muscles. Here, we report identification and functional characterization of kettin in the nematode Caenorhabditis elegans. We found that one of the monoclonal antibodies that were raised against C. elegans muscle proteins specifically reacts with kettin (Ce-kettin). We determined the entire cDNA sequence of Ce-kettin that encodes a protein of 472 kDa with 31 Ig repeats. Arthropod kettins are splice variants of much larger connectin/titin-related proteins. However, the gene for Ce-kettin is independent of other connectin/titin-related genes. Ce-kettin localizes to the thin filaments near the dense bodies in both striated and nonstriated muscles. The C-terminal four Ig repeats and the adjacent non-Ig region synergistically bind to actin filaments in vitro. RNA interference of Ce-kettin caused weak disorganization of the actin filaments in body wall muscle. This phenotype was suppressed by inhibiting muscle contraction by a myosin mutation, but it was enhanced by tetramisole-induced hypercontraction. Furthermore, Ce-kettin was involved in organizing the cytoplasmic portion of the dense bodies in cooperation with alpha-actinin. These results suggest that kettin is an important regulator of myofibrillar organization and provides mechanical stability to the myofibrils during contraction.     

Nonlinear dependence of actin-activated Mg2+-ATPase activity on the extent of phosphorylation of gizzard myosin and H-meromyosin

1. The actin-activated Mg2+-ATPase activity of gizzard HMM increased in proportion to the square of the extent of LC phosphorylation. This result indicates that the LCs of HMM are randomly phosphorylated, and the phosphorylation of both heads of HMM is required for the activation of HMM Mg2+-ATPase by F-actin. 2. In 75 mM KCl, the Mg2+-ATPase activity of gizzard myosin was activated by F-actin only slightly when a half of the total LC was phosphorylated. From 1 to 2 mol LC phosphorylation, the activity was enhanced by F-actin almost linearly. In 30 mM KCl, the activity of acto-gizzard myosin increased sigmoidally with increase in the extent of LC phosphorylation. On electron microscopy, side-by-side aggregates of myosin filaments were observed in 30 mM KCl, but not in 75 mM KCl. It was suggested that the activation of the Mg2+-ATPase activity of acto-gizzard myosin LC phosphorylation is modified by formation of myosin filaments and their aggregates. 3. The relationship between the actin-activated Mg2+-ATPase activity of HMM or myosin and the extent of LC phosphorylation was unaffected by tropomyosin.     

ATP-dependent movement of myosin in vitro: characterization of a quantitative assay

Sheetz and Spudich (1983, Nature (Lond.), 303:31-35) showed that ATP- dependent movement of myosin along actin filaments can be measured in vitro using myosin-coated beads and oriented actin cables from Nitella. To establish this in vitro movement as a quantitative assay and to understand better the basis for the movement, we have defined the factors that affect the myosin-bead velocity. Beads coated with skeletal muscle myosin move at a rate of 2-6 micron/s, depending on the myosin preparation. This velocity is independent of myosin concentration on the bead surface for concentrations above a critical value (approximately 20 micrograms myosin/2.5 X 10(9) beads of 1 micron in diameter). Movement is optimal between pH 6.8 and 7.5, at KCl concentrations less than 70 mM, at ATP concentrations greater than 0.1 mM, and at Mg2+ concentrations between 2 and 6 mM. From the temperature dependence of bead velocity, we calculate activation energies of 90 kJ/mol below 22 degrees C and 40 kJ/mol above 22 degrees C. Different myosin species move at their own characteristic velocities, and these velocities are proportional to their actin-activated ATPase activities. Further, the velocities of beads coated with smooth or skeletal muscle myosin correlate well with the known in vivo rates of myosin movement along actin filaments in these muscles. This in vitro assay, therefore, provides a rapid, reproducible method for quantitating the ATP- dependent movement of myosin molecules on actin.     

The binding of myosin heads on heavy meromyosin and assembled myosin to actin in the presence of nucleotides. Measurements by the proteolytic rates method

The initial rates of tryptic digestion at the 50/20-kDa junction in myosin and myosin subfragment 1 were determined for the free proteins and their complexes with actin in the presence and absence of MgATP. The proteolytic reactions were carried out at 24 degrees C and under ionic strength conditions (mu) adjusted to 35, 60, and 130 mM. The percentages of myosin heads and myosin subfragment 1 bound to actin in the presence of MgATP were calculated from the rates of proteolysis for each set of digestion experiments. In all cases, the myosin heads in the synthetic filaments showed greater binding to actin than myosin subfragment 1. This binding difference was most prominent (3-fold) at mu = 130 mM. The binding of heavy meromyosin (HMM) to actin in the presence of MgADP was measured at 4 degrees C by ultracentrifugation and the proteolytic rates methods. Ultracentrifugation experiments determined the fraction of HMM molecules bound to actin in the presence of MgADP, whereas the proteolytic measurements yielded the information on the fraction of HMM heads bound to actin. Taken together, these measurements show that a significant fraction of HMM is bound to actin with only one head in the presence of MgADP under ionic conditions of 180 and 280 mM.     

Elastic behavior of connectin filaments during thick filament movement in activated skeletal muscle

Connectin (also called titin) is a huge, striated muscle protein that binds to thick filaments and links them to the Z-disc. Using an mAb that binds to connectin in the I-band region of the molecule, we studied the behavior of connectin in both relaxed and activated skinned rabbit psoas fibers by immunoelectron microscopy. In relaxed fibers, antibody binding is visualized as two extra striations per sarcomere arranged symmetrically about the M-line. These striations move away from both the nearest Z-disc and the thick filaments when the sarcomere is stretched, confirming the elastic behavior of connectin within the I- band of relaxed sarcomeres as previously observed by several investigators. When the fiber is activated, thick filaments in sarcomeres shorter than 2.8 microns tend to move from the center to the side of the sarcomere. This translocation of thick filaments within the sarcomere is accompanied by movement of the antibody label in the same direction. In that half-sarcomere in which the thick filaments move away from the Z-disc, the spacings between the Z-disc and the antibody and between the antibody and the thick filaments both increase. Conversely, on the side of the sarcomere in which the thick filaments move nearer to the Z-line, these spacings decrease. Regardless of whether I-band spacing is varied by stretch of a relaxed sarcomere or by active sliding of thick filaments within a sarcomere of constant length, the spacings between the Z-line and the antibody and between the antibody and the thick filaments increase with I-band length identically. These results indicate that the connectin filaments remain bound to the thick filaments in active fibers, and that the elastic properties of connectin are unaltered by calcium ions and cross-bridge activity.     

Anomalous binding of MgADP to myosin of skeletal muscle

Binding of adenosine diphosphate to skeletal muscle myosin was studied using a range of concentrations from 0 to 2 mM. Up to 0.2 mM adenosine diphosphate two equivalent and independent nucleotide binding sites were detected, characterized by the single association constant of 5 x 10(4)M(-1). At greater adenosine diphosphate concentrations a decreasing binding capacity was noticed, bound nucleotide being essentially approximately 0.1 mol/mol at a 1-2mM adenosine diphosphate concentration. We tentatively propose that nucleotides act indirectly on myosin by promoting the perturbation of the solvent, which is supported by the fact that polyphosphates are known powerful kosmotropes.