Tropomyosin-dependent filament formation by a polymerization-defective mutant yeast actin (V266G,L267G)

A major function of tropomyosin (TPM) in nonmuscle cells may be stabilization of F-actin by binding longitudinally along the actin filament axis. However, no clear evidence exists in vitro that TPM can significantly affect the critical concentration of actin. We previously made a polymerization-defective mutant actin, GG (V266G, L267G). This actin will not polymerize alone at 25 degrees C but will in the presence of phalloidin or beryllium fluoride. With beryllium fluoride, but not phalloidin, this polymerization rescue is cold-sensitive. We show here that GG-actin polymerizability was restored by cardiac tropomyosin and yeast TPM1 and TPM2 at 25 degrees C with rescue efficiency inversely proportional to TPM length (TPM2 > TPM1 > cardiac tropomyosin), indicating the importance of the ends in polymerization rescue. In the presence of TPM, the apparent critical concentration of actin is 5.5 microm, 10-15-fold higher than that of wild type actin but well below that of the GG-actin alone (>20 microm). Non N-acetylated TPMs did not rescue GG-actin polymerization. The TPMs did not prevent cold-induced depolymerization of GG F-actin. TPM-dependent GG-actin polymerization did not occur at temperatures below 20 degrees C. Polymerization rescue may depend initially on the capture of unstable GG-F-actin oligomers by the TPM, resulting in the strengthening of actin monomer-monomer contacts along the filament axis.     

Interaction in vivo and in vitro between the yeast fimbrin, SAC6P, and a polymerization-defective yeast actin (V266G and L267G)

A mutant yeast actin (GG) has decreased hydrophobicity in a subdomain 3/4 hydrophobic plug believed to be involved in a hydrophobic cross-strand "plug-pocket" interaction necessary for actin filament stability. This actin will not polymerize in vitro but is compatible with cell viability. We have assessed the ability of Sac6p, the yeast homologue of the actin filament stabilizing and bundling protein fimbrin, to restore polymerization in vitro and to facilitate GG-actin function in vivo. Sac6p rescues GG-actin polymerization at 25 degrees C but not at 4 degrees C. The actin polymerizes into bundles at room temperature with a fimbrin:actin molar ratio of 1:4. At this ratio, every actin monomer contacts a Sac6p actin binding domain. Following cold-induced depolymerization, actin/Sac6p mixtures repolymerize beginning at 15 degrees C instead of the 25 degrees C required for de novo assembly, because of the presence of residual actin-Sac6p nuclei. Generation of haploid Deltasac6/GG-actin cells from either diploid or haploid cells was unsuccessful. The facile isolation of cells with either mutation alone indicates a synthetic lethal relationship between this actin allele and the SAC6 gene. Sac6p may allow GG-actin function in vivo by stabilizing the actin in bundles thereby helping maintain sufficient levels of an otherwise destabilized actin monomer within the cell.     

Yeast actin with a mutation in the "hydrophobic plug" between subdomains 3 and 4 (L266D) displays a cold-sensitive polymerization defect

Holmes et al. (Holmes, K. C., D. Popp, W. Gebhard, and W. Kabsch. 1990. Nature [Lond.] 347: 44-49) hypothesized that between subdomains 3 and 4 of actin is a loop of 10 amino acids including a four residue hydrophobic plug that inserts into a hydrophobic pocket formed by two adjacent monomers on the opposing strand thereby stabilizing the F- actin helix. To test this hypothesis we created a mutant yeast actin (L266D) by substituting Asp for Leu266 in the plug to disrupt this postulated hydrophobic interaction. Haploid cells expressing only this mutant actin were viable with no obvious altered phenotype at temperatures above 20 degrees C but were moderately cold-sensitive for growth compared with wild-type cells. The critical concentration for polymerization increased 10-fold at 4 degrees C compared with wild-type actin. The length of the nucleation phase of polymerization increased as the temperature decreased. At 4 degrees C nucleation was barely detectable. Addition of phalloidin-stabilized F-actin nuclei and phalloidin restored L266D actin''s ability to polymerize at 4 degrees C. This mutation also affects the overall rate of elongation during polymerization. Small effects of the mutation were observed on the exchange rate of ATP from G-actin, the G-actin intrinsic ATPase activity, and the activation of myosin S1 ATPase activity. Circular dichroism measurements showed a 15 degrees C decrease in melting temperature for the mutant actin from 57 degrees C to 42 degrees C. Our results are consistent with the model of Holmes et al. (Holmes, K. C., D. Popp, W. Gebhard, and W. Kabsch. 1990. Nature [Lond.]. 347:44-49) involving the role of the hydrophobic plug in actin filament stabilization.     

Bulkiness or aromatic nature of tyrosine-143 of actin is important for the weak binding between F-actin and myosin-ADP-phosphate

Actin filaments (F-actin) interact with myosin and activate its ATPase to support force generation. By comparing crystal structures of G-actin and the quasi-atomic model of F-actin based on high-resolution cryo-electron microscopy, the tyrosine-143 was found to be exposed more than 60 Å² to the solvent in F-actin. Because tyrosine-143 flanks the hydrophobic cleft near the hydrophobic helix that binds to myosin, the mutant actins, of which the tyrosine-143 was replaced with tryptophan, phenylalanine, or isoleucine, were generated using the Dictyostelium expression system. It polymerized significantly poorly when induced by NaCl, but almost normally by KCl. In the presence of phalloidin and KCl, the extents of the polymerization of all the mutant actins were comparable to that of the wild-type actin so that the actin-activated myosin ATPase activity could be reliably compared. The affinity of skeletal heavy meromyosin to F-actin and the maximum ATPase activity (V_max) were estimated by a double reciprocal plot. The Tyr143Trp-actin showed the higher affinity (smaller K_app) than that of the wild-type actin, with the V_max being almost unchanged. The K_app and V_max of the Tyr143Phe-actin were similar to those of the wild-type actin. However, the activation by Tyr143Ile-actin was much smaller than the wild-type actin and the accurate determination of K_app was difficult. Comparison of the myosin ATPase activated by the various mutant actins at the same concentration of F-actin showed that the extent of activation correlates well with the solvent-accessible surface areas (ASA) of the replaced amino acid molecule. Because 1/K_app reflects the affinity of F-actin for the myosin–ADP-phosphate intermediate (M.ADP.Pi) through the weak binding, these data suggest that the bulkiness or the aromatic nature of the tyrosin-143 is important for the initial binding of the M.ADP.Pi intermediate with F-actin but not for later processes such as the phosphate release.     

Motor function and regulation of myosin X.

Myosin X is a member of the diverse myosin superfamily that is ubiquitously expressed in various mammalian tissues. Although its association with actin in cells has been shown, little is known about its biochemical and mechanoenzymatic function at the molecular level. We expressed bovine myosin X containing the entire head, neck, and coiled-coil domain and purified bovine myosin X in Sf9 cells. The Mg(2+)-ATPase activity of myosin X was significantly activated by actin with low K(ATP). The actin-activated ATPase activity was reduced at Ca(2+) concentrations above pCa 5 in which 1 mol of calmodulin light chain dissociates from the heavy chain. Myosin X translocates F-actin filaments with the velocity of 0.3 microm/s with the direction toward the barbed end. The actin translocating activity was inhibited at concentrations of Ca(2+) at pCa 6 in which no calmodulin dissociation takes place, suggesting that the calmodulin dissociation is not required for the inhibition of the motility. Unlike class V myosin, which shows a high affinity for F-actin in the presence of ATP, the K(actin) of the myosin X ATPase was much higher than that of myosin V. Consistently nearly all actin dissociated from myosin X in the presence of ATP. ADP did not significantly inhibit the actin-activated ATPase activity of myosin X, suggesting that the ADP release step is not rate-limiting. These results suggest that myosin X is a nonprocessive motor. Consistently myosin X failed to support the actin translocation at low density in an in vitro motility assay where myosin V, a processive motor, supports the actin filament movement.     

Early disruption of the actin cytoskeleton in cultured cerebellar granule neurons exposed to 3-morpholinosydnonimine-oxidative stress is linked to alterations of the cytosolic calcium concentration

Cytoskeleton damage is a frequent feature in neuronal cell death and one of the early events in oxidant-induced cell injury. This work addresses whether actin cytoskeleton reorganization is an early event of SIN-1-induced extracellular nitrosative/oxidative stress in cultured cerebellar granule neurons (CGN). The actin polymerization state, i.e. the relative levels of G-/F-actin, was quantitatively assessed by the ratio of the fluorescence intensities of microscopy images obtained from CGN double-labelled with Alexa594-DNase-I (for actin monomers) and Bodipy-FL-phallacidin (for actin filaments). Exposure of CGN to a flux of peroxynitrite as low as 0.5-1μM/min during 30min (achieved with 0.1mM SIN-1) was found to promote alterations of the actin cytoskeleton dynamics as it increases the G-actin/F-actin ratio. Because L-type voltage-operated Ca(2+) channels (L-VOCC) are primary targets in CGN exposed to SIN-1, the possible role of Ca(2+) dynamics on the perturbation of the actin cytoskeleton was also assessed from the cytosolic Ca(2+) concentration response to the L-VOCC's agonist FPL-64176 and to the L-VOCC's blocker nifedipine. The results showed that SIN-1 induced changes in the actin polymerization state correlated with its ability to decrease Ca(2+) influx through L-VOCC. Combined analysis of cytosolic Ca(2+) concentration and G-actin/F-actin ratio alterations by SIN-1, cytochalasin D, latrunculin B and jasplakinolide support that disruption of the actin cytoskeleton is linked to cytosolic calcium concentration changes.     

Dual effect of Ca2+ on ultrasonic ATPase activity and polymerization of muscle actin.

Millimolar concentrations of Ca2+ stimulate actin polymerization whereas micromolar concentrations of Ca2+ depress polymerization. This latter effect leads to a reduction of ATPase (ATP phosphohydrolase, EC 3.6.1.3) activity of actin during sonication at low Mg2+ concentrations and in the absence of KCl. In the presence of KCl (90 mM) there is activation of ATPase activity by micromolar Ca2+ concentrations. These Ca2+ effects are half-maximal at a Ca2+ concentration of 2-10(-7) M. They can be explained by assuming that that ATPase activity is optimal in a medium range of actin polymer stability and that micromolar Ca2+ concentrations tend to labilize and depolymerize F-actin.     

Structural basis for the destabilization of F-actin by phosphate release following ATP hydrolysis.

The role of ATP hydrolysis in actin polymerization has been a puzzle, since it is known that polymer formation is possible without the ATPase activity and that the ATPase lags behind polymerization. We have used beryllium fluoride and G-ADP actin monomers to form F-ADP-BeF3- filaments that are a stable analog for either the ATP or the ADP-P(i) state. Electron microscopy and computed three-dimensional reconstruction have been used to compare this state to control actin, F-ADP, polymerized from G-ATP. We find, at a high degree of statistical significance, that subdomain-2 of the actin protomer in the ADP-BeF3- state is in a conformation very similar to that found in the atomic model for F-actin of Holmes and co-workers, but becomes disordered after the release of the phosphate. This breaks one of the longitudinal bonds in the filament, consistent with biochemical observations that phosphate release destabilizes F-actin. We have also found that lithium, which reduces the dissociation rate constant of actin filaments, induces a structural state indistinguishable from that of ADP-BeF3-. Further, in all states about ten C-terminal residues are displaced from the above mentioned model, but that the fit of the rest of the monomer is in excellent agreement, supporting the uniqueness of the solution they found and precluding a significantly different arrangement of the actin monomer in the filament.     

Effect of cytochalasin B on formation and properties of muscle F-actin.

Cytochalasin B stimulated polymerization and decreased the concentration of G-actin remaining in equilibrium with F-actin filaments. Polymerization in the presence of cytochalasin B gave rise to a smaller increase of viscosity but to the same increase in light scattering, compared to polymerization in the absence of cytochalasin B. Cytochalasin B reduced the viscosity of F-actin and caused the appearance of ATP hydrolysis by F-actin. The cytochalasin B-induced ATPase activity was inhibited by concentrations of KCl higher than 50 mM. The cytochalasin B-induced ATPase activity was enhanced by ethyleneglycol bis(alpha-aminoethyl ether)-N,N'-tetraacetic acid and reduced by MgCl2 at concentrations higher than 0.75 mM. The findings suggest that the stability of actin filaments is reduced by cytochalasin B.     

Purification and characterization of aginactin, a newly identified agonist-regulated actin-capping protein from Dictyostelium amoebae.

Amoeboid chemotaxis involves a regulated increase in actin nucleation activity that is correlated with an increase in actin polymerization occurring seconds after chemotactic stimulation (Carson, M., Weber, A., and Zigmond, S. H. (1986) J. Cell Biol. 103, 2707-2714; Hall, A. L., Warren, V., Dharmawardhane, S., and Condeelis, J. (1989) J. Cell Biol. 109, 2207-2213). We report the isolation and characterization of an agonist-regulated capping protein, aginactin, from Dictyostelium that may regulate these changes in actin nucleation activity. Aginactin is isolated from low speed supernatants of starved amoebae by sequential anion exchange, hydrophobic interaction, fast protein liquid chromatography anion exchange, and hydroxyapatite chromatography. Aginactin migrates with an apparent molecular weight of 70,000 on sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels and gel filtration columns, suggesting that it is a globular monomer. Aginactin is a barbed-end capping protein by several criteria. It inhibits the rate and final extent of actin polymerization and increases the apparent critical concentration at substoichiometric ratios to actin. It also inhibits depolymerization of F-actin and inhibits polymerization at the barbed end of Limulus acrosomal bundles. Aginactin is unaffected by micromolar Ca2+, and it neither severs F-actin nor nucleates actin polymerization in either the presence or absence of Ca2+. Aginactin binds to and cosediments with F-actin and has an apparent Kd for capping F-actin of 2.7 nM.     

The regulation of actin polymerization and the inhibition of monomeric actin ATPase activity by Acanthamoeba profilin

Profilin inhibits the rate of nucleation of actin polymerization and the rate of filament elongation and also reduces the concentration of F-actin at steady state. Addition of profilin to solutions of F-actin causes depolymerization. The same steady state concentrations of polymerized and nonpolymerized actin are reached whether profilin is added before initiation of polymerization or after polymerization is complete. The KD for formation of the 1:1 complex between Acanthamoeba profilin and Acanthamoeba actin is in the range of 4 to 11 microM; the KD for the reaction between Acanthamoeba profilin and rabbit skeletal muscle actin is about 60 to 80 microM, irrespective of the concentrations of KCl or MgCl2. The critical concentration of actin for polymerization and the KD for the actin-profilin interaction are independent of each other; therefore, a change in the critical concentration of actin alters the amount of actin bound to profilin at steady state. As a consequence, the presence of profilin greatly amplifies the effects of small changes in the actin critical concentration on the concentration of F-actin. Profilin also inhibits the ATPase activity of monomeric actin, the profilin-actin complex being entirely inactive.     

Expression of a nonpolymerizable actin mutant in Sf9 cells

We have succeeded in expressing actin in the baculovirus/Sf9 cell system in high yield. The wild-type (WT) actin is functionally indistinguishable from tissue-purified actin in its ability to activate ATPase activity and to support movement in an in vitro motility assay. Having achieved this feat, we used a mutational strategy to express a monomeric actin that is incapable of polymerization. Native actin requires actin binding proteins or chemical modification to maintain it in a monomeric state. The mutant actin sediments in the analytical ultracentrifuge as a homogeneous monomeric species of 3.2 S in 100 mM KCl and 2 mM MgCl(2), conditions that cause WT actin to polymerize. The two point mutations that render actin nonpolymerizable are in subdomain 4 (A204E/P243K; "AP-actin"), distant from the myosin binding site. AP-actin binds to skeletal myosin subfragment 1 (S1) and forms a homogeneous complex as demonstrated by analytical ultracentrifugation. The ATPase activity of a cross-linked AP-actin.S1 complex is higher than that of S1 alone, although less than that supported by filamentous actin (F-actin). AP-Actin is an excellent candidate for structural studies of complexes of actin with motor proteins and other actin-binding proteins.     

Cap100, a novel phosphatidylinositol 4,5-bisphosphate-regulated protein that caps actin filaments but does not nucleate actin assembly.

The fast and transient polymerization of actin in nonmuscle cells after stimulation with chemoattractants requires strong nucleation activities but also components that inhibit this process in resting cells. In this paper, we describe the purification and characterization of a new actin-binding protein from Dictyostelium discoideum that exhibited strong F-actin capping activity but did not nucleate actin assembly independently of the Ca2+ concentration. These properties led at physiological salt conditions to an inhibition of actin polymerization at a molar ratio of capping protein to actin below 1:1,000. The protein is a monomer, with a molecular mass of approximately 100 kDa, and is present in growing and in developing amoebae. Based on its F-actin capping function and its apparent molecular weight, we designated this monomeric protein cap100. As shown by dilution-induced depolymerization and by elongation assays, cap100 capped the barbed ends of actin filaments and did not sever F-actin. In agreement with its capping activity, cap100 increased the critical concentration for actin polymerization. In excitation or emission scans of pyrene-labeled G-actin, the fluorescence was increased in the presence of cap100. This suggests a G-actin binding activity for cap100. The capping activity could be completely inhibited by phosphatidylinositol 4,5-bisphosphate (PIP2), and bound cap100 could be removed by PIP2. The inhibition by phosphatidylinositol and the Ca(2+)-independent down-regulation of spontaneous actin polymerization indicate that cap100 plays a role in balancing the G- and F-actin pools of a resting cell. In the cytoplasm, the equilibrium would be shifted towards G-actin, but, below the membrane where F-actin is required, this activity would be inhibited by PIP2.     

Drebrin-induced Stabilization of Actin Filaments

Drebrin is a mammalian neuronal protein that binds to and organizes filamentous actin (F-actin) in dendritic spines, the receptive regions of most excitatory synapses that play a crucial role in higher brain functions. Here, the structural effects of drebrin on F-actin were examined in solution. Depolymerization and differential scanning calorimetry assays show that F-actin is stabilized by the binding of drebrin. Drebrin inhibits depolymerization mainly at the barbed end of F-actin. Full-length drebrin and its C-terminal truncated constructs were used to clarify the domain requirements for these effects. The actin binding domain of drebrin decreases the intrastrand disulfide cross-linking of Cys-41 (in the DNase I binding loop) to Cys-374 (C-terminal) but increases the interstrand disulfide cross-linking of Cys-265 (hydrophobic loop) to Cys-374 in the yeast mutants Q41C and S265C, respectively. We also demonstrate, using solution biochemistry methods and EM, the rescue of filament formation by drebrin in different cases of longitudinal interprotomer contact perturbation: the T203C/C374S yeast actin mutant and grimelysin-cleaved skeletal actin (between Gly-42 and Val-43). Additionally, we show that drebrin rescues the polymerization of V266G/L267G, a hydrophobic loop yeast actin mutant with an impaired lateral interface formation between the two filament strands. Overall, our data suggest that drebrin stabilizes actin filaments through its effect on their interstrand and intrastrand contacts.     

Interaction of maleimidobenzoyl actin with myosin subfragment 1 and tropomyosin-troponin.

A chemical modification of G-actin with (m-maleimidobenzoyl)-N-hydroxysuccinimide ester (MBS) impairs actin polymerization [Bettache, N., Bertrand, R., & Kassab, R. (1989) Proc. Natl. Acad. Sci. U.S.A. 86, 6028-6032]. MBS-actin recovers the ability to polymerize when a 2-fold molar excess of phalloidin is added in 30 mM KCl/2 mM MgCl2/20 mM Tris-HCl (pH 7.6). The resulting polymer (MBS-P-actin) is highly potentiated so that it activates the Mg(2+)-ATPase of S1 more strongly than native F-actin. The affinity of MBS-P-actin for S1 in the presence of ATP (KATPase) is about four times higher than that of native F-actin, although the maximum velocity at infinite actin concentration (Vmax) is almost the same. This high activation is not due to a cross-linking between MBS-P-actin and the S1 heavy chain, since no substantial amount of cross-linking was observed in SDS gel electrophoresis. Direct binding studies and ATPase measurements showed that the modification of actin with MBS impairs the binding of tropomyosin. Tropomyosin binding can be improved considerably by the addition of troponin. However, the regulation mechanism of the acto-S1 ATPase activity by troponin-tropomyosin is damaged. The addition of troponin-tropomyosin reduces the S1 ATPase activation by MBS-P-actin to the same level as that of native F-actin in 30 mM KCl/2.5 mM ATP/2 mM MgCl2, but there is no difference in the ATPase activation in the presence and absence of Ca2+.(ABSTRACT TRUNCATED AT 250 WORDS)     

Primary granule exocytosis in human neutrophils is regulated by Rac-dependent actin remodeling

The actin cytoskeleton regulates exocytosis in all secretory cells. In neutrophils, Rac2 GTPase has been shown to control primary (azurophilic) granule exocytosis. In this report, we propose that Rac2 is required for actin cytoskeletal remodeling to promote primary granule exocytosis. Treatment of neutrophils with low doses (< or = 10 microM) of the actin-depolymerizing drugs latrunculin B (Lat B) or cytochalasin B (CB) enhanced both formyl peptide receptor- and Ca(2+) ionophore-stimulated exocytosis. Higher concentrations of CB or Lat B, or stabilization of F-actin with jasplakinolide (JP), inhibited primary granule exocytosis measured as myeloperoxidase release but did not affect secondary granule exocytosis determined by lactoferrin release. These results suggest an obligatory role for F-actin disassembly before primary granule exocytosis. However, lysates from secretagogue-stimulated neutrophils showed enhanced actin polymerization activity in vitro. Microscopic analysis showed that resting neutrophils contain significant cortical F-actin, which was redistributed to sites of primary granule translocation when stimulated. Exocytosis and actin remodeling was highly polarized when cells were primed with CB; however, polarization was reduced by Lat B preincubation, and both polarization and exocytosis were blocked when F-actin was stabilized with JP. Treatment of cells with the small molecule Rac inhibitor NSC23766 also inhibited actin remodeling and primary granule exocytosis induced by Lat B/fMLF or CB/fMLF, but not by Ca(2+) ionophore. Therefore, we propose a role for F-actin depolymerization at the cell cortex coupled with Rac-dependent F-actin polymerization in the cell cytoplasm to promote primary granule exocytosis.     

Signalling mechanisms in the regulation of vacuolar ion release in guard cells

Pharmacological agents were used to investigate the possible involvement of actin in signalling chains associated with abscisic acid (ABA)-induced ion release from the guard cell vacuole, a process which is absolutely essential for stomatal closure. Effects on the ABA-induced transient stimulation of tonoplast efflux were measured, using (86)Rb in isolated guard cells of Commelina communis, together with effects on stomatal apertures. In the response to 10 microm ABA (triggered by Ca(2+) influx rather than internal Ca(2+) release), jasplakinolide (stabilizing actin filaments) and latrunculin B (depolymerizing actin filaments) had opposite effects. Both closure and the vacuolar efflux transient were inhibited by jasplakinolide but enhanced by latrunculin B. At 10 microm ABA prevention of mitogen-activated protein (MAP) kinase activation by PD98059 partially inhibited closure and reduced the efflux transient. By contrast, latrunculin B inhibited the efflux transient at 0.1 microm ABA (involving internal Ca(2+) release rather than Ca(2+) influx). The results suggest that 10 microm ABA activates Ca(2+)-dependent vacuolar ion efflux via a Ca(2+)-permeable influx channel which is maintained closed by interaction with F-actin. A MAP kinase is also involved, in a chain similar to that postulated for Ca(2+)-dependent gene expression in cold acclimation.     

Novel PKCα-mediated phosphorylation site(s) on cofilin and their potential role in terminating histamine release

Using specific inhibitors, kinase-negative mutants, and small interfering RNA against protein kinase Cα (PKCα) or PKCβI, we find that PKCβI positively regulates degranulation in rat basophilic leukemia-2H3 cells, whereas PKCα negatively regulates degranulation. Mass spectrometric and mutagenic analyses reveal that PKCα phosphorylates cofilin at Ser-23 and/or Ser-24 during degranulation. Overexpression of a nonphosphorylatable form (S23,24A), but not that of a mutant-mimicking phosphorylated form (S23,24E), increases degranulation. Furthermore, the S23,24A mutant binds to F-actin and retains its depolymerizing and/or cleavage activity; conversely, the S23,24E mutant is unable to sever actin filaments, resulting in F-actin polymerization. In addition, the S23,24E mutant preferentially binds to the 14-3-3ζ protein. Fluorescence-activated cell sorting analysis with fluorescein isothiocyanate-phalloidin and simultaneous observation of degranulation, PKC translocation, and actin polymerization reveals that during degranulation, actin polymerization is dependent on PKCα activity. These results indicate that a novel PKCα-mediated phosphorylation event regulates cofilin by inhibiting its ability to depolymerize F-actin and bind to 14-3-3ζ, thereby promoting F-actin polymerization, which is necessary for cessation of degranulation.     

Germinal center-specific protein human germinal center associated lymphoma directly interacts with both myosin and actin and increases the binding of myosin to actin

Human germinal center associated lymphoma (HGAL) is a germinal center-specific gene whose expression correlates with a favorable prognosis in patients with diffuse large B-cell and classic Hodgkin lymphomas. HGAL is involved in negative regulation of lymphocyte motility. The movement of lymphocytes is directly driven by actin polymerization and actin-myosin interactions. We demonstrate that HGAL interacts directly and independently with both actin and myosin and delineate the HGAL and myosin domains responsible for the interaction. Furthermore, we show that HGAL increases the binding of myosin to F-actin and inhibits the ability of myosin to translocate actin by reducing the maximal velocity of myosin head/actin movement. No effects of HGAL on actomyosin ATPase activity and the rate of actin polymerization from G-actin to F-actin were observed. These findings reveal a new mechanism underlying the inhibitory effects of germinal center-specific HGAL protein on lymphocyte and lymphoma cell motility.     

High affinity binding of brain myosin-Va to F-actin induced by calcium in the presence of ATP

Brain myosin-Va consists of two heavy chains, each containing a neck domain with six tandem IQ motifs that bind four to five calmodulins and one to two essential light chains. Previous studies demonstrated that myosin-Va exhibits an unusually high affinity for F-actin in the presence of ATP and that its MgATPase activity is stimulated by micromolar Ca(2+) in a highly cooperative manner. We demonstrate here that Ca(2+) also induces myosin-Va binding to and cosedimentation with F-actin in the presence of ATP in a similar cooperative manner and calcium concentration range as that observed for the ATPase activity. Neither hydrolysis of ATP nor buildup of ADP was required for Ca(2+)-induced cosedimentation. The Ca(2+)-induced binding was inhibited by low temperature or by 0.6 m NaCl, but not by 1% Triton X-100. Tight binding between myosin-Va and pyrene-labeled F-actin in the presence of ATP and Ca(2+) was also detected by quenching of the pyrene fluorescence. Negatively stained preparations of actomyosin-Va under Ca(2+)-induced binding conditions showed tightly packed F-actin bundles cross-linked by myosin-Va. Our data demonstrate that high affinity binding of myosin-Va and F-actin in the presence of ATP or 5'-O-(thiotriphosphate) is induced by micromolar concentrations of Ca(2+). Since Ca(2+) regulates both the actin binding properties and actin-activated ATPase of myosin-Va over the same concentration range, we suggest that the calcium signal may regulate the mechanism of processivity of myosin Va.