Fabrication and Evaluation of Nanostructured Herbal Oil/Hydroxypropyl-β-Cyclodextrin/Polyvinylpyrrolidone Mats for Denture Stomatitis Prevention and Treatment

This work aims to develop the herbal oil-incorporated nanostructure mats with antifungal activity for the prevention and treatment of Candida-associated denture stomatitis. The nanofiber mats loaded with betel oil or clove oil were fabricated via electrospinning process. The morphologies and physicochemical properties of the herbal oil loaded nanofiber mats were examined using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and mechanical testing. The release characteristic, antifungal activity, and cytotoxicity were also investigated. The SEM images confirmed the homogeneous and smooth nanoscale fibers. The addition of the herbal oil into the nanofiber mats reduced the fiber diameters. The DSC and FT-IR results confirmed the presence of the oil in the nanofiber mats. The herbal oils can be released from the mats in a very fast manner and inhibit the growth of candida cells within only few minutes after contact. These nanofiber mats may be beneficial for the prevention and treatment of denture stomatitis.     

Effect of citric acid and processing on the performance of thermoplastic starch/montmorillonite nanocomposites

A facile two steps extrusion processing conditions are used to prepare thermoplastic starch (TPS)/glycerol modified-montmorillonite (GMMT) nanocomposites. X-ray diffraction (XRD) and transmission electron microscopy (TEM) demonstrate glycerol can enlarge the d-spacing and destruct the multilayer structure of montmorillonite (MMT) effectively using high speed emulsifying machine (HSEM) in the first modification step. So the enlarged d-spacing and destructed platelets of MMT are favorable to form intercalated or exfoliated TPS/GMMT nanocomposites in the second melt extrusion processing. However, scanning electron microscopy (SEM) and XRD show the possible competition between TPS matrix and plasticizer for the intercalation between MMT layers can deteriorate the plasticization of TPS. In addition, citric acid (CA) can increase the plasticization of TPS and dispersion of MMT in nanocomposites effectively detected by fourier transform infrared (FT-IR) spectroscopy and SEM. At the same time, this facile processing conditions and CA can improve the mechanical properties and water vapor permeability (WVP) of TPS/GMMT nanocomposites obviously.     

Injection molded thermoplastic starch/natural rubber/clay nanocomposites: Morphology and mechanical properties

Unmodified and modified natural rubber latex (uNRL and mNRL) were used to prepare thermoplastic starch/natural rubber/montmorillonite type clay (TPS/NR/Na⁺-MMT) nanocomposites by twin-screw extrusion. After being dried, the nanocomposites were injection molded to produce test specimens. Scanning electron micrographs of fractured samples revealed that chemical modification of NRL enhanced the interfacial adhesion between NR and TPS; improving their dispersion. X-ray diffraction (XRD) showed that the nanocomposites exhibited partially intercalated/exfoliated structures. Surprisingly, transmission electron microscopy (TEM) showed that clay nanoparticles were preferentially intercalated into the rubber phase. Elastic modulus and tensile strength of TPS/NR blends were dramatically improved from 1.5 to 43 MPa and from 0.03 to 1.5 MPa, respectively, as a result of rubber modification. Properties of blends were almost unaffected by the dispersion of the clay except for the TPS/mNR blend loading 2% MMT. This was attributed to the exfoliation of the MMT.     

Nanofibers from blends of polyvinyl alcohol and polyhydroxy butyrate as potential scaffold material for tissue engineering of skin

Nanofibers were prepared by electrospinning from pure polyvinyl alcohol (PVA), polyhydroxybutyrate (PHB), and their blends. Miscibility and morphology of both polymers in the nanofiber blends were studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC), revealing that PVA and PHB were miscible with good compatibility. DSC also revealed suppression of crystallinity of PHB in the blend nanofibers with increasing proportion of PVA. The hydrolytic degradation of PHB was accelerated with increasing PVA fraction. Cell culture experiments with a human keratinocyte cell line (HaCaT) and dermal fibroblast on the electrospun PHB and PVA/PHB blend nanofibers showed maximum adhesion and proliferation on pure PHB. However, the addition of 5 wt % PVA to PHB inhibited growth of HaCaT cells but not of fibroblasts. On the contrary, adhesion and proliferation of HaCaT cells were promoted on PVA/PHB (50/50) fibers, which inhibited growth of fibroblasts.     

Electrospun water-soluble carboxyethyl chitosan/poly(vinyl alcohol) nanofibrous membrane as potential wound dressing for skin regeneration

Biocompatible carboxyethyl chitosan/poly(vinyl alcohol) (CECS/PVA) nanofibers were successfully prepared by electrospinning of aqueous CECS/PVA solution. The composite nanofibrous membranes were subjected to detailed analysis by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). SEM images showed that the morphology and diameter of the nanofibers were mainly affected by the weight ratio of CECS/PVA. XRD and DSC demonstrated that there was strong intermolecular hydrogen bonding between the molecules of CECS and PVA. The crystalline microstructure of the electrospun fibers was not well developed. The potential use of the CECS/PVA electrospun fiber mats as scaffolding materials for skin regeneration was evaluated in vitro using mouse fibroblasts (L929) as reference cell lines. Indirect cytotoxicity assessment of the fiber mats indicated that the CECS/PVA electrospun mat was nontoxic to the L929 cell. Cell culture results showed that fibrous mats were good in promoting the cell attachment and proliferation. This novel electrospun matrix would be used as potential wound dressing for skin regeneration.     

Thermal properties and flammability of polylactide nanocomposites with aluminum trihydrate and organoclay

Biodegradable polylactide (PLA) nanocomposites with aluminum trihydrate (ATH) and modified montmorillonite (MMT) were prepared via direct melt compounding using a twin-screw micro extruder. The exfoliated and intercalated structures of clay in the matrix were observed by TEM and XRD. The thermal oxidative degradation temperature and activation energy of the PLA/ATH/MMT nanocomposite determined by thermogravimetric analysis are higher than that without addition of ATH and organoclay. The incorporation of layered silicates into the PLA/ATH composite results in further stabilization throughout the degradation step. The V-0 rating (UL94 V) of the PLA nanocomposite has been achieved, and the melt dripping was reduced during combustion. Results showed that high loading of the conventional flame retardant ATH yielded brittle PLA composites; however, replacing a portion of the ATH with modified MMT in the PLA matrix improved this result.     

Synthesis, thermal stability and photoluminescence of new cadmium sulfide/organic composite hollow sphere nanostructures

Novel cadmium sulfide/organic composite hollow spheres composed of sword-like nanorods were synthesized via a simple reaction between cadmium salts and thioglycolic acid (TGA) at room temperature. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SEAD) and Fourier transform infrared (FT-IR) spectra. Thermal stability of the organic composite was investigated. CdS/organic composite would decompose into pure wurtzite CdS through hydrothermal treatment. Effect of the cadmium source on the formation of the CdS/organic composite was investigated. Photoluminescence (PL) was used to study the optical properties of CdS/organic composite and pure CdS.     

Preparation and mechanical properties of chitosan/carbon nanotubes composites

Biopolymer chitosan/multiwalled carbon nanotubes (MWNTs) nanocomposites have been successfully prepared by a simple solution-evaporation method. The morphology and mechanical properties of the chitosan/MWNTs nanocomposites have been characterized with field emission scanning electron microscopy (SEM), bright field transmission electron microscopy (TEM), optical microscopy (OM), wide-angle X-ray diffraction (XRD), and tensile as well as nanoindentation tests. The MWNTs were observed to be homogeneously dispersed throughout the chitosan matrix. When compared with neat chitosan, the mechanical properties, including the tensile modulus and strength, of the nanocomposites are greatly improved by about 93% and 99%, respectively, with incorporation of only 0.8 wt % of MWNTs into the chitosan matrix.     

Biomimetic polysaccharide nanocomposites of high cellulose content and high toughness

Plant cell walls combine mechanical stiffness, strength and toughness despite a highly hydrated state. Inspired by this, a nanostructured cellulose network is combined with an almost viscous polysaccharide matrix in the form of a 50/50 amylopectin-glycerol blend. Homogeneous films with a microfibrillated cellulose (MFC) nanofiber content in the range of 10-70 wt % are successfully cast. Characterization is carried out by dynamic mechanical analysis, field-emission scanning electron microscopy, X-ray diffraction, and mercury density measurements. The MFC is well dispersed and predominantly oriented random-in-the-plane. High tensile strength is combined with high modulus and very high work of fracture in the nanocomposite with 70 wt % MFC. The reasons for this interesting combination of properties include nanofiber and matrix properties, favorable nanofiber-matrix interaction, good dispersion, and the ability of the MFC network to maintain its integrity to a strain of at least 8%.     

Adsorption and Desorption of Nickel(II) Ions from Aqueous Solution by a Lignocellulose/Montmorillonite Nanocomposite

A new and inexpensive lignocellulose/montmorillonite (LNC/MMT) nanocomposite was prepared by a chemical intercalation of LNC into MMT and was subsequently investigated as an adsorbent in batch systems for the adsorption-desorption of Ni(II) ions in an aqueous solution. The optimum conditions for the Ni(II) ion adsorption capacity of the LNC/MMT nanocomposite were studied in detail by varying parameters such as the initial Ni(II) concentration, the solution pH value, the adsorption temperature and time. The results indicated that the maximum adsorption capacity of Ni(II) reached 94.86 mg/g at an initial Ni(II) concentration of 0.0032 mol/L, a solution pH of 6.8, an adsorption temperature of 70°C, and adsorption time of 40 min. The represented adsorption kinetics model exhibited good agreement between the experimental data and the pseudo-second-order kinetic model. The Langmuir isotherm equation best fit the experimental data. The structure of the LNC/MMT nanocomposite was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), whereas the adsorption mechanism was discussed in combination with the results obtained from scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and Fourier-transform infrared spectroscopy analyses (FTIR). The desorption capacity of the LNC/MMT nanocomposite depended on parameters such as HNO₃ concentration, desorption temperature, and desorption time. The satisfactory desorption capacity of 81.34 mg/g was obtained at a HNO₃ concentration, desorption temperature, and desorption time of 0.2 mol/L, 60 ºC, and 30 min, respectively. The regeneration studies showed that the adsorption capacity of the LNC/MMT nanocomposite was consistent for five cycles without any appreciable loss in the batch process and confirmed that the LNC/MMT nanocomposite was reusable. The overall study revealed that the LNC/MMT nanocomposite functioned as an effective adsorbent in the detoxification of Ni(II)-contaminated wastewater.     

Interaction and properties of highly exfoliated soy protein/montmorillonite nanocomposites

The soy protein isolate (SPI)/ Na+ -montmorillonite (MMT) plastics were successfully prepared, and their structures and properties were characterized with X-ray diffraction, transmission electron microscopy, differential scanning calorimetry, thermogravimetric analysis, and tensile testing. The interactions between the soy protein macromolecules and MMT in aqueous media were analyzed with zeta-potential measurements, Fourier transform infrared spectroscopy, and electrostatic surface potential calculations. The results revealed that the heterogeneous distribution of the surface positive charges provided the positive-charge-rich domains for the soy globulins bearing net negative charges to anchor into the negatively charged MMT galleries. There were electrostatic attraction and hydrogen bonding interactions on the interfaces of the soy protein and MMT, which led to the good dispersion of the phyllosilicate layers in the protein matrix. The highly exfoliated MMT layers with a dimension of 1-2 nm in thickness were randomly dispersed in the protein matrix containing MMT lower than 12 wt %, whereas the intercalated structure was predominant when the MMT content was higher than 12 wt %. Consequently, the fine dispersion of the MMT layers and the strong interactions between SPI and MMT created the significant improvement of the mechanical strength and thermo-stability of the SPI/MMT plastics. In addition, a schematic illustration was proposed to describe the electrostatic interaction between SPI and MMT as well as the correlation between the interaction and structure in protein/clay systems.     

Fabrication and In Vitro/In Vivo Performance of Mucoadhesive Electrospun Nanofiber Mats Containing α-Mangostin

This study aimed to fabricate mucoadhesive electrospun nanofiber mats containing α-mangostin for the maintenance of oral hygiene and reduction of the bacterial growth that causes dental caries. Synthesized thiolated chitosan (CS-SH) blended with polyvinyl alcohol (PVA) was selected as the mucoadhesive polymer. α-Mangostin was incorporated into the CS-SH/PVA solution and electrospun to obtain nanofiber mats. Scanning electron microscopy, differential scanning calorimetry, X-ray diffraction, and tensile strength testing were used to characterize the mats. The swelling degree and mucoadhesion were also determined. The nanofiber mats were further evaluated regarding their α-mangostin content, in vitro α-mangostin release, antibacterial activity, cytotoxicity, in vivo performance, and stability. The results indicated that the mats were in the nanometer range. The α-mangostin was well incorporated into the mats, with an amorphous form. The mats showed suitable tensile strength, swelling, and mucoadhesive properties. The loading capacity increased when the initial amount of α-mangostin was increased. Rapid release of α-mangostin from the mats was achieved. Additionally, a fast bacterial killing rate occurred at the lowest concentration of nanofiber mats when α-mangostin was added to the mats. The mats were less cytotoxic after use for 72 h. Moreover, in vivo testing indicated that the mats could reduce the number of oral bacteria, with a good mouth feel. The mats maintained the amount of α-mangostin for 6 months. The results suggest that α-mangostin-loaded mucoadhesive electrospun nanofiber mats may be a promising material for oral care and the prevention of dental caries.KEY WORDS: dental caries, mucoadhesive property, nanofibers, thiolated chitosan, α-mangostin     

Coaxial electrospinning of (fluorescein isothiocyanate-conjugated bovine serum albumin)-encapsulated poly(epsilon-caprolactone) nanofibers for sustained release

As an aim toward developing biologically mimetic and functional nanofiber-based tissue engineering scaffolds, we demonstrated the encapsulation of a model protein, fluorescein isothiocyanate-conjugated bovine serum albumin (fitcBSA), along with a water-soluble polymer, poly(ethylene glycol) (PEG), within the biodegradable poly(epsilon-caprolactone) (PCL) nanofibers using a coaxial electrospinning technique. By variation of the inner flow rates from 0.2 to 0.6 mL/h with a constant outer flow rate of 1.8 mL/h, fitcBSA loadings of 0.85-2.17 mg/g of nanofibrous membranes were prepared. Variation of flow rates also resulted in increases of fiber sizes from ca. 270 nm to 380 nm. The encapsulation of fitcBSA/PEG within PCL was subsequently characterized by laser confocal scanning microscopy, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. In vitro release studies were conducted to evaluate sustained release potential of the core-sheath-structured composite nanofiber PCL-r-fitcBSA/PEG. As a negative control, composite nanofiber PCL/fitcBSA/PEG blend was prepared from a normal electrospinning method. It was found that core-sheath nanofibers PCL-r-fitcBSA/PEG pronouncedly alleviated the initial burst release for higher protein loading and gave better sustainability compared to that of PCL/fitcBSA/PEG nanofibers. The present study would provide a basis for further design and optimization of processing conditions to control the nanostructure of core-sheath composite nanofibers and ultimately achieve desired release kinetics of bioactive proteins (e.g., growth factors) for practical tissue engineering applications.     

Physicochemical and structural characteristics of chitosan nanopowders prepared by ultrafine milling

Two different molecular weights of chitosan were pulverized to nanopowders by ultrafine milling. The nanopowders were characterized by viscometry small angle X-ray scattering (SAXS), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), FT-IR spectroscopy and UV-vis spectroscopy. Our results showed that ultrafine milling effectively reduced the particle size of chitosan to a nanoscale. The viscosity average molecular weight (Mv) of chitosan was decreased by the milling treatment. The crystalline structure of chitosan was destroyed by the milling since the nanopowder exhibited an amorphous XRD pattern. In addition, thermal stability of the low molecular weight chitosan was decreased after the milling treatment. FT-IR and UV-vis spectra showed that the milling process did not cause significant changes in the chemical structure of chitosan.     

Synthesis and characterization of hydroxypropyl methylcellulose and ethyl acrylate graft copolymers

The synthesis of hydroxypropyl methylcellulose-g-poly (ethyl acrylate) was carried out by potassium persulfate induced graft copolymerization in homogeneous aqueous medium. By varying the reaction conditions, graft copolymers with different percentage of grafting were prepared. These graft copolymers were characterized by fourier transform infrared spectra (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetric analyses (TGA), X-ray diffraction analysis (XRD), and dynamic light scattering (DLS) methods. The molecular weight of grafted and ungrafted polymer chains determined by gel permeation chromatography (GPC) increased with increasing monomer and matrix concentration but decreased with increasing initiator concentration and reaction temperature. The mechanical properties of graft copolymers were measured as function of the percentage of grafting. In addition, the equilibrium humidity adsorption behavior and the disintegration time of the grafted copolymer films were also studied.     

Effect of adhesive on the morphology and mechanical properties of electrospun fibrous mat of cellulose acetate

Ultrafine fibers of cellulose acetate/poly(butyl acrylate) (CA/PBA) composite in which PBA acted as an adhesive and CA acted as a matrix, were successfully prepared as fibrous mat via electrospinning. The morphology observation from the electrospun CA/PBA composite fibers, after treatment with heat hardener, revealed that the fibers were cylindrical and had point-bonded structures. SEM, FT-IR spectra, Raman spectra, TGA analysis, and mechanical properties measurement were used to study the different properties of hybrid mats. The tensile strength of blend fibrous electrospun mats was found to be effectively increased. This resultant enhancement of the mechanical properties of polymer fibrous mats, caused by generating the point-bonded structures (due to adhesive), could increase the number of potential applications of mechanically weak electrospun CA fibers.     

Synthesis and characterization manganese oxide nanobundles from decomposition of manganese oxalate

The present investigation reports, the synthesis of manganese oxide (α-Mn₂O₃) nanobundles using thermal decomposition and its physicochemical characterization. The α-Mn₂O₃ nanobundles have been prepared using manganese oxalate dihydrate powders as precursor in the presence of oleylamine and triphenylphosphine as solvent and capping agent. Transmission electron microscopy (TEM) analysis demonstrated Mn₂O₃ nanobundles compose of nanospheres with diameter 30 nm. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy. Manganese oxide nanocrystals have been prepared under different condition. The controlled experimental results showed that the use of oleylamine and triphenylphosphine as the solvent and capping agent in the chemical process played important role in the formation of the final products.     

Electrospun PVA/HAp nanocomposite nanofibers: biomimetics of mineralized hard tissues at a lower level of complexity

Based on the biomimetic approaches the present work describes a straightforward technique to mimic not only the architecture (the morphology) but also the chemistry (the composition) of the lowest level of the hierarchical organization of bone. This technique uses an electrospinning (ES) process with polyvinyl alcohol (PVA) and hydroxyapatite (HAp) nanoparticles. To determine morphology, crystalline structures and thermal properties of the resulting electrospun fibers with the pure PVA and PVA/HAp nanocomposite (NC) before electrospinning various techniques were employed, including transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In addition, FT-IR spectroscopy was carried out to analyze the complex structural changes upon undergoing electrospinning as well as interactions between HAp and PVA. The morphological and crystallographic investigations revealed that the rod-like HAp nanoparticles exhibit a nanoporous morphology and are embedded within the electrospun fibers. A large number of HAp nanorods are preferentially oriented parallel to the longitudinal direction of the electrospun PVA fibers, which closely resemble the naturally mineralized hard tissues of bones. Due to abundant OH groups present in PVA and HAp nanorods, they strongly interact via hydrogen bonding within the electrospun PVA/HAp NC fibers, which results in improved thermal properties. The unique physiochemical features of the electrospun PVA/HAp NC nanofibers prepared by the ES process will open up a wide variety of future applications related to hard tissue replacement and regeneration (bone and dentin), not limited to coating implants.     

Electrospun chitosan-graft-poly (ε -caprolactone)/poly (ε-caprolactone) cationic nanofibrous mats as potential scaffolds for skin tissue engineering

This research is aimed to develop cationic nanofibrous mats with improved cellular adhesion profiles and stability of three-dimensional fibrous structure as potential scaffolds for skin tissue engineering. Firstly, amino-remained chitosan-graft-poly (?-caprolactone) (CS-g-PCL) was synthesized with a facile one-step manner by grafting ?-caprolactone oligomers onto the hydroxyl groups of CS via ring-opening polymerization by using methanesulfonic acid as solvent and catalyst. And then, CS-g-PCL/PCL nanofibrous mats were obtained by electrospinning of CS-g-PCL/PCL mixed solution. Scanning electron microscopy (SEM) images showed that the morphologies and diameters of the nanofibers were mainly affected by the weight ratio of CS-g-PCL to PCL. The enrichment of amino groups on the nanofiber surface was confirmed by X-ray photoelectron spectroscopy (XPS). With the increase of CS-g-PCL in CS-g-PCL/PCL nanofiber, the content of amino groups on the nanofiber surface increased, which resulted in the increase of zeta-potential of nanofibers. Studies on cell-scaffold interaction were carried out by culturing mouse fibroblast cells (L929) on CS-g-PCL/PCL nanofibrous mats with various contents of CS-g-PCL by assessing the growth, proliferation and morphologies of cells. The results of MTS assay and SEM observation showed that CS-g-PCL/PCL (2/8) mats with a moderate surface zeta-potential (ζ=3mV) were the best in promoting the cell attachment and proliferation. Toluidine blue staining further confirmed that L929 cells grew well and exhibited a normal morphology on the CS-g-PCL/PCL (2/8) mats. These results suggested the potential utilization of CS-g-PCL/PCL (2/8) nanofibrous mats for skin tissue engineering.     

Effect of incorporation of nano bioactive silica into commercial Glass Ionomer Cement (GIC)

Four types of bioactive nano-silica were prepared by different methods, and were used to improve commercial dental Glass Ionomer Cement (GIC) bioactivity. The prepared powder samples were characterized by X-ray diffraction (XRD) to identify the formed phase; particle size and morphology were assessed by transmission electron microscope (TEM). The bioactivity of the prepared powder samples and its dental cement blends were applied in simulated body fluid (SBF). The change in surface morphology and composition after soaking in SBF after week at 37 °C were determined by scanning electron microscopy with energy dispersive spectroscopy (SEM with EDS) and Fourier transform infrared analyses (FTIR). Our results confirmed that the prepared silica powder exists in nano-scale. Precipitations of carbonate–apatite on the silica surface were observed by FT-IR spectroscopy and scanning electron microscopy. Silica dissolution and re-precipitation phenomena were also observed from SEM. The relationship between both phenomena during the in vitro test is discussed mainly in terms of structural and microstructural features of the silica. Combination of bioactive nano-silica with dental cement improves its bioactivity, which may be helpful to overcome marginal gap formation which is major disadvantage of the commercial dental cement.