Removal of acetic acid and sulfuric acid from biomass hydrolyzate using a lime addition–capacitive deionization (CDI) hybrid process

In this study, we developed a lime addition–capacitive deionization (CDI) hybrid process that can efficiently remove acetic acid and sulfuric acid from the model mixture of glucose, xylose, acetic acid, and sulfuric acid, which are the major components from the biomass hydrolyzate by acid hydrolysis. The key parameters of lime addition process (type of lime, amount of lime, stirrer speed, and reaction time) and CDI process (voltage, flow rate, and feed concentration) were also optimized. In the lime addition process, the optimal lime type, (sulfuric acid + acetic acid)/lime molar ratio, stirrer speed, and reaction time for the removal of sulfuric acid were CaCO₃, 1:1, 200 rpm, and 6 min, respectively. For the CDI process, the optimal voltage and flow rate were 1.2 V and 20 mL/min, respectively. The efficiency of acid removal increased as the initial acetic acid concentration decreased. This hybrid process was able to remove 98.08% of sulfuric acid and 76.97% of acetic acid from the mixture of glucose, xylose, acetic acid, and sulfuric acid. The process was able to recover almost all sugar (>99%) at high purity (97.53%).     

Synthesis and PGE2 production inhibition of s-triazine derivatives as a novel scaffold in RAW 264.7 macrophage cells

We present the synthesis and biological evaluation of a collection of s-triazine derivatives as a novel scaffold of compounds with the capability to inhibit the PGE₂ production in LPS-induced RAW 264.7 macrophage cells. A total of 12 derivatives were synthesized and assayed for PGE₂ reduction at 10 μM concentration. Two compounds (7b and 7i) exhibiting >90% inhibition of PGE₂ production were found to have IC₅₀ values of 5.76 and 5.52 μM, respectively. They were counter screened for inhibition on COX-2 activity in a cell free assay. Specifically, compound 7i (R¹ = 4-Bn-Ph, R² = Cl, R³ = Ph, R⁵ = CO₂Me) was highly active in cells while maintaining little COX-2 inhibition (∼0% at 10 μM). Molecular docking study provides the possibility that compound 7i could inhibit PGE₂ production by blocking the PGH₂ binding site of mPGES-1 instead of COX-2 enzyme. Based on this result, our synthetic efforts will focus on intensive structure–activity relationship (SAR) study of s-triazine scaffold to discovery a potential PGE₂ synthesis inhibitor.     

Performance evaluation of constructed wetlands in a tropical region

Five emergent plant species were compared for their effectiveness in treating contaminants in a wetland system constructed on a military base in El Salvador. The system consisted of the subsurface flow (SSF), open water (OW) and free surface flow (SF) wetlands with a combined flow capacity of up to 151.4 m³ d^?1. Reliability and consistent performance in extreme conditions, such as those occurring during the tropical dry or wet seasons were important evaluation criteria. The discontinuous flow patterns typical of tropical climates necessitated the use of water balance calculations using climatic data such as rainfall and evapotranspiration. System characterization was achieved by computation of daily input and output mass loading rates for each individual constituent. Results suggest that Phragmites and Brachiaria were the most effective plants in SSF wetland. Brachiaria provided the added benefit of serving as a source of fodder and proved proficient, with N and P uptakes of 1.5–3.14% and 0.17–0.25% per dry plants’ biomass, respectively. Typha yielded the highest dry season removal efficiency within the SF (BOD₅: 80.78 ± 9.35%, COD: 65.18 ± 19.6%, TN: 58.59 ± 19.3%, oil and grease: 78.34 ± 10.55%, total dissolved phosphorus: 66.5 ± 20.7%). Phragmites–Typha treatment subset performed better year-round than either Thalia–Thalia or Brachiaria–Cyperus. Evaluated plants were capable of surviving and proliferating in extreme tropical climates.     

Optimization and modeling of lactose hydrolysis in a packed bed system using immobilized β-galactosidase from Aspergillus oryzae

This work studied the hydrolysis of lactose using β-galactosidase from Aspergillus oryzae immobilized with a combination of adsorption and glutaraldehyde cross-linking onto the ion exchange resin Duolite A568 as a carrier. A central composite design (CCD) was used to study the effects of lactose concentration and feed flow rate on the average hydrolysis reaction rate and lactose conversion in a fixed bed reactor operating continuously with an upflow at a temperature of 35 ± 1 °C. The optimal conditions for the average hydrolysis reaction rate and the lactose conversion included a lactose concentration of 50 g/L and a feed flow rate of 6 mL/min. The average reaction rate and conversion reached 2074 U and 65%, respectively. The immobilized enzyme activity was maintained during the 30 days of operation in a fixed bed reactor with a 0.3 mL/min feed flow rate of a 50 g/L lactose solution at room temperature. Feed flows ranging from 0.6 to 12 mL/min were used to determine the distribution of residence times and the kinetics of the fixed bed reactor. A non-ideal flow pattern with the formation of a bypass flow in the fixed bed reactor was identified. The conditions used for the kinetics study included a lactose solution concentration of 50 g/L at pH 4.5 and a temperature of 35 ± 1 °C. Kinetic models using a PFR and axial dispersion methods were used to describe the lactose hydrolysis in the fixed bed reactor, thus accounting for the competitive inhibition by galactose. To increase the lactose conversion, experiments were performed for two fixed bed reactors in series, operating in continuous duty with upflow, with the optimal conditions determined using the CCD for a fixed bed reactor. The total conversion for the two reactors in series was 82%.     

Validation and application of a liquid chromatography–tandem mass spectrometric method for quantification of the drug transport probe fexofenadine in human plasma using 96-well filter plates

A rapid method to determine fexofenadine concentrations in human plasma using protein precipitation in 96-well plates and liquid chromatography–tandem mass spectrometry was validated. Plasma proteins were precipitated with acetonitrile containing the internal standard fexofenadine-d6, mixed briefly, and then filtered into a collection plate. The resulting filtrate was diluted and injected onto a Phenomenex Gemini C18 (50 mm × 2.0 mm, 5 μm) analytical column. The mobile phase consisted of 0.1% formic acid, 5 mM ammonium acetate in deionized water and methanol (35:65, v/v). The flow rate was 0.2 ml/min and the total run time was 2 min. Detection of the analytes was achieved using positive ion electrospray ionization and high resolution multiple reaction monitoring mode (H-SRM). The linear standard curve ranged from 1 to 500 ng/ml and the precision and accuracy (intra- and inter-run) were within 4.3% and 8.0%, respectively. The method has been applied successfully to determine fexofenadine concentrations in human plasma samples obtained from subjects administered a single oral dose of fexofenadine. The method is rapid, sensitive, selective and directly applicable to human pharmacokinetic studies involving fexofenadine.     

Genetic variation in fertility of heat-stressed male mice

The damaging effects of heat stress on male fertility are evident in developing spermatozoa expressed in ejaculates 18–28 days post-stress in mice. Our objectives were to: (1) assess genetic variation in fertility of heat-stressed male mice and (2) determine response to selection for fertility after heat stress in male mice. Mature male mice were exposed to heat stress (35 ± 1 °C; n = 50) or control (21 ± 1 °C; n = 10) conditions for 24 h (day 0) and then hemicastrated for tissue collection. Two periods of mating tests followed, period 1 (from days 3 to 11) when no reductions in fertility were anticipated, and period 2 (days 18–26) when variation in fertility was expected. Period 2 pregnant females were sacrificed in late gestation. Males were indexed by multiplying overall mean ovulation rate by pre-implantation survival and number of pregnant period 2 mates. The five highest and five lowest ranking males were identified as heat stress resistant and susceptible, respectively. Resistant males were 61.2 units superior in the index, 57.5% greater in pregnancy rate, and 57.6 total fetuses greater than susceptible males. Progeny of resistant sires were superior to progeny of susceptible sires in estimated breeding value by 4.5 units for the index, 4.1% for pregnancy rate, and 5.2 fetuses (P < 0.0001). Heritability estimates for the index, pregnancy rate, and number of fetuses ranged from 0.09 to 0.13, suggesting male fertility following heat stress is heritable and responds to selection.     

Optimization of Zn2+-containing mobile phase for simultaneous determination of kynurenine,kynurenic acid and tryptophan in human plasma by high performance liquid chromatography

In the present work we have developed a standard-addition HPLC method using a mobile phase containing low concentration of ZnAc₂ to determine physiological level of kynurenine (KYN), kynurenic acid (KYNA) and tryptophan (TRP) in human plasma simultaneously. The method greatly improved the sensitivity of KYNA, the resolution of KYNA and TRP, and avoided clotting risk caused by high concentration of ZnAc₂ in mobile phase. Samples were deproteinized by addition of equal volume of 0.6 mol/L HClO₄. Analytes in supernatants were separated by an Agilent HC-C18 (2) analytical column; an aqueous mobile phase containing 20 mmol/L NaAc, 3 mmol/L ZnAc₂ and 7% acetonitrile at flow rate of 1.0 mL/min. Detections were performed by a variable wavelength detector at wavelength 365 nm for KYN and a fluorescence detector at wavelengths excitation 344 nm and emission 398 nm for KYNA and TRP. Good linear responses were found with r² > 0.999 for all analytes within the concentration range of physiological levels. The limit of detection of the developed method was 0.03 μmol/L, 0.9 nmol/L and 0.4 μmol/L for KYN, KYNA and TRP respectively. Recoveries from spiked human plasma were 95.4–99.7% for KYN, 98.9–104% for KYNA and 96.5–100.2% for TRP. All CVs for the repeatability and intermediate precision were less than 5%. We conclude that the developed method is helpful for the research investigations in KYN pathway of TRP metabolism.     

Oxygen regulates the effective diffusion distance of nitric oxide in the aortic wall

Endothelium-derived nitric oxide (NO) is critical in maintaining vascular tone. Accumulating evidence shows that NO bioavailability is regulated by oxygen concentration. However, it is unclear to what extent the oxygen concentration regulates NO bioavailability in the vascular wall. In this study, a recently developed experimental setup was used to measure the NO diffusion flux across the aortic wall at various oxygen concentrations. It was observed that for a constant NO concentration at the endothelial surface, the measured NO diffusion flux out of the adventitial surface at [O₂] = 0 μM is around fivefold greater than at [O₂] = 150 μM, indicating that NO is consumed in the aortic wall in an oxygen-dependent manner. Analysis of experimental data shows that the rate of NO consumption in the aortic wall is first order with respect to [NO] and first order with respect to [O₂], and the rate constant k₁ was determined as (4.0 ± 0.3) × 10³ M^?1 s^?1. Computer simulations demonstrate that NO concentration distribution significantly changes with oxygen concentration and the effective NO diffusion distance at low oxygen level ([O₂] ≤ 25 μM) is significantly longer than that at high oxygen level ([O₂] = 200 μM). These results suggest that oxygen-dependent NO consumption may play an important role in dilating blood vessels during hypoxia by increasing the effective NO diffusion distance.     

New HPLC–MS method for the simultaneous quantification of the antileukemia drugs imatinib,dasatinib, and nilotinib in human plasma

A new method using high performance liquid chromatography coupled with electrospray mass spectrometry is described for the quantification of plasma concentration of tyrosine kinase inhibitors imatinib, dasatinib and nilotinib. A simple protein precipitation extraction procedure was applied on 250 μl of plasma aliquots. Chromatographic separation of drugs and Internal Standard (quinoxaline) was achieved with a gradient (acetonitrile and water + formic acid 0.05%) on a C18 reverse phase analytical column with 20 min of analytical run, at flow rate of 1 ml/min. Mean intra-day and inter-day precision for all compounds were 4.3 and 11.4%; mean accuracy was 1.5%; extraction recovery ranged within 95 and 114%. Calibration curves ranged from 10,000 to 62.5 ng/ml. The limit of quantification was set at 78.1 ng/ml for imatinib and at 62.5 ng/ml for dasatinib and nilotinib. This novel developed methodology allows a specific, sensitive and reliable simultaneous determination of the three tyrosine kinase inhibitors imatinib, dasatinib and nilotinib in a single chromatographic run, useful for drugs estimation in plasma of patients affected by chronic myeloid leukemia.     

Simultaneous determination of ABT-888, a poly (ADP-ribose) polymerase inhibitor,and its metabolite in human plasma by liquid chromatography/tandem mass spectrometry

A reversed-phase liquid chromatography coupled to tandem mass spectrometry (LC–MS/MS) method was developed and validated for simultaneous determination of ABT-888 and its major metabolite (M8) in human plasma. Sample preparation involved a liquid–liquid extraction by the addition of 0.25 ml of plasma with 10 μl of 1 M NaOH and 1.0 ml ethyl acetate containing 50 ng/ml of the internal standard zileuton. The analytes were separated on a Waters XBridge C₁₈ column using a gradient mobile phase consisting of methanol/water containing 0.45% formic acid at the flow rate of 0.2 ml/min. The analytes were monitored by tandem mass spectrometry with electrospray positive ionization. Linear calibration curves were generated over the ABT-888 and M8 concentration ranges of 1–2000 ng/ml in human plasma. The lower limits of quantitation (LLOQ) were 1 ng/ml for both ABT-888 and M8 in human plasma. The accuracy and within- and between-day precisions were within the generally accepted criteria for bioanalytical method (<15%). This method was successfully employed to characterize the plasma concentration–time profile of ABT-888 after its oral administration in cancer patients.     

Development and validation of a high throughput and robust LC–MS/MS with electrospray ionization method for simultaneous quantitation of diltiazem and its two metabolites in human plasma: Application to a bioequivalence study

A high throughput and specific method using ultra performance liquid chromatography tandem mass spectrometry (UPLC–MS/MS) was developed for the simultaneous determination of diltiazem and its two metabolite (N-desmethyldiltiazem and O-desacetyldiltiazem) in human plasma. A one-step liquid–liquid extraction (LLE) with methyl-t-butyl ether (MTBE) involved for the extraction of diltiazem (DLTZ), metabolites (DMeD and DAcD) and internal standard. Analytes were chromatographed on a ACQUITY UPLC? BEH C₁₈ column (100 mm × 2.1 mm, i.d., 1.7 μm) with isocratic elution at a flow rate of 0.2 mL/min using 10 mM ammonium acetate buffer–acetonitrile (25:75, v/v). The Quattro Premier XE LC–MS/MS was operated under the multiple reaction-monitoring mode (MRM) using the electrospray ionization technique. Using 300 μL plasma, the method was validated over the concentration range 0.48–639.9 ng/mL for DLTZ and 0.24–320.1 for DMeD and 0.24–320.7 ng/mL for DAcD, with a lower limit of quantification of 0.48 ng/mL for DLTZ and 0.24 ng/mL for metabolites. The intra- and inter-day precision and accuracy were within 10.0%. The recovery was 77.4%, 76.0%, 74.5% and 74.1% for DLTZ, DMeD, DAcD and Ziprasidone, respectively. Total run time was 2.0 min only.     

Biodiesel-fuel production in a packed-bed reactor using lipase-producing Rhizopus oryzae cells immobilized within biomass support particles

A packed-bed reactor (PBR) system using fungus whole-cell biocatalyst was developed for biodiesel fuel production by plant oil methanolysis. Lipase-producing Rhizopus oryzae cells were immobilized within 6 mm × 6 mm × 3 mm cuboidal polyurethane foam biomass support particles (BSPs) during batch cultivation in a 20-l air-lift bioreactor. Emulsification of the reaction mixture containing soybean oils and water improved the methanolysis reaction rate. Using a high flow rate for the reaction mixture in the PBR caused exfoliation of the immobilized cells from the BSPs, while the inefficient mixing of the reaction mixture at low flow rates allowed the BSPs to be covered with a hydrophilic layer of high methanol concentration, leading to a significant decrease in lipase activity. A high methyl ester content of over 90% was achieved at a flow rate of 25 l/h in the first cycle of repeated batch methanolysis and a high value of around 80% was maintained even after the tenth cycle. Comparison with methanolysis reaction in a shaken bottle suggested that the PBR enhances repeated batch methanolysis by protecting immobilized cells from physical damage and excess amounts of methanol. The process presented here is therefore considered to be promising for industrial biodiesel-fuel production.     

Simultaneous determination of paracetamol,pseudoephedrine, dextrophan and chlorpheniramine in human plasma by liquid chromatography–tandem mass spectrometry

For the first time, a highly sensitive and simple LC–MS/MS method after one-step precipitation was developed and validated for the simultaneous determination of paracetamol (PA), pseudoephedrine (PE), dextrophan (DT) and chlorpheniramine (CP) in human plasma using diphenhydramine as internal standard (IS). The analytes and IS were separated on a YMC-ODS-AQ C₁₈ Column (100 mm × 2.0 mm, 3 μm) by a gradient program with mobile phase consisting of 0.3% (v/v) acetic acid and methanol at a flow rate of 0.30 mL/min. Detection was performed on a triple quadrupole tandem mass spectrometer via electrospray ionization in the positive ion mode. The method was validated and linear over the concentration range of 10–5000 ng/mL for PA, 2–1000 ng/mL for PE, 0.05–25 ng/mL for DT and 0.1–50 ng/mL for CP. The accuracies as determined from quality control samples were in range of ?8.37% to 3.13% for all analytes. Intra-day and inter-day precision for all analytes were less than 11.54% and 14.35%, respectively. This validated method was successfully applied to a randomized, two-period cross-over bioequivalence study in 20 healthy Chinese volunteers receiving multicomponent formulations containing 325 mg of paracetamol, 30 mg of pseudoephedrine hydrochloride, 15 mg of dextromethorphan hydrobromide and 2 mg of chlorphenamine maleate.     

Fermentation process for continuous production of succinic acid in a fibrous bed bioreactor

Succinic acid (SA) was produced from Actinobacillus succinogenes with high cell density by continuous fermentation using fibrous bed bioreactor (FBB). The effects of feeding glucose concentration, dilution rate, and pH on continuous production of SA were examined to achieve an efficient and economical bioprocess. The optimum feeding glucose concentration, dilution rate, and pH were 80 g/L, 0.05 1/h, and 6.0–6.5, respectively. A SA concentration of 55.3 ± 0.8 g/L, productivity of 2.77 ± 0.04 g/L/h, and yield of 0.8 ± 0.02 g/g were obtained, and the continuous fermentation exhibited long-term stability for as long as 18 days (440 h) with no obvious fluctuations in both SA and biomass levels. The Jerusalimsky equation for the specific rate of SA production presented the inhibition phenomenon of the product, demonstrating that 60 g/L SA might be a critical concentration in this continuous FBB system. The results obtained could be beneficial for future fermentor designs and improvements in SA production.     

High efficiency bioethanol production from barley straw using a continuous pretreatment reactor

We developed a new pretreatment process for producing high-efficiency bioethanol from a lignocellulosic biomass. Barley straw was pretreated with sodium hydroxide in a twin-screw extruder for continuous pretreatment. The biomass to ethanol ratio (BTER) for optimal pretreatment conditions was evaluated by response surface methodology. Simultaneous saccharification and fermentation (SSF) was conducted to investigate the BTER with 30 FPU/g cellulose of enzyme and 7% (v/v) yeast (Saccharomyces cerevisiae CHY 1011) using 10% (w/v) pretreated biomass under various pretreatment conditions. The maximum BTER was 73.00% under optimal pretreatment conditions (86.61 °C, 0.58 M, and 84.79 mL/min for temperature, sodium hydroxide concentration, and solution flow rate, respectively) and the experimental BTER was 70.01 ± 0.59%. SSF was performed to investigate the optimal enzyme and biomass dosage. As a result, maximum ethanol concentration and ethanol yield were 46.00 g/L and 77.36% at a loading pretreated biomass of 20% with 30 FPU/g cellulose of the enzyme dosage for barley straw to bioethanol. These results are a significant contribution to the production of bioethanol from barley straw.     

Determination of picamilon concentration in human plasma by liquid chromatography–tandem mass spectrometry

A rapid liquid chromatography–tandem mass spectrometry (LC–MS/MS) method was developed and validated for the determination of picamilon concentration in human plasma. Picamilon was extracted from human plasma by protein precipitation. High performance liquid chromatography separation was performed on a Venusil ASB C₁₈ column with a mobile phase consisting of methanol ?10 mM ammonium acetate–formic acid (55:45:01, v/v/v) at a flow rate of 0.65 ml/min. Acquisition of mass spectrometric data was performed in selected reaction monitoring mode, using the transitions of m/z 209.0 → m/z (78.0 + 106.0) for picamilon and m/z 152.0 → m/z (93.0 + 110.0) for paracetamol (internal standard). The method was linear in the concentration range of 1.00–5000 ng/ml for the analyte. The lower limit of quantification was 1.00 ng/ml. The intra- and inter-assay precision were below 13.5%, and the accuracy was between 99.6% and 101.6%. The method was successfully applied to characterize the pharmacokinetic profiles of picamilon in healthy volunteers. This validated LC–MS/MS method was selective and rapid, and is suitable for the pharmacokinetic study of picamilon in humans.     

Helical image reconstruction of the outward-open human erythrocyte band 3 membrane domain in tubular crystals

The C-terminal membrane domain of erythrocyte band 3 functions as an anion exchanger. Here, we report the three-dimensional (3D) structure of the membrane domain in an inhibitor-stabilized, outward-open conformation at 18 Å resolution. Unstained, frozen-hydrated tubular crystals containing the membrane domain of band 3 purified from human red blood cells (hB3MD) were examined using cryo-electron microscopy and iterative helical real-space reconstruction (IHRSR). The 3D image reconstruction of the tubular crystals showed the molecular packing of hB3MD dimers with dimensions of 60 × 110 Å in the membrane plane and a thickness of 70 Å across the membrane. Immunoelectron microscopy and carboxyl-terminal digestion demonstrated that the intracellular surface of hB3MD was exposed on the outer surface of the tubular crystal. A 3D density map revealed that hB3MD consists of at least two subdomains and that the outward-open form is characterized by a large hollow area on the extracellular surface and continuous density on the intracellular surface.     

Freezing of boar semen can be simplified by handling a specific portion of the ejaculate with a shorter procedure and MiniFlatPack packaging

Low sperm survival post-thaw and time-consuming procedures for conventional freezing (CF) hamper the commercial application of cryopreserved boar semen. We had previously proven that boar spermatozoa in the first 10 mL of the sperm-rich fraction, SRF (the so-called P1, the sperm-peak portion of the ejaculate) sustain best handling in vitro, since they probably bathe in an aliquot of seminal plasma (SP) with specific composition. Here, we performed three experiments to determine: Exp I: the concentration of bicarbonate among portions of the ejaculate; Exp II: the effects of bicarbonate doses on sperm motility and; Exp III: the outcome of a faster, simpler freezing method (SF), handling P1-spermatozoa packed in MiniFlatPacks? (MFP) vs. CF and vs. SRF-spermatozoa (2 × 2 factorial design). The bicarbonate content in SP was, among portions/fractions of the ejaculate, lowest in P1 (13.71 mM/L, P < 0.0001, Exp I). Boar spermatozoa require bicarbonate in the extender (to the levels present in P1) to maintain acceptable motility over a 120-h period at 16–17 °C (Exp II). Sperm freezing was dramatically shortened (from 8 to 3.5 h) by the SF-procedure. P1- and SRF-spermatozoa survived equally both CF- and SF-freezing (% total motility 30 min PT; P1-CF: 65.2 ± 5.4% and P1-SF: 68.9 ± 2.4%; SRF-CF: 64.4 ± 2.7%; SRF-SF: 55.8 ± 3.1%, ns). Interestingly, in contrast to SRF, there were no significant variations in 30-min PT-survival among either ejaculates or boars when the P1 was frozen, independent of the handling method (CF or SF). In conclusion, such a faster freezing protocol of semen packed in MFP could be advantageously applied to P1-spermatozoa (P1-SF), while the rest of the ejaculated spermatozoa could still be used for production of conventional artificial insemination (AI) doses, thus allowing for a maintained routine management of commercially relevant stud boars.     

Real-time control strategy for nitrogen removal via nitrite in a SHARON reactor using pH and ORP sensors

This paper presents a real-time control strategy for nitrogen removal via nitrite in a continuous flow SHARON reactor using on-line available and industrially feasible sensors (pH and ORP). The developed control strategy optimizes the length of aerobic and anoxic phases as well as the external carbon source addition. This strategy, implemented in a laboratory-scale SHARON reactor fed with synthetic wastewater and real dewatering sludge supernatant, was able to cope with step variations in influent flow rate and ammonium concentration. The main advantages of this control strategy over the traditional operation mode with fixed carbon source dosification and fixed length cycle operation were: better effluent quality (ammonia concentration decreased from 12 to 2 mg NH₄–N L^?1 and nitrogen removal efficiency raised from 95% to 98%) as result of the shorter cycle length: 2.9 h versus 4.0 h, and savings in external carbon addition: 1332 mg COD d^?1 versus 2100 mg COD d^?1.     

Simultaneous determination of active xanthone glycosides,timosaponins and alkaloids in rat plasma after oral administration of Zi-Shen Pill extract for the pharmacokinetic study by liquid chromatography–tandem mass spectrometry

A sensitive and reliable liquid chromatography–electrospray ionization-tandem mass spectrometry (LC–ESI-MS/MS) has been developed and validated for simultaneous determination of active components, i.e., xanthone glycosides (neomangiferin and mangiferin), timosaponins (timosaponin E1, timosaponin B-II and timosaponin B) and alkaloids (palmatine and berberine) in rat plasma after oral administration of Zi-Shen Pill extract. Plasma samples were pretreated by protein precipitation with acetonitrile containing the internal standards ginsenoside Re (for xanthone glycosides and timosaponins) and tetrahydroberberine (for alkaloids). LC separation was achieved on a Zorbax SB-C₁₈ column (150 mm × 2.1 mm I.D., 3.5 μm) with gradient elution using a mobile phase consisting of acetonitrile-0.1% formic acid in water at a flow rate of 0.25 mL/min. The detection was carried out by a triple–quadrupole tandem mass spectrometer in multiple reaction monitoring (MRM) mode via polarity switching between negative (for xanthone glycosides and timosaponins) and positive (for alkaloids) ionization mode. Linear calibration curves were obtained over the concentration range of 5–1000 ng/mL for mangiferin, 0.5–100 ng/mL for neomangiferin, timosaponin E1, timosaponin B-II and timosaponin B, and 0.05–10 ng/mL for palmatine and berberine. The mean recovery of all the analytes ranged from 64.7 to 93.8%. The intra- and inter-day precision (% R.S.D.) was within 11.7% and accuracy (% bias) ranged from ?9.0 to 10.9%. This fully validated method was successfully applied to pharmacokinetic study of the above seven compounds in rats.