Improving the lactic acid production of Actinobacillus succinogenes by using a novel fermentation and separation integration system

This work describes the development of a novel integrated system for lactic acid production by Actinobacillus succinogenes. Fermentation and separation were integrated with the use of a microfiltration (MF) membrane, and lactic acid was recovered by resin adsorption following MF. The fermentation broth containing residual sugar and nutrients was then recycled back into the fermenter after lactic acid adsorption. This novel approach overcame the problem of product inhibition and extended the cell growth period from 41 h to 120 h. Production of lactic acid was improved by 23% to 183.4 g L⁻¹. The overall yield and productivity for glucose were 0.97 g g⁻¹ and 1.53 g L⁻¹ h⁻¹, respectively. These experimental results indicate that the integrated system could benefit continuous production of lactic acid at high levels.     

Lactic acid and biosurfactants production from hydrolyzed distilled grape marc

Acid hydrolysis of distilled grape marc, an useless agricultural residue from wineries, was carried out using dilute sulfuric acid (1–5%) at several reaction times and 130 °C, in order to obtain monomeric sugars which after supplementation with corn steep liquor (10 g/L) and yeast extract (10 g/L) were used to carry out the fermentation into lactic acid by Lactobacillus pentosus without detoxification stage. Xylose was the main sugar generated followed by glucose and arabinose. Possible inhibitor compounds such as acetic acid liberated from acetyl groups, and furfural and hydroxymethylfurfural generated by sugars dehydration, were produced as degradation byproducts. The hydrolysis stage was optimized by using an incomplete factorial design where the independent variables were the percentage of catalyzer, the reaction time and the temperature. The optima conditions in terms of xylose concentration were 3.3% H₂SO₄, 125 min and 130 °C, but due to the high furfural concentration, two other conditions using lower reaction times (30 and 77.5 min) were also selected to assay the fermentation. Although any condition was feasible to fully utilize the relatively broad spectra of sugars released by the acid hydrolysis, under the shorter reaction time the best results were achieved (Q_P = 0.476 g/L h; Y_P/S = 0.71 g/g) which represents a theoretical yield of 97%. Furthermore, L. pentosus produced 4.8 mg/L of intracellular biosurfactants, measured as biosurfactin, representing a yield of 0.60 mg of intracellular biosurfactant per g of sugars consumed.     

Use of different carbon sources in cultivation of recombinant Pichia pastoris for angiostatin production

To improve the growth of recombinant Pichia pastoris with a phenotype of Mut^S and expression of angiostatin, the effects of glycerol, sorbitol, acetate and lactic acid which were, respectively, added together with methanol in the expression phase, were studied in a 5-l fermentor. Methanol concentration was automatically controlled at 5 g/l by a methanol monitor and control system, while the feeding of the other carbon source was manually adjusted. The angiostatin production level was 108 mg/l when glycerol was added at an initial rate of 2.3 g/h and gradually increased to 9.9 g/h within an induction period of 96 h. The angiostatin concentration was 141 mg/l as sorbitol was used, while only 52 mg/l were obtained on acetate. The highest angiostatin production of 191 mg/l was achieved as lactic acid was used; whose feeding rate was gradually increased from 2.6 to 11.3 g/h. Lactic acid accumulated during the induction phase and reached 6.3 g/l at the end of fermentation. However, the accumulation of lactic acid did not interfere with angiostatin production, indicating that lactic acid to be a non-repressive carbon source. The average productivity and specific productivity of angiostatin obtained on lactic acid and methanol were, respectively, 2.96 and 0.044 mg/(g h), 1.7- and 2.5-fold of those obtained in the fermentation fed with glycerol and methanol.     

Introduction of a bacterial acetyl-CoA synthesis pathway improves lactic acid production in Saccharomyces cerevisiae

Acid-tolerant Saccharomyces cerevisiae was engineered to produce lactic acid by expressing heterologous lactate dehydrogenase (LDH) genes, while attenuating several key pathway genes, including glycerol-3-phosphate dehydrogenase1 (GPD1) and cytochrome-c oxidoreductase2 (CYB2). In order to increase the yield of lactic acid further, the ethanol production pathway was attenuated by disrupting the pyruvate decarboxylase1 (PDC1) and alcohol dehydrogenase1 (ADH1) genes. Despite an increase in lactic acid yield, severe reduction of the growth rate and glucose consumption rate owing to the absence of ADH1 caused a considerable decrease in the overall productivity. In Δadh1 cells, the levels of acetyl-CoA, a key precursor for biologically applicable components, could be insufficient for normal cell growth. To increase the cellular supply of acetyl-CoA, we introduced bacterial acetylating acetaldehyde dehydrogenase (A-ALD) enzyme (EC 1.2.1.10) genes into the lactic acid-producing S. cerevisiae. Escherichia coli-derived A-ALD genes, mhpF and eutE, were expressed and effectively complemented the attenuated acetaldehyde dehydrogenase (ALD)/acetyl-CoA synthetase (ACS) pathway in the yeast. The engineered strain, possessing a heterologous acetyl-CoA synthetic pathway, showed an increased glucose consumption rate and higher productivity of lactic acid fermentation. The production of lactic acid was reached at 142 g/L with production yield of 0.89 g/g and productivity of 3.55 g L⁻¹ h⁻¹ under fed-batch fermentation in bioreactor. This study demonstrates a novel approach that improves productivity of lactic acid by metabolic engineering of the acetyl-CoA biosynthetic pathway in yeast.     

Two-step acid and alkaline ethanolysis/alkaline peroxide fractionation of sugarcane bagasse and rice straw for production of polylactic acid precursor

Sugarcane bagasse and rice straw were subjected to acid and alkaline ethanolysis and sequential enzymatic hydrolysis to produce glucose for lactic acid production. Influence of physico-chemical treatments using ultrasonic bath and ultrasonic probe was studied compared with mechanical stirring. The results showed that the highest glucose yield with least contamination of xylose was obtained from acid ethanolysis fractionation (5 N H₂SO₄ + 50%, v/v ethanol) when stirred at 90 °C for 4 h. Alkaline ethanolysis accomplished high amount of both glucose and xylose released, however it was not favorable substrate for homofermentative lactic acid bacteria. In order to enhance enzymatic hydrolysis of acid ethanolysis fractionated samples, lignin was subsequently removed by the second step alkaline/peroxide delignification. The maximum lactic acid was obtained at 23.6 ± 0.2 g/L from Lactobacillus casei fermentation after 72 h when hydrolysate from two-step acid hydrolysis and alkaline/peroxide fractionated sugarcane bagasse containing 24.6 g/L initial glucose concentration was used as substrate.     

d- and l-lactic acid production from fresh sweet potato through simultaneous saccharification and fermentation

The aim of this study was to develop a bioprocess for l- and d-lactic acid production from raw sweet potato through simultaneous saccharification and fermentation by Lactobacillus paracasei and Lactobacillus coryniformis, respectively. The effects of enzyme and nitrogen source concentrations as well as of the ratio of raw material to medium were investigated. At dried material concentrations of 136.36–219.51 g L⁻¹, yields of 90.13–91.17% (w/w) and productivities of 3.41–3.83 g L⁻¹ h⁻¹ were obtained with lactic acid concentrations as high as 198.32 g L⁻¹ for l-lactic acid production. In addition, d-lactic acid was produced with yields of 90.11–84.92% (w/w) and productivities of 2.55–3.11 g L⁻¹ h⁻¹ with a maximum concentration of 186.40 g L⁻¹ at the same concentrations of dried material. The simple and efficient process described in this study will benefit the tuber and root-based lactic acid industries without requiring alterations in plant equipment.     

Biocoagulation of dairy wastewater by Lactobacillus casei TISTR 1500 for protein recovery using micro-aerobic sequencing batch reactor (micro-aerobic SBR)

This study investigated biocoagulation of dairy process wastewater with a new system of the micro-aerobic sequencing batch reactor (micro-aerobic SBR) at a batch bench scale. Lactobacillus casei TISTR 1500 was inoculated to produce acid coagulants under non-sterile acid conditions. Colloidal proteins were removed by employing a solid–liquid separation step as a pre-treatment. The micro-aerobic SBR process had the efficiencies of organic reduction with 73.6 ± 5.9%, 90.1 ± 1.3%, and 85.7 ± 0.6% of chemical oxygen demand (COD), proteins, and sugars without adding external coagulant, and flocculant, respectively. Sustained acid fermentation was achieved for at least 150 cycles by applying an indigenous fill-react-settle-draw-idle sequence in the micro-aerobic SBR process and the use of different solid retention times at 3, 6, 9, 12 and 15 d, consecutively. The micro-aerobic SBR system was able to support lactic acid bacteria (LAB) growth with long SRT (12 and 15 d), due to at least 3 factors: the large inoculum size employed, relatively high concentration of lactic acid produced, and the change in pH during the restoring stage. Current process offered a possible alternative to the more costly chemical and other biological pre-treatments.     

Molecular characterization and molasses fermentation performance of a wild yeast strain operating in an extremely wide temperature range

Molasses fermentation performance by both a cryotolerant and a thermophilic yeast (strain AXAZ-1) isolated from grapes in Greece was evaluated in an extremely wide temperature range (3–40 °C). Sequence analysis of the 5.8S internal transcribed spacer and the D1/D2 ribosomal DNA (rDNA) regions assigned isolate to Saccharomyces cerevisiae. Restriction fragment length polymorphism of the mitochondrial DNA showed that strain AXAZ-1 is genetically divergent compared to other wild strains of Greek origin or commercial yeast starters. Yeast cells growing planktonically were capable of fermentation in a wide temperature spectrum, ranging from 3 °C to 38 °C. Immobilization of yeast on brewer’s spent grains (BSG) improved the thermo-tolerance of the strain and enabled fermentation at 40 °C. Time to complete fermentation with the immobilized yeast ranged from 20 days at 3 to 38 h at 40 °C. The daily ethanol productivity reached maximum (58.1 g/L) and minimum (2.5 g/L) levels at 30 and 3 °C, respectively. The aroma-related compounds’ profiles of immobilized cells at different fermentation temperatures were evaluated by using solid phase microextraction (SPME) gas chromatography–mass spectrometry (GC–MS). Molasses fermentation resulted in a high quality fermentation product due to the low concentrations of higher and amyl alcohols at all temperatures tested. Strain AXAZ-1 is very promising for the production of ethanol from low cost raw materials, as it was capable to perform fermentations of high ethanol concentration and productivities in both low and high temperatures.     

Enhanced ethanol production by continuous fermentation in a two-tank system with cell recycling

An experimental method for producing ethanol continuously was designed and tested with a cell-recycling two-tank system, which was composed of two fermentors, each of which was individually equipped with a settler for recycling flocculent yeast. This system was effective for the continuous fermentation of ethanol from sucrose at high cell-recycling (r = 0.8–0.9) and dilution (up to 0.48 h^?1) rates. The system has several advantages; the high cell concentration in the fermentors and relief of substrate and product inhibition. Thus, the enhanced productivity using this continuous fermentation with the two-tank cell-recycling system was significantly higher compared with that of the batch fermentation. The results indicate that increased recycling ratios caused an increase in biomass concentration and subsequently, product concentration in the tank. The ethanol productivity increased with the dilution rate, but higher dilution rates could render increasing amounts of sugar unconverted. Continuous fermentation with the sugar feed concentration of 160 g/l at r = 0.9 and dilution rate of 0.2 h^?1 achieved the highest productivity with less than 2% of the unconverted sugar in the product steam. Under the same cell recycling ratios a productivity range of 6.9–7.5 g/l h^?1 could be achieved with feeding concentrations of 80–200 g/l, while batch fermentation at these sugar concentrations led to productivities of 3.85–4.48 g/l h^?1.     

Purification of l-(+)-lactic acid from pre-treated fermentation broth using vapor permeation-assisted esterification

The vapor permeation-assisted esterification of l-(+)-lactic acid and ethanol was investigated using a zeolite membrane. Pervaporation and vapor permeation were initially investigated for dehydration performances, and the latter showed much better results. The molecular sieve property of the membrane resulted in a high separation factor of over 1000 for all conditions. The maximum flux was 10.24 kg/(m² h) at a feed temperature of 145 °C, a water feed concentration of 10 wt%, and a feed pressure of 4.0 bars, respectively. For vapor permeation-assisted esterification using synthetic solutions, the productivity and ethyl lactate yield strongly depended on the dehydration rate. Realistic purifications were performed with fermentation broths of Pediococcus pentosaceus as the lactic acid producer. Experimental results revealed that most of the lactic acid was converted into ethyl lactate at the final stage of the reaction. After distillation and hydrolysis, high purity l-(+)-lactic acid was obtained with more than 95% recovery yields.     

Effects of formic acid,molasses and inoculant additives on corn silage composition,organic matter digestibility and microbial protein synthesis in sheep

This study examined the production of com silages with low or high lactic acid concentrations, provided by the addition of formic acid (0.5%), molasses (5%) or microbial inoculant (homofermentative lactic acid bacteria, 10 g/tonne). After the fermentation period, sheep were fed the silages to determine true and apparent digestibility of the organic matter and microbial protein synthesis. The experiment were carried out with four KıvırcıkxMorkaraman sheep, 1.5 years old, fixed with cannula in their rumen and duodenum.Lactic acid concentrations were significantly higher in silages treated with enzyme or molasses compared to other specific treatments. Acetic acid concentration was highest in silage treated with formic acid, and lowest in silage treated with molasses (P < 0.05). The by-pass of crude protein was highest in silage treated with formic acid.     

Fermentative production of succinic acid from straw hydrolysate by Actinobacillus succinogenes

In this work, straw hydrolysates were used to produce succinic acid by Actinobacillus succinogenes CGMCC1593 for the first time. Results indicated that both glucose and xylose in the straw hydrolysates were utilized in succinic acid production, and the hydrolysates of corn straw was better than that of rice or wheat straw in anaerobic fermentation of succinic acid. However, cell growth and succinic acid production were inhibited when the initial concentration of sugar, which was from corn straw hydrolysate (CSH), was higher than 60 g l^?1. In batch fermentation, 45.5 g l^?1 succinic acid concentration and 80.7% yield were attained after 48 h incubation with 58 g l^?1 of initial sugar from corn straw hydrolysate in a 5-l stirred bioreactor. While in fed-batch fermentation, concentration of succinic acid achieved 53.2 g l^?1 at a rate of 1.21 g l^?1 h^?1 after 44 h of fermentation. Our work suggested that corn straw could be utilized for the economical production of succinic acid by A. succinogenes.     

High production of poly-β-hydroxybutyrate (PHB) by an Azotobacter vinelandii mutant altered in PHB regulation using a fed-batch fermentation process

A mixed fermentation strategy based on exponentially fed-batch cultures (EFBC) and nutrient pulses with sucrose and yeast extract was developed to achieve a high concentration of PHB by Azotobacter vinelandii OPNA, which carries a mutation on the regulatory systems PTSNtr and RsmA-RsmZ/Y, that negatively regulate the synthesis of PHB. Culture of the OPNA strain in shake flaks containing PY-sucrose medium significantly improved growth and PHB production with respect to the results obtained from the cultures with the parental strain (OP). When the OPNA strain was cultured in a batch fermentation keeping constant the DOT at 4%, the maximal growth rate (0.16 h⁻¹) and PHB yield (0.30 g_PHB g_Suc⁻¹) were reached. Later, in EFBC, the OPNA strain increased three fold the biomass and 2.2 fold the PHB concentration in relation to the values obtained from the batch cultures. Finally, using a strategy of exponential feeding coupled with nutrient pulses (with sucrose and yeast extract) the production of PHB increased 7-fold to reach a maximal PHB concentration of 27.3 ± 3.2 g L⁻¹ at 60 h of fermentation. Overall, the use of the mutant of A. vinelandii OPNA, impaired in the PHB regulatory systems, in combination with a mixed fermentation strategy could be a feasible strategy to optimize the PHB production at industrial level.     

l-Lactic acid production from liquefied cassava starch by thermotolerant Rhizopus microsporus: Characterization and optimization

The thermotolerant Rhizopus microsporus DMKU 33 capable of producing l-lactic acid from liquefied cassava starch was isolated and characterized for its phylogenetic relationship and growth temperature and pH ranges. The concentrations of (NH₄)₂SO_4, KH₂PO₄, MgSO₄ and ZnSO₄·7H₂O in the fermentation medium was optimized for lactic acid production from liquefied cassava starch by Rhizopus microsporus DMKU 33 in shake-flasks at 40 °C. The fermentation was then studied in a stirred-tank bioreactor with aeration at 0.75 vvm and agitation at 200 rpm, achieving the highest lactic acid production of 84 g/L with a yield of 0.84 g/g at pH 5.5 in 3 days. Lactic acid production was further increased to 105–118 g/L with a yield of 0.93 g/g and productivity of 1.25 g/L/h in fed-batch fermentation. R. microsporus DMKU 33 is thus advantageous to use in simultaneous saccharification and fermentation for l-lactic acid production from low-cost starchy substrates.     

Modelling and simulation of continuous L (+) lactic acid production from sugarcane juice in membrane integrated hybrid-reactor system

Modelling and simulation was done for a two-stage membrane-integrated hybrid reactor system for continuous production of L (+) lactic acid under non-neutralizing conditions. The model captures microbial conversion of sugar cane juice to lactic acid under substrate–product inhibitions with downstream purification by nanofiltration. All the major phenomena and the governing parameters like fluid flow, feed dilution, substrate–product inhibitions, Donnan and steric effects during micro and nanofiltration for cell recycle, product separation and purification have been reflected in the modelling. The model describes a green, integrated continuous process of direct lactic acid production starting with a cheap, renewable carbon source. The highest lactic acid concentration achieved after the final stage of nanofiltration was 66.97 g/L at 13 kg/cm² operating pressure when the overall productivity reached 12.40 g/(L h). The developed model could successfully predict production, purification and transport of lactic acid through two stage membrane modules. Performance of the model was very good as indicated in the high overall correlation coefficient (R² > 0.980) and the low relative error (RE < 0.1).     

Inulin hydrolysis and citric acid production from inulin using the surface-engineered Yarrowia lipolytica displaying inulinase

The INU1 gene encoding exo-inulinase cloned from Kluyveromyces marxianus CBS 6556 was ligated into the surface display plasmid and expressed in the cells of the marine-derived yeast Yarrowia lipolytica which can produce citric acid. The expressed inulinase was immobilized on the yeast cells. The activity of the immobilized inulinase with 6 × His tag was found to be 22.6 U mg^?1 of cell dry weight after cell growth for 96 h. The optimal pH and temperature of the displayed inulinase were 4.5 and 50 °C, respectively and the inulinase was stable in the pH range of 3–8 and in the temperature range of 0–50 °C. During the inulin hydrolysis, the optimal inulin concentration was 12.0% and the optimal amount of added inulinase was 181.6 U g^?1 of inulin. Under such conditions, over 77.9% of inulin was hydrolyzed within 10 h and the hydrolysate contained main monosaccharides and disaccharides, and minor trisaccharides. During the citric acid production in the flask level, the recombinant yeast could produce 77.9 g L^?1 citric acid and 5.3 g L^?1 iso-citric acid from inulin while 68.9 g L^?1 of citric acid and 4.1 g L^?1 iso-citric acid in the fermented medium were attained within 312 h of the 2-L fermentation, respectively.     

Mixed culture of Saccharomyces cerevisiae and Acetobacter pasteurianus for acetic acid production

Mixed culture of Saccharomyces cerevisiae and Acetobacter pasteurianus was carried out for high yield of acetic acid. Acetic acid production process was divided into three stages. The first stage was the growth of S. cerevisiae and ethanol production, fermentation temperature and aeration rate were controlled at 32 °C and 0.2 vvm, respectively. The second stage was the co-culture of S. cerevisiae and A. pasteurianus, fermentation temperature and aeration rate were maintained at 34 °C and 0.4 vvm, respectively. The third stage was the growth of A. pasteurianus and production of acetic acid, fermentation temperature and aeration rate were controlled at 32 °C and 0.2 vvm, respectively. Inoculation volume of A. pasteurianus and S. cerevisiae was 16% and 0.06%, respectively. The average acetic acid concentration was 52.51 g/L under these optimum conditions. To enhance acetic acid production, a glucose feeding strategy was subsequently employed. When initial glucose concentration was 90 g/L and 120 g/L glucose was fed twice during fermentation, acetic acid concentration reached 66.0 g/L.     

Challenges in enzymatic hydrolysis and fermentation of pretreated Arundo donax revealed by a comparison between SHF and SSF

The perennial herbaceous crop Arundo donax is a potential feedstock for second-generation bioethanol production. In the present work, two different process options were investigated for the conversion of two differently steam-pretreated batches of A. donax. The pretreated raw material was converted to ethanol with a xylose-consuming Saccharomyces cerevisiae strain, VTT C-10880, by applying either separate hydrolysis and fermentation (SHF) or simultaneous saccharification and fermentation (SSF). The highest overall ethanol yield and final ethanol concentration were achieved using SHF (0.27 g g^?1 and 20.6 g L^?1 compared to 0.24 g g^?1 and 19.0 g L^?1 when SSF was used). The performance of both SHF and SSF was improved by complementing the cellulolytic enzymes with hemicellulases. The higher amount of acetic acid in one of the batches was shown to strongly affect xylose consumption in the fermentation. Only half of the xylose was consumed when batch 1 (high acetic acid) was fermented, compared to that 94% of the xylose was consumed in fermentation of batch 2 (lower acetic acid). Furthermore, the high amount of xylooligomers present in the pretreated materials considerably inhibited the enzymatic hydrolysis. Both the formation of xylooligomers and acetic acid thus need to be considered in the pretreatment process in order to achieve efficient conversion of A. donax to ethanol.     

Effects of culture redox potential on succinic acid production by Corynebacterium crenatum under anaerobic conditions

During mixed-acid fermentation by Corynebacterium crenatum under anaerobic conditions, two moles of NADH are required to synthesize 1 mol of succinic acid. In this work, four controlled culture redox potentials and different carbon sources with different oxidation states were used to investigate the possibility of enhancing the succinic acid production by increasing the availability of NADH. When the culture redox potential was ?300 mV, the yield of succinic acid was 0.31 g/g, representing a 72% increase compared with the yield when the culture redox potential was ?40 mV. Meanwhile, the molar ratio of succinic acid/lactic acid increased from 0.27 to 0.48. When 0.1% neutral red was added to the acid production medium, the yield of succinic acid was 0.25 g/g, and the molar ratio of succinic acid/lactic acid was 0.38. Both values were higher than those obtained from glucose only (0.19 g/g, 0.26) or gluconate (0.05 g/g, 0.18). A higher NADH/NAD⁺ ratio and increased enzymatic activity could be achieved to enhance the succinic acid production by manipulating the culture to a more reductive environment.     

Ability of a perfluoropolymer membrane to tolerate by-products of ethanol fermentation broth from dilute acid-pretreated rice straw

A perfluoropolymer (PFP) membrane has been prepared for use in vapor permeation to separate aqueous ethanol mixtures produced from rice straw with xylose-assimilating recombinant Saccharomyces cerevisiae. PFP membranes commonly have been used for dehydration process and possess good selectivity and high permeances. The effects of by-products during dilute acid pretreatment, addition of yeast extract, and ethanol fermentation on PFP membrane performance were investigated. While feeding mixtures of ethanol (90 wt%) in water, to which individual by-products (0.1–2 g/L) were added, the PFP membrane demonstrated no clear change in permeation rate (439–507 g m⁻² h⁻¹) or separation factor (14.9–23.5) from 2 to 4 h of the process. The PFP membrane also showed no clear change in permeation rate (751–859 g m⁻² h⁻¹) or separation factor (12.5–13.8) while feeding the mixture (final ethanol conc.: 61 wt%) of ethanol and distillation of the fermentation broth using a suspended fraction of dilute acid-pretreated rice straw for 20 h. These results suggest that the PFP membrane can tolerate actual distillation liquids from ethanol fermentation broth obtained from lignocellulosic biomass pretreated with dilute acid.