Photo-polymeriable chitosan derivative prepared by Michael reaction of chitosan and polyethylene glycol diacrylate (PEGDA)

N-Alkyled photo-polymeriable chitosan derivative (PEGDA-CS) was synthesized by Michael reaction of chitosan and polyethylene glycol diacrylate (PEGDA) under mild reaction conditions. The chemical structure and physical properties of PEGDA-CS were characterized by FT-IR, ¹H NMR, XRD and TG techniques. The degree of substitution (DS) of PEGDA-CS could be calculated from ¹H NMR. PEGDA-CS exhibited good solubility in distilled water. XRD analysis showed that PEGDA-CS was amorphous. TG results demonstrated that thermal stability of the derivate was lower than that of chitosan. Antimicrobial test showed that PEGDA-CS had the antimicrobial activity on Escherichia coli. It could photopolymerize under ultraviolet light with 2959 as initiator.     

Synthesis and characterization of water-soluble glucosyloxyethyl acrylate modified chitosan

A novel water-soluble chitosan derivative, glucosyloxyethyl acrylated chitosan was successfully synthesized by Michael addition reaction of chitosan with glucosyloxyethyl acrylate (GEA), and the obtained glyco-chitosan derivative was characterized by FT-IR, (1)H NMR, elemental analysis, XRD, TG, DSC and SEM. The FT-IR and (1)H NMR results showed that GEA residues were grafted onto the amino group of chitosan. The degree of substitution (DS) was calculated by elemental analysis. XRD data revealed that the introduced saccharide moieties decreased the crystalline structure of chitosan. TG and DSC results demonstrated that the glucosyloxyethyl acrylated chitosan was less thermal stable than chitosan. This efficient synthetic method provided an approach of preparing water-soluble glyco-chitosan derivatives. The obtained derivatives would show stronger specific affinity of lectin than chitosan thus would have potential applications in biomaterials.     

Synthesis of dehydroabietic acid-modified chitosan and its drug release behavior

A new type of chitosan derivative, dehydroabietic acid-modified chitosan (DAMC), was synthesized by the acylation reaction of chitosan with dehydroabietic acid chloride (DHAC) under microwave irradiation. The resulting product (DAMC) was characterized by FT-IR, UV, ¹H NMR, X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and elemental analysis. The degree of substitution (DS) of DAMC was 16.5%. And chitosan and DAMC were used as carriers of fenoprofen calcium (FC), and their controlled release behavior in artificial intestinal juice was studied. The results showed that the controlled release of FC from the carrier of DAMC is better than that from original chitosan.     

Synthesis and anticoagulant activity of the quaternary ammonium chitosan sulfates

Quaternary ammonium chitosan sulfates with diverse degrees of substitution (DS) ascribed to sulfate groups between 0.52 and 1.55 were synthesized by reacting quaternary ammonium chitosan with an uncommon sulfating agent (N(SO₃Na)₃) that was prepared from sodium bisulfite (NaHSO₃) through reaction with sodium nitrite (NaNO₂) in the aqueous system homogeneous. The structures of the derivatives were characterized by FTIR, ¹H NMR and ¹³C NMR. The factors affecting DS of quaternary ammonium chitosan sulfates which included the molar ratio of NaNO₂ to quaternary ammonium chitosan, sulfated temperature, sulfated time and pH of sulfated reaction solution were investigated in detail. Its anticoagulation activity in vitro was determined by an activated partial thromboplastin time (APTT) assay, a thrombin time (TT) assay and a prothrombin time (PT) assay. Results of anticoagulation assays showed quaternary ammonium chitosan sulfates significantly prolonged APTT and TT, but not PT, and demonstrated that the introduction of sulfate groups into the quaternary ammonium chitosan structure improved its anticoagulant activity obviously. The study showed its anticoagulant properties strongly depended on its DS, concentration and molecular weight.     

Selective carboxypropionylation of chitosan: synthesis, characterization, blood compatibility, and degradation

Two water-soluble chitosan (WSC) derivatives of N-succinyl-chitosan (NSCS) and N,O-succinyl-chitosan (NOSCS) with a degree of substitution (DS) that ranged form 0.28 to 0.61 were selectively synthesized by varying the molar ration of succinic anhydride and chitosan. The chemical structure and physical properties of the chitosan derivatives were characterized by FT-IR, ¹H NMR, and XRD. XRD analysis showed that the derivatives were amorphous. The lysozyme enzymatic degradation results revealed that the NSCS was of higher susceptibility to lysozyme. The degradation rate and the solubility of the chitosan derivatives were strongly determined by the degree of substitution and the position of the substitution. The results of antithrombotic properties, hemolytic properties and anticoagulant properties of WSCs indicated that the blood compatibility was dramatically improved, and the carboxyl group introduced on the C-6 or C-2 hydroxyl group appeared to impact anticoagulant activity in different ways.     

Preparation of soluble p-aminobenzoyl chitosan ester by Schiff's base and antibacterial activity of the derivatives

Schiff's base of chitosan (BCTS) was obtained by the reaction of chitosan (CTS) and benzaldehyde. Then BCTS reacted with acyl chloride which was synthesized by p-aminobenzoic acid and thionyl chloride to get N-benzoyl-O-aminobenzoyl chitosan ester (BABCTSE), removing the groups of amino protection of BABCTSE to get the final product (ABCTSE). The structures of the derivatives were characterized by FT-IR, (1)H NMR, (13)C NMR and elemental analysis. The elemental analysis results indicated that the degrees of substitution (DS) of the products were 16.8% and 40.4%. The synthesized compounds exhibited an excellent solubility in organic solvents. TG and DTG results showed that thermal stability of the derivatives was lower than that of chitosan. In addition, the existence of two different amido in the molecular structures contributed to forming more -NH(3)(+) in the acid solution which could make the derivatives have a greater advantage in the field of bacteriostasis.     

Preparation, characterization, and in vitro drug release behavior of biodegradable chitosan-graft-poly(1, 4-dioxan-2-one) copolymer

A novel copolymer of chitosan-g-poly(p-dioxanone) (CGP) was synthesized in bulk by ring-opening polymerization of p-dioxanone (PDO) initiated by the hydroxyl group or amino group of chitosan using SnOct₂ as catalyst. The chemical structure was determined by ¹H NMR. It was found that the feed ratio of chitosan to PDO had a great effect on the degree of polymerization (DP) and the substitution (DS) of PDO. The thermal stability and crystallization behavior of graft copolymer CGP were closely related to the values of DP and DS. When the resulting copolymer was used as Ibuprofen carrier, the release rate of Ibuprofen decreased compared with that of pure chitosan carrier. The drug release behavior was also influenced by the structure of graft copolymers.     

Preparation and properties of highly soluble chitosan–l-glutamic acid aerogel derivative

The objective of this work is to improve the solubility of chitosan at neutral or basic pH using the supercritical carbon dioxide (sc.CO₂). A novel water-soluble chitosan–l-glutamic acid (Cl-GA) aerogel derivative was synthesized by reaction of 85% deacetylated chitosan with l-glutamic acid (l-GA) in aq.AcOH subjected to solvent exchange prior to using sc.CO₂ as a nonsolvent for the polymer. The prepared aerogel derivative and molecular conformation of modified chitosan are characterized by using UV, FTIR, ¹H NMR, and CD techniques. Some physical properties and surface morphology were analyzed by X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetry (TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and porosimetry analysis. Overall, the sc.CO₂ assisted chitosan aerogel derivative opens new perspectives in biomedical applications.     

Antibacterial activity of quaternary ammonium chitosan containing mono or disaccharide moieties: Preparation and characterization

The 9 quaternary ammonium chitosans containing monosaccharides or disaccharides moieties were successfully synthesized by reductive N-alkylation then quaternized by N-(3-chloro-2-hydroxypropyl) trimethylammonium chloride (Quat-188). The chemical structures of quaternary ammonium chitosan derivatives were characterized by ATR-FTIR and ¹H NMR spectroscopy. The degree of N-substitution (DS) and the degree of quaternization (DQ) were determined by ¹H NMR spectroscopic method. It was found that the DS was in the range of 12–40% while the DQ was in the range of 90–97%. The results indicated that the O-alkylation was occured in this condition. Moreover, all quaternary ammonium chitosan derivatives were highly water-soluble at acidic, basic, and neutral pH. Minimum inhibitory concentration (MIC) antibacterial studies of these materials were carried out on Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria compared to quaternary ammonium N-octyl and N-benzyl chitosan derivatives. The quaternary ammonium mono and disaccharide chitosan derivatives showed very high MIC values which were in the range of 32 to >256 μg/mL against both bacteria. Also it was found that the antibacterial activity decreased with increasing the DS. This was due to the increased hydrophilicity of mono and disaccharide moieties. On the other hand, the low MIC values (8–32 μg/mL) were obviously observed when the DS of quaternary ammonium N-octyl and N-benzyl chitosan derivatives was lower than 18%. The results showed that the presence of hydrophobic moiety such as the N-benzyl group enhanced the antibacterial activity compared to the hydrophilic moiety against both bacteria.     

Synthesis,characterization and antifungal activity of quaternary derivatives of chitosan on Aspergillus flavus

Two series of new chitosan derivatives were synthesized by reaction of deacetylated chitosan (CH) with propyl (CH-Propyl) and pentyl (CH-Pentyl) trimethylammonium bromides to obtain derivatives with increasing degrees of substitution (DS). The derivatives were characterized by ¹H NMR and potentiometric titration techniques and their antifungal activities on the mycelial growth of Aspergillus flavus were investigated in vitro. The antifungal activities increase with DS and the more substituted derivatives of both series, CH-Propyl and CH-Pentyl, exhibited antifungal activities respectively three and six times higher than those obtained with commercial and deacetylated chitosan. The minimum inhibitory concentrations (MIC) were evaluated at 24, 48 and 72 h by varying the polymer concentration from 0.5 to 16 g/L and the results showed that the quaternary derivatives inhibited the fungus growth at polymer concentrations four times lower than that obtained with deacetylated chitosan (CH). The chitosans modified with pentyltrimethylammonium bromide exhibited higher activity and results are discussed taking into account the degree of substitution (DS).     

Characterization and antimicrobial activity of water-soluble N-(4-carboxybutyroyl) chitosans against some plant pathogenic bacteria and fungi

Water-soluble N-(4-carboxybutyroyl) chitosan derivatives with different degrees of substitution (DS) were synthesized to enhance the antimicrobial activity of chitosan molecule against plant pathogens. Chitosan in a solution of 2% aqueous acetic acid-methanol (1:1, v/v) was reacted with 0.1, 0.3, 0.6 and 1 mol of glutaric anhydride to give N-(4-carboxybutyroyl) chitosans at DS of 0.10, 0.25, 0.48 and 0.53, respectively. The chemical structures and DS were characterized by ¹H and ¹³C NMR spectroscopy, which showed that the acylate reaction took place at the N-position of chitosan. The synthesized derivatives were more soluble than the native chitosan in water and in dilute aqueous acetic acid and sodium hydroxide solutions. The antimicrobial activity was in vitro investigated against the most economic plant pathogenic bacteria of Agrobacterium tumefaciens and Erwinia carotovora and fungi of Botrytis cinerea, Pythium debaryanum and Rhizoctonia solani. The antimicrobial activity of N-(4-carboxybutyroyl) chitosans was strengthened than the un-modified chitosan with the increase of the DS. A compound of DS 0.53 was the most active one with minimum inhibitory concentration (MIC) of 725 and 800 mg/L against E. carotovora and A. tumefaciens, respectively and also in mycelial growth inhibiation against B. cinerea (EC₅₀ = 899 mg/L), P. debaryanum (EC₅₀ = 467 mg/L) and R. solani (EC₅₀ = 1413 mg/L).     

Homogeneous synthesis and characterization of quaternized chitin in NaOH/urea aqueous solution

Water-soluble and white quaternized chitin (QC) was homogeneously synthesized by stirring transparent chitin solution (2%) in 8 wt%NaOH/4 wt% urea aqueous solution containing 2,3-Epoxypropyltrimethylammonium Chloride (EPTMAC) at 10 °C for 24 h. The structure and properties of quaternized chitin were characterized by FT-IR, XRD, ¹H NMR, GPC, element analysis and ζ-potential. The results indicate that quaternary groups were successfully incorporated onto chitin backbones and the degree of substitution (DS) of quaternary groups can be easily adjusted by changing the molar ratio of chitin unit to EPTMAC. Additionally, quaternized chitin shows better antibacterial activity against Escherichia coli and Staphylococcus aureus as compared with chitosan. Thus, this work provides a simply and “green” method to functionalize chitin and the resulting quaternized chitin may have potential applications in environmental, food and biomedical fields.     

PAMAM conjugated chitosan through naphthalimide moiety for enhanced gene transfection efficiency

Development of efficient and safe gene carrier is the main hurdle for successful gene therapy till date. Poor water solubility and low transfection efficiency of chitosan are the main drawbacks to be efficient gene carrier for successful gene therapy. In this work, PAMAM conjugated chitosan was prepared through naphthalimide moiety by simple substitution reaction. The synthesis of the chitosan conjugates was confirmed by FTIR, ¹H NMR and XRD analyses. The conjugates showed enhanced DNA binding capability compared to that of unmodified chitosan. Moreover, the conjugates showed minimal cytotoxicity compared to that of polyethyleneimine (PEI, 25 kDa) and also showed good blood compatibility with negligible haemolysis. The transfection efficiency of the conjugate was significantly increased compared to that of unmodified chitosan and it also surpassed the transfection efficiency by PEI. Therefore, PAMAM conjugated chitosan can be used safely as alternate efficient gene delivery vector in gene therapy.     

Preparation and spectroscopic characterization of methoxy poly(ethylene glycol)-grafted water-soluble chitosan

The object of this study was to test the solubility of a methoxy poly(ethylene glycol) (MPEG)-grafted chitosan copolymer in organic solvents and aqueous solution. Water-soluble chitosan with low molecular weight (LMWSC) was used in a PEG-graft copolymerization. The MPEG was conjugated to chitosan using 4-dicyclohexylcarbodimide (DCC), and N-hydroxysuccimide (NHS). Introduction of PEG was confirmed by (1)H and (13)C NMR spectroscopy and FT-IR spectroscopy. The degree of substitution (DS) of MPEG into chitosan was calculated from (1)H NMR data and also by estimating the molecular weight (MW) using gel permeation chromatography (GPC). The DS values obtained from (1)H NMR spectroscopy and GPC were similar, indicating that MPEG-grafted LMWSC was synthesized and properly characterized. Furthermore, the introduction of PEG into chitosan increases the solubility in aqueous solutions over a range of pH values (4.0-11.0) and organic solvents such as DMF, DMSO, ethanol, and acetone.     

Evaluation of Electrostatic Interaction between Lysolecithin and Chitosan in Two-Layer Tuna Oil Emulsions by Nuclear Magnetic Resonance (NMR) Spectroscopy

The main objective of this work was to investigate the electrostatic interaction between lysolecithin and chitosan in two-layer tuna oil-in-water emulsions using nuclear magnetic resonance (NMR) spectroscopy. The influence of chitosan concentration on the stability and properties of these emulsions was also evaluated. The 5 wt% tuna oil one-layer emulsion (lysolecithin-stabilized oil droplets without chitosan) and two-layer emulsions (lysolecithin-chitosan stabilized oil droplets) containing 5 wt% tuna oil, 1 wt% lysolecithin and various chitosan concentrations (0.025–0.40 wt%) were prepared. The one-dimensional (1D) ³¹P and ¹H NMR spectra of emulsions were then recorded at 25 °C. The results showed that addition of chitosan affected the stability and properties of lysolecithin-stabilized one-layer emulsions. The ³¹P NMR peak of the choline head group on lysolecithin molecules disappeared when chitosan was added at concentrations above neutralization concentration (> 0.05 wt%). The ¹H NMR peak intensity monitoring free amino groups (?NH ₃ ⁺) of chitosan showed a strong positive linear relationship to the chitosan concentration with a high correlation coefficient (R² ≈ 0.99). This ¹H NMR peak in emulsions could not be detected for chitosan in emulsions lower than saturation concentration (< 0.15 wt%). These phenomena indicate an electrostatic interaction between lysolecithin and chitosan at droplet surface in emulsion and were consistent with the results from zeta-potential measurements. The T ₂* relaxation time of the choline head group (N-(CH ₃)₃) signal of lysolecithin also confirmed that lysolecithin-chitosan electrostatic interaction occurs at the surface of oil droplets in two-layer emulsions. The results suggest that NMR spectroscopy can be used as an alternative method for monitoring the electrostatic interaction between surfactant and oppositely charged electrolytes or biopolymers in two-layer emulsions.     

Chitosan-graft poly(p-dioxanone) copolymers: preparation, characterization, and properties

A new biodegradable copolymer of chitosan and poly(p-dioxanone) (PPDO) was prepared through a protection-graft-deprotection procedure using N-phthaloyl-chitosan as an intermediate. PPDO terminated with the isocyanate group was allowed to react with hydroxyl groups of the N-phthaloyl-protected chitosan, and then the phthaloyl group was cleaved to give the free amino groups. The length of PPDO graft chains can be controlled easily by using the prepolymers of PPDO with different molecular weights. The resulting products were thoroughly characterized with FT-IR, ¹H NMR, TG, DSC, SEM, and WAXD. The copolymers were used as drug carriers for sinomenine (7,8-didehydro-4-hydroxy-3,7-dimethoxy-17-methyl-9α,13α,14α-morphinan-6-one) and these exhibited a significant controlled drug-releasing behavior whether in artificial gastric juice or in neutral phosphate buffer solution.     

Preparation, circular dichroism induced helical conformation and optical property of chitosan acid salt complexes for biomedical applications

The efficient procedure for preparation of chitosan acid complexes containing aspartic acid, benzilic acid and terephthalic acid moieties in isopropyl alcohol under mild condition has been demonstrated. The ionic complexation between chitosan and the acid is confirmed by FTIR and ¹H NMR spectroscopy. The circular dichroism (CD) spectra of chitosan/aspartic acid complex showed negative (at λ = 312) band, chitosan/benzilic acid and chitosan/terephthalic complexes showed positive (at λ = 286 and 315 nm) band in DMSO, indicating that the polymers adopted helical (left-handed and last two right-handed) secondary structure. The inversion of the CD pattern in chitosan acid salt complexes suggests that there is a change in the chiral structure of the polymer system. Some physical properties and surface morphology were analyzed by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetry (TG) and scanning electron microscopy (SEM). Optical properties of chitosan derivatives are evaluated by photoluminescence (PL) spectroscopy which showed red shift. The introduction of acid moieties into chitosan increases the solubility in most of the organic solvents, which opens new perspectives for the employment of chitosan-based biohybrid in biomedical applications.     

Design,synthesis, evaluation,and molecular docking of ursolic acid derivatives containing a nitrogen heterocycle as anti-inflammatory agents

Ursolic acid derivatives containing oxadiazole, triazolone, and piperazine moieties were synthesized in an attempt to develop potent anti-inflammatory agents. Structures of the synthesized compounds were elucidated by ¹H NMR, ¹³C NMR, and HRMS. Most of the synthesized compounds showed pronounced anti-inflammatory effects at 100?mg/kg. In particular, compound 11b, which displayed the most potent anti-inflammatory activity of all of the compounds prepared, with 69.76% inhibition after intraperitoneal administration, was more potent than the reference drugs indomethacin and ibuprofen. The cytotoxicity of the compounds was also assessed by the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) assay, and no compounds showed any appreciable cytotoxic activity (IC₅₀ >100?μmol/L). Furthermore, molecular docking studies of the synthesized compounds were performed to rationalize the obtained biological results. Overall, the results indicate that compound 11b could be a therapeutic candidate for the treatment of inflammation.     

Sulfonation of papain-treated chitosan and its mechanism for anticoagulant activity

The novel low-molecular-weight chitosan polysulfate (MW 5120-26,200 Da) was prepared using the depolymerization of chitosan with papain (EC. 3.4.22.2). The sulfonation of depolymerized products was performed using chlorosulfonic acid in N,N-dimethylformamide under semi-heterogeneous conditions. The structures of the products were characterized by FTIR, ¹³C NMR, and ¹H NMR (1D, 2D NMR) spectroscopy. The present study sheds light on the mechanism of anticoagulant activity of chitosan polysulfate. Anticoagulant activity was investigated by an activated partial thromboplastin assay, a thrombin time assay, a prothrombin time assay, and thrombelastography. Surface plasmon resonance also provided valuable data for understanding the relationship between the molecular binding of sulfated chitosan to two important blood clotting regulators, antithrombin III and heparin cofactor II. These results show that the principal mechanism by which this chitosan polysulfate exhibits anticoagulant activity is mediated through heparin cofactor II and is dependent on polysaccharide molecular weight.     

Novel 3-pyridinecarbonitriles incorporating sulfonamide moieties as anti-breast cancer agents

A novel series of 3-pyridinecarbonitrile derivatives incorporating sulfonamide moieties and sulfonyl derivatives was synthesized using 2-chloro-6-methylnicotinonitrile as a strategic starting material. The structures of the synthesized compounds were elucidated on the basis of elemental analysis, IR, ¹H NMR, ¹³C NMR, and mass spectral data. All the prepared compounds were evaluated for their in vitro anticancer activity against breast cancer cell line (MCF-7). Most of the compounds showed good to moderate activity, higher than that of the reference drug doxorubicin. Two compounds showed the same activity as doxorubicin, while three compounds exhibited remarkable activity.