Biodendrimer-based hydrogel scaffolds for cartilage tissue repair

Photo-crosslinkable dendritic macromolecules are attractive materials for the preparation of cartilage tissue engineering scaffolds that may be optimized for in situ formation of hydrated, mechanically stable, and well-integrated hydrogel scaffolds supporting chondrocytes and chondrogenesis. We designed and synthesized a novel hydrogel scaffold for cartilage repair, based on a multivalent and water-soluble tri-block copolymer consisting of a poly(ethylene glycol) core and methacrylated poly(glycerol succinic acid) dendrimer terminal blocks. The terminal methacrylates allow mild and biocompatible photo-crosslinking with a visible light, facilitating in vivo filling of irregularly shaped defects with the dendrimer-based scaffold. The multivalent dendrimer constituents allow high crosslink densities that inhibit swelling after crosslinking while simultaneously introducing biodegradation sites. The mechanical properties and water content of the hydrogel can easily be tuned by changing the biodendrimer concentration. In vitro chondrocyte encapsulation studies demonstrate significant synthesis of neocartilaginous material, containing proteoglycans and type II collagen.     

“Development and Evaluation of Sodium Alginate–Polyacrylamide Graft–Co-polymer-Based Stomach Targeted Hydrogels of Famotidine”

In the present study, grafting technology has been used to develop novel grafted hydrogel beads as controlled drug delivery carriers. The chemical crosslinking and grafting of polyacrylamide onto sodium alginate has been found to be efficient method for the development of new polymeric carrier. The successful crosslinking has been confirmed by Fourier transformed infrared spectroscopy, thermogravimetric analysis, and elemental analysis. The polymeric network of sodium alginate–co-polyacrylamide (NaAlg-g-PAM) has been interlinked by covalent and hydrogen bonds which also strength the gel network. Simple ionotropic gelation method has been used for the preparation of NaAlg-g-PAM hydrogel beads. Its swelling and gelation were dependent on monomer and crosslinker concentrations. Entrapment of the drug moiety (famotidine; an antiulcer drug) within the grafted beads has been confirmed by X-ray powder diffraction and differential scanning calorimetry. More than 75% of drug loading in beads occurred with the increase of monomer and crosslinker concentration. In vitro drug release was found to be sustained up to the 12 h with 80% drug release.Key words: crosslinking, grafting, hydrogel beads, mechanical strength, polyacrylamide     

Preparation of pH- and ionic-strength responsive biodegradable fumaric acid crosslinked carboxymethyl cellulose

A novel biodegradable sodium carboxymethyl cellulose (NaCMC)-based hydrogel was synthesized by using fumaric acid (FA) as a crosslinking agent at various ratios. Hydrogels (CMCF) were characterized using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Swelling behaviors of hydrogels were investigated in distilled water, various salt, and pH solutions. The FTIR results indicated the crosslinking between carboxyl groups of FA with hydroxyl group of NaCMC through ester formation. AFM analyses showed that roughness of hydrogel surface decreased with increasing crosslinker concentration. The swelling capacity decreased with an increase in charge of the metal cation (Al(3+)相似文献   

Preparation and characterization of a novel pachyman-based pharmaceutical aid. II: A pH-sensitive,biodegradable and biocompatible hydrogel for controlled release of protein drugs

In this investigation, the fabrication, physico-chemical and biological characterization of a novel smart hydrogel had been evaluated for its potentials in effective controlling protein delivery. The hydrophilic pachyman-based hydrogel was generated facilely by crosslinking hydrosoluble carboxymethyl pachyman (CMP) with epichlorohydrin (ECH). The ECH concentration possessing maximum (99.7%) encapsulation efficiency and the most appropriate swelling characteristics was found to be 1.25% (w/v). The resultant hydrogel exhibited swelling ratios most favorable for drug release in simulated intestinal media. It could release two model protein drugs (bovine serum albumin and lysozyme) in the controlled manner and with full preservation of the protein stability and enzymatic activity. Importantly, the ECH-CMP hydrogel was confirmed to be biocompatible and biodegradable. From these findings, we were able to conclude that the synthesized pachyman-based hydrogel would be a promising delivery carrier candidate for site-specific delivery of protein drugs.     

Preparation and Characterization of Electrospun PLCL/Poloxamer Nanofibers and Dextran/Gelatin Hydrogels for Skin Tissue Engineering

In this study, two different biomaterials were fabricated and their potential use as a bilayer scaffold for skin tissue engineering applications was assessed. The upper layer biomaterial was a Poly(ε-caprolactone-co-lactide)/Poloxamer (PLCL/Poloxamer) nanofiber membrane fabricated using electrospinning technology. The PLCL/Poloxamer nanofibers (PLCL/Poloxamer, 9/1) exhibited strong mechanical properties (stress/strain values of 9.37±0.38 MPa/187.43±10.66%) and good biocompatibility to support adipose-derived stem cells proliferation. The lower layer biomaterial was a hydrogel composed of 10% dextran and 20% gelatin without the addition of a chemical crosslinking agent. The 5/5 dextran/gelatin hydrogel displayed high swelling property, good compressive strength, capacity to present more than 3 weeks and was able to support cells proliferation. A bilayer scaffold was fabricated using these two materials by underlaying the nanofibers and casting hydrogel to mimic the structure and biological function of native skin tissue. The upper layer membrane provided mechanical support in the scaffold and the lower layer hydrogel provided adequate space to allow cells to proliferate and generate extracellular matrix. The biocompatibility of bilayer scaffold was preliminarily investigated to assess the potential cytotoxicity. The results show that cell viability had not been affected when cocultured with bilayer scaffold. As a consequence, the bilayer scaffold composed of PLCL/Poloxamer nanofibers and dextran/gelatin hydrogels is biocompatible and possesses its potentially high application prospect in the field of skin tissue engineering.     

Gamma-ray crosslinking of poly(3-hydroxyoctanoate-co-undecenoate)

The gamma-ray crosslinking of films made of poly(3-hydroxyoctanoate) containing undecenoate moieties (up to 33 mole%) were studied. X-ray diffraction, thermal analysis, dynamic mechanical analysis (DMA), solid state nuclear magnetic resonance (NMR) spectroscopy and degree of crosslinking (swelling analysis) as a function of irradiation dose were evaluated for treatments in air or in N(2) atmosphere. After uncrosslinked material was isolated by CHCl(3) extraction, solid state NMR data suggested that only a small percentage of the double bonds took part in the formation of irradiation crosslinks. Crosslinking in N(2) was more efficient than in air and a 20 kGy dose was sufficient for optimal crosslinking. The X-ray diffraction patterns of the polymer films were unaffected by moderate irradiation. The use of sodium hypochlorite to isolate poly(3-hydroxyoctanoate-co-undecenoate) samples resulted in partial chlorination of the double bonds and considerable depolymerization.     

Poly (l-lysine) based semi-interpenetrating polymer network as pH-responsive hydrogel for controlled release of a model protein drug streptokinase

With the aim of developing a pH-sensitive controlled drug release system, a poly (L-lysine) (PLL) based cationic semi-interpenetrating polymer network (semi-IPN) has been synthesized. This cationic hydrogel was designed to swell at lower pH and de-swell at higher pH and therefore be applicable for achieving regulated drug release at a specific pH range. In addition to the pH sensitivity, this hydrogel was anticipated to interact with an ionic drug, providing another means to regulate the release rate of ionic drugs. This semi-IPN hydrogel was prepared using a free-radical polymerization method and by crosslinking of the polyethylene glycol (PEG)-methacrylate polymer through the PLL network. The two polymers were penetrated with each other via interpolymer complexation to yield the semi-IPN structures. The PLL hydrogel thus prepared showed dynamic swelling/de-swelling behavior in response to pH change, and such a behavior was influenced by both the concentrations of PLL and PEG-methacrylate. Drug release from this semi-IPN hydrogel was also investigated using a model protein drug, streptokinase. Streptokinase release was found to be dependent on its ionic interaction with the PLL backbones as well as on the swelling of the semi-IPN hydrogel. These results suggest that a PLL semi-IPN hydrogel could potentially be used as a drug delivery platform to modulate drug release by pH-sensitivity and ionic interaction.     

明胶/海藻酸钠/沙蒿胶复合水凝胶的制备及表征

为探究明胶（G）、海藻酸钠（SA）,沙蒿胶（ASKG）对复合水凝胶的力学性能、溶胀和保湿性能的影响,采用共混-离子交联法制备海藻酸钠/明胶/沙蒿胶复合水凝胶,并对制得的水凝胶进行结构表征和溶血率测试。结果表明:当G质量分数为2.5%,SA为1.5%,ASKG为0.7%时,复合水凝胶压缩强度达到427.2 kPa,拉伸强度达到563.449 kPa,断裂伸长率为117%,溶胀率为744%,且具有较好的保湿性能。红外光谱表明,由于沙蒿胶中存在大量羟基,因此加入沙蒿胶后在3 300 cm^-1～3 600 cm^-1羟基峰形变宽。G/SA/ASKG复合水凝胶溶血率低于5%,具有较好的网络孔结构和血液相容性,为复合水凝胶在医用敷料方面的应用提供一定的参考价值。     

Study of the near-neutral pH-sensitivity of chitosan/gelatin hydrogels by turbidimetry and microcantilever deflection

The fundamental properties and pH-sensitivity of chitosan/gelating hydrogels were investigated using spectroscopic and microelectro mechanical (MEMS) measurement approaches. Turbidimetric titration revealed that there were electrostatic attractive interactions between tripolyphosphate (TPP), chitosan, and gelatin in the acidic pH range, depending on their degree of ionization. The pH-sensitive swelling behavior of the hydrogels was investigated by monitoring the deflection of hydrogel-coated microcantilevers, which exhibited a sensitive and repeatable response to solution pH. The deflection of the microcantilever increased as the pH decreased, and the response speed of the system exhibited a nearly linear relationship with pH. The effects of the pH and concentration of TPP solution, as well as the ratio of chitosan to gelatin in gel precursor solutions, on the pH sensitivity of the hydrogels were also investigated. It was found that the swelling of the hydrogel is mainly a result of chain relaxation of chitosan-TPP complexes caused by protonation of free amino groups in chitosan, which depends on the crosslinking density set during the formation of the network. An increase in initial crosslink density induced a decrease in swelling and pH sensitivity. It can be concluded from this study that pH-sensitive chitosan gel properties can be tuned by preparatory conditions and inclusion of gelatin. Furthermore, microcantilevers can be used as a platform for gaining increased understanding of environmentally sensitive polymers.     

An Investigation and Characterization on Alginate Hydogel Dressing Loaded with Metronidazole Prepared by Combined Inotropic Gelation and Freeze-Thawing Cycles for Controlled Release

The purpose of this study was to investigate the effect of combined Ca²⁺ cross-linking and freeze-thawing cycle method on metronidazole (model drug) drug release and prepare a wound film dressing with improved swelling property. The hydrogel films were prepared with sodium alginate (SA) using the freeze-thawing method alone or in combination with ionotropic gelation with CaCl₂. The gel properties such as morphology, swelling, film thickness, and content uniformity and in vitro dissolution profiles using Franz diffusion cell were investigated. The cross-linking process was confirmed by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. In vitro protein adsorption test, in vivo wound-healing test, and histopathology were also performed. The hydrogel (F2) composed of 6% sodium alginate and 1% metronidazole prepared by combined Ca²⁺ cross-linking and freeze-thawing cycles showed good swelling. This will help to provide moist environment at the wound site. With the in vivo wound-healing and histological studies, F2 was found to improve the wound-healing effect compared with the hydrogel without the drug, and the conventional product.KEY WORDS: alginate, Ca²⁺ cross-linking, freeze-thawing, swelling, wound dressing     

Synthesis and characterization of pH-sensitive hydrogel composed of carboxymethyl chitosan for colon targeted delivery of ornidazole

In the present study, carboxymethyl chitosan was prepared from chitosan, crosslinked with glutaraldehyde and evaluated in vitro as a potential carrier for colon targeted drug delivery of ornidazole. Ornidazole was incorporated at the time of crosslinking of carboxymethyl chitosan. The chitosan was evaluated for its degree of deacetylation (DD) and average molecular weight; which were found to be 84.6% and 3.5×10(4) Da, respectively. The degree of substitution on prepared carboxymethyl chitosan was found to be 0.68. All hydrogel formulations showed more than 85% and 74% yield and drug loading, respectively. The swelling behaviour of prepared hydrogels checked in different pH values, 1.2, 6.8 and 7.4, indicated pH responsive swelling characteristic with very less swelling at pH 1.2 and quick swelling at pH 6.8 followed by linear swelling at pH 7.4 with slight increase. In vitro release profile was carried out at the same conditions as in swelling and drug release was found to be dependant on swelling of hydrogels and showed biphasic release pattern with non-fickian diffusion kinetics at higher pH. The carboxymethylation of chitosan, entrapment of drug and its interaction in prepared hydrogels were checked by FTIR, (1)H NMR, DSC and p-XRD studies, which confirmed formation of carboxymethyl chitosan from chitosan and absence of any significant chemical change in ornidazole after being entrapped in crosslinked hydrogel formulations. The surface morphology of formulation S6 checked before and after dissolution, revealed open channel like pores formation after dissolution.     

Functional nucleus pulposus-like matrix assembly by human mesenchymal stromal cells is directed by macromer concentration in photocrosslinked carboxymethylcellulose hydrogels

Intervertebral disc (IVD) degeneration is associated with several pathophysiologic changes of the IVD, including dehydration of the nucleus pulposus (NP). Tissue engineering strategies may be used to restore both biological and mechanical function of the IVD following removal of NP tissue during surgical intervention. Recently, photocrosslinked carboxymethylcellulose (CMC) hydrogels were shown to support chondrogenic, NP-like extracellular matrix (ECM) elaboration by human mesenchymal stromal cells (hMSCs) when supplemented with TGF-β3; however, mechanical properties of these constructs did not reach native values. Fabrication parameters (i.e., composition, crosslinking density) can influence the bulk mechanical properties of hydrogel scaffolds, as well as cellular behavior and differentiation patterns. The objective of this study was to evaluate the influence of CMC macromer concentration (1.5, 2.5 and 3.5 % weight/volume) on bulk hydrogel properties and NP-like matrix elaboration by hMSCs. The lowest macromer concentration of 1.5 % exhibited the highest gene expression levels of aggrecan and collagen II at day 7, corresponding with the largest accumulation of glycosaminoglycans and collagen II by day 42. The ECM elaboration in the 1.5 % constructs was more homogeneously distributed compared to primarily pericellular localization in 3.5 % gels. The 1.5 % gels also displayed significant improvements in mechanical functionality by day 42 compared to earlier time points, which was not seen in the other groups. The effects of macromer concentration on matrix accumulation and organization are likely attributed to quantifiable differences in polymer crosslinking density and diffusive properties between the various hydrogel formulations. Taken together, these results demonstrate that macromer concentration of CMC hydrogels can direct hMSC matrix elaboration, such that a lower polymer concentration allows for greater NP-like ECM assembly and improvement of mechanical properties over time.     

A biomimetic chitosan composite with improved mechanical properties in wet conditions

Chitosan is one of the most widely used structural polymers for biomedical applications because it has many favorable properties. However, one of the most critical drawbacks regarding the use of chitosan as a biomedical material is its poor mechanical properties in wet conditions. Here, we designed a method to improve the mechanical properties of chitosan in wet conditions and minimized the swelling behavior of chitosan film due to water adsorption by mimicking the sclerotization of insect cuticles and squid beaks, that is, catechol‐meditated crosslinking. The biomimetic chitosan composite film was prepared by mixing chitosan with l ‐3,4‐dihydroxyphenylalanine (DOPA) as a catecholic crosslinker and sodium periodate as an oxidant. The catechol‐meditated crosslinking provided a sevenfold enhancement in the stiffness in wet conditions compared to pure chitosan films and reduced the swelling behavior of the chitosan film. This strategy expands the possible applications for the use of chitosan composites as load‐bearing biomaterials. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29: 505–512, 2013     

Alginate and pectin composite films crosslinked with Ca ions: Effect of the plasticizer concentration

The manufacture of composite biofilms of alginate and LM-pectin crosslinked with calcium ions requires a two-step contact with Ca²⁺: initially a low-structured pre-film is formatted which is further crosslinked in a second contact with a more concentrated Ca²⁺ solution containing plasticizer. This research evaluated the influence of the plasticizer (glycerol) concentration (1–15% w/v) in this finishing reticulation step on final films characteristics. The results indicated that the extent of the simultaneous Ca²⁺ crosslinking and plasticization with glycerol was determined by the level of structural organization obtained in the pre-reticulation. Increasing the glycerol concentration of the crosslinking solution increased film solubility in water, moisture content, volumetric swelling and flexibility and decreased the resistance to tensile stress. Transparent alginate and pectin composite films with acceptable mechanical properties, low solubility and limited degree of swelling were obtained with 10% glycerol in the second contact solution.     

Preparation and properties of a pH/temperature-responsive carboxymethyl chitosan/poly(N-isopropylacrylamide)semi-IPN hydrogel for oral delivery of drugs

Thermo- and pH-responsive semi-IPN polyampholyte hydrogels were prepared by using carboxymethylchitosan and poly(N-isopropylacrylamide) with N,N'-methylenebisacrylamide (BIS) as the crosslinking agent. The swelling characteristics of these hydrogels at distinct compositions as a function of pH and temperature were investigated. It was found that the semi-IPN hydrogels demonstrated the pH- and temperature-responsive nature of the materials, and it also showed good reversibility. The study on the release of coenzyme A (CoA) showed that within 24h the cumulative release ratio of CoA was 22.6% in pH 2.1 solution and 89.1% in pH 7.4 solution at 37 degrees C, respectively. The release rate of CoA was higher at 37 degrees C than 25 degrees C in a pH 7.4 buffer solution. An increased release rate of CoA was observed with the content of carboxymethylchitosan increasing in the hydrogel at 25 degrees C in pH 7.4 solution. These results show that semi-IPN hydrogel seems to be of great promise in pH-temperature oral drug delivery systems.     

Tuning the Hydrophilic/Hydrophobic Balance to Control the Structure of Chitosan Films and Their Protein Release Behavior

The control over the crystallinity of chitosan and chitosan/ovalbumin films can be achieved via an appropriate balance of the hydrophilic/hydrophobic interactions during the film formation process, which then controls the release kinetics of ovalbumin. Chitosan films were prepared by solvent casting. The presence of the anhydrous allomorph can be viewed as a probe of the hydrophobic conditions at the neutralization step. The semicrystalline structure, the swelling behavior of the films, the protein/chitosan interactions, and the release behavior of the films were impacted by the DA and the film processing parameters. At low DAs, the chitosan films neutralized in the solid state corresponded to the most hydrophobic environment, inducing the crystallization of the anhydrous allomorph with and without protein. The most hydrophilic conditions, leading to the hydrated allomorph, corresponded to non-neutralized films for the highest DAs. For the non-neutralized chitosan acetate (amorphous) films, the swelling increased when the DA decreased, whereas for the neutralized chitosan films, the swelling decreased. The in vitro release of ovalbumin (model protein) from chitosan films was controlled by their swelling behavior. For fast swelling films (DA?=?45%), a burst effect was observed. On the contrary, a lag time was evidenced for DA?=?2.5% with a limited release of the protein. Furthermore, by blending chitosans (DA?=?2.5% and 45%), the release behavior was improved by reducing the burst effect and the lag time. The secondary structure of ovalbumin was partially maintained in the solid state, and the ovalbumin was released under its native form.     

Modeling and simulation of the swelling behavior of pH-stimulus-responsive hydrogels

The modulation of the swelling ability of the hydrogel matrix by pH-stimulus enables the dynamic control of the swelling forces, thereby obtaining effective diffusivity and permeability of the solutes, or mechanical energy from the hydrogel. In this work, a chemo-electro-mechanical model describing hydrogel behavior, based on multi-field effects, is developed to simulate the swelling and shrinking of these fascinating bio-materials, and it is termed the multi-effect-coupling pH-stimulus (MECpH) model. This model accounts for the ionic fluxes within both the hydrogel and solution, the coupling between the electric field, ionic fluxes, and mechanical deformations of the hydrogel. The main contribution of this model is to incorporate the relationship between the concentrations of the ionized fixed-charge groups and the diffusive hydrogen ion, which follows a Langmuir isotherm, into the Poisson-Nernst-Planck system. To validate this MECpH model, one-dimensional steady-state simulations under varying pH solution are carried out via a meshless Hermite-Cloud methodology, and the numerical results are compared with available experimental data. It is shown that the presently developed MECpH model is accurate, efficient, and numerically stable.     

Controlled hydrogel formation of a recombinant spider silk protein

Due to their biocompatibility, biodegradability, and low immunogenicity, recombinant spider silk proteins have a high potential for a variety of applications when processed into morphologies such as films, capsules, beads, or hydrogels. Here, hydrogels made of the engineered and recombinantly produced spider silk protein eADF4(C16) were analyzed in detail. It has previously been shown that eADF4(C16) nanofibrils self-assemble by a mechanism of nucleation-aggregation, providing the basis of silk hydrogels. We focused on establishing a reproducible gelation process by employing different protein concentrations, chemical crosslinking, and functionalization of eADF4(C16) with fluorescein. Fluorescein strongly influenced assembly as well as the properties of the hydrogels, such as pore sizes and mechanical behavior, possibly due to its interference with packing of silk nanofibrils during hydrogel formation.     

A new amphoteric superabsorbent hydrogel based on sodium starch sulfate

A new amphoteric superabsorbent hydrogels were synthesized by graft copolymerization blending based on acrylamide (AM), diallydimethylammonium chloride (DMDAAC) and sodium starch sulfate (SSS). The effect of polymerization conditions on swelling capacity was investigated. The results showed that the swelling capacity was affected by various factors, such as polymerization temperature, concentration of initiator and crosslinker, and dose of AM. Additionally, the results testified that salt bond was a potential crosslinking factor in the amphoteric hydrogel. The maximum swelling capacity in distilled water and saline solution reached 1493.1 and 91.0 g/g, respectively. These results were compared with those obtained from original starch-based hydrogel.     

Application of Chitin Hydrogels for Seed Germination,Seedling Growth of Rapeseed

Chitin hydrogels were successfully prepared from chitin solution dissolved in NaOH/urea aqueous solution at low temperature by crosslinking with epichlorohydrin. The experimental results indicated that the chitin hydrogels were hydrophilic, had a microporous structure, and had a large surface area, leading to excellent water uptake ability and water-retention properties. Moreover, they exhibited good mechanical properties and a high equilibrium swelling ratio. The growth indexes of rapeseed, including the germination rate, root length, shoot length, fresh weight and dry weight, for chitin hydrogel (CG2) were not significantly different from those of soil and significantly higher than agar. Chitin hydrogel as a plant growth regulator could promote seed germination and growth when applied to Brassica napus rapeseed sowing. Moreover, chitin was safe and biodegradable so it would be suitable to use as soilless culture media for plant growth. This work provided a new pathway for the application of chitin hydrogels in the agriculture field.