Encapsulated boron as an osteoinductive agent for bone scaffolds

The aim of this study was to develop boron (B)-releasing polymeric scaffold to promote regeneration of bone tissue. Boric acid-doped chitosan nanoparticles with a diameter of approx. 175 nm were produced by tripolyphosphate (TPP)-initiated ionic gelation process. The nanoparticles strongly attached via electrostatic interactions into chitosan scaffolds produced by freeze-drying with approx. 100 μm pore diameter. According to the ICP-OES results, following first 5 h initial burst release, fast release of B from scaffolds was observed for 24 h incubation period in conditioned medium. Then, slow release of B was performed over 120 h. The results of the cell culture studies proved that the encapsulated boron within the scaffolds can be used as an osteoinductive agent by showing its positive effects on the proliferation and differentiation of MC3T3-E1 preosteoblastic cells.     

Effect of cryopreservation and microencapsulation of lactic acid bacterium Enterococcus faecium MC13 for long-term storage

The aim of this work was to investigate the effect of cryoprotectants on the survival of probiotic bacterium Enterococcus faecium MC13 during freeze drying and storage. The maximum relative cell viabilities were observed when cells were freeze dried and stored at −20 °C, which is optimum temperature for the preservation of E. faecium. At all storage temperatures, trehalose was found to be retaining the highest relative cell viability than other cryoprotectants. In addition, alginate–chitosan capsules were produced to encapsulate E. faecium with the aim of enhancing survival of probiotic cells and keeping the probiotic during exposure to the harsh gastro-intestinal conditions. Encapsulation of probiotic into alginate–chitosan capsules found to be retaining higher survival of probiotic cells (4.342 ± 0.26 Log CFU mL⁻¹) at −20 °C for six months. Microencapsulated cells were resistant to simulated gastric (pH 2.0) and intestinal fluids (pH 7.5), resulting in significantly enhanced survival when compared with free cells. During in vivo treatment, capsules were broken and probiotic cells were directly released into the intestinal tract of rat. This result showed that microencapsulation of E. faecium MC13 with alginate and a chitosan coating offers an effective means of delivery of viable cells to the colon and maintains their survival during the adverse gastro-intestinal conditions.     

Synergism of three-drug combinations of sanguinarine and other plant secondary metabolites with digitonin and doxorubicin in multi-drug resistant cancer cells

We determined the ability of some phytochemicals, including alkaloids (glaucine, harmine, and sanguinarine), phenolics (EGCG and thymol), and terpenoids (menthol, aromadendrene, β-sitosterol-O-glucoside, and β-carotene), alone or in combination with the saponin digitonin to reverse the relative multi-drug resistance of Caco-2 and CEM/ADR5000 cells to the chemotherapeutical agent doxorubicin. The IC₅₀ of doxorubicin in Caco-2 and CEM/ADR5000 was 4.22 and 44.08 μM, respectively. Combination of non-toxic concentrations of individual secondary metabolite with doxorubicin synergistically sensitized Caco-2 and CEM/ADR5000 cells, and significantly enhanced the cytotoxicity of doxorubicin. Furthermore, three-drug combinations (secondary metabolite + digitonin + doxorubicin) were even more powerful. The best synergist was the benzophenanthridine alkaloid sanguinarine. It reduced the IC₅₀ value of doxorubicin 17.58-fold in two-drug combinations (sanguinarine + doxorubicin) and even 35.17-fold in three-drug combinations (sanguinarine + digitonin + doxorubicin) in Caco-2 cells. Thus synergistic drug combinations offer the possibility to enhance doxorubicin efficacy in chemotherapy.     

Characterization and evaluation of hydrophobically modified chitosan scaffolds: Towards design of enzyme immobilized flow-through electrodes

Chitosan scaffolds were fabricated by application of thermally induced phase separation from aqueous solutions of unmodified chitosan and hydrophobically modified chitosan polymer. The final pore structure, in terms of diameter and geometry, were correlated to freezing temperature and freezing time for both the unmodified and hydrophobically modified chitosan polymer. Results showed that the resulting pore structure is strongly dependent upon the freezing temperature and less dependant upon the freezing time. For scaffolds produced from unmodified chitosan, the pore size decreased as expected with decreasing freezing temperature from ?5 °C to ?10 °C. However, an inconsistency in this trend was observed as the freezing temperature was decreased to ?20 °C. Combined analysis of pore size distribution and average pore diameter suggested that the freezing process was mainly mass transfer dominated at ?5 °C and ?10 °C, but principally heat transfer dominated at ?20 °C. In comparison, the scaffolds produced from hydrophobically modified chitosan (butyl-chitosan) followed the expected trend of decreasing mean pore diameter with decreased freezing temperatures throughout the entire temperature range. The scaffolds produced from the unmodified chitosan were more stable and rigid, and possessed average pore diameters that were generally smaller than those fabricated from the hydrophobically modified chitosan. The generally larger pores in the butyl-modified chitosan scaffolds might be explained by increased phase separation rates due to the introduced hydrophobicity of the chitosan polymer. Among the scaffolds fabricated from the butyl-modified chitosan, those produced at ?20 °C yielded the most uniform pore structure, the smallest average pore diameters, and the least temporal broadening of pore size distribution.     

Antifungal potentiality of mycogenic silver nanoparticles capped with chitosan produced by endophytic Amesia atrobrunnea

This research reports the fabrication of silver nanoparticles (AgNPs) from endophytic fungus, Amesia atrobrunnea isolated from Ziziphus spina-christi (L.). Influencing factors for instance, thermal degree of incubation, media, pH, and silver nitrate (AgNO₃) molarity were optimized. Then, the AgNPs were encapsulated with chitosan (Ch-AgNPs) under microwave heating at 650 W for 90 s. Characterization of nanoparticles was performed via UV–visible (UV–vis) spectrophotometer, Fourier-transform infrared spectrophotometer (FTIR), zeta potential using dynamic-light scattering (DLS), and field-emission-scanning electron microscope (FE-SEM). Anti-fungal activity of Ch-AgNPs at (50, 25, 12.5, 6.25 mg/L) was tested against Fusarium oxysporum, Curvularia lunata, and Aspergillus niger using the mycelial growth inhibition method (MGI). Results indicated that Czapek-dox broth (CDB) with 1 mM AgNO₃, an acidic pH, and a temperature of 25–30 °C were the optimum for AgNPs synthesis. (UV–vis) showed the highest peak at 435 nm, whereas Ch-AgNPs showed one peak for AgNPs at 405 nm and another peak for chitosan at 230 nm. FTIR analysis confirmed that the capping agent chitosan was successfully incorporated and interacted with the AgNPs through amide functionalities. Z-potential was −19.7 mV for AgNPs and 38.9 mV for Ch-AgNPs, which confirmed the significant stability enhancement after capping. FES-SEM showed spherical AgNPs and a reduction in the nanoparticle size to 44.65 nm after capping with chitosan. The highest mycelial growth reduction using fabricated Ch-AgNPs was 93% for C. lunata followed by 77% for A. niger and 66% F. oxysporum at (50 mg/L). Biosynthesis of AgNPs using A. atrobrunnea cell-free extract was successful. Capping with chitosan exhibited antifungal activity against fungal pathogens.     

Preparation and pharmacodynamics of low-molecular-weight chitosan nanoparticles containing insulin

Low-molecular-weight chitosan (LMWC) was obtained by enzymatic degradation and ultrafiltration separation. LMWC nanoparticles with LMWC having 20 kDa weight average molecular weight (M_w) were then prepared by solvent evaporation method. The resultant nanoparticles were spherical with a narrow particle size distribution. LMWC nanoparticles loaded with insulin as a model drug were prepared. The average entrapment efficiency of insulin could reach up to 95.54%. The in vitro drug release profiles from the nanoparticles showed an initial burst of release in the first 2 h, followed by zero order release kinetics. In vivo pharmacodynamics of chitosan nanoparticles containing insulin showed that the nanoparticles showed some hypoglycemic activity. Compared with an insulin solution, a relative bioavailability of 0.737 was observed for four times the dosage of insulin in the chitosan nanoparticles after pulmonary administration.     

Polydimethylsiloxane modified chitosan. Part III: Preparation and characterization of hybrid membranes

The paper deals with the synthesis of organic–inorganic hybrid membranes, Hy, obtained by simultaneous grafting and crosslinking of chitosan with epoxy-terminated polydimethylsiloxane and γ-glycidoxypropyltrimethoxysilane. Porous membranes, HyP, were also obtained by acid decomposition, at different temperatures (25 and 50 °C), of calcium carbonate porogenic agent trapped inside the material. As proved by electron and atomic force microscopy, the non-porous membrane is a phase segregated material with spherical domains (10–40 μm) of silica core covered by hydrophobic siloxane in a hydrophilic chitosan matrix. The porous membranes showed different morphologies with irregular circular pores of 10–30 μm diameters for the membranes obtained at lower temperature, while the membranes prepared at 50 °C tend to adopt a plan-parallel porosity. The water contact angles of hybrid membranes (78°) and pure chitosan membranes (72°) indicated a lower hydrophilic character of modified chitosan. As a result of the crosslinking and of increased hydrophobicity, the hybrid membranes were characterized by a smaller water swelling degree (about 30%) as compared to pure chitosan membrane (700%). However, the presence of the pores in HyP membranes determined an increase of the water adsorption (maximum swelling degree, about 100%). The hybrid membranes possess a slightly higher thermal stability as compared to chitosan (first initial decomposition temperature, 147 and 175 °C for chitosan and hybrid membranes, respectively), but a lower one as compared to pure polydimethylsiloxane. The high storage modulus of chitosan (about 5.1 × 10⁹ Pa at 20 °C) is decreased by about one order of magnitude by the introduction of the highly flexible polysiloxane and the hybrid membranes are more flexible.     

Preparation of gold nanopowders and nanoparticles using chitosan suspensions

Simple methods for preparation of gold nanopowders and nanoparticles are reported. Gold/chitosan nanoparticles were prepared by using basic chitosan suspension as a dispersant and as a reductant. The resulting nanoparticles were processed by pyrolysis and thus obtain black gold nanopowder. The FESEM images indicate that most diameters of the nanopowder prepared were in the range of 50 and 200 nm. Hydrolysis is another quick decomposition method for chitosan. Acetic acid was adopted to implement the hydrolysis. The AEM images of the auberginic suspension show that the average gold nanoparticle diameter was less than 40 nm with good dispersion. Use of chitosan suspensions can produce gold nanopowder as well as gold nanoparticle without using toxic organic chemicals.     

Synthesis and characterization of a pH-sensitive conjugate of isoniazid with Fe3O4@SiO2 magnetic nanoparticles

The Letter describes the preparation and characterization of a conjugate of isoniazid (INH) with magnetic nanoparticles Fe₃O₄@SiO₂ 115 ± 60 nm in size. The INH molecules were attached to the surface of nanoparticles by a covalent pH-sensitive amidine bond. The conjugate was characterized by X-ray diffraction, SEM, dynamic light scattering, IR spectroscopy and microanalysis. The conjugate released isoniazid under in vitro conditions (pH = 4; 37 °C; t_1/2 ≈ 115 s). In addition, the cytotoxicity of the Fe₃O₄@SiO₂–INH conjugate was evaluated in SK-BR-3 cells using the xCELLigence system.     

Effects of estrous cycle stage and transport temperature of ovaries on in vitro maturation of canine oocytes

Unlike other domestic animals, in vitro maturation (IVM) of canine oocytes still has limited success. The present study investigated the effects of estrous cycle stage and transport temperature of ovaries on in vitro maturation of canine oocytes. The donor bitches were categorized into three groups based on stage of estrus cycle: follicular (proestrus or estrous), luteal (diestrus) and anestrus. One ovary of each pair collected from 39 mature bitches was transported in Phosphate Buffer Saline (PBS) at 4 °C while the other was transported at 37 °C. A total of 1138 Grade I COCs obtained from all ovaries were grouped and matured in modified synthetic oviduct fluid (mSOF) supplemented with follicle stimulating hormone (FSH), luteinizing hormone (LH), essential and non-essential amino acids at 38.5 °C in a humidified 5% CO₂, 5% O₂, and 90% N₂ atmosphere for 72 h. The nuclear maturation rates were evaluated by aceto–orcein staining.Oocytes harvested from follicular and luteal ovaries have a significantly higher maturation rates (MI + MII) than the oocytes from anestrual ovaries in the 37 °C group (p < 0.05). However, oocytes harvested from anestrual ovaries transported at 4 °C had the highest maturation (MI + MII) rate, and the difference between anestrual and luteal ovary groups was significant (p < 0.05). The oocytes from anestrual ovaries transported at 4 °C have significantly higher maturation rates than those transported at 37 °C (p < 0.0001). However, the transport temperature (37 or 4 °C) did not significantly affect the maturation (MI + MII) rates of oocytes harvested from the luteal (p = 0.61) and follicular (p = 0.48) stage ovaries.It can be concluded from this study that (1) both transport temperature and transport temperature × estrus cycle stage interaction effected the maturation rates, while estrus cycle stage alone did not, and (2) transporting canine ovaries at 4 °C can improve in vitro maturation rates in oocytes harvested from anestrous ovaries.     

Chitosan–caffeic acid–genipin films presenting enhanced antioxidant activity and stability in acidic media

The use of chitosan films has been limited due to their high degradability in aqueous acidic media. In order to produce chitosan films with high antioxidant activity and insoluble in acid solutions caffeic acid was grafted to chitosan by a radical mechanism using ammonium cerium (IV) nitrate (60 mM). Genipin was used as cross-linker. This methodology originated films with 80% higher antioxidant activity than the pristine film. Also, these films only lost 11% of their mass upon seven days immersion into an aqueous solution at pH 3.5 under stirring. The films surface wettability (contact angle 105°), mechanical properties (68 MPa of tensile strength and 4% of elongation at break), and thermal stability for temperatures lower than 300 °C were not significantly influenced by the covalent linkage of caffeic acid and genipin to chitosan. Due to their characteristics, mainly higher antioxidant activity and lower solubility, these are promising materials to be used as active films.     

Production of (R)-mandelic acid by immobilized cells of Saccharomyces cerevisiae on chitosan carrier

The asymmetric microbial reduction of phenylglyoxylic acid (PGA) to (R)-mandelic acid ((R)-MA) with immobilized Saccharomyces cerevisiae cells on globular chitosan was studied. The immobilization conditions and characterization of the immobilized cells were carried out. Chitosan–acetic acid solution was injected into a mixture of 20% NaOH and 30% CH₃OH aqueous solution to obtain globular chitosan, and then the globular chitosan was treated with 1% solution of glutaraldehyde to immobilize yeast cells, which were used to synthesize (R)-MA. The optimum conditions were identified as the substrate concentration of 10 mmol L⁻¹, pH of 6.5 and reaction temperature of 30 °C with the yield of 62% for (R)-MA and the enantiomeric excess (e.e.) of 98% for (R)-MA. The immobilized cells showed good operation and storage stability.     

Physicochemical characterization of chitin and chitosan from crab shells

Crab chitosan was prepared by alkaline N-deacetylation of crab chitin for 60, 90 and 120 min and the yields were 30.0-32.2% with that of chitosan C120 being the highest. The degree of N-deacetylation of chitosans (83.3–93.3%) increased but the average molecular weight (483–526 kDa) decreased with the prolonged reaction time. Crab chitosans showed lower lightness and WI values than purified chitin, chitosans CC and CS but higher than crude chitin. With the prolonged reaction time, the nitrogen (8.9–9.5%), carbon (42.2–45.2%) and hydrogen contents (7.9–8.6%) in chitosans prepared consistently increased whereas N/C ratios remained the same (0.21). Crab chitosans prepared showed a melting endothermic peak at 152.3–159.2 °C. Three chitosans showed similar microfibrillar crystalline structure and two crystalline reflections at 2θ = 8.8–9.0° and 18.9–19.1°. Overall, the characteristics of three crab chitosans were unique and differed from those of chitosan CC and CS as evidenced by the element analysis, differential scanning calorimetry, scanning electron microscopy and X-ray diffraction patterns.     

Clarification of passion fruit juice with chitosan: Effects of coagulation process variables and comparison with centrifugation and enzymatic treatments

Clarification is an important step in the fruit juice processing industry. In this study, chitosan from shrimp shells is proposed as an alternative aid for passion fruit juice clarification being a natural and environmental friendly adsorbent. Experiments were carried out in Jar tests varying chitosan concentration, pH, and slow velocity speed and time. The obtained results were evaluated in terms of turbidity, color, total soluble solids (TSSs), and viscosity reductions. The best condition found in these tests for chitosan treatment was compared with centrifugation and enzymatic treatments. Two different rotation speeds (4000 and 12,000 rpm) were applied for the centrifugation process. Enzymatic treatment was carried out with 1 mL L^?1 of Pectinex 3X L (Novo Nordisk, Switzerland) for 90 min, at 50 °C. The enzymatic treatment was reliable only for viscosity reduction, while the chitosan treatment after a mild centrifugation showed the best result for passion fruit clarification.     

Analysis of digestion of rice planthopper by Pardosa pseudoannulata based on CO-I gene

In order to systematically study the predatory behavior and digestion regularity of spiders, real-time fluorescence quantification PCR technique was used to detect the number of CO-I genes in Pardosa pseudoannulata after it preyed on rice planthoppers in different temperatures within different periods. At 28 °C, 0, 1, 2, 4, 8, 16, and 24 h after P. pseudoannulata preyed on rich planthopper, DNA was extracted from cephalothorax and abdomen of P. pseudoannulata. Routine PCR and real-time fluorescence PCR techniques were employed for CO-I gene amplification. The results show that: The prey liquid was temporarily stored in the sucking stomach of the spider head within 2 h after prey, and gradually transferred to the midgut of the abdomen with the prolongation of time. After 4 h, CO-I gene residues of rice planthopper in the cephalothorax gradually decreased. The CO-I gene of rice planthopper was basically transferred to the abdomen after 16 h. During 0–1 h, food contained in abdominal midgut and other digestive organs was very small, CO-I gene detection was not obvious. Over time, food entered into the midgut from the sucking stomach for digestion. During 2–4 h, CO-I gene amount increased, at 2–4 h, detected CO-I gene residue reached the peak; but rapidly declined after 8, 16, and 24 h, even it is still detectable. The results at different temperatures reveal that: As the temperature increased from 26 °C to 32 °C, CO-I gene residues of rich planthopper in cephalothorax and abdomen of P. pseudoannulata gradually decreased, which indicated that the digestion rate increased with the increase of temperature with some range. However, when the temperature continued to increase to 34 °C, the digestion rate decreased.     

Ethyl isovalerate synthesis using Candida rugosa lipase immobilized on silica nanoparticles prepared in nonionic reverse micelles

Uniform and monodispersed silica nanoparticles were synthesized with a mean diameter of 100 ± 20 nm as analyzed by Transmission Electron Microscopy (TEM). Glutaraldehyde was used as a coupling agent for efficient binding of the lipase onto the silica nanoparticles. For the hydrolysis of pNPP at pH 7.2, the activation energy within 25–40 °C for free and immobilized lipase was 7.8 and 1.25 KJ/mol, respectively. The V_max and K_m of immobilized lipase at 25 °C for pNPP hydrolysis were found to be 212 μmol/min/mg and 0.3 mM, whereas those for free lipase were 26.17 μmol/min and 1.427 mM, respectively. The lower activation energy of immobilized lipase in comparison to free lipase suggests a change in conformation of the enzyme leading to a requirement for lower energy on the surface of the nanoparticles. A better yield (7 fold higher) of ethyl isovalerate was observed using lipase immobilized onto silica nanoparticles in comparison to free lipase.     

Evaluation of structure and hydrolysis activity of Candida rugosa Lip7 in presence of sub-/super-critical CO2

This work aimed to assess the effect of sub-/super-critical CO₂ on the structure and activity of Candida rugosa Lip7 (CRL7) in its solution form. The structure was examined by SDS-PAGE gel electrophoresis, circular dichroism (CD) and fluorescence spectra photometry. Results revealed that the primary structure remained intact after sub-/super-critical CO₂ treatment, and the secondary structure altered at the pressure of 10 MPa and temperature 40 °C for 30 min incubation, but it was reflex to its native form with increasing incubation time up to 150 min under 10 MPa and 40 °C. Meanwhile, the tertiary structure via fluorescence spectra analysis showed that the intensity of the maximal emission wavelength at 338 nm decreased under the conditions of 10 MPa and 40 °C for 150 min. Furthermore, the residue hydrolysis activity and kinetics constants (V_max and K_m) of CRL7 treated with sub-/super-critical CO₂ were also investigated. In cases of 6 MPa and 35 °C, or 10 MPa and 40 °C for 30 min, activity variance of CRL7 was maybe caused by its secondary structure alteration. But in case of 10 MPa and 40 °C for 150 min, the tertiary structure change was perhaps responsibility for CRL7 activity enhancement.     

A new bioprocess for the production of prebiotic lactosucrose by an immobilized β-galactosidase

A new bioprocess for the synthesis of lactosucrose was studied using a covalently immobilized β-galactosidase on macrospheres of chitosan. The effects of temperature and pH on the production of lactosucrose and other oligosaccharides were evaluated. At 30 °C and pH 7.0, the maximum concentration of lactosucrose reached to 79 g L⁻¹. The change of the reaction conditions allowed to modify the qualitative profile of the final products without quantitative change in the total of oligosaccharides produced. At pH 7 and 30 °C, products profile was 79 g L⁻¹ of lactosucrose, 37 g L⁻¹ of galactooligosaccharides and 250 g L⁻¹ of total oligosaccharides, while at pH 5 and 64 °C the concentrations for the same compounds were 40, 62 and 250 g L⁻¹, respectively. The immobilization increased the thermal stability up to 260-fold. Using 300 g L⁻¹ of sucrose and 300 g L⁻¹ of lactose, and 8.5 mg of chitosan mL⁻¹, 30 cycles of reuse were performed and the biocatalyst kept the maximal lactosucrose synthesis. These results fulfill some important aspects for the enzyme immobilization and oligosaccharides synthesis: the simplicity of the protocols, the high operational stability of the enzyme and the possibility of driving the final products.     

Hydroxyapatite based biocomposite scaffold: A highly biocompatible material for bone regeneration

The conventional approaches for treating bone defects such as autografts donor tissue shortages and allografts transmission of diseases pose many shortcomings. The objective of this study was to design a nano strontium/magnesium doped hydroxyapatite (Sr/Mg-HA) with chitosan (CTS) and multi-walled carbon nanotubes (MWCNT) (Sr/Mg-HA/MWCNT/CTS) biocomposite was created to support the growth of osteoblasts using a solvent evaporation method. To help the growth of osteoblasts, a solvent evaporation technique was used to design a nano strontium/magnesium doped hydroxyapatite with chitosan and multi-walled carbon nanotubes biocomposite. We studied the biocompatibility and efficiency in vitro of biocomposite following physicochemical analyzes. Tests of biocompatibility, cell proliferation, mineralization, and osteogenic differentiation have shown that in-vitro safety and effectiveness of biocomposite are good. The performance of biocomposite was more efficient in in-vitro as well as in vivo experiments than in Sr/Mg-HA nanoparticles. Briefly, the Sr/Mg-HA/MWCNT/CTS biocomposite is an ideal candidate for effective bone repair in clinics with excellent mechanical properties with durable multi-biofunctional antibacterial properties and osteoinductivity.